This document discusses the implementation of lean tools and ergonomic aspects in designing a caravan. Some key lean tools implemented include poka-yoke, 5S, kaizen, and takt time. Poka-yoke was used to mistake-proof the pipe bending process. 5S organized the workspace and tools. Kaizen improved the pipe bending and drilling processes by reducing search time and stabilizing pipes. Takt time was calculated to determine production rates needed to meet customer demand. Overall, implementing these lean tools helped reduce production time by 10-15 minutes per day and improve quality, productivity, and efficiency.
Development of fixture_to_reduce_the_cycle_time_of_c_8_griding_machineLaukik Raut
“What a difference a second makes” – a quote from an empowered employee. Just one second over a ten
second continuous cycle can mean your line runs consistently 10% faster, the difference between comfortably
achieving tight production schedules or continually being capacity constrained.[1] This work presents a new
approach for the reduction of process cycle time and its impact on a company's competitive edge. Reduction in
cycle time has been gaining significant attention in recent times. The shorter cycle times effect in higher
consumer satisfaction, lower manufacturing rate, higher yield, and better potential given tool inventory and
facility constraints. This research paper provides a brief review of core approaches related to cycle time and
also describes a methodology for cycle time reduction in any manufacturing and automobile production
industry. It includes the assessment and potential gains of the projected cycle time reduction methodology
The Impact of Lean Production on the Cycle Time: A Case Study of a Welding As...ijsrd.com
The growing global competition is forcing the organisations to reduce the cost for increasing the profit. Lean manufacturing is a powerful tool for attaining this. The history of lean manufacturing starts from the craft production of 1900's. It is evolved through the contributions of F.W. Taylor, Henry Ford, Eiji Toyoda & Taiichi Ohno. The main concept of the lean manufacturing is the reduction in cost by eliminating waste. However, not all lean implementations have produced such results. In this study, a critical examination of lean manufacturing implementation experience at the welding department of a medium size industry located in Kerala, India. . Cycle time reduction is an important way by eliminating or reducing non-value-added activities. To reduce the overall cycle time of manufacturing, the cycle time of each sub-assembly needs to be reduced. Reducing cycle time will have a significant impact on a company's bottom line when implemented. The outcome of this study leads to substantial reduction in cycle time, reduced defects, better utilization of human resource and machines, and reduced cost of maintenance. It has been proved and validated by an empirical relation. The cause and effect diagram is used for analysing the cycle time reduction. The Quality control chart is also used. The improved return on investment (ROI) and reduction in cycle time shows the feasibility. The data for this study were obtained through interviews, Questionnaire survey and archival sources.
Development of fixture_to_reduce_the_cycle_time_of_c_8_griding_machineLaukik Raut
“What a difference a second makes” – a quote from an empowered employee. Just one second over a ten
second continuous cycle can mean your line runs consistently 10% faster, the difference between comfortably
achieving tight production schedules or continually being capacity constrained.[1] This work presents a new
approach for the reduction of process cycle time and its impact on a company's competitive edge. Reduction in
cycle time has been gaining significant attention in recent times. The shorter cycle times effect in higher
consumer satisfaction, lower manufacturing rate, higher yield, and better potential given tool inventory and
facility constraints. This research paper provides a brief review of core approaches related to cycle time and
also describes a methodology for cycle time reduction in any manufacturing and automobile production
industry. It includes the assessment and potential gains of the projected cycle time reduction methodology
The Impact of Lean Production on the Cycle Time: A Case Study of a Welding As...ijsrd.com
The growing global competition is forcing the organisations to reduce the cost for increasing the profit. Lean manufacturing is a powerful tool for attaining this. The history of lean manufacturing starts from the craft production of 1900's. It is evolved through the contributions of F.W. Taylor, Henry Ford, Eiji Toyoda & Taiichi Ohno. The main concept of the lean manufacturing is the reduction in cost by eliminating waste. However, not all lean implementations have produced such results. In this study, a critical examination of lean manufacturing implementation experience at the welding department of a medium size industry located in Kerala, India. . Cycle time reduction is an important way by eliminating or reducing non-value-added activities. To reduce the overall cycle time of manufacturing, the cycle time of each sub-assembly needs to be reduced. Reducing cycle time will have a significant impact on a company's bottom line when implemented. The outcome of this study leads to substantial reduction in cycle time, reduced defects, better utilization of human resource and machines, and reduced cost of maintenance. It has been proved and validated by an empirical relation. The cause and effect diagram is used for analysing the cycle time reduction. The Quality control chart is also used. The improved return on investment (ROI) and reduction in cycle time shows the feasibility. The data for this study were obtained through interviews, Questionnaire survey and archival sources.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.