Energy is a very important variable that its conservation is of paramount interest to engineers of our time. As we know, the law of conservation of energy states that energy can neither be created nor destroyed, but it can be transformed from one form to another. This helps in sustainable use and protection of natural resources. This research work the Design and Implementation of a Solar Power System focuses on a technique of power generation from solar source. It provides simple basic theoretical studies of solar cell and its modelling techniques using equivalent electric circuits. Solar Photovoltaic PV power generation system is comprising several elements like solar cells, inverter, Battery charge controller and single phase inverter for AC loads are implemented in hardware in simple manner. Sylvester Emeka Abonyi | Kingsley Chibueze Obute | Anthony Amaechi Okafor "Design and Implementation of a Solar Power System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-3 , April 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49926.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/49926/design-and-implementation-of-a-solar-power-system/sylvester-emeka-abonyi
A transmission line is characterized by four parameters:
series resistance (R) due to conductor resistivity
shunt conductance (G) due to currents along insulator strings and corona; effect is small and usually neglected
series inductance (L) due to magnetic field surrounding the conductor
shunt capacitance (C) due to the electric field between the conductors
These are distributed parameters.
The parameters and hence the characteristics of cables differ significantly from those of overhead lines because the conductors in a cable are
much closer to each other
surrounded by metallic bodies such as shields, lead or aluminum sheets, and steel pipes
separated by insulating material such as impregnated paper, oil, or inert gas
The presentation discusses the various factors which affect the performance of Power Boilers including the quality of coal, airheater performance, air ingress etc.
This gives the full specification and working of a generator in a 500 MW power plant in which you will get a clear idea about how a generator works in a power plant.This was used in NTPC power plants all over INDIA according to their power generation capacity.
Presentation by Bushveld Energy at the African Solar Energy Forum in Accra, Ghana on 16 October 2019. The presentation covers four topics:
1) Overview of energy storage uses and technologies, including their current states of maturity;
2) Benefits to combining solar PV with storage, especially battery energy storage systems (BESS)
3) Examples from Bushveld’s experience in combining BESS with PV for commercial and industrial customers;
4) Introduction to Bushveld and its approach to BESS projects.
Contents of this presenation entitled 'Introduction of different Energy storage systems used in Electric & Hybrid vehicles' is useful for beginners and students
Turbo generator converts mechanical energy into electrical energy.
The Mechanical motion is generated in turbine by using heat in the form of saturated steam.It operates on the fundamental principles ofELECTROMAGNETIC INDUCTION.
Excitation System-The process of generating a magnetic field by means of an electric current is called excitation.
It provides power to the field windings thus produce field for rotor.
A transmission line is characterized by four parameters:
series resistance (R) due to conductor resistivity
shunt conductance (G) due to currents along insulator strings and corona; effect is small and usually neglected
series inductance (L) due to magnetic field surrounding the conductor
shunt capacitance (C) due to the electric field between the conductors
These are distributed parameters.
The parameters and hence the characteristics of cables differ significantly from those of overhead lines because the conductors in a cable are
much closer to each other
surrounded by metallic bodies such as shields, lead or aluminum sheets, and steel pipes
separated by insulating material such as impregnated paper, oil, or inert gas
The presentation discusses the various factors which affect the performance of Power Boilers including the quality of coal, airheater performance, air ingress etc.
This gives the full specification and working of a generator in a 500 MW power plant in which you will get a clear idea about how a generator works in a power plant.This was used in NTPC power plants all over INDIA according to their power generation capacity.
Presentation by Bushveld Energy at the African Solar Energy Forum in Accra, Ghana on 16 October 2019. The presentation covers four topics:
1) Overview of energy storage uses and technologies, including their current states of maturity;
2) Benefits to combining solar PV with storage, especially battery energy storage systems (BESS)
3) Examples from Bushveld’s experience in combining BESS with PV for commercial and industrial customers;
4) Introduction to Bushveld and its approach to BESS projects.
Contents of this presenation entitled 'Introduction of different Energy storage systems used in Electric & Hybrid vehicles' is useful for beginners and students
Turbo generator converts mechanical energy into electrical energy.
The Mechanical motion is generated in turbine by using heat in the form of saturated steam.It operates on the fundamental principles ofELECTROMAGNETIC INDUCTION.
Excitation System-The process of generating a magnetic field by means of an electric current is called excitation.
It provides power to the field windings thus produce field for rotor.
Modeling and Simulation of Grid Connected PV SystemYogeshIJTSRD
The paper describes the Grid connected solar photovoltaique system using DC DC boost converter and the DC AC inverter VSC to supplies electric power to the utility grid. The PV cell model is easy, accurate, and takes external temperature and solar radiation into consideration. The paper presents detailed transient models of the grid connected PV Battery hybrid generation system, and all these models are simulated by using MATLAB Simulink. PV array is firstly connected to the common dc bus by a boost converter, where the battery is also connected by a bi directional DC DC converter, and then integrated into the ac utility grid by a common DC AC inverter. Maximum power point tracking helps PV array to generate the maximum power to the grid, and the battery energy storage can be charged and discharge to balance the power between PV generation and utility grid. Ather Javed | Ameen Uddin Ahmad "Modeling and Simulation of Grid Connected PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd43845.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/43845/modeling-and-simulation-of-grid-connected-pv-system/ather-javed
A Bibliometric Analysis of Different Maximum Power Point Tracking Methods for...ijtsrd
The most influential and abundant sources of renewable energy in India is that the solar power. The character of position changing of sun is that the prime obstacle of the appliance of solar power. Due to that, the atmospheric temperature and irradiance intensity are altering through the day. This leads the way towards the variations within the extent of power production. Within the direction of maximization of the facility throughout different times of the day, a way called Maximum point Tracking MPPT is employed. The aim of this study is to retrieve the energy from solar by developing an appropriate Maximum Power Pont Tracking technique to style a charge controller. Swati Hadke | Ravi Mishra | Ashutosh Werulkar "A Bibliometric Analysis of Different Maximum Power Point Tracking Methods for Photovoltaic Systems" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd42576.pdf Paper URL: https://www.ijtsrd.comengineering/electronics-and-communication-engineering/42576/a-bibliometric-analysis-of-different-maximum-power-point-tracking-methods-for-photovoltaic-systems/swati-hadke
Power Generation Using Piezoelectric TransducerIJERA Editor
The most basic need of today’s world is energy which is non-renewable source of energy available on earth. The
need is increasing day by day, to overcome this there is requirement of energy harvesting. This paper attempts
to show how man has been utilizing and optimizing kinetic energy. Current work also illustrates the working
principle of piezoelectric crystal and various sources of vibration for the crystal. “The idea of energy harvesting
is applicable to sensors as well as transducers that are placed and operated on some entities for a long time to
replace the sensor module batteries. Such sensors are commonly called self-powered sensors.” Embarked
piezoelectric transducer, which is an electromechanical converter, undergoes mechanical vibrations therefore
