Involved in Detail and Basic engineering projects in Oil & Gas and Refinery. I have exposure to softwares like HTRI, HYSYS. Experience in Line and Control valve hydraulics, Pump hydraulics. Vendor offer checking of equipments, instrumnets amd compressors. Worked in Oil and gas projects as well as refinery projects. Exposure to API/Shell/ Saudi Aramco standards.
Process Design Engineer with 8.0 Years of experience in Oil & Gas and Refinery.
1. ASHISH KUMARASHISH KUMAR
House No- 410 1st
Floor Ashoka Enclave Part 3 Faridabad 121003 Haryana India.
Email: kumar.ashish04@gmail.com; Mobile: +919971765481
CHEMICAL ENGINEERING:CHEMICAL ENGINEERING:
Seeking a position to utilize my skills and abilities in Industry that offers professional growth and self
satisfaction while being resourceful, innovative and flexible.
PROFILE:PROFILE:
• Qualified B.E Hons (Chemical Engineering) from Thapar University, Patiala, Punjab India in
2008 with good technical proficiency and practical experience, gained while working on different
projects as part of professional involvement.
• Enriched with the ability to learn new concepts & technology within a short span of time and possess
capability and willingness to be a part of growth oriented Organization.
• Detail –oriented, with proven communication and analytical skills, can handle multiple tasks to meet
deadlines in pressure situations.
• Strong problem solving & analytical skills with the flexibility to work cohesively as part of a
multidisciplinary team, complimenting the skills of others.
WORK EXPERIENCE:
Engineering (Design)
Process Engineer with 8.0 years of experience in Detail and Basic Engineering in Oil & Gas
Industry and Refinery.
Core Strength:
• Worked for Basic and Detail Engineering Projects and skid mounted projects.
• Experience in Process Engineering Calculations and process deliverables.
• P&ID Management.
• Simulation and Refinery softwares like Aspen Plus , Hysys, HTRI, Flarenet, FRNC 5,
PHA Works for Hazop.
• Exposure to API / Shell DEP/ Saudi Aramco Standards.
Specialities:
• Development of PFDs, UFDs, MSDs & P&IDs.
• Preparation of Equipment and Instrument data sheet.
• Sizing of Horizontal and Vertical separator as per Shell DEP.
• Hydraulic calculation for single phase and two phase lines.
• Hydraulic calculations for pumps and control valves.
• Tank inbreathing & out breathing rate calculation.(Referred API 2000)
• PSV Relief load calculations, Preparation of Relief Load summary, Inlet and outlet line sizing
calculation, PSV orifice size calculation. (Referred API 520/521)
• Thermal Design of Shell and Tube Heat exchanger and Air Cooler using HTRI Ver -7.
• Participation in piping model review meeting.
• Interface with other departments.
• Calculation of Flow distributor for vessels.
• Preparation of Alarm & Set Point list.
• Vendor offer checking of Air Cooler, Filters, Fired Heater, Treaters, Vessels, Internals, Compressors,
Tanks, Column, Packages, Pump, Electrical heaters and Exchangers.
• Participation in HAZOP meeting and have knowledge of PHA software.
• Preparation of Cause & Effect Matrix & Control Narrative.
• Participation in P&ID review meeting with client.
• Vendor drawing checking of heat exchanger and rerunning actual vendor data’s on HTRI.
2. Currently Working as Assistant Manager at G.S. Engineering Gurgaon India from
09-03-2015
till date.
Projects in GS Engineering:
• Detail Engineering KNPC Revamp Job.
Involved in revamp job. Activities include development of P&IDs, hydraulic calculations, Tie-in mark up,
vendor offer checking.
• Detail Engineering STAR REFINERY TURKEY.
It consists of various refinery units. I am involved in CCR and SRU Unit. Activities include development
of P&IDs, hydraulic calculations, thermal design of heat exchangers. Vendor offer checking of
equipment and instrument, Preparation of equipment and instrument data sheets.
