CRACKSEAL SUPER is an easy to use, prepacked high strength, fast setting crack repair mortar, which ensures perfect filling of cracks and will not allow water penetration.
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
Vacuum concrete is the type of concrete in which the excess water is removed for improving concrete strength.
The water is removed by use of vacuum mats connected to a vacuum pump.
The main aim of this technique is to extract extra water from concrete surface using vacuum dewatering.
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
Vacuum concrete is the type of concrete in which the excess water is removed for improving concrete strength.
The water is removed by use of vacuum mats connected to a vacuum pump.
The main aim of this technique is to extract extra water from concrete surface using vacuum dewatering.
FAIRCRETE RMW (C) a concentrate, high performance waterproofing additive is based on high performance polymers, which reduces the permeability throughout the depth of concrete. It confirms to IS 2645 - 1999. FAIRCRETE RMW (C) added 100 ml per bag of cement.
Shotcrete normally has a greater compressive strength then cast in place concrete due to lower water to cement ratio.
The guniting is the most effective process of repairing concrete work which has been damaged due to inferior work or other reasons. It is also used for providing an impervious layer.
This document is prepared for our major project submission for B.tech degree. the project deals with improvement of compressive strength of pervious concrete with out affecting its permeability property much.
JBA Concrete Solutions Pvt. Ltd. is a leading company specializes in providing New-Age Concrete Solutions across India. JBA offers a complete assortment of high-performance floor solutions for the protection and beautification of Industrial, Institutional, Residential, and Office Concrete floors. We would like to introduce ourselves that we are providing Concrete Solutions based on 3Rs concepts that are Repair, Restorations, and Rehabilitation of Concrete since last more than two decades now.
We wish to introduce to you:-
Ashford Formula (The Densification Concept)
Retroplate System (Concrete Polishing and Restoring System)
Rapid Set® Cement All (Repair and Grouting)
Concrete Dyes (An art you can walk on)
PNA Dowel System (For Construction Joints)
PNA Hydra Cure Covers (Reduce Discoloration and Residue on your Slabs)
MM-80 (Heavy Duty Epoxy Joint Filler)
Grass Crete (To grow grass in RCC Pockets)
HYCRETE – for water Resistance Concrete
We have done over 100 million SFT of concrete floor treatment in India. To name a few references – DMRC, Jaipur Metro, BMRCL, Jotun paints, AUDI, BMW, 3M India, TAFE, Force Motors, FORD, DAIMLER, General Motors, Bajaj, Apollo Tyres, Ceat Tyres, Caparo, Bonfiglioli, Metro Cash & Carry, Dr. Reddys Laboratories, Parle Products, Kemwell, P&G, Cadbury, Ranbaxy, ZYDUS, COKE etc., had treated their floors using our state-of-the-art densification treatments.
FAIRCRETE RMW (C) a concentrate, high performance waterproofing additive is based on high performance polymers, which reduces the permeability throughout the depth of concrete. It confirms to IS 2645 - 1999. FAIRCRETE RMW (C) added 100 ml per bag of cement.
Shotcrete normally has a greater compressive strength then cast in place concrete due to lower water to cement ratio.
The guniting is the most effective process of repairing concrete work which has been damaged due to inferior work or other reasons. It is also used for providing an impervious layer.
This document is prepared for our major project submission for B.tech degree. the project deals with improvement of compressive strength of pervious concrete with out affecting its permeability property much.
JBA Concrete Solutions Pvt. Ltd. is a leading company specializes in providing New-Age Concrete Solutions across India. JBA offers a complete assortment of high-performance floor solutions for the protection and beautification of Industrial, Institutional, Residential, and Office Concrete floors. We would like to introduce ourselves that we are providing Concrete Solutions based on 3Rs concepts that are Repair, Restorations, and Rehabilitation of Concrete since last more than two decades now.