produce electricity. This power source has many applications as in agriculture, home application and street
lighting and as energy source for sensors in remote locations
Maximizing Output Power of a Solar Panel via Combination of Sun Tracking and ...ijtsrd
Energy is the basic needs for human comforts and day to day activities. Energy is the key factor for social and economic developments in today scenario. Now a day’s global warming is the main problem of developing counties, due to the nonstop combustion of fossil fuels all over the world, creating environmental hazards and reducing conventional energy sources. This scenario is contributing to the need to search for an new renewable source of energy, which is clean and available in excess. Due to the huge impetus in the government policies on the development of solar energy, it is acting as a main alternative renewable energy source. The solar energy is popular due to easy maintenance, cleanliness, sustainability, and zero noise characteristics. Therefore, Photo Voltaic module supplying loads with and without Maximum Power Point Technique MPPT is applied in the current studies to find the best results. Since the Photovoltaic array output is known to be affected by radiation of sun and temperature, which makes is compulsory to find out an effective method to draw out maximum power from Photo Voltaic cell modules. In my work, Perturb and Observe PandO algorithm is selected because of its easy implementation Solar energy is the clean and eternal source of energy till the end of the world. In this paper main focus is how to improve the efficiency of solar based power generation .Solar energy is variable depends upon the time and the atmospheric condition and hence output of the solar cell is directly proportional to the insulation level and inversely proportional to cell temperature and also the cell never operates at maximum power. Bhoopendra Kumar Rajput | Ameen Uddin Ahmad "Maximizing Output Power of a Solar Panel via Combination of Sun Tracking and Maximum Power Point Tracking" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33406.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/33406/maximizing-output-power-of-a-solar-panel-via-combination-of-sun-tracking-and-maximum-power-point-tracking/bhoopendra-kumar-rajput
Modeling and Simulation for a 3.5 Kw Grid Connected Photo Voltaic Power Systemijtsrd
This paper presents the design of small scale three phase grid connected system for rural location. The proposed hybrid system includes a 3.5 kW PV panel with a DC DC boost converter with controller for Maximum Power Point Tracking MPPT, DC AC inverter with decoupled power controller supplying the load and connected to the grid. The MPPT controller is used to harvest maximum power from the solar panel and decoupled power controller is used for tracking the real and reactive powers and also improves the system stability. MATLAB simulation of the proposed model is carried out to show the effectiveness of grid connected photovoltaic systems. Sheikh Shaheen | Mohd Ilyas "Modeling and Simulation for a 3.5 Kw Grid-Connected Photo-Voltaic Power System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33049.pdf Paper Url :https://www.ijtsrd.com/engineering/electrical-engineering/33049/modeling-and-simulation-for-a-35-kw-gridconnected-photovoltaic-power-system/sheikh-shaheen
Analysis, Modeling and Implementation of Incremental Conductance Maximum Powe...ijtsrd
Maximum power point tracking must be used in PV systems to get the most of solar energy. A solar cells property is non linear. The intensity of solar radiation falling on the earths surface is affected by a variety of elements including clouds, water vapour, pollution, absorption, scattering, and climate conditions. A PV system without MPPT seldom generates maximum power, which also affects the Maximum Power Point of the PV system with regard to a certain environmental situation, resulting in low power. In order to monitor PV systems MPP Incremental conductance IC method gives greater steady state accuracy with better and efficient output compared to non MPPT system. Several simulation results are shown here. Reetu Kalbhor | Priyanka Kamdar | Dr. Geetam Richhariya | Neeti Dugaya "Analysis, Modeling and Implementation of Incremental Conductance Maximum Power Point Tracking" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-7 , December 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52544.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/52544/analysis-modeling-and-implementation-of-incremental-conductance-maximum-power-point-tracking/reetu-kalbhor
Experimental Analysis of Factors Affecting the Power Output of the PV Module IJECEIAES
Energy is the driving force in all the sectors as it acts like an index of standard of living or prosperity of the people of the country. However heavy dependence on fossil fuels leads to global warming, hence there is a need for the use of clean, sustainable, and eco friendly form of energy. Among the various types of non-conventional energy solar energy is the fundamental as it is abundant, pollution free and universally available.Even though the main input to the PV system is the solar radiation still there are other factors which affects the efficiency of the pv module. In this paper real time experiment has been conducted to analyze the effect of various factors like irradiance, temperature, and angle of tilt, soiling, shading on the power output of the pv module. Temperature is a negative factor which reduces the efficiency of the module and can be reduced by various cooling arrangements. Presence of dust particles and shading obstructs the incident solar radiations entering the panel and the effect is seen in the iv and pv curve .For better performance solar tracking at maximum power point is suggested to improve the power output of the pv module.
Power Quality Improvement in Grid Connected PV Systemijtsrd
The general trends in the past decade of increasing solar cell efficiency, decreasing PV system costs, increasing government incentive programs, and several other factors have all combined synergistically to reduce the barriers of entry for PV systems to enter the market and expand their contribution to the global energy portfolio. The shortcomings of current inverter functions which link PV systems to the utility network are becoming transparent as PV penetration levels continue to increase. In this paper an analysis of solar system connected with the grid has been done. The system is subjected with two types of perturbations, i.e. variable load and the variable irradiance level which changes the output of the solar system. The design, modeling, and analysis of a grid-tied PV system are performed in the MATLAB software simulation environment. Solar cell works on the principle of photo voltaic effect, which has nonlinear voltage and current characteristics. These characteristics are improved with the help of maximum power point tracking (MPPT) controller. MPPT controller helps to feed the inverter with maximum power from the solar system. Results indicate that in the presence of grid disturbances the inverter can react dynamically to help restore the power system back to its normal state. A harmonic analysis was also performed indicating the inverter under study met the applicable power quality standards for distributed energy resources Anjali | Gourav Sharma"Power Quality Improvement in Grid Connected PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-4 , June 2017, URL: http://www.ijtsrd.com/papers/ijtsrd2196.pdf http://www.ijtsrd.com/engineering/electrical-engineering/2196/power-quality-improvement-in-grid-connected-pv-system/anjali
‘Six Sigma Technique’ A Journey Through its Implementationijtsrd
The manufacturing industries all over the world are facing tough challenges for growth, development and sustainability in today’s competitive environment. They have to achieve apex position by adapting with the global competitive environment by delivering goods and services at low cost, prime quality and better price to increase wealth and consumer satisfaction. Cost Management ensures profit, growth and sustainability of the business with implementation of Continuous Improvement Technique like Six Sigma. This leads to optimize Business performance. The method drives for customer satisfaction, low variation, reduction in waste and cycle time resulting into a competitive advantage over other industries which did not implement it. The main objective of this paper ‘Six Sigma Technique A Journey Through Its Implementation’ is to conceptualize the effectiveness of Six Sigma Technique through the journey of its implementation. Aditi Sunilkumar Ghosalkar "‘Six Sigma Technique’: A Journey Through its Implementation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64546.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64546/‘six-sigma-technique’-a-journey-through-its-implementation/aditi-sunilkumar-ghosalkar
