VISITOR SAFETY INDUCTION Form # HSEQ - VSI Rev 2 - S.docx
•Download as DOCX, PDF•
0 likes•558 views
YOUR SAFETY IS OUR UTMOST PRIORITY Take a minute from your precious time and go through this brochure thoroughly. If there is anything unclear, please ask our HSE staff member without any hesitation. All visitors are required to follow the lead of security at the site entrance for parking. Max. Speed limit of 20 km/h should be maintained. Site plants and pedestrian have a right of way over your vehicle. Sign the visitor’s register at the main reception area in the office building and obtain a visitor’s card which should be put on all the time. Visitors are permitted to enter the construction site areas only if they are escorted by our HSE staff member after project management approval. SAFETY INSTRUCTIONS Smoking is prohibited in offices, and construction site areas except in the designated areas outside. Mandatory PPEs (Safety helmet, visibility vest, & safety shoes) are Obligatory at construction site area. Use only designated safe pedestrian walk routes. Observe and firmly follow the Safety and Advisory signs. Follow escorted HSE staff’s safety instructions and cautions during site visit. EMERGENCY INSTRUCTIONS In case of emergency situation or emergency alarm, please remain calm and follow the instructions of the escorted HSE staff and proceeds to the Assembly/muster points using safest direct emergency routes and exits. Stay at assembly/muster point until the visitor’s roll is called and you are noted as being present. Your full cooperation is requested with our staff to ensure your safety during emergency situation as they are all trained to deal with site emergencies. Call First Aid room and HSE In charge if you spot any accident or injury. EMERGENCY NUMBERS: Police: …………………………………………………………………………………. Ambulance: …………………………………………………………………………. Civil Defense: ………………………………………………………………………. First aid Room: ……………………………………………………………………. Project Manager: ………………………………………………………………… HSE: …………………………………………………………………………………….. FIRST AID ROOM IS LOCATED AT ………………………………………………………………………………………… ASSEMBLY POINTS ARE LOCATED AT 1. …………………………………………………………………………………….. 2. …………………………………………………………………………………….. CAUTION! Beware of lifting activities and overhead suspended loads. Beware of electrocution hazards. Beware of pinch point hazards (nails, sharp edges etc.) DECLARATION: I have read and understood all above instructions:- Visitor’s Name: ……………………………………………………… Company: ……………………………………………………………… Signature: …………………………………………………………….. Date: …………………………………………………………………….. SAFETY IS EVERYBODY’S RESPONSIBILITY!
Report
Share
Report
Share
Recommended
A Part 1 Safety Induction
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
Work At Height
The document discusses the Work at Height Regulations in the UK. It notes that falls from height are a major cause of workplace fatalities and injuries. The regulations were introduced to improve safety by establishing a clear and consistent framework to manage risks associated with working at height. The regulations require hazards to be identified and risks to be properly assessed, controlled, and mitigated through measures such as proper planning, supervision, safe work equipment selection, inspection, and worker training.
Work at height safety
Fall hazard means a circumstance that exposes a worker in a workplace to a risk of a fall that is reasonably likely to cause injury to the worker or other person.
Assessing risks from working at height.
Common Fall Hazards at construction site.
Common Scaffold Hazards.
PERSONAL FALL PROTECTION.
Travel-Restraint Systems.
Fall-Arrest Systems.
Lifelines.
Scaffolding, also called scaffold or staging, is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures.
FULL BODY HARNESS INSPECTION RECORD Form # HSEQ - FBHIR Rev 2.docx
Harness Checklist
Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Remarks
Shoulder Straps
Chest & Back Straps
Waist Straps
Back D-Ring
Shoulder Adjustment
Legible Label
Shoulder Straps
Chest & Back Straps
Waist Straps
Leg Straps
Cuts
Burns
Holes
Deterioration
Corrosive/ worn out
Color code
Others (Specify)
Project Information
Project Name: Location:
Company name : Date:
Remarks:
Inspector Name: Signature:
Reviewed By HSE Manager / Incharge Signature:
Fire watch man training
The document provides training on fire watch duties and fire prevention. It discusses that a fire watchman is required when hot work is conducted near flammable materials. The primary role of a fire watchman is to prevent and control fires. Their responsibilities include inspecting the area, ensuring flammable materials are covered, watching for fires, knowing emergency procedures, and sounding alarms if needed. The document also discusses common fire hazards, the elements needed for a fire, fire classes, how to select the proper extinguisher, and PASS method for using an extinguisher safely.
New Employee Orientation 05
The document provides an overview of safety policies and procedures for new hires at Control Flow Inc. It outlines proper procedures and personal protective equipment requirements for various machinery, chemical handling, injury reporting, and other potential hazards. Non-compliance with safety rules could result in disciplinary action up to and including termination.
working at height
Working at height safety is important to prevent falls which can cause serious injury or death. Fall hazards exist in many work environments and proper precautions should be taken which may include fall protection equipment like harnesses, lanyards, lifelines, barricades, and properly secured ladders. Employers must inspect for fall hazards and provide training to workers on fall prevention methods appropriate for each job. Rescue plans should also be in place in case a fall occurs.
HSE PRESENTATION
This document provides an introduction and overview of occupational safety and health management. It outlines the following key points:
- The training objectives are to understand safety management systems, communication channels, workplace hazards, hazard identification and control, incident investigation, and implications of ignoring safety rules.
- Workplace hazards fall under 5 categories and can be identified through walkaround inspections and job hazard analysis. The hierarchy of controls should be followed to control hazards.
- Management must be committed to safety and develop plans, programs, policies, procedures and processes. Ignoring safety can result in injuries, death, fines and lost productivity. Effective communication and incident investigations are also important.
Recommended
A Part 1 Safety Induction
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
Work At Height
The document discusses the Work at Height Regulations in the UK. It notes that falls from height are a major cause of workplace fatalities and injuries. The regulations were introduced to improve safety by establishing a clear and consistent framework to manage risks associated with working at height. The regulations require hazards to be identified and risks to be properly assessed, controlled, and mitigated through measures such as proper planning, supervision, safe work equipment selection, inspection, and worker training.
Work at height safety
Fall hazard means a circumstance that exposes a worker in a workplace to a risk of a fall that is reasonably likely to cause injury to the worker or other person.
Assessing risks from working at height.
Common Fall Hazards at construction site.
Common Scaffold Hazards.
PERSONAL FALL PROTECTION.
Travel-Restraint Systems.
Fall-Arrest Systems.
Lifelines.
Scaffolding, also called scaffold or staging, is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures.
