Dc circuit analysis
•Download as PPTX, PDF•
1 like•529 views
The document summarizes key circuit analysis concepts taught to a group of students including: 1) It discusses the mesh theorem and superposition theorem, which states the voltage across a circuit element is the sum of voltages due to each independent source. 2) It also reviews RC circuits composed of resistors and capacitors, and RL circuits made of resistors and inductors. 3) The document is intended to teach circuit analysis concepts to students including Md. Mohaimanul Islam, Israt Jahan, and Yeakuti Feardus.
Report
Share
Report
Share
Recommended
BASIC ELECTRICAL ENGINEERING BEEE
Electrical Circuit Analysis” BEEE (BE-104),CHARGE AND CURRENT,KCL,KVL,NODAL ANALYSIS, MESH ANALYSIS ,NODE BRANCH VOLTAGE,CURRENT,LOOP,THEOREMS SUPERPOSITION THEOREMS,THEVENINS THEOREM,NORTORN'S THEOREM,SERIES PARALLEL,STAR TO DELTA CONVERSION,DELTA TO STAR CONVERSION
Single phase AC circuits
This document provides a summary of a seminar presentation on analyzing single phase AC circuits. The presentation covered various circuit elements in AC circuits including resistors, inductors, and capacitors in both series and parallel configurations. It discussed the concepts of impedance, phase relationships between voltage and current, and resonance. Resonance occurs when the inductive and capacitive reactances are equal, resulting in maximum current flow. The key topics were analyzing purely resistive, inductive, and capacitive circuits, and combinations using circuit laws and phasor diagrams.
Resonance in series and parallel circuits
This document discusses resonance in series and parallel RLC circuits. It defines key parameters for both circuit types including resonance frequency, half-power frequencies, bandwidth, and quality factor. The series resonance circuit is analyzed showing that impedance is purely resistive at resonance, with maximum current and unity power factor. Parallel resonance is also examined, with admittance being purely conductance at resonance. Formulas for calculating important resonant characteristics are provided.
Voltage Regulators ppt
Content
Introduction
Voltage Regulation
Line Regulation
Load Regulation
Series Regulator
Shunt Regulator
Switching Regulator
IC Voltage Regulator
Star & Delta Connection
This document discusses star and delta connections in 3-phase power systems. It provides symbols and diagrams to illustrate star and delta configurations. Key differences are noted, such as star connections providing a neutral point and being used for lower voltages, while delta connections having no neutral and being used for higher voltages. Formulas are presented relating line and phase voltages and currents for each connection type. Examples are worked through applying the formulas to calculate line voltage from phase voltage in a star-connected motor, and to calculate line current from phase current in a delta-connected motor.
Introduction to Thevenin's theorem
Explaining about one of the popular theorems in electrical engineering, Thevenin's theorem. it gives direct idea about the theorem and its different cases of applicability. Some of easy tricks and facts are also included for convenience.
Electric circuits and networks Basics
Good at basics is important. This presentation will guide you by explaining Electric Circuits and Networks Basics.
Power supply
This document discusses power supplies and switched mode power supplies (SMPS). It begins with an overview of power supplies and their basic components like transformers, rectifiers, and regulators. It then covers the categories of power supplies, including linear regulated and SMPS. The document discusses the components and workings of SMPS in detail, including the inverter, output transformer, rectifier and filter. It covers the advantages of SMPS like higher efficiency and smaller size compared to traditional power supplies. In the end, it discusses different feedback techniques used in SMPS.
Recommended
BASIC ELECTRICAL ENGINEERING BEEE
Electrical Circuit Analysis” BEEE (BE-104),CHARGE AND CURRENT,KCL,KVL,NODAL ANALYSIS, MESH ANALYSIS ,NODE BRANCH VOLTAGE,CURRENT,LOOP,THEOREMS SUPERPOSITION THEOREMS,THEVENINS THEOREM,NORTORN'S THEOREM,SERIES PARALLEL,STAR TO DELTA CONVERSION,DELTA TO STAR CONVERSION
Single phase AC circuits
This document provides a summary of a seminar presentation on analyzing single phase AC circuits. The presentation covered various circuit elements in AC circuits including resistors, inductors, and capacitors in both series and parallel configurations. It discussed the concepts of impedance, phase relationships between voltage and current, and resonance. Resonance occurs when the inductive and capacitive reactances are equal, resulting in maximum current flow. The key topics were analyzing purely resistive, inductive, and capacitive circuits, and combinations using circuit laws and phasor diagrams.
Resonance in series and parallel circuits
This document discusses resonance in series and parallel RLC circuits. It defines key parameters for both circuit types including resonance frequency, half-power frequencies, bandwidth, and quality factor. The series resonance circuit is analyzed showing that impedance is purely resistive at resonance, with maximum current and unity power factor. Parallel resonance is also examined, with admittance being purely conductance at resonance. Formulas for calculating important resonant characteristics are provided.
