This document reviews optimization of annular fins by modifying their geometry with and without perforations. It begins with an abstract discussing how fins dissipate heat and how their efficiency can be improved by increasing length, changing geometry, or adding more fins. It then discusses types of fins and their applications. The main body discusses how heat transfer occurs in fins and classifications of fins. It reviews literature on optimizing annular fin performance by varying materials, geometry, perforations, and other factors. The conclusion is that further optimization of annular fins is still possible in these and other ways. The future scope discusses analyzing perforated fins of different shapes and materials to further optimize efficiency and effectiveness.
Design and Analysis of Fin-X Technology Nitish Sharma
This document is all about Analysis on Fin-X Technology. Dr. Thomas Povey, an scientist working in Oxford University implemented this idea in Cookwares.
Design and Analysis of Fin-X Technology Nitish Sharma
This document is all about Analysis on Fin-X Technology. Dr. Thomas Povey, an scientist working in Oxford University implemented this idea in Cookwares.
Enhancement of Heat Transfer and Thermo-Hydraulic Performance Using Triangula...IJERA Editor
Solar heat has been thrust area of research to explore renewable energy utilisation for the past few decades. In
solar air heaters artificial roughness is tried on the surface of the absorber plate by adding small roughness
elements to enhance the heat transfer rate. In the present work triangular protrusion are provided to act as
roughness elements over the surface of the aluminum absorber plate. The experimental study is carried out on
the effect of change in apex angle of protrusions on the heat transfer rate by keeping the other design parameters
unchanged. Maximum heat transfer rate and thermo-hydraulic performance between the range of apex angle 300
and 600 is studied. The Nusselt number is between 50 and 110, friction factor 4.5-6.7x10-3, Stanton number is 6-
14x10-3. The heat transfer rate and thermo-hydraulic performance are observed to be maximum for 450 apex
angle and least for the 600 plate.
An experimental investigation of annular fins under forced convectioneSAT Journals
Abstract
Heat transfer characteristics under forced convection are investigated experimentally by varying parameters like surface area,
base-to-ambient temperature difference and Reynolds number. To investigate the performance of fins experimentally, fins made of
aluminium (high thermal conductivity) are taken. For varying the surface area fin with 11 mm diameter without circumferential
fins, fin with 31 mm diameter and annular fins of 31 mm diameter are taken as specimens. Base to ambient temperature difference
is varied with the aid of dimmerstat ranging from 25W to 45W. Reynolds number is also varied by varying the velocities of air.
Velocities are varied by the aid of fan. Then these fins are tested under different load conditions, different Reynolds number by
varying the surface area of fins increase the rate of heat transfer. With the variation of relevant parameters under forced
convection heat transfer rates are analyzed experimentally. Experiments are conducted by using the annular fins, fin with
diameter 11mm without circumferential fins and fin with diameter 31mm at different Reynolds number and loads under forced
convection and comparison is made between fins. Experimental results shows that forced convection heat transfer rate from fins
depend on surface areas, base ambient temperature difference and Reynolds number. The base temperature for annular fins is
reduced by 30% when compared to fin with diameter 11mm due to increase in surface area about 40%. The base temperature for
annular fins is reduced by 10% when compared to fin with diameter of 31mm due to decrease in surface area about 41%. It is
also observed that at higher heat load i.e., 45W, the overall fin efficiency of annular fins is increased by 44% and 8% compared to
fin with diameter of 11mm and 31mm respectively. At higher Reynolds number range 800-2000, heat transfer rate increases in
annular fins due to more number of air molecules get in contact with the heated surface
HEAT TRANSFER AUGMENTATION IN A PLATE-FIN HEAT EXCHANGER: A REVIEWIAEME Publication
The improvement of the performance of heat exchangers with gas as the working fluid becomes particularly important due to the high thermal resistance offered by gases in general. In order to compensate for the poor heat transfer properties of gases, the surface area density of plate heat exchangers can be increased by making use of the secondary fins such as, off-set fins, triangular fins, wavy fins, louvered fins etc. In addition, a promising technique for the enhancement of heat transfer is the use of longitudinal vortex generators. The longitudinal vortices are produced due to the pressure difference generated between the front and back surface of the vortex generator.
Computational analysis of heat transfer through four-stroke S. I. engine finsijsrd.com
it is important for an air-cooled engine to utilize fins for effective engine cooling to maintain uniform temperature in the cylinder periphery. Many experimental works has been done to improve the heat release of the cylinder and fin efficiency. In this study, heat release of an IC engine cylinder cooling with straight fins and with wavy fins is calculated numerically using commercially available CFD tool ANSYS. The IC engine is initially at 500⁰C and the heat release from the cylinder is analysed at a wind velocity of 60 km/hr to 100 km/hr. The heat release from both the cylinders is compared. With the help of the available numerically results, the design of the I. C. engine cooling fins can be modified for improving the heat release and efficiency.