FULL BODY HARNESS INSPECTION RECORD Form # HSEQ - FBHIR Rev 2.docx
Harness Checklist
Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Sl. No
………. Remarks
Shoulder Straps
Chest & Back Straps
Waist Straps
Back D-Ring
Shoulder Adjustment
Legible Label
Shoulder Straps
Chest & Back Straps
Waist Straps
Leg Straps
Cuts
Burns
Holes
Deterioration
Corrosive/ worn out
Color code
Others (Specify)
Project Information
Project Name: Location:
Company name : Date:
Remarks:
Inspector Name: Signature:
Reviewed By HSE Manager / Incharge Signature:
Fire watch man training
The document provides training on fire watch duties and fire prevention. It discusses that a fire watchman is required when hot work is conducted near flammable materials. The primary role of a fire watchman is to prevent and control fires. Their responsibilities include inspecting the area, ensuring flammable materials are covered, watching for fires, knowing emergency procedures, and sounding alarms if needed. The document also discusses common fire hazards, the elements needed for a fire, fire classes, how to select the proper extinguisher, and PASS method for using an extinguisher safely.
New Employee Orientation 05
The document provides an overview of safety policies and procedures for new hires at Control Flow Inc. It outlines proper procedures and personal protective equipment requirements for various machinery, chemical handling, injury reporting, and other potential hazards. Non-compliance with safety rules could result in disciplinary action up to and including termination.
working at height
Working at height safety is important to prevent falls which can cause serious injury or death. Fall hazards exist in many work environments and proper precautions should be taken which may include fall protection equipment like harnesses, lanyards, lifelines, barricades, and properly secured ladders. Employers must inspect for fall hazards and provide training to workers on fall prevention methods appropriate for each job. Rescue plans should also be in place in case a fall occurs.
HSE PRESENTATION
This document provides an introduction and overview of occupational safety and health management. It outlines the following key points:
- The training objectives are to understand safety management systems, communication channels, workplace hazards, hazard identification and control, incident investigation, and implications of ignoring safety rules.
- Workplace hazards fall under 5 categories and can be identified through walkaround inspections and job hazard analysis. The hierarchy of controls should be followed to control hazards.
- Management must be committed to safety and develop plans, programs, policies, procedures and processes. Ignoring safety can result in injuries, death, fines and lost productivity. Effective communication and incident investigations are also important.
Emergency Response Planning Training
This document outlines an emergency response plan for (Company Name) to ensure employee safety during emergencies. The plan addresses different types of emergencies like fires, natural disasters, chemical incidents and structural failures. It provides procedures for evacuation, sheltering, and communication. Emergency supplies like first aid kits, food, water and radios are also addressed. The goal is to minimize harm through an organized response process and clear assignment of roles and responsibilities.
Hot Works Safety Training
CONTENTS:
I. What is a Hot Work ?
II. Training
III. PPE`s
IV. Hot Work Permit
V. Electric Welding
VI. Fire Prevention
VII. Fire Watch
VIII. Generator Sets
IX. Welding Equipment Checks
X. Oxy Cutting Equipment
XI. Fire Safety Precautions
XII. Compressed Gas Cylinders
XIII. Safe Practices
XIV. Heat Stress
Safe work-at-heights-presentation
Falls from heights are a major cause of injuries and fatalities. This document outlines regulations and best practices for working safely at heights. It defines fall hazards and introduces a new five-level hierarchy of controls. The highest levels involve eliminating falls or using passive fall prevention devices. Lower levels like ladders should only be used as a last resort. The document provides examples of common fall hazards and injuries in the department and recommends control measures like staying off roofs and using long-handled tools to access high areas instead of ladders whenever possible.
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Emergency Response Plan
The document outlines an emergency response plan for a factory. It details the following:
- The plan's goals are to protect lives, property, and facilities and ensure continuity of operations during emergencies.
- It provides steps to follow during an emergency, including evaluating conditions, reporting incidents, following emergency staff instructions, and using all communication tools.
- The notification process involves alarms, addressing systems, and a list of emergency contacts. External emergency services are also listed.
- Evacuation procedures involve sounding alarms, supervisors leading employees to assembly areas, and accounting for all employees.
Construction Safety Training
This document provides information on construction safety, with a focus on hot work safety, high risk work safety, and safety tools. It discusses hazards and safety procedures for hot work including welding, gas cutting, and grinding. It also covers high risk work such as work at heights, lifting and rigging, confined space entry, excavation work, and electrical work. It emphasizes the importance of pre-task planning, including job safety analyses, and using permit to work systems to identify hazards and controls before dangerous jobs.
Staff safety hand book
This document provides an introduction and contents for a health and safety training. The introduction discusses how accidents can cause suffering and how all hazardous situations must be identified and corrected. It emphasizes employees' responsibility to comply with health and safety requirements.
The contents section lists 28 topics that will be covered in the training, including health and safety policies, duties and responsibilities, personal protective equipment, permits to work, first aid, and fire prevention. The training aims to help employees fulfill their obligation to work safely.
Permit to work system
What is Permit to work system?
What are the requirements of permit to work?
Different types of permit to work system such electrical, hot and cold work etc.
General Safety Presentationupdated 04842993 1
The document outlines various workplace safety guidelines and procedures. It discusses the importance of working safely, proper personal protective equipment, emergency evacuation plans, safe operation of equipment like forklifts, identifying and avoiding death zones, lockout/tagout procedures, hazard communication, and medical emergencies. Disciplinary action may result from disregarding safety rules.
Working at-height
The document defines work at height as any work performed 1.8 meters or more above ground level, including below ground. Work above 1.8 meters requires a permit and safety checklist. Fall distances increase rapidly with time, emphasizing the need for fall protection like railings, safety harnesses attached to lifelines, and safety nets. Proper planning, equipment, and rescue procedures are required for working at heights.
Presentation working at height
Working at height remains a major cause of injuries and fatalities. Employers must properly plan work at height, use the right equipment, and provide fall protection training to competent workers. Simple precautions like performing work from ladders safely and avoiding fragile surfaces can reduce risks. Workers should avoid working at unprotected heights whenever possible.
Amn safety induction j 175 - staff rev 4 - s 14
This document provides an induction training summary for a construction project at the Dubai Design District Office Building. It includes:
1. Key personnel overseeing the project including the Project Manager, Technical Manager, and HSE Manager.
2. Health and safety policies and objectives to provide a safe working environment and achieve zero injuries or fatalities through compliance with regulations and building a strong safety culture.
3. Safety requirements and prohibited behaviors covering smoking, alcohol and drugs, horseplay, proper PPE use, traffic and pedestrian rules, and more. Failure to comply can result in removal from the site or legal penalties.
Work Permit System
This document discusses work permit systems and their importance for safety. It outlines the key aspects that work permits address like nature of work, equipment, location, hazards. Work permits are used to authorize specific jobs in defined areas and times. They aim to prevent accidents by clearly identifying responsibilities and hazards. The document also discusses types of work permits for hot work, confined space entry, excavation and their associated precautions to minimize risks.
Permit to work training
Permit To Work
Types of Permit To Work
Hot Work Permit
Confined Space Entry Permit
Electrical Permit
Excavation Permit
Radiography Permit
Crane Critical Lifts Permit
Man Basket Operation
Permit Issuer Responsibilities
Permit Receiver Responsibilities
HSE Permit Coordinator
Responsibilities
Revalidation of the Permit
Work Permit Flow Chart
HSE-INDUCTION-TRAINING.ppt
This document provides an overview of safety policies and procedures for Fairdeal QHSE. It defines key safety terms and outlines responsibilities for management, supervisors, and employees to ensure a safe work environment and prevent accidents. Specific safety topics covered include personal protective equipment, housekeeping, electrical safety, fire prevention, lifting techniques, confined spaces, and prohibited behaviors. Management is responsible for training and safety compliance, while employees must follow safety rules and report any issues or injuries. Non-compliance may result in disciplinary actions up to termination.
