This review paper deals with the evolution of the general processes employed in the suction process of IC
Engines. The suction process has evolved from the traditional use of carburettors to much more sophisticated
systems like CRDi, MPFi, etc. used in modern days. In doing so, various parameters such as the volumetric
efficiency and the turbulence, etc. inside the engine have to be considered. Additional processes such as
supercharging and turbocharging are employed to improve these parameters. It is also highly desirable to vary
the Air-Fuel ratio effectively according to the speed of the engine for better power output and mileage. Thus
researchers have developed several ways over the years to achieve it. Recent research work being carried out in
this field is in the areas of Pressure Wave Superchargers, Variable Geometry Turbochargers, Multiple Intake
valves, Shrouded Intake Valves, Camless Engines etc. Many of these technologies have been employed in the
industry such as the DTS-Si, TDi&i-vtec Engines. Thus, the Automobile Industry has come a long way in
evolving the intake processes and further developments will always be on the way.
Electronic Fuel Injection in Internal Combustion EnginesHassan Raza
This presentation was prepared by Mechanical Engineers during their final year in their Internal Combustion Engine program offered at University of Engineering and Technology Lahore.
The document discusses multipoint fuel injection (MPFI) systems as an improvement over carburetors. MPFI systems inject fuel directly into engine cylinders and are controlled electronically by an engine control unit (ECU) to provide optimal air-fuel ratios under varying driving conditions. This leads to better engine performance, emissions control, fuel efficiency, and drivability compared to carburetors. The key components of an MPFI system are the air intake, fuel delivery, electronic control, and emission control systems.
Types of Fuel Injection systems in Spark Ignition and Compression Ignition En...Hassan Raza
This presentation was prepared by Mechanical Engineers during their final year in their Internal Combustion Engine program offered at University of Engineering and Technology Lahore.
Multipoint fuel injection (MPFI) systems provide better control of the air-fuel ratio compared to carburetors. MPFI systems use multiple fuel injectors, with one injector per cylinder, to inject fuel into the engine's intake ports or manifold. This allows supplying the optimum air-fuel ratio to each cylinder for all operating conditions. MPFI systems are electronically controlled using sensors to monitor various engine parameters and optimize fuel delivery and emissions performance. While more complex than carburetors, MPFI systems improve fuel efficiency, power, and reduce emissions.
This document discusses the MPFI (Multi-Point Fuel Injection) system. It includes sections on the working principle, components like the air intake system, fuel delivery system, and electronic control system. The emission control system uses a catalytic converter to reduce emissions by promoting complete combustion. Key sensors provide feedback to the ECU to optimize the air-fuel ratio for better performance and fuel efficiency while meeting emission standards.
The document discusses multi-point fuel injection (MPFI) systems. It describes the components of an MPFI system, including the air intake system, pressure regulator system, control system, fuel pump control system, and functional divisions. An MPFI system injects fuel into individual cylinders based on commands from the engine control module. This provides faster throttle response and higher output under varying driving conditions compared to carburetor systems. The MPFI system can be divided into three main components: the electronic control unit, fuel system, and air induction system.
This document provides an overview of common rail direct injection (CRDI) technology for diesel engines. It discusses the history and development of CRDI, the operating principle, key components like the high-pressure pump and fuel rail, and how it works. CRDI allows for more precise fuel injection compared to older direct injection systems, improving power, efficiency and reducing emissions. It sees widespread use in modern passenger vehicles from many automakers. The document also covers the differences between direct and indirect injection, advantages and disadvantages of CRDI, and common applications.
The document discusses electronic fuel injection systems and their components. It explains the differences between throttle body, port, and central port injection systems. The objectives are to describe the operation of major EFI components like fuel injectors, control modules, sensors that provide input on engine operation, and operating modes like open loop, closed loop, and clear flood. It also summarizes different types of port fuel injection firing systems and gasoline direct injection features and components.
Electronic Fuel Injection in Internal Combustion EnginesHassan Raza
This presentation was prepared by Mechanical Engineers during their final year in their Internal Combustion Engine program offered at University of Engineering and Technology Lahore.
The document discusses multipoint fuel injection (MPFI) systems as an improvement over carburetors. MPFI systems inject fuel directly into engine cylinders and are controlled electronically by an engine control unit (ECU) to provide optimal air-fuel ratios under varying driving conditions. This leads to better engine performance, emissions control, fuel efficiency, and drivability compared to carburetors. The key components of an MPFI system are the air intake, fuel delivery, electronic control, and emission control systems.
Types of Fuel Injection systems in Spark Ignition and Compression Ignition En...Hassan Raza
This presentation was prepared by Mechanical Engineers during their final year in their Internal Combustion Engine program offered at University of Engineering and Technology Lahore.
Multipoint fuel injection (MPFI) systems provide better control of the air-fuel ratio compared to carburetors. MPFI systems use multiple fuel injectors, with one injector per cylinder, to inject fuel into the engine's intake ports or manifold. This allows supplying the optimum air-fuel ratio to each cylinder for all operating conditions. MPFI systems are electronically controlled using sensors to monitor various engine parameters and optimize fuel delivery and emissions performance. While more complex than carburetors, MPFI systems improve fuel efficiency, power, and reduce emissions.
This document discusses the MPFI (Multi-Point Fuel Injection) system. It includes sections on the working principle, components like the air intake system, fuel delivery system, and electronic control system. The emission control system uses a catalytic converter to reduce emissions by promoting complete combustion. Key sensors provide feedback to the ECU to optimize the air-fuel ratio for better performance and fuel efficiency while meeting emission standards.
The document discusses multi-point fuel injection (MPFI) systems. It describes the components of an MPFI system, including the air intake system, pressure regulator system, control system, fuel pump control system, and functional divisions. An MPFI system injects fuel into individual cylinders based on commands from the engine control module. This provides faster throttle response and higher output under varying driving conditions compared to carburetor systems. The MPFI system can be divided into three main components: the electronic control unit, fuel system, and air induction system.
This document provides an overview of common rail direct injection (CRDI) technology for diesel engines. It discusses the history and development of CRDI, the operating principle, key components like the high-pressure pump and fuel rail, and how it works. CRDI allows for more precise fuel injection compared to older direct injection systems, improving power, efficiency and reducing emissions. It sees widespread use in modern passenger vehicles from many automakers. The document also covers the differences between direct and indirect injection, advantages and disadvantages of CRDI, and common applications.
The document discusses electronic fuel injection systems and their components. It explains the differences between throttle body, port, and central port injection systems. The objectives are to describe the operation of major EFI components like fuel injectors, control modules, sensors that provide input on engine operation, and operating modes like open loop, closed loop, and clear flood. It also summarizes different types of port fuel injection firing systems and gasoline direct injection features and components.
Seminar on gasoline direct injection...Saran S Nair
The document discusses gasoline direct injection (GDI), which improves fuel efficiency without significantly changing conventional internal combustion engine technology. GDI involves sending pressurized fuel directly into the combustion chamber rather than mixing it with air in the intake manifold. This allows for a higher compression ratio and more precise fuel delivery. GDI provides benefits like reduced fuel consumption and emissions compared to port fuel injection systems, but also presents challenges such as increased complexity, cost, and risk of deposits. Major automakers now offer vehicles with GDI engines.
This document provides information on electronic fuel injection systems. It discusses several key topics:
1) Safety precautions that should be taken when working with fuel injection systems, such as using proper ventilation and protective equipment due to risks of burns and carbon monoxide poisoning.
2) The basic principles of electronic fuel injection, including how multi-point injection systems work with an injector located near each intake port, and how the electronic control unit pulses the injectors to regulate air-fuel ratio.
3) Terms used to classify different types of fuel injection systems, such as single-point injection, multi-point injection, continuous injection, sequential injection, and direct injection.
4) Modes of fuel injection
This document discusses multi-cylinder engines and port fuel injection systems. It describes how port fuel injection helps ensure a uniform air-fuel mixture in each cylinder by injecting the same amount of gasoline into the intake manifold. It then provides details on the components and working of port multi-point fuel injection (MPFI) systems, including electronic control systems, fuel systems, air induction systems, sensors that feed information to the engine control unit, and how this helps precisely control fuel injection.
The document discusses the basics of fuel injection systems in compression ignition (CI) engines. It outlines the key objectives of a fuel injection system which are to meter the correct amount of fuel demanded based on engine load and speed, distribute fuel equally among cylinders, inject fuel at the proper timing and rate, and ensure proper atomization. It also provides details on the typical injection timing window and angle. To achieve these objectives, the key functional components are identified as the pumping element to transport fuel, a metering element to control the fuel supply, a metering control to adjust the metering based on load/speed, and a distribution element to divide fuel evenly among cylinders. Finally, it lists some common types of fuel injection systems used in
Multi Point Fuel Injection System (MPFI) supplies the proper ratio of gasoline and air to engine cylinders without using a carburetor. It varies piston speed using advanced sensors controlled by the Engine Control Unit (ECU). MPFI systems are classified as either port injection or throttle injection based on the placement of the injectors. Port injection sprays fuel into the intake manifold near the intake ports, while throttle injection is similar to a carburetor with injectors controlling fuel mixing. The ECU primarily controls ignition timing and fuel injection quality based on sensor data. MPFI provides benefits like lower costs, higher efficiency, reduced maintenance, and higher engine power compared to carbureted systems.
