SAE STANDARD J/ISO 10567
•
3 likes•3,121 views
The document contains 11 repetitions of the copyright line "Copyright by the SAE International Fri Apr 15 01:41:16 2011". It asserts copyright ownership over the content by the SAE International organization and provides the date and time of copyright.
Report
Share
Report
Share
Download to read offline
Recommended
ERECTION METHOD STATEMENT
The document provides guidelines for erecting steel structures, including:
- Unloading materials using cranes and manually arranging them near installation locations.
- Erecting columns by lifting them into place with cranes, setting them on anchor bolts, and securing with temporary cables until bolts are tightened.
- Assembling rafter members on the ground, installing bracing, and then lifting into place and connecting to erected columns.
- Repeating column and rafter erection to complete frames, ensuring connections are bolted before releasing lifting equipment.
Lifting plan template
This document provides a lifting plan, risk assessment, and method statement for lifting operations. It includes details of the load, cranes, lifting accessories, hazards identified, risk assessment, responsibilities of personnel, and acceptance signatures. The key details are the load weight and dimensions, crane models and capacities, identified hazards like overhead power lines, and the sequence of operations. Personnel roles like appointed person, slinger, and crane supervisor are defined. Weather limits and ground conditions are also addressed.
Excavation and-trenching safety 03
The document discusses excavation and trench safety guidelines. It provides an overview of regulations from the NYC Department of Buildings and OSHA regarding trench excavation safety. Key risks include cave-ins being the most common accident, with most fatalities occurring in trenches between 5-14 feet deep. Proper protection of excavations through sloping, shoring, or benching is required for excavations deeper than 5 feet. Regular inspection and maintenance of excavation protection systems is emphasized.
Rigging & Slinging Training Course.pdf
This document contains information from a rigging and slinging training course, including:
1. An overview of relevant legislation such as LOLER, PUWER, and HASAWA.
2. Definitions of key lifting terms and the roles and responsibilities of riggers.
3. Guidelines for inspecting and using various types of wire rope slings, including maximum load limits for different configurations.
313440656 crane-lifting-calculation-sheet
This document provides a checklist and calculation form for mobile crane lifts up to 10 tons. The form is to be completed each time the crane is set up in a new location to calculate the maximum planned lift weight and radius. It includes sections to record the crane setup details, total lift weight, crane capacity at the current setup, and sign-off from the crane operator, rigger, and supervisor.
Method statement piping works
The document provides a method statement for piping installation works at the Dabbiya site for the Al Dabbiya Phase-1 Additional Injection Wells Tie-Ins project. It outlines the scope of works, sequence of activities, resources, HSE requirements, and emergency contacts. Piping works will involve transporting prefabricated spools to site, lifting them into position, welding field joints, installing valves, and testing. Welding will follow approved procedures and NDT testing. HSE precautions like PPE and fire safety will be enforced during the medium risk work.
2009 IVECO DAILY 4 Service Repair Manual
The repair manual provides instructions for qualified technicians to perform repairs on vehicles and components, addressing mechanical, electrical and electronic systems. The document stresses that repairs should only be done by trained personnel using proper tools and safety equipment, and any unauthorized modifications would void guarantees. Technicians are advised to strictly follow the indicated procedures to ensure correct and safe repairs.
PRESSURE TESTING PERMIT Form # HSEQ - PTP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE TEST AND IS NOT EXTENDABLE
Description of Task:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Design Pressure of Pipeline: Operating Pressure:
Testing Pressure: Pressure Time:
3. Pressure Testing Details: (To be filled by initiator/originator)
Type of Work Request ☐ Hydrostatic
☐ Pneumatic
☐ Gravity Testing
☐ Other :
Type of Equipment testing: ☐ Pipeline
☐ GRP ☐ AC ☐ others:
☐ Tanks
☐ Hose
☐ Other(s)
Dimensions: Pipeline/Tank/Hose
☐ Diameter:
☐ Thickness:
☐ Length:
☐ Other(s):
Attachment(s): ☐ Plan
☐ Sketch
☐ Drawing (approved)
☐ Method Statement & Risk Assessment
☐ Authority Approvals (NOCs)
☐ Road Traffic Approval (if applicable)
☐ Other(s)
4. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Is the segment of pipeline under testing isolated from service by closing nearest valves? ☐ ☐ ☐
Risk assessment/ method statement developed, approved and communicated? ☐ ☐ ☐
Is the Liquid/Gas vented/removed from the pipeline? ☐ ☐ ☐
Testing & monitoring of the environment prior to entry? ☐ ☐ ☐
Test Head and End plug/end point are properly sealed/secured/tighten. ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Is Air vented completely by pumping and filling the water in the testing segment pipeline without pressurizing? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Pressure testing equipment in good condition with available safe guards ☐ ☐ ☐
Provision of vigilance supervision? ☐ ☐ ☐
Flexible pipe/hose are in good condition and connections are safely clamped ☐ ☐ ☐
Proper barricade and signage are posted? ☐ ☐ ☐
Pressure testing gauge have valid calibration. ☐ ☐ ☐
Safe means of access/egress provided? ☐ ☐ ☐
Pressure testing gauge/ valve are in safe & accessible place outside restricted/isolated area ☐ ☐ ☐
Means of communication available? ☐ ☐ ☐
Is the testing pipeline/vessel/tank are properly isolated ☐ ☐ ☐
Electrical equipment & connections safe? ☐ ☐ ☐
Is confined space PTW required & obtained? ☐ ☐ ☐
Other(s) ☐ ☐ ☐
5. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
6. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
Recommended
ERECTION METHOD STATEMENT
The document provides guidelines for erecting steel structures, including:
- Unloading materials using cranes and manually arranging them near installation locations.