Review of heat transfer augmentation for cooling of turbine blade tip by geom...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
Design and experimental analysis of pipe in pipe heat exchangerIJMER
Pipe in pipe heat exchanger are used in industrial process to recover heat between two
process fluids. The project carried out design of pipe in pipe heat exchanger having tube with fin and
without fin. The fins were taken in the form of semi-circular type arranged in altenating way with
spacing of 50mm.The fins were only provided on the inner tube for creating turbulence of cold water.
The number of fin were 18 and its height and thickness 10 and 1.6mm respectively. Experiment were
performed for heat exchanger with fins and without fins. The experiment were performed for different
flow rates of hot and cold fluid Different parameters like Overall heat transfer,Nusselt
number,Convective heat transfer coefficient,Pressure drop,friction factor were obtained and compared
for simple inner tube and finned tube.
Heat Transfer Analysis and Optimization of Engine Cylinder Fins of Varying Ge...IOSR Journals
: The main aim of the project is to analyze the thermal properties by varying geometry, material and
thickness of cylinder fins. Parametric models of cylinder with fins have been developed to predict the transient
thermal behavior. The models are created by varying the geometry, rectangular, circular and curved shaped
fins and also by varying thickness of the fins. The 3D modeling software used is Pro/Engineer.The analysis is
done using ANSYS. Presently Material used for manufacturing cylinder fin body is Aluminum Alloy 204 which
has thermal conductivity of 110-150W/mk. We are analyzing the cylinder fins using this material and also using
Aluminum alloy 6061 and Magnesium alloy which have higher thermal conductivities.
Enhancement of Heat Transfer and Thermo-Hydraulic Performance Using Triangula...IJERA Editor
Solar heat has been thrust area of research to explore renewable energy utilisation for the past few decades. In
solar air heaters artificial roughness is tried on the surface of the absorber plate by adding small roughness
elements to enhance the heat transfer rate. In the present work triangular protrusion are provided to act as
roughness elements over the surface of the aluminum absorber plate. The experimental study is carried out on
the effect of change in apex angle of protrusions on the heat transfer rate by keeping the other design parameters
unchanged. Maximum heat transfer rate and thermo-hydraulic performance between the range of apex angle 300
and 600 is studied. The Nusselt number is between 50 and 110, friction factor 4.5-6.7x10-3, Stanton number is 6-
14x10-3. The heat transfer rate and thermo-hydraulic performance are observed to be maximum for 450 apex
angle and least for the 600 plate.
An experimental investigation of annular fins under forced convectioneSAT Journals
Abstract
Heat transfer characteristics under forced convection are investigated experimentally by varying parameters like surface area,
base-to-ambient temperature difference and Reynolds number. To investigate the performance of fins experimentally, fins made of
aluminium (high thermal conductivity) are taken. For varying the surface area fin with 11 mm diameter without circumferential
fins, fin with 31 mm diameter and annular fins of 31 mm diameter are taken as specimens. Base to ambient temperature difference
is varied with the aid of dimmerstat ranging from 25W to 45W. Reynolds number is also varied by varying the velocities of air.
Velocities are varied by the aid of fan. Then these fins are tested under different load conditions, different Reynolds number by
varying the surface area of fins increase the rate of heat transfer. With the variation of relevant parameters under forced
convection heat transfer rates are analyzed experimentally. Experiments are conducted by using the annular fins, fin with
diameter 11mm without circumferential fins and fin with diameter 31mm at different Reynolds number and loads under forced
convection and comparison is made between fins. Experimental results shows that forced convection heat transfer rate from fins
depend on surface areas, base ambient temperature difference and Reynolds number. The base temperature for annular fins is
reduced by 30% when compared to fin with diameter 11mm due to increase in surface area about 40%. The base temperature for
annular fins is reduced by 10% when compared to fin with diameter of 31mm due to decrease in surface area about 41%. It is
also observed that at higher heat load i.e., 45W, the overall fin efficiency of annular fins is increased by 44% and 8% compared to
fin with diameter of 11mm and 31mm respectively. At higher Reynolds number range 800-2000, heat transfer rate increases in
annular fins due to more number of air molecules get in contact with the heated surface
HEAT TRANSFER AUGMENTATION IN A PLATE-FIN HEAT EXCHANGER: A REVIEWIAEME Publication
The improvement of the performance of heat exchangers with gas as the working fluid becomes particularly important due to the high thermal resistance offered by gases in general. In order to compensate for the poor heat transfer properties of gases, the surface area density of plate heat exchangers can be increased by making use of the secondary fins such as, off-set fins, triangular fins, wavy fins, louvered fins etc. In addition, a promising technique for the enhancement of heat transfer is the use of longitudinal vortex generators. The longitudinal vortices are produced due to the pressure difference generated between the front and back surface of the vortex generator.
