FAIRCRETE SBR is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRCRETE SBR(S) is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRFLO SC1 is based on modified sulphonated Nepthalene formaldehyde polymer. FAIRFLO SC1 can be used in may ways to obtain dense, high strength, durable and very cohesive mix to maintained its cohesiveness upto much more longer time.
FAIRCRETE RMW (C) a concentrate, high performance waterproofing additive is based on high performance polymers, which reduces the permeability throughout the depth of concrete. It confirms to IS 2645 - 1999. FAIRCRETE RMW (C) added 100 ml per bag of cement.
FAIRFLO SC2 is based on modified sulphonated Nepthalene formaldehyde polymer. FAIRFLO SC2 can be used in may ways to obtain dense, high strength, durable and very cohesive mix to maintained its cohesiveness upto much more longer time.
FAIRFLO SCA is a differentiated from conventional superplasticisers in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly inproves cement dispersion. At the start on the mixing process an electrostatic dispersion occurs but the cement particles capacity to separe and disperse. This mechanism considerably reduces the water dement in flowable concrete. FAIRFLO SCA combines the properties of water reduction and workability retention. It allows the production of high performance concrete and / or concrete with high workability. FAIRFLO SCA is particularly strong superplasticiser allowing production of consistent concrete properties around the required dosage.
FAIRCRETE R3 is a formulated blend of polymeric materials based on hydrolysed carbohydrate derivatives. It is designed to give maximum cement particles' dispersion without producing unwanted secondary side effects. This results in good, dense concrete having exceptionally high strength. FAIRCRETE R3 acts as a normal water reducing admixture at low to medium rates. At higher dosage, it acts as a retarding plasticiser. The amount of retardation will also depend on chemical composition of the cement and concrete temperature.
SBS 2511 GA(S) is an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA(S) conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA(S) results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA(S) helps in increasing the mill output at same cement fineness.
FAIRFLO S-NCC is supplied as brown liquid based on modified sulphonated Nepthalene slump retainer polymer. The powerful dispersing agent of the high range water reducing super plasticizer can be used in many ways to obtain dense, high strength durable concrete (M35, M40, M45 M50). The high water reduction properties makes of FAIRFLO S-NCC an ideal application in precast concrete where high early strength is of paramount importance. FAIRFLO S-NCC is chloride free.
FAIRCRETE SBR(S) is a single component white emulsion polymer specially designed for use as a bonding aid and for cementitious systems. It is resistant to hydrolysis and can therefore be used for external applications too.
FAIRFLO SC1 is based on modified sulphonated Nepthalene formaldehyde polymer. FAIRFLO SC1 can be used in may ways to obtain dense, high strength, durable and very cohesive mix to maintained its cohesiveness upto much more longer time.
FAIRCRETE RMW (C) a concentrate, high performance waterproofing additive is based on high performance polymers, which reduces the permeability throughout the depth of concrete. It confirms to IS 2645 - 1999. FAIRCRETE RMW (C) added 100 ml per bag of cement.
FAIRFLO SC2 is based on modified sulphonated Nepthalene formaldehyde polymer. FAIRFLO SC2 can be used in may ways to obtain dense, high strength, durable and very cohesive mix to maintained its cohesiveness upto much more longer time.
FAIRFLO SCA is a differentiated from conventional superplasticisers in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly inproves cement dispersion. At the start on the mixing process an electrostatic dispersion occurs but the cement particles capacity to separe and disperse. This mechanism considerably reduces the water dement in flowable concrete. FAIRFLO SCA combines the properties of water reduction and workability retention. It allows the production of high performance concrete and / or concrete with high workability. FAIRFLO SCA is particularly strong superplasticiser allowing production of consistent concrete properties around the required dosage.
FAIRCRETE R3 is a formulated blend of polymeric materials based on hydrolysed carbohydrate derivatives. It is designed to give maximum cement particles' dispersion without producing unwanted secondary side effects. This results in good, dense concrete having exceptionally high strength. FAIRCRETE R3 acts as a normal water reducing admixture at low to medium rates. At higher dosage, it acts as a retarding plasticiser. The amount of retardation will also depend on chemical composition of the cement and concrete temperature.
SBS 2511 GA(S) is an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA(S) conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA(S) results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA(S) helps in increasing the mill output at same cement fineness.