- Erecting columns by lifting them into place with cranes, setting them on anchor bolts, and securing with temporary cables until bolts are tightened.
- Assembling rafter members on the ground, installing bracing, and then lifting into place and connecting to erected columns.
- Repeating column and rafter erection to complete frames, ensuring connections are bolted before releasing lifting equipment.
Lifting plan template
This document provides a lifting plan, risk assessment, and method statement for lifting operations. It includes details of the load, cranes, lifting accessories, hazards identified, risk assessment, responsibilities of personnel, and acceptance signatures. The key details are the load weight and dimensions, crane models and capacities, identified hazards like overhead power lines, and the sequence of operations. Personnel roles like appointed person, slinger, and crane supervisor are defined. Weather limits and ground conditions are also addressed.
Excavation and-trenching safety 03
The document discusses excavation and trench safety guidelines. It provides an overview of regulations from the NYC Department of Buildings and OSHA regarding trench excavation safety. Key risks include cave-ins being the most common accident, with most fatalities occurring in trenches between 5-14 feet deep. Proper protection of excavations through sloping, shoring, or benching is required for excavations deeper than 5 feet. Regular inspection and maintenance of excavation protection systems is emphasized.
Rigging & Slinging Training Course.pdf
This document contains information from a rigging and slinging training course, including:
1. An overview of relevant legislation such as LOLER, PUWER, and HASAWA.
2. Definitions of key lifting terms and the roles and responsibilities of riggers.
3. Guidelines for inspecting and using various types of wire rope slings, including maximum load limits for different configurations.
313440656 crane-lifting-calculation-sheet
This document provides a checklist and calculation form for mobile crane lifts up to 10 tons. The form is to be completed each time the crane is set up in a new location to calculate the maximum planned lift weight and radius. It includes sections to record the crane setup details, total lift weight, crane capacity at the current setup, and sign-off from the crane operator, rigger, and supervisor.
Method statement piping works
The document provides a method statement for piping installation works at the Dabbiya site for the Al Dabbiya Phase-1 Additional Injection Wells Tie-Ins project. It outlines the scope of works, sequence of activities, resources, HSE requirements, and emergency contacts. Piping works will involve transporting prefabricated spools to site, lifting them into position, welding field joints, installing valves, and testing. Welding will follow approved procedures and NDT testing. HSE precautions like PPE and fire safety will be enforced during the medium risk work.
2009 IVECO DAILY 4 Service Repair Manual
The repair manual provides instructions for qualified technicians to perform repairs on vehicles and components, addressing mechanical, electrical and electronic systems. The document stresses that repairs should only be done by trained personnel using proper tools and safety equipment, and any unauthorized modifications would void guarantees. Technicians are advised to strictly follow the indicated procedures to ensure correct and safe repairs.