The document discusses multi-point fuel injection (MPFI) systems. It begins by defining MPFI as a system that uses fuel injectors in each engine cylinder rather than a carburetor to mix fuel and air. It then explains the components of an MPFI system, including fuel injectors, fuel filters, pressure regulators, and sensors that provide input to the engine computer. The document outlines how the computer calculates the optimal fuel amount for each cylinder based on various inputs and controls the injectors accordingly. MPFI systems provide benefits like improved fuel efficiency, reduced emissions, and better engine performance compared to carbureted engines.
This document discusses various types of fuel injection systems used in automotive engines. It begins by explaining the differences between carburetors and fuel injection systems. It then describes several types of petrol injection systems including single point injection, throttle injection, port injection, and multi-point fuel injection. Direct injection systems are also discussed, along with their advantages such as better vaporization and higher efficiency. The document outlines the components and functioning of multi-point fuel injection systems controlled by an electronic control module. It concludes by listing some advantages and disadvantages of using petrol injection systems compared to carburetors.
This document discusses fuel injection systems for compression ignition (CI) engines. It describes how fuel injection systems work by using pressure, rather than engine vacuum, to feed fuel into the engine. This makes fuel injection more efficient than a carburetor. Fuel injection provides improved atomization of fuel, better fuel distribution between cylinders, smoother idle, lower emissions, better cold weather drivability, and increased engine power compared to a carburetor. The document also discusses single-point and multi-point fuel injection systems and how they differ in injecting fuel into the intake manifold or ports.
The document discusses mechanical fuel injection systems for diesel engines. It describes the key components of such a system including the fuel tank, fuel feed pump, injection pump, injectors, and filters. It then covers four main types of injection systems - individual pump and nozzle, unit injector, common rail, and distributor systems. For each system, it explains the basic configuration and operation. The document also discusses injection pumps, governors, injectors, nozzles, spray formation, and equations for determining fuel velocity and injection rate. In summary, it provides an overview of the components, classification, and functioning of mechanical fuel injection systems for diesel engines.
This document discusses multi-point fuel injection (MPFI) systems. It begins by defining MPFI as a system where fuel is injected into individual cylinders based on commands from the engine control unit (ECU). It then describes the key components of an MPFI system including the fuel tank, fuel pump, fuel filter, injectors, intake manifold, fuel lines, ECU, and sensors. The document outlines the stages of fuel injection and discusses sequential and simultaneous injection types. It concludes by explaining the advantages of MPFI systems like improved fuel delivery and throttle response compared to carbureted engines.
Fuel injection in si engine by shubham sanjay sorate ph.no.84215922248421592224
This document discusses different types of fuel injection systems used in gasoline engines, including carburetor port injection (MPFI), direct injection (GDI), and throttle and port injection. It provides details on the advantages of fuel injection over carburetors, such as more precise fuel metering and better integration with engine control systems. The document also explains the differences between indirect injection which injects fuel before the combustion chamber, and direct injection which injects fuel directly into the chamber. It compares various fuel injection systems and discusses their working and advantages.
This document discusses the components and functions of an engine management system. It describes the key elements like the fuel system, airflow system, ignition, injection and sensors that are controlled by the Engine Control Unit (ECU). It also explains different modes of electronic fuel injection and how feedback from sensors is used for closed loop fuel control. Cold start systems and variable intake manifolds are covered as well.
1) The document describes a study investigating the effects of variable intake plenum length on the performance of a spark-ignition engine with electronically controlled fuel injectors.
2) Engine tests were conducted with additional plenum lengths of 16mm, 32mm, 48mm, and 64mm added to the original intake manifold.
3) The results showed that a 32mm plenum extension improved engine thermal efficiency, especially at lower engine speeds up to 3000rpm, while also reducing fuel consumption at high loads and low speeds.
This document discusses various components and operation of electronic fuel injection systems. It describes the purpose and function of components like the fuel injectors, fuel pressure regulator, idle air control valve, and stepper motor. It also explains the different modes of operation for fuel injection systems including starting, open-loop, closed-loop, and modes for acceleration, deceleration, and idle control.
The document provides details about a seminar report on multi-point fuel injection systems. It discusses the main components of an MPFI system including the air intake system, fuel delivery system, and electronic control system. Sensors used in MPFI systems are described such as the manifold absolute pressure sensor, throttle position sensor, oxygen sensor, intake air temperature sensor, engine coolant temperature sensor, and vehicle speed sensor. Advantages of MPFI systems are more uniform air-fuel mixtures, improved fuel efficiency and emissions, and immediate acceleration response due to electronic control.
The document discusses the gasoline direct injection (GDI) system. It describes the main components of the system including sensors that detect engine conditions, an engine control unit that controls the system based on sensor signals, and actuators that operate under ECU control. The ECU performs functions like fuel injection control, idle speed control, and ignition timing control. It also has self-diagnosis capabilities to assist with troubleshooting.
This document discusses the history and components of gasoline injection systems. It begins by explaining why gasoline injection replaced carburetors, noting improvements in efficiency, power, and fuel economy. It then describes the main types of injection systems and their components, including direct injection, port injection, throttle body injection, and multi-point fuel injection. The document outlines the sensors, electronics, and timing involved in electronic fuel injection systems and concludes by comparing the performance of different fuel types with varying injection parameters.
This document discusses multipoint fuel injection (MPFI) systems for gasoline engines. It describes two types of MPFI systems - port injection and throttle injection. In port injection, fuel injectors are placed in the intake manifold near the intake ports to spray fuel into the incoming air before it enters the cylinders. In throttle injection, the system is similar to a carburetor with a throttle valve controlling air intake and sensors controlling fuel mixing. The document outlines the four main components of an MPFI system - the air intake, fuel delivery, electronic control, and emission control systems. It provides details on various sensors used in the electronic control system like throttle position, manifold pressure, engine temperature, oxygen, and vehicle speed sensors. Advantages
The document discusses electronic fuel injection systems used in modern vehicles. It lists group members and contents, then provides an introduction to electronic fuel injection. It describes the main components of the system, including air induction sensors that provide inputs to the electronic control unit (ECU). The ECU then controls various output actuators like fuel injectors. The document outlines different fuel injection types and discusses each component in more detail. It concludes by listing some advantages of electronic fuel injection over conventional carbureted systems.
This document appears to be an email in Spanish from someone named Camille Automatico, but the content is unclear as it only contains their name and email address with no other text.
Según las estadísticas de Second Life, hay 18.000 islas privadas y 3.400 parcelas de tierra principal con un total de 1.429 km2, y las transacciones económicas en Linden dólares siguen las cotizaciones de cambio con el dólar estadounidense y el euro. Los usuarios pueden comprar terrenos directamente de Linden Labs o de otros usuarios a través de subastas o a precios fijos en el mercado abierto.
Seminar on gasoline direct injection...Saran S Nair
The document discusses gasoline direct injection (GDI), which improves fuel efficiency without significantly changing conventional internal combustion engine technology. GDI involves sending pressurized fuel directly into the combustion chamber rather than mixing it with air in the intake manifold. This allows for a higher compression ratio and more precise fuel delivery. GDI provides benefits like reduced fuel consumption and emissions compared to port fuel injection systems, but also presents challenges such as increased complexity, cost, and risk of deposits. Major automakers now offer vehicles with GDI engines.
This document provides information on electronic fuel injection systems. It discusses several key topics:
1) Safety precautions that should be taken when working with fuel injection systems, such as using proper ventilation and protective equipment due to risks of burns and carbon monoxide poisoning.
2) The basic principles of electronic fuel injection, including how multi-point injection systems work with an injector located near each intake port, and how the electronic control unit pulses the injectors to regulate air-fuel ratio.
3) Terms used to classify different types of fuel injection systems, such as single-point injection, multi-point injection, continuous injection, sequential injection, and direct injection.
4) Modes of fuel injection
This document discusses multi-cylinder engines and port fuel injection systems. It describes how port fuel injection helps ensure a uniform air-fuel mixture in each cylinder by injecting the same amount of gasoline into the intake manifold. It then provides details on the components and working of port multi-point fuel injection (MPFI) systems, including electronic control systems, fuel systems, air induction systems, sensors that feed information to the engine control unit, and how this helps precisely control fuel injection.
