This compressor works on the principle of centrifugal action. It finds wide variety of applications in engineering field. It is available in market from low to high capacities.
This compressor works on the principle of centrifugal action. It finds wide variety of applications in engineering field. It is available in market from low to high capacities.
Hydraulics is a branch of science which deals with hydraulic fluid. It is used in places where cleanliness is not a priority but requires huge power to perform tasks.
application:
1. Industrial: Plastic processing machineries, steel making and primary metal extraction applications, automated production lines, machine tool industries, paper industries, loaders, crushes, textile machineries, R & D equipment and robotic systems etc.
2 Mobile hydraulics: Tractors, irrigation system, earthmoving equipment, material handling equipment, commercial vehicles, tunnel boring equipment, rail equipment, building and construction machineries and drilling rigs etc.
3 Automobiles: It is used in the systems like breaks, shock absorbers, steering system, wind shield, lift and cleaning etc.
4 Marine applications: It mostly covers ocean going vessels, fishing boats and navel equipment.
5 Aerospace equipment: There are equipment and systems used for rudder control, landing gear, breaks, flight control and transmission etc. which are used in airplanes, rockets and spaceships.
Watch Video of this presentation on Link: https://youtu.be/xIGlZ3UvLdw
For notes/articles, Visit my blog (link is given below).
For Video, Visit our YouTube Channel (link is given below).
Any Suggestions/doubts/reactions, please leave in the comment box.
Follow Us on
YouTube: https://www.youtube.com/channel/UCVPftVoKZoIxVH_gh09bMkw/
Blog: https://e-gyaankosh.blogspot.com/
Facebook: https://www.facebook.com/egyaankosh/
Hydraulics is a branch of science which deals with hydraulic fluid. It is used in places where cleanliness is not a priority but requires huge power to perform tasks.
application:
1. Industrial: Plastic processing machineries, steel making and primary metal extraction applications, automated production lines, machine tool industries, paper industries, loaders, crushes, textile machineries, R & D equipment and robotic systems etc.
2 Mobile hydraulics: Tractors, irrigation system, earthmoving equipment, material handling equipment, commercial vehicles, tunnel boring equipment, rail equipment, building and construction machineries and drilling rigs etc.
3 Automobiles: It is used in the systems like breaks, shock absorbers, steering system, wind shield, lift and cleaning etc.
4 Marine applications: It mostly covers ocean going vessels, fishing boats and navel equipment.
5 Aerospace equipment: There are equipment and systems used for rudder control, landing gear, breaks, flight control and transmission etc. which are used in airplanes, rockets and spaceships.
Watch Video of this presentation on Link: https://youtu.be/xIGlZ3UvLdw
For notes/articles, Visit my blog (link is given below).
For Video, Visit our YouTube Channel (link is given below).
Any Suggestions/doubts/reactions, please leave in the comment box.
Follow Us on
YouTube: https://www.youtube.com/channel/UCVPftVoKZoIxVH_gh09bMkw/
Blog: https://e-gyaankosh.blogspot.com/
Facebook: https://www.facebook.com/egyaankosh/
Hydraulic Turbines-Classification,Impulse and Reaction Turbine, Layout of Hyd...Mechanicalstudents.com
Hydraulic turbines are machines which convert hydraulic energy into mechanical energy. If the machine transforms mechanical energy into hydraulic energy it is called a pump. Thus in turbines, fluid does work on the machine and machine produces power. but, the pump absorbs the power and work is done on the fluid.
For more information, visit https://mechanicalstudents.com/hydraulic-turbines-classification-impulse-and-reaction-turbine-layout-of-hydroelectric-power-plant/
A turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. The work produced by a turbine can be used for generating electrical power when combined with a generator.
Turbines are the hydraulic machines which convert hydraulic energy into mechanical energy.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
2. Syllabus of Turbomachines (SPPU)
Unit No. Name of the Topic No. of Lectures alloted
Unit – I Impact of Jet and Hydraulic
Turbines
Unit –II Steam Turbines
Unit –III Centrifugal Pumps
Unit –IV Rotary Compressors
3. Introduction to Turbo Machinery
What is Turbomachines?
A turbomachine is basically a Machine
in which energy interaction between
the fluid and rotor takes place.
The rotating wheel is called a rotor /
runner / impeller.
The fluid medium can be gas / steam /
water / air
Energy transfer takes place either
Turbine rotor from rotor to fluid, or
from fluid to rotor.
4. Turbomachine - Definition
A turbo machine is a device in which energy transfer
occurs between a flowing fluid and rotating element due
to dynamic action. This results in change of pressure and
momentum of the fluid.
The interaction between the fluid and the turbomachine
blades also results in fluid dynamic lift.
6. 2. Based on fluid flowing in turbo machine
1. Hydraulic Turbine
Ex- Petlon turbine, Kaplan Turbine, Fransis
Turbine.
2. Steam Turbine
Ex- Parsons Turbine, De-Laval Turbine, Curtis
Turbine
3. Gas Turbines
Turbomachine – Classifications
7. 3. Based on direction of flow through the impeller
with reference to the axis of shaft rotation
1. Tangential flow –
Ex-Pelton water turbine
2. Radial flow –
Ex-Centrifugal pump or compressor, Fransis Turbine
3. Axial flow –
Ex- Axial pump, compressor or turbine, Kaplan
Turbine
Turbomachine – Classifications
8. Turbomachine – Classification
1.Impulse Turbine –
Ex-Pelton water turbine
2. Reaction Turbine–
Ex-Fransis Turbine, Kaplan Turbine
4. Based on condition of fluid in turbo
machine
9. Turbomachine – Classification
1. Horizontal shaft Turbine –
Ex-Steam turbine
2. Vertical shaft Turbine–
Ex-Kaplan Turbine
3. Inclined shaft Turbine–
Ex-Modern bulb micro
5. Based on position of rotating shaft
10. Comparison between Turbo machines and positive displacement machines
Turbo machines Positive displacement machines
1. It convert the fluid energy into mechanical
energy or vice versa by the dynamic action
(change in momentum) between the fluid and
the rotor.
1. It convert the fluid energy into
mechanical energy or vice versa by the
dynamic action by positive displacement
action of the fluid.
2. They operate at high speed 2. The operate at low speed
3. Due to rotary motion, Vibration problems
are less.
3. High vibration problems due to positive
displacement motion.
4. Simple in design
4. Complex in design
5. Efficiency is less 5. Efficiency is comparatively high
Eg- Hydraulic turbines, Gas turbines, Steam turbines etc. Eg- I.C engines, Reciprocating air compressor,etc.