Conditionally accredited by IADC, this intensive four-day course is designed to provide participants with a thorough
knowledge of well integrity management and risk assessment in producing assets.
Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the
oil and gas industry.
This is an academic lecture for Diploma in Engineering 7th Semester Mining and Mine Survey Technology. The Course related to this presentation is Well completion and testing
This is an academic lecture for Diploma in Engineering 7th Semester Mining and Mine Survey Technology. The Course related to this presentation is Well completion and testing
This presentation is a course a bout wellheads which includes the basic components of the well head and the advanced techniques.
helping students who are cared about petroleum industry to increase their knowledge about this tool that is important for both drilling and production.
For Further information, use the following LinkedIn account:
https://www.linkedin.com/in/mohamed-abdelshafy-abozeima-9b7589119/
Overview of main components of subsea production / injection systems, including:
Wellhead
Subsea tree (Vertical, Horizontal, or Drill-thru)
Structural foundation / Template / Manifold /Jumpers
Subsea processing equipment
Chemical injection system
Umbilical with electrical power and signal cables
Risers
Production Control and Monitoring System
Will the well be safe over its entire life? What is necessary to guarantee this?
Interactive technical public course in Amsterdam, The Netherlands 5-7 October 2016
This discussion paper on Energy Well Integrity focuses on typical onshore unconventional oil or gas wells, which are generally similar to wells used for conventional oil or coal bed methane production. The major topics covered in this paper are well design, construction, use and abandonment. Issues of cementing practices and gas migration pathways are given special emphasis because they are key aspects in establishing and understanding well integrity.
This presentation is a course a bout wellheads which includes the basic components of the well head and the advanced techniques.
helping students who are cared about petroleum industry to increase their knowledge about this tool that is important for both drilling and production.
For Further information, use the following LinkedIn account:
https://www.linkedin.com/in/mohamed-abdelshafy-abozeima-9b7589119/
Overview of main components of subsea production / injection systems, including:
Wellhead
Subsea tree (Vertical, Horizontal, or Drill-thru)
Structural foundation / Template / Manifold /Jumpers
Subsea processing equipment
Chemical injection system
Umbilical with electrical power and signal cables
Risers
Production Control and Monitoring System
Will the well be safe over its entire life? What is necessary to guarantee this?
Interactive technical public course in Amsterdam, The Netherlands 5-7 October 2016
This discussion paper on Energy Well Integrity focuses on typical onshore unconventional oil or gas wells, which are generally similar to wells used for conventional oil or coal bed methane production. The major topics covered in this paper are well design, construction, use and abandonment. Issues of cementing practices and gas migration pathways are given special emphasis because they are key aspects in establishing and understanding well integrity.
More HPHT related content is available in our download centre page: http://tinyurl.com/33xlqww
More information about the HPHT Wells Summit 2010 can be found here: http://tinyurl.com/3ycuzg5
Participants will acquire an understanding of the geological challenges that accompany drilling and how to combat them to
succeed. The course will look at what information is gathered during drilling from wellsite geology, mud logging and
petrophysical (“wireline”) logs, and how it is used. The measurement and prediction of formation pressure are covered in detail, and there are also modules on coring and well testing. The course concludes with an in-depth look at the deep water drilling environment, including recent case histories. Attendees are expected to have an understanding of how petroleum is formed, how it migrates and how it is trapped, and of the principles of rotary drilling and the mud circulation system.
Paper based exercises will be carried out during each module.
Blending is important both as part of the planning process, to decide how refinery process units should be operated, and also in order to determine how blendstocks should be combined to ensure that they are all economically utilised and product specifications are met safely, efficiently and economically.This 2 day Blending course provides an overview of the necessary elements of the blending process for the key refinery products and an insight into how the optimum blends should be calculated. Future changes in product specifications will be discussed along with the implications to the refiner.
This course provides comprehensive strategies, tactics, examples and tips for everybody involved in marketing and selling lubricants. It gives managers, planners, marketers, salespeople, product developers and support staff the skills required to achieve significant competitive advantages and improved profits. It will also help operational and technical staff understands why their roles are so important. All the trends and future key issues for marketing and selling lubricants will be presented and discussed, on both a global and regional basis.
Topside processing systems features several different equipment that carry out distinct functions. These equipment are packaged into the modules which make up the whole topsides processing plants. It is the key that the equipment work safely and efficiently for which it was designed for and under a range of conditions including start-up and bad weather at the field location.
WELL INTERVENTION AND PRODUCTIVITY SCHOOLpetroEDGE
The Well Intervention & Productivity School (WIPS) is designed to help well intervention specialists, well service supervisors, and petroleum engineers become more aware of the problems that can arise in the planning and execution of well interventions.
This course is designed to make those that attend aware of how their job can directly impact the productivity. Early identification of problems in wells and effective interventions to fix problems can have a significant impact by minimising lost oil through formation damage and non productive time. As well as discussing best practice, time will be made available for discussion relating to specific problems that may be affecting fields operated by members of the class.
This 3 day training course is designed to give you an operational perspective of LNG Terminals and an appreciation of how the business of LNG and relevant technologies inter-relate and work together. Throughout the course, you will have the opportunity to engage in highly interactive discussions and acquire critical operational processes and techniques.