Visitors SHE Induction Presentation 2016
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Health safety induction_overview
This document provides an overview of health and safety policies and procedures for an organization. It outlines roles and responsibilities, key risks to be aware of, fire evacuation procedures, and what to do in the event of an emergency. Employees and learners are responsible for working safely, reporting any issues, and knowing who to contact for assistance. Managers must ensure safety policies are followed and that staff have the proper training and equipment to perform their roles safely.
Arabtec safety man and machine presentation june 2019 rev-1
This document provides guidance on safety practices for workers interacting with machinery. It discusses common causes of accidents like being struck by machinery and falling debris. It emphasizes the employer's responsibility to ensure traffic plans, segregated routes, reduced speeds, trained operators, and proper maintenance. Banksman duties are outlined like monitoring traffic and stopping unsafe work. Inspection requirements are provided for different types of machinery like dump trucks, excavators, and concrete mixers. Proper personal protective equipment and tyre safety are also covered.
Safety in confined space
What is a confined space?
Hazards of entering and working in Confined Spaces
Actions to taken / Preparation before entering a confined space
Checklist prior to commencing work in a confined space
Office safety
This document discusses common office safety hazards and how to prevent injuries. It covers potential physical, chemical, biological, ergonomic and psychological hazards. Key risks include slips, trips and falls, back injuries from improper lifting or workstation setup, eye strain from screens, cuts and punctures from sharp objects, and electrical hazards. Proper ergonomics, housekeeping, chemical handling, fire safety procedures, and accident reporting are emphasized to create a safe work environment.
Ppt
This document provides instructions for visitors of a production site regarding safety, health, and environmental protection. It lists several rules including prohibiting smoking, alcohol/drugs, taking unauthorized photos, and entering restricted areas. Visitors must follow safety signs, wear proper protective equipment, and notify employees of any medical conditions or emergencies. The goal is to protect all people and mitigate environmental impacts while on the premises.
Emergency procedures
The document outlines emergency procedures for Al Akhawayn University. In the event of a suicide threat:
1. Immediately notify security, housing, health center, and on-call physician.
2. The patient will receive care at the health center or be evacuated to a clinic if needed.
3. A university counselor may be called in to assist the person in distress.
4. Housing officers will closely supervise the concerned person and notify colleagues.
5. The physician will inform parents about the case, even without patient consent. Prior suicidal attempts will be noted in records as those individuals are at higher risk.
More Related Content
What's hot
Emergency Response Planning Training
This document outlines an emergency response plan for (Company Name) to ensure employee safety during emergencies. The plan addresses different types of emergencies like fires, natural disasters, chemical incidents and structural failures. It provides procedures for evacuation, sheltering, and communication. Emergency supplies like first aid kits, food, water and radios are also addressed. The goal is to minimize harm through an organized response process and clear assignment of roles and responsibilities.
Hot Works Safety Training
CONTENTS:
I. What is a Hot Work ?
II. Training
III. PPE`s
IV. Hot Work Permit
V. Electric Welding
VI. Fire Prevention
VII. Fire Watch
VIII. Generator Sets
IX. Welding Equipment Checks
X. Oxy Cutting Equipment
XI. Fire Safety Precautions
XII. Compressed Gas Cylinders
XIII. Safe Practices
XIV. Heat Stress
Safe work-at-heights-presentation
Falls from heights are a major cause of injuries and fatalities. This document outlines regulations and best practices for working safely at heights. It defines fall hazards and introduces a new five-level hierarchy of controls. The highest levels involve eliminating falls or using passive fall prevention devices. Lower levels like ladders should only be used as a last resort. The document provides examples of common fall hazards and injuries in the department and recommends control measures like staying off roofs and using long-handled tools to access high areas instead of ladders whenever possible.
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Emergency Response Plan
The document outlines an emergency response plan for a factory. It details the following:
- The plan's goals are to protect lives, property, and facilities and ensure continuity of operations during emergencies.
- It provides steps to follow during an emergency, including evaluating conditions, reporting incidents, following emergency staff instructions, and using all communication tools.
- The notification process involves alarms, addressing systems, and a list of emergency contacts. External emergency services are also listed.
- Evacuation procedures involve sounding alarms, supervisors leading employees to assembly areas, and accounting for all employees.
Construction Safety Training
This document provides information on construction safety, with a focus on hot work safety, high risk work safety, and safety tools. It discusses hazards and safety procedures for hot work including welding, gas cutting, and grinding. It also covers high risk work such as work at heights, lifting and rigging, confined space entry, excavation work, and electrical work. It emphasizes the importance of pre-task planning, including job safety analyses, and using permit to work systems to identify hazards and controls before dangerous jobs.
Staff safety hand book
This document provides an introduction and contents for a health and safety training. The introduction discusses how accidents can cause suffering and how all hazardous situations must be identified and corrected. It emphasizes employees' responsibility to comply with health and safety requirements.
The contents section lists 28 topics that will be covered in the training, including health and safety policies, duties and responsibilities, personal protective equipment, permits to work, first aid, and fire prevention. The training aims to help employees fulfill their obligation to work safely.
Permit to work system
What is Permit to work system?
What are the requirements of permit to work?
Different types of permit to work system such electrical, hot and cold work etc.
General Safety Presentationupdated 04842993 1
The document outlines various workplace safety guidelines and procedures. It discusses the importance of working safely, proper personal protective equipment, emergency evacuation plans, safe operation of equipment like forklifts, identifying and avoiding death zones, lockout/tagout procedures, hazard communication, and medical emergencies. Disciplinary action may result from disregarding safety rules.
Working at-height
The document defines work at height as any work performed 1.8 meters or more above ground level, including below ground. Work above 1.8 meters requires a permit and safety checklist. Fall distances increase rapidly with time, emphasizing the need for fall protection like railings, safety harnesses attached to lifelines, and safety nets. Proper planning, equipment, and rescue procedures are required for working at heights.
Presentation working at height
Working at height remains a major cause of injuries and fatalities. Employers must properly plan work at height, use the right equipment, and provide fall protection training to competent workers. Simple precautions like performing work from ladders safely and avoiding fragile surfaces can reduce risks. Workers should avoid working at unprotected heights whenever possible.
Amn safety induction j 175 - staff rev 4 - s 14
This document provides an induction training summary for a construction project at the Dubai Design District Office Building. It includes:
1. Key personnel overseeing the project including the Project Manager, Technical Manager, and HSE Manager.
2. Health and safety policies and objectives to provide a safe working environment and achieve zero injuries or fatalities through compliance with regulations and building a strong safety culture.
