1) The document analyzes and designs a 5-story residential building using STAAD PRO and ETABS software. It also performs manual design calculations as per Indian codes.
2) The building is modeled, analyzed for dead, live, wind, and seismic loads according to Indian codes. Beams, columns, slabs, and foundations are designed using software and manually.
3) Results of the analysis such as beam, column, and footing dimensions and reinforcement details are presented. The document concludes that software design reduces time and improves accuracy compared to manual design.
Design and analysis of reinforced concrete multistory commercial building usi...Estisharaat Company
Design of multistory building by solving a sample manually ans rest of the building by solving on autodesk robot analysis, complete detailing of r.c members,final year project,complete ,how to design slabs, how to design beams, how to design rc column, how to make final year project, design of stairs,how to design foundations , how to prepare a project before using it in software for analysis,
Design of multi storey building resting on single columneSAT Journals
Abstract The aim of the project is to analyze and design of multi-storey building resting on the single column by using different code
provisions. A lay out plan of the proposed building is drawn by using AUTO CADD 2010.The structure consist of ground floor
plus five floors, each floor having the one house .Staircase must be provides separately. The planning is done as per Indian
standard code provisions. The building frames are analyzed using the various text books. Using this so many standard books
analysis of bending moment, shear force, deflection, end moments and foundation reactions are calculated. Detailed structural
drawings for critical and typical R.C.C. members are also drawn. Co-ordinates for all structural members are tabulated for ready
reference.
Keywords: Multi Story Building, Single Column, Staircase.
Design and analysis of reinforced concrete multistory commercial building usi...Estisharaat Company
Design of multistory building by solving a sample manually ans rest of the building by solving on autodesk robot analysis, complete detailing of r.c members,final year project,complete ,how to design slabs, how to design beams, how to design rc column, how to make final year project, design of stairs,how to design foundations , how to prepare a project before using it in software for analysis,
Design of multi storey building resting on single columneSAT Journals
Abstract The aim of the project is to analyze and design of multi-storey building resting on the single column by using different code
provisions. A lay out plan of the proposed building is drawn by using AUTO CADD 2010.The structure consist of ground floor
plus five floors, each floor having the one house .Staircase must be provides separately. The planning is done as per Indian
standard code provisions. The building frames are analyzed using the various text books. Using this so many standard books
analysis of bending moment, shear force, deflection, end moments and foundation reactions are calculated. Detailed structural
drawings for critical and typical R.C.C. members are also drawn. Co-ordinates for all structural members are tabulated for ready
reference.
Keywords: Multi Story Building, Single Column, Staircase.
Construction stage analysis of rcc frames project reportSayyad Wajed Ali
While analyzing a multistorey building frame, conventionally all the probable loads are applied after modeling the entire building frame. But in practice the frame is constructed in various stages. Accordingly, the stability of frame varies at every construction stage. Even during construction freshly placed concrete floor is supported by previously cast floor by formwork. Thus, the loads assumed in conventional analysis will vary in transient situation. Obviously, results obtained by the traditional analysis will be unsuitable. Therefore, the frame should be analyzed at every construction stage taking into account variation in loads. The phenomenon known as Construction Stage Analysis considers these uncertainties precisely. This paper analyzes several numbers of multistorey reinforced concrete building frames of different bay width and length, storey height and number of stories using STAADpro, followed by the construction stage analysis of each model. Also all full frame models are analyzed for earthquake forces in Zone - II (IS 1893 : 2002). Finally, a comparative study of Axial forces, Bending moments, Shear forces and Twisting moments was done at every storey for full frame model (without earthquake forces) and construction stage model (without earthquake forces).
Design of G+8 RCC Training Institute & Hostel Blockjeyanthi4
The building is located in seismic zone V and the basic wind speed in this location is 55m/s. The preliminary gravity and lateral load analysis are carried out manually for a typical 2D frame and compared with software results. The member sizes for beams and columns were found out from the preliminary manual analysis and design. 3D finite element modeling was carried out in ETABS for the building. Based on the analytical results (moment, shear force), the member sizes are finalized and design was carried out as per the codes IS 456, SP16, IS 13920. Ductile design and detailing is carried out as per IS 13920 & SP34.
Construction stage analysis of rcc frames project reportSayyad Wajed Ali
While analyzing a multistorey building frame, conventionally all the probable loads are applied after modeling the entire building frame. But in practice the frame is constructed in various stages. Accordingly, the stability of frame varies at every construction stage. Even during construction freshly placed concrete floor is supported by previously cast floor by formwork. Thus, the loads assumed in conventional analysis will vary in transient situation. Obviously, results obtained by the traditional analysis will be unsuitable. Therefore, the frame should be analyzed at every construction stage taking into account variation in loads. The phenomenon known as Construction Stage Analysis considers these uncertainties precisely. This paper analyzes several numbers of multistorey reinforced concrete building frames of different bay width and length, storey height and number of stories using STAADpro, followed by the construction stage analysis of each model. Also all full frame models are analyzed for earthquake forces in Zone - II (IS 1893 : 2002). Finally, a comparative study of Axial forces, Bending moments, Shear forces and Twisting moments was done at every storey for full frame model (without earthquake forces) and construction stage model (without earthquake forces).
Design of G+8 RCC Training Institute & Hostel Blockjeyanthi4
The building is located in seismic zone V and the basic wind speed in this location is 55m/s. The preliminary gravity and lateral load analysis are carried out manually for a typical 2D frame and compared with software results. The member sizes for beams and columns were found out from the preliminary manual analysis and design. 3D finite element modeling was carried out in ETABS for the building. Based on the analytical results (moment, shear force), the member sizes are finalized and design was carried out as per the codes IS 456, SP16, IS 13920. Ductile design and detailing is carried out as per IS 13920 & SP34.
REPORT ON G+4 RCC HOSTEL BUILDING ANALYSIS AND DESIGN USING STAAD PRO SOFTWARERakeshDas161
REPORT ON G+4 RCC HOSTEL BUILDING IN ( SEISMIC ZONE 5 ) ANALYSIS AND DESIGN USING STAAD PRO SOFTWARE
PREPARED BY RAKESH DAS AND HIS GROUP
DEPARTMENT OF CIVIL ENGINEERING
GIRIJANANDA CHOWDHURY INSTITUTE OF MANAGEMENT AND TECHNOLOGY GUWAHATI ASSAM
this is project is about the design and analysis of framed structure.this is the report of dispensry of maloya.the intrested 1 may tke the drawing of this structure from PEC chandigarh.students may take help from this report.this is made by me aman bains,student of chandigarh university.thnxz alot frnds.may this will help u too
Estimation and Evaluation of G+3 Residential Buildingvivatechijri
Any construction project to begin with starts with the Layout of the building or structure followed by
Design and Analysis of the structure which is succeeded by cost estimation and planning for the said project. This
project involves the layout, design, analysis, planning and cost estimation of a G+3 residential building located
in Bhiwandi. The layout of the proposed G+3 residential building is based on a plot of size 18X15M. Previously
the plot was being used as a commercial complex, but according to the new plan it will be used as a multi-storied
residential building. The ground floor of the building will be used as parking while the remaining 3 floors will be
divided into 6 apartments each having an area of 2BHK & 1BHK 60.97sqm & 48.25sqm. Each apartment is of
2BHK and 1BHK configuration.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.