This document provides specifications for the JS-K1 series power relay. The relay has 1 pole and 8A medium load control. It features a plastic sealed enclosure, various contact material options, and RoHS compliance. The document includes details on part numbering, specifications, coil ratings, safety standards, characteristic data, dimensions, and RoHS/lead free information. It provides concise technical specifications for the relay in a comprehensive product document.
This document describes the features and specifications of the Model 2700 digital clamp meter. It has a large LCD display for easy reading, a data hold switch, low battery indication, continuity buzzer, tough ABS plastic housing, diode check function, and includes test leads, carrying case, and manual. It measures AC and DC current and voltage, resistance, tests diodes, and has continuity testing with overload protection on all ranges.
This document provides specifications for MCC 1N4728 through 1N4764 zener diodes. It includes maximum ratings, electrical characteristics, and dimensions for the glass packaged diodes. Key specifications include:
- Voltage ratings from 3.3V to 100V
- Power dissipation of 1W at 100C case temperature
- Test currents and voltages, dynamic impedance, reverse leakage, and more
- Temperature coefficients and maximum surge currents
- Hermetic glass packages in DO-41 case from 0.166 to 0.205 inches in length
This document provides information about a high frequency crossover device called the XOB1208F200S-T. It is a surface mount component made of high purity alumina and copper microstrip transmission lines. It has a bandwidth exceeding 20 GHz and is suitable for applications beyond 5 GHz like optical modules. It has tight impedance control of 50 ohms and provides signal integrity for routing transitions on single layer boards. Custom prototypes and full production capacity are available.
This document provides information on explosive atmosphere products certified for use in dust zones, including:
- Proximity sensors for zones 21-22 certified for dust explosions.
- Limit switches, pressure switches, and operator interface products like pushbuttons certified for zones 21-22.
- Weighing, automation, and interface modules from Schneider Electric for integration into zone-rated control panels.
This document provides specifications for the Toshiba 2SK2233 field effect transistor. It is an N-channel MOS transistor suitable for chopper regulator, DC-DC converter, and motor drive applications. Key specifications include a low drain-source on resistance of 0.022 ohms, high forward transfer admittance of 27 Siemens, and maximum drain current of 45 amps. The document provides detailed maximum ratings, electrical characteristics, thermal characteristics, and packaging information.
This document provides a macromodel for the MC33078 dual operational amplifier. The macromodel code is provided which models the input stage, amplifying stage, and output stage of the operational amplifier. Electrical characteristics obtained from simulations using the macromodel are also listed, including voltage gain, supply current, input common mode voltage range, and other key parameters.
This document provides the technical specifications for a digital multimeter and LCR meter Model 306, including its measurement ranges, resolutions, accuracies, and features. It measures DC and AC voltage and current, capacitance, inductance, resistance, duty cycle, frequency, diode test, and transistor hFE. Key features include a 31⁄2 digit LCD display, auto-ranging frequency measurement up to 15MHz, MAX HOLD, and protection from overloads. It is powered by a single 9V battery and has dimensions of 200mm x 90mm x 40mm.
This document summarizes various types of polyester, polypropylene, and precision capacitors. It provides information on their series, pitch, dielectric material, electrodes, capacitance range, rated voltage, tolerances, temperature range and other specifications. The capacitors are suitable for applications including filtering, high frequency, interference suppression and more.
This document describes the features and specifications of the Model 2700 digital clamp meter. It has a large LCD display for easy reading, a data hold switch, low battery indication, continuity buzzer, tough ABS plastic housing, diode check function, and includes test leads, carrying case, and manual. It measures AC and DC current and voltage, resistance, tests diodes, and has continuity testing with overload protection on all ranges.