The document discusses the basics of fuel injection systems in compression ignition (CI) engines. It outlines the key objectives of a fuel injection system which are to meter the correct amount of fuel demanded based on engine load and speed, distribute fuel equally among cylinders, inject fuel at the proper timing and rate, and ensure proper atomization. It also provides details on the typical injection timing window and angle. To achieve these objectives, the key functional components are identified as the pumping element to transport fuel, a metering element to control the fuel supply, a metering control to adjust the metering based on load/speed, and a distribution element to divide fuel evenly among cylinders. Finally, it lists some common types of fuel injection systems used in
Multi Point Fuel Injection System (MPFI) supplies the proper ratio of gasoline and air to engine cylinders without using a carburetor. It varies piston speed using advanced sensors controlled by the Engine Control Unit (ECU). MPFI systems are classified as either port injection or throttle injection based on the placement of the injectors. Port injection sprays fuel into the intake manifold near the intake ports, while throttle injection is similar to a carburetor with injectors controlling fuel mixing. The ECU primarily controls ignition timing and fuel injection quality based on sensor data. MPFI provides benefits like lower costs, higher efficiency, reduced maintenance, and higher engine power compared to carbureted systems.
The document discusses multi-point fuel injection (MPFI) systems. It begins by defining MPFI as a system that uses fuel injectors in each engine cylinder rather than a carburetor to mix fuel and air. It then explains the components of an MPFI system, including fuel injectors, fuel filters, pressure regulators, and sensors that provide input to the engine computer. The document outlines how the computer calculates the optimal fuel amount for each cylinder based on various inputs and controls the injectors accordingly. MPFI systems provide benefits like improved fuel efficiency, reduced emissions, and better engine performance compared to carbureted engines.
This document discusses various types of fuel injection systems used in automotive engines. It begins by explaining the differences between carburetors and fuel injection systems. It then describes several types of petrol injection systems including single point injection, throttle injection, port injection, and multi-point fuel injection. Direct injection systems are also discussed, along with their advantages such as better vaporization and higher efficiency. The document outlines the components and functioning of multi-point fuel injection systems controlled by an electronic control module. It concludes by listing some advantages and disadvantages of using petrol injection systems compared to carburetors.
This document discusses fuel injection systems for compression ignition (CI) engines. It describes how fuel injection systems work by using pressure, rather than engine vacuum, to feed fuel into the engine. This makes fuel injection more efficient than a carburetor. Fuel injection provides improved atomization of fuel, better fuel distribution between cylinders, smoother idle, lower emissions, better cold weather drivability, and increased engine power compared to a carburetor. The document also discusses single-point and multi-point fuel injection systems and how they differ in injecting fuel into the intake manifold or ports.
The document discusses mechanical fuel injection systems for diesel engines. It describes the key components of such a system including the fuel tank, fuel feed pump, injection pump, injectors, and filters. It then covers four main types of injection systems - individual pump and nozzle, unit injector, common rail, and distributor systems. For each system, it explains the basic configuration and operation. The document also discusses injection pumps, governors, injectors, nozzles, spray formation, and equations for determining fuel velocity and injection rate. In summary, it provides an overview of the components, classification, and functioning of mechanical fuel injection systems for diesel engines.
This document discusses multi-point fuel injection (MPFI) systems. It begins by defining MPFI as a system where fuel is injected into individual cylinders based on commands from the engine control unit (ECU). It then describes the key components of an MPFI system including the fuel tank, fuel pump, fuel filter, injectors, intake manifold, fuel lines, ECU, and sensors. The document outlines the stages of fuel injection and discusses sequential and simultaneous injection types. It concludes by explaining the advantages of MPFI systems like improved fuel delivery and throttle response compared to carbureted engines.
Fuel injection in si engine by shubham sanjay sorate ph.no.84215922248421592224
This document discusses different types of fuel injection systems used in gasoline engines, including carburetor port injection (MPFI), direct injection (GDI), and throttle and port injection. It provides details on the advantages of fuel injection over carburetors, such as more precise fuel metering and better integration with engine control systems. The document also explains the differences between indirect injection which injects fuel before the combustion chamber, and direct injection which injects fuel directly into the chamber. It compares various fuel injection systems and discusses their working and advantages.
This document discusses the components and functions of an engine management system. It describes the key elements like the fuel system, airflow system, ignition, injection and sensors that are controlled by the Engine Control Unit (ECU). It also explains different modes of electronic fuel injection and how feedback from sensors is used for closed loop fuel control. Cold start systems and variable intake manifolds are covered as well.
1) The document describes a study investigating the effects of variable intake plenum length on the performance of a spark-ignition engine with electronically controlled fuel injectors.
2) Engine tests were conducted with additional plenum lengths of 16mm, 32mm, 48mm, and 64mm added to the original intake manifold.
3) The results showed that a 32mm plenum extension improved engine thermal efficiency, especially at lower engine speeds up to 3000rpm, while also reducing fuel consumption at high loads and low speeds.
This document discusses various components and operation of electronic fuel injection systems. It describes the purpose and function of components like the fuel injectors, fuel pressure regulator, idle air control valve, and stepper motor. It also explains the different modes of operation for fuel injection systems including starting, open-loop, closed-loop, and modes for acceleration, deceleration, and idle control.
The document provides details about a seminar report on multi-point fuel injection systems. It discusses the main components of an MPFI system including the air intake system, fuel delivery system, and electronic control system. Sensors used in MPFI systems are described such as the manifold absolute pressure sensor, throttle position sensor, oxygen sensor, intake air temperature sensor, engine coolant temperature sensor, and vehicle speed sensor. Advantages of MPFI systems are more uniform air-fuel mixtures, improved fuel efficiency and emissions, and immediate acceleration response due to electronic control.
The document discusses the gasoline direct injection (GDI) system. It describes the main components of the system including sensors that detect engine conditions, an engine control unit that controls the system based on sensor signals, and actuators that operate under ECU control. The ECU performs functions like fuel injection control, idle speed control, and ignition timing control. It also has self-diagnosis capabilities to assist with troubleshooting.
This document discusses the history and components of gasoline injection systems. It begins by explaining why gasoline injection replaced carburetors, noting improvements in efficiency, power, and fuel economy. It then describes the main types of injection systems and their components, including direct injection, port injection, throttle body injection, and multi-point fuel injection. The document outlines the sensors, electronics, and timing involved in electronic fuel injection systems and concludes by comparing the performance of different fuel types with varying injection parameters.
This document discusses multipoint fuel injection (MPFI) systems for gasoline engines. It describes two types of MPFI systems - port injection and throttle injection. In port injection, fuel injectors are placed in the intake manifold near the intake ports to spray fuel into the incoming air before it enters the cylinders. In throttle injection, the system is similar to a carburetor with a throttle valve controlling air intake and sensors controlling fuel mixing. The document outlines the four main components of an MPFI system - the air intake, fuel delivery, electronic control, and emission control systems. It provides details on various sensors used in the electronic control system like throttle position, manifold pressure, engine temperature, oxygen, and vehicle speed sensors. Advantages
The document discusses electronic fuel injection systems used in modern vehicles. It lists group members and contents, then provides an introduction to electronic fuel injection. It describes the main components of the system, including air induction sensors that provide inputs to the electronic control unit (ECU). The ECU then controls various output actuators like fuel injectors. The document outlines different fuel injection types and discusses each component in more detail. It concludes by listing some advantages of electronic fuel injection over conventional carbureted systems.
This document appears to be an email in Spanish from someone named Camille Automatico, but the content is unclear as it only contains their name and email address with no other text.
Según las estadísticas de Second Life, hay 18.000 islas privadas y 3.400 parcelas de tierra principal con un total de 1.429 km2, y las transacciones económicas en Linden dólares siguen las cotizaciones de cambio con el dólar estadounidense y el euro. Los usuarios pueden comprar terrenos directamente de Linden Labs o de otros usuarios a través de subastas o a precios fijos en el mercado abierto.
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Pink magic is a mysterious phenomenon that some claim to have experienced. However, there are no scientific studies that have been able to prove or explain the reported experiences of pink magic. The nature and existence of pink magic remains undefined and unsubstantiated.
Test Scheduling of Core Based SOC Using Greedy AlgorithmIJERA Editor
Escalating increase in the level of integration has led the design engineers to embed the pre-design and pre-verified logic blocks on chip to make a complete system on chip (SoC) technology. This advancing technology trend has led to new challenges for the design and test engineers. To ensure the testability of the entire system, the test planning needs to be done during design phase. To save the test cost, the test application time needs to be reduced which requires the test to be done concurrently. However the parallel running of test of multiple cores increases the power dissipation. This thereby leads to make test optimization to take care of time and power. This paper presents an approach for the scheduling the cores with the test time, power, test access mechanism and bandwidth constraint based on greedy algorithm. The TAM allotment to the various cores is done dynamically to save the test time and utilize the full bandwidth. Scheduling is done on ITC’02 benchmark circuits. Experiments on these ITC’02 benchmark circuits show that this algorithm offers lower test application time compared to the multiple constraint driven system-on-chip.
