presentation_soft_tissue_neck_(upper_airway)_radiography_1689575941_390760.pptx
•Download as PPTX, PDF•
0 likes•3 views
The document discusses how to take x-ray images of the soft tissue neck region. It describes taking both AP (anterior-posterior) and lateral views with the patient standing erect. For the AP view, the central ray is directed horizontally at a 15-20 degree angle at the C4 vertebra level. For the lateral view, the central ray is directed horizontally at the C4 level. Exposure settings are provided for both views when using an 8"x10" or 10"x12" cassette at 100cm SID, with no grid, 200mA, 12-16mAs, and 40-45kVp.
Report
Share
Report
Share
Recommended
Soft tissue neck (upper airway) radiography
The document discusses radiographic imaging of the soft tissue neck. It describes how to position patients for anterior-posterior (AP) and lateral x-ray views of the neck. For AP views, the patient stands facing the cassette with their midline and cervical spine centered, shoulders level, neck extended, and chin tucked. The central ray is directed horizontally at the C4 vertebra level. Lateral views require similar positioning but with the patient's side facing the cassette. Exposure parameters are also provided.
CHEST RADIOGRAPHY - Routine & special radiographs
Dear friends
It is beneficial for the students of diploma, graduates and masters. It contains complete radiographic views of chest radiography-routine &special. I think that it will helpful for your study and practical knowledge. You can read through this ppt and apply on your practice and get better images according this way. Thanks
Sella Turcica (RAD32)
The document provides information about performing a PA projection radiograph of the sella turcica. It states that the patient should be positioned prone with their forehead and nose resting against the image receptor. The central ray should be directed at the glabella at a 10 degree angle cephalad. Structures that should be demonstrated include the dorsum sellae, tuberculum sellae, anterior and posterior clinoid processes, and frontal bone. Evaluation criteria include the cranium being seen without rotation and symmetrical petrous bones.
NASAL BONE VIEW.pptx
medical radiographic view of nasal bone
The lateral nasal bones view is a nonangled lateral radiograph showcasing two small oblong bones situated side by side, together forming the nasal ridge.
Indications
This view is often primarily used in assessing various nasal bone fractures in the trauma setting. Depending on the department, this view may be done bilaterally (for comparison of affected versus unaffected side) or unilaterally (only affected side).
Patient position
rest the lateral aspect of the patient's head (with the side of interest) against the image detector
adjust the head into a true lateral position, with the midsagittal plane (Figure 1) parallel to the image detector
for patient's comfort, adjust the patient's body into an oblique position
Technical factors
lateral projection
centering point
1.25 cm inferior to nasion
collimation
within 5 cm of the nasal bones on all sides 1
orientation
for unilateral side: portrait
for bilateral side: landscape
detector size
24 cm x 18 cm
exposure
60-70 kVp
5-10 mAs
SID
100 cm
grid
no
Image technical evaluation
nasal bones with soft tissue nasal structure, frontonasal suture (superior) and anterior nasal spine should be demonstrated
nasal bones should be seen with no rotation
Practical points
remove glasses and nose piercings to avoid artefact obscuring important pathology
this view should not replace a lateral facial bones x-ray
as this projection is often requested together with a facial bones series 3, there may be the temptation to combine the request and only image a lateral facial bones x-ray as per ALARA. However, nasal bones and their soft tissue nasal structures are less dense compared to the denser facial bones and should hence be imaged separately to prevent over exposure of the less dense region
Thoracic positioning
Chest x-rays are commonly used to examine the lungs but have limitations as they provide a 2D image of a 3D structure. It is important to follow proper protocol for chest x-ray imaging including checking patient details, film quality, inspiration level, and positioning. Key aspects of positioning involve ensuring proper centering, angles, and inspiration to obtain quality images and accurately interpret findings. Following standardized guidelines is vital for consistent and accurate chest x-ray interpretation.
Positions
The document discusses various radiographic positioning techniques for imaging different anatomical areas and structures. It provides descriptions of positioning for paranasal sinus views, chest x-rays, spine views, shoulder views including scapula, wrist, hand, elbow, hip, knee and tibia/fibula views. For each area, it specifies the patient positioning, central ray direction, and structures that should be demonstrated in the resulting radiographic image.
Anatomy and Radiography of shoulder and arm
The document discusses the anatomy and radiography of the shoulder and arm. It describes the anatomy of the shoulder girdle including the clavicle and scapula. It then discusses various radiographic views of the shoulder including the AP view with the patient supine or seated. Lateral views are taken with the patient standing and arm abducted. The anatomy of the humerus is also described along with common radiographic views like AP and lateral with the patient supine or erect.
RADIOGRAPHY OF CHEST AND SPINE
This document provides guidance on performing and interpreting chest radiography and radiography of the thoracic and lumbar spine. It outlines key points to note on chest x-rays including patient data, technical quality factors, and anatomical structures to evaluate. Recommended projections for chest x-rays are described along with positioning details. Projections for thoracic and lumbar spine radiography are also outlined, including positioning instructions. Technical factors for the various projections are specified.
