View step-by-step instructions for connecting your DVR to the LAN, along with screen shots.
http://www.supercircuits.com/resources/learn/dvr-networking-guide/connecting-your-dvr-to-the-lan
This PowerPoint presentation provides an overview of programmable logic controller (PLC) hardware. It covers the different components of a PLC system, including the CPU, input/output modules, power supply, and communication interfaces. The presentation also discusses the functions of each hardware element and their importance in industrial automation and control systems.
Dokumen B Project Mandiri Ball on Beam with Stand Alone PID ControllerLuqman Al Labib
Merupakan kompilasi dari dokumen B100 sampai dengan B600 dari Project Mandiri berjudul Sistem Keseimbangan Bola di Atas Papan / Ball on Beam Project.
Oleh :
Luqman Al Labib
Program Studi D4 Teknik Elektronika
Politeknik Negeri Bandung
2017
India's greatest threat is the safety of its women. Women do not feel safe in a variety of situations. This needs to be addressed as quickly as feasible. Technology evolves and develops on a daily basis, affecting how people live. As a result, the focus of this article is on modernising the technological framework in order to strengthen women's safety mechanisms. We introduce a new security method in this study to protect women during unusual behaviours. A new security technique based on a patrolling robot using the Raspberry Pi has been proposed. In this case, a night vision camera can be employed to secure any location. Various machine learning methods are applied to improve the classifier's accuracy. The findings suggest that the suggested method outperforms existing methods.
This PowerPoint presentation provides an overview of programmable logic controller (PLC) hardware. It covers the different components of a PLC system, including the CPU, input/output modules, power supply, and communication interfaces. The presentation also discusses the functions of each hardware element and their importance in industrial automation and control systems.
Dokumen B Project Mandiri Ball on Beam with Stand Alone PID ControllerLuqman Al Labib
Merupakan kompilasi dari dokumen B100 sampai dengan B600 dari Project Mandiri berjudul Sistem Keseimbangan Bola di Atas Papan / Ball on Beam Project.
Oleh :
Luqman Al Labib
Program Studi D4 Teknik Elektronika
Politeknik Negeri Bandung
2017
India's greatest threat is the safety of its women. Women do not feel safe in a variety of situations. This needs to be addressed as quickly as feasible. Technology evolves and develops on a daily basis, affecting how people live. As a result, the focus of this article is on modernising the technological framework in order to strengthen women's safety mechanisms. We introduce a new security method in this study to protect women during unusual behaviours. A new security technique based on a patrolling robot using the Raspberry Pi has been proposed. In this case, a night vision camera can be employed to secure any location. Various machine learning methods are applied to improve the classifier's accuracy. The findings suggest that the suggested method outperforms existing methods.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận văn đồ án tốt nghiệp với đề tài: Thiết kế giao diện người – máy, cho các bạn làm luận văn tham khảo
Intelligent transportation systems (ITS) are advanced applications which, without embodying intelligence as such, aim to provide innovative services relating to different modes of transport and traffic management and enable various users to be better informed and make safer, more coordinated, and 'smarter' use of transport networks
Automatic Railway Gate Control System Using Androidijtsrd
The project is designed to control over the railway level crossing gate using Android mobile phone by the gate keeper. Opening and closing of railway level crossing gate involves manpower, which could be often causes incorrect leading to accidents. This system prevents the need of any human involvement at the railway level crossing. This system involves opening and closing of the level crossing gate by using an Android app. This Remote operation is achieved by any smart-phone Tablet etc., with Android OS, upon a Graphical User Interface based touch screen operation. A Bluetooth device is interfaced with the system. When the gate keeper sent command to close from the Android application device when the train is approaching at the level crossing to the Bluetooth device which while supply to the microcontroller, sends an output signal which activates a mechanism to switch on the motor to close the gate. To open the gate, another command needs to be sent for the microcontroller to open the gate using motor driver integrated circuit. In this project we use a microcontroller of 8051 families, and the input to its Bluetooth device which takes command from the user Android application. The output to microcontroller is given to a motor by using a motor driver integrated circuit for some required operation. The status, whether the gate is open or close is displayed on an LCD liquefied crystal display interfaced to the microcontroller. Miss. Snehal Patil | Miss. Komal Jadhav | Miss. Rutuja Chinchawde | Miss. Aditi Patil | Mr. Sagar V. Chavan "Automatic Railway Gate Control System Using Android" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18741.pdf
Ebook yang menjelaskan dasar-dasar jaringan secara ringkas dan praktis, dimulai dari pengenalan topologi jaringan, alokasi ip address, sampai ke penerapan jaringan komputer menggunakan Linux ClearOS.