3. Safety requirements and prohibited behaviors covering smoking, alcohol and drugs, horseplay, proper PPE use, traffic and pedestrian rules, and more. Failure to comply can result in removal from the site or legal penalties.
Work Permit System
This document discusses work permit systems and their importance for safety. It outlines the key aspects that work permits address like nature of work, equipment, location, hazards. Work permits are used to authorize specific jobs in defined areas and times. They aim to prevent accidents by clearly identifying responsibilities and hazards. The document also discusses types of work permits for hot work, confined space entry, excavation and their associated precautions to minimize risks.
Permit to work training
Permit To Work
Types of Permit To Work
Hot Work Permit
Confined Space Entry Permit
Electrical Permit
Excavation Permit
Radiography Permit
Crane Critical Lifts Permit
Man Basket Operation
Permit Issuer Responsibilities
Permit Receiver Responsibilities
HSE Permit Coordinator
Responsibilities
Revalidation of the Permit
Work Permit Flow Chart
HSE-INDUCTION-TRAINING.ppt
This document provides an overview of safety policies and procedures for Fairdeal QHSE. It defines key safety terms and outlines responsibilities for management, supervisors, and employees to ensure a safe work environment and prevent accidents. Specific safety topics covered include personal protective equipment, housekeeping, electrical safety, fire prevention, lifting techniques, confined spaces, and prohibited behaviors. Management is responsible for training and safety compliance, while employees must follow safety rules and report any issues or injuries. Non-compliance may result in disciplinary actions up to termination.
Visitors SHE Induction Presentation 2016
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Health safety induction_overview
This document provides an overview of health and safety policies and procedures for an organization. It outlines roles and responsibilities, key risks to be aware of, fire evacuation procedures, and what to do in the event of an emergency. Employees and learners are responsible for working safely, reporting any issues, and knowing who to contact for assistance. Managers must ensure safety policies are followed and that staff have the proper training and equipment to perform their roles safely.
Arabtec safety man and machine presentation june 2019 rev-1
This document provides guidance on safety practices for workers interacting with machinery. It discusses common causes of accidents like being struck by machinery and falling debris. It emphasizes the employer's responsibility to ensure traffic plans, segregated routes, reduced speeds, trained operators, and proper maintenance. Banksman duties are outlined like monitoring traffic and stopping unsafe work. Inspection requirements are provided for different types of machinery like dump trucks, excavators, and concrete mixers. Proper personal protective equipment and tyre safety are also covered.
Safety in confined space
What is a confined space?
Hazards of entering and working in Confined Spaces
Actions to taken / Preparation before entering a confined space
Checklist prior to commencing work in a confined space
Office safety
This document discusses common office safety hazards and how to prevent injuries. It covers potential physical, chemical, biological, ergonomic and psychological hazards. Key risks include slips, trips and falls, back injuries from improper lifting or workstation setup, eye strain from screens, cuts and punctures from sharp objects, and electrical hazards. Proper ergonomics, housekeeping, chemical handling, fire safety procedures, and accident reporting are emphasized to create a safe work environment.
What's hot (20)
Arabtec safety man and machine presentation june 2019 rev-1
Arabtec safety man and machine presentation june 2019 rev-1
Similar to VISITOR SAFETY INDUCTION Form # HSEQ - VSI Rev 2 - S.docx
Ppt
This document provides instructions for visitors of a production site regarding safety, health, and environmental protection. It lists several rules including prohibiting smoking, alcohol/drugs, taking unauthorized photos, and entering restricted areas. Visitors must follow safety signs, wear proper protective equipment, and notify employees of any medical conditions or emergencies. The goal is to protect all people and mitigate environmental impacts while on the premises.
Emergency procedures
The document outlines emergency procedures for Al Akhawayn University. In the event of a suicide threat:
1. Immediately notify security, housing, health center, and on-call physician.
2. The patient will receive care at the health center or be evacuated to a clinic if needed.
3. A university counselor may be called in to assist the person in distress.
4. Housing officers will closely supervise the concerned person and notify colleagues.
5. The physician will inform parents about the case, even without patient consent. Prior suicidal attempts will be noted in records as those individuals are at higher risk.
Site_Safety_Induction on Health, Safety and Environment .pdf
Welcome to the definitive guide on site safety induction. In this comprehensive article, we delve into the critical aspects of ensuring safety on construction sites and beyond. This guide is designed to equip both employers and employees with the knowledge and tools necessary to create a secure work environment.
We kick off by establishing the importance of site safety, emphasizing its role in protecting lives, minimizing accidents, and adhering to legal requirements. From there, we navigate through the maze of regulations, shedding light on the legal obligations that govern safety practices.
Moving forward, we explore the shared responsibilities of employers and employees in maintaining a safe workplace. We delve into the intricacies of hazard identification and risk assessment, providing practical tips on spotting potential dangers and implementing effective risk mitigation strategies.
Personal Protective Equipment (PPE) takes center stage as we outline its significance in safeguarding against various hazards. We provide a comprehensive overview of different types of PPE, their proper usage, and maintenance protocols.
No stone is left unturned as we delve into safety procedures and protocols, arming readers with the knowledge to navigate emergency situations with confidence. From fire emergencies to medical incidents, we offer step-by-step guidance on handling crises effectively.
But safety induction isn't a one-size-fits-all approach. We recognize the importance of addressing site-specific hazards, tailoring safety measures to suit the unique challenges of different work environments.
Training and education emerge as cornerstones of a robust safety culture. We emphasize the importance of ongoing training initiatives, empowering workers with the skills and knowledge needed to stay safe on the job.
Drawing from real-life examples and case studies, we illustrate the tangible impact of safety practices on construction sites. From success stories to cautionary tales, these anecdotes serve as powerful reminders of the stakes at hand.
In conclusion, this article serves as a comprehensive roadmap to site safety induction, offering invaluable insights and practical advice for fostering a culture of safety in the workplace. Whether you're a seasoned professional or a newcomer to the industry, this guide is your ultimate companion in the journey towards a safer tomorrow."
ACT Environment Induction
This document provides an induction on safety, health, security and environmental policies and procedures at an aerial terminal (ACT). It outlines the terminal layout, common hazards, and safety requirements. Employees and contractors must be aware of equipment, chemical hazards, electrical safety and other risks. High-risk areas like the quayside and inspection yard are identified. Proper protective equipment, work permits, transportation safety, emergency procedures and accident reporting are reviewed. The objectives are to prevent accidents and ensure procedures with subcontractors are followed. Environmental protection, prohibited substances, and occupational health services are also addressed.
SITE INDUCTION Version 2
This induction provides information to new workers about a photovoltaic plant project, including installing security fencing, mounting solar panels, and trenching for cables. It outlines key personnel such as the project manager and site manager, as well as contractors working on the project. The induction details health and safety responsibilities and requirements like using proper personal protective equipment. It also describes site rules, welfare facilities, emergency procedures, accident reporting, and environmental protection protocols. Hazards addressed include overhead power lines and moving vehicles and heavy machinery.