We wish to introduce to you:-
Ashford Formula (The Densification Concept)
Retroplate System (Concrete Polishing and Restoring System)
Rapid Set® Cement All (Repair and Grouting)
Concrete Dyes (An art you can walk on)
PNA Dowel System (For Construction Joints)
PNA Hydra Cure Covers (Reduce Discoloration and Residue on your Slabs)
MM-80 (Heavy Duty Epoxy Joint Filler)
Grass Crete (To grow grass in RCC Pockets)
HYCRETE – for water Resistance Concrete
We have done over 100 million SFT of concrete floor treatment in India. To name a few references – DMRC, Jaipur Metro, BMRCL, Jotun paints, AUDI, BMW, 3M India, TAFE, Force Motors, FORD, DAIMLER, General Motors, Bajaj, Apollo Tyres, Ceat Tyres, Caparo, Bonfiglioli, Metro Cash & Carry, Dr. Reddys Laboratories, Parle Products, Kemwell, P&G, Cadbury, Ranbaxy, ZYDUS, COKE etc., had treated their floors using our state-of-the-art densification treatments.
special concrete and high performance concreteErankajKumar
GROUTING OF CONCRETE, advantage ofGrouting,Characteristics of Grouting, GUNTING OF
CONCRETE, Application of Guniting, Properties of Guniting, advantage and disadvantage of Guniting, UNDERWATER CONCRETING, Properties of underwater concrete, METHODS OF UNDERWATER CONCRETE, advantage and disadvantage of underwater concrete, HOT WEATHERING CONCRETE, precautions, COLD WEATHER CONCRETING, PUMPABLE CONCRETE, Requirements of Mix Design for Pumpable Concrete, Ready Mixed Concrete RMC, Types of Ready Mixed Concrete, advantage and disadvantage of ready mixed concrete, introduction in High performance concrete HPC, selection of materials, behaviour of fresh high performance concrete HPC , behaviour of Hardened High performance concrete HPC when to use High performance concrete HPC , application of HPC , Advantage of HPC , Limitations of HPC
CRACKSEAL HC is a cementitious crack sealing material in powder form. It is easy to apply. It sets quickly on application and can be over coated with common paints / coatings.
DETAILED STUDY OF FOAM CONCRETE
1- MATERIALS USED
2- MACHINE USED( HAND MAKING WORKABLE EQUIPMENT FOR MIXING)
3-TESTING PROCEDURE
4- YOU GUYZ CAN ALSO LEARN THROUGH THE PHOTOGRAPHS
FLOWGROUT 60 (M) is a single pack, ultra high strength, free flowing, non-shrink grout. FLOWGROUT 60 (M) is a blend of specially processed cement and special fillers, free from corrosive substances and additives. FLOWGROUT 60 (M) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (M) is suitable for gap widths between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (M) resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm.
FLOWGROUT 60 (S) is based on specially processed cement containing fillers and additives. FLOWGROUT 60 (S) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (S) is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (S) can be used (see separate data sheet for more information) for thickness in excess fo 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
FLOWGROUT 60 is a single pack ready to use, ultra high strength, free flowing, non shrink grout. FLOWGROUT 60 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS:1881 Part-116, 1983, BS:4551, 1980 and ASTM C 469-83, ASTM C 940.
FLOWGROUT AG is a high strength, super flowing, large section cementitious grout. It is a blend of specially selected cement, silica, aggregates and additives, when mixed with water. It produces a consistent, reliable, non-shrink, ultra high strength large section grout.
FLOWGROUT AG complies to BS 6319 : Part-2 and ASTM C 157-93.
A Single pack ready to use, high strength, free flowing, non shrink grout. FLOWGROUT 40 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS : 1881 Part-116, 1983, BS : 4551 : 1980 and ASTM C 469-83, ASTM C 940.
