This document provides an overview of the DOC software for electrical installation calculation and dimensioning. It describes:
- The aim of DOC is to assist with electrical calculations, single-line diagram drawing, device selection, and project documentation.
- DOC can be used by consultants, engineers, panel builders, installers, and ABB technical support. It supports calculations according to various international standards.
- DOC allows selection from a wide range of ABB medium voltage and low voltage products, including circuit breakers, switches, fuses, contactors and more.
- Key features include single-line diagram drawing, load flow calculations, cable sizing, short circuit calculations, and protection coordination checks. Workflows
Installation, Testing and Troubleshooting of TransformersLiving Online
This will provide you with practical knowledge (including tips, tricks and tools) covering the fundamentals of power transformers and their testing. It will greatly assist you in communicating more effectively with your electrical engineering colleagues. At the end of this workshop, participants will be familiar with the importance of transformer testing and their purpose, the different kinds of transformer tests and their procedures and the practical applications of principals applied in transformer operation and maintenance.
WHO SHOULD ATTEND?
This workshop will be appropriate for the following professionals:
Electrical engineers
Maintenance engineers
Maintenance supervisors
Power electricians
Power engineers
MORE INFORMATION: http://www.idc-online.com/content/installation-testing-and-troubleshooting-transformers-24
Installation, Testing and Troubleshooting of TransformersLiving Online
This will provide you with practical knowledge (including tips, tricks and tools) covering the fundamentals of power transformers and their testing. It will greatly assist you in communicating more effectively with your electrical engineering colleagues. At the end of this workshop, participants will be familiar with the importance of transformer testing and their purpose, the different kinds of transformer tests and their procedures and the practical applications of principals applied in transformer operation and maintenance.
WHO SHOULD ATTEND?
This workshop will be appropriate for the following professionals:
Electrical engineers
Maintenance engineers
Maintenance supervisors
Power electricians
Power engineers
MORE INFORMATION: http://www.idc-online.com/content/installation-testing-and-troubleshooting-transformers-24
Cable sizing to withstand short-circuit current - ExampleLeonardo ENERGY
A short circuit causes very extreme stresses in a cable which are proportional to the square of the current:
A temperature rise in the conducting components such as conductor, screen, metal sheath, armour. Indirectly the temperature of adjoining insulation and protective covers also increases,
electro-magnetic forces between the current-carrying components.
The temperature rise is important for its effect on ageing, heat pressure characteristics etc. and should be limited to a permissible short-circuit temperature. The thermo-mechanical effects of the current shall also be considered.
For the given short-circuit condition the short-circuit capacity of a cable should be investigated with respect to all these parameters. For multi-core cables in most instances the thermal effect - related to the magnitude of fault current and clearance time - is the critical parameter, since the cable will normally have enough mechanical strength. With single-core cables however the mechanical effect - related to the magnitude of the peak short-circuit current - is of such significance that, next to the thermal, the mechanical strength of both cable and its supports should be investigated.
Also accessories must be rated with respect to thermal and mechanical short-circuit stresses.
The short circuit strength of a cable system is not quantitatively defined with regard to permissible number of repeated short circuits, degree of deformation or destruction or impairment quality. It is expected, however, that a cable installation will remain safe in operation and that any deformation remains within tolerable limits even after several short circuits.
This course provides practical overview of short circuit performance of a cable.
Symmetrical Components
Symmetrical Component Analysis
Synthesis of Unsymmetrical Phases from Their Symmetrical Components
The Symmetrical Components of Unsymmetrical Phasors
Phase Shift of Symmetrical Components in or Transformer Banks
Power in Terms of Symmetrical Components
Transformer vector group_test_conditionsSARAVANAN A
Test Conditions for various vector groups commonly under use are listed along with pictorial representation. Assuming the reader has sufficient exposure to transformer winding connections.