Edge Computing in Space Enhancing Data Processing and Communication for Space...ijtsrd
Edge computing, a paradigm that involves processing data closer to its source, has gained significant attention for its potential to revolutionize data processing and communication in space missions. With the increasing complexity and data volume generated by modern space missions, traditional centralized computing approaches face challenges related to latency, bandwidth, and security. Edge computing in space, involving on board processing and analysis of data, offers promising solutions to these challenges. This paper explores the concept of edge computing in space, its benefits, applications, and future prospects in enhancing space missions. Manish Verma "Edge Computing in Space: Enhancing Data Processing and Communication for Space Missions" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64541.pdf Paper Url: https://www.ijtsrd.com/computer-science/artificial-intelligence/64541/edge-computing-in-space-enhancing-data-processing-and-communication-for-space-missions/manish-verma
Dynamics of Communal Politics in 21st Century India Challenges and Prospectsijtsrd
Communal politics in India has evolved through centuries, weaving a complex tapestry shaped by historical legacies, colonial influences, and contemporary socio political transformations. This research comprehensively examines the dynamics of communal politics in 21st century India, emphasizing its historical roots, socio political dynamics, economic implications, challenges, and prospects for mitigation. The historical perspective unravels the intricate interplay of religious identities and power dynamics from ancient civilizations to the impact of colonial rule, providing insights into the evolution of communalism. The socio political dynamics section delves into the contemporary manifestations, exploring the roles of identity politics, socio economic disparities, and globalization. The economic implications section highlights how communal politics intersects with economic issues, perpetuating disparities and influencing resource allocation. Challenges posed by communal politics are scrutinized, revealing multifaceted issues ranging from social fragmentation to threats against democratic values. The prospects for mitigation present a multifaceted approach, incorporating policy interventions, community engagement, and educational initiatives. The paper conducts a comparative analysis with international examples, identifying common patterns such as identity politics and economic disparities. It also examines unique challenges, emphasizing Indias diverse religious landscape, historical legacy, and secular framework. Lessons for effective strategies are drawn from international experiences, offering insights into inclusive policies, interfaith dialogue, media regulation, and global cooperation. By scrutinizing historical epochs, contemporary dynamics, economic implications, and international comparisons, this research provides a comprehensive understanding of communal politics in India. The proposed strategies for mitigation underscore the importance of a holistic approach to foster social harmony, inclusivity, and democratic values. Rose Hossain "Dynamics of Communal Politics in 21st Century India: Challenges and Prospects" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64528.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/history/64528/dynamics-of-communal-politics-in-21st-century-india-challenges-and-prospects/rose-hossain
Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in...ijtsrd
Background and Objective Telehealth has become a well known tool for the delivery of health care in Saudi Arabia, and the perspective and knowledge of healthcare providers are influential in the implementation, adoption and advancement of the method. This systematic review was conducted to examine the current literature base regarding telehealth and the related healthcare professional perspective and knowledge in the Kingdom of Saudi Arabia. Materials and Methods This systematic review was conducted by searching 7 databases including, MEDLINE, CINHAL, Web of Science, Scopus, PubMed, PsycINFO, and ProQuest Central. Studies on healthcare practitioners telehealth knowledge and perspectives published in English in Saudi Arabia from 2000 to 2023 were included. Boland directed this comprehensive review. The researchers examined each connected study using the AXIS tool, which evaluates cross sectional systematic reviews. Narrative synthesis was used to summarise and convey the data. Results Out of 1840 search results, 10 studies were included. Positive outlook and limited knowledge among providers were seen across trials. Healthcare professionals like telehealth for its ability to improve quality, access, and delivery, save time and money, and be successful. Age, gender, occupation, and work experience also affect health workers knowledge. In Saudi Arabia, healthcare professionals face inadequate expert assistance, patient privacy, internet connection concerns, lack of training courses, lack of telehealth understanding, and high costs while performing telemedicine. Conclusions Healthcare practitioners telehealth perceptions and knowledge were examined in this systematic study. Its collection of concerned experts different personal attitudes and expertise would help enhance telehealths implementation in Saudi Arabia, develop its healthcare delivery alternative, and eliminate frequent problems. Badriah Mousa I Mulayhi | Dr. Jomin George | Judy Jenkins "Assess Perspective and Knowledge of Healthcare Providers Towards Elehealth in Saudi Arabia: A Systematic Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64535.pdf Paper Url: https://www.ijtsrd.com/medicine/other/64535/assess-perspective-and-knowledge-of-healthcare-providers-towards-elehealth-in-saudi-arabia-a-systematic-review/badriah-mousa-i-mulayhi
The Impact of Digital Media on the Decentralization of Power and the Erosion ...ijtsrd
The impact of digital media on the distribution of power and the weakening of traditional gatekeepers has gained considerable attention in recent years. The adoption of digital technologies and the internet has resulted in declining influence and power for traditional gatekeepers such as publishing houses and news organizations. Simultaneously, digital media has facilitated the emergence of new voices and players in the media industry. Digital medias impact on power decentralization and gatekeeper erosion is visible in several ways. One significant aspect is the democratization of information, which enables anyone with an internet connection to publish and share content globally, leading to citizen journalism and bypassing traditional gatekeepers. Another aspect is the disruption of conventional media industry business models, as traditional organizations struggle to adjust to the decrease in advertising revenue and the rise of digital platforms. Alternative business models, such as subscription models and crowdfunding, have become more prevalent, leading to the emergence of new players. Overall, the impact of digital media on the distribution of power and the weakening of traditional gatekeepers has brought about significant changes in the media landscape and the way information is shared. Further research is required to fully comprehend the implications of these changes and their impact on society. Dr. Kusum Lata "The Impact of Digital Media on the Decentralization of Power and the Erosion of Traditional Gatekeepers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64544.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64544/the-impact-of-digital-media-on-the-decentralization-of-power-and-the-erosion-of-traditional-gatekeepers/dr-kusum-lata
Online Voices, Offline Impact Ambedkars Ideals and Socio Political Inclusion ...ijtsrd
This research investigates the nexus between online discussions on Dr. B.R. Ambedkars ideals and their impact on social inclusion among college students in Gurugram, Haryana. Surveying 240 students from 12 government colleges, findings indicate that 65 actively engage in online discussions, with 80 demonstrating moderate to high awareness of Ambedkars ideals. Statistically significant correlations reveal that higher online engagement correlates with increased awareness p 0.05 and perceived social inclusion. Variations across colleges and a notable effect of college type on perceived social inclusion highlight the influence of contextual factors. Furthermore, the intersectional analysis underscores nuanced differences based on gender, caste, and socio economic status. Dr. Kusum Lata "Online Voices, Offline Impact: Ambedkar's Ideals and Socio-Political Inclusion - A Study of Gurugram District" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64543.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/political-science/64543/online-voices-offline-impact-ambedkars-ideals-and-sociopolitical-inclusion--a-study-of-gurugram-district/dr-kusum-lata