FAIRFLO S-NCC is supplied as brown liquid based on modified sulphonated Nepthalene slump retainer polymer. The powerful dispersing agent of the high range water reducing super plasticizer can be used in many ways to obtain dense, high strength durable concrete (M35, M40, M45 M50). The high water reduction properties makes of FAIRFLO S-NCC an ideal application in precast concrete where high early strength is of paramount importance. FAIRFLO S-NCC is chloride free.
FAIRFLO SN (M) is a carboxylated acrylic ether co-polymers based super plasticizer, prominent among the new age super plasticizer. This polycarboxylate super- plasticizer is a chemical admixture. In addition to increased workability or high level water reduction, FAIRFLO SN (M) provide for extended workability without set retardation. The slump retention characteristics is remarkable, with high efficiency in giving a workable mix for longer period. Although workability is maintained for longer time period, the setting time is only slightly greater than plain concrete. In addition, this admixture gives more cohesive mix & very much suited to pumping of concrete. We present below one of the test report of trial conducted in our laboratory.
SBS 2511 GA 3K is an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA 3K conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA 3K results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA 3K helps in increasing the mill output at same cement fineness.
SBS 2511 GA 3L is a non-chloride based an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA 3L conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA 3L results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA 3L helps in increasing the mill output at same cement fineness.
FAIRCRETE W(SPL) is a special polymer based innovative multi purpose plasticizer and specially developed for semi dry concrete mixes. The special polymer and plasticizer can be used in many ways to obtain dense high strength durable concrete.
FAIRCRETE W(SPL) fully exploits the accelerates hydration of cement resulting in higher early strengths and shorter curing time.
FAIRCRETE AE FOAM is a highly concentrated foaming agent for use in producing controlled low strength materials cementitious mixture (mortar, concrete, grout) for numerous application. It is conforming to BS 5075 & ASTM C- 869 Type.
SPRAYCRETE L is a chloride free accelerating admixtures supplied in liquid form, specially developed and designed to meet the demand for efficient and multifold properties desired for guniting job site. It accelerates the rate of hardening gives perfect water proofing, and has excellent bonding properties which reduces the wastage during guniting, shotcreting or sprayed jobs. A thick layer can be caste in single operation.
Guniting using SPRAYCRETE L, the reactive component of the admixture combines with cement particles thereby making the mortar or concrete rock hard in minutes of jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cements.
FAIRADD S is a combination of an expanding and plasticising agent. The expanding agent, generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The plasticising agent enables high workability mixes to be produced with relatively low water/cement ratio. Stability and cohesion of the grout is greatly increased. The expansion is controlled to avoid excess built up that is sufficient to provide high bonding of the grout to the contact surfaces with the absence of voids.
It confirming to BS 8110 Part-1 : 1985, Section 8.9.4.6.
SBS 2511 GA 3NK is a chloride free additive based and an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA 3NK conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA 3NK results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA 3NK helps in increasing the mill output at same cement fineness.
FAIRBOND PVA is a highly specialized co-acrylic polymeric waterproofing compound designed for use with cement compositions. It is used in mortar and concrete as an admixture to increase resistance to ingress of moisture/water , wear resistance and durable material.
It is used with cement as a reliable water-resistant bonding agent.
FAIRCRETE RMC2 is supplied as brown liquid based on sulphonated Nepthalene. The powerful dispersing action of the superplasticiser can be used in many ways to obtain dense, high strength, durable concrete (M350, M400 and M450). The high water reduction upto 30% make FAIRCRETE RMC2 ideal for application in precast concrete where high early strength is of paramount importance. FAIRCRETE RMC2 is chloride free.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRFLO SN is a carboxylated acrylic ether co-polymers based super plasticizer, prominent among the new age super plasticizer. This polycarboxylate super- plasticizer is a chemical admixture. In addition to increased workability or high level water reduction, FAIRFLO SN provide for extended workability without set retardation. The slump retention characteristics is remarkable, with high efficiency in giving a workable mix for longer period. Although workability is maintained for longer time period, the setting time is only slightly greater than plain concrete. In addition, this admixture gives more cohesive mix & very much suited to pumping of concrete. We present below one of the test report of trial conducted in our laboratory.
