Mechanical Engineer
- Design Mechanical Sub-Discipline Works
- Project Management
- Strong Mechanical Fundamental
- Construction
- Oil and Gas
- API, ASME,ASTM, ASTM,DIN,BS EN, ISO
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
Cv ahmad harith.
1. 1 | P a g e
Ahmad Harith
www.linkedin.com/in/harithosman
Name: Ahmad Harith Bin Osman
Age: 28 years old
Resident: Flat Kampung Wira Jaya Blok B-3-8,
Taman Setapak Indah, 53100, Kuala
Lumpur
H/P Number: 016-2978438
Registered Body: Board of Engineers Malaysia (GE150154)
Academic: Bachelor of Mechanical Engineering with
Honours (Jan 2017)
Diploma in Mechatronic Engineering (Jan
2012)
Experience: ±3 years
Availability: Immediately
Company: Wan Husin & Associates Sdn Bhd
Duration: Sept 2017 – Jan
2019
Industry: Consultant and project management for construction and
building services
Position: M&E Engineer
Project No 1. MRSM Bera, Pahang
Description: Design, costing, produce technical requirement, management
and monitoring.
Services: 1. Air Condition and Mechanical Ventilation
2. Fire protection system
3. Cold and Hot water plumbing
4. Sanitary waste plumbing
5. Lift system
6. Kitchen equipment
7. Rain water harvesting system
8. Swimming pool
Project No 2. Hot Spring Gadek, Melaka
Description: Design, costing, produce technical requirement, management
and monitoring.
Services: 1. Air Condition and Mechanical Ventilation
2. Fire protection system
3. Cold and Hot water plumbing
4. Sanitary waste plumbing
5. Liquefied Petroleum Gas System
6. Hot water treatment
7. Swimming pool
Remark: This project focused on upgrading the existing hot spring
facility. Focusing in treating and stored hot spring by
developing new design. The new system allows users to enjoy
hot spring in their chalet. The new distribution system able to
fully utilize the hot spring resources by storing the hot spring
while maintaining the rightful minerals contained in it. The new
system which covers the whole Hot Spring Gadek development
with least maintenance required.
Project No 3. Kompleks Dayabumi, Kuala Lumpur
Description: Review existing facility equipment condition, review shop
drawing by the contractor, and produce technical requirement,
project management and installation supervision.
Services: 1. Fire Certificate by BOMBA
2. Refurbishment of Cold and Drinking water plumbing
Remark: BOMBA has put an act on 2001 in the Fire Services
Regulations that premises which are more than 18 meters but
2. 2 | P a g e
Ahmad Harith
www.linkedin.com/in/harithosman
exceptional to residential are to be renew yearly. The renewal
contract are subjected to BOMBA inspection. These action are
to be done and execute by the building owner with
corresponding Professional Engineer validation. The
Dayabumi Complex Fire Certificate has successfully renew
with the cooperation from the Building Management Committee
by obeying each regulation with utmost detail of the existing
condition which result in satisfactory by the appointed
inspection BOMBA.
The Dayabumi Complex existing cold and drinking water
plumbing has degrade the system efficiency has impacted the
building forecast budget of their utilities. Hence, KLCCUH and
Dayabumi Complex Management committee agreed to
refurbish their existing system with newly marketed material
that is Polypropylene Random (PP-R). The material has an
extensive efficiency whereby the conveyance system having
near zero frictionless material. The Polypropylene Random
(PP-R) pipe connection uses fusion welding makes it near
impossible to leak. The new pipe has successfully install and
bring down the total cost of the annual utility usage, thus
enabling the building maintenance forecast at much greater
cost reduction.
Project No 4. RAPID Pengerang, Johor
Description: Review construction drawing, technical specification, project
management and monitoring
Services: 1. Fire water system
2. Pipeline
Remark: Technip FMC appointed Wan Husin & Associates as a
Principal Submitting Person (PSP) whereby our scope of work
is to overseeing the entire projects development and building
that resulting in the issuance of the CCC. For this purpose, 21
forms (form G1 to G21) to be complied and it is also introduce
under the Second Schedule of the Uniform Building by Law
(UBBL) 1984. My scope of work in this project is the pipeline
and fire water system which are to be complied with G5 for the
pipeline and Active Fire Submission to the BOMBA. Currently,
the process of CCC issuance are in progress and the overall
project are on course.