FAIRGROUT is a two pack high strength, non-shrink polymer cementitious grout with both high early and ultimate strengths. FAIRGROUT has excellent flow properties and will not shrink after placing. FAIRGROUT is free from corrosive substances. FAIRGROUT is suitable for use in gap width of between 10-50 mm. In order to achieve optimum quality exposed FAIRGROUT and the outer surface of any shuttering should be protected from weather conditions for at least 12 hours. Sacks, matting, plastic sheets etc. should be placed as protection immediately after placing the grout.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
FAIRADD S is a combination of an expanding and plasticising agent. The expanding agent, generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The plasticising agent enables high workability mixes to be produced with relatively low water/cement ratio. Stability and cohesion of the grout is greatly increased. The expansion is controlled to avoid excess built up that is sufficient to provide high bonding of the grout to the contact surfaces with the absence of voids.
It confirming to BS 8110 Part-1 : 1985, Section 8.9.4.6.
FAIRADD CG is supplied as a dry powder requiring only the addition of a controlled amount of clean water and cement to produce a free flowing non shrink grout. FAIRADD CG is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand. The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.
FAIRADD CG complies to BS 1881 : Part-116, 1983 and ASTM C 827-87, ASTM C 1107 Grade C.
ANCHORGROUT can be used for high strength corrosion resistant, anchoring of bolts and a permanent installation of reinforcement doweling and starter bars, foundation bolts, base plates, hand rails, safety fences, wall tiles, railway tracks, tie back anchors and grout for tower cranes.
Due to its thixotropic nature, ANCHORGROUT can be used in vertical, horizontal and overhead situations where the hole diameter exceeds the bar diameter by not less than 4 mm and not more than 25 mm.
Where it is necessary to obtain a quick high strength fixing into concrete, brick, masonry, block-work, rock or other material of sufficient strength to take the load required of the fixing. ANCHORFIX CAPSULE can be fixed into horizontal and vertical surfaces, or overhead.
FAIRSCREED R is used to repair spalled columns, soffits, gutters, lintels etc.
It is also used for repairing of damaged concrete floors, spalled concrete roads and runways.
Used to repair damaged concrete kerbs, pipes and precast units, as a bedding mortar for tiles on uneven floors or under corrosive conditions.
FAIRSCREED PR is the name given to a range of polyester based products which will fulfill many specialist applications in the jointing, patching and repair fields of the building and civil engineering industries.
The mixing of resin and hardener starts a polymerisation process resulting in excellent mechanical properties like high compressive strength, high flexural strength, high tensile strength, corrosion resistance of cured material. The unique hardner system in the FAIRSCREED PR range enables the mix to be varied from a pourable consistency to a trowelable mortar without significantly affecting the setting times or strengths achieved. Being polyester-based, selected grades of FAIRSCREED PR will harden and cure at temperatures down to freezing point.
This wide tolerance in use makes FAIRSCREED PR almost fullproof, and because part packs and extra aggregate can be used, the material is very economical.
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel applied, four component Methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
FAIRMATE SILENT BREAK HSCA is a noncombustible and non-explosive material. It is safe and convenient in transportation, storage and operation. FAIRMATE SILENT BREAK HSCA is a silent demolition agent which does not cause any Vibration, noise, flying rocks, ash and hazardous gas during demolition. Demolition and cutting are allowed to be used according to working scheme. FAIRMATE SILENT BREAK HSCA can gain a high yield for mining of granite, marble etc. It is very easy to crush & remain reinforced concrete structures on demand during demolition.
FAIRMATE CARBON WRAP is based on new technology designed to completely guarantee the original structure's performance by increasing the strength, durability and vibration resistance. FAIRMATE CARBON WRAP is applied to deteriorated concrete areas on horizontally and vertically.
FAIRCRETE SBR is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE SBR(S) is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRCRETE SB complies to BS 6319.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
Gujar Industries India Pvt. Ltd is a leading manufacturer of X-ray baggage scanners in India. With a strong focus on innovation and quality, the company has established itself as a trusted provider of security solutions for various industries. Their X-ray baggage scanners are designed to meet the highest standards of safety and efficiency, making them ideal for use in airports, government buildings, and other high-security environments. Gujar Industries India Pvt. Ltd is committed to providing cutting-edge technology and reliable products to ensure the safety and security of their customers.