"Automatic Intelligent Plant Irrigation System using Arduino and GSM board"Disha Modi
Automatic irrigation is a form of irrigation system that incorporates the theory of control, power of wireless technology and feedback system with irrigation. The aim of our project is not only to minimize this manual intervention by the farmer in farm field, but also to successfully water garden plants planted in pots too. Which is why we are using micro- controller based Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is done only when there is not enough moisture in the soil and the microcontroller decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers and helps, as they don’t have to go and turn the pump on/off manually. 3)This irrigation system can be monitor by user wirelessly. User can receive notification and can provide proper commands via his cell phone whenever necessary.
Survey of energy-efficient solutions in NetworkOlivier Zheng
Since 2000, the growth of IT has increased in a radical way, to become the first carbon dioxide producer. It is at this time that people start to think about the global warming and the bad effect of the carbon dioxide. Everybody try to reduce his carbon dioxide footprint. Today, computers are connected to a network. So the main actors in IT (manufacturers, organisations...) start to work on solution to decrease the Network’s footprint.
In this paper, different non-commercial energy-efficient solutions are described: the 802.3az standard, the EMAN framework, the energy-efficiency metrics and the MiDORi network. Each solution is focused on a particular part of the Network (from the interface, to the global design), it has its advantages, but it has also its disadvantages. We’ll talk more about the disadvantages of each solution.
Each solution introduced in this paper will decrease the power consumption of the network. But to have the best results, the chosen solution will have to be implemented in the good way to have the best impact on the network power consumption: having Core layer routers with 802.3az ports won’t save more energy than having Access layer switches with 802.3az ports.
A presentation from the 'Interpretation for Digital and Mobile Platforms' workshop, for the MA Museology, Inter-University Postgraduate program in Thessaloniki.
Presentation given to Purdue University students about realizing the skills used in social situations are similar to those required to find, advance and enjoy a professional career.
Nhận viết luận văn Đại học , thạc sĩ - Zalo: 0917.193.864
Tham khảo bảng giá dịch vụ viết bài tại: vietbaocaothuctap.net
Download luận văn đồ án tốt nghiệp với đề tài: Thiết kế giao diện người – máy, cho các bạn làm luận văn tham khảo
Intelligent transportation systems (ITS) are advanced applications which, without embodying intelligence as such, aim to provide innovative services relating to different modes of transport and traffic management and enable various users to be better informed and make safer, more coordinated, and 'smarter' use of transport networks
Automatic Railway Gate Control System Using Androidijtsrd
The project is designed to control over the railway level crossing gate using Android mobile phone by the gate keeper. Opening and closing of railway level crossing gate involves manpower, which could be often causes incorrect leading to accidents. This system prevents the need of any human involvement at the railway level crossing. This system involves opening and closing of the level crossing gate by using an Android app. This Remote operation is achieved by any smart-phone Tablet etc., with Android OS, upon a Graphical User Interface based touch screen operation. A Bluetooth device is interfaced with the system. When the gate keeper sent command to close from the Android application device when the train is approaching at the level crossing to the Bluetooth device which while supply to the microcontroller, sends an output signal which activates a mechanism to switch on the motor to close the gate. To open the gate, another command needs to be sent for the microcontroller to open the gate using motor driver integrated circuit. In this project we use a microcontroller of 8051 families, and the input to its Bluetooth device which takes command from the user Android application. The output to microcontroller is given to a motor by using a motor driver integrated circuit for some required operation. The status, whether the gate is open or close is displayed on an LCD liquefied crystal display interfaced to the microcontroller. Miss. Snehal Patil | Miss. Komal Jadhav | Miss. Rutuja Chinchawde | Miss. Aditi Patil | Mr. Sagar V. Chavan "Automatic Railway Gate Control System Using Android" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-6 , October 2018, URL: http://www.ijtsrd.com/papers/ijtsrd18741.pdf
Ebook yang menjelaskan dasar-dasar jaringan secara ringkas dan praktis, dimulai dari pengenalan topologi jaringan, alokasi ip address, sampai ke penerapan jaringan komputer menggunakan Linux ClearOS.