Recommended
Soft tissue neck (upper airway) radiography
The document discusses radiographic imaging of the soft tissue neck. It describes how to position patients for anterior-posterior (AP) and lateral x-ray views of the neck. For AP views, the patient stands facing the cassette with their midline and cervical spine centered, shoulders level, neck extended, and chin tucked. The central ray is directed horizontally at the C4 vertebra level. Lateral views require similar positioning but with the patient's side facing the cassette. Exposure parameters are also provided.
CHEST RADIOGRAPHY - Routine & special radiographs
Dear friends
It is beneficial for the students of diploma, graduates and masters. It contains complete radiographic views of chest radiography-routine &special. I think that it will helpful for your study and practical knowledge. You can read through this ppt and apply on your practice and get better images according this way. Thanks
Sella Turcica (RAD32)
The document provides information about performing a PA projection radiograph of the sella turcica. It states that the patient should be positioned prone with their forehead and nose resting against the image receptor. The central ray should be directed at the glabella at a 10 degree angle cephalad. Structures that should be demonstrated include the dorsum sellae, tuberculum sellae, anterior and posterior clinoid processes, and frontal bone. Evaluation criteria include the cranium being seen without rotation and symmetrical petrous bones.
NASAL BONE VIEW.pptx
medical radiographic view of nasal bone
The lateral nasal bones view is a nonangled lateral radiograph showcasing two small oblong bones situated side by side, together forming the nasal ridge.
Indications
This view is often primarily used in assessing various nasal bone fractures in the trauma setting. Depending on the department, this view may be done bilaterally (for comparison of affected versus unaffected side) or unilaterally (only affected side).
Patient position
rest the lateral aspect of the patient's head (with the side of interest) against the image detector
adjust the head into a true lateral position, with the midsagittal plane (Figure 1) parallel to the image detector
for patient's comfort, adjust the patient's body into an oblique position
Technical factors
lateral projection
centering point
1.25 cm inferior to nasion
collimation
within 5 cm of the nasal bones on all sides 1
orientation
for unilateral side: portrait
for bilateral side: landscape
detector size
24 cm x 18 cm
exposure
60-70 kVp
5-10 mAs
SID
100 cm
grid
no
Image technical evaluation
nasal bones with soft tissue nasal structure, frontonasal suture (superior) and anterior nasal spine should be demonstrated
nasal bones should be seen with no rotation
Practical points
remove glasses and nose piercings to avoid artefact obscuring important pathology
this view should not replace a lateral facial bones x-ray
as this projection is often requested together with a facial bones series 3, there may be the temptation to combine the request and only image a lateral facial bones x-ray as per ALARA. However, nasal bones and their soft tissue nasal structures are less dense compared to the denser facial bones and should hence be imaged separately to prevent over exposure of the less dense region
Thoracic positioning
Chest x-rays are commonly used to examine the lungs but have limitations as they provide a 2D image of a 3D structure. It is important to follow proper protocol for chest x-ray imaging including checking patient details, film quality, inspiration level, and positioning. Key aspects of positioning involve ensuring proper centering, angles, and inspiration to obtain quality images and accurately interpret findings. Following standardized guidelines is vital for consistent and accurate chest x-ray interpretation.
Positions
The document discusses various radiographic positioning techniques for imaging different anatomical areas and structures. It provides descriptions of positioning for paranasal sinus views, chest x-rays, spine views, shoulder views including scapula, wrist, hand, elbow, hip, knee and tibia/fibula views. For each area, it specifies the patient positioning, central ray direction, and structures that should be demonstrated in the resulting radiographic image.
Anatomy and Radiography of shoulder and arm
The document discusses the anatomy and radiography of the shoulder and arm. It describes the anatomy of the shoulder girdle including the clavicle and scapula. It then discusses various radiographic views of the shoulder including the AP view with the patient supine or seated. Lateral views are taken with the patient standing and arm abducted. The anatomy of the humerus is also described along with common radiographic views like AP and lateral with the patient supine or erect.
RADIOGRAPHY OF CHEST AND SPINE
This document provides guidance on performing and interpreting chest radiography and radiography of the thoracic and lumbar spine. It outlines key points to note on chest x-rays including patient data, technical quality factors, and anatomical structures to evaluate. Recommended projections for chest x-rays are described along with positioning details. Projections for thoracic and lumbar spine radiography are also outlined, including positioning instructions. Technical factors for the various projections are specified.
Technique skull x ray
Skull x ray technique and positioning for diagnosis imaging , brief explanation, if there is error in power point it was my fault in presentation
Basic Chest X ray Views - AP, PA & Lateral etc . pptx
PA PROJECTION
Sit or stand upright.
Positioned to minimize magnification of the anteriorly positioned heart and consequent obscuration of the lungs.
Make sure the patient is standing straight and is equally distributing the weight of the body on both feet.
The upright position is preferred for the following reasons: It prevents engorgement (an excess of blood) of pulmonary vessels.
It allows full expansion of the lungs
To visualize possible air and fluid levels in the chest.
An upright chest film is preferred over an upright abdominal film for the diagnosis of pneumoperitoneum (free air in the abdominal cavity).
Ask the patient to move the shoulders forward and downward, so that the chest wall and both shoulders are in contact with the cassette. This helps to carry the clavicles below the lung apices.
It is very important to minimize breast shadows.
Ask the patient to pull the breasts upward and laterally (outwards), then remove her hands as she leans against the cassette holder to keep them in position.