CEMSCREED FAST REPAIR SPECIAL is a ready to use cement based single component shotcrete mortar modified with micro silica. The formulation is designed to match the requirements for a dry process shotcrete applied mortar. It gives high early strength, reduced rebound and maximum application thickness, coupled with resistivity values commensurate with accepted criteria for cathodic protection overlays.
SPRAYCRETE is supplied in powder form, specially developed and designed to meet the demand for efficient and multifold properties desired at guniting job sites. It is suitable admixture for guniting and shotcreting operations. Accelerates the rate of hardening gives perfect water proofing. It have excellent bonding properties which reduces the wastage during operation of guniting, shotcreting or sprayed job, can be do a thick layer in single operation.
By guniting with adding the admixture, it accelerats the hardening process by the reactive components rapidly combine with cement particles to setting and hardening process thereby making the mortar or concrete rock hard in minutes after jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cement.
SBS 2511 GA(P) is a non-chloride based an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA (P) conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA (P) results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA(P) helps in increasing the mill output at same cement fineness.
FAIRCRETE AR is designed for use as a bonding aid & gauging liquid for cementitious systems and is a modified acrylic emulsion. It can also be used for external applications as it hydrolyses.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRCRETE SB complies to BS 6319.
FAIRFLO SN (M) is a carboxylated acrylic ether co-polymers based super plasticizer, prominent among the new age super plasticizer. This polycarboxylate super- plasticizer is a chemical admixture. In addition to increased workability or high level water reduction, FAIRFLO SN (M) provide for extended workability without set retardation. The slump retention characteristics is remarkable, with high efficiency in giving a workable mix for longer period. Although workability is maintained for longer time period, the setting time is only slightly greater than plain concrete. In addition, this admixture gives more cohesive mix & very much suited to pumping of concrete. We present below one of the test report of trial conducted in our laboratory.
SBS 2511 GA 3K is an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA 3K conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA 3K results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA 3K helps in increasing the mill output at same cement fineness.
SBS 2511 GA 3L is a non-chloride based an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA 3L conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA 3L results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA 3L helps in increasing the mill output at same cement fineness.
FAIRCRETE W(SPL) is a special polymer based innovative multi purpose plasticizer and specially developed for semi dry concrete mixes. The special polymer and plasticizer can be used in many ways to obtain dense high strength durable concrete.
FAIRCRETE W(SPL) fully exploits the accelerates hydration of cement resulting in higher early strengths and shorter curing time.
FAIRCRETE AE FOAM is a highly concentrated foaming agent for use in producing controlled low strength materials cementitious mixture (mortar, concrete, grout) for numerous application. It is conforming to BS 5075 & ASTM C- 869 Type.
SPRAYCRETE L is a chloride free accelerating admixtures supplied in liquid form, specially developed and designed to meet the demand for efficient and multifold properties desired for guniting job site. It accelerates the rate of hardening gives perfect water proofing, and has excellent bonding properties which reduces the wastage during guniting, shotcreting or sprayed jobs. A thick layer can be caste in single operation.
Guniting using SPRAYCRETE L, the reactive component of the admixture combines with cement particles thereby making the mortar or concrete rock hard in minutes of jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cements.
FAIRADD S is a combination of an expanding and plasticising agent. The expanding agent, generates gas during the hydration process before the initial set takes place, counteracts the natural settlement and shrinkage of the grout. The plasticising agent enables high workability mixes to be produced with relatively low water/cement ratio. Stability and cohesion of the grout is greatly increased. The expansion is controlled to avoid excess built up that is sufficient to provide high bonding of the grout to the contact surfaces with the absence of voids.
It confirming to BS 8110 Part-1 : 1985, Section 8.9.4.6.
SBS 2511 GA 3NK is a chloride free additive based and an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA 3NK conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA 3NK results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA 3NK helps in increasing the mill output at same cement fineness.
FAIRBOND PVA is a highly specialized co-acrylic polymeric waterproofing compound designed for use with cement compositions. It is used in mortar and concrete as an admixture to increase resistance to ingress of moisture/water , wear resistance and durable material.
It is used with cement as a reliable water-resistant bonding agent.
