Steps in constructing an orthographic drawing
•Download as PPTX, PDF•
1 like•8,885 views
This document provides instructions for how to construct multi-view orthographic drawings by plotting principal dimensions on axes, constructing initial boxes for top and front views, using a 45 degree triangle to draw a miter line and project points to form the right side view box, plotting sub-dimensions, sketching details by projecting markings, darkening final edges and adding hidden lines if needed, and labeling the completed drawing.
Report
Share
Report
Share
Recommended
Steps in constructing an isometric drawing
The document outlines the 7 steps to construct an isometric drawing: 1) Draw the three axes at 30 degrees, 2) Plot the principal dimensions of Height, Width, and Depth, 3) Draw the outer lines of the object lightly, 4) Add the internal details by analyzing points, 5) Check the accuracy, 6) Trace visible edges with darker lines, 7) Label the drawing. It also lists 4 key points to remember like keeping axes equally spaced at 120 degrees and using light lines initially.
Isometric drawing
This document discusses the concepts and techniques for creating isometric drawings. Isometric drawings show a 3D object from 3 views - top, front, and side - with all lines drawn at a 30 degree angle from the horizontal. There are different methods for constructing isometric drawings depending on the shape of the object, such as the box method for rectangular objects or frame method for objects with vertices. Circles and curves can also be drawn in isometric views using techniques like locating the center of an ellipse or drawing along coordinates.
Oblique drawing
An oblique drawing shows one view of an object without distortion by drawing receding surfaces at an angle. It is similar to an isometric drawing except two axes are perpendicular in an oblique drawing. There are three types of oblique drawings: cavalier oblique draws receding sides at true size, cabinet oblique scales them at half size, and general oblique uses two-thirds scale. To create an oblique drawing, one sets the axes, constructs guide boxes, transfers views, connects points to complete the object, then finalizes it by darkening lines and erasing extras.
Isometric and Orthographic Drawing Powerpoint.pptx
The document discusses orthographic and isometric drawings. It explains that orthographic drawings use multiple 2D views to represent a 3D object, including top, bottom, front, back, right and left views. Isometric drawings represent 3D objects at a skewed angle using 3 main rules: horizontal edges are drawn at 30 degrees, vertical edges are drawn vertically, and parallel edges appear parallel. The document provides examples of an isometric cube drawing and instructions for setting up a drawing board and techniques for drawing orthographic and isometric views, including using scales. It assigns two tasks: drawing a cube and smaller scaled cube with a cutout.
Pictorial Drawing
This document discusses different types of pictorial drawings including oblique, isometric, and perspective drawings. Oblique drawings can be cavalier or cabinet style and involve shortening receding lines at 45 degrees. Isometric drawings present a 3D object with all dimensions visible and undistorted using 3 sets of lines at 30 degree angles. Perspective drawings make objects appear smaller with distance using 1, 2, or 3 vanishing points to align lines. The document provides examples and steps for creating each type of pictorial drawing.
Orthographic Projection
Orthographic projections provide 2D views of an object that together accurately represent it. Common views are the front, top, and side. Objects are imagined inside a glass box and each face is projected onto a plane. Dimensions are drawn with thin continuous lines and indicate sizes. Drawings include title blocks with title, author, date, scale, and other information.
Lesson orthographic drawing
The document discusses orthographic projection drawings and their use in technical design. It covers the principles of orthographic projection including the six standard views, use of visible vs hidden lines, and how to construct a multi-view orthographic drawing using front, top, and side views aligned using proper spacing guidelines. Examples are provided of orthographic views for an object contained within a glass box to demonstrate projecting different views.
Lesson 2 orthographic drawing - tdj3 m0
The document discusses orthographic projection drawings which are a collection of 2D drawings that accurately represent an object. It describes the six principle views used in orthographic projection including front, right side, top, bottom, left side, and rear views. The document also explains rules for orthographic drawings including choosing a front view and common view combinations. Additionally, it outlines the glass box technique, different line types, steps for creating orthographic projection drawings, and guidelines for spacing views.
Recommended
Steps in constructing an isometric drawing
The document outlines the 7 steps to construct an isometric drawing: 1) Draw the three axes at 30 degrees, 2) Plot the principal dimensions of Height, Width, and Depth, 3) Draw the outer lines of the object lightly, 4) Add the internal details by analyzing points, 5) Check the accuracy, 6) Trace visible edges with darker lines, 7) Label the drawing. It also lists 4 key points to remember like keeping axes equally spaced at 120 degrees and using light lines initially.
Isometric drawing
This document discusses the concepts and techniques for creating isometric drawings. Isometric drawings show a 3D object from 3 views - top, front, and side - with all lines drawn at a 30 degree angle from the horizontal. There are different methods for constructing isometric drawings depending on the shape of the object, such as the box method for rectangular objects or frame method for objects with vertices. Circles and curves can also be drawn in isometric views using techniques like locating the center of an ellipse or drawing along coordinates.
Oblique drawing
An oblique drawing shows one view of an object without distortion by drawing receding surfaces at an angle. It is similar to an isometric drawing except two axes are perpendicular in an oblique drawing. There are three types of oblique drawings: cavalier oblique draws receding sides at true size, cabinet oblique scales them at half size, and general oblique uses two-thirds scale. To create an oblique drawing, one sets the axes, constructs guide boxes, transfers views, connects points to complete the object, then finalizes it by darkening lines and erasing extras.