Voltage Regulators ppt
Content
Introduction
Voltage Regulation
Line Regulation
Load Regulation
Series Regulator
Shunt Regulator
Switching Regulator
IC Voltage Regulator
Star & Delta Connection
This document discusses star and delta connections in 3-phase power systems. It provides symbols and diagrams to illustrate star and delta configurations. Key differences are noted, such as star connections providing a neutral point and being used for lower voltages, while delta connections having no neutral and being used for higher voltages. Formulas are presented relating line and phase voltages and currents for each connection type. Examples are worked through applying the formulas to calculate line voltage from phase voltage in a star-connected motor, and to calculate line current from phase current in a delta-connected motor.
Introduction to Thevenin's theorem
Explaining about one of the popular theorems in electrical engineering, Thevenin's theorem. it gives direct idea about the theorem and its different cases of applicability. Some of easy tricks and facts are also included for convenience.
Electric circuits and networks Basics
Good at basics is important. This presentation will guide you by explaining Electric Circuits and Networks Basics.
Power supply
This document discusses power supplies and switched mode power supplies (SMPS). It begins with an overview of power supplies and their basic components like transformers, rectifiers, and regulators. It then covers the categories of power supplies, including linear regulated and SMPS. The document discusses the components and workings of SMPS in detail, including the inverter, output transformer, rectifier and filter. It covers the advantages of SMPS like higher efficiency and smaller size compared to traditional power supplies. In the end, it discusses different feedback techniques used in SMPS.
Basic Electrical Parameters ( Basic Electrical Engineering)
This presentation contains information about some basic electrical parameters such as Voltage, Current, EMF, PD, Electric Power, Energy Ideal & Practical Sources, Types of Resistance, Heating Effect, Magnetic effect & Chemical effect of Electric Current etc.
Resonance in parallel rlc circuit
This document discusses parallel resonance in an electrical circuit. It defines parallel resonance as occurring when circuit elements are connected in parallel with their inductance and capacitance, causing impedance to rise to a maximum at the resonant frequency. The resonant frequency is where the inductive and capacitive reactances are equal. At resonance, the parallel circuit acts resistive and the impedance is at its peak while the current is at its minimum. Key characteristics of a parallel resonant circuit including impedance, current, susceptance, and bandwidth are explained.
Half wave control rectifier with RL load
In this slide given the description about Half wave control rectifier with RL load its waveform & equation etc..
Halfwave and full wave rectificaton
this presentation describes the half wave rectification and full wave rectification of an AC signal and convert it into pulsating DC output voltage.
Superposition theorem
The superposition theorem allows the analysis of circuits with multiple sources by considering each source independently and adding their effects. It can be applied when circuit elements are linear and bilateral. To use it, all ideal voltage sources except one are short circuited and all ideal current sources except one are open circuited. Dependent sources are left intact. This allows the circuit to be solved for each source individually and the results combined through superposition. Examples demonstrate finding currents through specific elements in circuits with multiple independent and dependent sources. A limitation is that superposition cannot be used to determine total power due to power being related to current squared.
dc circuits
1) DC circuits can be linear or non-linear depending on whether their parameters such as resistance, inductance, and capacitance remain constant or change with voltage and current.
2) Kirchhoff's laws, including Kirchhoff's current law and Kirchhoff's voltage law, are important laws for analyzing electrical circuits and networks.
3) Circuit analysis methods such as mesh analysis, nodal analysis, and Thevenin's theorem allow circuits to be simplified to aid in calculation of voltage and current.
Resistors
A resistor is an electrical component that opposes or resists the flow of electric current. It works by converting electrical energy into heat energy as current passes through it. Resistors are commonly used to regulate current and voltage levels in electronic circuits. They come in various types defined by their material and manufacturing process, and their resistance values are color coded for easy identification.
rectifiers
This document discusses various rectifier circuits including half wave, full wave, center tap, and bridge rectifiers. It provides details on their circuit diagrams, operation, waveforms, parameters like ripple factor, efficiency, peak inverse voltage, advantages and disadvantages. Half wave rectifiers are shown to have high ripple factor and low efficiency while bridge rectifiers have advantages of not requiring a center tap transformer and using lower voltage diodes.
Phasor diagram
The document discusses phasor diagrams and equivalent circuits of transformers. It presents phasor diagrams showing the relationship between voltages and currents for transformers under no load, unity power factor load, lagging power factor load, and leading power factor load conditions. It then derives the equivalent circuit models of transformers by representing the transformer components like winding resistances and leakage fluxes as circuit elements. The equivalent circuits are developed with parameters referred to both the primary and secondary sides. Approximate equivalent circuits neglecting the no-load current are also presented.
Silicon controlled rectifier
This document provides an overview of the silicon controlled rectifier (SCR). It discusses the SCR's four-layer semiconductor structure with three p-n junctions. The document outlines the SCR's history, construction, v-i characteristics, switching on and off methods, applications, advantages, and disadvantages. Key points covered include the SCR's ability to handle large voltage, current and power; its simple triggering circuit and control; and its limitations for higher frequency use and negative gate current.
Ac bridge
A.C. bridges are circuits used to measure unknown resistances, capacitances, inductances, frequencies, and mutual inductances. Some common bridges include the Wheatstone bridge for measuring resistance using direct current, Maxwell's bridges for measuring inductance using alternating current, and the De Sauty, Schering, Wien series, and Wien parallel bridges for measuring capacitance using various balanced circuit configurations. Each bridge uses a balanced circuit equation to relate known components to unknown values.