Emergency Response Plan 9 Oct 2021
Kindly see attached PowerPoint Awareness Presentation (Emergency Response Plan)
Conducted on 9th of Oct 2021 Time 09:30 am.
With AGNICE Contracting
117921179 saudi-aramco-safety-handbook
The document provides guidance on confined space entry permitting and safety procedures. It defines a confined space and requires a Confined Space Entry Permit for any entry. It outlines preparation requirements including isolating and securing the space according to lockout/tagout procedures. It also requires atmospheric testing and ventilation of the space if needed prior to entry. Rescue procedures and equipment must be in place before personnel are allowed to enter.
Safety handbook Saudi Aramco BY Muhammad Fahad Ansari 12IEEM14
The document provides guidance on confined space entry permitting procedures. It defines a confined space and outlines the permit process, which includes preparing the space by isolating it, conducting atmospheric testing, providing ventilation and rescue equipment, and restoring the space after entry. Personnel must obtain a Confined Space Entry Permit to enter any confined space to protect them from hazards therein. The permit ensures the space is properly prepared for safe entry and exit.
Airport Emergency
The document provides information on airport emergencies and procedures. It includes a table of contents listing sections on airport emergencies, bomb threat emergencies, and a conclusion. The introduction discusses the importance of preparing for various emergency situations that airports may face. The airport emergencies section then outlines different types of hazards airports need to plan for, such as aircraft incidents, natural disasters, bomb incidents, and hazardous materials. The bomb threat emergency section provides procedures for responding to bomb threats involving aircraft or buildings. This includes evacuating areas and notifying authorities.
Iipp haz com-ppe-fp-evac-p65-bp
The document outlines the safety training agenda presented by Ken Pretell, Safety Engineer. It covers the company's Injury and Illness Prevention Plan, including responsibilities, inspections, accident reporting and investigations. It also provides guidelines and requirements for personal protective equipment, lock-out/tag-out procedures, confined spaces, fire prevention, hazardous materials handling, and emergency evacuation.
SHSInduction.pdfkhkggghjychjjmkhd5rfjvxf
Presentation of ITER Occupational Health and Security approach:
- Safety purpose is to achieve proper operating conditions and prevent/mitigate accidents.
- Security ensures protection of premises, nuclear material, information, and people.
- Rules include wearing badges, respecting traffic and smoking regulations, and protecting confidential information.
Safety protocols of construction site.pptx
On construction sites, workplace safety is the responsibility of employers and workers' well-being should be the top priority. Personal protective equipment like hard hats, safety glasses, gloves, and vests are provided to all workers and visitors on site. Minimum PPE includes hard hats, safety glasses, gloves, safety vests, long pants, and steel-toed boots. Additional PPE like hearing protection, respiratory masks, face shields, and safety harnesses are also required for certain tasks. Proper material storage, signage, lighting, emergency plans, and a clean, tidy work area are important for basic safety.
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
The said paper was presented by Rajesh Prasad in IC TRAM 2018 (International Conference- Technological Advancement in Railways and Metro Projects at Manekshaw Centre New Delhi on 04.10.2018
Major Event SEC420 Major Event Pro.docx
Major Event
SEC420 Major Event Protection
Name
Class
Date
Professor
Major Event Protection
At a major concert being held at an outdoor venue security vulnerabilities must be first assessed before the artist can perform as well as to ensure the safety of concert goers and concert staff. A major concert is a large venue that requires adequate security be present to police the thousands of people in an attendance but other smaller security details must also be addressed. Before an effective security plan can be developed a security assessment must first be conducted. The security assessment will identify the security needs for the major outdoor concert event and identify security weaknesses and gaps that must be addressed.
In this case the major concert will involve a country superstar and will be held at the local outdoor amphitheatre. The amphitheatre is large and will hold up to 20,000 concert goers. The outdoor amphitheatre includes a large stage with underground offices, dressing rooms, and security stations that hold concert staff, artists and crew, and security personnel. There are eight different potential entry points into the venue wit tow of these points being off limits to concert goers. These areas are restricted and only accessible to artists, their entourage, and security personnel as well as concert staffers. One entrance is used for suppliers and retailers.
Preplanning Stage
At a major concert venue, that will be held outside there are many potential security risks that will present themselves requiring an effective assessment in order to develop a comprehensive security plan. The security assessment of the concert venue begins with assessment planning that involves determining who, what, and where the assessment will be conducted (Bickel, 2007). When an event, such as a major concert, will be occurring planning should begin months before the event. There are many small and large details that must first be addressed and assessed before the concert can occur.
The planning stage also involves determining the budget including available resources and cost of properly securing the venue as well as the logistics of ensuring every aspect of the security are addressed. If every detail of the security plan is not preplanned the security plan cannot be effective. For example if the security plan included security all gates entrances but failed to secure the area where the artist prepare the security plan is ineffective. The planning stage also involves conducting the risk and threat assessments. The risk assessment provides answers on potential security risks while the threat assessment identifies potential security threats.
The risk and threat assessments will assist security staff in identifying potential threats, such as the regular crimes committed that could occur at the concert venue that include theft, gang activity, and vandalism or potential threats due to disasters out of ...
Chapter 4 health, safety and security procedures
The document outlines several objectives related to safety in the hotel industry. It aims to stress the importance of protecting guests and employees, identify internal and external safety resources, describe threats unique to hotels, and discuss important safety measures. Specific topics covered include an employer's duty of care, legal liability, analyzing facility hazards, staff training requirements from OSHA, emergency policies/procedures, and addressing threats like pools, spas, parking lots, and more through proper signage and documented safety protocols. Risk management is also defined as the process of identifying risks and determining how to handle exposure to potential problems.
DigiPlex induction briefing
This document provides a site induction for visitors to a DigiPlex data center facility. It summarizes DigiPlex's services as secure, resilient, and efficient co-location for customers' IT equipment. It outlines several health and safety protocols for visitors to follow, such as wearing personal protective equipment, being aware of fire hazards and evacuation procedures, and respecting security measures. The induction emphasizes maintaining DigiPlex's record of high uptime by ensuring safety in the computer rooms and following all procedures.
Induction
The document is an induction presentation for contractors working at the Australian Foundation for Disability (AFFORD). It outlines AFFORD's safety policies and procedures, including requirements for contractors to complete an induction and be issued a pass, procedures for signing in and out of sites, traffic management policies, and contacts for issues that may arise. Safety is AFFORD's top priority and contractors must comply with all health and safety policies while on site.
ehs
The document outlines the objectives and policies of an EHS (Environment, Health and Safety) department for a construction company. The key objectives are to determine EHS parameters, establish command structure for hazard prevention, define responsibilities, identify hazardous operations, and focus on performance improvement. It also details general EHS rules and regulations for workers, applicable legal requirements, and an overview of available personal protective equipment including safety helmets, shoes, ear and eye protection, gloves, harnesses, and safety nets.
Site Induction
This document provides an induction for a construction site. It summarizes site layout, parking, entry and sign in procedures. It outlines required personal protective equipment and site rules regarding safety certification, vehicle operation, emergencies, fire equipment, signage, working at heights, ladders, manual handling and noise levels. The induction is intended to provide essential safety information to all workers on the site.
