This document discusses the development of smart textiles for use in sports to help address athletes' health issues. It proposes implementing sensors in a smart jersey to detect respiratory problems, muscle strain, dehydration, and overheating. Sensors for respiratory monitoring and muscle strain would use capacitive sensing and conductive fabrics respectively. A skin sensor using a flexible electrode could monitor hydration levels. An internal sensor would measure body temperature. The smart jersey would help athletes identify health issues early and take preventative actions to avoid injury and improve performance.
In this day and age there is an expanding need to make artificial arms for various cruel circumstances where human communication is troublesome or incomprehensible. They may include taking readings from a dynamic spring of gushing lava to diffusing a bomb. This paper presents a study on dynamic analysis of multi degree freedom of a bionic arm that is designed in CATIA V5. The prototype is converted into standard for the exchange of product .stp file and is imported in the ANSYS software for the calculation of parameters such as maximum and minimum of deformations, stresses, strains, velocities, and acceleration. The analysis is done with giving different materials for the better optimization of the parameters such as reduced weight, less friction, and more strength. The fingers are revolute pairs that are free to rotate about certain degrees this motion is given by actuators. The arm can be improvised by using sensors, actuators and mechatronic chips so that it mimics the artificial hand. Mr. M. Sreedhar | Mrs. P. Varalakshmi | R. Naveen | S. Bharath Kumar | T. Akhil Reddy ""Dynamic Analysis of Bionic ARM"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23237.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23237/dynamic-analysis-of-bionic-arm/mr-m-sreedhar
Smart health monitoring system using IoT based smart fitness mirrorTELKOMNIKA JOURNAL
The smart fitness mirror proposed in this researchaims to provide the users with a platform to monitor their health and fitness status on a daily basis. The system employs a number of sensors to monitor the body mass index (BMI) and amount of body fat present in the user’s body. A weight scale consisting of four load sensors has been implemented to obtain the weight of the user whereas an ultrasonic sensor has been used to measure the height of the user. In addition, four electrode plates have been implemented on the foot weight scale to infuse a small amount of electric current (1mA) for BIA (bioelectrical impedance analysis) to estimate the amount of body fat percentage, lean body mass and total body water. An IR temperature sensor has been implemented in the research to measure the temperature of the user’s body from the forehead. Tests conducted on the system illustrate that it is able to accurately compute the body mass index and perform a bioelectrical impedance analysis on the user. The system is able to achieve a 92.5 % and 93.7 % accuracy in determining the body mass index and body fat percentage respectively. An accuracy of 95.3 % was observed in the determination of the body temperature.
Ergonomics and occupational health in construction worker certification in in...eSAT Journals
Abstract In order to improve the professionalism of the construction workforce, Indonesian government through the Institute of Development Construction Services perform certification for experts named Competency Standards Expert (CSE) and skilled labor named Competency Standards Skilled (CSS) which are based on the Indonesian National Competence Standard (INCS). There are three competencies listed in INCS, namely general competency, core competencies, and competence option. In general competency containing the Occupational Health and Safety (OHS), ergonomics is not included as an element of competence that must be possessed, eventhough ergonomics is closely related to occupational health. In this study the aspects of ergonomics is examined in the form of muscle pain (musculoskeletal disorder), and remedial efforts are made by improving the work method to met the principle of ergonomics to reduce the occurrence of such complaints. The results showed that ergonomic working methods can reduce muscle pain complaints on the work of masonry, plaster, ceramic, and painting significantly.
Keywords: competence certification, INCS, ergonomics, muscle pain complaints.
Pneumatic stretcher chair device for paralysed patientseSAT Journals
Abstract In this age of nuclear families, the smaller number of available caregivers for paralyzed patients is a major problem. The shifting of such patients to a wheelchair is a delicate process and in most of the instances, two or more caregivers are required. This paper presents the design and fabrication of pneumatically powered stretcher-chair convertible device with movable support segments in an attempt to help such patients and caregivers. This helps the caregiver avoid heavy lifting situations that put their back at risk of injury. The caregiver can merely shift the patient from a bed on to the device while the device is in the form of a stretcher. Then the device can be converted into a chair and the wheels of the device provide mobility like a wheelchair. Most paralyzed patients develop pressure ulcers which add to their misery causing immense pain and irritation. Support surface pressure or the reaction pressure of the surface on which the patient’s body is supported has been identified as a major cause of pressure ulcer formation. In order to address this scenario, an idea of alternating pressure support surface has been implemented. This mechanism relieves support surface pressure on the patient’s body thus preventing/ prolonging pressure ulcer formation. It also exposes the body to more air so that perspiration on the patient’s skin evaporates better. Further, this mechanism acts as a body/ muscle stimulating mechanism. The alternating pressure support surface is also actuated by pneumatic power and controlled by an electronic timing circuit.