PRESSURE TESTING PERMIT Form # HSEQ - PTP Rev 2 -.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE TEST AND IS NOT EXTENDABLE
Description of Task:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Design Pressure of Pipeline: Operating Pressure:
Testing Pressure: Pressure Time:
3. Pressure Testing Details: (To be filled by initiator/originator)
Type of Work Request ☐ Hydrostatic
☐ Pneumatic
☐ Gravity Testing
☐ Other :
Type of Equipment testing: ☐ Pipeline
☐ GRP ☐ AC ☐ others:
☐ Tanks
☐ Hose
☐ Other(s)
Dimensions: Pipeline/Tank/Hose
☐ Diameter:
☐ Thickness:
☐ Length:
☐ Other(s):
Attachment(s): ☐ Plan
☐ Sketch
☐ Drawing (approved)
☐ Method Statement & Risk Assessment
☐ Authority Approvals (NOCs)
☐ Road Traffic Approval (if applicable)
☐ Other(s)
4. Prerequisites: (To be filled by initiator/originator and verified by Evaluator)
Checks Yes-No-NA Checks Yes-No-NA
Is the segment of pipeline under testing isolated from service by closing nearest valves? ☐ ☐ ☐
Risk assessment/ method statement developed, approved and communicated? ☐ ☐ ☐
Is the Liquid/Gas vented/removed from the pipeline? ☐ ☐ ☐
Testing & monitoring of the environment prior to entry? ☐ ☐ ☐
Test Head and End plug/end point are properly sealed/secured/tighten. ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Is Air vented completely by pumping and filling the water in the testing segment pipeline without pressurizing? ☐ ☐ ☐
Operatives are trained and competent? ☐ ☐ ☐
Pressure testing equipment in good condition with available safe guards ☐ ☐ ☐
Provision of vigilance supervision? ☐ ☐ ☐
Flexible pipe/hose are in good condition and connections are safely clamped ☐ ☐ ☐
Proper barricade and signage are posted? ☐ ☐ ☐
Pressure testing gauge have valid calibration. ☐ ☐ ☐
Safe means of access/egress provided? ☐ ☐ ☐
Pressure testing gauge/ valve are in safe & accessible place outside restricted/isolated area ☐ ☐ ☐
Means of communication available? ☐ ☐ ☐
Is the testing pipeline/vessel/tank are properly isolated ☐ ☐ ☐
Electrical equipment & connections safe? ☐ ☐ ☐
Is confined space PTW required & obtained? ☐ ☐ ☐
Other(s) ☐ ☐ ☐
5. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
6. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANES
This document provides guidelines for inspection, testing and examination of cranes according to BS 7121-2 Code of Practice for Safe Use of Cranes Part 2. It outlines requirements for pre-use checks, in-service inspections, and thorough examinations to be carried out by competent personnel. Thorough examinations must follow a written examination scheme and are required at least every 6 months for cranes that lift persons and every 12 months for other cranes. The document specifies inspection and testing procedures, responsibilities of different parties, and record keeping requirements.
WORK AT HEIGHT PERMIT Form # HSEQ - WHP Rev.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Type :
Work at height without guardrails
Work at height on fragile surfaces
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator) Yes-No-NA
Method Statement and Risk Assessment developed, approved and communicated? ☐ ☐ ☐
Area barricaded & proper signage are posted? ☐ ☐ ☐
Qualified and briefed workers? ☐ ☐ ☐
PPE of workers available & inspected as per MS/RA? ☐ ☐ ☐
Tools/Equipment inspected? ☐ ☐ ☐
Safe means of access/ Egress? ☐ ☐ ☐
Lifeline available and inspected? ☐ ☐ ☐
Fragile surface covered / work surface protected? ☐ ☐ ☐
Dimensions of platform and restrain lanyard match safety requirement? ☐ ☐ ☐
Harness with double lanyard provided and its use briefed to workforce? ☐ ☐ ☐
Harness anchorage point checked? ☐ ☐ ☐
Load bearing capacity of anchoring point checked? ☐ ☐ ☐
Load bearing capacity of fragile service checked? ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Others ( Specify) ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature : Time:
How to build a platform
The six main steps to build an oil platform are:
1. Long steel tubes are welded together to form the frame or "jacket" which is towed out to the field and secured onto the seabed.
2. The topsides structure is constructed separately with equipment and then floated over and lowered onto the secured jacket.
3. After construction of the multi-decked topsides is completed by connecting all pipework and equipment, it is loaded onto a barge for transport.
10. lifting-plan-checklist-and-method-statement-2
This document is a lifting plan checklist and method statement for mobile crane lifts. It contains sections for pre-planning the lift, checking the crane on site, and authorizing the lifting operation. Section A requires information on the load, crane access, lift details, and hazards. Section B verifies crane qualifications and positioning. Section C outlines the lift task, controls, assigned roles, lift details, and authorizes the operation start and end times. The checklist aims to ensure lifts are properly planned and authorized according to safety standards.
Analysis of Stress in Nozzle/Shell of Cylindrical Pressure Vessel under Inter...
This work a comparative study of the methods of analysis of stress in vessel/nozzle, due to external loads. The
methods of analysis compared are WRC 107, WRC 297 and Method of Finite Elements. To make the
comparison between the methods, one model of nozzle has been developed without reinforcement plate. In this
nozzle it was applied external loads and after the application of the loads, compared the results of stress for the
three methods of analyses considered in this study.
Komatsu D155A-5 Dozer Bulldozer Service Repair Manual S/N 65001 and up
This is the Highly Detailed factory service repair manual for theKOMATSU D155A-5 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D155A-5 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Structure and Function
Testing and Adjusting
Disassembly and Assembly
Maintenance Standard
Others
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D155A-5 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
BS 7121-1 Cranes General 06.pdf
This document provides guidance on safely operating cranes according to British standards. It covers topics such as management of lifting operations, planning, personnel roles and qualifications, crane selection, setup and maintenance, operating procedures, inspections, and more. The purpose is to recommend practices that help ensure lifting operations are carried out safely.