Isometric and Orthographic Drawing Powerpoint.pptx
The document discusses orthographic and isometric drawings. It explains that orthographic drawings use multiple 2D views to represent a 3D object, including top, bottom, front, back, right and left views. Isometric drawings represent 3D objects at a skewed angle using 3 main rules: horizontal edges are drawn at 30 degrees, vertical edges are drawn vertically, and parallel edges appear parallel. The document provides examples of an isometric cube drawing and instructions for setting up a drawing board and techniques for drawing orthographic and isometric views, including using scales. It assigns two tasks: drawing a cube and smaller scaled cube with a cutout.
Pictorial Drawing
This document discusses different types of pictorial drawings including oblique, isometric, and perspective drawings. Oblique drawings can be cavalier or cabinet style and involve shortening receding lines at 45 degrees. Isometric drawings present a 3D object with all dimensions visible and undistorted using 3 sets of lines at 30 degree angles. Perspective drawings make objects appear smaller with distance using 1, 2, or 3 vanishing points to align lines. The document provides examples and steps for creating each type of pictorial drawing.
Orthographic Projection
Orthographic projections provide 2D views of an object that together accurately represent it. Common views are the front, top, and side. Objects are imagined inside a glass box and each face is projected onto a plane. Dimensions are drawn with thin continuous lines and indicate sizes. Drawings include title blocks with title, author, date, scale, and other information.
Lesson orthographic drawing
The document discusses orthographic projection drawings and their use in technical design. It covers the principles of orthographic projection including the six standard views, use of visible vs hidden lines, and how to construct a multi-view orthographic drawing using front, top, and side views aligned using proper spacing guidelines. Examples are provided of orthographic views for an object contained within a glass box to demonstrate projecting different views.
Lesson 2 orthographic drawing - tdj3 m0
The document discusses orthographic projection drawings which are a collection of 2D drawings that accurately represent an object. It describes the six principle views used in orthographic projection including front, right side, top, bottom, left side, and rear views. The document also explains rules for orthographic drawings including choosing a front view and common view combinations. Additionally, it outlines the glass box technique, different line types, steps for creating orthographic projection drawings, and guidelines for spacing views.
TLE 9 (Technical Drafting) - Lettering
Lettering is the process of forming letters, numerals, and other characters used in technical drawing. There are three main methods of lettering: freehand lettering done without tools, mechanical lettering done with tools like guides and templates, and modern drawing done with computer-aided software. The dimensions of letters are defined by their nominal size based on the height of uppercase letters, their center line which runs through the middle of each line element, and their lettering angle which can be vertical or inclined up to 75 degrees.
Orthographic Projections
Orthographic projection is a technique where the object is projected onto planes perpendicular to the lines of sight to create 2D views from the front, side, and top. It shows the object as it would look from those directions. The views are positioned according to first or third angle projection rules. Dimensions and other details are included to fully specify the geometry and tolerances of the object being designed. Standard drawing sheet sizes, scales, line types, dimensioning methods, and title block contents are used to create technical drawings based on orthographic projections.
Alphabet of lines Quiz
The document discusses different types of lines used in technical drawings including visible lines, hidden lines, and dimension lines. It asks the reader to identify lines shown in a figure based on their construction and application and provides a list of common line types used in technical drawings to select answers from.
Lesson 6_Prepare and Interpret Technical Drawing (LO1)
This document provides an overview of different techniques for technical drawing, including various types of lines and their meanings. It discusses the importance of line quality and differentiating line patterns. Specific line types are defined, such as object lines, construction lines, dimension lines, and more. Guidelines are presented for drawing straight lines, curves, letters, shapes, solids, orthographic views, isometric views, perspective views, and oblique projections. The document emphasizes using light construction lines and developing line confidence and subtlety.
Scaling
This document discusses mechanical drafting and scaling. It explains that scaling allows drawings to be made proportionally larger or smaller than the actual object using scale ratios. Common scale ratios discussed are 1:1 for full size, reduced scales from 1:10 to 1:500 to fit large objects on paper, and enlarged scales from 2:1 to 500:1 to show details of small objects. Guidelines are provided for dimensioning and maintaining angles when scaling drawings.
Drafting Tools and Materials
This document discusses various drafting materials and tools, including types of drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils, triangular scales, erasing shields, T-squares, triangles, compasses, dividers, and protractors. It provides details on the uses and functions of each tool, such as hard drawing pencils being used for accuracy and soft pencils being used for art work. Masking tape is used to fasten paper without damage, and different types of erasers are suited to removing marks or making corrections. T-squares are used for horizontal lines while triangles are used with T-squares for vertical lines. Compasses and dividers are used for drawing
TECHNICAL DRAFTING: ALPHABET OF LINES.pptx
The document discusses the alphabet of lines used in technical drawings. It defines 11 types of lines: 1) object or visible lines, 2) construction lines, 3) dimension lines, 4) hidden lines, 5) center lines, 6) extension lines, 7) cutting plane lines, 8) short and long break lines, 9) leader lines, 10) phantom lines, and 11) section lines. It provides examples of how different line types would be used to draw geometric shapes like a pyramid, circle, cube, and cylinder.