FAIRCRETE RMC2 is supplied as brown liquid based on sulphonated Nepthalene. The powerful dispersing action of the superplasticiser can be used in many ways to obtain dense, high strength, durable concrete (M350, M400 and M450). The high water reduction upto 30% make FAIRCRETE RMC2 ideal for application in precast concrete where high early strength is of paramount importance. FAIRCRETE RMC2 is chloride free.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRFLO SN is a carboxylated acrylic ether co-polymers based super plasticizer, prominent among the new age super plasticizer. This polycarboxylate super- plasticizer is a chemical admixture. In addition to increased workability or high level water reduction, FAIRFLO SN provide for extended workability without set retardation. The slump retention characteristics is remarkable, with high efficiency in giving a workable mix for longer period. Although workability is maintained for longer time period, the setting time is only slightly greater than plain concrete. In addition, this admixture gives more cohesive mix & very much suited to pumping of concrete. We present below one of the test report of trial conducted in our laboratory.
CEMSCREED FAST REPAIR SPECIAL is a ready to use cement based single component shotcrete mortar modified with micro silica. The formulation is designed to match the requirements for a dry process shotcrete applied mortar. It gives high early strength, reduced rebound and maximum application thickness, coupled with resistivity values commensurate with accepted criteria for cathodic protection overlays.
SPRAYCRETE is supplied in powder form, specially developed and designed to meet the demand for efficient and multifold properties desired at guniting job sites. It is suitable admixture for guniting and shotcreting operations. Accelerates the rate of hardening gives perfect water proofing. It have excellent bonding properties which reduces the wastage during operation of guniting, shotcreting or sprayed job, can be do a thick layer in single operation.
By guniting with adding the admixture, it accelerats the hardening process by the reactive components rapidly combine with cement particles to setting and hardening process thereby making the mortar or concrete rock hard in minutes after jetting. It reduces the loss of material caused by rebound, thus reducing the cost. It can be used with all types of cement.
SBS 2511 GA(P) is a non-chloride based an aqueous solution of an amine acetate salt and is an effective dispersant particularly developed for use as a grinding aid for Portland cement and other hydraulic cements. SBS 2511 GA (P) conforms to ASTM C 465. It helps in improving the efficiency of the grinding process by reducing the surface energy forces that causes agglomeration of the newly fractured cement particles. It is effective in both open circuit and closed circuit cement mills. The improved flow ability of cements with SBS 2511 GA (P) results in faster loading and unloading times of bulk tankers. Also, it helps in increasing the bulk density of cement and helps in providing increased storage capacities of silos and bulk tankers. However, it is recommended to dilute with 5 parts of water or more to ensure greater proportioning accuracy and better additive distribution. SBS 2511 GA(P) helps in increasing the mill output at same cement fineness.
FAIRCRETE AR is designed for use as a bonding aid & gauging liquid for cementitious systems and is a modified acrylic emulsion. It can also be used for external applications as it hydrolyses.
FAIRCRETE FBR is a polymer specially formulated for use with cement formulation. It is design to improve the quality of site-batched cementitious mortars and slurries.
FAIRCRETE SB complies to BS 6319.
FAIRFIBRE P is a specially designed polyester fibre which instantly disperses out through the mix and improves and increases the compressive & tensile strength of concrete and mortar. It highly improves the durability of structure and prevents the shrinkage cracks which are developed during curing making the concrete structure and plaster stronger. It prevents moisture from entering throughout the concrete and mortar structures. Also, FAIRFIBRE P works as a secondary reinforcement in concrete.
FAIRCRETE RMC1 is a high performance concrete plasticiser based on modified lignosulphonates. The powerful dispersing action of FAIRCRETE RMC1 can be used to obtain dense, high strength, durable concrete (M 15, M 20, M 25).
This power point presentation gives you information about the various chemicals, admixtures used to repair members and improve the properties of concrete. it gives you information about the various types of concrete. it gives you information about the various methods of repair.
This presentation has been prepared by civil engineering students of Tolani Foundation Gandhidham Polytechnic:
DHAWANI LAVISH
GAYAKWAD TEJAS
GORASIYA MAYUR
HIRANI YATIN
KATARMAL DARSHAN
LALWANI PIYUSH
MALI VISHNU
PATEL PARTH
PRAJAPATI JAYESH
PRAJAPATI KALPESH
Thank You!!
CEMSCREED R is a prepacked two component system consisting of ready to use polymer modified mortar and polymer modified primer. The mortar contains specially processed cement and polymer with graded fillers and additives to impart adhesion, strength and weather resistance. CEMSCREED R is designed for cost effective repairs to spalled or damaged concrete and floors. CEMSCREED R is ready to use for easy on-site mixing. The mortar can be laid in thickness of 10-20 mm in single application and exhibits good workability and finishing properties. CEMSCREED R has excellent adhesion to substrate and exhibits excellent bond & weather resistance thus leading to increased durability and also resists shrinkage induced cracking.
