Gears are components that transmit rotational motion between two shafts. There are several types of gears classified by the position of their shafts, including spur gears where the teeth are parallel to the axis of rotation, helical gears which are cut at an angle, and bevel gears where the shafts meet at an angle. Gears are used in many machines and mechanisms to increase torque or change the speed and direction of rotation between two shafts.
This presentation briefly tells about the classification of Gears. It includes information about spur, helical, bevel, herringbone, rack and pinion, internal and external gears.
This presentation briefly tells about the classification of Gears. It includes information about spur, helical, bevel, herringbone, rack and pinion, internal and external gears.
Unit 6- spur gears, Kinematics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Unit 7-gear trains, Kinematics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
This presentation contains basic idea regarding spur gear and provides the best equations for designing of spur gear. One can Easily understand all the parameters required to design a Spur Gear
Like Comment and download
Belt is a Flexible Mechanical element that transmit power from one shaft to another
Belt is a Flexible Mechanical element that transmit power from one shaft to another
Gear Train
Ex: Automobile, engines etc.
Chain Drive
Ex : Bi-cycle , Motor cycle etc.
Belt Drive
Ex: Rice mills, sewing machine etc.
Rope Drive
Ex: lift, crane etc
The gears are a type of mechanical element whose teeth are cut around a cylindrical or conical surface with the same space. It is used for the rotation and transmission of force from the drive shaft to the driven shaft when coupling a pair of elements. The gears can be classified into spiral, cycloid and trochoidal gears according to their shape. It can also be classified as parallel shaft gear, transverse shaft gear and non-parallel and non-transverse shaft gear depending on the position of the shaft.
PRESENTATION ON WORM GEAR FOR DESIGN OF MACHINE ELEMENT 2 BY :
Ranjan Rajkumar, Ranjan Leishangthem and Daihrii Kholi
of mechanical engineering Department, NATIONAL INSTITUTE OF TECHNOLOGY MANIPUR
Unit 6- spur gears, Kinematics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Unit 7-gear trains, Kinematics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
This presentation contains basic idea regarding spur gear and provides the best equations for designing of spur gear. One can Easily understand all the parameters required to design a Spur Gear
Like Comment and download
Belt is a Flexible Mechanical element that transmit power from one shaft to another
Belt is a Flexible Mechanical element that transmit power from one shaft to another
Gear Train
Ex: Automobile, engines etc.
Chain Drive
Ex : Bi-cycle , Motor cycle etc.
Belt Drive
Ex: Rice mills, sewing machine etc.
Rope Drive
Ex: lift, crane etc
The gears are a type of mechanical element whose teeth are cut around a cylindrical or conical surface with the same space. It is used for the rotation and transmission of force from the drive shaft to the driven shaft when coupling a pair of elements. The gears can be classified into spiral, cycloid and trochoidal gears according to their shape. It can also be classified as parallel shaft gear, transverse shaft gear and non-parallel and non-transverse shaft gear depending on the position of the shaft.
PRESENTATION ON WORM GEAR FOR DESIGN OF MACHINE ELEMENT 2 BY :
Ranjan Rajkumar, Ranjan Leishangthem and Daihrii Kholi
of mechanical engineering Department, NATIONAL INSTITUTE OF TECHNOLOGY MANIPUR
Law of toothed gearing – Involutes and cycloidal tooth profiles –Spur Gear terminology and
definitions –Gear tooth action – contact ratio – Interference and undercutting. Helical, Bevel, Worm, Rack and Pinion gears
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
2. GEAR
• Power transmission is the movement of energy
from its place of generation to a location where
it is applied to performing useful work
• A gear is a component within a transmission
device that transmits rotational force to another
gear or device
3. TYPES OF GEARS
1. According to the position of axes of the
shafts.
a. Parallel
1.Spur Gear
2.Helical Gear
3.Rack and Pinion
b. Intersecting
Bevel Gear
c. Non-intersecting and Non-parallel
worm and worm gears
4. SPUR GEAR
Teeth is parallel to axis
of rotation
Transmit power from
one shaft to another
parallel shaft
Used in Electric
screwdriver, oscillating
sprinkler, windup alarm
clock, washing machine
and clothes dryer
6. Helical Gear
The teeth on helical gears are cut at an angle
to the face of the gear
This gradual engagement makes helical gears
operate much more smoothly and quietly than
spur gears
One interesting thing about helical gears is
that if the angles of the gear teeth are correct,
they can be mounted on perpendicular shafts,
adjusting the rotation angle by 90 degrees
8. Herringbone gears
To avoid axial thrust, two
helical gears of opposite
hand can be mounted side
by side, to cancel resulting
thrust forces
Herringbone gears are
mostly used on heavy
machinery.