TLE 8 - TECHNICAL DRAFTING (INTERPRET TECHNICAL DRAWINGS AND PLANS)
This document provides an overview of technical drawings and plans. It discusses different types of drawings including working drawings, pictorial drawings, orthographic projections, assembly drawings, and detailed drawings. It also covers topics such as isometric, oblique, and perspective drawings. Steps for sketching an isometric box are outlined. The importance of technical drawings for construction projects and proposals is emphasized. Dimensioning rules for technical drawings are also reviewed.
Isometric drawings
This document provides information on isometric projections and isometric drawing techniques. It discusses how isometric projections allow three faces of an object to be viewed at once by pivoting the object 45 degrees. It also describes how isometric drawings are created using a "box construction" method where measurement lines are drawn at 30 degree angles to form an outline box for the object. The stages of isometric drawing are outlined as sketching the box, measuring details, and final layout. Methods for drawing non-isometric lines, circles, and rounded objects in isometric perspective are also summarized.
Orthographic projection exercises
The document contains instructions and examples for 14 exercises related to orthographic projection. The exercises include identifying views of objects from different angles, matching orthographic drawings to isometric or oblique views, sketching projections of objects, and drawing multi-view orthographic projections of components with dimensions. Solutions or spaces for solutions are provided for each exercise.
Oblique form 4
This document discusses oblique drawings and related concepts. It defines oblique lines as lines parallel to any oblique axis. It explains that objects not parallel to an oblique axis are non-oblique lines. Angles on object surfaces parallel to the front projection plane or receding plane are considered oblique angles. Circles parallel to the front projection plane appear at actual size, while on a receding plane they appear as ellipses. Arcs parallel to the projection plane show their true size. The document provides examples of constructing oblique drawings using the box method and exercises readers to redraw objects in cavalier and cabinet oblique drawings.
TLE 8 - TECHNICAL DRAFTING (ANALYZE SIGNS, SYMBOLS AND DATA)
The document discusses technical drafting and the importance of signs, symbols, and lines. It introduces the "alphabet of lines" used in technical drawings. There are 12 main line types that convey specific meanings, such as visible lines that outline objects, hidden lines for edges not visible, and cutting plane lines that indicate where a sectional view is shown. Recognizing the alphabet of lines is important because it allows designers to clearly depict the features of designed products using standardized graphical representations.
BASIC DRAFTING
This document provides an overview of technical drawing goals, materials, and techniques. It discusses the different types of drawings including orthographic, isometric, pictorial, axonometric, oblique, and perspective. Key aspects covered include types of lines used in drafting, lettering styles, guide lines, dimensions, and projection principles. The document serves as a basic introduction to technical drawing concepts, objectives, classifications, and methodologies.
Auxiliary views
Auxiliary views are orthographic projections used to show the true size and shape of inclined or oblique surfaces that cannot be fully represented in the standard three views. Auxiliary views are projected from principal views or other auxiliary views. They are used when features need to be shown at their true size for dimensioning or determining measurements like dihedral angles between surfaces. Multiple successive auxiliary views can be created by projecting additional views from existing auxiliary views.
Basic Technical Drawing and Sketching.ppt
The document discusses sketching techniques and concepts in engineering drawing. It defines key terms like vertex, edge, plane, and different types of surfaces and solids. It explains different types of sketches like single-view, oblique, and perspective sketches. It provides guidelines for techniques like drawing points, lines, circles, and shapes. It also discusses tools used for sketching and methods to draw different views like multiview, axonometric, and perspective drawings.
Perspective drawing techniques
This document provides an overview of perspective drawing techniques. It defines perspective as a method of representing three-dimensional objects on a two-dimensional surface in a way that appears realistic. The key elements of perspective include the observer's eye, the object, and the plane of projection. There are three main types of perspective: one-point, two-point, and three-point. One-point perspective involves lines converging to a single vanishing point and is illustrated through examples and step-by-step instructions for drawing a room.
Drafting no. 1
This document defines orthographic drawing and its importance in technical and engineering fields. It explains that orthographic drawing uses multiple views to represent the exact shape and size of an object through lines without shading. It then details the "alphabet of lines" which establishes the different line types used in technical drawings, such as visible, hidden, center, dimension, and leader lines, and defines the purpose of each line type. The document aims to teach the fundamentals and principles of orthographic drawing.
Draw 111- mechanical drawing and orthographic drawing
This document provides information and instructions for creating mechanical drawings using orthographic projection. It begins by describing how to properly set up drawing tools, materials, and work space. It then explains the different types of lines used in drawings based on weight, construction, and meaning. The document outlines the principles of orthographic projection including the three standard views of front, top, and side. It provides details on how to construct each view by using construction lines and projecting geometric features between the views based on set principles. Sample exercises are included to demonstrate constructing multi-view orthographic drawings from given sketches.
DLL-TECHNICAL-DRAFTING-EXPLORATORY.pdf
This daily lesson log from a teacher outlines a lesson on generating business ideas related to a career in technical drafting. The lesson objectives are to analyze the environment and market for technical drafting careers, identify common products and services, compare different offerings, and determine the profile of potential customers. Students will discuss real examples, compare concepts, and evaluate different situations through group activities to master the content.