ABOUT THE COURSE
The 3 day session on Stuck Pipe Prevention focuses upon the key mechanisms with which pipe becomes stuck and how the sticking mechanisms can be prevented through proper planning and operational procedures. It also covers the Driller’s First Actions, i.e. what the Driller should do as soon as he has become stuck in order to maximise the possibility of becoming free.
To maximise learning, delegates work through actual Stuck Pipe case histories, identifying the sticking mechanisms, prevention measures and what to do to get free. Presentation material is through the use of PowerPoint, case histories and video.
Typically, Fishing is the last chance for the Operator to recover the stuck BHA / fish from the hole. In many cases work pressure is considerable, since fishing is a high cost operation and because Governments often demand that nuclear sources for example are recovered. Thus, it is vital that Fishing is a success. And yet there is an estimated 85% failure rate.
The 2 day session on Fishing focuses upon how it can be a success first time. To maximise learning, delegates work through actual fishing case histories and follow proven procedures and methodologies. Presentation material is through the use of PowerPoint, case histories and videos
By the end of this course, delegates will be able to:
Understand how drill pipe become stuck & what they can do to prevent the situation from occurring.
What the driller should do regarding his “First Actions” upon becoming stuck.
Fully understand the contents of the Driller’s Stuck Pipe Prevention Handbook.
How to fish successfully the first time – i.e. what information, tools, techniques, practices and procedures are required.
Fully understand the contents of the Driller’s Fishing Handbook
This 5 day training course provides participants with knowledge of critical well completion processes, completion equipment and operations associated with deepwater completions and available intelligent well and completion architecture used for both platform and subsea completions.
PetroSync - Water Injection for Production SystemPetroSync
This course is designed to ensure effective understanding of thewater injection system as a reservoir primary recovery methodology in oil fields to maintain the reservoir pressure with special attention to the system components from the supply source to injection point in the reservoir, which permit the operator’s best insurance to achieve well safe and effective operations. The course is composed as modules,whichincludeexercises, group discussions and quizzes forfull comprehension of the course topics relevant to all functions of the water injection system and its operations.
This intensive five-day course is designed to provide participants with a thorough knowledge of downhole sand exclusion equipment and the operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various types of sand control equipment, specific applications, the preparation and the final execution and installation of the equipment.
Understand how effective audits bring Maintenance Management theories into real world
practice on a daily basis in your plant, with your Leaders, Planners, and Craftsmen.
Learn how to determine the root-cause of Maintenance Business Process problems, and
how to shed light on facts that support a need for change.
A key component of production cost is maintenance and the key role of maintenance is to guarantee the reliability of the production. The crucial element for ensuring that maintenance is cost effectively delivered is the planning and scheduling of maintenance tasks.
Given the huge impact maintenance management can have on production output, as well as the increasing tendency for maintenance departments to be asked to do “more with less”, it is essential that maintenance professionals strive toward the implementation of best practices in maintenance planning.
Ron Moore, author of Making Common Sense Common Practice, quotes benchmarking studies that show that reactive maintenance correlates strongly with poor plant or facility performance. Yet many companies are still operating in this fire-fighting mode.
A proactive approach means that we regain control of the work we do and it’s timing. This leads to improved safety and availability. This course provides a methodology for: pre-planning routine maintenance tasks generated by predictive and preventive maintenance programs, planning tasks to recover from malfunction or breakdown and a strategy to allow us to cope with random failure. The course will cover the essential steps we need to take to plan and schedule our maintenance work properly. That will help maximize the proactive content and further our goal of achieving best-in-class performance.
About the course
A key component of production cost is maintenance and the key role of maintenance is to guarantee the reliability of the
production. The crucial element for ensuring that maintenance is cost effectively delivered is the planning and scheduling of
maintenance tasks.
Given the huge impact maintenance management can have on production output, as well as the increasing tendency for
maintenance departments to be asked to do “more with less”, it is essential that maintenance professionals strive toward the
implementation of best practices in maintenance planning.
Ron Moore, author of Making Common Sense Common Practice, quotes benchmarking studies that show that reactive
maintenance correlates strongly with poor plant or facility performance. Yet many companies are still operating in this firefighting mode.
A proactive approach means that we regain control of the work we do and it’s timing. This leads to improved safety and
availability. This course provides a methodology for: pre-planning routine maintenance tasks generated by predictive and preventive maintenance programs, planning tasks to recover from malfunction or breakdown and a strategy to allow us to cope with random failure. The course will cover the essential steps we need to take to plan and schedule our maintenance work properly. That will help maximize the proactive content and further our goal of achieving best-in-class performance
In summary, this 3-day intensive training course will help maintenance professionals to:
Develop the ability to produce logical and comprehensive maintenance plans using a systematic and structured approach.
Produce work schedules that optimize Plant Availability.
Enable high productivity and effectiveness of the workforce by proper work preparation.
Plan the ‘unexpected’; managing trips, breakdowns and other unwanted incidents, smoothly and efficiently.