Three phase-circuits
The document discusses three-phase circuits and provides information on:
- The advantages of three-phase supply systems such as higher efficiency of power transfer and smoother load characteristics.
- Key concepts like phase sequence, balanced/unbalanced supply and load, and the relationships between line and phase voltages and currents.
- How to calculate power in a balanced three-phase system and use two wattmeters to measure total power and power factor.
Power electronics Phase Controlled Rectifiers - SCR
This chapter introduces ideas on phase controlled SCR operated rectifiers. i.e. controlled rectifiers.
Presentation topic is transmission line
This presentation discusses transmission lines, including overhead power lines and underground cables. It classifies transmission lines as overhead or underground, and further divides them based on voltage and construction. Overhead lines are cheaper but can be affected by the environment, while underground cables are more expensive to install and maintain but are safer and not impacted by the environment. The presentation also covers nominal T and Pi circuit models that can be used to analyze medium transmission lines, and provides equations for calculating voltages and currents at the sending and receiving ends.
Diode
This document provides an introduction to diodes, including their definition as a semiconductor with a PN junction, doping process using donor and acceptor ions, symbol showing anode and cathode, and working principles when unbiased, forward biased, and reverse biased. It lists types of diodes and their applications such as in rectifiers, clippers, clamps, and logic gates. The document outlines topics covered and provides additional resources for learning about the history and uses of diodes.
Maximum Power Transfer Theorem
In electrical engineering, the maximum power transfer theorem states that, to obtain maximum external power from a source with a finite internal resistance, the resistance of the load must equal the resistance of the source as viewed from its output terminals.
Kirchoff's law
Kirchhoff's laws provide a means to obtain equations to solve electrical circuits. There are two laws:
1) Kirchhoff's Current Law (KCL) states that the total current entering a junction equals the total current leaving. It is a statement of charge conservation.
2) Kirchhoff's Voltage Law (KVL) states that the sum of the voltages around any closed loop is equal to zero. It is a statement of energy conservation.
These laws allow the currents and voltages in a circuit to be determined by writing KCL and KVL equations and solving them simultaneously.
Voltage and Current Source foe Circuits and Networks
This document discusses voltage and current sources. It defines voltage as potential difference between two points in an electrical field and current as the flow of electric charge. Energy sources are categorized as either voltage sources or current sources. Voltage sources produce an electromotive force that causes current to flow independently of current. Current sources have infinite output resistance so current flow is independent of voltage. Ohm's law relates voltage, current, and resistance. Resistors oppose current flow. Kirchhoff's laws state that the sum of currents at a node is zero and the sum of voltages around a loop is zero.
Bridge Measurement Circuit
This document discusses different types of bridge circuits used to measure electrical components. It describes Maxwell's bridge which can measure inductance by comparing it to a variable standard inductance or capacitance. Maxwell's inductance bridge measures inductance directly while his inductance-capacitance bridge measures it based on a variable capacitor. DeSauty bridge is a simple four-arm circuit to compare two capacitances. Schering bridge is widely used to measure unknown capacitors and dielectric losses at alternating current. It has a balance equation independent of frequency.
Diode bridge rectifier_ppt
A bridge rectifier circuit converts alternating current (AC) to direct current (DC) using four diodes arranged in a bridge configuration. It works like a Wheatstone bridge but does not require a center-tapped transformer. The voltage drop is double that of a single diode rectifier due to the use of two additional diodes. A bridge rectifier takes a time-varying alternating voltage and produces a unidirectional pulsating DC voltage.
RGPV BE Ist SEM BEE104 Unit I
This document provides an overview of basic electrical concepts and circuit analysis for engineering students. It covers topics like voltage and current sources, Kirchhoff's laws, Thevenin's and superposition theorems, AC circuits including power calculations, and three-phase systems. The key points are:
1) It defines fundamental electrical terms and describes different types of sources and circuit analysis methods like mesh and nodal analysis.
2) Kirchhoff's laws are introduced for analyzing circuits using the concepts of current law and voltage law.
3) Thevenin's and superposition theorems are summarized as techniques for simplifying circuits with multiple sources.
4) Single-phase AC circuits are covered including definitions
BEE_PPT_1.pdf
This document provides an overview of basic electrical engineering concepts including:
1) Definitions of key terms like current, voltage, power, and circuit components. Kirchhoff's laws and Ohm's law are also introduced.
2) Explanations of different types of electric circuits and connections for components including series and parallel.
3) Descriptions of different circuit elements like resistors, sources, and Kirchhoff's laws for analyzing circuits.
More Related Content
What's hot
Basic Electrical Parameters ( Basic Electrical Engineering)
This presentation contains information about some basic electrical parameters such as Voltage, Current, EMF, PD, Electric Power, Energy Ideal & Practical Sources, Types of Resistance, Heating Effect, Magnetic effect & Chemical effect of Electric Current etc.
Resonance in parallel rlc circuit
This document discusses parallel resonance in an electrical circuit. It defines parallel resonance as occurring when circuit elements are connected in parallel with their inductance and capacitance, causing impedance to rise to a maximum at the resonant frequency. The resonant frequency is where the inductive and capacitive reactances are equal. At resonance, the parallel circuit acts resistive and the impedance is at its peak while the current is at its minimum. Key characteristics of a parallel resonant circuit including impedance, current, susceptance, and bandwidth are explained.
