The document discusses the regulatory aspects of pharmaceutical change control systems. It outlines the benefits of a change control system, including ensuring changes are properly documented, validated, approved and traceable. It describes the different categories of changes (major, moderate, minor) and approval processes. A successful change control system requires identifying the need for a change, reviewing documentation, preparing a change proposal, classifying and approving the change, developing an implementation plan, verification and closure. Regulatory guidelines require formal change control systems to evaluate all changes that could affect product quality or manufacturing processes.
Introduction, Regulatory requirements for validation, Role of FDA, Code of Federal regulation, Validation life cycle, Significance of validation, Types of validation, Process valiadation, Phases of process validation, Process capability design, Process Qualification, Validation maintainance phase
Types of Process validation, Examples
According to new syllabus of PCI M.Pharm 1st sem. students can directly utilize this ppt for their study. As per PCI new syllabus QA STUDENTS find this ppt very use full.
Validation: Validation is a documented program that provides high degree of assurance that a specific process, method or system consistently produces a result meeting pre-determined acceptance criteria.
Introduction, Regulatory requirements for validation, Role of FDA, Code of Federal regulation, Validation life cycle, Significance of validation, Types of validation, Process valiadation, Phases of process validation, Process capability design, Process Qualification, Validation maintainance phase
Types of Process validation, Examples
According to new syllabus of PCI M.Pharm 1st sem. students can directly utilize this ppt for their study. As per PCI new syllabus QA STUDENTS find this ppt very use full.
Validation: Validation is a documented program that provides high degree of assurance that a specific process, method or system consistently produces a result meeting pre-determined acceptance criteria.
Originally presented with Melanie Mathos at The Blackbaud Conference for Nonprofits, 50 Social Media Tactics is a set of ideas that can help nonprofits meet their social media objectives. Learn more & buy the book: http://www.101.smt.com.
The Health and Social Care Act (2012) paved the way for far-reaching reforms to how patient care in the English NHS is organised, managed and delivered. The changes were formally implemented on 1 April 2013.
This slideshow outlines the main changes to management, accountability and funding structures resulting from the Act.
The first slides show the old and new structure in overview, together with a slide detailing the transitional arrangement. Further slides compare the earlier arrangements that were in place for funding, regulation and monitoring, advice and performance management, and patient and public participation, with the new system at both the national and local level. The final slide outlines the new medical education and training arrangements.
You are welcome to download and use individual slides in your own presentations providing suitable acknowledgement is given.
To find out more about our work on the NHS reforms, visit our dedicated project page. You can also access an interactive timeline showing the complete history of the NHS, putting the current reforms in historical context.
Development and Engagement in the Age of Social Media Paul Brown
Originally presented to the professional staff at the University of Dayton in January of 2016. Reviews aspects of college student development online and how to engage college students.
How to Combine SEO, Blogging, and Social Media For Results HubSpotHubSpot
Finished with the basics of Search Engine Optimization? Ready to take it to the next level? Did you know your SEO strategy should use social media to build link authority? And that your social media strategy should leverage your blog content? And that your blog strategy should be guided by your SEO results? Learn how you can use blogging, social media and SEO together for even better results than any technique alone.
This slideshare highlights 40 mini case studies of businesses in Singapore that have stood out by implementing creative social media marketing campaigns.
Still, as a continuation of the previous work done on the subject, in this deck we explore and relate how body language is applied in social settings.
Specifically, there are 4 areas discussed here - proxemics (personal space), seating arrangements, dating & courtship, as well as body pointing.
Enjoy!
I'll be glad if I could get some comments from you after you've looked at it!
A Guide to Social Media Marketing MeasurementMark Schaefer
Stuck on how to measure your social media marketing efforts? Here's practical advice from a leading marketing authority that may help you move forward.
10 Steps to a Successful Social Media Marketing StrategyJeff Bullas
Social media marketing success is something that business is now starting to see as vital as part of their marketing plans. Just having a Facebook page or a Twitter account is just the start. Planning and creating a strategy is vital if you want to succeed long term. In this presentation we look at the 10 steps you need to implement. We also look at some specific tactics and case studies of brands and businesses that have been successful at social media marketing.