Bridging the Language Gap The Power of Simultaneous Interpretation in RwandaKasuku Translation Ltd
Rwanda is a nation on the rise, fostering international partnerships and economic growth. With this progress comes a growing need for seamless communication across languages. Simultaneous interpretation emerges as a vital tool in this ever-evolving landscape. When seeking the best simultaneous interpretation in Rwanda, Kasuku Translation stands out as a premier choice.
Citizen Air Conditioning Services has offered its services to residential and commercial customers, including air conditioning systems inspections and repairs, boiler installations, mini-split systems, and other cost-effective heating solutions by factory-trained technicians. Other services offered include installation of indoor and outdoor fireplaces, patio and pool heaters, outside gaslighting and BBQs, as well as water system and plumbing services.
Stay updated on Siddhivinayak Temple events and timings in Houston, TX. Join our spiritual and community gatherings. Visit us now! gaurisiddhivinayak.org
Optimize your online presence as an interior designer in Delhi with tailored SEO strategies. Elevate visibility on search engines, ensuring your design prowess reaches the right audience. Craft engaging content that resonates with local clientele, incorporating relevant keywords and metadata. Harness the power of local SEO techniques to dominate search results, driving organic traffic and inquiries. Stay ahead in Delhi's competitive market by fine-tuning your digital footprint with effective SEO practices.
Merchants from high-risk industries face significant challenges due to their industry reputation, chargeback, and refund rates. These industries include sectors like gambling, adult entertainment, and CBD products, which often struggle to secure merchant accounts due to increased risks of chargebacks and fraud.
To overcome these difficulties, it is necessary to improve credit scores, reduce chargeback rates, and provide detailed business information to high-risk merchant account providers to enhance credibility.
Regarding security, implementing robust security measures such as secure payment gateways, two-factor authentication, and fraud detection software that utilizes machine learning systems is crucial.
Discover How Long Do Aluminum Gutters Last?SteveRiddle8
Many people wonder how long aluminum gutters last. In this ppt, we will cover the lifetime of aluminum gutters, appropriate maintenance procedures, and the advantages of using this material for gutter installation.
This PDF offers clear and concise instructions on wearing and placing medals and ribbons on U.S. Coast Guard uniforms. It provides detailed guidelines to ensure adherence to official standards, helping service members maintain a professional and regulation-compliant appearance. Perfect for quick reference, this guide is an essential resource for all Coast Guard personnel.
Sustainable Solutions for Chemical Waste Disposal by Summerland Environmental...Summerland Environmental
Welcome to the presentation on Sustainable Solutions for Chemical Waste Disposal by Summerland Environmental. We will explore innovative methods and technologies for eco-friendly waste management.
Job Vacancies in Norway 🇳🇴
Warehouse Workers for Clothing
2year WORKPERMIT 👍
Salary: €3900-4300 per month (Paid twice a month).
Requirements:
* Duties include quality control of products, order picking, packing goods, and applying stickers and labels.
* Work schedule: 8-10 hours per day, 5 days a week.
Documents 📄
*Adhar
Pan
Photo
Education documents
Basic English**o
Education documents
Basic English**
Photo
Education documents
Basic English**
DOJO Training Center - Empowering Workforce ExcellenceHimanshu
The document delves into DOJO training, an immersive offline training concept designed to educate both new hires and existing staff. This method follows an organized eight-step process within a simulated work setting. The steps encompass safety protocols, behavioral coaching, product familiarity, production guidelines, and procedural understanding. Trainees acquire skills through hands-on simulations and rehearsal prior to transitioning to actual shop floor duties under supervision. The primary aim is to minimize accidents and defects by ensuring employees undergo comprehensive training, preparing them effectively for their job roles.