Styrene butadiene rubber based multipurpose adhesiveDevrajsinh Gohil
CETCRETE SBR is a styrene butadiene polymer based latex specialty developed to form matrix cement. It is used in mortar and concrete as an admixture to increase water resistance, wear resistance and durability.
Advantages:
Excellent bonding old to new concrete.
Improved tensile & flexural strength.
High resistance to water penetration
Increases durability and toughness.
The project was undertaken to design M50 grade concrete using GGBS cement and POZZOLANA cement and comparing the fresh concrete and hard concrete properties with concrete designed using conventional cement.
FLOWGROUT 60 (M) is a single pack, ultra high strength, free flowing, non-shrink grout. FLOWGROUT 60 (M) is a blend of specially processed cement and special fillers, free from corrosive substances and additives. FLOWGROUT 60 (M) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (M) is suitable for gap widths between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (M) resin grout can be used (see separate data sheet for more information) for thickness in excess of 50mm.
FLOWGROUT 60 (S) is based on specially processed cement containing fillers and additives. FLOWGROUT 60 (S) is supplied as ready to use grout requiring addition of precise quantity of water at site (3.750 to 4 Litre/25 Kg Grout). FLOWGROUT 60 (S) is suitable for gap widths of between 10mm - 50mm. For width less than 10mm FLOWGROUT 60 (S) can be used (see separate data sheet for more information) for thickness in excess fo 50mm. (say 75-100), cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
FLOWGROUT 60 is a single pack ready to use, ultra high strength, free flowing, non shrink grout. FLOWGROUT 60 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS:1881 Part-116, 1983, BS:4551, 1980 and ASTM C 469-83, ASTM C 940.
FLOWGROUT AG is a high strength, super flowing, large section cementitious grout. It is a blend of specially selected cement, silica, aggregates and additives, when mixed with water. It produces a consistent, reliable, non-shrink, ultra high strength large section grout.
FLOWGROUT AG complies to BS 6319 : Part-2 and ASTM C 157-93.
A Single pack ready to use, high strength, free flowing, non shrink grout. FLOWGROUT 40 is a blend of specially processed cement and special fillers, free from corrosive substances and additives. It confirming to BS : 1881 Part-116, 1983, BS : 4551 : 1980 and ASTM C 469-83, ASTM C 940.
FAIRGROUT is a two pack high strength, non-shrink polymer cementitious grout with both high early and ultimate strengths. FAIRGROUT has excellent flow properties and will not shrink after placing. FAIRGROUT is free from corrosive substances. FAIRGROUT is suitable for use in gap width of between 10-50 mm. In order to achieve optimum quality exposed FAIRGROUT and the outer surface of any shuttering should be protected from weather conditions for at least 12 hours. Sacks, matting, plastic sheets etc. should be placed as protection immediately after placing the grout.
FAIRADD is a plasticising, shrinkage compensating grout additive. FAIRADD is a single pack powdered admixture which when added to cement (cement : sand) produces an easy flow, high strength, shrinkage compensating grout. It is ideally suited for grouting and in-filling where a non-shrink, free-flowing product is required. FAIRADD imparts super-plasticising / high water reducing properties as well as positive expansion.
FAIRADD CG is supplied as a dry powder requiring only the addition of a controlled amount of clean water and cement to produce a free flowing non shrink grout. FAIRADD CG is an all fines admixture containing expansive cement which impart controlled expansion in the plastic state whilst minimizing water demand. The material is designed to allow uniform mixing, and eliminates unwanted segregation and bleeding.
FAIRADD CG complies to BS 1881 : Part-116, 1983 and ASTM C 827-87, ASTM C 1107 Grade C.
ANCHORGROUT can be used for high strength corrosion resistant, anchoring of bolts and a permanent installation of reinforcement doweling and starter bars, foundation bolts, base plates, hand rails, safety fences, wall tiles, railway tracks, tie back anchors and grout for tower cranes.
Due to its thixotropic nature, ANCHORGROUT can be used in vertical, horizontal and overhead situations where the hole diameter exceeds the bar diameter by not less than 4 mm and not more than 25 mm.