Problems and Challenges of Agro Entreprenurship A Studyijtsrd
Noting calls for contextualizing Agro entrepreneurs problems and challenges of the agro entrepreneurs and for greater attention to the Role of entrepreneurs in agro entrepreneurship research, we conduct a systematic literature review of extent research in agriculture entrepreneurship to overcome the study objectives of complications of agro entrepreneurs through various factors, Development of agriculture products is a key factor for the overall economic growth of agro entrepreneurs Agro Entrepreneurs produces firsthand large scale employment, utilizes the labor and natural resources, This research outlines the problems of Weather and Soil Erosions, Market price fluctuation, stimulates labor cost problems, reduces concentration of Price volatility, Dependency on Intermediaries, induces Limited Bargaining Power, and Storage and Transportation Costs. This paper mainly devoted to highlight Problems and challenges faced for the sustainable of Agro Entrepreneurs in India. Vinay Prasad B "Problems and Challenges of Agro Entreprenurship - A Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64540.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64540/problems-and-challenges-of-agro-entreprenurship--a-study/vinay-prasad-b
Comparative Analysis of Total Corporate Disclosure of Selected IT Companies o...ijtsrd
Disclosure is a process through which a business enterprise communicates with external parties. A corporate disclosure is communication of financial and non financial information of the activities of a business enterprise to the interested entities. Corporate disclosure is done through publishing annual reports. So corporate disclosure through annual reports plays a vital role in the life of all the companies and provides valuable information to investors. The basic objectives of corporate disclosure is to give a true and fair view of companies to the parties related either directly or indirectly like owner, government, creditors, shareholders etc. in the companies act, provisions have been made about mandatory and voluntary disclosure. The IT sector in India is rapidly growing, the trend to invest in the IT sector is rising and employment opportunities in IT sectors are also increasing. Therefore the IT sector is expected to have fair, full and adequate disclosure of all information. Unfair and incomplete disclosure may adversely affect the entire economy. A research study on disclosure practices of IT companies could play an important role in this regard. Hence, the present research study has been done to study and review comparative analysis of total corporate disclosure of selected IT companies of India and to put forward overall findings and suggestions with a view to increase disclosure score of these companies. The researcher hopes that the present research study will be helpful to all selected Companies for improving level of corporate disclosure through annual reports as well as the government, creditors, investors, all business organizations and upcoming researcher for comparative analyses of level of corporate disclosure with special reference to selected IT companies. Dr. Vaibhavi D. Thaker "Comparative Analysis of Total Corporate Disclosure of Selected IT Companies of India" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64539.pdf Paper Url: https://www.ijtsrd.com/other-scientific-research-area/other/64539/comparative-analysis-of-total-corporate-disclosure-of-selected-it-companies-of-india/dr-vaibhavi-d-thaker
The Impact of Educational Background and Professional Training on Human Right...ijtsrd
This study investigated the impact of educational background and professional training on human rights awareness among secondary school teachers in the Marathwada region of Maharashtra, India. The key findings reveal that higher levels of education, particularly a master’s degree, and fields of study related to education, humanities, or social sciences are associated with greater human rights awareness among teachers. Additionally, both pre service teacher training and in service professional development programs focused on human rights education significantly enhance teacher’s knowledge, skills, and competencies in promoting human rights principles in their classrooms. Baig Ameer Bee Mirza Abdul Aziz | Dr. Syed Azaz Ali Amjad Ali "The Impact of Educational Background and Professional Training on Human Rights Awareness among Secondary School Teachers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64529.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64529/the-impact-of-educational-background-and-professional-training-on-human-rights-awareness-among-secondary-school-teachers/baig-ameer-bee-mirza-abdul-aziz
A Study on the Effective Teaching Learning Process in English Curriculum at t...ijtsrd
“One Language sets you in a corridor for life. Two languages open every door along the way” Frank Smith English as a foreign language or as a second language has been ruling in India since the period of Lord Macaulay. But the question is how much we teach or learn English properly in our culture. Is there any scope to use English as a language rather than a subject How much we learn or teach English without any interference of mother language specially in the classroom teaching learning scenario in West Bengal By considering all these issues the researcher has attempted in this article to focus on the effective teaching learning process comparing to other traditional strategies in the field of English curriculum at the secondary level to investigate whether they fulfill the present teaching learning requirements or not by examining the validity of the present curriculum of English. The purpose of this study is to focus on the effectiveness of the systematic, scientific, sequential and logical transaction of the course between the teachers and the learners in the perspective of the 5Es programme that is engage, explore, explain, extend and evaluate. Sanchali Mondal | Santinath Sarkar "A Study on the Effective Teaching Learning Process in English Curriculum at the Secondary Level of West Bengal" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd62412.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/62412/a-study-on-the-effective-teaching-learning-process-in-english-curriculum-at-the-secondary-level-of-west-bengal/sanchali-mondal
The Role of Mentoring and Its Influence on the Effectiveness of the Teaching ...ijtsrd
This paper reports on a study which was conducted to investigate the role of mentoring and its influence on the effectiveness of the teaching of Physics in secondary schools in the South West Region of Cameroon. The study adopted the convergent parallel mixed methods design, focusing on respondents in secondary schools in the South West Region of Cameroon. Both quantitative and qualitative data were collected, analysed separately, and the results were compared to see if the findings confirm or disconfirm each other. The quantitative analysis found that majority of the respondents 72 of Physics teachers affirmed that they had more experienced colleagues as mentors to help build their confidence, improve their teaching, and help them improve their effectiveness and efficiency in guiding learners’ achievements. Only 28 of the respondents disagreed with these statements. With majority respondents 72 agreeing with the statements, it implies that in most secondary schools, experienced Physics teachers act as mentors to build teachers’ confidence in teaching and improving students’ learning. The interview qualitative data analysis summarized how secondary school Principals use meetings with mentors and mentees to promote mentorship in the school milieu. This has helped strengthen teachers’ classroom practices in secondary schools in the South West Region of Cameroon. With the results confirming each other, the study recommends that mentoring should focus on helping teachers employ social interactions and instructional practices feedback and clarity in teaching that have direct measurable impact on students’ learning achievements. Andrew Ngeim Sumba | Frederick Ebot Ashu | Peter Agborbechem Tambi "The Role of Mentoring and Its Influence on the Effectiveness of the Teaching of Physics in Secondary Schools in the South West Region of Cameroon" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64524.pdf Paper Url: https://www.ijtsrd.com/management/management-development/64524/the-role-of-mentoring-and-its-influence-on-the-effectiveness-of-the-teaching-of-physics-in-secondary-schools-in-the-south-west-region-of-cameroon/andrew-ngeim-sumba