Safety In Gas Cutting.
Safety in gas cutting requires understanding hazards, proper equipment use, and risk assessment. Key precautions include: knowing equipment parts and how to handle leaks, fires, or backfires; removing combustibles; using protective gear; and maintaining equipment. A risk assessment should consider training, permits, and job safety analysis to minimize dangers.
Mobile crane
This document provides an overview of mobile crane regulations around the world. It discusses the parts of mobile cranes including the chassis/base, upperworks, swing mechanism, and parameters considered for safe operation. Load charts and duty charts are described which specify the rated capacity of cranes under different configurations. Factors that influence safe working like ground conditions, wind, electricity hazards and multi-crane lifts are also covered.
Mechanical completion
The document discusses mechanical completion, which involves checking and testing equipment, piping, instrumentation, and other components to confirm they are installed correctly and ready for commissioning. It describes the documentation involved, including mechanical completion certificates, check records, and punch lists. Various activities involved in mechanical completion are also outlined for disciplines like mechanical, electrical, instrumentation, and piping.
Lifting tools
This document provides an overview of important factors related to safe lifting operations, including common accidents, legislative requirements, roles of personnel, machinery considerations, and types of lifting gears. It discusses cranes like mobile cranes and tower cranes and safe operation points. It also covers various lifting gears such as wire rope slings, chain slings, hooks, and their inspection and proper use. The document emphasizes the importance of following safety procedures and using qualified personnel and properly inspected equipment to reduce lifting accidents.
Martillo hidraulico especificaciones
El documento describe una nueva línea de martillos hidráulicos diseñados para ofrecer un alto rendimiento con menores necesidades de mantenimiento. Incluyen características como un regulador de presión automático, amortiguadores para reducir ruido y vibraciones, y una cámara energética superior para un rendimiento constante. Los martillos son compatibles con varios modelos de cargadoras y miniexcavadoras Bobcat a través de diferentes opciones de montaje.
Instalacion sello mecanico 771
Este documento proporciona instrucciones para la instalación de un sello mecánico cartucho balanceado modelo 771. Incluye verificaciones del equipo, alineación de la tubería, montaje del sello, planes de control ambiental, recomendaciones y especificaciones técnicas. El sello 771 es adecuado para trabajo mediano y pesado en la industria y requiere una instalación cuidadosa siguiendo los procedimientos descritos.
EOT Crane Inspection Check list, helpful for safety officers during inspection
This document contains a checklist for inspecting an EOT crane. It lists 17 parameters to observe including the condition of the cabin, lift platform, limits, neutral interlock system, emergency switches, collector platform, bridge lights, walkways, rails, hooks, pulleys, and ropes. For each parameter, the inspection notes the observation and any remarks. The checklist is used to systematically inspect all components of the EOT crane.
11 piling operations with rebar cage installation risk assessment templates
11 Piling Operations with Rebar Cage installation Risk Assessment Templates
Piling Rig checks on arrival to site
PRIOR TO USE
Access of rig and delivery vehicles to work areas
Siting and setting up of piling rig
Piling operation
(Mobile rig Operator)
Rebar cage fabrication
Pile case and rebar cage lifting operations
Method statement of temporary office and fa
The document outlines plans for temporary site facilities for the Dasherkandi Sewage Treatment Plant Project. It details the scope of work, organization structure, construction methodology, safety plans, and site layout. Temporary facilities will include site offices, dormitories, workshops, warehouses, and batching plants. The project aims to treat wastewater from several areas of Dhaka to reduce pollution in the Balu River.
22 casting of concrete columns risk assessment templates
Concrete Pump checks on arrival to site
PRIOR TO SITE ACCESS
Formwork for columns
Scaffolding to formwork
Access of mobile pump and delivery trucks to work areas
Siting and setting up of concrete pump
Pumping concrete
(Pump Operator)
LEEA Appointed Person in lifting Operations accreditation training
Arbrit Safety Training and Consultancy are planning to conduct Lifting Equipment Engineers Association (LEEA) Appointed Person in lifting operations accreditation training in Abu Dhabi on 16 December. IIRSM members can expect a discount of 15%.
Full details can be found on the brochure attached.
Aircraft landing gear
It is an undercarriage of an aircraft, which supports the entire weight during landing and ground operation.
Toyota 42-6FGU25 Forklift Service Repair Manual
This manual provides service procedures for the Toyota Forklift 6FGU15-30. It covers models from July 1995 and notes that designs may have changed. It lists repair manuals for mounted engines to use along with this manual. The general section provides exterior views, vehicle models, frame numbers, how to read the manual, terminology, abbreviations, operational tips, standard bolt tightening torques, bolt identification methods, a tightening torque table, instructions for precoat bolts, high pressure hose fitting torques, wire rope suspension angles and load capacities, component weights, lubrication quantities and types, and a lubrication chart and maintenance schedule.