This document provides specifications for MCC 1N4728 through 1N4764 zener diodes. It includes maximum ratings, electrical characteristics, and dimensions for the glass packaged diodes. Key specifications include:
- Voltage ratings from 3.3V to 100V
- Power dissipation of 1W at 100C case temperature
- Test currents and voltages, dynamic impedance, reverse leakage, and more
- Temperature coefficients and maximum surge currents
- Hermetic glass packages in DO-41 case from 0.166 to 0.205 inches in length
This document provides information about a high frequency crossover device called the XOB1208F200S-T. It is a surface mount component made of high purity alumina and copper microstrip transmission lines. It has a bandwidth exceeding 20 GHz and is suitable for applications beyond 5 GHz like optical modules. It has tight impedance control of 50 ohms and provides signal integrity for routing transitions on single layer boards. Custom prototypes and full production capacity are available.
This document provides information on explosive atmosphere products certified for use in dust zones, including:
- Proximity sensors for zones 21-22 certified for dust explosions.
- Limit switches, pressure switches, and operator interface products like pushbuttons certified for zones 21-22.
- Weighing, automation, and interface modules from Schneider Electric for integration into zone-rated control panels.
This document provides specifications for the Toshiba 2SK2233 field effect transistor. It is an N-channel MOS transistor suitable for chopper regulator, DC-DC converter, and motor drive applications. Key specifications include a low drain-source on resistance of 0.022 ohms, high forward transfer admittance of 27 Siemens, and maximum drain current of 45 amps. The document provides detailed maximum ratings, electrical characteristics, thermal characteristics, and packaging information.
This document provides a macromodel for the MC33078 dual operational amplifier. The macromodel code is provided which models the input stage, amplifying stage, and output stage of the operational amplifier. Electrical characteristics obtained from simulations using the macromodel are also listed, including voltage gain, supply current, input common mode voltage range, and other key parameters.
This document provides the technical specifications for a digital multimeter and LCR meter Model 306, including its measurement ranges, resolutions, accuracies, and features. It measures DC and AC voltage and current, capacitance, inductance, resistance, duty cycle, frequency, diode test, and transistor hFE. Key features include a 31⁄2 digit LCD display, auto-ranging frequency measurement up to 15MHz, MAX HOLD, and protection from overloads. It is powered by a single 9V battery and has dimensions of 200mm x 90mm x 40mm.
This document summarizes various types of polyester, polypropylene, and precision capacitors. It provides information on their series, pitch, dielectric material, electrodes, capacitance range, rated voltage, tolerances, temperature range and other specifications. The capacitors are suitable for applications including filtering, high frequency, interference suppression and more.
FlexBar HRT is a configurable pressure transmitter that measures absolute or gauge pressure using a polysilicon strain gauge sensor. It provides a 4-20 mA output with HART communication and has explosion-proof certifications. It is used in food, chemical, and petrochemical industries for machine and hydraulic applications. It has configurable settings, various process connections, and intrinsic safety approvals.
SPICE MODEL of 2SK2989 (Professional+BDP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK2989 (Professional+BDP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
The document provides specifications for the Mitsubishi CM450DX-24S IGBT module. Key details include:
1) It is a 6th generation insulated IGBT module rated for 450A collector current and 1200V collector-emitter voltage.
2) It has a maximum junction temperature of 175°C and is compliant with RoHS directives.
3) The document provides extensive electrical, thermal, and mechanical specifications and characteristics for the module.
4) Graphs of typical output and saturation voltage characteristics are shown.
Natus provides neurodiagnostic accessories including disposable and reusable needles and electrodes for needle electromyography, nerve conduction studies, evoked potentials, and electroencephalography. Their catalog showcases their complete line of products for these applications, including needles, surface electrodes, cables, and grounding electrodes. Customers can find the accessories they need for neurodiagnostic procedures and contact Natus for technical support or to provide feedback.
This document provides specifications for refrigerator lighting products from EarthLED. It describes three product types - RL1L and RL1R for left and right ends, and RL1C for center sections. Key features include slim designs, RoHS compliance, and mercury-free long-life LEDs. Optical and electrical specifications are provided along with installation guidelines and product coding definitions. A five-year warranty and significant energy savings compared to fluorescent tubes are highlighted.