Design Simulation and Hardware Construction of an Arduino Microcontroller Bas...ijtsrd
This study primarily focuses on the design of a high side buck converter using an Arduino microcontroller. The converter is specifically intended for use in DC DC applications, particularly in standalone solar PV systems where the PV output voltage exceeds the load or battery voltage. To evaluate the performance of the converter, simulation experiments are conducted using Proteus Software. These simulations provide insights into the input and output voltages, currents, powers, and efficiency under different state of charge SoC conditions of a 12V,70Ah rechargeable lead acid battery. Additionally, the hardware design of the converter is implemented, and practical data is collected through operation, monitoring, and recording. By comparing the simulation results with the practical results, the efficiency and performance of the designed converter are assessed. The findings indicate that while the buck converter is suitable for practical use in standalone PV systems, its efficiency is compromised due to a lower output current. Chan Myae Aung | Dr. Ei Mon "Design Simulation and Hardware Construction of an Arduino-Microcontroller Based DC-DC High-Side Buck Converter for Standalone PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64518.pdf Paper Url: https://www.ijtsrd.com/engineering/mechanical-engineering/64518/design-simulation-and-hardware-construction-of-an-arduinomicrocontroller-based-dcdc-highside-buck-converter-for-standalone-pv-system/chan-myae-aung
Sustainable Energy by Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadikuijtsrd
Energy becomes sustainable if it meets the needs of the present without compromising the ability of future generations to meet their own needs. Some of the definitions of sustainable energy include the considerations of environmental aspects such as greenhouse gas emissions, social, and economic aspects such as energy poverty. Generally far more sustainable than fossil fuel are renewable energy sources such as wind, hydroelectric power, solar, and geothermal energy sources. Worthy of note is that some renewable energy projects, like the clearing of forests to produce biofuels, can cause severe environmental damage. The sustainability of nuclear power which is a low carbon source is highly debated because of concerns about radioactive waste, nuclear proliferation, and accidents. The switching from coal to natural gas has environmental benefits, including a lower climate impact, but could lead to delay in switching to more sustainable options. “Carbon capture and storage” can be built into power plants to remove the carbon dioxide CO2 emissions, but this technology is expensive and has rarely been implemented. Leading non renewable energy sources around the world is fossil fuels, coal, petroleum, and natural gas. Nuclear energy is usually considered another non renewable energy source, although nuclear energy itself is a renewable energy source, but the material used in nuclear power plants is not. The paper addresses the issue of sustainable energy, its attendant benefits to the future generation, and humanity in general. Paul A. Adekunte | Matthew N. O. Sadiku | Janet O. Sadiku "Sustainable Energy" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64534.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/64534/sustainable-energy/paul-a-adekunte
Concepts for Sudan Survey Act Implementations Executive Regulations and Stand...ijtsrd
This paper aims to outline the executive regulations, survey standards, and specifications required for the implementation of the Sudan Survey Act, and for regulating and organizing all surveying work activities in Sudan. The act has been discussed for more than 5 years. The Land Survey Act was initiated by the Sudan Survey Authority and all official legislations were headed by the Sudan Ministry of Justice till it was issued in 2022. The paper presents conceptual guidelines to be used for the Survey Act implementation and to regulate the survey work practice, standardizing the field surveys, processing, quality control, procedures, and the processes related to survey work carried out by the stakeholders and relevant authorities in Sudan. The conceptual guidelines are meant to improve the quality and harmonization of geospatial data and to aid decision making processes as well as geospatial information systems. The established comprehensive executive regulations will govern and regulate the implementation of the Sudan Survey Geomatics Act in all surveying and mapping practices undertaken by the Sudan Survey Authority SSA and state local survey departments for public or private sector organizations. The targeted standards and specifications include the reference frame, projection, coordinate systems, and the guidelines and specifications that must be followed in the field of survey work, processes, and mapping products. In the last few decades, there has been a growing awareness of the importance of geomatics activities and measurements on the Earths surface in space and time, together with observing and mapping the changes. In such cases, data must be captured promptly, standardized, and obtained with more accuracy and specified in much detail. The paper will also highlight the current situation in Sudan, the degree to which survey standards are used, the problems encountered, and the errors that arise from not using the standards and survey specifications. Kamal A. A. Sami "Concepts for Sudan Survey Act Implementations - Executive Regulations and Standards" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63484.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63484/concepts-for-sudan-survey-act-implementations--executive-regulations-and-standards/kamal-a-a-sami
Towards the Implementation of the Sudan Interpolated Geoid Model Khartoum Sta...ijtsrd
The discussions between ellipsoid and geoid have invoked many researchers during the recent decades, especially during the GNSS technology era, which had witnessed a great deal of development but still geoid undulation requires more investigations. To figure out a solution for Sudans local geoid, this research has tried to intake the possibility of determining the geoid model by following two approaches, gravimetric and geometrical geoid model determination, by making use of GNSS leveling benchmarks at Khartoum state. The Benchmarks are well distributed in the study area, in which, the horizontal coordinates and the height above the ellipsoid have been observed by GNSS while orthometric heights were carried out using precise leveling. The Global Geopotential Model GGM represented in EGM2008 has been exploited to figure out the geoid undulation at the benchmarks in the study area. This is followed by a fitting process, that has been done to suit the geoid undulation data which has been computed using GNSS leveling data and geoid undulation inspired by the EGM2008. Two geoid surfaces were created after the fitting process to ensure that they are identical and both of them could be counted for getting the same geoid undulation with an acceptable accuracy. In this respect, statistical operation played an important role in ensuring the consistency and integrity of the model by applying cross validation techniques splitting the data into training and testing datasets for building the geoid model and testing its eligibility. The geometrical solution for geoid undulation computation has been utilized by applying straightforward equations that facilitate the calculation of the geoid undulation directly through applying statistical techniques for the GNSS leveling data of the study area to get the common equation parameters values that could be utilized to calculate geoid undulation of any position in the study area within the claimed accuracy. Both systems were checked and proved eligible to be used within the study area with acceptable accuracy which may contribute to solving the geoid undulation problem in the Khartoum area, and be further generalized to determine the geoid model over the entire country, and this could be considered in the future, for regional and continental geoid model. Ahmed M. A. Mohammed. | Kamal A. A. Sami "Towards the Implementation of the Sudan Interpolated Geoid Model (Khartoum State Case Study)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63483.pdf Paper Url: https://www.ijtsrd.com/engineering/civil-engineering/63483/towards-the-implementation-of-the-sudan-interpolated-geoid-model-khartoum-state-case-study/ahmed-m-a-mohammed
Activating Geospatial Information for Sudans Sustainable Investment Mapijtsrd
