India National Policy for Electric Vehicle and Road and Highway Electric Vehicle Charging Infra is already published .
Our Government Announce Attractive Subsidy for Customers OEM and also who are into Electric Vehicle Charging and Supporting Infrastructure.
They have advised Govt Agencies who are into Power Generation , Transmission and Distribution , Oil and Gas Distribution Infra Companies to invest&Support Electric Vehicle Charging Infrastructures .
Maximum State has issued&Implementing EV Policy by Smart City ,Municipal Corporation ,Road Transportation&other Public Fleet.
Demand of Power Supply will be High as per EV Charger Installation &Separate Transformer 600V should be installed on Public Charging for 4Wheeler and Buses.
Solar PV Power ,High Energy Battery Storage&Wind Power will be benefit on Highways .
Link Vue System can offer Support for products ,Supply&Installation Electrical Safety (Earthing,Surge Protection). Automation ,Networking , Connectors ,Cables&High Energy Power Storage Systems.
Write or Contact : Mahesh Chandra Manav M-9811247237 manav.chandra@linkvuesystem.com
Inviting OEM of Electric Vehicles, Battery Bank , Electric Vehicle Charging ,EPC Companies and Other Govt&Private involving EV Infra projects .
EV Ka Jamana Hey Environment ko Bachana Hey
Distributed energy units cannot be directly integrated into the power grid due to their inherently varying output. An interfacing technology is required. The power electronic interface is used for connecting distributed energy resources to the smart grid. It can also be used in any type of electric vehicles. It does not store energy in its circuitry. It receives power from the distributed energy source and converts it to power at the required voltage and frequency. This paper provides a brief introduction on power electronic interface. Matthew N. O. Sadiku | Adedamola A. Omotoso | Sarhan M. Musa "Power Electronic Interface" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29394.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29394/power-electronic-interface/matthew-n-o-sadiku
Grid Interconnection of Renewable Energy Sources at the Distribution Level Wi...Pradeep Avanigadda
Renewable energy resources (RES) are being increasingly
connected in distribution systems utilizing power electronic
converters. This paper presents a novel control strategy for
achieving maximum benefits from these grid-interfacing inverters
when installed in 3-phase 4-wire distribution systems. The inverter
is controlled to perform as a multi-function device by incorporating
active power filter functionality. The inverter can thus be
utilized as: 1) power converter to inject power generated from
RES to the grid, and 2) shunt APF to compensate current unbalance,
load current harmonics, load reactive power demand and
load neutral current. All of these functions may be accomplished
either individually or simultaneously. With such a control, the
combination of grid-interfacing inverter and the 3-phase 4-wire
linear/non-linear unbalanced load at point of common coupling
appears as balanced linear load to the grid. This new control
concept is demonstrated with extensive MATLAB/Simulink simulation
studies and validated through digital signal processor-based
laboratory experimental results.
Index Terms—Active power filter
GRID INTERCONNECTION OF RENEWABLE ENERGY SOURCES AT DISTRIBUTION LEVEL WITH P...Pradeep Avanigadda
Renewable energy resources (RES) are being increasingly connected in distribution systems utilizing power electronic converters. This project presents a novel control strategy for achieving maximum benefits from these grid-interfacing inverters when installed in 3-phase 4-wire distribution systems. The inverter is controlled to perform as a multi-function device by incorporating active power filter functionality. The inverter can thus be utilized as: 1) power converter to inject power generated from RES to the grid, and 2) shunt APF to compensate current unbalance, load current harmonics, load reactive power demand and load neutral current. All of these functions may be accomplished either individually or simultaneously. With such a control, the combination of grid-interfacing inverter and the 3-phase 4-wire linear/non-linear unbalanced load at point of common coupling appears as balanced linear load to the grid. This new control concept is demonstrated with extensive MATLAB/ Simulink simulation studies and validated through digital signal processor-based laboratory experimental results.
This slides are the Ph.D. work presentation on Active Power Filter design and implementation for harmonic elimination in micro-grid and electric vehicle
India National Policy for Electric Vehicle and Road and Highway Electric Vehicle Charging Infra is already published .
Our Government Announce Attractive Subsidy for Customers OEM and also who are into Electric Vehicle Charging and Supporting Infrastructure.