Sae -j744-1996
The document is an SAE standard that provides specifications for hydraulic pump and motor mounting dimensions and shaft dimensions. It includes tables that list identification codes and dimensional specifications for various flange and shaft types, including pilot diameters, bolt hole counts and sizes, thread types, and other measurements. Figures are also included to illustrate key dimensions. The standard applies to hydraulic components used on off-road equipment and provides compatible mounting and connection standards.
Machinery splines
1. The document discusses involute splines and serrations, which are parallel keys formed integrally with a shaft that mate with grooves cut in a hub. Involute splines have teeth with involute profiles that provide greater torque capacity than other types of splines.
2. The standard for involute splines in the U.S. establishes specifications for dimensions, fits, tolerances and definitions of terms. It includes splines with 30, 37.5 and 45 degree pressure angles.
3. Involute splines have maximum strength at the base, can be accurately spaced and are self-centering under load, equalizing stresses. Their interchangeability allows for a "tolerance class
More Related Content
What's hot
Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANES
This document provides guidelines for inspection, testing and examination of cranes according to BS 7121-2 Code of Practice for Safe Use of Cranes Part 2. It outlines requirements for pre-use checks, in-service inspections, and thorough examinations to be carried out by competent personnel. Thorough examinations must follow a written examination scheme and are required at least every 6 months for cranes that lift persons and every 12 months for other cranes. The document specifies inspection and testing procedures, responsibilities of different parties, and record keeping requirements.
WORK AT HEIGHT PERMIT Form # HSEQ - WHP Rev.docx
1. Project Information: (To be filled by initiator/originator)
Project Name: Permit No.:
Project Location:
Requesting Contractor/Company
2. Permit Issuance Details: (To be filled by initiator/originator)
THIS PERMIT IS ONLY FOR ONE SHIFT AND NOT EXTENDABLE
Description of Task:
Detail of Surroundings:
Permit Validity:
Time (from): __________Hrs.
Time (To): __________Hrs.
Date:
Type :
Work at height without guardrails
Work at height on fragile surfaces
3. Prerequisites: (To be filled by initiator/originator and verified by Evaluator) Yes-No-NA
Method Statement and Risk Assessment developed, approved and communicated? ☐ ☐ ☐
Area barricaded & proper signage are posted? ☐ ☐ ☐
Qualified and briefed workers? ☐ ☐ ☐
PPE of workers available & inspected as per MS/RA? ☐ ☐ ☐
Tools/Equipment inspected? ☐ ☐ ☐
Safe means of access/ Egress? ☐ ☐ ☐
Lifeline available and inspected? ☐ ☐ ☐
Fragile surface covered / work surface protected? ☐ ☐ ☐
Dimensions of platform and restrain lanyard match safety requirement? ☐ ☐ ☐
Harness with double lanyard provided and its use briefed to workforce? ☐ ☐ ☐
Harness anchorage point checked? ☐ ☐ ☐
Load bearing capacity of anchoring point checked? ☐ ☐ ☐
Load bearing capacity of fragile service checked? ☐ ☐ ☐
Emergency response procedure and rescue plan are developed & communicated? ☐ ☐ ☐
Others ( Specify) ☐ ☐ ☐
4. Acknowledgement by Initiator and Evaluator:
☐ Acknowledge that all above precautions have been taken. These have also been fully explained to the operatives, and I consider them competent to do it safely.
Initiator/Originator Name: Designation:
Signature: Date /Time:
☐ Acknowledge that I have checked above control measures and consider the work area safe to carry out the activity
Evaluator (HSE Team): Designation:
Signature: Date /Time
Comments (if any):
5. Authorization (PM/CM):
Name: Designation:
Signature: Date /Time:
6. Completion/Cancelation of Permit:
☐ Acknowledge that the area have been restored to a safe and orderly condition.
Initiator Signature: Time:
☐ Acknowledge that I have checked the area and been restored to a safe and orderly condition.
Evaluator Signature : Time:
How to build a platform
The six main steps to build an oil platform are:
1. Long steel tubes are welded together to form the frame or "jacket" which is towed out to the field and secured onto the seabed.
2. The topsides structure is constructed separately with equipment and then floated over and lowered onto the secured jacket.
3. After construction of the multi-decked topsides is completed by connecting all pipework and equipment, it is loaded onto a barge for transport.
10. lifting-plan-checklist-and-method-statement-2
This document is a lifting plan checklist and method statement for mobile crane lifts. It contains sections for pre-planning the lift, checking the crane on site, and authorizing the lifting operation. Section A requires information on the load, crane access, lift details, and hazards. Section B verifies crane qualifications and positioning. Section C outlines the lift task, controls, assigned roles, lift details, and authorizes the operation start and end times. The checklist aims to ensure lifts are properly planned and authorized according to safety standards.