Half wave control rectifier with RL load
In this slide given the description about Half wave control rectifier with RL load its waveform & equation etc..
Halfwave and full wave rectificaton
this presentation describes the half wave rectification and full wave rectification of an AC signal and convert it into pulsating DC output voltage.
Superposition theorem
The superposition theorem allows the analysis of circuits with multiple sources by considering each source independently and adding their effects. It can be applied when circuit elements are linear and bilateral. To use it, all ideal voltage sources except one are short circuited and all ideal current sources except one are open circuited. Dependent sources are left intact. This allows the circuit to be solved for each source individually and the results combined through superposition. Examples demonstrate finding currents through specific elements in circuits with multiple independent and dependent sources. A limitation is that superposition cannot be used to determine total power due to power being related to current squared.
dc circuits
1) DC circuits can be linear or non-linear depending on whether their parameters such as resistance, inductance, and capacitance remain constant or change with voltage and current.
2) Kirchhoff's laws, including Kirchhoff's current law and Kirchhoff's voltage law, are important laws for analyzing electrical circuits and networks.
3) Circuit analysis methods such as mesh analysis, nodal analysis, and Thevenin's theorem allow circuits to be simplified to aid in calculation of voltage and current.
Resistors
A resistor is an electrical component that opposes or resists the flow of electric current. It works by converting electrical energy into heat energy as current passes through it. Resistors are commonly used to regulate current and voltage levels in electronic circuits. They come in various types defined by their material and manufacturing process, and their resistance values are color coded for easy identification.
rectifiers
This document discusses various rectifier circuits including half wave, full wave, center tap, and bridge rectifiers. It provides details on their circuit diagrams, operation, waveforms, parameters like ripple factor, efficiency, peak inverse voltage, advantages and disadvantages. Half wave rectifiers are shown to have high ripple factor and low efficiency while bridge rectifiers have advantages of not requiring a center tap transformer and using lower voltage diodes.
Phasor diagram
The document discusses phasor diagrams and equivalent circuits of transformers. It presents phasor diagrams showing the relationship between voltages and currents for transformers under no load, unity power factor load, lagging power factor load, and leading power factor load conditions. It then derives the equivalent circuit models of transformers by representing the transformer components like winding resistances and leakage fluxes as circuit elements. The equivalent circuits are developed with parameters referred to both the primary and secondary sides. Approximate equivalent circuits neglecting the no-load current are also presented.
Silicon controlled rectifier
This document provides an overview of the silicon controlled rectifier (SCR). It discusses the SCR's four-layer semiconductor structure with three p-n junctions. The document outlines the SCR's history, construction, v-i characteristics, switching on and off methods, applications, advantages, and disadvantages. Key points covered include the SCR's ability to handle large voltage, current and power; its simple triggering circuit and control; and its limitations for higher frequency use and negative gate current.
Ac bridge
A.C. bridges are circuits used to measure unknown resistances, capacitances, inductances, frequencies, and mutual inductances. Some common bridges include the Wheatstone bridge for measuring resistance using direct current, Maxwell's bridges for measuring inductance using alternating current, and the De Sauty, Schering, Wien series, and Wien parallel bridges for measuring capacitance using various balanced circuit configurations. Each bridge uses a balanced circuit equation to relate known components to unknown values.
Three phase-circuits
The document discusses three-phase circuits and provides information on:
- The advantages of three-phase supply systems such as higher efficiency of power transfer and smoother load characteristics.
- Key concepts like phase sequence, balanced/unbalanced supply and load, and the relationships between line and phase voltages and currents.
- How to calculate power in a balanced three-phase system and use two wattmeters to measure total power and power factor.
Power electronics Phase Controlled Rectifiers - SCR
This chapter introduces ideas on phase controlled SCR operated rectifiers. i.e. controlled rectifiers.
Presentation topic is transmission line
This presentation discusses transmission lines, including overhead power lines and underground cables. It classifies transmission lines as overhead or underground, and further divides them based on voltage and construction. Overhead lines are cheaper but can be affected by the environment, while underground cables are more expensive to install and maintain but are safer and not impacted by the environment. The presentation also covers nominal T and Pi circuit models that can be used to analyze medium transmission lines, and provides equations for calculating voltages and currents at the sending and receiving ends.
Diode
This document provides an introduction to diodes, including their definition as a semiconductor with a PN junction, doping process using donor and acceptor ions, symbol showing anode and cathode, and working principles when unbiased, forward biased, and reverse biased. It lists types of diodes and their applications such as in rectifiers, clippers, clamps, and logic gates. The document outlines topics covered and provides additional resources for learning about the history and uses of diodes.
Maximum Power Transfer Theorem
In electrical engineering, the maximum power transfer theorem states that, to obtain maximum external power from a source with a finite internal resistance, the resistance of the load must equal the resistance of the source as viewed from its output terminals.