Este documento describe a Fray Luis Amigó como un visionario y profeta de la pedagogía humanista cristiana. Aunque nunca se dedicó formalmente a la pedagogía, sus acciones basadas en el amor misericordioso de Jesucristo y pasajes del Evangelio establecieron las bases para los procesos de formación de los Terciarios Capuchinos. Fundó esta congregación con el objetivo de educar a jóvenes descarriados del camino de la verdad y el bien. Esto marcó el rumbo hacia una pedagogía centrada en
Study and Analysis of Six Stroke EngineIJERA Editor
Six Stroke engine, the name itself indicates a cycle of six strokes out of which two are useful power strokes. According to its mechanical design, the six-stroke engine with external and internal combustion and double flow is similar to the actual internal reciprocating combustion engine. However, it differentiates itself entirely, due to its thermodynamic cycle and a modified cylinder head with two supplementary chambers: combustion and an air heating chamber, both independent from the cylinder. In this the cylinder and the combustion chamber are separated which gives more freedom for design analysis. In addition to the two valves in the four stroke engine two more valves are incorporated which are operated by a piston arrangement. The Six Stroke is thermodynamically more efficient because the change in volume of the power stroke is greater than the intake stroke and the compression stroke. The main advantages of six stroke engine includes reduction in fuel consumption by 40%, two power strokes in the six stroke cycle, dramatic reduction in pollution, adaptability to multi fuel operation. Six stroke engine’s adoption by the automobile industry would have a tremendous impact on the environment and world economy .
Este documento describe el concepto de compra apalancada de empresas (LBO) y analiza sus características principales. Explica que un LBO involucra la compra de una empresa financiando una parte importante con deuda, lo que aumenta su apalancamiento financiero. Luego detalla los componentes y proceso de un LBO, la información requerida por prestamistas y vendedores, y diferentes estructuras de capital que pueden utilizarse, incluyendo deuda principal, acciones preferidas y deuda de entresuelo. Finalmente, compara métodos para calcular
The document provides a list of notable landmarks and places of interest in and around the city of Erzurum, Turkey. It lists historical sites like the Yakutiye Madrasa, The Madrasa with Twin Minarets, and The Three Tombs. It also mentions natural attractions such as the Seven Lakes, Lake Tortum, and Tortum Waterfall. Additionally, it lists cultural attractions, including the Çobandere Bridge, Osk Vank Monastery, Hasankale Thermal Springs, and the Atatürk House Museum.
Data Security with Colors using RSA technique that integrates the RGB Color model with the well-known public key cryptographic algorithm RSA (Rivest, Shamir and Adleman). This model provides both confidentiality and authentication to the data sent across the network. RSA algorithm uses public key and private key to encrypt and decrypt the data and thus provides confidentiality. But the public key is known to everyone and so anyone can encrypt the data and send the message. Hence authentication of users is needed. In this technique we use RGB color model to provide authentication. Every user will have a unique color assigned to him. A sender must know the receiver’s color to send a message. The color value is encrypted using a key which is used as a password while decrypting the message. To decrypt the message, the receiver must provide his color values. If the decrypted color values and his color values are equal then the sender and receiver are send to be authentic. The data encryption and decryption follows RSA procedure. Thus both authentication and confidentiality are provided for the data.
Wonder Woman is a superhero known for her strength, courage and compassion. She fights for justice and equality using her Lasso of Truth and indestructible bracelets. Diana Prince comes from the hidden island of Themyscira and is the daughter of Queen Hippolyta.
The presentation Amir Belferman, Amidar CIO, presented at IBM Software Forum February 26. Some links: http://dvirreznik.blogspot.com/2009/02/ibm-software-forum-summary.html and http://dvirreznik.blogspot.com/2009/02/ibm-software-forum-is-tomorrow-lotus.html
This document is a CD-ROM containing information about Hellenic ornamental motifs. It includes sections on Cycladic, Minoan, Mycenaean, Geometric, Classical, Hellenic, Byzantine, and Folk art motifs. It provides illustrations and descriptions of motifs from each period and culture. It was produced by the Hellenic Organization of Small and Medium-Sized Enterprises and Handicrafts (HOSMEH) with funding from the European Commission.
Este documento presenta una unidad didáctica de 8 sesiones sobre números decimales para alumnos de 5o grado. Los objetivos son leer, escribir, comparar y ordenar números decimales, así como aproximarlos y usarlos para expresar cantidades de dinero. El contenido incluye décimas, centésimas y milésimas, con actividades en libros de texto y en línea. La evaluación es continua a través de observación y producciones de los alumnos. Se proporcionan adaptaciones para alumnos con necesidades especiales.
La electricidad proviene de fuentes naturales como el ámbar y puede generarse a través de procesos como la fricción, como descubrió William Gilbert. Tales de Mileto fue uno de los primeros en estudiar la electricidad estática generada por el ámbar amarillo.
MODERN DEVELOPMENT IN SUCTION PROCESS OF IC ENGINESgautam472
This review paper deals with the evolution of the general processes employed in the suction process of IC Engines. The suction process has evolved from the traditional use of carburettors to much more sophisticated systems like CRDi, MPFi, etc. used in modern days. In doing so, various parameters such as the volumetric efficiency and the turbulence, etc. inside the engine have to be considered. Additional processes such as supercharging and turbocharging are employed to improve these parameters. It is also highly desirable to vary the Air-Fuel ratio effectively according to the speed of the engine for better power output and mileage. Thus researchers have developed several ways over the years to achieve it. Recent research work being carried out in this field is in the areas of Pressure Wave Superchargers, Variable Geometry Turbochargers, Multiple Intake valves, Shrouded Intake Valves, Camless Engines etc. Many of these technologies have been employed in the industry such as the DTS-Si, TDi&i-vtec Engines.
IRJET- Design and Analysis of Multi Port Fuel Injection CNG Engine Manifo...IRJET Journal
This document describes the design and analysis of a multi-port fuel injection compressed natural gas (CNG) engine intake manifold system. The authors designed the manifold using pressure wave tuning theory to determine the optimal runner lengths. Computational fluid dynamics analysis was performed to evaluate the uniformity of the air-fuel mixture distribution and velocity profiles within the manifold. One-dimensional engine simulations were conducted to compare the performance of the new multi-port fuel injection system to the existing single-port system, finding that the multi-port system provided slightly higher power, torque, and volumetric efficiency.
This document provides details about a student project on a multipoint fuel injection system. It includes sections on introduction, components of the MPFI system, working of the system, and sensors used. The project was completed by three students and guided by a professor at Shree Samarth Polytechnic to fulfill requirements for a diploma in mechanical engineering from the Maharashtra State Board of Technical Education.
An Analysis of Effect of Variable Compression Ratio in C.I. Engine Using Turb...IRJET Journal
1) The document analyzes the effect of variable compression ratio in a single cylinder diesel engine using a turbocharger.
2) A turbocharger increases engine efficiency and performance by boosting the intake air pressure. This allows more air and fuel to enter the cylinders to increase power.
3) The study varies the compression ratio from 12.1 to 18.1 and analyzes the impact on performance parameters like brake power, specific fuel consumption, thermal efficiency at different loads.
The turbocharger improves engine performance by recycling exhaust energy to compress the intake air, allowing more fuel to be burned in each cylinder. Varying the compression ratio provides an opportunity to optimize these parameters.
IRJET - Recent Trends in Internal Combustion EngineIRJET Journal
This document discusses recent trends in internal combustion engines. It begins with an overview of internal combustion engines, noting their intermittent combustion and use of the combustion products as the working medium. It then discusses some key trends, including increased use of direct injection, variable valve timing, turbocharging and hybrid electric powertrains. The document outlines several common fuel injection systems like multi-point fuel injection and common rail direct injection. It discusses how these technologies improve power, efficiency and emissions. In summary, the document provides an overview of internal combustion engine technology and discusses trends toward more efficient systems incorporating technologies like direct injection and hybridization.
Numerical Simulation of Steady Flow through Engine Intake System Using CFDIOSR Journals
This document summarizes a study that used computational fluid dynamics (CFD) to simulate and analyze steady flow through an engine intake system. A 3D model of the intake manifold and port system was analyzed using FLUENT software. The model was validated by comparing CFD results to experimental data. Good agreement was found between predicted and measured airflow rates. The CFD model can be used as a tool to optimize the intake system design and reduce the need for physical experiments.
This document summarizes a study that used computational fluid dynamics (CFD) to simulate and analyze steady flow through an engine intake system. A 3D model of the intake manifold and port system was analyzed using FLUENT software. The model was validated by comparing CFD results to experimental data. Good agreement was found between predicted and measured airflow rates. The CFD model can be used as a tool to optimize the intake system design and reduce the need for physical experiments.
This document discusses the differences between carbureted and fuel injected motorcycle engines. It explains how carburetors and fuel injection systems work, as well as the benefits of fuel injection such as improved fuel efficiency and emissions. It also discusses how more motorcycle manufacturers are switching to fuel injection systems to meet emissions regulations, and how the aftermarket industry and mechanic training is adapting to this transition.