Keywords: Paralysis, Pressure ulcers, Pneumatics, Stretcher-chair, alternating pressure surface
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
In this day and age there is an expanding need to make artificial arms for various cruel circumstances where human communication is troublesome or incomprehensible. They may include taking readings from a dynamic spring of gushing lava to diffusing a bomb. This paper presents a study on dynamic analysis of multi degree freedom of a bionic arm that is designed in CATIA V5. The prototype is converted into standard for the exchange of product .stp file and is imported in the ANSYS software for the calculation of parameters such as maximum and minimum of deformations, stresses, strains, velocities, and acceleration. The analysis is done with giving different materials for the better optimization of the parameters such as reduced weight, less friction, and more strength. The fingers are revolute pairs that are free to rotate about certain degrees this motion is given by actuators. The arm can be improvised by using sensors, actuators and mechatronic chips so that it mimics the artificial hand. Mr. M. Sreedhar | Mrs. P. Varalakshmi | R. Naveen | S. Bharath Kumar | T. Akhil Reddy ""Dynamic Analysis of Bionic ARM"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23237.pdf
Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/23237/dynamic-analysis-of-bionic-arm/mr-m-sreedhar
Smart health monitoring system using IoT based smart fitness mirrorTELKOMNIKA JOURNAL
The smart fitness mirror proposed in this researchaims to provide the users with a platform to monitor their health and fitness status on a daily basis. The system employs a number of sensors to monitor the body mass index (BMI) and amount of body fat present in the user’s body. A weight scale consisting of four load sensors has been implemented to obtain the weight of the user whereas an ultrasonic sensor has been used to measure the height of the user. In addition, four electrode plates have been implemented on the foot weight scale to infuse a small amount of electric current (1mA) for BIA (bioelectrical impedance analysis) to estimate the amount of body fat percentage, lean body mass and total body water. An IR temperature sensor has been implemented in the research to measure the temperature of the user’s body from the forehead. Tests conducted on the system illustrate that it is able to accurately compute the body mass index and perform a bioelectrical impedance analysis on the user. The system is able to achieve a 92.5 % and 93.7 % accuracy in determining the body mass index and body fat percentage respectively. An accuracy of 95.3 % was observed in the determination of the body temperature.
Ergonomics and occupational health in construction worker certification in in...eSAT Journals
Abstract In order to improve the professionalism of the construction workforce, Indonesian government through the Institute of Development Construction Services perform certification for experts named Competency Standards Expert (CSE) and skilled labor named Competency Standards Skilled (CSS) which are based on the Indonesian National Competence Standard (INCS). There are three competencies listed in INCS, namely general competency, core competencies, and competence option. In general competency containing the Occupational Health and Safety (OHS), ergonomics is not included as an element of competence that must be possessed, eventhough ergonomics is closely related to occupational health. In this study the aspects of ergonomics is examined in the form of muscle pain (musculoskeletal disorder), and remedial efforts are made by improving the work method to met the principle of ergonomics to reduce the occurrence of such complaints. The results showed that ergonomic working methods can reduce muscle pain complaints on the work of masonry, plaster, ceramic, and painting significantly.
Keywords: competence certification, INCS, ergonomics, muscle pain complaints.