Rotation
Even a small degree of rotation distorts the mediastinal borders, and the lung nearest the film will appear less translucent.
The following points should be stressed to obtain a true PA view (without rotation):
Ensure that the patient is standing evenly on both feet.
Both shoulders should be rolled forward and downward.
The chest radiograph should be well centred so that the medial ends of the clavicle are equidistant from the vertebral spinous processes at T4/5.
CENTRAL RAY
Over T7 vertebra
SID: 72 inches
Central ray
Film holder (image receptor) placement
The horizontal dimension of an average chest is greater than the vertical dimension.
This requires that a 14 x 17-inch film holder or image receptor (IR) be placed crosswise.
Or lengthwise depending on body type.
Collimation
The upper border of the illuminated field should be at the level of vertebra prominence (4 cm above the apex of lungs).
This will result in a lower collimation border of 1-2 inches below the costophrenic angle, if the central ray was correctly centred.
A general rule for average adult patients is to show a minimum of 10 ribs on a good PA chest radiograph.
Evaluation criteria for a good PA projection
Entire lung fields from apices to costophrenic angles should be clearly demonstrated.
No rotation. (both the right and left sternal ends of the clavicle will be the same distance from the center line of the spine.)
The direction of rotation can be determined by which sternal end of the clavicle is closest to the spine.
Trachea is visible in midline.
Scapula projected outside the lung fields.
Ten posterior ribs are visible above the diaphragm.
There is a sharp outline of the heart and diaphragm.
A faint shadow of the ribs and superior thoracic vertebrae is visible through the heart shadow.
Lung markings are visible from the hilum to the periphery of the lung.
Variations
An expiratory film may be helpful under some circumstances.
X-RAY PELVIS PROJECTIONS
This document provides an overview of various pelvis x-ray projections, including their purposes, patient positioning, technical factors, and image evaluation criteria. It describes the anteroposterior (AP), inlet, outlet, Judet, and flamingo projections. The AP view examines the pelvic ring and bones. The inlet is perpendicular to the pelvic rim. The outlet assesses cephalad/caudal translation following trauma. The Judet views the acetabulum. And the flamingo series evaluates pubic symphysis instability with the patient in neutral, left foot raised, and right foot raised positions. Proper collimation, centering, orientation and other technical parameters are outlined for each view.
Positioning and radiographic anatomy of the skull
This document provides information on positioning and radiographic anatomy of the skull. It discusses the anatomy of the skull and lists the 8 cranial bones. It then describes various positioning considerations for skull radiography including erect vs recumbent positioning, patient comfort, hygiene, exposure factors, SID and radiation protection. Several common skull radiographic projections are outlined including the AP, lateral, PA, submentovertex and oblique projections. For each projection, the demonstrated pathology, positioning, central ray angle and structures shown are described.
skull presentation by neha singh.pptx
This document provides information on cranium views in radiography, including surface landmarks, baseline positions, tube angulation, patient preparation, basic views like frontal, lateral, and occipital, and special views like Caldwells, Towns, and sub-mento vertical. It describes the positioning, centering, and technical factors for each view. The purpose is to demonstrate the proper technique for obtaining diagnostic cranium radiographs.
SHOULDER JOINT
The document discusses various radiographic views of the shoulder joint including the glenohumeral joint, acromioclavicular joint, clavicle, and scapula. Standard anteroposterior, superoinferior, outlet, and stress views of the shoulder are described along with positioning of the patient and direction of the x-ray beam. Specific views are also provided to assess recurrent dislocations, calcified tendons, and fractures.
Basics of cxr modified ppt
This document provides an introduction to chest radiography. It discusses the history of chest x-rays, the basic densities seen on x-rays, different views including PA, AP, lateral views, and how to evaluate technical adequacy. It also reviews normal pulmonary, pleural, and cardiac anatomy as seen on chest x-rays, and provides an overview of interpreting chest x-ray findings. The document is intended as an educational guide for radiology presenters and moderators.
Skull anatomy and positioning
This document provides an overview of skull anatomy and various radiological projections used to image the skull. It describes the 22 bones that make up the skull, including landmarks like the nasion, glabella, and external occipital protuberance. Common projections are discussed like the PA, lateral, Towne, and Caldwell views. Specific positioning considerations and structures visualized are outlined for each view. Other projections for detailed examination of regions like the orbits, sinuses, facial bones and temporomandibular joints are also mentioned.
Sella Turcica (RAD31)
This document provides positioning instructions for several lateral, axial, and posteroanterior radiographic views of the sella turcica region. For a lateral projection, the central ray is directed to a point 3/4 inch anterior and superior to the external auditory meatus. For an AP axial view, the central ray angle is either 37 or 30 degrees caudad, directed at a reference point 1 1/2 inches above the superciliary arch. The Haas method is an alternative AP axial view where the dorsum sellae and posterior clinoid processes are demonstrated within the shadow of the foramen magnum.
basics of chest xray
This document provides guidance on techniques for performing and interpreting chest x-rays. It describes patient positioning and technical factors for standard views including PA, AP, lateral, lordotic, and oblique views. Expiratory and decubitus views are also covered. Key anatomic landmarks and common findings are discussed for each view. Pediatric chest x-rays require special consideration of patient cooperation and lower radiation doses. Overall, the document serves as a comprehensive guide to optimizing chest x-ray exams.
