The document summarizes the process of weaving fabric using a shuttle loom. It describes how woven fabric is produced by interlacing warp and weft yarns. The key steps in the weaving process are shedding to separate the warp yarns, picking where the shuttle inserts the weft, beat-up which uses a reed to pack the weft tightly against the warp, take-up to wind the woven fabric onto a roller, and let-off to unwind the warp yarns from the beam. The document is authored by Md. Reazul Islam, a textile engineering graduate from Daffodil International University in Bangladesh.

1. Woven Fabric Making Using
Shuttle Loom

2. Woven Fabric:
Woven fabric are
produce by interlacing
warp and filling yarns.
The warp lies along the
length of fabric whereas
the filling lies across the
width.

3. Steps of making woven fabric:
shedding
Picking
Beat-up
Take-up
Let-off

4. Shedding:
The operation of forming
the shed in weaving.
Separation of warp yarn
into two or more parts is
known as shedding. It
make weft yarn passing
line. Harnesses are help
to shedding.

5. Picking:
Picking is the
action of filling insertion.
Shuttle transfer weft yarn
from one side to another.
Picking elements:
Picking-stick,Picker,Shuttl,
Buffer,Binder

6. Beat-up:
The process of forcing a
filling yarn into position in
a fabric. Reed is use to
separate yarns on a loom
and to beat-up the filling
during weaving.
Beat-up elements:
Reed

7. Take-up:
The woven fabric this
wound to a roller. This
roller is placed below the
frontrest.
Take-up elements:
Cloth roll.

8. Let-Off:
During weaving yarns
unwinding from warp
beam is known as let-off.
Let-off elements:
Warp beam, Drop wire

9. Md.Reazul Islam
B.Sc in Textile Engineering
Daffodil International University
Dhaka, Bangladesh.
Email: reaz.suzon@gmail.com