Who Should Attend
Maintenance Managers, Engineers, Planners, Schedulers, Supervisors and Senior Technicians.
Individual Attention and Post Training Support
• Delegates will get individual attention, working in teams of four.
• Additional skilled and experienced trainers will be brought to help, if the numbers are larger, so as to maintain the teams
to trainer ratio at about 4:1.
• Participants will have email access to the trainer 3 months post training for any questions on implementation issues.
The course focuses on the practical applications of various techniques and methodologies in well completion --- from the selection of completion type, perforating strategies, fluid selection, and installation of production heads.
PD220 Advanced Turnaround, Shutdown and Outage ManagementpetroEDGE
A 3 day training course derived from the Turnaround Model of Excellence developed by practitioners that guarantee the reliability of your operations. The course six modules develop and expand the basic ideas of the Model of excellence and introduce some new concepts to further enhance performance. The aim of the course is to expand the knowledge and give new insights on Turnaround Management to practitioners who already have a basic knowledge of Turnarounds.
PetroSync - API 580 & API 581 Risk Based Inspection & Base Resource DocumentPetroSync
The course is based on API RP 580 Risk-Based Inspection and API Publication 581, Base Resource Document. The course first explains feasible means and alternatives for achieving a successful RBI program without undue complications. This course deals with RBI framework and methodology in a simple straight forward manner to establish and implement a risk-based inspection program best suited for the company objectives.
This course examines different deepwater depositional systems and considers how deepwater process, topography and sediment supply impact on these systems. The course examines analogue data from turbidite reservoirs and modern turbidite systems. Depositional settings and sequences associated with clastic deepwater systems are reviewed, along with the geological controls on reservoir quality and architecture. It also examines post-depositional process that can have a major impact on reservoir quality and architecture, and considers this within the context of the petroleum system.
API 570 Piping and Pipeline Inspectors Preparatory CoursepetroEDGE
This program is designed for in depth understanding of Inspection of piping and pipelines under operation and in-service as per API 570. This preparatory course will prepare inspectors to ensure piping and pipeline integrity in service. Practical aspect of design considerations, sizing, rating, piping and pipeline integrity, internal inspections, analysis, repair, pressure testing, and pipeline protection shall be discussed. The program shall also provide more information about types of piping system defects which may crop in during operation, repairs, maintenance and alteration. This will lead the participants to prepare them for ensuring good quality and safety of operating piping and pipelines so that they are safe in operations and ensure preventing any incident.
The oil & gas industry has had a volatile ride for the last decade. Oil prices have been fluctuating between $30 and $130/bbl and with Shale oil appearing as a serious competitor and LNG positioning itself more as the transitionary fuel of the future. Of course we never knew what we do not know but it seems to be getting more unclear what the future holds, especially for the oil & gas industry. Uncertainty seems to rule, and turbulence of our business environment seems to be reaching a new tipping point year after year, and the end of common strategic planning is in sight.
Distributed Control System (DCS) Applications, Selection & TroubleshootingpetroEDGE
Since the first Distributed Control System was installed in the late 1970’s, the concept of DCS has swept alternative control technologies from the field. The substantial growth, in the construction of plants in the traditional heavy process industries, such as power generation, refining, oil and gas, water and petrochemicals, is driving significant growth in the utilization of DCS. The broad architecture of a solution involves either a direct connection to physical equipment, such as switches, pumps and valves or connection via a fieldbus communication system.
This course will familiarize engineers, designers and construction personnel with the layout and design procedures and practices involved in the choice of piping systems and their associated supporting equipment. It will also address in detail, common pipeline components such as pumps, compressors and heat exchangers and will cover their mechanical performance and limitations in different piping arrangements. This course will give participants the background required to complete and successfully apply typical equipment layout and piping arrangements.
Advanced Heat Exchanger Design, Inspection and TroubleshootingpetroEDGE
The design, performance and operation of modern heat exchangers requires an understanding of the principles of heat transfer and fluid flow, coupled with access to numerically based techniques and supporting data. This course will review heat transfer fundamentals as applied to tubular and plate devices.
Liquid & Gas Flowmetering & Custody MeasurementpetroEDGE
This course will familiarize process, instrumentation and custody transfer engineers with the procedures and practices involved in the choice of flowmetering systems and their associated supporting equipment. It will address these points in relation to both single- and multi-phase flows and will give guidance on the optimum commercially available flowmeters through a detailed comparison of their relative merits. Flowmeter calibration is crucial to these topics.
The course also covers the related issues of level and tank measurement as well as lease automatic custody transfer and truck custody transfer, leak detection, loss control and monitor and control production losses.
Webinar: Scenario planning for long term decision makingpetroEDGE
When developing a strategy or making investment decisions, there will be many uncertainties that need assessment. These can range from cost and timing issues to broader questions at the macro level, for example political, regulatory or social developments.
A way to get to grips with the latter category is by using ‘scenario analysis’, sometimes called ‘scenario thinking’ or ‘scenario planning’. A scenario in this context is an alternative future: a coherent narrative of a set of developments, trends and events that could unfold within some defined business environment.