Analysis of Stress in Nozzle/Shell of Cylindrical Pressure Vessel under Inter...
This work a comparative study of the methods of analysis of stress in vessel/nozzle, due to external loads. The
methods of analysis compared are WRC 107, WRC 297 and Method of Finite Elements. To make the
comparison between the methods, one model of nozzle has been developed without reinforcement plate. In this
nozzle it was applied external loads and after the application of the loads, compared the results of stress for the
three methods of analyses considered in this study.
Komatsu D155A-5 Dozer Bulldozer Service Repair Manual S/N 65001 and up
This is the Highly Detailed factory service repair manual for theKOMATSU D155A-5 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D155A-5 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Structure and Function
Testing and Adjusting
Disassembly and Assembly
Maintenance Standard
Others
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D155A-5 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
BS 7121-1 Cranes General 06.pdf
This document provides guidance on safely operating cranes according to British standards. It covers topics such as management of lifting operations, planning, personnel roles and qualifications, crane selection, setup and maintenance, operating procedures, inspections, and more. The purpose is to recommend practices that help ensure lifting operations are carried out safely.
Safety In Gas Cutting.
Safety in gas cutting requires understanding hazards, proper equipment use, and risk assessment. Key precautions include: knowing equipment parts and how to handle leaks, fires, or backfires; removing combustibles; using protective gear; and maintaining equipment. A risk assessment should consider training, permits, and job safety analysis to minimize dangers.
Mobile crane
This document provides an overview of mobile crane regulations around the world. It discusses the parts of mobile cranes including the chassis/base, upperworks, swing mechanism, and parameters considered for safe operation. Load charts and duty charts are described which specify the rated capacity of cranes under different configurations. Factors that influence safe working like ground conditions, wind, electricity hazards and multi-crane lifts are also covered.
Mechanical completion
The document discusses mechanical completion, which involves checking and testing equipment, piping, instrumentation, and other components to confirm they are installed correctly and ready for commissioning. It describes the documentation involved, including mechanical completion certificates, check records, and punch lists. Various activities involved in mechanical completion are also outlined for disciplines like mechanical, electrical, instrumentation, and piping.
Lifting tools
This document provides an overview of important factors related to safe lifting operations, including common accidents, legislative requirements, roles of personnel, machinery considerations, and types of lifting gears. It discusses cranes like mobile cranes and tower cranes and safe operation points. It also covers various lifting gears such as wire rope slings, chain slings, hooks, and their inspection and proper use. The document emphasizes the importance of following safety procedures and using qualified personnel and properly inspected equipment to reduce lifting accidents.
Martillo hidraulico especificaciones
El documento describe una nueva línea de martillos hidráulicos diseñados para ofrecer un alto rendimiento con menores necesidades de mantenimiento. Incluyen características como un regulador de presión automático, amortiguadores para reducir ruido y vibraciones, y una cámara energética superior para un rendimiento constante. Los martillos son compatibles con varios modelos de cargadoras y miniexcavadoras Bobcat a través de diferentes opciones de montaje.
Instalacion sello mecanico 771
Este documento proporciona instrucciones para la instalación de un sello mecánico cartucho balanceado modelo 771. Incluye verificaciones del equipo, alineación de la tubería, montaje del sello, planes de control ambiental, recomendaciones y especificaciones técnicas. El sello 771 es adecuado para trabajo mediano y pesado en la industria y requiere una instalación cuidadosa siguiendo los procedimientos descritos.
EOT Crane Inspection Check list, helpful for safety officers during inspection
This document contains a checklist for inspecting an EOT crane. It lists 17 parameters to observe including the condition of the cabin, lift platform, limits, neutral interlock system, emergency switches, collector platform, bridge lights, walkways, rails, hooks, pulleys, and ropes. For each parameter, the inspection notes the observation and any remarks. The checklist is used to systematically inspect all components of the EOT crane.
11 piling operations with rebar cage installation risk assessment templates
11 Piling Operations with Rebar Cage installation Risk Assessment Templates
Piling Rig checks on arrival to site
PRIOR TO USE
Access of rig and delivery vehicles to work areas
Siting and setting up of piling rig
Piling operation
(Mobile rig Operator)
Rebar cage fabrication
Pile case and rebar cage lifting operations
Method statement of temporary office and fa
The document outlines plans for temporary site facilities for the Dasherkandi Sewage Treatment Plant Project. It details the scope of work, organization structure, construction methodology, safety plans, and site layout. Temporary facilities will include site offices, dormitories, workshops, warehouses, and batching plants. The project aims to treat wastewater from several areas of Dhaka to reduce pollution in the Balu River.