Technical Drafting Module 4
This document provides an introduction to drafting structural layout and details using Computer-Aided Design (CAD) for a Grade 10 ICT technical drafting course. It outlines the learning objectives, which include drafting foundation plans and structural floors and roof framing plans. The document then provides a pre-assessment quiz to evaluate students' existing knowledge, and introduces the topics that will be covered in the module, such as drafting foundation plans, structural floors, and roof framing plans using CAD. Symbols, roof design considerations, and key technical terms are also introduced.
Orthographic drawing
This document provides instructions for creating an orthographic projection drawing. It explains that an orthographic projection shows the front, side, and plan/top views of an object all drawn to scale. The document guides the reader through each step, starting with the side view and adding the top and end views along with guide lines. It asks students to practice drawing an orthographic projection of a pen and includes questions to check their understanding of what orthographic projections show and the symbol used to represent this type of technical drawing.
Engineering graphics basics
Engineering Graphics provides graphical representations of objects using drawings. Drawings offer a better understanding of an object's shape, size, and appearance compared to verbal or written descriptions. Drawings are commonly used in engineering and other fields as an effective communication method. There are different types of drawings like orthographic projections, isometric drawings, and perspective drawings. Basic drawing tools include compasses, rulers, protractors, and mini drafters. Drawings must follow specific layouts and sheet formats depending on their purpose and scope.
More Related Content
What's hot
TLE 9 (Technical Drafting) - Lettering
Lettering is the process of forming letters, numerals, and other characters used in technical drawing. There are three main methods of lettering: freehand lettering done without tools, mechanical lettering done with tools like guides and templates, and modern drawing done with computer-aided software. The dimensions of letters are defined by their nominal size based on the height of uppercase letters, their center line which runs through the middle of each line element, and their lettering angle which can be vertical or inclined up to 75 degrees.
Orthographic Projections
Orthographic projection is a technique where the object is projected onto planes perpendicular to the lines of sight to create 2D views from the front, side, and top. It shows the object as it would look from those directions. The views are positioned according to first or third angle projection rules. Dimensions and other details are included to fully specify the geometry and tolerances of the object being designed. Standard drawing sheet sizes, scales, line types, dimensioning methods, and title block contents are used to create technical drawings based on orthographic projections.
Alphabet of lines Quiz
The document discusses different types of lines used in technical drawings including visible lines, hidden lines, and dimension lines. It asks the reader to identify lines shown in a figure based on their construction and application and provides a list of common line types used in technical drawings to select answers from.
Lesson 6_Prepare and Interpret Technical Drawing (LO1)
This document provides an overview of different techniques for technical drawing, including various types of lines and their meanings. It discusses the importance of line quality and differentiating line patterns. Specific line types are defined, such as object lines, construction lines, dimension lines, and more. Guidelines are presented for drawing straight lines, curves, letters, shapes, solids, orthographic views, isometric views, perspective views, and oblique projections. The document emphasizes using light construction lines and developing line confidence and subtlety.
Scaling
This document discusses mechanical drafting and scaling. It explains that scaling allows drawings to be made proportionally larger or smaller than the actual object using scale ratios. Common scale ratios discussed are 1:1 for full size, reduced scales from 1:10 to 1:500 to fit large objects on paper, and enlarged scales from 2:1 to 500:1 to show details of small objects. Guidelines are provided for dimensioning and maintaining angles when scaling drawings.
Drafting Tools and Materials
This document discusses various drafting materials and tools, including types of drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils, triangular scales, erasing shields, T-squares, triangles, compasses, dividers, and protractors. It provides details on the uses and functions of each tool, such as hard drawing pencils being used for accuracy and soft pencils being used for art work. Masking tape is used to fasten paper without damage, and different types of erasers are suited to removing marks or making corrections. T-squares are used for horizontal lines while triangles are used with T-squares for vertical lines. Compasses and dividers are used for drawing
TECHNICAL DRAFTING: ALPHABET OF LINES.pptx
The document discusses the alphabet of lines used in technical drawings. It defines 11 types of lines: 1) object or visible lines, 2) construction lines, 3) dimension lines, 4) hidden lines, 5) center lines, 6) extension lines, 7) cutting plane lines, 8) short and long break lines, 9) leader lines, 10) phantom lines, and 11) section lines. It provides examples of how different line types would be used to draw geometric shapes like a pyramid, circle, cube, and cylinder.
TLE 8 - TECHNICAL DRAFTING (INTERPRET TECHNICAL DRAWINGS AND PLANS)
This document provides an overview of technical drawings and plans. It discusses different types of drawings including working drawings, pictorial drawings, orthographic projections, assembly drawings, and detailed drawings. It also covers topics such as isometric, oblique, and perspective drawings. Steps for sketching an isometric box are outlined. The importance of technical drawings for construction projects and proposals is emphasized. Dimensioning rules for technical drawings are also reviewed.
Isometric drawings
This document provides information on isometric projections and isometric drawing techniques. It discusses how isometric projections allow three faces of an object to be viewed at once by pivoting the object 45 degrees. It also describes how isometric drawings are created using a "box construction" method where measurement lines are drawn at 30 degree angles to form an outline box for the object. The stages of isometric drawing are outlined as sketching the box, measuring details, and final layout. Methods for drawing non-isometric lines, circles, and rounded objects in isometric perspective are also summarized.
Orthographic projection exercises
The document contains instructions and examples for 14 exercises related to orthographic projection. The exercises include identifying views of objects from different angles, matching orthographic drawings to isometric or oblique views, sketching projections of objects, and drawing multi-view orthographic projections of components with dimensions. Solutions or spaces for solutions are provided for each exercise.