A decision to drill an exploration well with the objective to find a new oil or gas field must be based on a sound assessment of the prospect’s risks and of the volumes: what is the chance that a well will find hydrocarbons, and how much could it be? Risk and volume assessments form the basis for decisions to drill a well or not, and as such it is the link between subsurface evaluation and the business aspects of the petroleum industry. This course explains how risks and volumes can be assessed in a realistic and pragmatic manner, based on a sound understanding of the geological details of the prospect as well as of its regional geological setting and our play understanding.
This intensive 2 x 2 week program has been put together to cover Advanced Well Engineering topics. The program intends to uplift the knowledge and skills for engineers, who are or will be directly involved in well and completion design. It will also benefit staff that are or will be working as a member of a day-to-day operations team.
The courses present advanced concepts of drilling and completion operations, plus post-completion enhancement (workovers). Participants will learn to visualize and troubleshoot what is happening downhole, discover what can be accomplished and optimized, and learn how drilling and completions can alter reservoir performance.
The Rig Safety Awareness course features ten e-learning modules, designed for new technical and petroleum engineers going offshore for the first time. The modules will require between 30 to 40 minutes study each.
Each module will also include assessment questions that relate to module’s content. Each e-learning module will be supported by four 2D ‘Walkthrough Events’ where the user is stepped through a series of safety failures that leed to an incident occurrence.
The main objective of this course is to acquire practical skills and tools on how to set up an asset depletion plan through a focused well and reservoir management approach. It is common in many asset teams to have an unclear picture of what future actions should be taken to the different wells and reservoirs as they deplete. In many cases, these actions are reactive rather than proactive. This is mainly due to a lack of a well-defined reservoir management and depletion plan or strategy.
This course presents you with the knowledge and tools to design a depletion plan. Such plan would be consistent with the increased understanding of the reservoir behavior obtained from focused reservoir management. The depletion plan is a comprehensive set of actions that the asset team designs to identify a way forward for every well by identifying future workovers, remedial work, gas lift methods, all the way to well abandonment. And for every reservoir by identifying underdeveloped areas, infill drilling targets, secondary recovery or IOR/EOR applications.
Major changes in 2020 for the global refining industrypetroEDGE
Refiners generally have incentives to upgrade their
refineries, by adding conversion units to produce greater
amounts of clean products (e.g., gasoline, diesel) and
lesser amounts of fuel oil. All else being equal, refiners
with conversion achieve higher margins than simple
refineries without conversion. However, it usually takes at
least four to five years from initial planning to actual startup
of a conversion project.
In our pursuit to discover oil and gas in ever deeper horizons, wells are often drilled in what is known as a High Pressure High Temperature [HPHT] environment. To be considered a HPHT well, the downhole conditions will have pressures in excess of 10,000 psi [69 MPa] and 300 deg F [150 deg C]. To drill these usually expensive wells successfully, the planning and execution phase has to be of an exceptionally high standard. Therefore, both operator and drilling/service contractor staff must be seamlessly aligned and work as a coherent team to reach and then harness the well objectives.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
1. www.petroEDGEasia.net
WELL INTEGRITY MANAGEMENT
Your Expert Course Faculty
Gordon Duncan
Practising completions & well services professional with over 37 years of oilfield experience
from careers in Petro-Canada, Santos, Shell EP International, Petroleum Development Oman
(PDO) and BP. Currently serving as Technical Director in PetroEdge.
What past learners have to say:
“A good course which gave a 360 degrees view on Well Integrity Management, taught by a well experienced trainer. This is definitely a
MUST-ATTEND course for Well and PT Communities” Production Technologies, PETRONAS Carigali Iraq Holdings
“The course is a must for anybody serious about promoting well integrity leadership.” Well Integrity Engineer, SPD LLC
“Well Integrity Management presented in a highly effective manner including covering of day-to-day real situation. The experience sharing
between trainer and participants are excellent” Well Integrity Engineer, Talisman Malaysia
“Full of knowledge. Expert Course.” IT Well Data Controller, Occidental Oil and Gas International
“Excellent course for “Well Integrity Management” and excellent teaching skills.” Well Operation’s Technical Advisor, Occidental Oil and
Gas International
Conditionally Accredited By:
2. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
About this course
This intensive four-day course is designed to provide participants with a
thorough knowledge of well integrity management and risk assessment in
producing assets. Based on the regulatory requirements and using real
examples and exercises from around the world, this represents best practice
integrity management within the oil and gas industry.
When to take action with a well is a critical decision, both from a safety and
economic perspective. A consistent approach to decision-making provides
certainty within the organisation, focusing effort, and spending wisely. The
decision-making steps will be set out to ensure all critical aspects are
captured consistently. Risk analysis approaches used by different
organisations and examples of risk management and risk-ranking methods
will be discussed.
Course Objectives
To enable participants to understand the well integrity management
principles and risk management processes that have to be applied for
assurance of well integrity within a hydrocarbon production environment.
Who should attend?
Invaluable for production, operations, and integrity professionals involved in
implementing & managing well integrity and seeking to improve
performance. It is also essential for those who need to develop and
implement such systems, or who have a general need to know and
understand more about well integrity management. The course will also
provide a fresh approach for senior professionals and managers.