All request please fwd to wah17@yahoo.com.My linkedin is wah17@yahoo.com.A copy of the full research is here:
http://www.scribd.com/share/upload/4814477/2dx6gqho7w9gwvvrwbhq
6 Questions to Lead You to a Social Media StrategyMark Schaefer
It can be intimidating and overwhelming to try to develop a social media strategy, but if you follow through on these six questions, your strategy will reveal itself.
This is a presentation based on ICH Q10, Pharmaceutical Quality System, It was shared recently with participants of a training session arranged by Ingrope Information Services karachi at marriot Hotel. I am uploading for the benefits of all pharma colleagues, specially the junior ones.
A presentation of Pharmaceutical Quality System ICH Q 10 Model. This presentation was shared lately in a session arranged ny Ingrope Information Services, Karachi, at Marriot Hotel.
Fundamental knowledge on pharmaceutical
product development and translation from laboratory to market.
Quality management systems: Quality management & Certifications.
Introduction to Change Control.
Definition of Change Control.
Function of Change Control.
Area of Change.
Written Procedures and Documentation.
Specific Detailed Changes to the New ISO 13485:2016Greenlight Guru
Today's medical device regulatory environment is changing faster than ever. Keeping up can be daunting. The new quality management standard ISO 13485:2016 was published in Q1 of 2016.
greenlight.guru has partnered with special guest and consultant, Mark Swanson, to keep you ahead of these changes.
Mark spent the last 4 years on the working group that revised the new ISO 13485.
Mark has all the exclusive insider knowledge on the changes you want. And he's going to be sharing it with you for free.
(You can view the full webinar here: http://www.greenlight.guru/webinar/iso-13485-2016-changes)
In this webinar you'll learn specifically:
-How to prepare for the coming regulatory changes with ISO 13485:2016
-How to apply risk based thinking to your quality processes to ensure compliance
-What you need to know about the design control updates
-How to incorporate ISO 9001:2015 and 13485:2016 to your supplier controls
-A general overview of the standard and its most significant changes (before anyone else)
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
2. CHANGE CONTROL
A process that ensures that changes to materials,
methods, equipment and software are properly
documented, validated, approved and traceable.
The process includes evaluation to determine
whether validation is required and the level of
validation required.
3. BENEFITS OF CHANGE CONTROL
SYSTEM
Careful planning helps to ensure that the change
process is started and managed by the right people
at the right time
Planned change management allows you to include
specific tasks and events that are appropriate for
each stage in the change process
Change management ensures that customers,
suppliers and other stakeholders understand and
support the change
Change control reduces disruptive aspects and
emphasizes positive opportunities in the change
process
Change control allows easy tracking of changes
and compliance to FDA regulations.
4. Applying these steps, the system can be
designed for managing the configuration
and controlling the change, and then the
necessary procedures and forms can be
prepared. It is important that the system
design come first. Specifically:
Identify the change to be made
Accumulate and review the baseline
documentation, including drawings,
procedures, P&IDs, equipment data sheets
and MOC forms.
5. MANAGEMENT OF CHANGE AND
CONTINUOUS IMPROVEMENT
Changes to process, equipment, procedures, technology,
material and organization are necessary for continuous
improvement and a MOC system must also be
continuously improved. The process requires eight basic
steps:
Identification
Documentation review
Change proposal
Change classification
Implementation plan
Installation
Verification
Closure
6. PREPARE A CHANGE PROPOSAL
used to document the changes in the specific
application area.
It is assigned a change proposal number, identifies
approval authority, defines security, and establishes
issued date, effective date, and distribution.
The baseline configuration and documentation are
verified.
From this point on, the change proposal must be
controlled throughout the lifecycle.
7. CLASSIFY & APPROVE PROPOSED CHANGES
The Change Control Board must review, evaluate,
and approve changes and then classify the change
as minor, moderate and major.
DEVELOP AN IMPLEMENTATION PLAN
The implementation plan describes how the change
will be put in place.
Baseline documentation is updated.
Operators and maintenance personnel are trained
in the change.
8. INSTALL THE CHANGE
This step speak for itself.
VERIFY INSTALLATION
Verify that each step in the process is completed
and the documentation matches the “as-built”
configuration.
Conduct a system audit.