Experimental Evaluation of Electronic Port Fuel Injection System in Four Stro...IJTET Journal
In Today’s life, the two wheelers is best friend to us because wherever we gowe take it with us. And therefore we are all
looking for higher performance and lower emission engines. And now a day, engines are using only carburetor for mixing of fuel and
air. So these engines suffer lower operating efficiency, higher fuel consumption and produce higher level of harmful emission. So to
overcome this problem,Electronic port fuel injection system is introduced. In this system the fuel injector injects fuel in accordance to
need of engine which is measured by the various sensors like speed sensor, crank angle sensor, Lambda sensorand throttle body
sensor, etc. And here Electronic Port Fuel Injection System for Four Stroke 125cc SI engine was designed and the Experimental
Evaluation had made to investigate the performance parameters and emission parameters of the engine.
The document discusses electronic fuel injection systems. It provides an introduction and overview of the history and components of fuel injection systems. These include the electronic control unit, sensors, actuators, fuel injectors, fuel rail, and fuel pressure regulator. The document then describes how the fuel injection system and injectors work, the injector firing process, and testing and cleaning of injectors. It also discusses different fuel injection types and the advantages and disadvantages of electronic fuel injection systems.
Analysis of-change-in-intake-manifold-length-and-development-of-variable-inta...Mohit Soni
This document summarizes a research paper that analyzed the effects of changing the length of an intake manifold on engine performance. The paper investigated how varying the length of the intake runner in a single-cylinder spark-ignited engine affected brake torque, brake power, brake mean effective pressure, and specific fuel consumption. Simulation software was used to evaluate these parameters at different intake lengths. The simulations found that changing the runner length considerably affected the RPM at which peak torque was obtained. Accordingly, the researchers designed and developed a system to adjust the manifold length using a reciprocating mechanism controlled by a microcontroller and hall effect sensor.
The document discusses gas exchange processes in internal combustion engines. It covers topics like supercharging, turbocharging, scavenging processes, compressors, turbines, and factors that influence the residual gas fraction. It provides details on different scavenging configurations for 2-stroke engines and the intake and exhaust processes in a 4-stroke engine. Diagrams are included to illustrate the various concepts.
A Comparative CFD Analysis for Air Swirl on Conventional Valve and Modified V...IRJET Journal
1) The document compares the air swirl in a conventional diesel engine valve and a modified valve with skirting using computational fluid dynamics (CFD) analysis.
2) Two engine models are considered - one with a conventional valve and another with a valve that includes added skirting.
3) The CFD analysis finds that the modified valve with skirting produces slightly higher air velocities near the skirting, which leads to increased swirl and turbulence in the cylinder, improving air-fuel mixing compared to the conventional valve design.
This document provides an overview of transonic combustion in internal combustion engines. It discusses how transonic combustion uses supercritical fuel injection to improve engine efficiency and reduce emissions. Key aspects covered include using an electric fuel pump to inject heated fuel above its critical point for rapid mixing and combustion. This allows independent control of air-fuel ratio and a 50% increase in efficiency. The system aims to eliminate engine losses and exhaust emissions through more complete fuel combustion. While costly to implement, transonic combustion could significantly improve fuel economy and reduce vehicle emissions.
This document discusses the evolution of fuel induction systems for spark ignition engines from carburetors to various fuel injection systems. It covers the need for fuel injection to achieve better combustion and control through more uniform fuel distribution. Early fuel injection systems included single-point injection. The document discusses spray formation, factors influencing droplet size, and simplified evaporation models. It also covers the development of mechanical and electronic fuel injection systems, including multi-point fuel injection and those using speed-density or airflow metering for fuel calculation and injection timing.
An analysis of effect of variable compression ratio in C.I. engine using turb...IRJET Journal
This document analyzes the effect of variable compression ratio in a turbocharged diesel engine. It discusses using a single cylinder diesel engine to test performance at different loads and compression ratios ranging from 12.1 to 18.1. The turbocharger is used to increase engine efficiency and performance by boosting intake air pressure. Theoretical calculations of parameters like brake power, fuel consumption, thermal efficiency are presented. Results show that increasing the compression ratio and intake boost pressure improves brake thermal efficiency. It was concluded that a variable compression ratio concept can improve engine performance and efficiency while reducing emissions.
Air Compression and Electricity Generation by Using Speed Breaker with Rack A...IJMER
On roads, speed breakers provided to control the speed of traffic in rushed areas. The
potential energy in terms of weight of vehicle is loss on speed breaker can be utilized for useful
purposes. This paper describes the potential energy of such type of energy available on roads and its
utilization for useful work. The stages of development of a speed breaker device are described and the
mechanism to generate electricity using rack, pinion and speed increasing gear box and generator
and store compressed air with the help of piston cylinder compressor arrangement. Whenever the
vehicle is allowed to pass over the speed breaker dome, it gets pressed downwards. As the springs are
attached to the dome, they get compressed and the rack, which is attached to the bottom of the dome,
moves down in reciprocating motion. Since rack has teeth connected to pinion there is conversion of
reciprocating motion of rack in to rotary motion of pinion, but the two gears rotate in opposite
direction. So that shafts will rotate with certain RPM these shafts are connected through a belt drive
to the generators, which converts the mechanical energy into electrical energy. The rack is attached
to piston rod of cylinder so downward stroke of rack we can use for air compression in reservoir, with
help of piston cylinder arrangement. Simultaneously reciprocating piston cylinder arrangement
compresses the air and stores it in the reservoir. We can use the generated electricity and compressed
air for different purpose
The document describes a compressed air engine that uses compressed air as fuel instead of gasoline or diesel. The engine utilizes a compressor to provide compressed air, a programmable logic controller (PLC) to control solenoid valves that regulate air flow, and a heating element to increase the pressure and power output of the expanded air driving the pistons. An experimental system was built to test the output power and efficiency of the compressed air engine operated by the PLC system.
A basic guide to Automotive Engineering. A must have for Automobile/Mechanical Engineers.
Includes all technologies like - Traction control, ABS, etc
CONTENTS:
1. Car body construction
2. Engines
3. Fuel Supply in Petrol & Diesel Engines
4. Engine related systems
5. Drive Train
6. Suspension & steering
7. For safety
8. Emissions
9. Electrical & HVAC systems
ENGINE AUXILIARY SYSTEMS
Electronically controlled gasoline injection system for SI engines, Electronically controlled diesel injection system (Unit injector system, Rotary distributor type and common rail direct injection system), Electronic ignition system (Transistorized coil ignition system, capacitive discharge ignition system), Turbo chargers (WGT, VGT), Engine emission control by three way catalytic converter system, Emission norms (Euro and BS).
Similar to Review of theModern developments in Suction processes of IC Engines (20)
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Review of theModern developments in Suction processes of IC Engines
1. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 4), September 2014, pp.27-36
www.ijera.com 27 | P a g e
Review of theModern developments in Suction processes of IC Engines
Dhruv Chawda1, Subhajit Dey2, K.Krishnamurthy3 1Student, 2Student, 3Professor, Manipal Institute of Technology, Karnataka, India
Abstract This review paper deals with the evolution of the general processes employed in the suction process of IC Engines. The suction process has evolved from the traditional use of carburettors to much more sophisticated systems like CRDi, MPFi, etc. used in modern days. In doing so, various parameters such as the volumetric efficiency and the turbulence, etc. inside the engine have to be considered. Additional processes such as supercharging and turbocharging are employed to improve these parameters. It is also highly desirable to vary the Air-Fuel ratio effectively according to the speed of the engine for better power output and mileage. Thus researchers have developed several ways over the years to achieve it. Recent research work being carried out in this field is in the areas of Pressure Wave Superchargers, Variable Geometry Turbochargers, Multiple Intake valves, Shrouded Intake Valves, Camless Engines etc. Many of these technologies have been employed in the industry such as the DTS-Si, TDi&i-vtec Engines. Thus, the Automobile Industry has come a long way in evolving the intake processes and further developments will always be on the way.
Keywords: Volumetric efficiency, Turbulence, Swirl, Carburettor, Fuel Injector, Supercharger, Turbocharger.
I. Introduction
The suction process is one of the most basic and yet one of the most important processes in IC Engines. Hence there has been continuous improvement in it over the years. This review paper deals with the evolution of the suction process from the traditional Carburettors to the modern advanced Injection systems. As the process of admitting the charge into the cylinder is completely different for SI and CI engines, i.e. in SI engines Air and Fuel are first Premixed inside the carburettor or the intake manifold and then injected into the cylinder whereas in CI engines Air is alone first taken into the cylinder and compressed and then near the end of the compression process the fuel is injected, hence these two processes have been dealt with separately. But the factors which are to be considered for the suction process remain more or less the same and hence have been accounted for together. At the end the modern developments and processes currently employed in the industry have been discussed.