Oblique form 4
This document discusses oblique drawings and related concepts. It defines oblique lines as lines parallel to any oblique axis. It explains that objects not parallel to an oblique axis are non-oblique lines. Angles on object surfaces parallel to the front projection plane or receding plane are considered oblique angles. Circles parallel to the front projection plane appear at actual size, while on a receding plane they appear as ellipses. Arcs parallel to the projection plane show their true size. The document provides examples of constructing oblique drawings using the box method and exercises readers to redraw objects in cavalier and cabinet oblique drawings.
TLE 8 - TECHNICAL DRAFTING (ANALYZE SIGNS, SYMBOLS AND DATA)
The document discusses technical drafting and the importance of signs, symbols, and lines. It introduces the "alphabet of lines" used in technical drawings. There are 12 main line types that convey specific meanings, such as visible lines that outline objects, hidden lines for edges not visible, and cutting plane lines that indicate where a sectional view is shown. Recognizing the alphabet of lines is important because it allows designers to clearly depict the features of designed products using standardized graphical representations.
BASIC DRAFTING
This document provides an overview of technical drawing goals, materials, and techniques. It discusses the different types of drawings including orthographic, isometric, pictorial, axonometric, oblique, and perspective. Key aspects covered include types of lines used in drafting, lettering styles, guide lines, dimensions, and projection principles. The document serves as a basic introduction to technical drawing concepts, objectives, classifications, and methodologies.
Auxiliary views
Auxiliary views are orthographic projections used to show the true size and shape of inclined or oblique surfaces that cannot be fully represented in the standard three views. Auxiliary views are projected from principal views or other auxiliary views. They are used when features need to be shown at their true size for dimensioning or determining measurements like dihedral angles between surfaces. Multiple successive auxiliary views can be created by projecting additional views from existing auxiliary views.
Basic Technical Drawing and Sketching.ppt
The document discusses sketching techniques and concepts in engineering drawing. It defines key terms like vertex, edge, plane, and different types of surfaces and solids. It explains different types of sketches like single-view, oblique, and perspective sketches. It provides guidelines for techniques like drawing points, lines, circles, and shapes. It also discusses tools used for sketching and methods to draw different views like multiview, axonometric, and perspective drawings.
Perspective drawing techniques
This document provides an overview of perspective drawing techniques. It defines perspective as a method of representing three-dimensional objects on a two-dimensional surface in a way that appears realistic. The key elements of perspective include the observer's eye, the object, and the plane of projection. There are three main types of perspective: one-point, two-point, and three-point. One-point perspective involves lines converging to a single vanishing point and is illustrated through examples and step-by-step instructions for drawing a room.
Drafting no. 1
This document defines orthographic drawing and its importance in technical and engineering fields. It explains that orthographic drawing uses multiple views to represent the exact shape and size of an object through lines without shading. It then details the "alphabet of lines" which establishes the different line types used in technical drawings, such as visible, hidden, center, dimension, and leader lines, and defines the purpose of each line type. The document aims to teach the fundamentals and principles of orthographic drawing.
Draw 111- mechanical drawing and orthographic drawing
This document provides information and instructions for creating mechanical drawings using orthographic projection. It begins by describing how to properly set up drawing tools, materials, and work space. It then explains the different types of lines used in drawings based on weight, construction, and meaning. The document outlines the principles of orthographic projection including the three standard views of front, top, and side. It provides details on how to construct each view by using construction lines and projecting geometric features between the views based on set principles. Sample exercises are included to demonstrate constructing multi-view orthographic drawings from given sketches.
DLL-TECHNICAL-DRAFTING-EXPLORATORY.pdf
This daily lesson log from a teacher outlines a lesson on generating business ideas related to a career in technical drafting. The lesson objectives are to analyze the environment and market for technical drafting careers, identify common products and services, compare different offerings, and determine the profile of potential customers. Students will discuss real examples, compare concepts, and evaluate different situations through group activities to master the content.
Technical Drafting Module 4
This document provides an introduction to drafting structural layout and details using Computer-Aided Design (CAD) for a Grade 10 ICT technical drafting course. It outlines the learning objectives, which include drafting foundation plans and structural floors and roof framing plans. The document then provides a pre-assessment quiz to evaluate students' existing knowledge, and introduces the topics that will be covered in the module, such as drafting foundation plans, structural floors, and roof framing plans using CAD. Symbols, roof design considerations, and key technical terms are also introduced.
What's hot (20)
Lesson 6_Prepare and Interpret Technical Drawing (LO1)
Lesson 6_Prepare and Interpret Technical Drawing (LO1)
TLE 8 - TECHNICAL DRAFTING (INTERPRET TECHNICAL DRAWINGS AND PLANS)
TLE 8 - TECHNICAL DRAFTING (INTERPRET TECHNICAL DRAWINGS AND PLANS)
TLE 8 - TECHNICAL DRAFTING (ANALYZE SIGNS, SYMBOLS AND DATA)
TLE 8 - TECHNICAL DRAFTING (ANALYZE SIGNS, SYMBOLS AND DATA)
Draw 111- mechanical drawing and orthographic drawing
Draw 111- mechanical drawing and orthographic drawing
Viewers also liked
Orthographic drawing
This document provides instructions for creating an orthographic projection drawing. It explains that an orthographic projection shows the front, side, and plan/top views of an object all drawn to scale. The document guides the reader through each step, starting with the side view and adding the top and end views along with guide lines. It asks students to practice drawing an orthographic projection of a pen and includes questions to check their understanding of what orthographic projections show and the symbol used to represent this type of technical drawing.