Sudan is witnessing an acceleration in the processes of development and transformation in the performance of government institutions to raise the productivity and investment efficiency of the government sector. The development plans and investment opportunities have focused on achieving national goals in various sectors. This paper aims to illuminate the path to the future and provide geospatial data and information to develop the investment climate and environment for all sized businesses, and to bridge the development gap between the Sudan states. The Sudan Survey Authority SSA is the main advisor to the Sudan Government in conducting surveying, mappings, designing, and developing systems related to geospatial data and information. In recent years, SSA made a strategic partnership with the Ministry of Investment to activate Geospatial Information for Sudans Sustainable Investment and in particular, for the preparation and implementation of the Sudan investment map, based on the directives and objectives of the Ministry of Investment MI in Sudan. This paper comes within the framework of activating the efforts of the Ministry of Investment to develop technical investment services by applying techniques adopted by the Ministry and its strategic partners for advancing investment processes in the country. Kamal A. A. Sami "Activating Geospatial Information for Sudan's Sustainable Investment Map" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63482.pdf Paper Url: https://www.ijtsrd.com/engineering/information-technology/63482/activating-geospatial-information-for-sudans-sustainable-investment-map/kamal-a-a-sami
Educational Unity Embracing Diversity for a Stronger Societyijtsrd
In a rapidly changing global landscape, the importance of education as a unifying force cannot be overstated. This paper explores the crucial role of educational unity in fostering a stronger and more inclusive society through the embrace of diversity. By examining the benefits of diverse learning environments, the paper aims to highlight the positive impact on societal strength. The discussion encompasses various dimensions, from curriculum design to classroom dynamics, and emphasizes the need for educational institutions to become catalysts for unity in diversity. It highlights the need for a paradigm shift in educational policies, curricula, and pedagogical approaches to ensure that they are reflective of the diverse fabric of society. This paper also addresses the challenges associated with implementing inclusive educational practices and offers practical strategies for overcoming barriers. It advocates for collaborative efforts between educational institutions, policymakers, and communities to create a supportive ecosystem that promotes diversity and unity. Mr. Amit Adhikari | Madhumita Teli | Gopal Adhikari "Educational Unity: Embracing Diversity for a Stronger Society" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64525.pdf Paper Url: https://www.ijtsrd.com/humanities-and-the-arts/education/64525/educational-unity-embracing-diversity-for-a-stronger-society/mr-amit-adhikari
Integration of Indian Indigenous Knowledge System in Management Prospects and...ijtsrd
The diversity of indigenous knowledge systems in India is vast and can vary significantly between different communities and regions. Preserving and respecting these knowledge systems is crucial for maintaining cultural heritage, promoting sustainable practices, and fostering cross cultural understanding. In this paper, an overview of the prospects and challenges associated with incorporating Indian indigenous knowledge into management is explored. It is found that IIKS helps in management in many areas like sustainable development, tourism, food security, natural resource management, cultural preservation and innovation, etc. However, IIKS integration with management faces some challenges in the form of a lack of documentation, cultural sensitivity, language barriers legal framework, etc. Savita Lathwal "Integration of Indian Indigenous Knowledge System in Management: Prospects and Challenges" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63500.pdf Paper Url: https://www.ijtsrd.com/management/accounting-and-finance/63500/integration-of-indian-indigenous-knowledge-system-in-management-prospects-and-challenges/savita-lathwal
DeepMask Transforming Face Mask Identification for Better Pandemic Control in...ijtsrd
The COVID 19 pandemic has highlighted the crucial need of preventive measures, with widespread use of face masks being a key method for slowing the viruss spread. This research investigates face mask identification using deep learning as a technological solution to be reducing the risk of coronavirus transmission. The proposed method uses state of the art convolutional neural networks CNNs and transfer learning to automatically recognize persons who are not wearing masks in a variety of circumstances. We discuss how this strategy improves public health and safety by providing an efficient manner of enforcing mask wearing standards. The report also discusses the obstacles, ethical concerns, and prospective applications of face mask detection systems in the ongoing fight against the pandemic. Dilip Kumar Sharma | Aaditya Yadav "DeepMask: Transforming Face Mask Identification for Better Pandemic Control in the COVID-19 Era" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd64522.pdf Paper Url: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/64522/deepmask-transforming-face-mask-identification-for-better-pandemic-control-in-the-covid19-era/dilip-kumar-sharma
Streamlining Data Collection eCRF Design and Machine Learningijtsrd
Efficient and accurate data collection is paramount in clinical trials, and the design of Electronic Case Report Forms eCRFs plays a pivotal role in streamlining this process. This paper explores the integration of machine learning techniques in the design and implementation of eCRFs to enhance data collection efficiency. We delve into the synergies between eCRF design principles and machine learning algorithms, aiming to optimize data quality, reduce errors, and expedite the overall data collection process. The application of machine learning in eCRF design brings forth innovative approaches to data validation, anomaly detection, and real time adaptability. This paper discusses the benefits, challenges, and future prospects of leveraging machine learning in eCRF design for streamlined and advanced data collection in clinical trials. Dhanalakshmi D | Vijaya Lakshmi Kannareddy "Streamlining Data Collection: eCRF Design and Machine Learning" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-8 | Issue-1 , February 2024, URL: https://www.ijtsrd.com/papers/ijtsrd63515.pdf Paper Url: https://www.ijtsrd.com/biological-science/biotechnology/63515/streamlining-data-collection-ecrf-design-and-machine-learning/dhanalakshmi-d
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Introduction to AI for Nonprofits with Tapp NetworkTechSoup
Dive into the world of AI! Experts Jon Hill and Tareq Monaur will guide you through AI's role in enhancing nonprofit websites and basic marketing strategies, making it easy to understand and apply.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
2. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD49926 | Volume – 6 | Issue – 3 | Mar-Apr 2022 Page 2152
or OFF state. SEPIC converter was chosen because it
can convert the input voltage to either a higher or
lower output voltage.
[5] Explained the make-up of a solar battery charger,
a dc-dc converter connected between a solar panel
and battery was used. The main components of the
solar battery charger are standard photovoltaic cells, a
single ended primary inductance converter (SEPIC)
and a controller. The SEPIC converter is a type of
DC-DC converter that is able to convert unregulated
input voltage into either a higher or lower output
voltage. This allows the solar panel to charge the
battery with a wider range of output voltage, thus
flexibility is increased. Experimental results of the
solar battery charger are evaluated while I used an
inverter and generally the SEPIC converter increases
the efficiency of conversion.
Trishan Esram and Patrick L. Chapman in [6]
presented the "Comparison of Photovoltaic Array
Maximum Power Point Tracking Techniques. The
Proposed system contains the two LDRs as sensors, a
new Design of controller parts and the geared DC
motor as Actuator. This system can successfully track
the current Positions of the sun and can be used for
non-critical and Low power applications. The existing
tracking systems have complicated sensor strategies
so has high cost and maintenance issues. Many
researchers from all over the world have developed
So many solar radiations sensing devices and tracking
Strategies but they contain large number of LDRs
which makes them complicated and very expensive.
So, cost effectiveness and portability are the objective
of this work.