C spine positioning
This document discusses the positioning, technique, and interpretation of cervical spine x-rays, including the anterior-posterior, lateral, odontoid, and oblique views. It outlines the proper positioning of the patient and equipment for each view to ensure accurate imaging of the cervical vertebrae and soft tissues. Key findings are described, such as equal disc heights and alignment of spinous processes and occipital condyles. The purpose of the different views and measurements taken are provided to evaluate the cervical spine for fractures, subluxations, and degenerative changes.
ULTRASOUND EXAMINATION OF INFANT SPINE - STEP BY STEP
Ultrasonography is a useful first-line screening tool for evaluating the neonatal spine and detecting spinal dysraphism and other pathologies. It can accurately identify abnormalities of the spinal cord, meninges, vertebrae and surrounding tissues without the need for sedation or radiation. The optimal time to perform spinal ultrasound is before 6 months of age when the posterior vertebral elements are still cartilaginous. The technique involves surveying and then detailed scanning of the cord, cauda equina, filum terminale, conus position and bony structures to identify any variations from normal anatomy.
Presentation1.pptx, ultrasound examination of the 2nd & 3rd trimester pregnancy.
This document provides guidance on performing an ultrasound examination of the fetus in the second and third trimesters of pregnancy. It details the standard views and measurements that should be obtained, including images of the head, heart, abdomen, limbs and other structures. Potential abnormalities are also listed for each structure. Fetal echocardiography is important for detecting congenital cardiac defects, which occur in 2-6.5% of live births and can have serious consequences if not identified prenatally.
Projections of carpal tunnel and wrist
Basic and Supplementary Projection of Carpal Tunnel
and Wrist. IT GIVES INFORMATION'S ABOUT PROJECTIONS OF WRIST . IT IS MORE HELPFUL FOR IMAGING STUDENTS TO KNOW ABOUT WRIST AND ITS RADIO-GRAPHIC POSITIONS.
Anatomy of neuroaxial system final
This document provides an overview of spinal and epidural anesthesia techniques and relevant anatomy. It discusses the vertebral column, ligaments, meninges, spinal cord development and curves, and spinal nerves. Understanding this anatomy is important as spinal and epidural techniques are blind procedures with a risk of failure or complications if done incorrectly. Knowledge of the neurovascular structures like the spinal cord and its close relationship with the epidural space can help increase the success rate of these techniques and reduce devastating complications.
RIBS STERNUM X RAY PROJECTIONS .
Its the basic anatomy and x-ray views about ribs and sternum. Which gives a clear image about positions of x ray projections
Seminar new
The document provides guidance on cervical and thoracic spine radiography. It discusses patient positioning and technical factors for various projections including AP, lateral, and oblique views. Optimal visualization of spinal structures depends on centering the x-ray beam correctly and minimizing overlay of surrounding anatomy.
RADIOGRAPHIC VIEWS FOR HIP JOINT
RADIOGRAPHIC VIEWS FOR HIP JOINT BY MS.TAMIL SELVI.B
B.Sc(MIT) 2ND YEAR SHRI SATHYA SAI MEDICAL COLLEGE AND RESEARCH INSTUITE., THIRUPORUR
Radiology in ENT
This document provides information on various radiological techniques used in ENT. It describes X-rays of the paranasal sinuses including Waters and Caldwell's views. Common abnormalities seen on sinus X-rays like polyps, cysts and sinusitis are mentioned. Radiological evaluation of the neck includes lateral views to assess retropharyngeal abscesses. Sialography, bronchograms and barium swallow techniques are summarized. CT and MRI are briefly noted as important imaging modalities in ENT.
CRANIOSPINAL IRRADIATION-PART 1
The document discusses craniospinal irradiation (CSI) for treating tumors that can spread through the cerebrospinal fluid (CSF), such as medulloblastoma. It describes how CSI was developed to treat the entire nervous system by irradiating the brain, spinal cord, and CSF spaces. Key points covered include tumor types treated with CSI, techniques for delivering CSI safely and uniformly, matching fields at junctions, and dose schedules for average and high-risk patients.
fermented food science of sauerkraut.pptx
This ppt contains the production of a fermented food name - sauerkraut
Direct Seeded Rice - Climate Smart Agriculture
Direct Seeded Rice - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Direct Seeded Rice presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
More Related Content
Similar to presentation_soft_tissue_neck_(upper_airway)_radiography_1689575941_390760.pptx
Technique skull x ray
Skull x ray technique and positioning for diagnosis imaging , brief explanation, if there is error in power point it was my fault in presentation
Basic Chest X ray Views - AP, PA & Lateral etc . pptx
PA PROJECTION
Sit or stand upright.
Positioned to minimize magnification of the anteriorly positioned heart and consequent obscuration of the lungs.
Make sure the patient is standing straight and is equally distributing the weight of the body on both feet.
The upright position is preferred for the following reasons: It prevents engorgement (an excess of blood) of pulmonary vessels.
It allows full expansion of the lungs
To visualize possible air and fluid levels in the chest.
An upright chest film is preferred over an upright abdominal film for the diagnosis of pneumoperitoneum (free air in the abdominal cavity).
Ask the patient to move the shoulders forward and downward, so that the chest wall and both shoulders are in contact with the cassette. This helps to carry the clavicles below the lung apices.
