This document presents a system called the Electromagnetic Accident Avoiding System that is intended to reduce road accidents. The system uses an electromagnetic cylinder actuator to control a vehicle's bumper. Ultrasonic and PIR sensors detect obstacles and determine if they are living or non-living. If a non-living obstacle is detected, the electromagnetic cylinder actuates to extend the bumper forward to absorb impact forces during a collision. The system is designed to reduce the frequency and severity of accidents on roads by dissipating impact forces when vehicles collide with stationary objects.
Controlling and Reducing of Speed for Vehicles Automatically By Using Rf Tech...IJERA Editor
For vehicle safety and safety for passengers in vehicle is an important parameter. Most of the vehicles get
accident because no proper safety measures are taken especially at curves and hair pin bends humps and any
obstacles in front of the vehicle. This system can be used for the prevention of such a problem by indicating a
pre indication and also reducing the speed of vehicles by reducing the fuel rate of vehicle. As the action is in
terms of fuel rate so the vehicle automatically goes to control and avoids the accidents. At curves and hair pin
bends the line of sight is not possible for the drivers so the special kind of transmitter which is tuned at a
frequency of 433MHZ are mounted as these transmitters continuously radiate a RF signal for some particular
area. As the vehicle come within this radiation the receiver in the vehicle gets activate. The transmitter used here
is a coded transmitter which is encoded with encoder. The encoder provides a 4 bit binary data which is serially
transmitted to transmitter. The transmitter used here is ASK type (amplitude shift keying) which emits the RF
radiation.
Controlling and Reducing of Speed for Vehicles Automatically By Using Rf Tech...IJERA Editor
For vehicle safety and safety for passengers in vehicle is an important parameter. Most of the vehicles get
accident because no proper safety measures are taken especially at curves and hair pin bends humps and any
obstacles in front of the vehicle. This system can be used for the prevention of such a problem by indicating a
pre indication and also reducing the speed of vehicles by reducing the fuel rate of vehicle. As the action is in
terms of fuel rate so the vehicle automatically goes to control and avoids the accidents. At curves and hair pin
bends the line of sight is not possible for the drivers so the special kind of transmitter which is tuned at a
frequency of 433MHZ are mounted as these transmitters continuously radiate a RF signal for some particular
area. As the vehicle come within this radiation the receiver in the vehicle gets activate. The transmitter used here
is a coded transmitter which is encoded with encoder. The encoder provides a 4 bit binary data which is serially
transmitted to transmitter. The transmitter used here is ASK type (amplitude shift keying) which emits the RF
radiation.
automatic braking system and brake actuation before collisonashutosh singh
In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.
Remote Operated Shutter System with Fingerprint Lockijtsrd
The ultimate purpose of this project is to develop a remote controlled rolling shutter using a sensor. In this project the main objective is the shutter operate as manual and also motor, this is two in one process. In the project the bevel gear mechanism is used to sensor this type is INFRARED. This remote control is used to ON OFF the motor. The final outcomes the project is the running the shutter using remote control. The scope of the project is to reduce the manual work and human injuries due to shutter operation. Prof. S. J. Kulkarni | Prof. S. N. Jadhav | Prof. Dhavale M. R. ""Remote Operated Shutter System with Fingerprint Lock"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23435.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23435/remote-operated-shutter-system-with-fingerprint-lock/prof-s-j-kulkarni
As we know that in India 50-60% of the population owns the two wheelers, In 2019 the domestic sells of the two wheelers were quite higher, since it is the most sold vehicle in India because of its low price, But now a days it is the most unsafe vehicle because of the reason of safety, As we know that accidents are increasing day by day, we can also notice that many laws and protocols are implemented by government in order to avoid this accidents. Accidents can be known as the unplanned event or the mistake that may occur causing in injury and sometimes it also leads to death. The accidents in case of two wheelers are more related to other vehicles. This may be avoided by wearing helmets and riding vehicles without consuming liquor. Since this survey is on smart helmet for accidence prevention and also we examining various related techniques. This research also helps us to understand IOT technology which is being developed now a days. Smart Helmet is the intelligent system that detects automatically whether the person is wearing the helmet and has nonalcoholic breath while driving. Here we have a transmitter on the helmet and the receiver on the bike. There is a switch used to assured the wearing of helmet on the head. The ON condition of the switch ensures the placing of the helmet in proper way. An alcohol sensor is placed near the mouth, the engine shouldn’t ON if any condition is violated, when the rider met with an accident and the helmet hits the ground then sensor sense and give the information to main controller it will activate the GSM Module which automatically sends the message to the family member.
automatic braking system and brake actuation before collisonashutosh singh
In this project the pneumatic bumper and brake is used to protect the man and vehicle. This system is only activated when any obstacle comes in front of vehicle, the obstacle is sensed by sensor and it gives the signal to the control unit and due to this bumper system and braking system activated. Bumper is energized by compressor and it compressed the air and send it to the pneumatic piston. This system is used in any type of light vehicles.
Remote Operated Shutter System with Fingerprint Lockijtsrd
The ultimate purpose of this project is to develop a remote controlled rolling shutter using a sensor. In this project the main objective is the shutter operate as manual and also motor, this is two in one process. In the project the bevel gear mechanism is used to sensor this type is INFRARED. This remote control is used to ON OFF the motor. The final outcomes the project is the running the shutter using remote control. The scope of the project is to reduce the manual work and human injuries due to shutter operation. Prof. S. J. Kulkarni | Prof. S. N. Jadhav | Prof. Dhavale M. R. ""Remote Operated Shutter System with Fingerprint Lock"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23435.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23435/remote-operated-shutter-system-with-fingerprint-lock/prof-s-j-kulkarni
As we know that in India 50-60% of the population owns the two wheelers, In 2019 the domestic sells of the two wheelers were quite higher, since it is the most sold vehicle in India because of its low price, But now a days it is the most unsafe vehicle because of the reason of safety, As we know that accidents are increasing day by day, we can also notice that many laws and protocols are implemented by government in order to avoid this accidents. Accidents can be known as the unplanned event or the mistake that may occur causing in injury and sometimes it also leads to death. The accidents in case of two wheelers are more related to other vehicles. This may be avoided by wearing helmets and riding vehicles without consuming liquor. Since this survey is on smart helmet for accidence prevention and also we examining various related techniques. This research also helps us to understand IOT technology which is being developed now a days. Smart Helmet is the intelligent system that detects automatically whether the person is wearing the helmet and has nonalcoholic breath while driving. Here we have a transmitter on the helmet and the receiver on the bike. There is a switch used to assured the wearing of helmet on the head. The ON condition of the switch ensures the placing of the helmet in proper way. An alcohol sensor is placed near the mouth, the engine shouldn’t ON if any condition is violated, when the rider met with an accident and the helmet hits the ground then sensor sense and give the information to main controller it will activate the GSM Module which automatically sends the message to the family member.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.