Designed for professionals in the oil and gas industry who are involved in the
design, construction and operation of wells from the following disciplines:
Production Maintenance
Production Operations
Drilling Engineering
Safety engineering
Well Intervention
Well Integrity Engineering
Asset Management
Benefits of Attending
Define the building blocks of a
successful well integrity
management programme,
annulus pressure
management, the equipment
items, their performance
standards, field data
collection requirements, and
methodology for data analysis
Demonstrate the benefits of
risk analysis, and share
methods applied across the
industry
Develop an approach to risk
management
Understand the New ISO
Standard
How do we “Make Wells
Safer”. Learn about emerging
technologies for well integrity
problem diagnosis and new
techniques tried for well
repair
Define the basic elements of
well integrity management
training for field operators
Focus on well design elements
that enhance or hinder well
integrity status definition
during the operating phase of
the well life-cycle
Illustrate the demonstrable
benefits of well integrity
management from field
experience
3. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
Course Outline for 4 Days
DAY 1
WELL INTEGRITY MANAGEMENT FUNDAMENTALS
Introduction and Definitions
Examples of Well Integrity Failures and their
Consequences
Well Integrity Management System Overview
Management and Continual Improvement
Regulations, Policies and Standards
Safety Critical Elements, Barriers and Performance
Standards
Roles and Responsibilities
Measurement, Review and Improvement
RISK ASSESSMENT AND CONTROL
Quantitative and Qualitative Risk Assessment
Frequency and Consequence Assessment
Risk Matrix
Failure Mode Effect and Criticality Analysis (FMECA)
Fault Tree Analysis and Leak Path Diagrams
Exercises Based on Actual Cases
DAY 2
WELL INTEGRITY AND PRODUCTION RISK MANAGEMENT
Maintenance and Inspection
Valve Standards, testing and leak rate determination
Maintenance and Inspection
Annulus Pressure Management
- Understanding MAASP
- MAASP Calculation
- Monitoring and Testing
Well Operating Envelope
Operating Procedure and Monitoring
WELL INTEGRITY AND FLOW ASSURANCE RISKS
Scale and Hydrate Management Overview
Corrosion Management Overview
Sand and Erosion Management Overview
OVERVIEW OF NEW ISO STANDARD FOR WELL INTEGRITY
EXERCISE BASED ON ACTUAL CASE STUDIES
DAY 3
OPERATIONAL WELL INTEGRITY ISSUES & RISKS
Interventions and Workovers
Maintaining Well Functionality
Restoring Well Functionality
Legislation, Roles & Responsibilities
RECOVERY, SUSPENSION OR ABANDONMENT
Methods
Contingencies
Criteria
THE IMPORTANCE OF JIP'S AND THE MANAGEMENT OF
INFORMATION COMPETENCY OF WELL INTEGRITY
PROFESSIONALS
EXERCISES/DISCUSSIONS ON ACTUAL CASES
DAY 4
Day 4 will take all that we have discussed in the first 3 days
and provide you with an overview on how to take the
understanding of Well Integrity Management to the next
level.
“MAKING WELLS SAFER”
People
Equipment
Standards
“Company Wide Implementation”
4. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
Other courses conducted by
Gordon Duncan, exclusively
with petroEDGE®
Completions: Applications,
Types, Installation and
Workovers
Rigless Interventions:
Slickline, Coiled Tubing,
Hydraulic Workover and
New Technologies
And many more Oil & Gas
training courses! Visit us and
download our full Year 2014
training calendar at
www.petroedge.net. Call us
for more information at +65
6741 9927 or email your
query to info@asiaedge.net.
Your Expert Trainer: Gordon Duncan
Gordon has over 37 years of oilfield experience specializing in
Technical and Commercial Operations in Drilling, Completions
& Well Services professional with both IOC’s & various service
companies, just to name a few, include Shell EP International,
Santos, Petro-Canada, Petroleum Development Oman (PDO)
and BP.
Todate, he has taken on several training instructor assignments around the world
including Malaysia, Spain, Thailand, Brazil, the UAE, Iraq, Iran & Indonesia as well
as Australia. He currently delivers training on Completions Fundamentals for BP
Well Site Leaders of the Future and the Chevron “Horizon Programme to Trainee
Drill Site Managers”. This programme has spanned over 18 courses delivered in
Houston, Baku, Duri, Bangkok, Aberdeen & Perth.
Selection of training courses directly involved are: -
Completion: Equipment, Applications, Types and Applications
Rigless Interventions, Slickline, Wireline, Hydraulic Workovers and Associated
New Technologies
Well Integrity Management which is Accredited by IADC
Advanced Well Integrity Management
Deepwater Completions
Completions and Well Interventions related to Drilling, Completions and
Workover Operations
Introduction to Exploration & Production
Wellsite Leadership
During his career, he has also been actively involved in the preparation of
Management Systems, Operating Procedures, Operations Manuals, peer reviews of
legislation for ISO & BSEE. All of these documents require both a technical knowledge and
the ability to transfer this knowledge into the written word.