Kirchoff's law
Kirchhoff's laws provide a means to obtain equations to solve electrical circuits. There are two laws:
1) Kirchhoff's Current Law (KCL) states that the total current entering a junction equals the total current leaving. It is a statement of charge conservation.
2) Kirchhoff's Voltage Law (KVL) states that the sum of the voltages around any closed loop is equal to zero. It is a statement of energy conservation.
These laws allow the currents and voltages in a circuit to be determined by writing KCL and KVL equations and solving them simultaneously.
Voltage and Current Source foe Circuits and Networks
This document discusses voltage and current sources. It defines voltage as potential difference between two points in an electrical field and current as the flow of electric charge. Energy sources are categorized as either voltage sources or current sources. Voltage sources produce an electromotive force that causes current to flow independently of current. Current sources have infinite output resistance so current flow is independent of voltage. Ohm's law relates voltage, current, and resistance. Resistors oppose current flow. Kirchhoff's laws state that the sum of currents at a node is zero and the sum of voltages around a loop is zero.
Bridge Measurement Circuit
This document discusses different types of bridge circuits used to measure electrical components. It describes Maxwell's bridge which can measure inductance by comparing it to a variable standard inductance or capacitance. Maxwell's inductance bridge measures inductance directly while his inductance-capacitance bridge measures it based on a variable capacitor. DeSauty bridge is a simple four-arm circuit to compare two capacitances. Schering bridge is widely used to measure unknown capacitors and dielectric losses at alternating current. It has a balance equation independent of frequency.
Diode bridge rectifier_ppt
A bridge rectifier circuit converts alternating current (AC) to direct current (DC) using four diodes arranged in a bridge configuration. It works like a Wheatstone bridge but does not require a center-tapped transformer. The voltage drop is double that of a single diode rectifier due to the use of two additional diodes. A bridge rectifier takes a time-varying alternating voltage and produces a unidirectional pulsating DC voltage.
What's hot (20)
Basic Electrical Parameters ( Basic Electrical Engineering)
Basic Electrical Parameters ( Basic Electrical Engineering)
Power electronics Phase Controlled Rectifiers - SCR
Power electronics Phase Controlled Rectifiers - SCR
Voltage and Current Source foe Circuits and Networks
Voltage and Current Source foe Circuits and Networks
Similar to Dc circuit analysis
RGPV BE Ist SEM BEE104 Unit I
This document provides an overview of basic electrical concepts and circuit analysis for engineering students. It covers topics like voltage and current sources, Kirchhoff's laws, Thevenin's and superposition theorems, AC circuits including power calculations, and three-phase systems. The key points are:
1) It defines fundamental electrical terms and describes different types of sources and circuit analysis methods like mesh and nodal analysis.
2) Kirchhoff's laws are introduced for analyzing circuits using the concepts of current law and voltage law.
3) Thevenin's and superposition theorems are summarized as techniques for simplifying circuits with multiple sources.
4) Single-phase AC circuits are covered including definitions
BEE_PPT_1.pdf
This document provides an overview of basic electrical engineering concepts including:
1) Definitions of key terms like current, voltage, power, and circuit components. Kirchhoff's laws and Ohm's law are also introduced.
2) Explanations of different types of electric circuits and connections for components including series and parallel.
3) Descriptions of different circuit elements like resistors, sources, and Kirchhoff's laws for analyzing circuits.
Circuit Theory- (Electronics)
Covere all network theorems and circuit elemts.
one can use thsi pdf to study beacuse all the important topics are covered in this.
Ekeeda backlinks
Ekeeda Provides Online Video Lectures, Tutorials & Engineering Courses Available for Top-Tier Universities in India. Lectures from Highly Trained & Experienced Faculty!
Ekeeda - First Year Enginering - Basic Electrical Engineering
The First Year engineering course seems more like an extension of the subjects that students have learned in their 12th class. Subjects like Engineering Physics, Chemistry, and Mathematics, are incorporated into the curriculum. Students will learn about some of the engineering subjects in this first year, and these subjects are similar to all the branches. Everyone will learn some basics related to the other streams in their first year. Ekeeda offers Online First Year Engineering Courses for all the Subjects as per the Syllabus.
Manual 2
This document provides the list of experiments for an Electrical Circuits Laboratory Manual. It includes experiments on characteristics of PN junction diodes, Zener diodes, transistors, rectifiers, FETs, SCRs, and verification of Ohm's law, Kirchhoff's laws, Thevenin's theorem, Norton's theorem, superposition theorem, and maximum power transfer theorem. One experiment is described in detail for verifying Ohm's law, including the apparatus required, theory, procedure, sample calculations and results. The document also provides circuit diagrams for experiments verifying Kirchhoff's laws, Thevenin's theorem, and Norton's theorem.
B tech ee ii_ eee_ u-1_ dc circuit analysis_dipen patel
The document discusses DC circuit analysis and various circuit concepts. It defines a DC circuit as consisting of a conducting loop through which current flows. Common circuit elements like resistors and batteries are described. Kirchhoff's laws of junctions and loops are explained, stating that the algebraic sum of currents at a node equals zero, and the algebraic sum of voltages around a closed loop equals zero. Ideal and dependent voltage and current sources are defined. Nodal and mesh analysis methods for solving circuits are introduced.