Pneumatic stretcher chair device for paralysed patientseSAT Journals
Abstract In this age of nuclear families, the smaller number of available caregivers for paralyzed patients is a major problem. The shifting of such patients to a wheelchair is a delicate process and in most of the instances, two or more caregivers are required. This paper presents the design and fabrication of pneumatically powered stretcher-chair convertible device with movable support segments in an attempt to help such patients and caregivers. This helps the caregiver avoid heavy lifting situations that put their back at risk of injury. The caregiver can merely shift the patient from a bed on to the device while the device is in the form of a stretcher. Then the device can be converted into a chair and the wheels of the device provide mobility like a wheelchair. Most paralyzed patients develop pressure ulcers which add to their misery causing immense pain and irritation. Support surface pressure or the reaction pressure of the surface on which the patient’s body is supported has been identified as a major cause of pressure ulcer formation. In order to address this scenario, an idea of alternating pressure support surface has been implemented. This mechanism relieves support surface pressure on the patient’s body thus preventing/ prolonging pressure ulcer formation. It also exposes the body to more air so that perspiration on the patient’s skin evaporates better. Further, this mechanism acts as a body/ muscle stimulating mechanism. The alternating pressure support surface is also actuated by pneumatic power and controlled by an electronic timing circuit.
Keywords: Paralysis, Pressure ulcers, Pneumatics, Stretcher-chair, alternating pressure surface
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Smart Textile
Smart textiles are defined as textiles that can sense and react via an active control mechanism to environmental conditions or stimuli, such as mechanical, thermal, magnetic, chemical, electrical, or other sources. They are able to sense and respond to external conditions (stimuli) in a predetermined way.
Electronics in medical sciences has been an emerging field of study and has evolved a lot. Bio electronics is a somewhat new branch that can provide more effective and convenient solutions by revolutionizing the scope of medicine forever. It involves electronic devices that can be consumed furthermore after going inside the body, capable of assisting in various procedures like a diagnosis, surgical assistance, etc. This paper focusses on delivering the fundamental concept of edible electronics, how is it helpful, its extent of application, and its challenges. Anshika Gupta "Bioelectronics - The Revolutionary Concept" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33022.pdf Paper Url :https://www.ijtsrd.com/biological-science/other/33022/bioelectronics--the-revolutionary-concept/anshika-gupta
Smart clothing is on tremendous high demand for the various safety purposes, for heath in hazardous environment, for improvising business performance, appearance and in entertainment. With the wearable devices like smart jackets and other accessories it is possible to collect and detect the signals for the organizations to respond the incidents in many different ways.Smart Clothing joins in materials and remote sensor and organizes with regards to human body observing with measurable strategies for the information and treatment. Thejashwini. K. S | Sayeeqa Anjum | Sowmya K. N | C R Manjunath"IoT Based Smart Clothing" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018, URL: http://www.ijtsrd.com/papers/ijtsrd13055.pdf http://www.ijtsrd.com/engineering/computer-engineering/13055/iot-based-smart-clothing/thejashwini-k-s
Smart Textile
Smart textiles are defined as textiles that can sense and react via an active control mechanism to environmental conditions or stimuli, such as mechanical, thermal, magnetic, chemical, electrical, or other sources. They are able to sense and respond to external conditions (stimuli) in a predetermined way.