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document advertises exclusive products available through a free online store, where users can get paid for product purchases without buyers knowing their identity. It mentions a sneak preview of a product launched in September and provides a contact to learn more about how to participate and earn money through the online store.
PH DARAH ANDA ADALAH BERASID DAN BERTOKSIK!!
JIKA ANDA MENGALAMI GEJALA SEPERTI BERIKUT:
- SELALU DAN MUDAH LETIH
- KEKELIRUAN
- SESAK NAFAS
- MENGANTUK
- SELALU SAKIT KEPALA
- KURANG SELERA MAKAN
- BAU BADAN
- SEJUK KAKI TANGAN
- SELALU SAKIT
- BANYAK ANGIN DALAM BADAN
The document lists 37 habits of successful people which include knowing their purpose and passion, taking action, learning constantly, ignoring negative people, inspiring others, and learning from failures. It also lists 29 habits of unsuccessful people such as being unsure of their goals, fearing failure, underestimating their value, not investing in education, and blaming others for problems. Overall, the document contrasts the mindsets and behaviors of highly successful versus unsuccessful individuals.
This document summarizes a presentation on developing robotic systems for upper limb neurorehabilitation. It discusses developing human-robot symbiosis through wearable robots that allow natural control and safe interaction. The presentation covers robotic hands that can perform actions like reaching, grasping, and manipulating objects, and how these can be used for motor therapy, prosthetics, and personal assistance. Developing systems that provide body ownership during physical human-robot interaction is also discussed.
The document provides advice and wisdom for achieving success through action rather than just ideas. It recommends being proactive by making eye contact, walking faster, and smiling; taking initiative by volunteering and crusading for causes; and focusing on consistent effort over time rather than waiting for perfect conditions or moments of inspiration by putting in hard work through perspiration. Success is portrayed as a journey requiring sustained effort through action rather than a single destination.
Film trailer research - 'PS I Love You' 9 screen grabsevaaverill
P.S. I Love You is a romantic comedy drama about a woman whose husband leaves letters to help her move on after his death. The film uses conventions of the genre like romantic gestures in the letters, idyllic settings that shift from New York to Ireland, and intimate scenes and closeups between the protagonists to portray their intense relationship and show love through remembrance and the ability to move on as conveyed by the letters.
The document discusses the basics of JSON including:
1) JSON consists of name/value pairs, objects, and arrays. It is surrounded by curly braces and is a standard data format for exchanging data.
2) JSON properties can be strings, numbers, booleans, null, objects, or arrays. Numbers can be integers or floats with optional exponents.
3) An object is an unordered collection of name/value pairs and an array is an ordered collection of values.
The document discusses good leadership and dispels common myths. It asserts that leaders must first become good servants and leadership is about serving others rather than personal achievements. While leadership abilities may be innate, leaders are also made through self-knowledge, choosing a direction, and disciplining oneself to serve others well. True leadership requires caring for and developing others.
FlexBar HRT is a configurable pressure transmitter that measures absolute or gauge pressure using a polysilicon strain gauge sensor. It provides a 4-20 mA output with HART communication and has explosion-proof certifications. It is used in food, chemical, and petrochemical industries for machine and hydraulic applications. It has configurable settings, various process connections, and intrinsic safety approvals.
SPICE MODEL of 2SK2989 (Professional+BDP Model) in SPICE PARKTsuyoshi Horigome
SPICE MODEL of 2SK2989 (Professional+BDP Model) in SPICE PARK. English Version is http://www.spicepark.net. Japanese Version is http://www.spicepark.com by Bee Technologies.
The document provides specifications for the Mitsubishi CM450DX-24S IGBT module. Key details include:
1) It is a 6th generation insulated IGBT module rated for 450A collector current and 1200V collector-emitter voltage.
2) It has a maximum junction temperature of 175°C and is compliant with RoHS directives.
3) The document provides extensive electrical, thermal, and mechanical specifications and characteristics for the module.
4) Graphs of typical output and saturation voltage characteristics are shown.