9. Rack and pinion
Rack and pinion gears
are used to convert
rotation (From the
pinion) into linear
motion (of the rack)
A perfect example of
this is the steering
system on many cars
10. Bevel gears
Bevel gears are useful when the direction of a shaft's
rotation needs to be changed
They are usually mounted on shafts that are 90
degrees apart, but can be designed to work at other
angles as well
The teeth on bevel gears can be straight, spiral or
hypoid
locomotives, marine applications, automobiles,
printing presses, cooling towers, power plants, steel
plants, railway track inspection machines, etc.
12. WORM AND WORM GEAR
Worm gears are used when large gear reductions are
needed. It is common for worm gears to have
reductions of 20:1, and even up to 300:1 or greater
Many worm gears have an interesting property that
no other gear set has: the worm can easily turn the
gear, but the gear cannot turn the worm
Worm gears are used widely in material handling
and transportation machinery, machine tools,
automobiles etc
14. GEAR TRAINS
A gear train is two or more gear working
together by meshing their teeth and turning
each other in a system to generate power and
speed
It reduces speed and increases torque
Electric motors are used with the gear systems
to reduce the speed and increase the torque
15. Types of Gear Trains
Simple gear train
Compound gear train
Planetary gear train
Simple Gear Train
The most common of the gear train is the gear pair
connecting parallel shafts. The teeth of this type can
be spur, helical or herringbone.
Only one gear may rotate about a single axis
19. NOMENCLATURE….
• Pitch surface: The surface of the imaginary rolling cylinder
(cone, etc.) that the toothed gear may be considered to replace.
• Pitch circle: A right section of the pitch surface.
• Addendum circle: A circle bounding the ends of the teeth, in
a right section of the gear.
• Root (or dedendum) circle: The circle bounding the spaces
between the teeth, in a right section of the gear.
• Addendum: The radial distance between the pitch circle and
the addendum circle.
• Dedendum: The radial distance between the pitch circle and
the root circle.
• Clearance: The difference between the dedendum of one gear
and the addendum of the mating gear.
20. NOMENCLATURE….
• Face of a tooth: That part of the tooth surface lying outside
the pitch surface.
• Flank of a tooth: The part of the tooth surface lying inside the
pitch surface.
• Circular thickness (also called the tooth thickness): The
thickness of the tooth measured on the pitch circle. It is the
length of an arc and not the length of a straight line.
• Tooth space: pitch diameter The distance between adjacent
teeth measured on the pitch circle.
• Backlash: The difference between the circle thickness of one
gear and the tooth space of the mating gear.
• Circular pitch (Pc) : The width of a tooth and a space,
measured on the pitch circle. D
P
c
N
21. NOMENCLATURE….
• Diametral pitch (Pd): The number of teeth of a gear unit pitch
diameter. The diametral pitch is, by definition, the number of
teeth divided by the pitch diameter. That is,
Where Pd
N
D
Pd = diametral pitch
N = number of teeth
D = pitch diameter
• Module (m): Pitch diameter divided by number of teeth. The
pitch diameter is usually specified in inches or millimeters; in
the former case the module is the inverse of diametral pitch.
m = D/N
22. VELOCITY RATIO OF GEAR
DRIVE
d = Diameter of the wheel
N =Speed of the wheel
ω = Angular speed
2 N2 d1
velocity ratio (n) =
1 N1 d2
24. Planetary Gear Train…
• In this train, the blue gear has six times the diameter
of the yellow gear
• The size of the red gear is not important because it is
just there to reverse the direction of rotation
• In this gear system, the yellow gear (the sun) engages
all three red gears (the planets) simultaneously
• All three are attached to a plate (the planet carrier),
and they engage the inside of the blue gear (the ring)
instead of the outside.
25. Planetary Gear Train…
• Because there are three red gears instead of
one, this gear train is extremely rugged.
• planetary gear sets is that they can produce
different gear ratios depending on which gear
you use as the input, which gear you use as the
output, and which one you hold still.
26. Planetary Gear Train…
• They have higher gear ratios.
• They are popular for automatic transmissions
in automobiles.
• They are also used in bicycles for controlling
power of pedaling automatically or manually.
• They are also used for power train between
internal combustion engine and an electric
motor
27. Short Quetions
• What is power transmission?
• Why gear drives are called positively driven?
• What is backlash in gears?
• What are the types of gears available?
• What is gear train? Why gear trains are used?
• Why intermediate gear in simple gear train is called idler?
• What is the advantage of using helical gear over spur gear?
• List out the applications of gears
• Define the term ‘module’ in gear tooth
• What is herringbone gear?
28. Essay type questions
• With sketch explain various types of gears
• With sketch explain three types of gear trains
• With neat sketch explain the nomenclature of
spur gear
• Write the applications, advantages and
disadvantages of gear drives