A portable solar power inverter was designed and
constructed by Md. Rabiul Islam et.al [7] making use
of solar plates, an 8051 microcontroller, a solar
tracker, transformer, lead acid battery and an inverter.
The system proved to be a very good one as it is
portable and can be easily carried about, the battery
chosen for this project is a lead acid battery with 6
cells and 35Ah, which is manufactured by mart. The
battery has a battery life of approximately
Over 100,000 operating hours and 450A max
discharge surge current and minimum charge current
of about 1 amp. While lithium-ion battery is used in
carrying out this project which has comparative
advantages over deep cycle batteries. Part of which
includes more operating life and lighter in weight
when compared to lead acid battery.
2. Basic Theory of Solar Cell
Solar cells are made by two types of semiconductor
materials one is N-type semiconductor and other is P-
type semiconductor material for generation of
electricity [8]. When light strikes on semiconductor, it
generates electrons (-) and holes (+) pairs. when
electron and hole pair reaches between two different
type of semiconductor's joint surface then electron
and hole are separated, electron is attached by N-type
semiconductor and hole is attached by P-type
semiconductor after that they are not rejoin due to
joint surface do not allow both way traffic.
Fig 1 P-N junction illustration of PV cell
Now electrons are contained by N-type
semiconductor and holes are contained by P-type
semiconductor, an electro motive force (emf) is
generated in electrodes. When these electrodes are
connected together by a conductor electrons run
toward P-type semiconductor and holes run toward
N-type semiconductor.
Fig. 2 Flow of current
2.1. Solar Cell Connections
Solar cell connection is just like battery connection.
When positive terminal of one solar cell is connected
to negative terminal of another solar cell then they
form series connection. In series connection current is
same for all cells and voltage is added by each cell
shown in figure 3.
And when all positive terminals of solar cells
connected to one terminal and all negative positive
terminals of solar cells connected to another one
terminal then forms parallel connection. As shown in
figure 4 here current is added and voltage is same for
all cells.
3. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD49926 | Volume – 6 | Issue – 3 | Mar-Apr 2022 Page 2153
Fig 3 Series connection of solar cell
Fig. 4 Parallel connection of solar cell
2.2 Solar Cell, Solar Module or Panel and Solar
PV Array
In solar power generation system a number of solar
cells is required to produce high power so they are
connected in form of Solar Module or Solar panel and
for a higher capability form[9]. An Array as shown in
figure 5 is needed.
Fig.5 Formation of solar Module and solar PV
Array
3. METHODOLOGY
Out of all the methods which include waterfall,
prototype, iterative enhancement, evolutionary
development, spiral and RAD (Rapid Application
Development), the waterfall method was chosen as it
met most of our necessary requirements.
As per the model implemented, it was the waterfall
model that have five phases, namely;
1. Requirement analysis and specifications
2. System Design
3. Implementation and subsystem testing
4. Integration and system testing
5. Operational and maintenance phase
4. SYSTEM DESIGN ANALYSIS
The design of the project is in two subsystems
namely:
Portable solar generator subsystem
Smart Solar panel subsystem The block diagram
in fig.6 shows the various subsystems that make
up the system design, fig.7 shows their
interconnections
Fig.6 Block diagram of the components of the
system.
Fig 7 Schematic diagram our Solar Power
System
Portable Solar Generator subsystem has the
following sections
Battery bank. Two lead-acid cells were used, each
has a rating of 12V/9Ah. The lead-acid batteries were
connected in parallel to produce an output of 12V,
18A
Battery calculations;
watts
in
Load
Connected
watt
in
Power
Battery
Duration
runtime
Battery =
/ (1)
But,
batteries
of
Number
Voltage
Battery
Hour
watt
in
Power
Battery ×
=
/
Let battery runtime/duration = T C = Battery
capacity in AH V = Battery voltage in volts N
= Number of batteries in series/parallel as the case
may be.
Pl = Connected load in watts
PI
N
V
C
T
×
×
=
∴ (2)
4. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD49926 | Volume – 6 | Issue – 3 | Mar-Apr 2022 Page 2154
For V = 12V, Pl = 200 watts, N = 2, C = 18Ah
hrs
T 16
.
2
200
2
12
18 ×
×
=
∴
Solar Charge Controller Unit
The following calculations were made in selecting
solar charge controller. The energy of the battery
bank is calculated. Here we made use of two lead acid
batteries of parameters 12V,18A
Battery
the
of
Energy
= ( )Ah
current
voltage×
2 2(12 × 9) = 216Ah
( ) Ah
216
9
12
2 =
×
⇒
Since the charging current should be 10% of the Ah
rating of battery.
Therefore,
battery
Ah
for
Current
ing
Charg
Ah
Ah 6
.
21
100
10
216 =
×
=
Considering tolerance of 20%, we may take (3.0 –
5.0) Amperes for effective battery charging purpose
as the current determines the charging duration (i.e
the amount of time it takes to fully charge). Suppose
we took 4.4 Amp for charging purpose, then,
Charging time for Ah battery
hours
9
.
4
4
.
4
6
.
21
=
=
But this was an ideal case…
Practically, it has been noted that 40% of
losses occurs in case of battery charging.
Then 64
..
8
100
40
6
.
21 =
×
=
Ah
2
.
30
64
.
8
6
.
21 =
+
=
∴
Since Charging Time of battery = Ah / Charging
Current
Putting the values;
hrs
9
.
6
4
.
4
2
.
30
=
∴
Therefore, our 216Ah battery would take 6.9 hrs to
fully charge in case of the required 4.4A charging
current.
To choose a suitable charge controller we need the
following information.
The power (watts) of the solar panel
The battery bank voltage
Using ohms law to find the current V
I
P ×
= (3)
Where, P = Power (watts) I = Current (amps)
V = Voltage (volts)
Now using a 120 watts panel and 12 volts battery to
get the current needed
( )
4
V
P
I =
So we need a charge controller of output charging
voltage greater than 10 Amps.
Adjusting the value by 25% to take into account any
special condition that might cause the panel to
produce more or less power than it is normally rated
for
So we have 10 amps increased by 25%
A
5
.
12
100
25
10
10 =
×
+
Having this in mind, we need a solar charge controller
of charging current greater than 12.5 amp. For this
work, we chose a PWM solar charge controller of
charging current, 50A.
The charging subsystem consists of the solar panel
and a PWM solar charge controller which comes with
LCD display that can clearly indicate the status and
data of the battery and PV array. This controller can
only use photovoltaic panel as the charging source. It
has a maximum charging and discharge current of 50
Amps. 12V panels have a varying output of 16V to
20V, so if there is no regulation the battery will
damage from overcharging.[18] PWM controllers
work by slowly reducing the amount of power going
into your battery as it approaches capacity. When
your battery is full, PWM controllers maintain a state
of “trickle”, which means they supply a tiny amount
of power constantly to keep the battery topped up.