It is very important to minimize breast shadows.
Ask the patient to pull the breasts upward and laterally (outwards), then remove her hands as she leans against the cassette holder to keep them in position.
Rotation
Even a small degree of rotation distorts the mediastinal borders, and the lung nearest the film will appear less translucent.
The following points should be stressed to obtain a true PA view (without rotation):
Ensure that the patient is standing evenly on both feet.
Both shoulders should be rolled forward and downward.
The chest radiograph should be well centred so that the medial ends of the clavicle are equidistant from the vertebral spinous processes at T4/5.
CENTRAL RAY
Over T7 vertebra
SID: 72 inches
Central ray
Film holder (image receptor) placement
The horizontal dimension of an average chest is greater than the vertical dimension.
This requires that a 14 x 17-inch film holder or image receptor (IR) be placed crosswise.
Or lengthwise depending on body type.
Collimation
The upper border of the illuminated field should be at the level of vertebra prominence (4 cm above the apex of lungs).
This will result in a lower collimation border of 1-2 inches below the costophrenic angle, if the central ray was correctly centred.
A general rule for average adult patients is to show a minimum of 10 ribs on a good PA chest radiograph.
Evaluation criteria for a good PA projection
Entire lung fields from apices to costophrenic angles should be clearly demonstrated.
No rotation. (both the right and left sternal ends of the clavicle will be the same distance from the center line of the spine.)
The direction of rotation can be determined by which sternal end of the clavicle is closest to the spine.
Trachea is visible in midline.
Scapula projected outside the lung fields.
Ten posterior ribs are visible above the diaphragm.
There is a sharp outline of the heart and diaphragm.
A faint shadow of the ribs and superior thoracic vertebrae is visible through the heart shadow.
Lung markings are visible from the hilum to the periphery of the lung.
Variations
An expiratory film may be helpful under some circumstances.
X-RAY PELVIS PROJECTIONS
This document provides an overview of various pelvis x-ray projections, including their purposes, patient positioning, technical factors, and image evaluation criteria. It describes the anteroposterior (AP), inlet, outlet, Judet, and flamingo projections. The AP view examines the pelvic ring and bones. The inlet is perpendicular to the pelvic rim. The outlet assesses cephalad/caudal translation following trauma. The Judet views the acetabulum. And the flamingo series evaluates pubic symphysis instability with the patient in neutral, left foot raised, and right foot raised positions. Proper collimation, centering, orientation and other technical parameters are outlined for each view.
Positioning and radiographic anatomy of the skull
This document provides information on positioning and radiographic anatomy of the skull. It discusses the anatomy of the skull and lists the 8 cranial bones. It then describes various positioning considerations for skull radiography including erect vs recumbent positioning, patient comfort, hygiene, exposure factors, SID and radiation protection. Several common skull radiographic projections are outlined including the AP, lateral, PA, submentovertex and oblique projections. For each projection, the demonstrated pathology, positioning, central ray angle and structures shown are described.
skull presentation by neha singh.pptx
This document provides information on cranium views in radiography, including surface landmarks, baseline positions, tube angulation, patient preparation, basic views like frontal, lateral, and occipital, and special views like Caldwells, Towns, and sub-mento vertical. It describes the positioning, centering, and technical factors for each view. The purpose is to demonstrate the proper technique for obtaining diagnostic cranium radiographs.
SHOULDER JOINT
The document discusses various radiographic views of the shoulder joint including the glenohumeral joint, acromioclavicular joint, clavicle, and scapula. Standard anteroposterior, superoinferior, outlet, and stress views of the shoulder are described along with positioning of the patient and direction of the x-ray beam. Specific views are also provided to assess recurrent dislocations, calcified tendons, and fractures.
Basics of cxr modified ppt
This document provides an introduction to chest radiography. It discusses the history of chest x-rays, the basic densities seen on x-rays, different views including PA, AP, lateral views, and how to evaluate technical adequacy. It also reviews normal pulmonary, pleural, and cardiac anatomy as seen on chest x-rays, and provides an overview of interpreting chest x-ray findings. The document is intended as an educational guide for radiology presenters and moderators.
Skull anatomy and positioning
This document provides an overview of skull anatomy and various radiological projections used to image the skull. It describes the 22 bones that make up the skull, including landmarks like the nasion, glabella, and external occipital protuberance. Common projections are discussed like the PA, lateral, Towne, and Caldwell views. Specific positioning considerations and structures visualized are outlined for each view. Other projections for detailed examination of regions like the orbits, sinuses, facial bones and temporomandibular joints are also mentioned.
Sella Turcica (RAD31)
This document provides positioning instructions for several lateral, axial, and posteroanterior radiographic views of the sella turcica region. For a lateral projection, the central ray is directed to a point 3/4 inch anterior and superior to the external auditory meatus. For an AP axial view, the central ray angle is either 37 or 30 degrees caudad, directed at a reference point 1 1/2 inches above the superciliary arch. The Haas method is an alternative AP axial view where the dorsum sellae and posterior clinoid processes are demonstrated within the shadow of the foramen magnum.
basics of chest xray
This document provides guidance on techniques for performing and interpreting chest x-rays. It describes patient positioning and technical factors for standard views including PA, AP, lateral, lordotic, and oblique views. Expiratory and decubitus views are also covered. Key anatomic landmarks and common findings are discussed for each view. Pediatric chest x-rays require special consideration of patient cooperation and lower radiation doses. Overall, the document serves as a comprehensive guide to optimizing chest x-ray exams.