Natus provides neurodiagnostic accessories including disposable and reusable needles and electrodes for needle electromyography, nerve conduction studies, evoked potentials, and electroencephalography. Their catalog showcases their complete line of products for these applications, including needles, surface electrodes, cables, and grounding electrodes. Customers can find the accessories they need for neurodiagnostic procedures and contact Natus for technical support or to provide feedback.
This document provides specifications for refrigerator lighting products from EarthLED. It describes three product types - RL1L and RL1R for left and right ends, and RL1C for center sections. Key features include slim designs, RoHS compliance, and mercury-free long-life LEDs. Optical and electrical specifications are provided along with installation guidelines and product coding definitions. A five-year warranty and significant energy savings compared to fluorescent tubes are highlighted.
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
This document advertises exclusive products available through a free online store, where users can get paid for product purchases without buyers knowing their identity. It mentions a sneak preview of a product launched in September and provides a contact to learn more about how to participate and earn money through the online store.
PH DARAH ANDA ADALAH BERASID DAN BERTOKSIK!!
JIKA ANDA MENGALAMI GEJALA SEPERTI BERIKUT:
- SELALU DAN MUDAH LETIH
- KEKELIRUAN
- SESAK NAFAS
- MENGANTUK
- SELALU SAKIT KEPALA
- KURANG SELERA MAKAN
- BAU BADAN
- SEJUK KAKI TANGAN
- SELALU SAKIT
- BANYAK ANGIN DALAM BADAN
The document lists 37 habits of successful people which include knowing their purpose and passion, taking action, learning constantly, ignoring negative people, inspiring others, and learning from failures. It also lists 29 habits of unsuccessful people such as being unsure of their goals, fearing failure, underestimating their value, not investing in education, and blaming others for problems. Overall, the document contrasts the mindsets and behaviors of highly successful versus unsuccessful individuals.
This document summarizes a presentation on developing robotic systems for upper limb neurorehabilitation. It discusses developing human-robot symbiosis through wearable robots that allow natural control and safe interaction. The presentation covers robotic hands that can perform actions like reaching, grasping, and manipulating objects, and how these can be used for motor therapy, prosthetics, and personal assistance. Developing systems that provide body ownership during physical human-robot interaction is also discussed.
The document provides advice and wisdom for achieving success through action rather than just ideas. It recommends being proactive by making eye contact, walking faster, and smiling; taking initiative by volunteering and crusading for causes; and focusing on consistent effort over time rather than waiting for perfect conditions or moments of inspiration by putting in hard work through perspiration. Success is portrayed as a journey requiring sustained effort through action rather than a single destination.
Film trailer research - 'PS I Love You' 9 screen grabsevaaverill
P.S. I Love You is a romantic comedy drama about a woman whose husband leaves letters to help her move on after his death. The film uses conventions of the genre like romantic gestures in the letters, idyllic settings that shift from New York to Ireland, and intimate scenes and closeups between the protagonists to portray their intense relationship and show love through remembrance and the ability to move on as conveyed by the letters.
The document discusses the basics of JSON including:
1) JSON consists of name/value pairs, objects, and arrays. It is surrounded by curly braces and is a standard data format for exchanging data.
2) JSON properties can be strings, numbers, booleans, null, objects, or arrays. Numbers can be integers or floats with optional exponents.
3) An object is an unordered collection of name/value pairs and an array is an ordered collection of values.
The document discusses good leadership and dispels common myths. It asserts that leaders must first become good servants and leadership is about serving others rather than personal achievements. While leadership abilities may be innate, leaders are also made through self-knowledge, choosing a direction, and disciplining oneself to serve others well. True leadership requires caring for and developing others.
The document analyzes the film trailer for the thriller movie "Taken". It discusses several elements that are common to film trailers like the studio logo, which establishes the film's production company and budget. It also examines how the trailer introduces the protagonists and begins telling the story through title cards and shots that build mystery and intrigue around a missing daughter.