Examples of work include:-
Schlumberger – Slickline & Wireline Operations Manual
OPITO - Preparation & Implementation of Competence Management System for
– Level II Mechanical Wireline & Level III Well Services Supervision.
BP – Part of working group tasked with consolidating Forties Field Well
Operations Procedures.
MB Petroleum – Preparation, Role Out & implementation of Operations
Management System for Drilling, Workover & Well Services.
Shell International – Part of Working Group responsible for the update of the
Well Control Manual and the Global Well Testing Manual.
Talisman Malaysia – Responsible for the revision of Wells Management System,
including the Well Integrity Management System.
ISO – Part of the working group tasked with the creation and roll out of ISO
16530 – Well Integrity Management in the Operational Phase.
BSEE - regular feedback on draft CFR’s (Code of Federal Regulations) such as
CFR 250.420 Casing & Cementing Requirements, CFR 250.430 Diverter Systems,
CFR 250.455 Drilling Fluid Requirements, CFR 250.737 BOP Testing
Requirements, Subpart E Oil & Gas Well-Completion Operations.
5. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
petroEDGE® delivers energy industry skills-based training courses in major cities around Asia, catering for every
stage of your organisation’s development path. Since our inception, we have provided wide range of
management development training, business strategy and technical skills training courses to over 100 leading
international corporations and government establishments. Our growing client profile:
Almansoori Wireline Services (Thailand) Maersk Drilling PT Perusahaan Gas Negara
Arabian Bridge Company for Oil Services Maersk Oil Qatar PT PLN (Persero) Kantor Pusat
Asetanian Marine Pte Malakoff Corporation Berhad PTT Exploration & Production
Bangladesh Oil, Gas & Mineral Corp Malaysia LNG PTTEP International Limited
Bergen Group ASA Malaysia Marine & Heavy Engineering PTTEP Iran Company Limited
BG Exploration and Production India Malaysia-Thailand Joint Authority PTTEP Oman Company
BJ Services Company Middle East Media Chinese International PVD Offshore Services Co.
BP Exploration & Operating Vietnam Mid-Continent Equipment Group Pte Ranhill Engineers & Constructors
BP Exploration Operating Company MISC Berhad Rhodia Asia Pacific Pte
BP Indonesia / Singapore & Vietnam Mitsui Oil Exploration Co. Repsol
Brunei LNG MMS (Insurance Brokers) Royal Norwegian Embassy
Brunei Petroleum Murphy Oil Corporation Sabah Shell Petroleum Co
Brunei Shell Petroleum Co National Healthcare Group Sapura Energy
Cairn Energy India Pty Nations Petroleum (SE Asia) Sapuracrest Petroleum Berhad
Carigali Hess Operating Co. Newfield Peninsula Malaysia Inc. Sarawak Shell Berhad
Carigali PTTEPI Operating Company Nipon Oil Exploration (Malaysia) Saudi Arabian Oil Company
CGG Veritas (M) Oceaneering International Saudi Basic Industries Corp
Charnavon Petroleum Offshore Geo-Surveys Schlumberger Oilffield (S) Pte
Chevron Asia South Optimal Chemicals (M) Scomi Oiltools
Chevron Thailand E & P Optimal Olefins (M) Shell Eastern Petroleum
CNOOC PC Vietnam Shell MDS (Malaysia)
Cuulong Joint Operating Company PCPP Operating Company Shell Saudi
Det Norske Veritas (DNV) As Pearl Energy (Nam Conson) Sime Darby Plantation Sdn Bhd
Det Norske Veritas Pte PERMATA Singapore Petroleum Co.
Dof Subsea Australia Pty Permata - PMTSB SN Aboitiz Power
DPS Bristol (M) Pertamina Learning Center S-Oil Corporation
Esso Malaysia Berhad PetroEnergy Resources Corp. Talisman Malaysia
ExxonMobil E & P Malaysia Inc. Petrofac Malaysia Limited Tately N.V.
First Gas Power Corporation Petroleum Insitute of Thailand Technip Geoproduction (M)
Genting Oil & Gas Petroleum Well Logging Co. Teknik Janakuasa
Geomechanics International Petrolux Temasek Holdings Pte
Greatwall Drilling Company PETRONAS Holdings Tenaga Nasional Berhad
Halliburton Energy Services, Inc. PETRONAS Carigali Thang Long JOC
Hercules Tanjung Asia PETRONAS Carigali Vietnam Limited TL Offshore
Hess (Thailand) Limited Petronas Dagangan Berhad Total (China) Investment Co. .
Hoang Long Hoan Vu JOC PETRONAS Gas TOTAL E&P Indonesia
Intisari Oildfield Service PETRONAS Methanol (Labuan) Trans Thai Malaysia
Intra Oil & Services Bhd PETRONAS Penapisan (Melaka) Transwater API
Japan Vietnam Petroleum Compan Petrousaha Engineering Services Tri-M Technologies (S)
Kavin Engineering & Svcs Pte Petrovietnam Drilling & Well Services Truong Son JOC
Kebabangan Petroleum Operating Co. Powertium Marine UMW Standard Drilling
KUFPEC Regional Ventures (Indonesia) Premier Oil Indonesia University New South Wales
Lam Son JOC PT Halliburton Indonesia Vastalux
Lion Rig Builder Pte PT Medco E&P Indonesia Vinyl Chloride (Malaysia)
Lundin Malaysia B.V. PT Pertamina (Persero) Head Office YTL Power International Berhad
6. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
IN-HOUSE TRAINING SOLUTIONS
petroEDGE® focuses on skills development in 3 main areas – Engineering, Management and Strategy for
Upstream Exploration and Production Business.