They have advised Govt Agencies who are into Power Generation , Transmission and Distribution , Oil and Gas Distribution Infra Companies to invest&Support Electric Vehicle Charging Infrastructures .
Maximum State has issued&Implementing EV Policy by Smart City ,Municipal Corporation ,Road Transportation&other Public Fleet.
Demand of Power Supply will be High as per EV Charger Installation &Separate Transformer 600V should be installed on Public Charging for 4Wheeler and Buses.
Solar PV Power ,High Energy Battery Storage&Wind Power will be benefit on Highways .
Link Vue System can offer Support for products ,Supply&Installation Electrical Safety (Earthing,Surge Protection). Automation ,Networking , Connectors ,Cables&High Energy Power Storage Systems.
Write or Contact : Mahesh Chandra Manav M-9811247237 manav.chandra@linkvuesystem.com
Inviting OEM of Electric Vehicles, Battery Bank , Electric Vehicle Charging ,EPC Companies and Other Govt&Private involving EV Infra projects .
EV Ka Jamana Hey Environment ko Bachana Hey
Distributed energy units cannot be directly integrated into the power grid due to their inherently varying output. An interfacing technology is required. The power electronic interface is used for connecting distributed energy resources to the smart grid. It can also be used in any type of electric vehicles. It does not store energy in its circuitry. It receives power from the distributed energy source and converts it to power at the required voltage and frequency. This paper provides a brief introduction on power electronic interface. Matthew N. O. Sadiku | Adedamola A. Omotoso | Sarhan M. Musa "Power Electronic Interface" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29394.pdfPaper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29394/power-electronic-interface/matthew-n-o-sadiku
Grid Interconnection of Renewable Energy Sources at the Distribution Level Wi...Pradeep Avanigadda
Renewable energy resources (RES) are being increasingly
connected in distribution systems utilizing power electronic
converters. This paper presents a novel control strategy for
achieving maximum benefits from these grid-interfacing inverters
when installed in 3-phase 4-wire distribution systems. The inverter
is controlled to perform as a multi-function device by incorporating
active power filter functionality. The inverter can thus be
utilized as: 1) power converter to inject power generated from
RES to the grid, and 2) shunt APF to compensate current unbalance,
load current harmonics, load reactive power demand and
load neutral current. All of these functions may be accomplished
either individually or simultaneously. With such a control, the
combination of grid-interfacing inverter and the 3-phase 4-wire
linear/non-linear unbalanced load at point of common coupling
appears as balanced linear load to the grid. This new control
concept is demonstrated with extensive MATLAB/Simulink simulation
studies and validated through digital signal processor-based
laboratory experimental results.
Index Terms—Active power filter
GRID INTERCONNECTION OF RENEWABLE ENERGY SOURCES AT DISTRIBUTION LEVEL WITH P...Pradeep Avanigadda
Renewable energy resources (RES) are being increasingly connected in distribution systems utilizing power electronic converters. This project presents a novel control strategy for achieving maximum benefits from these grid-interfacing inverters when installed in 3-phase 4-wire distribution systems. The inverter is controlled to perform as a multi-function device by incorporating active power filter functionality. The inverter can thus be utilized as: 1) power converter to inject power generated from RES to the grid, and 2) shunt APF to compensate current unbalance, load current harmonics, load reactive power demand and load neutral current. All of these functions may be accomplished either individually or simultaneously. With such a control, the combination of grid-interfacing inverter and the 3-phase 4-wire linear/non-linear unbalanced load at point of common coupling appears as balanced linear load to the grid. This new control concept is demonstrated with extensive MATLAB/ Simulink simulation studies and validated through digital signal processor-based laboratory experimental results.
This slides are the Ph.D. work presentation on Active Power Filter design and implementation for harmonic elimination in micro-grid and electric vehicle
Energy Management and the Evolution of Intelligent Motor Control and Drives @...ARC Advisory Group
Energy Management and the Evolution of Intelligent Motor Control and Drives @ ARC's 2011 Industry Forum by Craig Resnick.