C spine positioning
This document discusses the positioning, technique, and interpretation of cervical spine x-rays, including the anterior-posterior, lateral, odontoid, and oblique views. It outlines the proper positioning of the patient and equipment for each view to ensure accurate imaging of the cervical vertebrae and soft tissues. Key findings are described, such as equal disc heights and alignment of spinous processes and occipital condyles. The purpose of the different views and measurements taken are provided to evaluate the cervical spine for fractures, subluxations, and degenerative changes.
ULTRASOUND EXAMINATION OF INFANT SPINE - STEP BY STEP
Ultrasonography is a useful first-line screening tool for evaluating the neonatal spine and detecting spinal dysraphism and other pathologies. It can accurately identify abnormalities of the spinal cord, meninges, vertebrae and surrounding tissues without the need for sedation or radiation. The optimal time to perform spinal ultrasound is before 6 months of age when the posterior vertebral elements are still cartilaginous. The technique involves surveying and then detailed scanning of the cord, cauda equina, filum terminale, conus position and bony structures to identify any variations from normal anatomy.
Presentation1.pptx, ultrasound examination of the 2nd & 3rd trimester pregnancy.
This document provides guidance on performing an ultrasound examination of the fetus in the second and third trimesters of pregnancy. It details the standard views and measurements that should be obtained, including images of the head, heart, abdomen, limbs and other structures. Potential abnormalities are also listed for each structure. Fetal echocardiography is important for detecting congenital cardiac defects, which occur in 2-6.5% of live births and can have serious consequences if not identified prenatally.
Projections of carpal tunnel and wrist
Basic and Supplementary Projection of Carpal Tunnel
and Wrist. IT GIVES INFORMATION'S ABOUT PROJECTIONS OF WRIST . IT IS MORE HELPFUL FOR IMAGING STUDENTS TO KNOW ABOUT WRIST AND ITS RADIO-GRAPHIC POSITIONS.
Anatomy of neuroaxial system final
This document provides an overview of spinal and epidural anesthesia techniques and relevant anatomy. It discusses the vertebral column, ligaments, meninges, spinal cord development and curves, and spinal nerves. Understanding this anatomy is important as spinal and epidural techniques are blind procedures with a risk of failure or complications if done incorrectly. Knowledge of the neurovascular structures like the spinal cord and its close relationship with the epidural space can help increase the success rate of these techniques and reduce devastating complications.
RIBS STERNUM X RAY PROJECTIONS .
Its the basic anatomy and x-ray views about ribs and sternum. Which gives a clear image about positions of x ray projections
Seminar new
The document provides guidance on cervical and thoracic spine radiography. It discusses patient positioning and technical factors for various projections including AP, lateral, and oblique views. Optimal visualization of spinal structures depends on centering the x-ray beam correctly and minimizing overlay of surrounding anatomy.
RADIOGRAPHIC VIEWS FOR HIP JOINT
RADIOGRAPHIC VIEWS FOR HIP JOINT BY MS.TAMIL SELVI.B
B.Sc(MIT) 2ND YEAR SHRI SATHYA SAI MEDICAL COLLEGE AND RESEARCH INSTUITE., THIRUPORUR
Radiology in ENT
This document provides information on various radiological techniques used in ENT. It describes X-rays of the paranasal sinuses including Waters and Caldwell's views. Common abnormalities seen on sinus X-rays like polyps, cysts and sinusitis are mentioned. Radiological evaluation of the neck includes lateral views to assess retropharyngeal abscesses. Sialography, bronchograms and barium swallow techniques are summarized. CT and MRI are briefly noted as important imaging modalities in ENT.
CRANIOSPINAL IRRADIATION-PART 1
The document discusses craniospinal irradiation (CSI) for treating tumors that can spread through the cerebrospinal fluid (CSF), such as medulloblastoma. It describes how CSI was developed to treat the entire nervous system by irradiating the brain, spinal cord, and CSF spaces. Key points covered include tumor types treated with CSI, techniques for delivering CSI safely and uniformly, matching fields at junctions, and dose schedules for average and high-risk patients.
Similar to presentation_soft_tissue_neck_(upper_airway)_radiography_1689575941_390760.pptx (20)
Basic Chest X ray Views - AP, PA & Lateral etc . pptx
Basic Chest X ray Views - AP, PA & Lateral etc . pptx
ULTRASOUND EXAMINATION OF INFANT SPINE - STEP BY STEP
ULTRASOUND EXAMINATION OF INFANT SPINE - STEP BY STEP
Presentation1.pptx, ultrasound examination of the 2nd & 3rd trimester pregnancy.
Presentation1.pptx, ultrasound examination of the 2nd & 3rd trimester pregnancy.
Recently uploaded
fermented food science of sauerkraut.pptx
This ppt contains the production of a fermented food name - sauerkraut
Direct Seeded Rice - Climate Smart Agriculture
Direct Seeded Rice - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Direct Seeded Rice presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
Mechanisms and Applications of Antiviral Neutralizing Antibodies - Creative B...