Diploma i boee u 2 dc circuit analysis
This document provides an overview of direct current (DC) circuits and circuit analysis techniques. It defines key concepts like voltage sources, current sources, ideal and real sources, and dependent and independent sources. It also explains Kirchhoff's laws, nodal analysis, and mesh analysis. Kirchhoff's current law states that the algebraic sum of currents at a node is zero. Kirchhoff's voltage law states that the algebraic sum of voltages in a closed loop is zero. Nodal analysis uses Kirchhoff's current law to set up equations relating node voltages. Mesh analysis uses Kirchhoff's voltage law to set up equations relating mesh currents.
AC and DC circuits Presentation
This document defines key terms and concepts related to electrical circuits and networks. It discusses different types of circuits including linear/non-linear, bilateral/unilateral circuits. It also defines electrical networks and their components such as nodes, branches, loops and meshes. Finally, it covers important circuit analysis techniques including Ohm's law, Kirchhoff's laws, mesh analysis, nodal analysis and superposition theorem.
Mesh and nodal
This document provides information on different electrical concepts including:
- Voltage, current, and resistance definitions.
- Electric power formula using voltage, current, energy, and time.
- Active and passive electronic components and their definitions.
- Ohm's law relating voltage, current, and resistance.
- Current and voltage division rules for circuits with parallel and series resistors.
- Ideal and non-ideal voltage and current sources and their characteristics.
- Examples of calculations using the concepts covered.
Ac fundamental
This document contains the syllabus and content outline for a course on Basic Electrical Engineering. It covers topics such as Ohm's Law, Kirchhoff's Laws, network analysis techniques including nodal analysis and mesh analysis, AC circuit analysis using phasors, series and parallel RLC circuits, network theorems, resonance, and fundamentals of electrical machines including transformers, induction motors, and DC motors. The course aims to provide students a strong foundation in core electrical engineering concepts and their practical applications.
Basic Electrical Engineering
This document contains the syllabus and content outline for a course on Basic Electrical Engineering. It covers topics such as Ohm's Law, Kirchhoff's Laws, network analysis techniques including nodal analysis and mesh analysis, AC circuit analysis using phasors, series and parallel RLC circuits, network theorems, resonance, and fundamentals of electrical machines including transformers, induction motors, and DC motors. The course aims to provide students a strong foundation in core electrical engineering concepts and their practical applications.
Beee
This document contains the syllabus and content outline for a course on Basic Electrical Engineering. It covers topics such as Ohm's Law, Kirchhoff's Laws, network analysis techniques including nodal analysis and mesh analysis, AC circuit analysis using phasors, series and parallel RLC circuits, network theorems, resonance, and fundamentals of electrical machines including transformers, induction motors, and DC motors. The course aims to provide students a strong foundation in core electrical engineering concepts and their practical applications.
BEEE.pdf
This document contains the syllabus and content outline for a Basic Electrical Engineering course. It covers several fundamental topics:
1. Ohm's law, Kirchhoff's laws, nodes and branches analysis, series and parallel circuit analysis using voltage and current division.
2. AC circuit fundamentals including phasors, impedance, reactance of circuit elements. Mesh and nodal analysis of AC circuits.
3. RMS values, power calculations for RLC circuits, network theorems including superposition, Thevenin's, Norton's and maximum power transfer. Resonance analysis.
4. Fundamentals of electrical machines including single phase transformers, induction motors, and DC motors.
It provides
fault current limiter based hybrid hvdc breaker
This is a presentation to my conference paper titled "Evaluation of Electrical and Thermal Stresses in Conventional and Solid-State Fault Current Limiter-Based Hybrid HVDC Circuit Breaker"
Fundamental concepts of electrical engineering
Kirchhoff's laws are fundamental circuit analysis tools. Kirchhoff's voltage law states that the sum of the voltages around any closed loop in a circuit must be zero. Kirchhoff's current law states that the algebraic sum of the currents entering and leaving any node in a circuit must be zero. These laws are based on conservation of energy and charge, respectively. They allow analysis of the relationship between voltages and currents in any circuit.
Alternating current circuits
This document provides an outline and overview of key concepts in alternating current (AC) circuits including:
1. AC sources and how AC voltage and current vary sinusoidally over time.
2. The behavior of resistors, inductors, and capacitors in AC circuits, including how their current and voltage are phase shifted.
3. Series RLC circuits and the concept of resonance where the current is at its maximum.
4. Power calculations in AC circuits and the power factor.
5. Transformers and how they are used for power transmission. Electrical filters are also discussed.
superposition theorem
This document discusses the superposition theorem for electrical circuits. The superposition theorem states that the response in any branch of a linear circuit with multiple independent sources is equal to the sum of the responses from each source acting alone. It works by replacing all other sources with their internal impedances (short circuits for voltage sources, open circuits for current sources) and calculating the contribution of each source individually. The superposition theorem is important for circuit analysis and is used to convert circuits into equivalent Norton or Thevenin circuits. It applies to linear networks containing independent sources, linear dependent sources, resistors, inductors, and capacitors.