Transformer Vector Group Test conditions
YNd1, YNd11, Dyn11, YNyn0and more
This directional over current relay employs the principle of actuation of the relay....It has a metallic disc free to rotate between the poles of two...
ABB software tool CAT DOC.
Product selection and configuration Quotation management.
CAT manages the creation of offers and detailed printouts, discount, markups, user and customer data with the flexibility needed to work in the best way.
Cable sizing to withstand short-circuit current - ExampleLeonardo ENERGY
A short circuit causes very extreme stresses in a cable which are proportional to the square of the current:
A temperature rise in the conducting components such as conductor, screen, metal sheath, armour. Indirectly the temperature of adjoining insulation and protective covers also increases,
electro-magnetic forces between the current-carrying components.
The temperature rise is important for its effect on ageing, heat pressure characteristics etc. and should be limited to a permissible short-circuit temperature. The thermo-mechanical effects of the current shall also be considered.
For the given short-circuit condition the short-circuit capacity of a cable should be investigated with respect to all these parameters. For multi-core cables in most instances the thermal effect - related to the magnitude of fault current and clearance time - is the critical parameter, since the cable will normally have enough mechanical strength. With single-core cables however the mechanical effect - related to the magnitude of the peak short-circuit current - is of such significance that, next to the thermal, the mechanical strength of both cable and its supports should be investigated.
Also accessories must be rated with respect to thermal and mechanical short-circuit stresses.
The short circuit strength of a cable system is not quantitatively defined with regard to permissible number of repeated short circuits, degree of deformation or destruction or impairment quality. It is expected, however, that a cable installation will remain safe in operation and that any deformation remains within tolerable limits even after several short circuits.
This course provides practical overview of short circuit performance of a cable.
Symmetrical Components
Symmetrical Component Analysis
Synthesis of Unsymmetrical Phases from Their Symmetrical Components
The Symmetrical Components of Unsymmetrical Phasors
Phase Shift of Symmetrical Components in or Transformer Banks
Power in Terms of Symmetrical Components
Transformer vector group_test_conditionsSARAVANAN A
Test Conditions for various vector groups commonly under use are listed along with pictorial representation. Assuming the reader has sufficient exposure to transformer winding connections.
Transformer Vector Group Test conditions
YNd1, YNd11, Dyn11, YNyn0and more
This directional over current relay employs the principle of actuation of the relay....It has a metallic disc free to rotate between the poles of two...
ABB software tool CAT DOC.
Product selection and configuration Quotation management.
CAT manages the creation of offers and detailed printouts, discount, markups, user and customer data with the flexibility needed to work in the best way.
Dear All,
Here i glad to introduced with a basics of Design Electrical which is helpfull to understand the concept of electrical.
I hope you like these concept & prefered the same.
Thanks& Regards,
Pankaj V. Chavan
( 95615 73214 )
Global Expert In Cable Joints Manufacturers & Supplierhemantkr012
Yamuna power was established in the year 1973.We have highly efficient network of supplying and manufacturing of cable wire jointing accessories all over world .
For more information www.yamunapower.com
Allied Wire & Cable, a leading specialty manufacturer and value-added distributor of electrical wire and cable, offers a Vendor Managed Inventory (VMI) program called C.H.I.M.P. This mobile-based VMI program automates the ordering of frequently used wire and cable products. Benefits include decreased stock-outages, improved inventory turnaround times, improved delivery performance, customized reporting and trend visibility. Let C.H.I.M.P. from Allied Wire & Cable manage your inventory so you don't have to!
This slide deck provides a brief overview on the company Augmensys and its product UBIK, which is enabling mobile data management with Augmented Reality support in industrial and enterprise scenarios. More information to be found at www.augmensys.com
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Let's dive deeper into the world of ODC! Ricardo Alves (OutSystems) will join us to tell all about the new Data Fabric. After that, Sezen de Bruijn (OutSystems) will get into the details on how to best design a sturdy architecture within ODC.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.