CLOSE OUT THE CHANGE
Everything is completed and the cycle is repeated
for the next proposed change.
9. Managing change requires that the purpose
and justification of the change be
documented; change be reviewed for
impact on safety, health and environment;
cGMPs be reviewed for impact on GMP
values; additional risk is not introduced into
the process; authorization be documented;
process information be updated; operating
and maintenance procedures be revised;
personnel who are affected by the change
be trained; and configuration of the plant be
maintained.
11. HANDLING AND CONTROLLING
CHANGES-
Handling and controlling change, initiator call for a
meeting of change control team and puts the proposal
for change with the problems and consequences and
advantages.
Team reviews-
Should the change be allowed?
Partly or Wholly?
Regulatory impact?
GMP & safety impact?
Need for requalification or revalidation?
Customer/ Agency to be informed?
Category of the change? Reporting category?
Documentation requires & documents affected?
12. If the team has decided on above points, the CCIF
(change control initiation form) is processed by the
team members for a sign-off & each member
understands her/his responsibilities.
the initiator coordinates the change process at all
levels.
QA checks the adequacy of the process data,
impact and follow up closure and communicates to
the customers/clients and management.
Regulatory prepares the reporting document for the
agency.
13. SOP ON CHANGE CONTROL
The purpose of this SOP is to describe in detail the
change control process flow, starting with a request for a
change following necessary assessments and
approvals.
This standard process ensures that all planned changes
related to any aspect of manufacture, testing and
distribution are reviewed, assessed and approved by
technical and quality competent site personnel, which
includes Quality Assurance.
The main task is to evaluate potential impacts followed
by correlative consequences of the requested change
on product quality, current Good Manufacturing Practice
(cGMP), including qualification and validation and the
regulatory file/dossier before approval and
implementation of a change control request.
14. This procedure applies to all new and existing
manufacturing/packaging processes, utilities, major
equipment, computerized systems, facilities, drug
products, drug substances, medical devices, raw
materials, components, testing requirements,
specifications and systems for marketed products
and clinical trials (clinical, preclinical and stability
with GMP implications). Documents and systems
that may be impacted by a given change in any of
these areas include, but are not limited to, all
master documents, Marketing Authorization
Applications (MAA‟s), New Drug Applications
(NDA‟s), validation, stability protocols and control
systems.
15. Company Name Page
Department SOP No.+ Version No.
Change Control Supersedes: SOP No.
Attachments:
Effective date: DD/MM/YYYY
1. Regulatory Basis, Reference Documents
CFR 314.70 “Supplements and other changes to an
approved application”
Commission Regulation EC 541/95 “Variation to
the terms of a marketing authorization
ISO 9004 08.8 Design Change Control
11.6 Process Change Control
16. PIC – PH 1/96
ICH Q7A chapter 13 „Change Control‟
2. PURPOSE
The purpose of this SOP is to describe in detail the
change control process flow, starting with a request
for a change following necessary assessments and
approvals.
This standard process ensures that all planned
changes related to any aspect of manufacture,
testing and distribution are reviewed, assessed and
approved by technical and quality competent site
personnel, which includes Quality Assurance.
17. The main task is to evaluate potential impacts
followed by correlative consequences of the
requested change on product quality, current Good
Manufacturing Practice (cGMP), including
qualification and validation and the regulatory
file/dossier before approval and implementation of a
change control
3. SCOPE
This procedure applies to all new and existing
manufacturing/packaging processes, utilities, major
equipment, computerized systems, facilities, drug
products, drug substances, medical devices, raw
materials, components, testing requirements,
specifications and systems for marketed products
and clinical trials (clinical, preclinical and stability
with GMP implications).
18. Documents and systems that may be impacted by a
given change in any of these areas include, but are
not limited to, all master documents, Marketing
Authorization Applications (MAA‟s), New Drug
Applications (NDA‟s), validation, stability protocols
and control systems.
4. RESPONSIBILITIES AND ACCOUNTABILITIES
4.1 Applicant/Change requester
As a matter of principle every individual who had
been trained on the change control SOP should use
the change control form attached to this SOP to
request a change
19. CATEGORY OF CHANGES
Impact assessment of changes is extremely
important to the agency & changes are outlines as
Major, Moderate & Minor.