Engineering graphics basics
Engineering Graphics provides graphical representations of objects using drawings. Drawings offer a better understanding of an object's shape, size, and appearance compared to verbal or written descriptions. Drawings are commonly used in engineering and other fields as an effective communication method. There are different types of drawings like orthographic projections, isometric drawings, and perspective drawings. Basic drawing tools include compasses, rulers, protractors, and mini drafters. Drawings must follow specific layouts and sheet formats depending on their purpose and scope.
2.1.a line conventions
The document discusses various line conventions used in technical drawings to develop and communicate geometric information. It describes line types such as construction lines, object lines, hidden lines, center lines, section lines, and dimension lines; and indicates how they are drawn and what purpose each serves. Guidelines are provided for using the appropriate line conventions and precedence when multiple line types overlap in a complex sketch.
Pictorial Drawings
The document discusses isometric projections and oblique projections. Isometric projections show an object with all vertical lines remaining vertical but horizontal lines drawn at a 30 degree angle. Oblique projections show depth through lines drawn at 45 degree angles, with cavalier drawings showing full scale depth, cabinet drawings at half scale, and general oblique drawings using any reasonable scale between half and full.
Lecture 15 ME 176 7 Root Locus Technique
The document discusses root locus analysis, a technique for analyzing the stability and transient response of control systems. It provides rules for sketching root loci, including that branches represent closed-loop poles and the locus is symmetric about the real axis. The document also describes refining the root locus sketch by finding the imaginary axis crossing, angles of departure and arrival, and approximating higher-order systems as second-order. An example problem is given to apply these techniques.
Powerpoint dimensioning
The document discusses dimensioning in technical drawing. It defines dimensions as numeric values that define the size, location, or orientation of an object. Dimensions communicate measurements and are used when details of an object are needed. There are different types of dimensions, including linear, radius, aligned, parallel, angular, and combined. The document outlines rules for proper dimensioning, such as keeping dimensions clear of objects and each other and using the correct line types and symbols.
ME 312 Mechanical Machine Design [Screws, Bolts, Nuts]
ME 312 Mechanical Machine Design is the flagship course of the mechanical engineering department at DHA Suffa University. This lecture is about mechanical fasteners and non-permanent joints. The course is offered every fall by Dr. Bilal A. Siddiqui.
Powerpoint first angle projection
The document discusses first angle projection as a method of orthographic projection. First angle projection represents a 3D object with 2D drawings, including a front elevation, side elevations, and plan view. It aims to provide a precise detailed drawing of an object using these 2D orthographic views. Key rules for first angle projection include showing the front view with the most detail and placing the end view on the right or left side depending on the viewing perspective.
ME 312 Mechanical Machine Design - Introduction [Week 1]
ME 312 Mechanical Machine Design is the flagship course of the mechanical engineering department at DHA Suffa University. This is an introductory lecture. The course is offered every fall by Dr. Bilal A. Siddiqui.
Chapter 8 Root Locus Techniques
The document discusses root locus techniques for analyzing control systems. It begins with an overview and objectives of root locus analysis. It then defines the root locus and describes how to sketch a root locus by determining the starting and ending points, branches, symmetry, behavior at infinity, and real axis segments. The document provides examples of using properties of root loci to find breakaway and break-in points, asymptotes, and the frequency and gain at imaginary axis crossings.
Engineering Graphics-basics
This document provides an overview of engineering graphics and technical drawing basics. It discusses different types of drawings, orthographic projections, scales, drawing tools like compasses and mini drafters, layout of drawing sheets, title blocks, and guidelines for labeling, dimensioning, line types and arrowheads. Key topics covered include the purpose of technical drawings in engineering, basic drawing terminology, and how to set up a drawing for clarity and accuracy.
superfinishing process
1) Super finishing processes such as honing, lapping, and super finishing are used to remove grinding defects from parts, obtain a desired surface finish, and improve geometry.
2) Finishing methods can involve material removal using fine machining, honing, and lapping, or forming without removal using glazing, blasting, and tumbling.
3) Specific super finishing processes include honing using abrasive stones, hand lapping by moving a workpiece on an abrasive plate, and machine lapping using a rotating table and rotating laps above and below the workpiece.
Chapter 01 introduction final
This is really useful to 1st year engineering student. It contain basic knowledge of engineering graphics
Engineering Drawing
Engineering drawings are a graphical means of communicating technical details and specifications without language barriers. They allow engineers to visualize and understand complex objects, structures, machines and their components. Drawings use standardized conventions, symbols and techniques to represent views, dimensions, materials, scales and other technical information precisely. They serve as roadmaps for manufacturing complex products. Manual drafting skills are still important for learning fundamental principles, even as computer-aided design has streamlined the process.
K to 12 TLE Curriculum Guide
This document provides information about a learning module on bread and pastry production for grades 7 and 8. It contains 4 lessons that cover key competencies including using tools and bakery equipment, performing measurements and calculations, maintaining tools and equipment, and practicing occupational health and safety procedures. The first lesson defines terms and identifies various baking tools and their uses, such as cake pans, biscuit cutters, mixing bowls, and measuring cups and spoons. It emphasizes the importance of preparing tools and equipment for their specific baking purposes.