Our In-House Training Solutions Team offer a full spectrum of short courses, curricular competency based
solutions that can be customised to your long term and short term business needs.
Types of In-House Programmes offered:
FUNDAMENTAL PROGRAMMES
Introduction to Exploration & Production Drilling Essentials LNG Fundamentals
Introduction to FPSO CBM & Shale Gas Technical Fundamentals
TECHNICAL PROGRAMMES
Operations Geology (Level 2) Basin Analysis (Level 2) HPHT Well Engineering
Deepwater Well Engineering Deepwater Well Operations Well Intervention
Well Integrity Management (Drilling & Production) HAZOP Assessment & Leadership
HPHT Completions Techniques Well Operations and Maintenance Stuck Pipe Prevention & Fishing
Train-the-Trainer: Gas Processing Level 1 Train-the-Trainer: Gas Processing Level 2
MANAGEMENT & SOFTSKILLS PROGRAMMES
Technical Report Writing & Presentation Skills Writing Standard Operating Procedures
EPCIC Contract Management Techniques Advanced Budgeting & Forecasting in Oil & Gas
E & P Accounting Finance for Non-Finance Leadership & Team Dynamics
“TRAIN-THE-TRAINER” PROGRAMME
The "Train-the-Trainer" program has proven to be one of the most cost effective methods for embedding
the process of delivering and facilitating crucial training programmes within your organisation in terms for
sustainable skills and knowledge development.
“Train the Trainer” programme and its specific deliverables provide in-depth concept knowledge, instructor
training, and facilitation skills. This experience prepares select employees to become internal Program
Leaders, licensed to teach internally. The internal trainer can play a critical role in developing and
implementing programs that align the organization for success.
This programme will be a carefully designed approach for sustainable and effective organisational
improvement. The role-out will reflect the immediate on and on-going challenges faced within your
organisation.
CURRICULUM DEVELOPMENT PROGRAMME SERVICES
With the constant changing of business environment and volatile economy, every company, big or small,
needs to stay abreast of the rapidly evolving developments and acquire new competencies in order to stay
competitive. Our key pool of trainers, industry experts and consultants are available to develop a
Curriculum Development training programme to help you attain relevant competencies in the area that is
most needed.
To learn more, call us at +65 6741 9927 or email info@asiaedge.net
7. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
petroEDGE®
boasts an unrivalled teaching faculty. All of our partners and consultants have extensive management and technology
experience coupled with a track record in delivering high quality courses to professionals in leading oil majors globally.
In addition to individual consultants and trainers, petroEDGE® also works closely with 2 major training partners, namely: -
PETRONAS LEADERSHIP CENTRE
PETRONAS Leadership Centre (PLC), started as an internal training department in 1979. Over the years, we have
established ourselves as a top corporate learning hub for industry leaders, serving the Oil & Gas sector in Malaysia and
beyond. Backed by over 30 years of experience and our deep passion for excellence, PLC has robust tools and Learning
and Development know-how to help leaders transform and enhance their leadership skills. This is supported by the
resources of PETRONAS and its firm belief in the importance of human capital development. For further information
on PLC, visit www.petronasleadershipcentre.com.my.
ROBERTSON CCG
The Robertson Training Centre was established in 1990 to provide a comprehensive range of upstream
training programmes for the international petroleum industry. With a portfolio of over 70 courses,
training has been given to personnel from over 120 companies and delivered in more than 45 countries.
The Centre has now gained a reputation for the quality of its product. Robertson is unique in the oil and
gas training field in that by using our in-house experts, we can design and present training programmes of any length in virtually any
global location. In addition to five day short courses, the Centre’s most effective training programmes, delivering real skills transfer,
are in-company workshops using client data. Given over 6-12 weeks, these workshops teach technical skills in exploration, development
and production, project planning and management, teamwork and presentation skills. Long term training on a one-to-one basis is also
offered for periods of up to 6 months.
petroEDGE® are members of the esteemed Energy Institute and the CPD Certification Service. We also proud to be have been
inducted as an approved training provider of Institute of Leadership & Management for 4 of our training programmes. This highlights
the confidence given to the quality of our trainings courses.
The CPD Certification Service helps organisation provide certified CPD and acts as a point of contact for those seeking to
obtain certified CPD material. It supports further learning initiatives being undertaken by Government, professional
institutions, trade associations, individual organisations, training providers, suppliers and so on.
For more information, visit www.cpduk.co.uk.
The Energy Institute (EI) is the professional body for the energy industry, delivery good practice and
professionalism across the depth and breadth of the sector. The purpose of the EI is to develop and
disseminate knowledge, skills and good practice towards a safer, more secure and sustainable energy
system.