22 casting of concrete columns risk assessment templates
Concrete Pump checks on arrival to site
PRIOR TO SITE ACCESS
Formwork for columns
Scaffolding to formwork
Access of mobile pump and delivery trucks to work areas
Siting and setting up of concrete pump
Pumping concrete
(Pump Operator)
LEEA Appointed Person in lifting Operations accreditation training
Arbrit Safety Training and Consultancy are planning to conduct Lifting Equipment Engineers Association (LEEA) Appointed Person in lifting operations accreditation training in Abu Dhabi on 16 December. IIRSM members can expect a discount of 15%.
Full details can be found on the brochure attached.
Aircraft landing gear
It is an undercarriage of an aircraft, which supports the entire weight during landing and ground operation.
Toyota 42-6FGU25 Forklift Service Repair Manual
This manual provides service procedures for the Toyota Forklift 6FGU15-30. It covers models from July 1995 and notes that designs may have changed. It lists repair manuals for mounted engines to use along with this manual. The general section provides exterior views, vehicle models, frame numbers, how to read the manual, terminology, abbreviations, operational tips, standard bolt tightening torques, bolt identification methods, a tightening torque table, instructions for precoat bolts, high pressure hose fitting torques, wire rope suspension angles and load capacities, component weights, lubrication quantities and types, and a lubrication chart and maintenance schedule.
What's hot (20)
Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANES
Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANES
Analysis of Stress in Nozzle/Shell of Cylindrical Pressure Vessel under Inter...
Analysis of Stress in Nozzle/Shell of Cylindrical Pressure Vessel under Inter...
Komatsu D155A-5 Dozer Bulldozer Service Repair Manual S/N 65001 and up
Komatsu D155A-5 Dozer Bulldozer Service Repair Manual S/N 65001 and up
EOT Crane Inspection Check list, helpful for safety officers during inspection
EOT Crane Inspection Check list, helpful for safety officers during inspection
11 piling operations with rebar cage installation risk assessment templates
11 piling operations with rebar cage installation risk assessment templates
22 casting of concrete columns risk assessment templates
22 casting of concrete columns risk assessment templates
LEEA Appointed Person in lifting Operations accreditation training
LEEA Appointed Person in lifting Operations accreditation training
Viewers also liked
Sae -j744-1996
The document is an SAE standard that provides specifications for hydraulic pump and motor mounting dimensions and shaft dimensions. It includes tables that list identification codes and dimensional specifications for various flange and shaft types, including pilot diameters, bolt hole counts and sizes, thread types, and other measurements. Figures are also included to illustrate key dimensions. The standard applies to hydraulic components used on off-road equipment and provides compatible mounting and connection standards.
Machinery splines
1. The document discusses involute splines and serrations, which are parallel keys formed integrally with a shaft that mate with grooves cut in a hub. Involute splines have teeth with involute profiles that provide greater torque capacity than other types of splines.
2. The standard for involute splines in the U.S. establishes specifications for dimensions, fits, tolerances and definitions of terms. It includes splines with 30, 37.5 and 45 degree pressure angles.
3. Involute splines have maximum strength at the base, can be accurately spaced and are self-centering under load, equalizing stresses. Their interchangeability allows for a "tolerance class
Gear stress lewis_formula
The document discusses gear strength analysis and design. It summarizes the Lewis equation for bending stress in gears and its limitations. It then introduces the AGMA gear stress equation which modifies the Lewis equation to better account for factors like radial forces, stress concentrations, and multiple teeth in contact. It also discusses factors for velocity, overload, size, and others. The document further discusses surface stresses and wear between gear teeth. It provides the AGMA equation for surface (contact) stress. Finally, it outlines the design process using the bending and surface strength equations along with material properties and factors.
NOISE REDUCTION IN GEAR TRAIN
The document discusses methods for reducing noise in a gear train. It identifies sources of noise such as worn teeth and backlash. It then presents several component-oriented concepts for reducing noise, such as using scissors gears, torsion springs, or gears with elastomeric material between them. The document also discusses selecting appropriate gear materials and redesigning the gear train layout, such as using fewer gears or bevel gears, to reduce noise.
Expert tool industries presentation
This document provides information about Expert Tool Industries, a manufacturer of gear hobs, shaper cutters, milling cutters, and form tools. It details the company's manufacturing facilities, products, and services. The company produces various types of gear hobs, shaper cutters, milling cutters, and can customize form tools as per customer specifications. Expert Tool Industries has over 15 years of experience in design, manufacturing and inspection of cutting tools.
NOISE REDUCTION IN GEAR TRAIN
The document discusses methods for reducing noise in a gear train. It identifies sources of noise such as worn teeth and backlash. It then presents several component-oriented concepts for reducing noise, such as using scissors gears, torsion springs, or gears with elastomeric material between them. It also discusses selecting appropriate gear materials and redesigning the gear train layout, such as using fewer gears or bevel gears, to reduce noise.
Bearing stress
This powerpoint presentation deals mainly about bearing stress, its concept and its applications.