The solar charge controller works as an automatic
disconnect of non-critical loads from the battery when
the voltage falls below a defined threshold. The
charge controller stops the charging of the batteries
once these are sufficiently charged. This will prevent
over-charging. It also facilitates a unidirectional flow
of current from the solar panel to the battery, and
blocks the reverse voltage flow. This helps to prevent
batteries from unnecessary discharging and it
increases the battery uptime and blocks the reverse
flow during the night. Also an added features - two
external USB ports which accommodate the direct
charging of other small and medium devices and a dc
jack as an alternative for charging the system when
there is not enough sunlight.
5. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD49926 | Volume – 6 | Issue – 3 | Mar-Apr 2022 Page 2155
Fig 8 Circuit diagram for charge controller
Figure 9 Image of PWM charge Controller
5. IMPLEMENTATTION AND HARDWARE
TESTING
The solar panel designed has six solar cells connected
in parallel as shown in fig. The Maximum power of 1
smart solar cell = 20Watts given a total 120watts.
The solar panel has the following ratings, Pmax = 20
Watts, Vmax = 12V, Ip max = 1.66A, VOC = 14V, Isc =
1.96A. Maximum power of smart solar panel (six
solar cells) = 120 Watts.
Photo of hardware solar panel is shown in fig. This
solar panel consists of six solar cell. A continuity test
was done across each path of the system. A multi-
meter in buzzer mode was connected to the terminals
across the path that needed to be checked. There was
no inhibition to the flow of current hence continuity is
achieved, and a beep sound was heard.
Figure 4.2: Quality test of our smart solar panel
A 200watt converter modifies DC12V into AC 220V
50Hz, and USB output is DC 5V was used.
Rated output power of the product is 200W, which
can be widely used to power all kinds of electrical
equipment such as mobile phone, TV sets, Laptops,
digital cameras, DVD player, PSP, iPad, and other
digital equipment. This 200 watts converter used has
the following features; Input voltage: DC12V (10.5-
14.5V)/DC24V (19-32V), Output voltage:
AC220V/AC110V ±8%, Peak power: 400W,
Continuous power: 200W, Output frequency: 50HZ
or 60HZUSB output: 5V, 2.1A+1A+2.1A+1A
6. RESULT ANALYSIS
Load Analysis
The designed project was tested with the following
load:
Table 2: Load test
S/No Load Wattage
1 Mobile phone 5
2 Laptop 30
3 Electric fan 50
4 Electric bulb 20
5 LED television (42 inches) 120
Inverter system behavior at maximum load (i.e., 200
watt) each of the battery cell is rated 9Ah, 12 volts.
With 2 batteries in parallel
System Voltage = 12 volts.
Ah
Ah
Ah
capacity
System 18
9
9 =
+
=
IV
Energy
Total = (5)
WAh
216
18
12 =
×
=
Working Energy = (80% of total power)
Inverter Efficiency = 80%
Energy
working
Energy
Actual ×
=η
WAh
24
.
38
8
.
172
8
.
0 =
×
=
Since inverter rating = 200 watts.
At max load = 80% of 200watts
watts
160
200
8
.
0 =
×
load
max
on
operation
of
Time
load
max
energy to
actual
of
ratio
=
hrs
864
.
0
160
24
.
138
load
max
on
operation
of
Time =
=
Inverter system behavior at other loads; 150, 100, and
50 were also calculated. Table 3 shows the results.
WAh
Energy
Total 8
.
172
8
.
0
216 =
×
=
×η
6. International Journal of Trend in Scientific Research and Development @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD49926 | Volume – 6 | Issue – 3 | Mar-Apr 2022 Page 2156
Table 3: Load-Time relationship of the battery
duration
Load (W) Time (Hr)
200 0.86
150 1.2
100 1.8
50 3.7
7. CONCLUSION
The implemented system was tested and the result
was excellent. No-Load test was carried on the
inverter and as well as Load Test. Both results were
very okay. The packaging of the inverter was done so
that the Portable Solar PV Generator would look
presentable. These achievements serve as the criteria
to regard this project work a success.
REFERENCE
[1] Matt Boreland and Darren Bagnall (2006).
“Current and future photovoltaics”, Foresight -
Horizon Scanning Report.
http://eprints.soton.ac.uk/id/eprint/264403
[2] Zhao Chaohui (2008). “Emerging Technology:
Photo-Voltage Generation Status and Trends”.
Journal of Shanghai Dianji University, pp. 104-
109.
[3] "Photovoltaic’s Report"(pdf). Franhofer ISE. 28
July 2014.Archived (pdf) from the original, 31
August. Retrieved 31 August 2014.
[4] David I., Thomas B. R. (ed).Handbook of
batteries, 3rd Edition.Mc Graw.Hill
[5] Http://Courses.lumenlearning.com/introchen/ch
apter/other-rechargeable-batteries/
[6] Trishan Esram and Patrick L. Chapman (2007)
"Comparison of Photovoltaic Array Maximum
Power Point Tracking Techniques" Ieee
Transactions on Energy Conversion, Vol. 22,
No. 2,
[7] Md. Rabiul Islam, Youguang Guo, Jian Guo
Zhu, M.G Rabbani (2010), "Simulation of PV
Array Characteristics and Fabrication of
Microcontroller Based MPPT", 6th
International Conference on Electrical and
Computer Engineering ICECE
[8] L. Zhang, W. G. Hurley and W. Wolfle (2010),
“A New Approach to Achieve Maximum
Power Point Tracking for PV System with a
Variable Inductor,” 2nd IEEE International
Symposium on Power Electronics for
Distributed Generation Systems, pp. 948-952.
[9] P. K. Sahu and M. Manjrekar (2015), "Control
strategies for solar panel companion inverters,"
in IEEE Applied Power Electronics Conference
and Exposition (APEC),, pp. 3075-3082.
[10] V. Agarwal H. Patel (2008). Maximum power
point tracking scheme for pv systems operating
under partially shaded conditions. IEEE Trans.
Ind. Electron., 55:1689{1698.
[11] Crompton T.R. (2000)." Battery reference Book
(Third edition).
[12] Bidyadhar Subudhi (2013), Senior Member,
IEEE, and Raseswari Pradhan "A Comparative
Study on Maximum Power Point Tracking
Techniques for Photovoltaic Power Systems"
IEEE Trans. On Sustainable Energy, VOL. 4,
[13] Datasheet Arduino Development Board Kit “
http://www.arduino.cc/ ”
[14] Shiksha E. K., "Online Lecture" Available:
http://ecourseonline.iarsi-
res.in/mod/resource/view.php?id=93237
[15] Sahu, Prasanth Kumar, and Madhav Manjrekar
(2018). "Investigations on Power Transfer
Operating Spaces of Solar Panel Companion
Inverters." In 2018 9th IEEE International
Symposium on Power Electronics for
Distributed Generation Systems (PEDG), pp. 1-
8.