All Trophies at Trophy-World Malaysia | Custom Trophies & Plaques Supplier. Come to our Trophy Shop today and check out all our variety of Trophies available. We have the widest range of Trophies in Malaysia. Our team is always ready to greet your needs and discuss with you on your custom Trophy for your event. Rest assured, you will be with the best Trophy Supplier in Malaysia. The official Trophy Malaysia. Thank you for your support.
Forex Copy trading is the mode of trading offering great opportunities to the traders lacking time or in-depth market knowledge, yet willing to use currency trading as a form of investment and to increase their initial funds.
Emmanuel Katto Uganda - A PhilanthropistMarina Costa
Emmanuel Katto is a well-known businessman from Uganda who is improving his town via his charitable work and commercial endeavors. The Emka Foundation is a non-profit organization that focuses on empowering adolescents through education, business, and skill development. He is the founder and CEO of this organization. His philanthropic journey is deeply personal, driven by a calling to make a positive difference in his home country. Check out the slides to more about his social work.
Looking for a genuine company for your Spanish Marriage Certificate Attestation? It is an important step to prove the authenticity of a certificate for any purpose in Dubai. Attestation On Time in Dubai is the perfect choice for your Spanish Marriage Certificate Attestation.
Purpose of attesting your Spanish marriage Certificate:
- To apply for family visa
- To enroll your child at school
- Other legal purpose
Why Attestation On Time is your best choice?
- Expert guidance will be provided with complete attestation procedures
- Safety and authenticity are always our top priority and concern
- Fastest service provider in Dubai
- We offer live status updates of your certificates
- We accept certificate from anywhere in the world
Attest your certificates with the help of our attestation experts. Contact us now +971 555514789 /+971 42955338 or share your queries to info@attestationontime.com or visit our website www.attestationontime.com
Solar power panels, also known as photovoltaic (PV) panels, convert sunlight into electricity, offering a renewable and sustainable energy solution. Composed of semiconductor materials, typically silicon, these panels absorb photons from sunlight, generating an electric current through the photovoltaic effect. This clean energy source reduces dependence on fossil fuels, mitigates greenhouse gas emissions, and contributes to environmental sustainability.
2. Benefits
Fast setting, factory controlled.
Ready and easy to use.
Prepacked crack repair mortar, only precise quantity of water is
required.
Dense & cohesive mortar will not allow water penetration.
Non-metallic & chloride free.
Ensures water tightness from treated cracks.
Non shrink Eliminates shrinkage problems associated with
conventional cement concrete / mortars and ensures effective
bonding.
3. Uses
• CRACKSEAL SUPER has been designed specially to provide a very fast
set crack repair mortar in concrete floors, walls and pavements.
• It is used for filling of cementitious cracks on vertical & horizontal surfaces
such as terrace & walls.
• Can be used for cracks in exposed conditions on plaster, masonry or
concrete upto 20 mm width.
4. Description
CRACKSEAL SUPER is an easy to use, prepacked high strength, fast
setting crack repair mortar, which ensures perfect filling of cracks and will
not allow water penetration.
5. Properties
Physical appearance : Grey color.
Compressive strength : 650 kg/cm² @ 28 days
Wet density : 2100 kg/m³
Initial setting time : 15 min
Final setting time : 45 min
6. Packing & Coverage
CRACKSEAL SUPER is supplied in 1kg, 5Kg & 25kg. in sealed polythene
packs. 5 Kg. of CRACKSEAL SUPER will give the yield of 2.4 ltrs which
will approximately cover 2-3mm cracks having the width & depth of 10 mm
- 15 mm.
7. Packing & Coverage
CRACKSEAL SUPER is supplied in 1kg, 5Kg & 25kg. in sealed polythene
packs. 5 Kg. of CRACKSEAL SUPER will give the yield of 2.4 ltrs which
will approximately cover 2-3mm cracks having the width & depth of 10 mm
- 15 mm.