A compliance of regulatory group within the
company determines the filing impact and submits it
to FDA,-
A Prior- Approval Supplement (PAS) for major
changes,
A CBE -30 or CBE-0 for moderate changes or
Annual report for Minor changes.
20. MAJOR CHANGES-
Is likely to have a detectable impact on the critical
attributes of the product, significantly.
Could shift the process in a discernible manner ( Such
as: quality, yield, stability, impurity profile, crystal form,
particle size, bulk density)
Warrants definite additional/ major testing & suitable
revalidation studies to justify changes.
Reviewed by QA at the facility level & approved by
corporate groups.
Requires prior FDA approval.
Eg. Change in equipment type ( Dryer, configuration,
Blender type, crystallizer type, tablet compression
machine, coating equipment)
Revision of standard test procedure for assay
(potentiometric to HPLC) for related substance ( TLC to
HPLC), for residual solvents (GC to Head space)
21. Change work flow task from initiation to closure from traceable
authenticity
22. MODERATE CHANGES-
Is usually for improvements to process, materials,
product or procedure
Therefore, no reason to wait for approval
Does not require prior approval by regulatory /FDA
before implementation
The agency will want to review it
Can go in annual report to FDA
Can be evaluated by QA, at the facility & then approved
by corporate groups.
These are called “ change being effected”
Categories are CBE-30 & CBE-0
Eg. Improvement in yield
Improvement in critical quality
23. MINOR CHANGES
Is unlikely to have a detectable impact on the
critical attributes of the products.
Does not shift the process in any discernible
manner
Can be implemented with minimal testing and
revalidation
Can be reviewed and approved by QA at the facility
level
Is reported in annual reports to FDA and does not
require FDA approval
Eg. Like for like equipment replacement
Noncritical process parameter
24.
25. When developing a change control procedure
following points must be considered
Developing a robust change control system
Educate users of the change control system, and
Enforce change control system policies and
procedures
26. ENSURING TRAINING & PROCEDURES IN A
MANAGEMENT OF CHANGE PROGRAM
Training in change is required for all changes in process
and operation; technology; facilities and equipment; and
procedures.
It may be as simple as reading and initialing simple
changes in a procedure if it does not affect skills or
knowledge. In other cases, it could require developing
new lesson plans to teach the new skills and knowledge,
or developing and delivering structured on-the-job
training.
Reinforcement training, an FDA requirement, is targeted
for performers to maintain their skills and knowledge.
Training in change should be critical and may cover
much of the reinforcement training.
27. LEVEL OF APPROVAL-
The change control proposals are formal
documents and must be initiated by the affected
group. For eg production unit is the effected group
for changes to equipment and facility expansion. in
this eg, production unit will initiate the change
proposal
This proposal could reviewed and discussed by
other responsible persons from departments, such
as R & D ,QA ,Regulatory and affected client.
However, the final approval is granted by Quality
Unit.
28. Assign levels of approval within departments for
changes
Categorized as major, the review and approval
must be dealt with by senior experts from
stakeholder department and Quality Unit.
In contrast ,for the change categorized as Minor,
the review and approvals can be delegated to
trained personnel who are not necessarily from
senior management.
Once a manual process has been implemented,
one of the stakeholder groups such as Regulatory
needs to conduct an internal audit once a year.
When all of the pieces, are in place, change control
process /program will provide the ability to submit,
evaluate, approve, communicate, correctly
implement and document all change that impact
SQIPP.
29. REGULATOR PROSPECTIVE OF CHANGE
CONTROL
Considering the regulatory prospective of change control
procedures, it is important to note that there are many
guideline which describe the control of changes in
manufacturing few references includes
21 CFR Part 211: Sec. 211.100
There shall be written procedure for production and
process control designed to ensure that the drug product
have the identity, strength, quality and purity. They
purport or are represents to process.
These written procedure, including any changes, shall we
drafted, reviewed, and appointed by the appropriate
organizational units & reviewed & approved by the quality
control unit.
30. 21 CFR Part 211.194 (Laboratory Records)
Complete record shall be maintained of any modification of an
established method employed in testing. Such records shall
include the reason for the modification & data to be verify that
the modification produced results that are at least as accurate
& reliable for the material being tested as established method.