Intelligent motor control & drives once provided a safe, flexible & centralized means to control & protect motors
•Today, these devices have evolved to ‘smart’ energy managers that bring advances ranging from complex drive systems to basic control of fan or pump motors
•In high demand where uptime & equipment reliability are critical, in applications where even a short period of downtime can prove extremely costly & damaging
•These devices perform critical protective & troubleshooting functions & detailed diagnostics to help improve productivity & minimize downtime
The inverter is the principal part of the photovoltaic (PV) systems that assures the direct current/alternating current (DC/AC) conversion (PV array is connected directly to an inverter that converts the DC energy produced by the PV array into AC energy that is directly connected to the electric utility). In this paper, we present a simple method for detecting faults that occurred during the operation of the inverter. These types of faults or faults affect the efficiency and cost-effectiveness of the photovoltaic system, especially the inverter, which is the main component responsible for the conversion. Hence, we have shown first the faults obtained in the case of the short circuit. Second, the open circuit failure is studied. The results demonstrate the efficacy of the proposed method. Good monitoring and detection of faults in the inverter can increase the system's reliability and decrease the undesirable faults that appeared in the PV system. The system behavior is tested under variable parameters and conditions using MATLAB/Simulink.
A brief and basic presentation of interconnections of pwer system,it covers all the basic aspects of power system interconnection that how systems can be built with interconnections
Many wireless sensor network (WSN) applications, nowadays, require real-time communication, which demands cautious design consideration to resolve inherent conflicts between energy efficiency and the need to meet Quality of Services (QoS), such as end-to-end delay communications. Numerous innovative solutions are proposed such as Real-time Power-Aware Routing (RPAR) protocol, which dynamically adapts transmission power to meet specified communication delays at low energy cost. Hence, to enable real-time communication with RPAR protocol, an adaptive Power Management Circuit (PMC) using hybrid energy harvester to support WSN real-time communication is proposed. In this paper, a high-level architecture of the proposed PMC is discussed, which consists of Thermal Energy Generator (TEG), and Piezoelectric Energy Harvester (PEG) as energy providers, with low-power Maximum Power Point Tracking (MPPT) feature enabled. Preliminary simulations which analyze and characterize TEG and PEG system are conducted separately to determine the optimal design parameters to support the conventional WSN QoS requirement. Next, both systems will be integrated into a single PMC implementation prior to fabrication and lab characterization.
How HE Results In Cost Saving - an Eltek Case StudyEltek
Major UK Wireless Carriers Reduce Power Consumption and Operating
Expense with High Efficiency Power Systems from Eltek Valere
An Eltek Valere Case Study
Many carriers are realizing increasing power consumption and costs as they
move to new content- and data-oriented services and expand their wireless
networks to include 3G and 4G technologies. Managing this power consumption
is a critical initiative for these carriers to stay cost competitive. Increasingly,
carriers are evaluating power system technology as a key part of their efforts
toward making a significant impact on power consumption, because
approximately 80% of the power consumed by a telecommunications carrier
passes through these devices.
Energy Management and the Evolution of Intelligent Motor Control and Drives @...ARC Advisory Group
Energy Management and the Evolution of Intelligent Motor Control and Drives @ ARC's 2011 Industry Forum by Craig Resnick.
Intelligent motor control & drives once provided a safe, flexible & centralized means to control & protect motors
•Today, these devices have evolved to ‘smart’ energy managers that bring advances ranging from complex drive systems to basic control of fan or pump motors
•In high demand where uptime & equipment reliability are critical, in applications where even a short period of downtime can prove extremely costly & damaging
•These devices perform critical protective & troubleshooting functions & detailed diagnostics to help improve productivity & minimize downtime
The inverter is the principal part of the photovoltaic (PV) systems that assures the direct current/alternating current (DC/AC) conversion (PV array is connected directly to an inverter that converts the DC energy produced by the PV array into AC energy that is directly connected to the electric utility). In this paper, we present a simple method for detecting faults that occurred during the operation of the inverter. These types of faults or faults affect the efficiency and cost-effectiveness of the photovoltaic system, especially the inverter, which is the main component responsible for the conversion. Hence, we have shown first the faults obtained in the case of the short circuit. Second, the open circuit failure is studied. The results demonstrate the efficacy of the proposed method. Good monitoring and detection of faults in the inverter can increase the system's reliability and decrease the undesirable faults that appeared in the PV system. The system behavior is tested under variable parameters and conditions using MATLAB/Simulink.