Worked as Assistant Manager at Larsen & Toubro Limited Faridabad from
11-10-2012 till 28-02-2015.
Projects in L&T:
• Detail Engineering SAUDI ARAMCO Job MIDYAN.
It consists of skid mounted modules and involves treatment of gas, condensate and water coming from
gas wells. Gas is cooled and dehydrated and being sent to pipeline via gas compressors. Condensate is
stabilized and sent to pipeline via shipping pumps and water is treated and discharged to open pond.
Major achievements in Midyan Job :-
1. Independently handling the condensate stabilization, Propane refrigeration, Sales gas compressor
module and Gas Dehydration Unit module (TEG Regeneration module).
2. Approval from client on sales gas compressor type and configuration.
3. Retaining electrical heater as reboiler for condensate stabilizer column instead of bulky HOT OIL
system resulting in cost, layout and schedule optimization.
• Revamp of Burren Plant based in Turkmenistan.
It involves engineering of API separator, Gas separation and Fuel gas metering skid modules.
Major achievements in Burren Job :-
1. Close and direct interaction with vendor and client in closing technical issues resulting in fast track
closure of project and hence saving of manhours.
• Revamp job of MAA Refinery for KNPC.
It involves basic engineering for installation of 3 Fired heaters in LPG Train and installation of fully
automatic sea water filters in water lines in MAA refinery of KNPC.
Major achievements in MAA Refinery Job :-
1. Independently finalized offer of fully automatic filter in close interaction with vendor and client with
minimum pressure drop which was a major challenge in this job and hence meeting client
requirement.
3. Worked as Senior Process Engineer at Lurgi India Pvt Limited in New Delhi from
01-07-2008
to 10-10-2012.
Projects in Lurgi:
• Detail Engineering Coal Based Reduction Gas Facility Project (JSPL).
It involves detail engineering of Phenosolvan Unit of JSPL Project. The Phenosolvan unit deals with
extraction of Phenols from Gas liquor.
• Detail Engineering Iran Liquefied Corporation (ILC Iran Project).
It involves detail engineering of LPG Sweetening unit of ILC Iran Project. LPG Sweetening unit deals
with removal of COS and Mercaptans from Propane and Butane by Adsorption Phenomenon.
• Basic Engineering Baofeng Rectisol China Project.
It involves basic engineering job of Rectisol Project. Rectisol Unit deals with removal of NH3, HCN,
CO2, COS using cold Methanol.
ACHIEVEMENTS:
Got Scholarship during 3rd
year in Thapar University Patiala.
Got ICON Award for best performer in Process Department in Larsen & Toubro (L&T).
EDUCATION & PROFESSIONAL CREDENTIALS:EDUCATION & PROFESSIONAL CREDENTIALS:
BACHELOR OF ENGINEERING HONORS (Chemical) - 2008
Thapar Institute of Engg. & Tech., Patiala, Punjab, Thapar University; Attained 8.8 CGPA
I.Sc (Bihar State Board) – 2003
GAYA COLLEGE, MAGADH UNIVERSITY GAYA, BIHAR Attained 66.7%
CLASS 10th
(CBSE)– 2001
GYAN BHARTI PUBLIC SCHOOL GAYA, BIHAR Attained 75.2%
PASSPORT DETAILS:
Passport Number: M9512291
Nationality : Indian
Date of Issue : 18/06/2015
Date of Expiry : 17/06/2025
4. OTHER PARTICULARS:
Father’s Name: Baijnath Prasad
Occupation: Businessman
Mother’s Name: Usha Devi
Occupation: Housewife
Spouse Name: Ankita Sah
Date of Birth: October 9, 1985
Marital Status : Married
Language Proficiency: English & Hindi
Hobbies: Reading Newspaper, Playing Badminton, Table Tennis.
Strength: Hardworking, Team Management.
The above information furnished by me is true to the best of my knowledge.
ASHISH KUMAR