Basic Mechanical Engineering drawing
This document provides an introduction to different types of technical drawings including orthographic projection views, sectional views, auxiliary views, and isometric drawings. It discusses topics such as dimensioning of radii, holes, countersinks, counterbores, and spot faces. Examples are provided for various types of projection views and isometric drawings. Exercises are included at the end to apply the concepts learned.
Engineering Drawing
Download link: https://www.researchgate.net/publication/318852873_Engineering_Drawing_-_I
DOI: 10.13140/RG.2.2.22512.56328
An engineering drawing is a type of technical drawing, used to fully and clearly define requirements for engineered items, and is usually created in accordance with standardized conventions for layout, nomenclature, interpretation, appearance size, etc.
Its purpose is to accurately and unambiguously capture all the geometric features of a product or a component. The end goal of an engineering drawing is to convey all the required information that will allow a manufacturer to produce that component.
Viewers also liked (17)
ME 312 Mechanical Machine Design [Screws, Bolts, Nuts]
ME 312 Mechanical Machine Design [Screws, Bolts, Nuts]
ME 312 Mechanical Machine Design - Introduction [Week 1]
ME 312 Mechanical Machine Design - Introduction [Week 1]
Similar to Steps in constructing an orthographic drawing
UNIT-3 PROJECTION OF SOLIDS.ppt
1. The document discusses different types of solids and their classification into two groups - Group A includes solids with bases of the same shape as the top, like cylinders and prisms. Group B includes solids with the base of one shape and just a point as the top, like cones and pyramids.
2. It then provides dimensional parameters and definitions for different solids like triangular faces, slant edges, generators, etc. It also discusses positions of solids relative to planes like standing, resting, and lying.
3. The rest of the document contains 10 problems solving different configurations of solids through their projections using standard procedures like making visible lines dark and hidden lines dotted. This includes
UNIT-3 PROJECTION OF SOLIDS.ppt
The document discusses various types of solids and their classification. It provides information on dimensional parameters of solids like prisms, pyramids, cylinders and cones. It also describes positions of solids like standing, resting and lying on horizontal and vertical planes. Several example problems are given with step-by-step solutions to draw projections of different solids in various orientations.
projection of solid
1) The document describes various geometric solids and their projections including prisms, pyramids, cylinders, cones, and frustums.
2) It provides examples of different solids placed in various positions and orientations and outlines the step-by-step process to draw their projections.
3) The examples illustrate how to draw projections when axes of solids are inclined to the planes of projection at various angles and when parts of solids intersect projection planes.
Chapter 5
The document discusses auxiliary views in technical drawings. It begins by defining auxiliary views as orthographic projections of angled surfaces that appear foreshortened in standard multi-view drawings. It then explains that auxiliary views are used to show the true size and shape of angled surfaces. The document provides steps for creating auxiliary views, including determining the dimension to show, drawing construction lines, and projecting points perpendicular from the reference view. It distinguishes between primary, secondary, partial, and half auxiliary views.
Lesson 8-sections-ii
This document discusses sections of cones and provides examples of drawing sections of cones cut by different planes. It begins by explaining that the true shape of a cone section can be a circle, ellipse, parabola, hyperbola, or triangle depending on how the cutting plane intersects the cone. It then provides five examples of drawing front, top, and true shape views of cones cut by various planes, and explains how to determine the true shape in each case. The document concludes by providing tips for drawing cone sections, such as how the true shape is affected by the orientation of the cutting plane.
Projection of solidsProjection of solidsProjection of solids
1. The document discusses different types of solids and their classification into two groups - Group A solids having top and base of same shape, and Group B solids having base of some shape and just a point as a top.
2. It provides steps to solve problems involving solids, which involves assuming the solid standing on the plane it is inclined to, drawing the front and top views, and then considering additional inclinations to draw the final views.
3. Sample problems are given involving solids like cubes, pyramids, cylinders and cones in different orientations to the planes. Dimensional parameters, positions of solids, and techniques to determine hidden and visible lines are also described.
Class 13 presentation
The document provides information about a 2D essentials class being taught from January to May 2012, including reminders about assignments due like the final project and exam, as well as covering topics to be discussed in class like auxiliary views, dimensioning, and group projects to practice techniques.
Lesson 8 Section of Solids - Part II
Sections of solids after a plane cut the solid and remove some portion of it. Apparent section and true shape of section.
Lesson 9-development-of-surfaces-i
This document discusses the development of surfaces for prisms and cylinders. It defines surface development as opening out the faces and bases of an object onto a flat plane. For prisms and cylinders, the parallel line method is used, involving drawing parallel lines the length of the base perimeter and marking faces between them. It provides examples of developing various prisms and cylinders, describing the steps like drawing projections, marking new points, and completing the development. Tips are given like using a 2H pencil first and projecting points accurately. References for further reading are also included.
Lesson 9-development-of-surfaces-i
This document discusses the development of surfaces for prisms and cylinders. It defines surface development as opening out the faces and bases of an object onto a flat plane. For prisms and cylinders, the parallel line method is used, in which two lines equal to the base perimeter are drawn parallel at a distance equal to the axis length. Faces are then marked between the lines. Several examples demonstrate how to develop the surfaces of prisms and cylinders when cut by planes. Tips are provided for accurately marking new points and completing the development.