II. Factors Affecting the Suction Process
2.1 Volumetric Efficiency Volumetric Efficiency is basically the ratio of amount of air inducted into the cylinder to the stroke volume of the cylinder.Volumetric efficiency varies with engine speeds but it is desirable to obtain maximum volumetric efficiency at the intake of any engine. At a certain speed volumetric efficiency is maximum, decreasing at both higher and lower
engine speeds. The relation between the volumetric efficiency and the parameters governing it is in general given by: ƞv = 2ma/(ρa,0VdN) where, ƞv = volumetric efficiency ma = mass flow rate of air ρa,0 = density of air Vd = displaced cylinder volume (stroke volume) N = engine speed in rpm There are various parameters governing the volumetric efficiency which is mentioned below:
Fuel
Heat Transfer
Valve Overlap
Fluid Friction losses
Choked Flow
Closing intake valve after BDC
Intake tuning
Exhaust residual
2.2 Turbulence Higher turbulence increases the real time rate of fuel evaporation, mixing of the fuel vapour and air and combustion. Thus, higher turbulence is beneficial for an engine cycle.
RESEARCH ARTICLE OPEN ACCESS
2. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 28 | P a g e
2.3 Air Fuel Ratio Air–fuel ratio(AFR) is the mass ratio of air to fuel present in an internal combustion engine. It is highly desirable to vary the air-fuel ratio according to the load on the engine for better fuel efficiency and mileage. But supplying the correct air-fuel ratio for a given speed is a big challenge.
III. Fuel Induction Systems in SI Engines
3.1 Carburettors Carburettors are the most primitive type of fuel induction system used. The structure of a carburettor is as shown in the figure. But due to various problems encountered in this system of fuel induction, carburettors are obsolete in modern vehicles and new technologies like MPFi have been adopted.
Fig 1-Basic construction of a carburettor 3.2 Fuel Injectors Fuel Injectors are nozzles that inject a spray of fuel into the intake air.They are electronically or mechanically controlled.A metered amount of fuel is trapped in the nozzle end of the injector at high pressure and is injected into the surrounding air at the proper time.To inject the exact amount of fuel at the right time and as tiny droplets for better mixing and evaporation to occur a variety of fuel injection systems have been evolved, some of them are as follows. 3.2.1 Electronic fuel injection systems (EFIs) The above fuel injection systems were mechanical and used complex designs and weighed heavier. They have now been replaced by electronic injection systems. 3.2.2 Single-Point Throttle Body Injection
In this system an electronically controlled injector meters the fuel and injects it into the air flow directly above the throttle body.The injector meters the fuel in response to calibration of air flow based on intake manifold pressure,air temperature and engine speed.The main problem with this type of injection system is obtaining equal distribution of fuel to all cylinders and the fuel particles have a tendency to deposit on the walls of the manifold when cold. 3.2.3 Multi-Point Port Injection (MPFi) In this system the fuel is injected into the intake port of each cylinder just before the inlet valve.It requires one or more injectors per cylinder.The advantages of this system are improved power and torque through improved volumetric efficiency and more uniform fuel distribution to each cylinder and rapid response to the changes in the throttle position and hence an appreciable fuel economy. There are basically 2 types of MPFi systems. 3.2.3(a) D-Jetronic EFI System This was the first generation of EFI developed at BOSCH. Here the „D‟ stands for „Druck‟ which means pressure. The name is derived from the fact that one of the main input signals is the intake manifold pressure. As shown in the fig. An electrically driven fuel pump delivers the fuel through a filter to the fuel line.The pressure regulator maintains the pressure in the line at a fixed value(around 2.7 bars).The control unit receives the main input signals from the pressure sensors connected to the intake manifold and receives the speed information from the distributor and thus meters out the required quantity to the injectors.
Fig 2- D-Jetronic EFI system 3.2.3(b) L-Jetronic EFI system
This is the second generation EFI system developed at BOSCH. It uses the air-flow rate as one of the basic input signals. Its name is due to the fact that L stands for „Luftmengenmessung‟ which means air flow measurement. As shown in the fig. the fuel
3. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 29 | P a g e
loop is basically the same as in D-Jetronic system,except that the pressure regulator is connected through a hose to the intake manifold. Thus the fuel pressure is a function of the manifold pressure. The air flow rate is measured by the air flow meter whose movable measuring plate is opened by the air stream against the force of a spring. The position of the measuring plate is sensed by a potentiometer. Its voltage represents the airflow rate, and is one of the main input signals going into the Engine control unit(ECU).
Fig 3-L-Jetronic EFI system with multi-point port fuel injection
IV. Fuel Injection systems in CI Engines
4.1 Individual Pump System As shown in the fig. Each cylinder is provided with one pump and one Injector. The high pressure pump plunger is actuated by a cam and produces the fuel pressure necessary to open the spring -loaded injector valve at the correct time. This valve is a hydraulically operated automatic plunger valve i.e. no mechanism is required to operate it. The amount of fuel injected depends upon the effective stroke of the plunger. The fuel pump in this system is of reciprocating type and is always accompanied by a jerking noise and is therefore called a jerk pump.
Fig.4- Individual pump system.
4.2 Common Rail Direct Injection Systems(CRDi)
The CRDi is the most recent and commonly used injection system in CI engines. The fig shows the schematic diagram of a CRDi system. In it, the fuel from the fuel storage tank is drawn through the primary fuel filters by a low pressure fuel feed pump. The discharge from this pump enters the high pressure fuel injection pump. This pump serves only to deliver the fuel under high pressure to a common rail, called the header, with the pressure held constant by a pressure regulating valve. The high pressure in the header forces the fuel to each of the nozzles located in the cylinders. At the proper time, a mechanically operated valve by means of a push rod and a rocker arm allows the fuel to enter into the cylinder through the nozzle. The amount of fuel supplied to the combustion chamber is regulated by varying the length of the push rod stroke. A very big advantage of the common rail system is that it is self-governing. If the engine speed falls, an increased quantity of fuel is automatically injected, since the time taken for the same crank angle rotation, during which the fuel is supplied, is increased and as the fuel pressure is maintained constant, with increased time, the fuel supply will also be increased. The disadvantages of the CRDi system are that Very accurate design and workmanship are required in this type of fuel –injection mechanism. The lift of the valve is very small and hence it requires absolute rigidity of the operating mechanism and freedom from vibration and temperature effects and negligible wear.
Fig 5- Common Rail Direct Injection System (CRDi)
V. Modern Developments in IC Engines
5.1 Superchargers
Superchargers and turbochargers are compressors mounted in the intake system and used
4. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 30 | P a g e
to raise the pressure of the incoming air. This results in an increased volumetric efficiency and hence higher power output. Superchargers are mechanically driven directly off the engine crank shaft. They are generally positive displacement machines running at the same speed as the engine. The power to drive the compressor is a parasitic load on the engine output and hence this is one of the major disadvantages compared to a turbocharger. Other disadvantages include greater weight, higher cost and noise. A major advantage of superchargers over turbochargers is very quick response to throttle changes. Wse= ma(hout- hin) = macp(Tout - Tin) where: Wse= power needed to drive the supercharger ma= mass flow rate of air into the engine cp= specific heat of air h = specific enthalpy T = temperature This assumes that the compressor heat transfer, kinetic energy terms, and potential energy terms are negligibly small, true for most compressors. All compressorshave isentropic efficiencies less than 100%, so the actual power needed will be greater than the ideal. In Fig. 6, process 1-2srepresents ideal isentropic compression,while process 1-2Ais the actual process with an increase in entropy. The isentropic efficiency ƞsof the supercharger compressor is:
Fig 6- Ideal flow process (1-2s) and actual flow process (1-2A) through supercharger or turbocharger compressor (ƞs)sc = Wisen/Wact= [ma(h2s - h1)]/[ma(h2A– h1)] = [macp(T2s– T1)]/[macp(T2A– T1)] = (T2s – T1)/(T2A–T1) If the inlet temperature and pressure are known as well as the designed outputpressure, the ideal gas isentropic relationship can be used to find T2s: T2s= T1(P2/P1)(k-l)/k The actual outlet temperature T2Acan then be calculated from Eq. (5-14) if the isentropic efficiency is known. When using Eq. (5-15), a value of k = 1.40 shouldbe used because of the lower temperature at this point.