Where it is necessary to obtain a quick high strength fixing into concrete, brick, masonry, block-work, rock or other material of sufficient strength to take the load required of the fixing. ANCHORFIX CAPSULE can be fixed into horizontal and vertical surfaces, or overhead.
FAIRSCREED R is used to repair spalled columns, soffits, gutters, lintels etc.
It is also used for repairing of damaged concrete floors, spalled concrete roads and runways.
Used to repair damaged concrete kerbs, pipes and precast units, as a bedding mortar for tiles on uneven floors or under corrosive conditions.
FAIRSCREED PR is the name given to a range of polyester based products which will fulfill many specialist applications in the jointing, patching and repair fields of the building and civil engineering industries.
The mixing of resin and hardener starts a polymerisation process resulting in excellent mechanical properties like high compressive strength, high flexural strength, high tensile strength, corrosion resistance of cured material. The unique hardner system in the FAIRSCREED PR range enables the mix to be varied from a pourable consistency to a trowelable mortar without significantly affecting the setting times or strengths achieved. Being polyester-based, selected grades of FAIRSCREED PR will harden and cure at temperatures down to freezing point.
This wide tolerance in use makes FAIRSCREED PR almost fullproof, and because part packs and extra aggregate can be used, the material is very economical.
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel applied, four component Methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces.
FAIRMATE SILENT BREAK HSCA is a noncombustible and non-explosive material. It is safe and convenient in transportation, storage and operation. FAIRMATE SILENT BREAK HSCA is a silent demolition agent which does not cause any Vibration, noise, flying rocks, ash and hazardous gas during demolition. Demolition and cutting are allowed to be used according to working scheme. FAIRMATE SILENT BREAK HSCA can gain a high yield for mining of granite, marble etc. It is very easy to crush & remain reinforced concrete structures on demand during demolition.
FAIRMATE CARBON WRAP is based on new technology designed to completely guarantee the original structure's performance by increasing the strength, durability and vibration resistance. FAIRMATE CARBON WRAP is applied to deteriorated concrete areas on horizontally and vertically.
FAIRBOND EP SPECIAL is a general purpose two-pack solvent free epoxy resin which has been formulated especially for use with concrete. FAIRBOND EP SPECIAL has particular advantage of bonding firmly to touch damp surfaces.
FAIRBOND CS is preweighed solvent free epoxy resin system consisting of base & hardner. The components differ in colour thus allowing visual assessment of mixing.
CRACKSEAL SUPER is an easy to use, prepacked high strength, fast setting crack repair mortar, which ensures perfect filling of cracks and will not allow water penetration.
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxamilabibi1
Islamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docxIslamabad No 1 Amil Baba In Pakistan amil baba kala ilm.docx
Unlocking Insights: AI-powered Enhanced Due Diligence Strategies for Increase...RNayak3
Explore how a risk-based approach to Enhanced Due Diligence can deliver effective Anti-Money Laundering (AML) compliance and monitoring in banking and financial services.
Office Business Furnishings | Office EquipmentOFWD
OFWD is Edmonton’s Newest and most cost-effective source for Office Furnishings. Conveniently located on 170 street and 114 Avenue in Edmonton’s West End. We take pride in servicing a client base of over 500 corporations throughout the Edmonton and Alberta area. OFWD is in the business of satisfying the home or corporate office environment needs of our clients, from individual pieces of furniture for the home user to the implementation of complete turn-key projects on much larger scales. We supply only quality products from reputable manufacturers. It is our intention to continue to earn the trust of our clients by dealing with honesty and integrity and by providing service and after sales follow-up second to none.
Get your dream bridal look with top North Indian makeup artist - Pallavi KadalePallavi Makeup Artist
Achieve your dream wedding day look with renowned North Indian bridal makeup artist, Pallavi Kadale. With years of experience, her expert techniques and skills will leave you looking flawless and radiant. Book today for your perfect bridal makeover.
Experience the breathtaking beauty of a Waikiki sunset aboard the MAITAI Catamaran. Sail along the stunning coastline as the sun dips below the horizon, casting vibrant hues across the sky. Enjoy the gentle ocean breeze, refreshing drinks, and a relaxed atmosphere. This unforgettable voyage offers panoramic views of Diamond Head and the Waikiki skyline, making it the perfect way to end your day in paradise. Join us for a memorable sunset cruise you won't forget. Please visit our website: https://www.maitaicatamaran.net/ and call us at 808-922-5665 for additional information.