SEO is the act of optimizing a website to increase its visibility in organic search engine results. The document provides 12 reasons why SEO is important: 1) SEO is an investment, not a cost, that can provide high returns; 2) SEO increases visibility of a website as the "sales rockstar"; 3) SEO is a crucial part of an effective marketing mix; 4) SEO impacts the customer research and buying cycle; 5) SEO pricing varies based on customization needed; 6) Expensive SEO can help achieve goals faster at a higher ROI; 7) SEO should be integrated into a website from the start, not added as an afterthought; 8) An SEO-
This document provides instructions for creating a paper boat using origami. It begins with an introduction to origami, explaining that it is the Japanese art of paper folding. It then lists reasons to learn origami, such as for survival kits, affordable toys/games, and making pocket money. The instructions section notes that you need one rectangular piece of paper to make the boat. It concludes by recapping that you can now create a paper boat in under 5 minutes using any foldable paper.
The document summarizes the specifications of four different transistor components:
1) A 2N5638RLRAG N-channel JFET with a 30V drain-source voltage and 50mA current at 20V. It uses a TO-92 package.
2) A 350V 5kA gas discharge tube available in different models with 5mm diameter and 7.5mm length.
3) A BLF278 MOSFET with 22dB gain, 300W output power, and SOT-262A1 package for 108MHz frequency applications.
4) A 40V 500mA 16-pin NPN transistor array in an SOIC package with a minimum hFE of 100 at specified
The document contains specifications for several transistor components, including:
1) A 2N5638RLRAG N-channel JFET with a 30V drain-source voltage and 50mA drain current.
2) A ZM 576 3R 350B gas discharge tube with a 350V sparkover voltage and 5kA impulse current rating.
3) A BLF278 MOSFET with 22dB gain and 300W power output at 108MHz.
4) A quad NPN transistor array in a 16-SOIC package with 40V and 500mA ratings per transistor.
5) A PNP/N-channel transistor array in an SOT-363 package with 40
The UTC 2N60 is a high voltage n-channel MOSFET designed for fast switching applications. It has an on-state resistance of 3.8 ohms, low gate charge of 9.0 nC, and can handle continuous drain currents of 2.0 amps or pulsed currents of 8.0 amps. The MOSFET is available in TO-220, TO-220F, TO-251, and TO-252 packages.
This document provides specifications for the TPC8118 P-channel MOSFET transistor from Toshiba. It is intended for use in notebook PC applications due to its small size and low drain-source on-resistance. Key specifications include a maximum drain-source voltage of -30V, threshold voltage between -0.8V to -2.0V, and on-resistance as low as 5.5mOhms. The document provides detailed absolute maximum ratings, electrical characteristics, and switching behavior parameters.
This document provides information on FBR12 series miniature relays, including:
1) The relays come in standard, high dielectric, and high sensitivity models with various coil voltages and contact materials.
2) Specifications include contact arrangement, ratings, coil data, dimensions, life expectancy, and temperature ranges.
3) Charts show maximum switching capacity, operating temperature and voltage ranges, and distributions of operate/release voltages and times.
This document summarizes the specifications and characteristics of the TPC8014 transistor. Key details include:
1) It is a small footprint, low RDS(on) MOSFET designed for portable equipment applications like notebooks.
2) Electrical characteristics include a typical RDS(on) of 11 mΩ and typical forward transfer admittance of 10 S.
3) Absolute maximum ratings include a drain-source voltage of 30V and drain current of 11A.
The document summarizes an low-profile relay model called G5RL that is suitable for various applications. It has several models including standard, low noise, high inrush, and high capacity. Key specifications include a height of 15.7mm, 8mm creepage distance, 10kV impulse withstand voltage. It provides information on ordering, ratings for coils and contacts, characteristics, dimensions, and engineering data.
This document provides specifications for the Power PCB Relay G2R, including:
- It is available in non-latching and latching models with contact configurations including 1-pole and 2-pole.
- Models include general purpose, high capacity, and high sensitivity options with silver alloy contacts.