Neutralizing antibodies, pivotal in immune defense, specifically bind and inhibit viral pathogens, thereby playing a crucial role in protecting against and mitigating infectious diseases. In this slide, we will introduce what antibodies and neutralizing antibodies are, the production and regulation of neutralizing antibodies, their mechanisms of action, classification and applications, as well as the challenges they face.
快速办理(UAM毕业证书)马德里自治大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(UAM毕业证书)马德里自治大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Candidate young stellar objects in the S-cluster: Kinematic analysis of a sub...
Context. The observation of several L-band emission sources in the S cluster has led to a rich discussion of their nature. However, a definitive answer to the classification of the dusty objects requires an explanation for the detection of compact Doppler-shifted Brγ emission. The ionized hydrogen in combination with the observation of mid-infrared L-band continuum emission suggests that most of these sources are embedded in a dusty envelope. These embedded sources are part of the S-cluster, and their relationship to the S-stars is still under debate. To date, the question of the origin of these two populations has been vague, although all explanations favor migration processes for the individual cluster members. Aims. This work revisits the S-cluster and its dusty members orbiting the supermassive black hole SgrA* on bound Keplerian orbits from a kinematic perspective. The aim is to explore the Keplerian parameters for patterns that might imply a nonrandom distribution of the sample. Additionally, various analytical aspects are considered to address the nature of the dusty sources. Methods. Based on the photometric analysis, we estimated the individual H−K and K−L colors for the source sample and compared the results to known cluster members. The classification revealed a noticeable contrast between the S-stars and the dusty sources. To fit the flux-density distribution, we utilized the radiative transfer code HYPERION and implemented a young stellar object Class I model. We obtained the position angle from the Keplerian fit results; additionally, we analyzed the distribution of the inclinations and the longitudes of the ascending node. Results. The colors of the dusty sources suggest a stellar nature consistent with the spectral energy distribution in the near and midinfrared domains. Furthermore, the evaporation timescales of dusty and gaseous clumps in the vicinity of SgrA* are much shorter ( 2yr) than the epochs covered by the observations (≈15yr). In addition to the strong evidence for the stellar classification of the D-sources, we also find a clear disk-like pattern following the arrangements of S-stars proposed in the literature. Furthermore, we find a global intrinsic inclination for all dusty sources of 60 ± 20◦, implying a common formation process. Conclusions. The pattern of the dusty sources manifested in the distribution of the position angles, inclinations, and longitudes of the ascending node strongly suggests two different scenarios: the main-sequence stars and the dusty stellar S-cluster sources share a common formation history or migrated with a similar formation channel in the vicinity of SgrA*. Alternatively, the gravitational influence of SgrA* in combination with a massive perturber, such as a putative intermediate mass black hole in the IRS 13 cluster, forces the dusty objects and S-stars to follow a particular orbital arrangement. Key words. stars: black holes– stars: formation– Galaxy: center– galaxies: star formation
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
Sustainable Land Management - Climate Smart Agriculture
Sustainable Land Management - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Sustainable Land Management presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024.
11.1 Role of physical biological in deterioration of grains.pdf
Storagedeteriorationisanyformoflossinquantityandqualityofbio-materials.
Themajorcausesofdeteriorationinstorage
•Physical
•Biological
•Mechanical
•Chemical
Storageonlypreservesquality.Itneverimprovesquality.
Itisadvisabletostartstoragewithqualityfoodproduct.Productwithinitialpoorqualityquicklydepreciates
The cost of acquiring information by natural selection
This is a short talk that I gave at the Banff International Research Station workshop on Modeling and Theory in Population Biology. The idea is to try to understand how the burden of natural selection relates to the amount of information that selection puts into the genome.
It's based on the first part of this research paper:
The cost of information acquisition by natural selection
Ryan Seamus McGee, Olivia Kosterlitz, Artem Kaznatcheev, Benjamin Kerr, Carl T. Bergstrom
bioRxiv 2022.07.02.498577; doi: https://doi.org/10.1101/2022.07.02.498577
Farming systems analysis: what have we learnt?.pptx
Presentation given at the official farewell of Prof Ken Gillet at Wageningen on 13 June 2024
Gadgets for management of stored product pests_Dr.UPR.pdf
Insectsplayamajorroleinthedeteriorationoffoodgrainscausingbothquantitativeandqualitativelosses
Wellprovedthatnogranariescanbefilledwithgrainswithoutinsectsastheharvestedproducecontainegg(or)larvae(or)pupae(or)adultinsectinthembecauseoffieldcarryoverinfestationwhichcannotbeavoidedindevelopingcountrieslikeIndia
Simpletechnologiesfortimelydetectionofinsectsinthestoredproduceandtherebyplantimelycontrolmeasures
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Male reproduction physiology by Suyash Garg .pptx
Physiology of Male reproduction.
Video mentioned at page no. 23 as summary for better understanding
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...Advanced-Concepts-Team
Presentation in the Science Coffee of the Advanced Concepts Team of the European Space Agency on the 07.06.2024.
