A computer network connects computers together to share resources like internet access. A router receives and directs packets between networks and may convert between network types. The document then discusses configuring a MikroTik 951g-2hnd router by connecting it to a laptop, using Winbox software to add a WAN IP and default route, enable wireless and add a password, create a DHCP server, and configure NAT, NTP, and ports. Finally, the computer's IP is changed to automatic and ping tests are done to the Google DNS to confirm the basic router configuration.

1. Basic Network and MikroTik Configuration
Presented by:
Md Sohrab Hossain
System Engineer
IPTEC Limited.

3. A computer network is a set
of computers connected together for the
purpose of sharing resources. The most
common resource shared today is
connection to the Internet. Other shared
resources can include a printer or a file
server.

5. A router is hardware device designed to
receive, analyze and move incoming packets
to another network. It may also be used to
convert the packets to another network
interface, drop them, and perform other
actions relating to a network A router is
connected to at least two networks,
commonly two LANs or WANs or a LAN and
its ISP's network. Routers are located at
gateways, the places where two or more
networks connect.

7. Today we are going to configure MikroTik 951g-2hnd

8. Advantage of MikroTik Router
 Bandwidth Management
 Web site filter
 Firewall
 VPN
 Failover
 Load Balance
 BGP
 EoiP, IP, GRE tunnel
 Hotspot
 Radius
 OSPF
 RIP
etc

9. 1. First Connect the MikroTik to your Laptop
2. Open winbox software from your computer

10. Click to connect

11. Connect to the Router

12. Add WAN IP address

13. Add default route

14. Add DNS

15. Try to ping google DNS

16. Add a bridge

17. Add ports to the Bridge

18. Enable and configure wireless

19. Add password for WiFi

20. Add LAN ip address to bridge1

21. Create a DHCP server

22. Configure NAT

23. Enable graphs

24. Configure NTP Client

25. Change http:// port

26. Change your Computer IP address as a automatic

27. Check your IP address

28. Try to ping google DNS (8.8.8.8)

29. Thank you for watching 