There is also a mechanical efficiency of less than 100% between the power taken from the engine and what is delivered to the compressor:
ƞm= (Wact)sc/Wfrom engine
Thus the supercharger also raises the inlet air temperature by compressive heating as shown in the above equations and hence increases self-ignition and knocking problems in SI engines as al other temperatures will be high. Thus to avoid this many superchargers are equipped with an after cooler to cool the compressed air back to a lower temperature. However there is no such concern about knock problems in CI engines. 5.2 Pressure wave Superchargers(Comprex)
Fig 7- Working of a Comprex Supercharger Officially called the Pressure Wave Supercharger, a Comprex is basically a stationary drum casing with a lost-wax cast straight-vane rotor spinning inside the drum, creating boost. Think of it as a wide water wheel inside a drum. Like a turbo, the casing and rotor aren't in contact, but the clearance between the two is kept to a minimum (barring thermal expansion and creep) to prevent boost leakage. The synchronized belt-driven rotor is powered by the crank, moving around four to five times faster than the engine, but only drawing enough to overcome the frictional losses of the assembly. This means the Comprex doesn't suck power away from the engine to do the work of compression. The compression is done by the exhaust gases like a turbo, which is essentially free energy.
In pressure wave supercharging the power of the engine is not used to compress air like a simple supercharger and neither is it compressed by driving the rotating assembly with exhaust gases like a turbo.
5. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 31 | P a g e
This is where the 'pressure wave' portion of the name comes in. Incoming ambient air is compressed by using the pressure wave from the exhaust gas. Each end of the drum has two different-sized ports, connected by ducts for air or exhaust gas to enter and exit. On one side of the drum, air enters from the intake at near-ambient pressure and exits at boost pressure to the intake manifold, while on the other side, exhaust gas from the exhaust manifold enters at high pressure and exits to the tailpipe at lower pressures. How compression is done is the hard part to explain.
Fig 8- Schematic diagram of a Comprex Supercharger The process starts as a given channel on the rotor already filled with ambient intake air. Neither end of this channel is lined up with a port, so it's completely sealed off by each end of the drum. As the drum rotates, the port on the right side, a smaller high- pressure exhaust orifice, is exposed first to let in the just-combusted gases, which introduces a compression or shock wave into the channel. The shock wave propagates at the localized speed of sound and pushes fresh air against the left wall of the drum, which is still closed and thus compressing the charge. These compression waves are not on account of the individual pulses of each cylinder firing, just the rapid introduction of two gases at different pressures. As the charge compresses, it makes space, allowing the exhaust gas to enter the channel. Since the shock wave is traveling so fast, the two gases never mix. By this point, the channel has rotated to the high- pressure air port leading to the intake manifold. Although rated for the same mass flow rate, the smaller port is sized so that the compressed air exits at a much lower velocity. This deceleration of the compressed air causes a secondary shock wave to propagate toward the right (or exhaust) side, which compresses the fresh air further. This way, the boosted air going into the engine is actually at a higher pressure than the exhaust gases.
As this secondary compression wave reaches the right side of the drum, the high-pressure gas port closes, causing the compression wave to reflect back as an expansion wave, pushing most of the compressed air out and closing that port. By now, the low-pressure exhaust port on the right is exposed, letting the now slightly pressurized exhaust out into the tailpipe. This causes another series of expansion and compression waves that ultimately help pull in and completely fill the channel with fresh air, which brings us back to step one. In its basic form, the Comprex only works well under specific conditions, because the speed of the compression waves depend on EGT (exhaust gas temperature), which fluctuates with torque and not engine speed. To stretch out the operating range to that of most engines, specially designed pockets are added to the intake and exhaust sides of the drum to compensate for the varying range of EGT and thus the wave propagation speed. Boost pressure is controlled by a conventional wastegate on the high- pressure exhaust duct. The main advantage of the Comprex is the combined effect of response and efficiency. Since these pressure waves travel at the speed of sound, any change in load will cause an instant reaction in boost. Unlike a turbo, which has to wait for the compressor wheel to spin up to speed, it can also achieve apparent compressor efficiencies of up to 75 percent, compared to 60 percent seen in the best positive displacement compressors. The Comprex also turns much slower than a conventional turbo, meaning reduced loads on the rotor. Comprex has not been able to completely replace Turbos mainly because of packaging. The Comprex cannot be bolted onto a manifold and thrown piping at. Also, the rotor, drum and port dimensions all need to be tailored specifically for a given engine. Another concern is materials. The Comprex is widely used on diesel applications because of the lower EGTs. Making the Comprex tolerate higher EGTs from a gasoline engine is only now becoming affordable and practical. Flow reversal for the exhaust may also be an issue, although newer cross- flow and radial Comprex superchargers exist for industrial applications.
6. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 32 | P a g e
5.3 Turbochargers
Fig 9- Schematic representation of a Turbocharger
The Compressor of a Turbocharger is powered
by a turbine mounted in the exhaust flow of the
engine.The advantage of this is that none of the
engine shaft output is used to drive the compressor
and only the waste energy in the exhaust is used.
Since the maximum pressure in an engine exhaust
system is only very little above the atmospheric,so
there can only be a very small pressure drop across
the turbine. Because of this it is necessary to run the
turbine at very high speeds so that enough power is
produced to run the compressor and speeds of around
100,000 to 130.000 are common. These high speeds
and the fact that the exhaust gas is a hot, corrosive
environment demands special materials and concern
for long term reliability.
A disadvantage of turbochargers is turbo lag, which
occurs with a sudden throttle change. When the
throttle is quickly opened to accelerate an
automobile,the turbocharger will not respond quite as
quickly as a supercharger. It takes several engine
revolutions to change the exhaust flow rate and to
speed up the rotor of the turbine. Turbo lag has been
greatly reduced by using lightweight ceramic rotors
that can withstand the high temperatures and that
have very little mass inertia. Turbo lag can also be
reduced by using a smaller intake manifold.
Most turbochargers, like superchargers, are equipped
with an aftercooler to again lower the compressed air
temperature. Many also have a bypass that allowsthe
exhaust gases to be routed around the turbocharger
when an inlet air pressure boost is not needed.Radial
flow centrifugal compressors, turning at high speed,
are generally used on automobile-size engines. On
very large engines, axial flow compressors are
usedbecause of their greater efficiency at the higher
air flow rates. The value of the overall efficiency of a
turbocharger ranges from 70 to 90%.
5.4 Variable Geometry Turbochargers
Variable Turbine Technology is the next
generation in Turbocharger technology where the
turbo uses variable vanes to control the exhaust flow
against the turbine blades. The problem with normal
Turbochargers is that big turbos do not run well at
slow engine speeds, while small turbos are fast to
spool but run out of steam pretty quickly. Hence a
VTG turbo was developed to solve this problem.
A Variable Turbine Geometry turbocharger is also
known as a variable geometry turbocharger
(VGT), or a Variable Nozzle Turbine (VNT). A
turbocharger equipped with Variable Turbine
Geometry has little movable vanes which can direct
exhaust flow onto the turbine blades. The vane
angles are adjusted via an actuator. The angle of the
vanes vary throughout the engine RPM range to
optimize turbine behaviour.
Fig 10- 3-D illustration of a Variable Blade
Geometry Turbocharger
In the 3D illustration above, it can be seen that the
vanes are in an angle which is almost closed. The
variable vanes have been highlighted to distinguish
them. This position is optimized for low engine RPM
speeds, pre-boost.
Fig 11-Cut-through diagram with the variable vanes
almost closed
In the above cut-through diagram, the direction
of exhaust flow is shown when the variable vanes are
in an almost closed angle. The narrow passage of
7. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 33 | P a g e
which the exhaust gas has to flow through accelerates the exhaust gas towards the turbine blades, making them spin faster. The angle of the vanes also directs the gas to hit the blades at the proper angle. Fig 12- Cut-through diagram with the variable blades completely open This cut-through diagram shows the exhaust gas flow when the variable turbine vanes are fully open. The high exhaust flow at high engine speeds are fully directed onto the turbine blades by the variable vanes. Variable Turbine Geometry has been used extensively in turbodiesel engines since the 1990s, but it has never been on a production petrol turbocharged car before until the new Type 1997 Porsche 911 Turbo. This is because petrol engine exhaust gases are alot hotter than diesel engine exhaust gas, so generally the material used to make VTG turbos could not stand this heat. The 1997 911 Turbo uses a BorgWarner VTG turbocharger which uses special materials derived from aerospace technology, hence solving the temperature problem. 5.5 Turbocharged Direct Injection(TDi) The TDI engine uses direct injection, where a fuel injector sprays atomised fuel directly into the main combustion chamber of each cylinder, rather than the pre-combustion chamber prevalent in older diesels which used indirect injection. The engine also uses forced induction by way of a turbocharger to increase the amount of air which is able to enter the engine cylinders, and most TDI engines also feature an intercooler to lower the temperature (and therefore increase the density) of the 'charged', or compressed air from the turbo, thereby increasing the amount of fuel that can be injected and combusted. These, in combination, allow for greater engine efficiency, and therefore greater power outputs (from a more complete combustion process compared to indirect injection), while also decreasing emissions and providing more torque than the non-turbo and non-direct injection petrol engined counterpart from VAG. Because these engines are relatively low displacement and quite compact they have a low surface area. The resulting reduced surface area of the direct injection diesel engine reduces heat losses, and thereby increases engine efficiency, at the expense of slightly increased combustion noise. A direct injection engine is also easier to start when cold, due to more efficient placing and usage of glowplugs. Turbocharged Direct Injection is a design of turbodiesel engines developed and produced by the Volkswagen Group. These TDI engines are widely used in all mainstream Volkswagen Group marques of passenger cars and light commercial vehicles produced by the company (particularly those sold in Europe). They are also used as marine engines - Volkswagen Marine, and Volkswagen Industrial Motor applications. 5.6 Multiple Intake Valves On many newer engines with overhead valves and small fast-burn combustion chambers, there is often not enough wall space in the combustion chambers to fit the spark plug and exhaust valve and still have room for a large enough intake valve. For this reason, most engines are now built with more than one intake valve per cylinder. Two or three smaller intake valves give more flow area and less flow resistance than one larger valve, as was used in older engines. At the same time, these two or three intake valves, along with usually two exhaust valves, can be better fit into a given cylinder head size with enough clearance to maintain the required structural strength; shown in fig.