- Electrical ratings include maximum switching capacity, operating voltage/current, and minimum load.
- Performance specifications cover operate/release times, bounce time, frequency, insulation/dielectric strength.
- Environmental ratings include temperature, humidity, vibration, and shock resistance.
- Dimensions and weight are provided for each model.
This document describes infrared temperature sensors. It provides details on their features such as temperature range, rugged housing, optics, outputs, and power specifications. It also lists available sensor models with different output types, housings, cable lengths, and accessories, along with their prices. The document concludes with a two-year limited warranty statement.
This document provides data and specifications for the CF 750 GaAs MMIC.
The CF 750 is a bi-polar GaAs FET intended for use in mixer and amplifier applications from 400 MHz to 3 GHz. It has low power consumption of 2 mA typical operating current. Key specifications include power gain from 10-11 dB, noise figure from 1.6-1.9 dB, and third order intercept points from -1 to 10 dBm. Electrical characteristics are provided for common source, amplifier, and mixer applications. Package and pinout diagrams are also included.
The document provides information about proximity switches including:
1. It describes different types of proximity switches that cover a wide range of requirements with different functions, outputs, and connections.
2. The switches have features like easy to use, wide operating voltage range, short circuit protection, and an IP66 enclosure rating.
3. Specifications include a sensing distance range, target materials, power supply voltage, current consumption, and vibration/shock resistance.
This document provides specifications for a silicon carbide power MOSFET. Key details include:
- It has a maximum drain-source voltage of 1200V, on-resistance of 160 mΩ, and gate charge of 47 nC.
- Features include industry-leading on-resistance, high speed switching, low capacitances, easy paralleling, simple drive requirements, and RoHS compliance.
- Benefits are higher system efficiency, reduced cooling needs, avalanche ruggedness, and increased switching frequency. Applications include solar inverters, high voltage DC/DC converters, and motor drives.
This document provides product information for a 3rd Generation thinQ! Silicon Carbide Schottky Diode. Some key details:
1) It uses revolutionary Silicon Carbide semiconductor material, providing switching behavior benchmarks, no reverse/forward recovery, and temperature independent switching.
2) It has a breakdown voltage of 600V, forward current of 10A, and capacitive charge of 16nC.
3) It is optimized for fast switching applications like power supplies, motor drives, solar, and UPS systems.
ultra slim relays embody the latest in compact relay design technology you can find anywhere in the world market. Only a few of the world`s top players are able to produce this kind of high performance fully sealed type of relays.
Original N-Channel Mosfet 2SK3484 3484 16A 100V TO-252 New Renesas ElectronicsAUTHELECTRONIC
This document provides specifications for the 2SK3484 N-channel MOS field effect transistor (MOSFET) including:
- Electrical characteristics such as on-state resistance, gate cut-off voltage, and input/output capacitances.
- Thermal characteristics such as thermal resistance and power dissipation derating curves.
- Switching characteristics such as turn-on/off delay times and rise/fall times.
- Package drawings and equivalent circuit diagram for the TO-251 and TO-252 packages.
This document discusses the design of an energy efficient sub-threshold multiplication and accumulation (MAC) unit for low power digital signal processing applications. It describes the following:
1. The technologies used including 90nm pass transistor technology and Cadence and Synopsys design tools.
2. The objectives of the project which are to design an energy efficient circuit in 90nm technology emphasizing sub-threshold operation and gaining expertise in design tools.
3. An overview of sub-threshold operation of MOS transistors and models for sub-threshold current and power consumption showing significant reductions in dynamic, static, and short circuit power at sub-threshold voltages.