HSE-BMS-007 Security Management.ppt
This document outlines the security policy and procedures for a construction site. It defines the responsibilities of the security manager, supervisors, and guards. The security manager is responsible for developing security operations and ensuring compliance. Security supervisors supervise guards and investigate issues. Guards control access points, patrol the site, and prevent unauthorized entry. The document also describes perimeter fences, gate controls, ID checks, vehicle entry protocols, emergency contacts and random alcohol testing to maintain security.
Similar to VISITOR SAFETY INDUCTION Form # HSEQ - VSI Rev 2 - S.docx (20)
Site_Safety_Induction on Health, Safety and Environment .pdf
Site_Safety_Induction on Health, Safety and Environment .pdf
Safety handbook Saudi Aramco BY Muhammad Fahad Ansari 12IEEM14
Safety handbook Saudi Aramco BY Muhammad Fahad Ansari 12IEEM14
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
PROTOCOL FOR SAFE EXECUTION OF INFRA PROJECTS BY RAJESH PRASAD ED RVNL DT 04...
More from Dwarika Bhushan Sharma
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP.pdf
3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP3-STOP FALLS, CLEAN UP, PICK UP, WIPE UP-STOP FALLS, CLEAN UP, PICK UP, WIPE UP
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK 2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK
1-HAZARDOUS CHEMICALS.pdf
This document provides the name of a company but no other details. It contains only the words "Company Name" with no other context or information provided. In just two words, the document states the name of a company without any other descriptive text.
PRE-START BRIEFING Form # HSEQ - PSB Rev 2 -.docx
Project Information:
Project Name:
Location: Supervisor :
Company name : Date:
Task Description:
Before work starts, the following must be in place
Induction Supervision Test Certificates Communication in same language Method Statement Risk Assessment Permit To Work Area Lighting
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Fall from height Training Access Ladder Access Handrail Edge Protection Secure Ladder Adequate Work Platform Guards for Openings Safety Harness Life Lines
Others( Specify)
Manual Handling Training Check Weight Mechanical Aids Access Route Team Lifting Wrong method Right Method
Power tools Training Color code inspection tag Check Cable Wheel guards Safe plug & sockets Cable Protection Proper Scaffold Cable Overhead Rotatory part guards
Scaffold Scaffold Tag Edge Protection Check Overhead works Access Ladder Adequate Work Platform Weather condition Out riggers Ladder 3 feet above platform Safety Harness
SELECT HAZARDS SELECT CONTROLS
( Tick to identify the controls in place)
Risk Assessment
Lifting Plan Tag Lines Lifting points / hooks Banks man Load stability Check Lifting gear Examination /Inspection Sharp edges protected
Lifting operations Weather/ Wind Speed Ground conditions Exclusion zone Communication Loading/ unloading vehicles Spreader Beams Check Ground conditions Check outriggers Others
Fire Fire Extinguisher Fire Hose Fire Exit Assembly point others
Slip/Trip Clean before you go Barricade the waste Waste Management Clean Access Housekeeping Clean liquid spillage Access signs Maintain access/ Egress
PPE
Safety Harness
Safety Helmet Coveralls Hi vis Jacket Safety Shoe Face Shield Ear Protection
Dust mask Respiratory Equipment Life line/ harness anchorage Hand Gloves Goggles/ Glass
Pre start Briefing done by: Signature:
Reviewed By HSE Manager/ In charge: Signature:
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
Code of Practice
C.O.P # 01
Fire Prevention Requirements
(Management of Combustible Materials & Electrical Inspections)
Rev. 01, Mar 23
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
This document is a sub-contractor pre-start HSE checklist that must be filled out daily before starting any activity. It collects project information, task details including description, location, workers and duration. It also checks that various HSE prerequisites are in place such as safety inductions, risk assessments, PPE availability, inspection of tools and equipment, and that unsafe conditions have been rectified. The sub-contractor must acknowledge that all precautions and control measures have been taken and the workers have been deemed competent to perform the task safely.
STORE INSPECTION Form # HSEQ - Form 2 Rev 2.docx
Project Information
Project Name: Store No.
Location: Contact Person:
Company Name: Arabtec Construction LLC. Date:
Sr. Description Yes No N/A Comments
1. Is access to stores are restricted to authorized personnel only?
2. Are there clear spaces around racks and stacks of stored materials and are adequate gangways provided between them?
3. Are stacks and storage kept clear of light fittings and hot surfaces?
4. Are all stocks of flammable liquids kept in purpose-built flammable storage liquid stores?
5. Are storage areas generally cleaned and tidy?
6. Are flammable liquids kept away from all possible sources of ignition?
7. Emergency exit signs are available in right locations
8. Smoke detectors/fire alarm are visible and accessible.
9. Fire extinguishers are available are serviced regularly
10. Are free standing shelves and cupboards secured for stability?
11. Are heavy items stored at a suitable height?
12. Are chemical containers used for storage suitable and clearly labelled?
13. Is there adequate light in the storage area?
14. Are all small loose items secured in appropriate storage?
15. Are warning notices, prohibiting smoking and naked lights prominently displayed?
16. Others if any:
Remarks:
Inspected by: Signature:
Reviewed by Project Manager/HSE Manager Signature:
WITNESS STATEMENT FORM.docx
This document records a statement for a project located at an unspecified location. The statement is provided and written by an individual who acknowledges that the information is true to the best of their recollection. The individual provides their name, signature, position and date at the end of the statement.
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Injury ☐ Minor Injury ☐ Property Damage ☐ Environmental ☐ Other
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
4. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
5. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Corporate Office Remarks:
HSE FORMS (COVER PAGE)2 Form # HSEQ - Rev 2.docx
This document pertains to health, safety, environment, and quality forms from an HSEQ department. The HSEQ department handles forms related to health, safety, environment, and quality assurance. No other details are provided about the specific forms or purpose of the HSEQ department.
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
3. Control Measures: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Method statement & Risk assessment developed, approved & communicated? ☐ ☐ ☐
Availability of rescue procedure and equipment? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Workplace appropriately illuminated ☐ ☐ ☐
Any high risk activity associated that requires PTW (i.e. hot work, CSE)? ☐ ☐ ☐
Forced ventilation provided? ☐ ☐ ☐
Are all necessary Permit approved and displayed at work location? ☐ ☐ ☐
Means of communication available? (Mobile, radio etc.) ☐ ☐ ☐
Safe access / Working Platform provided? ☐ ☐ ☐
Mandatory/specific good condition PPEs are available ☐ ☐ ☐
Availability of barricades/protection to prevent unauthorized or accidental entry? ☐ ☐ ☐
Life Line provided? ☐ ☐ ☐
Warning signs posted? ☐ ☐ ☐
Fall Protection equipment (e.g. full body harness) available? ☐ ☐ ☐
Availability of Fall protection arrangement? ☐ ☐ ☐
Other(s): ☐ ☐ ☐
Adequate Lighting provided? ☐ ☐ ☐
☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Location / Area :
Panel No : Voltage:
Permit Validity:
Time (from): _______Hrs.