Pipeline are to be comply with standards and regulations
bodies. Such as BS EN ISO and regulation bodies which is
SAJH and SPAN. Complying to these two in terms of
supervision and design wise is a bit challenging as the EPCC
for this project is massive and coordination with each EPCC
are comprehended with ease with method of follow up on daily
basis and cooperation from each parties.
Fire Water System which are to compliance with NFPA 2001,
NFPA 13, NFPA 850, NFPA 120, NFPA 17, and various more.
Malaysia standard are not capable to comprehend with Oil &
Gas project, thus selection of designing and incorporating the
information to the authority is challenging since it is not vastly
introduce to each BOMBA personnel.
Project No 5. Sports Complex Bagan Datoh, Perak
Description: Design, costing, produce technical requirement, management
and monitoring.
Services: 1. Air Condition and Mechanical Ventilation
2. Fire protection system
3. 3 | P a g e
Ahmad Harith
www.linkedin.com/in/harithosman
3. Cold and Hot water plumbing
4. Sanitary waste plumbing
5. Kitchen equipment
6. Rain water harvesting system
7. Irrigation system
Remark: In this project, focuses on the irrigation design for the Padang
Bola Sepak. Conventionally, in a project, to design the irrigation
the client were to appoint a third party consultant. However, in
this project with its minimal cost, client and consultant are to
produce in order to comply with the JKR need statement. Thus,
I able to produce a complete system for the irrigation with
minimal cost at RM35, 000. Appointing a third party consultant
would consume more than RM100, 000. It’s an achievement
for both party and able to comply with the need statement.
Project No 6. Elevated Parking UTC Keramat, Kuala Lumpur
Description: Design, costing, produce technical requirement, project
management and monitoring.
Services: 1. Air Condition and Mechanical Ventilation
2. Fire protection system
3. Cold and Hot water plumbing
4. Sanitary waste plumbing
5. Rain water harvesting system
Project No 7. Menthol Flaker Lemongrass Plant, Pahang
Description: Review construction drawing, technical specification, project
management and monitoring
Services: 1. Fire protection system
2. Pipeline
3. Air condition and mechanical ventilation
4. Cold and Hot water plumbing
Remark: Jacobs Engineering appointed Wan Husin & Associates as the
Principal Submitting Person whereby recommended by
PETRONAS and BASF in which previous successful project
base. Wan Husin & Associates is responsible for overseeing
the entire projects development and building that resulting in
the issuance of the CCC. Under the CCC’s system, 21
components have been identified for the certificate of
construction stages. For this purpose, 21 forms (form G1 to
G21) was introduce under the Second Schedule of the Uniform
Building by Law (UBBL) 1984 (Amendment) Order 2007.
Project No 8. Aman Beach Club Desaru, Johor
Description: Design, costing, produce technical requirement, management
and monitoring.
Services: 1. Air Condition and Mechanical Ventilation
2. Fire protection system
3. Cold and Hot water plumbing
4. Sanitary waste plumbing
Company: Enthu Technology Sdn Bhd
Duration: March 2017 – July 2017 (contract)
Position: Technical Engineer
Industry: System Integrator
Description: - Liaise with main contractor and sub-contractor to ensure
smooth working program of construction
- Involved in numerous project such as, Semi-Conductor
OSRAM factory at Kulim and Berjaya Central Park Tower,
Kuala Lumpur
4. 4 | P a g e
Ahmad Harith
www.linkedin.com/in/harithosman
- Conduct Operation and Manual to operators regards to
software that we provide such as PLC, HMI, SCADA and etc
- Conduct testing & commissioning
- Involvement in ISO 9001
Company: My Robot Education Sdn Bhd
Duration: 10 weeks
Position: Trainee Engineer
Industry: Educational Robotic
Description: Internship Programme
- Expose to robotic mechanism and software such as Arduino
and PLC
- Other task assigned by superior
Proficiency
Description Level Years of Experience
AutoCAD Intermediate 1
Microsoft Office Professional 3
Solid works Amateur < 1
Ansys Amateur < 1
Abaqus Amateur < 1
Language Capability
Malay Native
English Professional
Additional Knowledge
Description Level
ASME B31.1
ASME B31.4
ASME B31.8
Amateur
Amateur
Amateur
DNV OS F101 Amateur
Achievement
Focused Recognition by
Referee
Name Position Company H/P Number Years known
Ir Nazri Amin Head of
Architecture
and
Structure
KLCC Urus
Harta Bhd
+60196752205 2
Nizam Maftar Quantity
Surveyor
Sunissa Sdn Bhd +60193248056 2