Members:
BARIENTOS, Lei Anne
MARTIREZ, Wilbur
MORIONES, Jan Ebenezer
NERI, Laiza Paulene
Sir Romeo Alastre - MEC32/A1
Presentation on Spur Gear
This document discusses the fabrication of a spur gear. It begins with introducing gears and their uses, classifying spur gears and their applications. It then discusses gear terminology and provides examples. The document presents a problem of designing a spur gear to transmit 30hp at 1800rpm. It provides the solution, specifying cast iron material, an 8 pitch diameter, a 1.0625 inch face width, 20 teeth for the pinion and 24 teeth for the gear. Milling is selected as the manufacturing process due to its flexibility, accuracy and cost. Finally, a rendered image of the manufactured spur gear is presented.
Gear
This document discusses gears, including their types, nomenclature, applications, and gear trains. It describes common gear types like spur gears, helical gears, bevel gears, and worm gears. It defines gear terminology like pitch circle, diametral pitch, and module. It also explains different gear train configurations like simple, compound, and planetary gear trains and their applications.
Study of Gear Technology
Power transmission involves transferring rotational force from one component to another using gears. Gears come in different types depending on the position of their shafts, including spur gears, helical gears, bevel gears, and worm gears. Gears are used to change rotational speed and torque in machines and vehicles through gear trains and different gear ratios.
Gears and Gear Trains
This document provides an overview of gears and gear trains. It defines gears as toothed wheels that transmit motion between two shafts, and gear trains as combinations of two or more meshing gears. The document then discusses the types of gears based on axis position and peripheral velocity, as well as the materials and manufacturing processes used to make gears. Finally, applications of gear trains are described, including their use in differentials to allow wheels to rotate at different speeds.
Human teeth
This document provides information about human teeth. It discusses the structure and composition of teeth, including that teeth are made of calcium, phosphorus, and other minerals. It notes that humans have 32 permanent teeth consisting of incisors, canines, premolars, and molars. The document describes the internal and external parts of a tooth, including the enamel, dentin, pulp cavity, and nerves. It provides a tooth eruption chart showing when primary and permanent teeth emerge. It also discusses tooth decay and the importance of brushing teeth and visiting the dentist.
Introduction to Gears
Gears are components that transmit rotational motion between two shafts. There are several types of gears classified by the position of their shafts, including spur gears where the teeth are parallel to the axis of rotation, helical gears which are cut at an angle, and bevel gears where the shafts meet at an angle. Gears are used in many machines and mechanisms to increase torque or change the speed and direction of rotation between two shafts.
Spur gears
Unit 6- spur gears, Kinematics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Gear measurements
This document discusses gear measurements and metrology. It defines key gear terminology such as pitch circle, pressure angle, addendum, dedendum, and circular pitch. It then describes methods for measuring gear concentricity using rollers or a projector. Alignment of individual teeth can be analyzed mathematically or through functional testing. Rolling gear tests using a Parkinson gear tester can efficiently measure variations in center distance to identify errors. Individual gear elements like tooth thickness are measured using methods like a gear tooth Vernier caliper or constant chord method.
Types of gears
Gears are used to transmit motion between rotating shafts and can change the speed and torque characteristics. The document discusses various types of gears including spur gears, helical gears, bevel gears, worm gears, and rack and pinion gears. It also covers planetary or epicyclic gears which are used in automatic transmissions to achieve large speed reductions in a compact space. Standard specifications for parameters like pressure angle, addendum, dedendum, and circular pitch are provided for designing gear teeth.
Viewers also liked (16)
Recently uploaded
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
AI assisted telemedicine KIOSK for Rural India.pptx
It gives the overall description of SIH problem statement " AI assisted telemedicine KIOSK for Rural India".
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering PROJECT REPORT ON SUMMER VOCATIONAL TRAINING
AT MBB AIRPORT
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
artificial intelligence and data science contents.pptx
What is artificial intelligence? Artificial intelligence is the ability of a computer or computer-controlled robot to perform tasks that are commonly associated with the intellectual processes characteristic of humans, such as the ability to reason.
› ...
Artificial intelligence (AI) | Definitio
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
Recently uploaded (20)
AI assisted telemedicine KIOSK for Rural India.pptx
AI assisted telemedicine KIOSK for Rural India.pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Mechanical Engineering on AAI Summer Training Report-003.pdf
Mechanical Engineering on AAI Summer Training Report-003.pdf
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
artificial intelligence and data science contents.pptx
artificial intelligence and data science contents.pptx
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
SAE STANDARD J/ISO 10567
- 1. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 2. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 3. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 4. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 5. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 6. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 7. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 8. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 9. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 10. Copyright by the SAE International Fri Apr 15 01:41:16 2011
- 11. Copyright by the SAE International Fri Apr 15 01:41:16 2011