Computational analysis of heat transfer through four-stroke S. I. engine finsijsrd.com
it is important for an air-cooled engine to utilize fins for effective engine cooling to maintain uniform temperature in the cylinder periphery. Many experimental works has been done to improve the heat release of the cylinder and fin efficiency. In this study, heat release of an IC engine cylinder cooling with straight fins and with wavy fins is calculated numerically using commercially available CFD tool ANSYS. The IC engine is initially at 500⁰C and the heat release from the cylinder is analysed at a wind velocity of 60 km/hr to 100 km/hr. The heat release from both the cylinders is compared. With the help of the available numerically results, the design of the I. C. engine cooling fins can be modified for improving the heat release and efficiency.
Review of heat transfer augmentation for cooling of turbine blade tip by geom...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
Design and experimental analysis of pipe in pipe heat exchangerIJMER
Pipe in pipe heat exchanger are used in industrial process to recover heat between two
process fluids. The project carried out design of pipe in pipe heat exchanger having tube with fin and
without fin. The fins were taken in the form of semi-circular type arranged in altenating way with
spacing of 50mm.The fins were only provided on the inner tube for creating turbulence of cold water.
The number of fin were 18 and its height and thickness 10 and 1.6mm respectively. Experiment were
performed for heat exchanger with fins and without fins. The experiment were performed for different
flow rates of hot and cold fluid Different parameters like Overall heat transfer,Nusselt
number,Convective heat transfer coefficient,Pressure drop,friction factor were obtained and compared
for simple inner tube and finned tube.
Heat Transfer Analysis and Optimization of Engine Cylinder Fins of Varying Ge...IOSR Journals
: The main aim of the project is to analyze the thermal properties by varying geometry, material and
thickness of cylinder fins. Parametric models of cylinder with fins have been developed to predict the transient
thermal behavior. The models are created by varying the geometry, rectangular, circular and curved shaped
fins and also by varying thickness of the fins. The 3D modeling software used is Pro/Engineer.The analysis is
done using ANSYS. Presently Material used for manufacturing cylinder fin body is Aluminum Alloy 204 which
has thermal conductivity of 110-150W/mk. We are analyzing the cylinder fins using this material and also using
Aluminum alloy 6061 and Magnesium alloy which have higher thermal conductivities.
Experimental Analysis Of Heat Transfer From Square Perforated Fins In Stagger...IJERA Editor
This project gives the experimental analysis of heat transfer over a flat surface equipped with Square perforated
pin fins in staggered arrangement in a rectangular channel. The Fin dimensions are 100mm in height & 25mm in
width. The range of Reynolds number is fixed & about 13,500– 42,000, the clearance ratio (C/H) 0, 0.33 and 1,
the inter-fin spacing ratio (Sy /D) 1.208, 1.524, 1.944 and 3.417. Sy i.e. stream wise distance is varies and Sx i.e.
span wise distance is constant. The friction factor, enhancement efficiency and heat transfer correlate in
equations with each other. Here we are comparing Square pin fins with cylindrical pin fins. Staggered
arrangement and perforation will enhance the heat transfer rate. Clearance ratio and inter-fin spacing ratio affect
on Enhancement efficiency. Both lower clearance ratio and lower inter-fin spacing ratio and comparatively lower
Reynolds number give higher thermal performance. Friction factor & Nusselt number are Key parameter which
relates with efficiency enhancement and heat transfer rate.
experimental investigation of heat transfer intensification of pin fins under...INFOGAIN PUBLICATION
Recent development era in technology has huge requirement of high performance lightweight, and compact heat transfer equipment. To accomplish this demand fins are widely used as effective elements for heat transfer enhancement. One of the commonly used heat exchanger fins is the pin fin which offers an economical and trouble free solution in many situations. This is more important in cooling of air conditioning equipment, thermal power plants, gas turbine blade, aerospace industry, combustion chamber liners, and biomedical devices, electrical and electronic component. Therefore now a day’s industries are utilizing thermal system with pin fins and analyse the various influencing parameters on performance of pin fin of different geometry under force convection. The turbulence occurred due to these techniques are good enough to enhance heat transfer rate. This article is focused on comprehensive review of work carried out in this technology.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Similar to IRJET- Optimization of Annular Fins by Modifying its Geometry with and Without Perforations: A Review (20)
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.