A brief and basic presentation of interconnections of pwer system,it covers all the basic aspects of power system interconnection that how systems can be built with interconnections
Many wireless sensor network (WSN) applications, nowadays, require real-time communication, which demands cautious design consideration to resolve inherent conflicts between energy efficiency and the need to meet Quality of Services (QoS), such as end-to-end delay communications. Numerous innovative solutions are proposed such as Real-time Power-Aware Routing (RPAR) protocol, which dynamically adapts transmission power to meet specified communication delays at low energy cost. Hence, to enable real-time communication with RPAR protocol, an adaptive Power Management Circuit (PMC) using hybrid energy harvester to support WSN real-time communication is proposed. In this paper, a high-level architecture of the proposed PMC is discussed, which consists of Thermal Energy Generator (TEG), and Piezoelectric Energy Harvester (PEG) as energy providers, with low-power Maximum Power Point Tracking (MPPT) feature enabled. Preliminary simulations which analyze and characterize TEG and PEG system are conducted separately to determine the optimal design parameters to support the conventional WSN QoS requirement. Next, both systems will be integrated into a single PMC implementation prior to fabrication and lab characterization.
How HE Results In Cost Saving - an Eltek Case StudyEltek
Major UK Wireless Carriers Reduce Power Consumption and Operating
Expense with High Efficiency Power Systems from Eltek Valere
An Eltek Valere Case Study
Many carriers are realizing increasing power consumption and costs as they
move to new content- and data-oriented services and expand their wireless
networks to include 3G and 4G technologies. Managing this power consumption
is a critical initiative for these carriers to stay cost competitive. Increasingly,
carriers are evaluating power system technology as a key part of their efforts
toward making a significant impact on power consumption, because
approximately 80% of the power consumed by a telecommunications carrier
passes through these devices.
Power Quality Improvement with Multilevel Inverter Based IPQC for MicrogridIJMTST Journal
A micro grid is a hybrid power system consists of several distributed resources and local loads .Now a
days with increasing on a day to day life micro grid plays a vital role in power generation using Renewable
Energy Sources. Usage of power electronic devices in a micro grid results in harmonic generation and leads to
various power quality issues. Inorder to overcome voltage fluctuations and over current a magnetic flux
control based variable reactor is proposed. The performance of IPQC can be verified by using
MATLAB/SIMULINK`
Implementation of a grid-tied emergency back-up power supply for medium and l...IJECEIAES
Emergency back-up power supply units are necessary in case of grid power shortage, considerably poor regulation and costly establishment of a power system facility. In this regard, power electronic converters based systems emerge as consistent, properly controlled and inexpensive electrical energy providers. This paper presents an implemented design of a grid-tied emergency back-up power supply for medium and low power applications. There are a rectifier-link boost derived DC-DC battery charging circuit and a 4-switch push-pull power inverter (DC-AC) circuit, which are controlled by pulse width modulation (PWM) signals. A changeover relay based transfer switch controls the power flow towards the utility loads. During off-grid situations, loads are fed power by the proposed system and during on-grid situations, battery is charged by an AC-link rectifier-fed boost converter. Charging phenomenon of the battery is controlled by a relay switched protection circuit. Laboratory experiments are carried out extensively for different loads. Power quality assessments along with back-up durations are recorded and analyzed. In addition, a cost allocation affirms the economic feasibility of the proposed framework in case of reasonable consumer applications. The test-bed results corroborate the reliability of the research work.
Modeling Optimization Voltage Index Unified Power Flow Controller Equivalent ...IJMTST Journal
This paper presents an active-reactive power control strategy for voltage source converters (VSCs) based on derivation of the direct and quadrature components of the VSC output current. The proposed method utilizes a multivariable proportional-integral controller and provides almost completely decoupled control capability of the active and reactive power with almost full disturbance rejection due to step changes in the power exchanged between the VSC and the grid. It also imposes fast transient response and zero steady-state error as compared to the conventional power control approaches. The applicability of the proposed power control strategy for providing the robust stability of the system against the uncertainties of the load parameters is also investigated. The superiority of the proposed control strategy over conventional approaches in the new condition of supplying the load is demonstrated. The theoretical aspects of the proposed multivariable-based power control strategy and the conventional approaches are reviewed and simulation results are presented in two separate sections. MATLAB/Simulink 2009a is used to simulate different scenarios of the simulation.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.