Time (To): __________Hrs.
Date:
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
No: Checks Yes-No-NA Checks Yes-No-NA
ENERGIZATION (“Power On”) ISOLATION (“Power Off”)
1. Safety tool box briefing done. ☐ ☐ ☐
Method statement/Risk assessment in place. ☐ ☐ ☐
2. Authorized personnel / operators available. ☐ ☐ ☐
Authorized personnel / operators available. ☐ ☐ ☐
3. Method statement/Risk assessment in place. ☐ ☐ ☐
Adjacent live areas protected. ☐ ☐ ☐
4. Safety Barriers in place and safety signage Displayed. ☐ ☐ ☐
PPE available, high voltage rubber gloves, Safety goggles and floor mat. ☐ ☐ ☐
5. Working area is well lighted. ☐ ☐ ☐
Isolation/Lock-out in place. ☐ ☐ ☐
6. Electrical instruments are available for any Purpose. ☐ ☐ ☐
Electrical circuits “proved” by calibrated Instrument and found out to be no power. ☐ ☐ ☐
7. Correct PPE available, high voltage rubber Gloves, safety goggles and floor mat. ☐ ☐ ☐
Unauthorized workers are cleared from the Area. ☐ ☐ ☐
8. Approved WIR for installation, testing and Termination are attached to the permit. ☐ ☐ ☐
Standby operatives in the event of contact With live circuits. ☐ ☐ ☐
9. Emergency light (Flashlight) available. ☐ ☐ ☐
Emergency light (Flashlight) available. ☐ ☐ ☐
10. Is live work absolutely necessary? ☐ ☐ ☐
Emergency response plan available ☐ ☐ ☐
11. Unauthorized workers are cleared from the area.
☐ ☐ ☐
Other ( Specify): ☒ ☐ ☐
12. Power cable route from panel board to plant & equipment has been checked ☐ ☐ ☐
13 Emergency response plan available ☐ ☐ ☐
14 Other ( Specify): ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature: Time:
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
Project Information
Project Name:
Date: Location:
Sr. Equipment type / Name Registration No & Exp Date Company Name
Operator Name / Mb. No Operator Third party competency certificate expiry date Operator License expiry date Equipment & Plant 3rd Party Inspection Certificate expiry date SWL / Capacity Signalman /Rigger name & TPC Exp Comment
1
2
3
4
5
6
7
8
9
10.
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge: Signature:
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
This 5-page document is a checklist for inspecting labour accommodation on a weekly basis. It contains over 100 questions across various categories including access/egress, housekeeping, septic tanks, food preparation, living quarters, firefighting, emergency procedures, first aid, record keeping, environment, and civil defence requirements. Inspectors are to verify that accommodation meets standards for safety, sanitation, emergency preparedness and regulatory compliance by completing the checklist and noting any needed corrective actions or due dates.
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT
(To be submitted to the HSEQ Corporate Office within 7 days of incident.)
1. Project Information:
Project Name: Click here to enter text.
Report No.: Click here to enter text.
Project Location: Click here to enter text.
Property No.: Click here to enter text.
☐ Fatality ☐ Major Incident ☐ Minor Incident
2. Describe the Incident in detail:
Answer who, what, why, where, when & how in this section: (Attach additional pages if required)
Click here to enter text.
☐ Photos Attached
3. Incident Root Causes:
Describe direct, indirect & root cause: (Attach additional pages if required)
Click here to enter text.
4. Key Corrective Actions to Prevent Recurrence:
Describe the corrective actions with timeframe: (Attach additional pages if required)
Click here to enter text.
5. Key Corrections Taken Immediately after the Incident:
Attach additional pages if more space is required:
Click here to enter text.
6. Witnesses:
I declare that I witnessed the incident and the information provided above is true, correct and complete.
No. Name Designation Signature Date
1. Click here to enter text.
Click here to enter text.
Click here to enter text.
2. Click here to enter text.
Click here to enter text.
Click here to enter text.
7. Incident Information:
Initial Incident Report No.: Click here to enter text.
Date Reported: Click here to enter text.
Date of Incident: Click here to enter text.
Time of Incident: Click here to enter text.
Type of Incident: ☐ Near Miss
☐ Major Environmental Incident
☐ Serious Dangerous Occurrence
☐ Equipment / Property Damage
☐ Medical Treatment Case (MTC)
☐ Restricted Work Case (RWC)
☐ Lost Workday Case (LWC)
☐ Serious Occupational Illness/Disease
☐ Class 1 Injuries
☐ Permanent Partial Disability (PPD)
☐ Permanent Total Disability (PTD)
☐ Fatality (F)
Recordkeeping: ☐ Reportable ☐ Recordable
Incident Location on Site: Click here to enter text.
Applicable Reports: ☐ Police
☐ Medical
☐ Other (Specify)
Click here to enter text.
Attached: ☐ Yes ☐ No
☐ Yes ☐ No
☐ Yes ☐ No
8. Injured Person’s Personal Details:
In case of an incident with more than one injured person, complete the information for each person using separate forms.
Name: Click here to enter text.
Occupation: Click here to enter text.
Company: Click here to enter text.
MB / Oracle No.: Click here to enter text.
Nationality: Click here to enter text.
Date of Birth: Click here to enter text.
Passport Number: Click here to enter text.
Length of Service: Click here to enter text.
Gender: ☐ Male ☐ Female
Labour Card No.: Click here to enter text.
9. Incident Causes Details: To be supported with factual evidence
Immediate Cause
(Unsafe Acts) ☐ Failure to secure
☐ Failure to warn
☐ Removing / Defeating Safety Devices
☐
HSE INDUCTION Form # HSEQ - HSEI Rev 2 -.doc
HSE INDUCTION
(Workers)
Name: _________________________________ Trade: ____________________________
M.B. No./Company Name : ________________
Date of Joining: __________________________
SL. N SUBJECT ON INDUCTION PREVIOUS SAFETY EXPOSURE FURTHER SAFETY TRAINING NEED ANALYSIS
1. Introduction Safety Requirements
2. Working Safety is of Primary Importance
3. General Safety Rules
4. Basic Safety Requirements
5. House Keeping
6. Health, Hygiene & Welfare Facilities
7. Fire Extinguisher / Fire Fighting
8. Emergency Procedure
9. Safety Violations & Penalty
10. Safety Award
11. Manual Handling
Induction Given By: Name: ___________________________
Designation: ___________________________
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
1st Warning 0 Ref. No. ______________
2nd Warning 0
3rd Warning 0
4th Warning 0 Date: ________________
Employee’s Name : ______________________________________ M.B No. : __________
Occupation : _____________________________________________________________________
Location / Project Site: _____________________________________________________________________
You have committed the following HSE violation/s:
………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….….
The employee is hereby warned that if the violation is repeated further disciplinary action can be
taken as per the company Code of Conduct.