Projection of planar surface
Projection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surfaceProjection of planar surface
Conics Sections.pptx
The document provides information on constructing conic sections like ellipses, parabolas, and hyperbolas using the eccentricity method. It gives step-by-step procedures to draw the curves based on the distance between the focus and directrix and the eccentricity. It also describes how to draw tangents and normals to these curves at any given point. Examples are included to practice constructing each type of conic section based on given parameters.
Engineering Drawing: Chapter 05 pictorial sketching
This document provides guidance on freehand sketching techniques for isometric projections and sketches. It discusses sketching lines, arcs, circles, curves, and objects from orthographic views. Key steps include locating centers and tangent points, using construction lines, and extruding 2D shapes to add the third dimension. Parallel lines should remain parallel in isometric views. Complex objects can be sketched by combining simple shapes or adding details gradually to the main form.
Lesson 7-sections-i
This document discusses sections of solids and how to draw them. It defines what a section is when a plane cuts through a solid. It provides instructions on how to draw sections, including marking new corners and projecting points to other views. It then gives 5 examples of drawing sections of different solids like prisms, pyramids, cylinders and cones in different orientations. It concludes by providing some tips on drawing sections and listing reference books.
SURVEY.pdf
This document provides information and guidelines for architectural drawings including floor plans, elevations, sections, and other drawing types. It discusses appropriate line weights, symbols, annotations, and other drafting conventions. Checklists are provided for key information to include in floor plans, elevations, sections and other drawings. Common architectural elements like stairs, flooring, and attic rooms are also briefly covered.
First and third angle projection
The document discusses different types of technical drawings used in civil engineering. It describes third angle and first angle projections, which differ in how top, front and side views of an object are arranged relative to each other on a page. It also covers conventions for indicating hidden lines, center lines, and the order drawings should be made. Dimensioning techniques like transferring measurements between views are explained. The document concludes by briefly discussing freehand sketching and physical modeling.
Lesson 12-isometric-projections-ii
This document discusses isometric projection and provides examples of how to draw isometric projections of various objects. It explains that isometric projection uses an isometric scale of 0.82 times the true length. It then provides step-by-step instructions for drawing isometric projections of a frustum of a cone, hexagonal prism with a cone, square pyramid on a cylinder, and a sphere on a cube. It concludes by providing some tips for drawing isometric projections, such as using isometric dimensions and representing spheres as circles.
John Benavides Sum 15 CAD Final Report
The document describes the modeling and finite element analysis of a Ratch-N-Lock pliers project completed in NX 8.5 CAD software. Key steps included modeling each component of the pliers, including the link, locking block, sliding block, locking nob, jaw, handle, and jaw handle. The components were then assembled. A 10 pound force was applied to the handle in the finite element analysis to determine stresses on the pliers from an applied load.
Projection of solids
1. The document discusses different types of solids and their classification into two groups based on the shape of their top and base.
2. It provides instructions on how to solve problems involving solids by assuming their position and orientation, and drawing their front, top, and side views in three steps.
3. Examples of problems involving solids like cubes, pyramids, cylinders, and cones in different orientations are presented along with their step-by-step solutions.
Projectionofsolids(thedirectdata[1].com)
1. The document discusses different types of solids and their classification into two groups: Group A solids have the same shape for the top and base, while Group B solids have the base of some shape and just a point for the top.
2. It provides details on the dimensional parameters of solids like cylinders, cones, prisms and pyramids. It also describes how to solve problems involving solids in three steps: assuming the solid standing on a reference plane, drawing the front and top views, and considering any remaining inclinations.
3. An example problem is given involving drawing the projections of a freely suspended pentagonal pyramid with conditions specified.
Similar to Steps in constructing an orthographic drawing (20)
Projection of solidsProjection of solidsProjection of solids
Projection of solidsProjection of solidsProjection of solids
Engineering Drawing: Chapter 05 pictorial sketching
Engineering Drawing: Chapter 05 pictorial sketching
Recently uploaded
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Variable frequency drive .A Variable Frequency Drive (VFD) is an electronic device used to control the speed and torque of an electric motor by varying the frequency and voltage of its power supply. VFDs are widely used in industrial applications for motor control, providing significant energy savings and precise motor operation.
Recently uploaded (20)
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
VARIABLE FREQUENCY DRIVE. VFDs are widely used in industrial applications for...
Steps in constructing an orthographic drawing
- 2. 1. Draw the vertical and horizontal axes. 2. Plot the principal dimensions by marking the axes. Width (W) on the horizontal axis; Height (H) on the vertical axis as well as the space between Front View (FV) and Top View (TV). 3. Construct the initial or the enclosing box of the Top View (TV) and the Front View (FV) by projecting all the marks horizontally and vertically. Use your triangles. 4. Construct the miter line at 45° angle from the upper rightmost corner of the Front View’s initial box using the 45° triangle. 5. Project down all intersecting points to get the depth of the Right Side View (RSV) and to form its initial box. 6. Plot the sub-dimensions by marking the axes. 7. Sketch the details of the primary views by projecting all markings horizontally and vertically. 8. Darken the final edges of the views. Use hidden lines if necessary. 9. Label your drawing.