Fig 13- Possible valve arrangements for cylinders having multiple intake valves
Some engines with multiple intake valves are designed so that only one intake valve per cylinder operates at low speed. As speed is increased, less time per cycle is available for air intake, and the second (and sometimes third) valve actuates, giving additional inlet flow area. This allows for increased control of the flow of air within the cylinder at various speeds, which results in more efficient combustion. In some of these systems, the valves
8. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 34 | P a g e
will have different timing. The low-speed valve will close at a relatively early point at BDC. When operating, the high-speed valve(s) will then close at a later position (up to 20° later) to avoid lowering the volumetric efficiency. 5.7 Shrouded Intake Valve The intake system is so designed as to a give a tangential component to the intake flow as it enters the cylinder. This is done by shaping and contouring the intake manifold, valve ports and sometimes even the piston face. An offset port configuration is used which produces the required swirl. The swirling motion of the incoming charge decays itself into turbulence as the piston moves in the latter strokes. The turbulence achieved in this way is substantially higher than that of straight port cylinder head. The swirl produced greatly enhances the mixing of air and fuel to give a homogeneous mixture in the very short time available for modern high speed engines. This system was used by Bajaj for their DTS-Si (Digital twin spark-swirl Induction) engine currently used in their Pulsar and Discover models. Shown below is a way of producing Swirl. Fig 14- Shrouded Intake Valve 5.8 Variable Timing Electronic Control (VTEC) VTEC (Variable Valve Timing and Lift Electronic Control) is a valvetrain system developed by Honda to improve the volumetric efficiency of a four-stroke internal combustion engine. The VTEC system uses two camshaft profiles and hydraulically selects between profiles. The VTEC system provides the engine with multiple camshaft profiles optimized for both low and high RPM operations. In basic form, the single cam profile of a conventional engine is replaced with two profiles: one optimized for low-RPM stability and fuel efficiency, and the other designed to maximize high-RPM power output. The switching operation between the two cam lobes is controlled by the ECU which takes account of engine oil pressure, engine temperature, vehicle speed, engine speed and throttle position. Using these inputs, the ECU is programmed to switch from the low lift to the high lift cam lobes when the conditions mean that engine output will be improved. At the switch point a solenoid is actuated which allows oil pressure from a spool valve to operate a locking pin which binds the high RPM cam follower to the low RPM ones. From this point on, the valves open and close according to the high-lift profile, which opens the valve further and for a longer time. The switch-over point is variable, between a minimum and maximum point, and is determined by engine load. The switch-down back from high to low RPM cams is set to occur at a lower engine speed than the switch-up (representing a hysteresis cycle) to avoid a situation in which the engine is asked to operate continuously at or around the switch-over point. Fig 15- Working of VTEC 5.9 Camless valve Engines On 13th of April,2005, at the 100th SAE Congress in Detroit, USA, Powertrain Ltd. presented its Intelligent Valve Actuation (IVA), a technology to develop a camless engine prototype. The technology results from an 18-month joint research and development programme with Camcon Technology, the UK inventor and developer of binary actuation technology. Since October 2004 Powertrain and Camcon have joined forces to develop the technology in the automotive sector. The Camless engine technology utilizes several solenoids to open and shut the intake engine valves and the exhaust. The immense diversity prevails via solenoid, which comes in place of the old camshafts which had several timing limitations.
The employment of solenoid valve rids the limitation and providing the capability of limitless timing,
9. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 35 | P a g e
which translates to utmost efficiency in power, fuel consumption, and torque, which are controlled by the inbuilt computer. This technology uses armature attached to the valve system of the engine. Magnetic and solenoid attraction and repulsion actuates the ferromagnetic iron armature thus pulling it up and hence in turn closing the valve. When the current in the solenoid is then disrupted, the armature falls down due to its weight thus opening the valve. Springs attached to the valve stem help in the easy and vibration free movement of the armature and its returning back to its original position. Depending on the direction of current applied to the solenoid, this valve is driven either towards the open or close position. The ECU has the knowledge of the precise armature location and adjusts the current in the magnetic coil thus getting the most wanted valves motion. Mainly five sensors are used in connection with the valve operation. One for sensing the speed of the engine, one for sensing the load on the engine, exhaust gas sensor, valve position sensor and current sensor. The sensors will send signals to the electronic control unit. The electronic control unit consists of a microprocessor, which is provided with a software algorithm. The microprocessor issues signals to the solid-state circuitry based on this algorithm, which in turn controls the actuator, to function according to the requirements. This Camless engine has a number of benefits including an increment in a torque cohort of 40%, which transpires at the engagement of the clutch for the vehicle to speed. This leads to a fast start and smooth acceleration. The engine and supplementary parts last longer. There is no engine noise including hydraulic actuation that controls the closing rate, plus the valves which close gently. Camless engines are not without their problems though. Common problems include high power consumption, accuracy at high speed, temperature sensitivity, weight and packaging issues, high noise, high cost, and unsafe operation in case of electrical problems. Camless valve trains have long been investigated by several companies, including Renault, BMW, Fiat, Valeo, General Motors, Ricardo, Lotus Engineering and Ford. Some systems are commercially available, although not in production car engines. The 2007 W204 Mercedes Benz C-Class is expected to be the first car from German marque to use a camless engine. Mercedes calls it the technology KDI EVT. The KDI EVT is supercharged, with direct injection and uses an electronically controlled cam-less valvetrain. KDI EVT is likely to stand for “Kompressor Direct Injection Electronic Valve Train”. Fig 16- Camless Valve Engines VI. Conclusion Thus the automobile industry has come a long way in the process of evolution of the Suction processes in IC engines with the most modern cars having a combination of more than one systems such as Variable geometry Turbochargers along with MPFi or CRDi. Cars with Multiple intake valves with one or more of them being shrouded are also very common.TDi, i-VTEC are very common in these days in Volkswagen and Honda cars respectively. As the suction process is one of the most important processes in IC engines, the process of its evolution will always remain continuous with more and more impetus from the industry. References [1] Christopher.H.Onder, Lino Guzzella Optimized Control of a Pressure Wave Supercharger, Peter Spring, ,IEEE Transactions on Control Systems Technology,Vol.15,No.3,May,2007 [2] SAE Technical Paper 780413, 1978, Society of Automotive Engineers, Inc.[136]. [3] Chun Tai, Tsu-Chin Tsao, Department of Mechanical and Aerospace Engineering, University of California at Los Angeles, “Control of an Electromechanical Actuator for Camless Engines” SAE Paper 800794. [4] Caris, D. F. and Nelson, E. E. 1959. A New Look at High Compression Engines, SAE Transactions, vol. 67, pp. 112-124. [5] A. Cairns and H. Blaxill, "The Effects of Two-Stage Cam Profile Switching and External EGR on SI-CAI Combustion Transitions,” SAE Technical Paper, 2007- 01-0187, 2007 [6] Stefanopoulou, A.G. Dept. of Mech. & Environ. Eng., California Univ., Santa Barbara, CA, USA Kolmanovsky, I. ; Freudenberg, J.S. “Control of variable geometry turbocharged diesel engines for reduced emissions”, IEEE Explore
10. Dhruv Chawda et al. Int. Journal of Engineering Research and Applications www.ijera.com
ISSN : 2248-9622, Vol. 4, Issue 9( Version 1), September 2014, pp.
www.ijera.com 36 | P a g e
ISSN:1063- 6536http://dx.doi.org/10.1109/87.852917 [7] Riccardo Buratti, Alessandro Carlo, Enrico Lanfranco, Alberto Pisoni“Diesel Engine with Variable Geometry Turbocharger (VGT): A Model Based Boost Pressure Control Strategy” Springer Journal MeccanicaOctober 1997, Volume 32, Issue 5, pp 409-421 [8] Lucas Flückiger, Stephan Tafel, Peter Spring “Pressure-wave supercharged spark-ignition engines”, Springer Journal MTZ worldwide December 2006, Volume 67, Issue 12, pp 6-9