4. Challenges of sub-threshold design including
Temple of Asclepius in Thrace. Excavation resultsKrassimira Luka
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...TechSoup
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Js
1. FTR-K1 SERIES
POWER RELAY
1 POLE - 8A Medium Load Control
JS Series
n FEATURES
l class B (130°C) coil wire insulation
UL
l form A (SPST-NO) or 1 form C (SPDT) contact
1
Low profile and space saving
l
- Height: 12.5 mm - Mounting space: 290 mm2
High sensitivity in small package
l
- Operating power 110 to 140 mW
- Nominal power 220 to 290 mW
High insulation in small package
l
- Insulation distance : 8.0 mm (between coil and contacts)
- Dielectric strength : 5,000 VAC - Surge strength : 10,000 V
Plastic materials
l
- UL 94 flame class V-0 - UL CTI level class 2
Plastic sealed type
l
Various contact material options
l
RoHS compliant. Please see page 6 for more information
l
n PARTNUMBER INFORMATION
JS - 12 M E - K T - V3 *
[Example] (a) (b) (c) (d) (e) (f ) (g)
(a) Relay type JS : JS-Series
(b) Coil rated voltage 12 : 5.....60 VDC
Coil rating table at page 3
(c) Contact configuration Nil : 1 form C (SPDT)
M : 1 form A (SPST-NO)
(d) Contact material Nil : Gold plate silver cadmium oxide
D : Silver nickel
E : Silver cadmium oxide
F : Gold plate silver nickel
N : Gold plate silver tin oxide
(e) Enclosure K : Plastic sealed type
(f) Construction Nil : 3.2mm
T : 5.0mm (only JS-MN)
(g) Gold plating Nil : 0.3µ gold overlay (available with Nil, N and F contact)
V3 : 3.0µ gold overlay for lower current applications (available with
Nil and N contact, not available for T, 5.0mm type)
Note: Actual marking omits the hyphen (-) or (*)
*: V3 is marked at different position on the relay
E.g.: Ordering code: JS-12E-K Actual marking: JS12E-K 1
2. FTR-K1 JS SERIES
SERIES
n SPECIFICATION
Item Non V3 type V3 type
JS - ( ) - K JS - ( ) - K
JS - ( ) D/E/F/N - K JS - ( ) N - K
Contact Data Configuration 1 form A (SPST-NO), 1 form C (SPDT)
Construction Single
Material (see part number information) 0.3μ Au plated 3μ Au plated
Resistance (initial) Max. 100 mΩ at 6VDC, 1A Max. 30 mΩ at 6VDC, 1A
Contact rating 8A, 250VAC / 24VDC
Max. carrying current 10A
Max. switching voltage 400VAC / 150VDC
Max. switching power 2,000VA / 192W
Min. switching load * 100mA, 5VDC 10mA, 5VDC
6
Life Mechanical Min. 20 x 10 operations
Min. 100 x 103 operations (AgCd)
AC contact rating
Min. 50 x 103 operations (AgSnO2)
(resistive load)
Min. 20 x 103 operations (AgNi)
Electrical
Min. 100 x 103 operations (AgCd)
DC contact rating
Min. 50 x 103 operations (AgSnO2)
(resistive load)
Min. 20 x 103 operations (AgNi)
Coil Data Rated power (at 20 °C) 220 - 290mW
Operate power (at 20 °C) 110 - 140mW
Operating temperature range -40 °C to +85 °C (no frost)
Timing Data Operate (at nominal voltage) Max. 10ms (no bounce)
Release (at nominal voltage) Max. 5ms (no diode, no bounce)
Insulation Resistance (initial) Min. 1,000MΩ at 500VDC
Dielectric strength Open contacts 1,000VAC (50/60Hz) 1min
Contacts to coil 5,000VAC (50/60Hz) 1min
Surge strength Coil to contacts 10,000V / 1.2 x 50µs standard wave
Clearance 8 mm
Creepage 8 mm
EN61810-1, VDE0435 Voltage 250V
Pollution degree 3
Material group III a
Category C / 250V (reference voltage) (VDE 01106)
Other Misoperation>1us 10 - 55 - 10 Hz double amplitude 1.65mm
Vibration resistance
Endurance 10 - 55 - 10 Hz double amplitude 3.3mm
Min. 100m/s² (11 ± 1ms) 3 directions; 36 shocks (18
Misoperation>1us
with coil energizing, 18 no coil energizing)
Shock
Min. 1,000m/s² (6 ± 1ms) 3 directions, no coil
Endurance
energizing 18 shocks
Weight Approximately 8.0 g
* Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual
load before production since reference values may vary according to switching frequencies, environmental conditions
and expected reliability levels.