Speaker: Diego Blas (IFAE/ICREA)
Title: Gravitational wave detection with orbital motion of Moon and artificial
Abstract:
In this talk I will describe some recent ideas to find gravitational waves from supermassive black holes or of primordial origin by studying their secular effect on the orbital motion of the Moon or satellites that are laser ranged.JAMES WEBB STUDY THE MASSIVE BLACK HOLE SEEDS
The pathway(s) to seeding the massive black holes (MBHs) that exist at the heart of galaxies in the present and distant Universe remains an unsolved problem. Here we categorise, describe and quantitatively discuss the formation pathways of both light and heavy seeds. We emphasise that the most recent computational models suggest that rather than a bimodal-like mass spectrum between light and heavy seeds with light at one end and heavy at the other that instead a continuum exists. Light seeds being more ubiquitous and the heavier seeds becoming less and less abundant due the rarer environmental conditions required for their formation. We therefore examine the different mechanisms that give rise to different seed mass spectrums. We show how and why the mechanisms that produce the heaviest seeds are also among the rarest events in the Universe and are hence extremely unlikely to be the seeds for the vast majority of the MBH population. We quantify, within the limits of the current large uncertainties in the seeding processes, the expected number densities of the seed mass spectrum. We argue that light seeds must be at least 103 to 105 times more numerous than heavy seeds to explain the MBH population as a whole. Based on our current understanding of the seed population this makes heavy seeds (Mseed > 103 M⊙) a significantly more likely pathway given that heavy seeds have an abundance pattern than is close to and likely in excess of 10−4 compared to light seeds. Finally, we examine the current state-of-the-art in numerical calculations and recent observations and plot a path forward for near-future advances in both domains.
Recently uploaded (20)
Mechanisms and Applications of Antiviral Neutralizing Antibodies - Creative B...
Mechanisms and Applications of Antiviral Neutralizing Antibodies - Creative B...
Candidate young stellar objects in the S-cluster: Kinematic analysis of a sub...
Candidate young stellar objects in the S-cluster: Kinematic analysis of a sub...
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Sustainable Land Management - Climate Smart Agriculture
Sustainable Land Management - Climate Smart Agriculture
11.1 Role of physical biological in deterioration of grains.pdf
11.1 Role of physical biological in deterioration of grains.pdf
The cost of acquiring information by natural selection
The cost of acquiring information by natural selection
Farming systems analysis: what have we learnt?.pptx
Farming systems analysis: what have we learnt?.pptx
Clinical periodontology and implant dentistry 2003.pdf
Clinical periodontology and implant dentistry 2003.pdf
Gadgets for management of stored product pests_Dr.UPR.pdf
Gadgets for management of stored product pests_Dr.UPR.pdf
Juaristi, Jon. - El canon espanol. El legado de la cultura española a la civi...
Juaristi, Jon. - El canon espanol. El legado de la cultura española a la civi...
Microbiology of Central Nervous System INFECTIONS.pdf
Microbiology of Central Nervous System INFECTIONS.pdf
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...
ESA/ACT Science Coffee: Diego Blas - Gravitational wave detection with orbita...
presentation_soft_tissue_neck_(upper_airway)_radiography_1689575941_390760.pptx
- 1. Presented by – Mr. AYUSH KUMAR GUPTA ASSISTANT PROFESSOR DEPARTMENT OF RADIO-IMAGING TECHNOLOGY
- 2. SOFT TISSUE NECK Soft tissue neck radiographs are commonly demonstrate to look of foreign bodies (e.g. fish bone) or, particularly in kids, to assess upper airways infections. There are two types of x-ray view for diagnosing the upper airway – AP LATERAL Both are done in erect position (commonly).
- 4. SOFT TISSUE NECK (AP) Patient positioning – Ask the patient to stand in erect AP position facing an upright cassette holder. Midline of the body should be in the midline of the cassette. Cervical spine should be center of the cassette. Both shoulder should be in the same horizontal plane and pronated with equal amount of weight for equal level of shoulders. Extend the neck as possible as enough. Upper end of cassette should be 1 inch above the upper part of ear pinna.
- 5. SOFT TISSUE NECK (AP) Central ray The central ray is directed horizontally with the tube angle 15 to 20 degree cephalic angle at the level of C4 vertebra. During the exposure mouth will be remain closed.
- 6. SOFT TISSUE NECK (AP) Exposure chart Cassette size – 8”*10” or 10”*12” SID – 100cm Grid – no mA – 200 mAs = 12 – 16 kVp = 40 – 45 Exposure timer – 12/200 = 0.06 sec L
- 8. SOFT TISSUE NECK (LATERAL) Patient positioning – Ask the patient to stand in erect LATERAL position facing an upright cassette holder. Cervical spine should be center of the cassette. Both shoulder should be in the same horizontal plane and pronated with equal amount of weight for equal level of shoulders. Extend the neck as possible as enough. Upper end of cassette should be 1 inch above the upper part of ear pinna.
- 9. SOFT TISSUE NECK (LATERAL) Central ray The central ray is directed horizontally at the level of C4 vertebra. During the exposure mouth will be remain closed
- 10. SOFT TISSUE NECK (LATERAL) Exposure chart Cassette size – 8”*10” or 10”*12” SID – 100cm Grid – no mA – 200 mAs = 12 – 16 kVp = 40 – 45 Exposure timer – 12/200 = 0.06 sec
- 11. SOFT TISSUE NECK OUTLINE REPRESENTATION