Alternating current circuits
This document provides an outline and objectives for a chapter on alternating current (AC) circuits. The chapter will describe AC circuits and investigate the characteristics of simple series circuits containing resistors, inductors, and capacitors driven by sinusoidal voltage. It will also illustrate the functions of transformers, power transmission, and electrical filters. The key topics are: AC sources, resistors and phasors in AC circuits, inductors which cause current to lag voltage, capacitors which cause voltage to lag current, RLC series circuits, power in AC circuits including power factor, and resonance in RLC circuits where current is maximized. Students are assigned to redraw resonance curves using Excel and read sections on transformers and rectifiers/filters.
NETWORK ANALYSIS PART 2 For GATE IES PSU -2020 RRB/SSC AE JE TECHNICAL INT...
Dear students Visit youtube channel for video
https://youtu.be/NSdIbrxIE74
# Previous videos in channel for learning
https://youtu.be/NSdIbrxIE74
# Network Analysis Part 1
https://youtu.be/UWSHxL8Daro
# Network Analysis Part 2
https://youtu.be/fPzCrnBlsIA
AC motors Comparision
https://youtu.be/Nwo8IfNdQZA
Wound Rotor and squirrel cage rotor
https://youtu.be/Y_WoddRiVSE
What is electrical Machine
https://youtu.be/N4xWOwgi8I4
Overview of Power plants
https://youtu.be/kPWElNXvxGs
How to Study for success
https://youtu.be/A_L1lI3zOsc
Why unemployment of Indian engineers
https://youtu.be/pdLe1Z4RRGs
Why I do engineering
https://youtu.be/DTtRl1t2DaM
GATE IES SSC JE RRB NTPC BHEL ki taiyari ghar se.TECHNICAL INTERVIEW ki taiyari EE EC aur EX students ke liye.Prepare for GATE IES and AE JE SSE engineers at home from best teacher E TUTOR.Series of electrical engineering subjects.first subject id Network analysis circuit theory
NETWORK ANALYSIS CIRCUIT THEORY basics of electrical engineering kirchhoff law KVL KCl ohms law filter types of filter.
for more videos please visit my channel .Links of all videos are given below.
Network Analysis DAY-2
https://youtu.be/NSdIbrxIE74
Difference between a Network and circuit,
branch and a node
mesh and a Loop of active and passive elements
unilateral and bilateral
linear and non-linear ,Lumped and distributed
electrical energy sources ,electric field strength
conductance
Conductivity,FILTER & PROPERTIES
Define filter
characteristics of filter?
active filter
Similar to Dc circuit analysis (20)
Ekeeda - First Year Enginering - Basic Electrical Engineering
Ekeeda - First Year Enginering - Basic Electrical Engineering
B tech ee ii_ eee_ u-1_ dc circuit analysis_dipen patel
B tech ee ii_ eee_ u-1_ dc circuit analysis_dipen patel
NETWORK ANALYSIS PART 2 For GATE IES PSU -2020 RRB/SSC AE JE TECHNICAL INT...
NETWORK ANALYSIS PART 2 For GATE IES PSU -2020 RRB/SSC AE JE TECHNICAL INT...
More from East west University
Light Fidelity
LiFi is a mobile wireless technology that uses light rather than radio frequencies to transmit data. The technology is supported by a global ecosystem of companies driving the adoption of LiFi, the next generation of wireless that is ready for seamless integration into the 5G core.Li-Fi is wireless communication technology which utilizes light to transmit data and position between devices. The term was first introduced by Harald Haas during a 2011 TEDGlobal talk in Edinburgh
APD & Laser Diode
This presentation is about Optical detector (APD) of a specific commercial model and what does it do with addition to Laser Diode and it’s commercial use also from a specific model
Glucose Meter
An optoelectronic sensor produces an electrical signal proportional to incident light. Color sensors determine color by emitting light and analyzing reflected light. Integrated color sensors in blood glucose meters use the light-reflectance method, where a test strip undergoes a color change or light properties change based on blood glucose content. A proposed colorimeter would use color measurement instead of absorbance to eliminate nonlinearity issues above 400mg/dl glucose concentration. An RGB color sensor converts light to proportional voltage outputs for each color channel, connected to a microcontroller and computer for color measurement analysis and display.
Medical dsp
This document discusses several medical applications of digital signal processing (DSP). It describes how DSP is used in hearing aids to compress sound amplitudes and control gain levels. It also explains how DSP is applied to analyze brain signals like electroencephalograms (EEGs) to diagnose neurological conditions by enhancing certain frequency bands. Finally, it discusses how DSP can be used to filter out noise from blood pressure signals, such as power line interference, to improve sampling rates and extract clinically relevant information.
Zener diode 212
This document provides information about Zener diodes. It begins by listing the group members and then describes the key differences between regular diodes and Zener diodes. Zener diodes allow current to flow in both directions, unlike regular diodes, and can regulate voltage. The document discusses Clarence Zener, the physicist who discovered the property that Zener diodes exploit. It provides details on Zener diode symbols, how they operate under forward and reverse bias, their voltage regulation applications, and characteristics like breakdown voltage.