ICH Q7A
A formal change control system should be established to
evaluate all changes that could affect the production & control
of the intermediate or API. Written procedures should provide
for the identification, documentation, appropriate review, &
approval of changes in raw materials, specifications, analytical
methods, facilities, support systems, equipment, processing
steps, labeling & packaging materials & computer software.
31. USFDA Guidance for Industry: Change to an
approved NDA or ANDA ( April 2004- Revison-1)
This guidance provides recommendations to holders of
new drug applications (NDAs) & ANDAs who intend to
make post approval changes in accordance with section
506A of federal Food, Drug & Cosmetic Act ( the act) &
$314.70 (21 CFR 314.70)
The guidance covers recommended reporting categories
for post approval changes for drugs other than specific
biotechnology & specified synthetic biological products.
32. CONCLUSION-
Change is inevitable, and because continuous
improvement is impossible without change, progress is
built on change.
The key to making successful change in the
pharmaceutical world is to manage it, both from internal
and external perspectives.
Changes can happen at any time during a product‟s
lifecycle. The impact of the change needs to be balanced
against the cost of making the change (safety, time and
money).
Impact of change may require amendments to registered
details. Changes must be formally documented and
approved via a change control process. It needs to
evaluate risk assessments throughout change control
process.
33. REFERENCE-
1. Change Control in the FDA-regulated Industry,
http://www.metricstream.com/insights/chg_ctrl_FDA.htm
2. "Guidance for Industry: Quality Systems Approach to
Pharmaceutical CGMP Regulations"(PDF). U.S. Food and
Drug Administration. September 2006.
http://www.fda.gov/downloads/Drugs/GuidanceComplianceR
egulatoryInformation/Guidances/UCM070337.pdf.
3. Infusion. "Challenges of Change Control in a Regulated
Industry". http://www.infinityqs.com/asset-
library/articles/ChangeControlChallenges.pdf.
4. ICH. "Q7: Good Manufacturing Practice Guide for Active
Pharmaceutical Ingredients".
http://www.ich.org/fileadmin/Public_Web_Site/ICH_Products/
Guidelines/Quality/Q7/Step4/Q7_Guideline.pdf.
5. “Change management methods and implementation best
practices”
http://www.itsm.info/ITSM%20Change%20Management%20
Best%20Practices.pdf
34. 6. “Standard operating procedure SOP-Pharma”
http://www.gmp-online-
consultancy.com/standard_operation_procedure.htm
7. “Change of Control”http://www.gmp-online-
consultancy.com/e/info_preview/Change_Control_V2_P3.p
df
8. “Pharmaceutical change control”
http://www.pigmp.com/pdf/pharmaceutical-change-
control.pdf
9. U.S. Food and Drug Administration, 21 CFR Part 314.70,
Supplements and other changes to an Approved
Application, Revised as of April 1, 2000.
10. U.S. Food and Drug Administration, 21 CFR Part 211,
Current Good Manufacturing Practice for Finished
Pharmaceuticals.
11. U.S. Food and Drug Administration, Compliance Program
Guidance Manual 7346.832, Preapproval
Inspections/Investigations.
12. U.S. Food and Drug Administration Modernization Act of
1997, Public Law 105-115, 105th Congress.
35. 13. U.S. Food and Drug Administration, Center for Drugs and
Biologics and Center for Devices and Radiological Health,
Guideline on General Principles of Process Validation.
14. Parenteral Drug Association, Current Practices in the
Validation of Aseptic Processing, 2001, Technical Report No.
36.
15. “ICH Q10 Pharmaceutical Quality System”
http://www.ich.org/fileadmin/Public_Web_Site/
GMP_Inspector_perspective.pdf
16. “GOOD LABORATORY PRACTICE (GLP)”
http://apps.who.int/tdr/... /good-laboratory-practice-
handbook/pdf/glp-handbook.pdf
17. Change Control – Perspective from a Pharmaceutical
Company,
http://www.ipacrs.com/PDFs/SQC%2028%20May/Riddell.pdf
18. “Management of change”
http://www.pharmamanufacturing.com/articles/2008/057.html?
page=2