"Automatic Intelligent Plant Irrigation System using Arduino and GSM board"Disha Modi
Automatic irrigation is a form of irrigation system that incorporates the theory of control, power of wireless technology and feedback system with irrigation. The aim of our project is not only to minimize this manual intervention by the farmer in farm field, but also to successfully water garden plants planted in pots too. Which is why we are using micro- controller based Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is done only when there is not enough moisture in the soil and the microcontroller decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers and helps, as they don’t have to go and turn the pump on/off manually. 3)This irrigation system can be monitor by user wirelessly. User can receive notification and can provide proper commands via his cell phone whenever necessary.
Survey of energy-efficient solutions in NetworkOlivier Zheng
Since 2000, the growth of IT has increased in a radical way, to become the first carbon dioxide producer. It is at this time that people start to think about the global warming and the bad effect of the carbon dioxide. Everybody try to reduce his carbon dioxide footprint. Today, computers are connected to a network. So the main actors in IT (manufacturers, organisations...) start to work on solution to decrease the Network’s footprint.
In this paper, different non-commercial energy-efficient solutions are described: the 802.3az standard, the EMAN framework, the energy-efficiency metrics and the MiDORi network. Each solution is focused on a particular part of the Network (from the interface, to the global design), it has its advantages, but it has also its disadvantages. We’ll talk more about the disadvantages of each solution.
Each solution introduced in this paper will decrease the power consumption of the network. But to have the best results, the chosen solution will have to be implemented in the good way to have the best impact on the network power consumption: having Core layer routers with 802.3az ports won’t save more energy than having Access layer switches with 802.3az ports.
A presentation from the 'Interpretation for Digital and Mobile Platforms' workshop, for the MA Museology, Inter-University Postgraduate program in Thessaloniki.
Presentation given to Purdue University students about realizing the skills used in social situations are similar to those required to find, advance and enjoy a professional career.
“Good writing is difficult. It takes a lot of practice and it can be very time consuming. And at the end of the process… you might not get your message across. The purpose of this presentation is not to convince you that writing is fun. Many of you will never think that writing is fun! Rather, the purpose of this presentation is to show you ways of maximizing your impact in print so that you get a better return on what you write.”
The presentation focuses on the importance of Omni-Channel Retailing, overcoming hurdles & how emerging unified platforms empower retailers to successfully adopt Omni-Channel strategy. This was presented by Ananth Padmanabhan in the event 'RetechCon' 2015.
3 January 2013 1ABCT Weekly Newsletter: please pass along to Soldiers, Family and Friends of 1ABCT. You can always stay up to date with local events by going to 1st Infantry Division page at http://www.riley.army.mil/default.aspx or if you are having issues reading this you can click on this link to read the weekly news. http://www.riley.army.mil/UnitPage.aspx?unit=1bct. We are always up and posting new information on FaceBook!