Ete 107
The Digital Revolution began in the 1980s and refers to the shift from analog to digital technologies. It started with the development of the transistor and computer in the 1940s-1970s and the introduction of the internet in the 1980s. Throughout the 1990s and 2000s, digital technologies like the World Wide Web, mobile phones, and other devices became widespread. While digital technologies have increased efficiency and connectivity, they have also led to greater dependency on machines that can leave people disadvantaged when technologies break down.
Ete 107
Digital electronics deals with digital signals to perform tasks using binary digits. It was needed because analog systems were less accurate and slower. Digital systems can operate faster and at higher frequencies than analog equivalents. Digital electronics uses smaller integrated circuits that occupy less area and are more accurate than analog measuring instruments. The development of digital electronics began with ideas in the 1700s and progressed through transistors, computers, the internet, and mobile devices in recent decades. It has advanced fields like education but increased dependency on technology.
Calculus
This document is a report submitted by seven students to Sajal Chakroborty on the topic of calculus. It defines calculus and discusses its origins and inventors. It explains that calculus is used in physics, engineering, economics, and other fields. The document then covers topics within calculus including differentiation, integration, maxima and minima, and applications such as modeling tumor growth. It concludes that calculus has many real-world applications and has been crucial to advances in fields like engineering, science, and technology.
Apps idea about health
This document discusses developing a health app called "Health instructor" to address issues with existing health apps. It would track daily activity through a pedometer and heart rate monitor, provide exercise and weight loss coaching, send reminders and notifications, and offer health tips. The document suggests this app could be successfully marketed and profitable by leveraging people's growing health consciousness and smartphone usage.
App idea
The group members for this project are Nabilah Tasneem and MD. Arif Shariyar. The document discusses showing videos for 5 seconds. It concludes with a thank you.
Climate change and mental health
The document discusses how climate change can negatively impact mental health in several ways. Rising global temperatures and more extreme weather events are linked to increased rates of anxiety, depression, PTSD, and suicidal thoughts. Specific groups made vulnerable include farmers affected by drought, children and women after disasters, first responders, and homeless populations. Seasonal affective disorder may also be exacerbated by changes in daylight hours due to climate change. More research is still needed to fully understand the relationship between climate change and mental health.
Simple harmonic oscillator
This document discusses the simple harmonic oscillator. It defines a simple harmonic oscillator as an oscillator that is neither driven nor damped, with motion that is periodic and sinusoidal with constant amplitude. The acceleration of a body in simple harmonic motion is directly proportional to and directed towards the displacement from the equilibrium position. General equations for displacement, velocity, and acceleration as a function of time and other variables are provided. Quantum mechanical treatment of the simple harmonic oscillator is also summarized. Examples of simple harmonic oscillators include a mass on a spring and a simple pendulum in small angle approximation.
Application of radar wave in antenna
The document discusses the application of radar waves and antennas. It defines radar as using radio waves to detect objects, and an antenna as a device that transmits or receives electromagnetic waves. It then describes how radar works using an antenna to transmit radio waves that bounce off objects and return to the antenna and receiver. It lists five main applications of radar: military uses, air traffic control, weather observation, remote sensing, and ground traffic control. It also discusses common types of antennas used for ultra-high frequency and very-high frequency communications and extremely low frequency systems. Advantages and disadvantages of radar are provided.
More from East west University (13)
Recently uploaded
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneConstructing Your Course Container for Effective Communication
Communicating effectively and consistently with students can help them feel at ease during their learning experience and provide the instructor with a communication trail to track the course's progress. This workshop will take you through constructing an engaging course container to facilitate effective communication.
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience Wahiba Chair Training & Consulting
Wahiba Chair's Talk at the 2024 Learning Ideas Conference. Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Topic : Bed making
Subject : Nursing Foundation
Solutons Maths Escape Room Spatial .pptx
Solutions of Puzzles of Mathematics Escape Room Game in Spatial.io
The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
Recently uploaded (20)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Constructing Your Course Container for Effective Communication
Constructing Your Course Container for Effective Communication
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
How to Create a More Engaging and Human Online Learning Experience
How to Create a More Engaging and Human Online Learning Experience
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Bed Making ( Introduction, Purpose, Types, Articles, Scientific principles, N...
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Dc circuit analysis
- 1. DC CIRCUIT ANALYSIS Group members: MD.Mohaimanul Islam 2016-2-55-036 Israt Jahan 2016-2-55-005 Yeakuti feardus 2016-2-55-010
- 2. DC CIRCUIT : Electronic circuit element Active element Passive element
- 4. NADAL ANALYSUIS AND MAXIMUM POWER TRANSFORMATION
- 5. SUPER POSTION THEOREM The super position principles states that the voltage across an element in a linear circuit is the algebraic sum of the voltages across that element due to each independent source acting alone. fig :a fig:b fig :c Super position is not limited to circuit analysis but is applicable in many fields where cause and effect bear a linear relation ship to one another.
- 6. RC CIRCUIT A resistor capacitor circuit (RC circuit), or RC filter or RC network , is an electric circuit composed of resistors and capacitors driven by a voltage or current source.
- 7. RL CIRCUIT A resistor–inductor circuit (RL circuit), or RL filter or RL network, is an electric circuit composed of resistors and inductors driven by a voltage or current source. A first-order RL circuit is composed of one resistor and one inductor and is the simplest type of RL circuit.