ORIGINATOR APPROVED BY (MANAGER IN CHARGE / ARABTEC HSEQ & ORG. RISK Manager)
Name: _______________________________ Name: _____________________________
Designation: _______________________________ Designation: _____________________________
Signature:
_______________________________ Signature:
_____________________________
Employee Acknowledgement:
I the undersigned have received this Safety warning letter / disciplinary notice and I admit that I have understood the contents.
0 Received on: ………………………….. (Date) Signature: ………………………………..…..
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Project Information
Project Name: Porta Cabin No:
Location: Contact Person:
Company Name: Date :
Sr. Description Yes No N/A Comments
1. Emergency exit signs are available in right locations
2. Fire alarms and fire extinguishers are visible and accessible.
3. Fire doors (e.g. in stairways) are kept closed unless equipped with automatic closing device
4. Fire extinguishers are serviced regularly
5. Corridors and stairways are kept free of obstruction
6. Fire escape/ evacuation plan available and posted
7. First aid box available
8. Floor surfaces are kept dry and free of slip hazards
9. Electrical cords and plugs are in good condition with proper Grounding
10. Kitchen equipment checked
11. Fire blanket available in the pantry
12. Heat detector available in the pantry
13. Toilets floor clean and dry
14. Are staff trained to use Fire Extinguishers
15. Hand wash/ soap solution available in the toilet
16. Civil Defense or Authority approval
17. Others if any:
Remarks:
Inspected By: Signature:
Reviewed By HSE Manager / In charge : Signature:
More from Dwarika Bhushan Sharma (20)
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
5 - CLOWNS BELONG IN THE CIRCUS & NOT ON THE JOB.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
2-THERE'S A SAFE WAY TO DO EVERY JOB, OF YOU DON'T KNOW ASK.pdf
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
FIRE PREVENTION REQUIREMENTS Form # HSEQ - Rev 2.docx
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
SUB CONTRACTORS HSE CHECKLIST Form # HSEQ - SPSC Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
PROJECT LEADER INCIDENT BRIEFING Form # HSEQ - PLIB Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIFT SHAFT ENTRY PERMIT Form # HSEQ - LSEP Rev 2 -.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
LIVE ELECTRICAL WORK PERMIT Form # HSEQ - LEP Rev 2.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
MOBILE PLANT REGISTER Form # HSEQ - MPR Rev 3.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
LABOR ACCOMMODATION CHECKLIST Form # HSEQ - LAC Rev 2.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
INCIDENT INVESTIGATION REPORT Form # HSEQ - IIR Rev 9 -.docx
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
HSE WARNING LETTER-DISCIPLINARY NOTICE Form # HSEQ - HSEWL Rev 6.doc
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
OFFICE PORTA CABIN INSPECTION Form # HSEQ - OPC Rev 2.docx
Recently uploaded
How to Download & Install Module From the Odoo App Store in Odoo 17
Custom modules offer the flexibility to extend Odoo's capabilities, address unique requirements, and optimize workflows to align seamlessly with your organization's processes. By leveraging custom modules, businesses can unlock greater efficiency, productivity, and innovation, empowering them to stay competitive in today's dynamic market landscape. In this tutorial, we'll guide you step by step on how to easily download and install modules from the Odoo App Store.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
Accounting for Restricted Grants When and How To Record Properly
In this webinar, member learned how to stay in compliance with generally accepted accounting principles (GAAP) for restricted grants.
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
How to Setup Default Value for a Field in Odoo 17
In Odoo, we can set a default value for a field during the creation of a record for a model. We have many methods in odoo for setting a default value to the field.
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER JEE PYQ
NIPER JEE QUESTIONS
MOST FREQUENTLY ASK QUESTIONS
NIPER MEMORY BASED QUWSTIONS
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzpCHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfHow to Manage Reception Report in Odoo 17
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
Internet resources for social science
How to Fix [Errno 98] address already in use
This slide will represent the cause of the error “[Errno 98] address already in use” and the troubleshooting steps to resolve this error in Odoo.
Recently uploaded (20)
How to Download & Install Module From the Odoo App Store in Odoo 17
How to Download & Install Module From the Odoo App Store in Odoo 17
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
Accounting for Restricted Grants When and How To Record Properly
Accounting for Restricted Grants When and How To Record Properly
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
NIPER 2024 MEMORY BASED QUESTIONS.ANSWERS TO NIPER 2024 QUESTIONS.NIPER JEE 2...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
220711130088 Sumi Basak Virtual University EPC 3.pptx
220711130088 Sumi Basak Virtual University EPC 3.pptx
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
VISITOR SAFETY INDUCTION Form # HSEQ - VSI Rev 2 - S.docx
- 1. VISITOR’S SAFETY INDUCTION PROJECT NAME:………………………………….. Page 1 of 1 Form # HSEQ-VSI (Rev 2 - Mar 23) YOUR SAFETY IS OUR UTMOST PRIORITY Take a minute from your precious time and go through this brochure thoroughly. If there is anything unclear, please ask our HSE staff member without any hesitation. All visitors are required to follow the lead of security at the site entrance for parking. Max. Speed limit of 20 km/h should be maintained. Site plants and pedestrian have a right of way over your vehicle. Sign the visitor’s register at the main reception area in the office building and obtain a visitor’s card which should be put on all the time. Visitors are permitted to enter the construction site areas only if they are escorted by our HSE staff member after project management approval. SAFETY INSTRUCTIONS Smoking is prohibited in offices, and construction site areas except in the designated areas outside. Mandatory PPEs (Safety helmet, visibility vest, & safety shoes) are Obligatory at construction site area. Use only designated safe pedestrian walk routes. Observe and firmly follow the Safety and Advisory signs. Follow escorted HSE staff’s safety instructions and cautions during site visit. EMERGENCY INSTRUCTIONS In case of emergency situation or emergency alarm, please remain calm and follow the instructions of the escorted HSE staff and proceeds to the Assembly/muster points using safest direct emergency routes and exits. Stay at assembly/muster point until the visitor’s roll is called and you are noted as being present. Your full cooperation is requested with our staff to ensure your safety during emergency situation as they are all trained to deal with site emergencies. Call First Aid room and HSE In charge if you spot any accident or injury. EMERGENCY NUMBERS: Police: …………………………………………………………………………………. Ambulance: …………………………………………………………………………. Civil Defense: ………………………………………………………………………. First aid Room: ……………………………………………………………………. Project Manager: ………………………………………………………………… HSE: …………………………………………………………………………………….. FIRST AID ROOM IS LOCATED AT ………………………………………………………………………………………… ASSEMBLY POINTS ARE LOCATED AT 1. …………………………………………………………………………………….. 2. …………………………………………………………………………………….. CAUTION! Beware of lifting activities and overhead suspended loads. Beware of electrocution hazards. Beware of pinch point hazards (nails, sharp edges etc.) DECLARATION: I have read and understood all above instructions:- Visitor’s Name: ……………………………………………………… Company: ……………………………………………………………… Signature: …………………………………………………………….. Date: …………………………………………………………………….. SAFETY IS EVERYBODY’S RESPONSIBILITY!