CPU224XP Ethernet borad
CPU224XP Digital 14input 10output/CPU226XP Digital 24input 16output
Analog 2 channel input/1 channel output
DC24V 1A
2 channel PPI port(support Modbus)
Comes with a perpetual calendar, which can be maintained for 2 years after power failure
PPI communication interface supports 187.5K, supports Modbus protocol
Up to 7 modules can be connected
Automatic saving of power-down data
Software supports all instructions in Siemens v4.0 Step 7
PLC Networking Basics using a Controllogix module also has an associated interactive youtube course that uses an intro project of networking multiple class laptops to a single Controllogix 5000 PLC/PAC. This powerpoint is for reference and additional information to supplement the course at http://www.youtube.com/watch?v=Au03psa9Vxk The PLC Networking Basics course has a total of 4 training modules (videos), each with it's own question at end, before directing you to next Controllogix tutorial. There is also an associated test for this training course at http://bin95.com/Employee-Training-Assessments/PLC-Training-Assessment/PLC-Networking-Basics-Controllogix.php
Hope you like and share, which will encourage us to create more of these free courses.
CSS L17 - DOS COMMANDS IN COMPUTER NETWORKINGMarvin Bronoso
CSS L17 - DOS COMMANDS IN COMPUTER NETWORKING
After this learning module the learners will be able to . . .
○ Apply the DOS commands in computer networking
○ Check network connectivity using PING command.
○ Checking the default gateway and IP address
3.7.10 Lab Use Wireshark to View Network TrafficRio Ap
Skenario soal latihan lengkap Lab 3.7.10 dari materi Cisco CCNA 1 v7. Untuk mengetahui kegunaan wireshark dalam mengcapture dan menganalisa traffic jaringan. Di skenario ini menggunakan protocol ICMP yang dipakai pada saat melakukan perintah Ping dari command line interface windows 10.
Dallas PD Nabs Car Thieves with Covert Vehicle Monitoring ProgramChristian Watson
Case study shows how the Dallas Police Department established a covert vehicle program that included covert vehicle monitoring systems to catch car thieves.
Take a look at the latest crime facts and statistics from the FBI and other agencies, so you can be prepared and stay projected.
http://www.supercircuits.com/resources/blog/learn-the-facts-about-crime
6 Steps To protect your baby’s IP camera from HACKERSChristian Watson
There are many ways that your baby can be unsafe that you aren't aware of, and hacking an IP camera is one way hackers can invade your privacy. Keep them safe by recognizing these 6 tips
Common tactics to circumvent illegal border crossing, and effective deterrents of law enforcement to combat them.
When border security comes to mind, people typically think of long lines at border crossing stations, fence lines, and the reported apprehension of illegal immigrants. Although those quintessential images accurately depict daily life at the border, they certainly don’t tell the whole story.
As a private, non-profit organization, Starr Ranch and its parent organization depend on private funding. Encouraging financial support is an ongoing objective at Starr Ranch. Programs and activities that involve and build a fan base from the larger community are essential.
One effective way to encourage people to conserve and support nature in general, and Starr Ranch in particular, is by engaging them virtually—with live video of wildlife living on the Sanctuary.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Neuro-symbolic is not enough, we need neuro-*semantic*Frank van Harmelen
Neuro-symbolic (NeSy) AI is on the rise. However, simply machine learning on just any symbolic structure is not sufficient to really harvest the gains of NeSy. These will only be gained when the symbolic structures have an actual semantics. I give an operational definition of semantics as “predictable inference”.
All of this illustrated with link prediction over knowledge graphs, but the argument is general.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Unsubscribed: Combat Subscription Fatigue With a Membership Mentality by Head...
DVR Networking: How to Connect Your DVR to the LAN
1. DVR Networking: Connecting Your DVR to the LAN
Complete this procedure to use a PC to view video from your DVR across a private network (LAN).
If you encounter a problem and need to contact Supercircuits Support, first complete the chart in
Table 1 about your Computer (PC) and DVR network settings, if possible. The Support Team will
need this information to provide assistance.
1. If the operating system of your PC is Windows Vista or Windows 7, skip to step 3.
2. Verify that your PC is using Windows XP Service Pack 3:
a) Click the Start button and then click My Computer.
b) In the My Computer window, click the System Task View system information, or open the
Control Panel list and open the System controls.
c) In the General tab of the System Properties window, check the System description. If it does
not show that you are using Service Pack 3 or later, update your system through Windows
Update or the Microsoft Download Center.
d) Close the System Properties and My Computer windows.