2
3. FTR-K1 JS SERIES
SERIES
n COIL RATING
Rated Coil Must Operate Must Release
Coil Coil Resistance Max. Coil Voltage Rated Power
Voltage Voltage Voltage
Code +/- 10% (Ohm) (VDC) (mW)
(VDC) (VDC) * (VDC) *
5 5 112 3.5 0.5 11.8
6 6 160 4.2 0.6 14.1 225
9 9 360 6.3 0.9 21.2
12 12 660 8.5 1.2 28.3 220
18 18 1,455 12.7 1.8 42.4 225
24 24 2,350 16.8 2.4 56.6 245
48 48 8,000 33.4 4.8 105.6
290
60 60 12,500 41.7 6.0 132.0
Note: All values in the table are valid for 20°C and zero contact current.
* Specified operate values are valid for pulse wave voltage.
n SAFETY STANDARDS
Type Compliance Contact rating
UL UL 508 Flammability: UL 94-V0 (plastics)
Contact material: Nil, E N D, F
E 56140
8A 24VDC (resistive) 100k 8A 24VDC (resistive) 100k 8A, 24VDC
CSA C22.2 No. 14 8A, 250VAC (resistive) 100k 8A, 250VAC (resistive) 100k 8A, 250VAC
LR 35579 10A, 30VDC (resistive) 10A, 30VDC (resistive)
10A, 250VAC (resistive) 10A, 250VAC (resistive)
1/4HP, 125VAC / 250VAC 1/4HP, 125VAC / 250VAC
1/3HP, 125VAC 1/3HP, 125VAC
1/2HP, 250VAC 1/2HP, 250VAC
Pilot duty: C150, B300 Pilot duty: A300, B300
Pilot duty: 0.27A, 250VDC C150, R300
VDE 0435, 0631, 0700, 8A 250VAC (cos φ=1) JS-( )D-K, JS-( )F-K:
40013847 8A 24VDC (0 ms) 6A, 250VAC, (cos φ=1)
JS-( )MD-K, JS-( )MF-K:
8A, 250VAC
SEMKO EN 61058-1 + A1: 1993 Rated voltage (V): 250 - -
EN 61095:1993 + A11 Rated current (A): 8 (2) or 8
Also complies with SEV, ÖVE, FIMKO, BSI, CQC, NEMKO, DEMKO
3
5. FTR-K1 JS SERIES
SERIES
n DIMENSIONS Unit: mm
JS-MK
l Dimensions l Schematics l PC board mounting
hole layout
(BOTTOM VIEW)
JS-K
l Dimensions l Schematics l PC board mounting
hole layout
(BOTTOM VIEW)
JS-MN-KT
l Dimensions l Schematics l PC board mounting
hole layout
(BOTTOM VIEW)
5
6. FTR-K1 JS SERIES
SERIES
RoHS Compliance and Lead Free Information
1. General Information
l All signal and power relays produced by Fujitsu Components are compliant with RoHS directive 2002/95EC including
amendments.
l Cadmium as used in electrical contacts is exempted from the RoHS directives on October 21st, 2005.
(Amendment to Directive 2002/95/EC)
l All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info for older date codes
at: http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf
l Lead free solder plating on relay terminals is Sn-3.0Ag-0.5Cu, unless otherwise specified.
This material has been verified to be compatible with PbSn assembly process.
2. Recommended Lead Free Solder Profile
l Recommended solder Sn-3.0Ag-0.5Cu.
Flow Solder condition:
Pre-heating: maximum 120˚C
Soldering: dip within 5 sec. at
260˚C solder bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration: maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated.
4. Tin Whiskers
l Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length
whisker was found by our in house test.
6