Electronics in medical sciences has been an emerging field of study and has evolved a lot. Bio electronics is a somewhat new branch that can provide more effective and convenient solutions by revolutionizing the scope of medicine forever. It involves electronic devices that can be consumed furthermore after going inside the body, capable of assisting in various procedures like a diagnosis, surgical assistance, etc. This paper focusses on delivering the fundamental concept of edible electronics, how is it helpful, its extent of application, and its challenges. Anshika Gupta "Bioelectronics - The Revolutionary Concept" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33022.pdf Paper Url :https://www.ijtsrd.com/biological-science/other/33022/bioelectronics--the-revolutionary-concept/anshika-gupta
Smart clothing is on tremendous high demand for the various safety purposes, for heath in hazardous environment, for improvising business performance, appearance and in entertainment. With the wearable devices like smart jackets and other accessories it is possible to collect and detect the signals for the organizations to respond the incidents in many different ways.Smart Clothing joins in materials and remote sensor and organizes with regards to human body observing with measurable strategies for the information and treatment. Thejashwini. K. S | Sayeeqa Anjum | Sowmya K. N | C R Manjunath"IoT Based Smart Clothing" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-4 , June 2018, URL: http://www.ijtsrd.com/papers/ijtsrd13055.pdf http://www.ijtsrd.com/engineering/computer-engineering/13055/iot-based-smart-clothing/thejashwini-k-s
An Equipped Sensorized Glove with Bent Sensor for Measuring Finger Flexion Selvi K – PG Scholar,
Embedded System and Technologies,
Rajeswari S – Assistant Professor,
Department of ECE,
PSN college of Engineering and Technology, Tirunelveli, India
Caring jacket: health monitoring jacket integrated with the internet of thing...CSITiaesprime
One of the policies that have been made by the World Health Organization (WHO) and the Indonesian government during this COVID-19 pandemic, is to use an oximeter for self-isolation patients. The oximeter is used to monitor the patient if happy hypoxia which is a silent killer, happens to the patient. To maintain body endurance, exercise is needed by COVID-19 patients, but doing too much exercise can also cause decreased immunity. That’s why fatigue level and exercise intensity need to be monitored. When exercising, social distancing protocol should be also reminded because can lower COVID-19 spreading up to 13.6%. To solve this issue, the Caring Jacket is proposed which is a health monitoring jacket integrated with an IoT system. This jacket is equipped with some sensors and the global positioning system (GPS) for tracking. The data from the test showed the temperature reading accuracy is up to 99.38%, the oxygen rate up to 97.31%, the beats per minute (BPM) sensor up to 97.82%, and the precision of all sensors is 97.00% compared with a calibrated device.
Application of Big Data Analysis and Internet of Things to the Intelligent Ac...gerogepatton
With the advent and rising usage of Internet of Things (IoT) eco-systems, there is a consequent, parallel
rise in opportunities where technology can find its place to improve a number of human conditions.
However, this is nothing new - we have been perfecting the usage of tools to aid our daily living
throughout history. The true evolution lies in the interaction between us and the tools we create. Tools
are now smart devices, yielding an opportunity where human-device interaction is giving us the very
knowledge on how to improve that particular synthesis. From improving our fitness to detecting
bradycardia and response of traumatic brain injury patient, we have come to a point where we are able
to gain actionable insight into a lot of aspects of our health and condition. This creates a certain
autonomy in understanding the unique make-up of every single person, in addition to yielding
information that can be used by health practitioners to help in diagnosis, determination of medical
approach and right recovery and follow-up methods. All of this supported by two major factors: IoT
platforms and Big Data Analysis (BDA).
This paper takes a deep dive into exemplary set-up of IoT platform and BDA framework necessary to
support the improvement of human condition. Our SmartLeg prosthetic device integrates advanced
prosthetic and robotic technology with the state-of-the-art machine learning algorithms capable of
adapting the working of the prosthesis to the optimal gait and power consumption patterns, which
provide means to customize the device to a particular user.
APPLICATION OF BIG DATA ANALYSIS AND INTERNET OF THINGS TO THE INTELLIGENT AC...ijaia
With the advent and rising usage of Internet of Things (IoT) eco-systems, there is a consequent, parallel rise in opportunities where technology can find its place to improve a number of human conditions. However, this is nothing new - we have been perfecting the usage of tools to aid our daily living throughout history. The true evolution lies in the interaction between us and the tools we create. Tools are now smart devices, yielding an opportunity where human-device interaction is giving us the very knowledge on how to improve that particular synthesis. From improving our fitness to detecting bradycardia and response of traumatic brain injury patient, we have come to a point where we are able to gain actionable insight into a lot of aspects of our health and condition. This creates a certain autonomy in understanding the unique make-up of every single person, in addition to yielding information that can be used by health practitioners to help in diagnosis, determination of medical approach and right recovery and follow-up methods. All of this supported by two major factors: IoT platforms and Big Data Analysis (BDA).
This paper takes a deep dive into exemplary set-up of IoT platform and BDA framework necessary to support the improvement of human condition. Our SmartLeg prosthetic device integrates advanced prosthetic and robotic technology with the state-of-the-art machine learning algorithms capable of adapting the working of the prosthesis to the optimal gait and power consumption patterns, which provide means to customize the device to a particular user.
Similar to Study of Smart Textile in Sports and Designing a Smart Jersey for Athletes Health Issue (20)
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.