3. Determine the IP address, subnet mask, and default gateway of your PC and record it in Table
1. To get this information, do the following at the Windows desktop:
a) If the DOS command window is already open, skip to step 3d.
b) Open the Windows Start menu, then click Run to open the Run dialog box.
2. c) Type cmd in the entry field and then click OK to open the DOS command window.
d) At the command prompt, enter ipconfig. The PC will display Ethernet data associated with
your Ethernet adapter LAN connection.
e) Enter the IP Address, Subnet Mask, and Default Gateway for your PC’s Ethernet adapter
into Table 1.
4. Enter the model of your DVR into Table 1. The model
number is shown on the equipment tag on your DVR. It
may also appear on a packing slip, invoice, or shipping
box.
5. Enter the network information about your DVR into
3. Table 1. To get, or set, this information, do the following:
a) Use the Quick Start Guide provided with your DVR to perform the initial equipment
installation. Do not attach the network (LAN) cable to the DVR.
b) Power on the DVR and open the setup menu for “Network” options.
c) If DHCP settings are available for your DVR, set them to off or no instead of on or yes.
d) Next, select the IP Address option.
e) At your PC, find an IP address on your network that is not in use:
(a) Write down the EXACT IP address of your PC up to the third/last period. Using
the example shown above in the screen capture of ipconfig, this number would be:
192.168.1.
(b) After the third period, choose any number between 1 and 255 that is different
from the one in your PC’s IP address, 168. As a first try, let’s choose 200, which will
form the IP address 192.168.1.200.
(c) Next, use the ping command in the DOS window to see if that IP address is in use on
your network. The format of the ping command is: ping IP address
(d) To test your IP address, enter ping 192.168.1.200. Any reply received from the ping
indicates that a device on the network is already using this IP address and you can
connect to it.
(e) Examine the screen capture shown above. The message “Reply from
192.168.1.200: ..” indicates that your PC can reach the device with that IP address,
and that address is in use.
(f) Since the ping test of the IP address we tried showed the address was in use, try
another number between 1 and 255. For example, let’s ping 192.168.1.100. At the
DOS prompt, enter: ping 192.168.1.100
4. (g) Examine the screen capture shown above. The message “Request timed
out” indicates that your PC cannot reach the device with that IP address, and that
address is probably not in use. Enter this IP address in the DVR network setup
display. Also, enter this number into Table 1. If this trial indicated that 192.168.1.100
is in use as 192.168.1.200 is, try other IP address using the steps above until an
unused one is found.
f) At the DVR network setup display, enter Subnet
Mask and Default Gateway fields so that they
match those of your PC.
g) In the DVR network setup, if there is an option to
choose either DHCP or LAN, choose LAN.
h) Finally, use the table below to find the DVR’s suggested video port number. The suggested
port number is associated with the model number of the DVR as shown in Table 2.
5. 6. Save your settings and exit the DVR network setup
menu.
7. Turn off your DVR, then cable it to the LAN.
8. Wait about ten seconds, and then power on the
DVR. If the DVR is connected to a router, power off the
router, wait 15 seconds, and then restart the router, if
possible.
9. Open the DVR network setup window and verify that the all the configuration settings you made
earlier are in effect.
10. Return to the PC. Open a DOS command window.
11. At the command prompt, use the ping command to test your PC connection to the DVR and
to verify that the DVR is an active device on the LAN. Using the example above with the IP
address we chose, enter: ping 192.168.1.100 (The IP address you choose may be different.)
12. Examine the response from the ping command. A “Reply from ...” message indicates that
the IP address 192.168.1.100, that was previously inactive, is now active on the LAN, suggesting
that a LAN connection between your DVR and PC has been established.
13. Finally, load the application software that came with the DVR into your PC. When prompted,
enter the DVR IP address, port number (if required) and default password noted above (refer to
your DVR user manual). If you can view displays from your DVR, it is now setup for networking
capabilities across a LAN. If you can’t see displays from your DVR, review these procedures. Call
Support at 1.877.995.2288 for assistance.