In fulfilling this purpose the EI addresses the depth and breadth of energy and the energy system, from upstream and downstream
hydrocarbons and other primary fuels and renewables, to power generation, transmission and distribution to sustainable development,
demand side management and energy efficiency. A Royal Charter membership organisation, the Energy Institute provides a wealth of
expertise in energy matters, serving as a home for energy professionals and a scientific and technical reservoir for industry. It is licensed
by the Engineering Council to offer Chartered, Incorporated and Engineering Technician status to engineers and also by the Science
Council and Society for the Environment to offer registration as Chartered Scientist and Chartered Environmentalist.
The EI is an international organisation serving its members in around 80 countries. For more information, visit www.energyinst.org.
The Institute of Leadership and Management (ILM) is Europe’s foremost leadership and management body. At ILM,
we are passionate about the power of leadership and management to transform people and businesses. We believe
that good leadership and management creates effective organisations, which builds social and economic prosperity.
ILM work with organisations in all sectors to help them define, develop and embed the leadership and management
capability they need to succeed. ILM provides qualifications in leadership and management, coaching and
mentoring and specialist areas such as social enterprise. For more information, please visit https://www.i-l-m.com.
Our programmes approved by ILM are: International Oil & Gas Executive Development Program 2013, Human
Competency & Capability Development, Leadership Team Dynamics in Oil & Gas and Technical Report Writing & Presentation Skill
for Oil & Gas Professionals.
Visit us at www.petroedgeasia.net or contact us directly at +65 6741 9927 or email to info@asiaedge.net for more information.
8. Conduct this training course in-house for more effective savings!
Call us at +65 6741 9927 or email to info@asiaedge.net. For more information, visit us at www.petroedgeasia.net
WELL INTEGRITY MANAGEMENT
DELEGATE DETAILS
Delegate 1 Please note
- Indicate if you have already registered by Phone
+Fax +Email +Web
- If you have not received an acknowledgement
before the training course, please call us to confirm
your booking.
- Photocopy this form to register multiple delegates.
PAYMENT METHODS
By Cheque/ Bank Draft
Make Payable to Asia Edge Pte. Ltd.
By Direct Transfer
Please quote your invoice number with the remittance
advise
Account Name: Asia Edge Pte. Ltd.
Bank Number: 508 Account Number: 762903-001 Swift
Code: OCBCSGSG
All bank charges to be borne by payer. Please ensure
that Asia Edge Pte Ltd receives the full invoiced
amount.
PAYMENT POLICY
Payment is due in full at the time of registration. Full
payment is mandatory for event attendance. By
submitting this registration form, you have agreed to
Asia Edge Pte Ltd’s payment terms
CANCELLATIONS & SUBSTITUTIONS
You may substitute delegates at any time. For
cancellations received in writing more than seven (7)
days prior to the training course, delegates will receive
a 100% credit on the amount paid which can be used in
another Asia Edge Pte. Ltd. training course for up to
one year from the date of issuance. The credit is
transferable to other persons in the same company and
applicable against any future Asia Edge Pte. Ltd. public
course. For cancellations received seven (7) days or less
prior to an event (including day 7), no credit will be
issued. In addition, a cancellation fee equivalent to 15%
of the course fee will be charged. In the event that Asia
Edge Pte. Ltd. postpones or cancels a course, delegate
payments at the date of cancellation or postponement
will be credited to a future Asia Edge Pte. Ltd. course.
This credit will be available for up to one year from the
date of issuance, and it is transferable to other persons
in the same company and applicable against any future
Asia Edge Pte. Ltd. public course. Asia Edge Pte. Ltd.
does not provide refunds for cancellations and
postponements or waive fees for unpaid invoices upon
receipt of registration.
PROGRAM CHANGE POLICY
Please note that speakers and topics were confirmed at
the time of publishing; however, circumstances beyond
the control of the organizers may necessitate
substitutions, alterations or cancellations of the
speakers and/or topics. As such, ASIA EDGE PTE LTD
reserves the right to alter or modify the advertised
speakers and/or topics if necessary. Any substitutions
or alterations will be updated on our web page as soon
as possible.
This brochure may not be copied, photocopied,
reproduced, translated, or converted to any electronic
or machine-readable form in whole or in part without
prior written approval of ASIA EDGE PTE LTD
ASIA EDGE PTE. LTD.
Company Registration No: No. 200710561C
Copyright@ 2005 ASIA EDGE PTE LTD. All rights
reserved.
Mr Ms Mrs Dr Others:
Name :
Job Title :
Department :
Telephone
No.
:
Email :
Delegate 2
Mr Ms Mrs Dr Others:
Name :
Job Title :
Department :
Telephone
No.
:
Email :
Company :
Address :
Country : Postcode:
Attention
Invoice to
:
Telephone
No.
:
Fax No. :
4 EASY WAYS TO REGISTER
Online: www.petroedgeasia.net
Email: info@asiaedge.net
Phone: +65 6741 9927
Fax: +65 6747 8737
WELL INTERGRITY MANAGEMENT
R E G I S T R A T I O N F O R M