Are Gutters Necessary? Explore the details now!AmeliaLauren3
Gutters are typically installed at a slight downward slope to allow water to flow freely towards downspouts or drains – the downspout being the vertical pipe attached to the gutters. The water is subsequently transported by the downspout to either the ground or an underground drainage system. Maintaining a gutter system that is free of blockages and functional requires regular maintenance.
But, many wonder in what situations gutters are required and not required. In this ppt we will discuss in detail the matter, ‘Are Gutters Necessary?’
In the competitive realm of online business, visibility is key, and search engine optimization (SEO) serves as the cornerstone of digital prominence. As the demand for effective SEO solutions continues to soar, finding the best SEO company in Perth becomes imperative. Enter Simba Squad – a dynamic force dedicated to propelling your business to new heights of success.
BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem sol...gitapress3
TOP No AsTro 1 black magic SpecialiSt UK baba ji +91-9463629203 VashIkaRan blaCk maGiC specialist in uSA Uk England Luxembourg CanAdA America BEst VASHIKARAN SPECIALIST 9463629203 in UK Baba ji Love Marriage problem solution Uk USA america england LonDon Divorce problem solution astroloGer
Looking for the Reliable Logistics Solutions in India? Discover unparalleled efficiency and reliability with our top-rated logistics services. We specialize in streamlining supply chains, ensuring timely deliveries, and providing cutting-edge tracking solutions. Our platform caters to businesses of all sizes, offering customizable logistics solutions to meet your unique needs. With a focus on innovation and customer satisfaction, we are your trusted partner in navigating the complexities of logistics in India. Choose us for seamless, cost-effective, and scalable logistics solutions. Experience the best in Indian logistics with our expert team by your side.
What Are the Latest Trends in Endpoint Security for 2024?VRS Technologies
In this PDF, Discover the top 2024 endpoint security trends, including zero trust, AI integration, XDR, cloud security, and enhanced mobile protection. VRS Technologies LLC supplies the top level Endpoint Security Service Dubai. For More Info Contact us: +971 56 7029840 Visit us: https://www.vrstech.com/endpoint-security-solutions.html
SMS2ORBIT | launched in 2022 in Mumbai's Andheri area, aims to be the most reliable Bulk SMS Service Provider in Mumbai.
If More Information About The SMS Service Provided By SMS2ORBIT Is Desired, Please Don’t Hesitate To Contact The Business Team. They Can Be Reached At
business@sms2orbit.com Or By Calling 97248 55877.
Solar power panels, also known as photovoltaic (PV) panels, convert sunlight into electricity, offering a renewable and sustainable energy solution. Composed of semiconductor materials, typically silicon, these panels absorb photons from sunlight, generating an electric current through the photovoltaic effect. This clean energy source reduces dependence on fossil fuels, mitigates greenhouse gas emissions, and contributes to environmental sustainability.
Maximizing Efficiency with Integrated Water Management SystemsIrri Design Studio
Integrated water management systems are essential for improving irrigation design sustainability and efficiency. Irri Design Studio helps customers maximize water consumption, reduce waste, and encourage responsible stewardship of water resources by utilizing cutting-edge technology like drone-based construction updates and BIM modeling. The increasing issues of water shortage and environmental protection require an all-encompassing strategy to water management. Irrigation systems may be planned to optimize water consumption efficiency while guaranteeing the safety of people and the environment by putting new ideas and concepts into practice. Visit our website https://www.irridesignstudio.com/ for more information.
Delightful Finds: Unveiling the Power of Gifts Under 100JoyTree Global
Stretch your budget and spread joy! This guide explores the world of gifts under 100, proving thoughtful gestures don't require a hefty price tag. Discover unique and practical options for birthdays, holidays, or simply showing someone you care. Find inspiration for every occasion within your budget!
Nature’s Paradise Glamorous And Sustainable Designs For Your Outdoor Living S...Landscape Express
Create a harmonious blend of luxury and sustainability in your outdoor living space with eco-friendly kitchens, enchanting water features, and lush plant landscaping. Embrace energy-efficient appliances, solar lighting, rainwater harvesting, and native plants to enhance beauty while reducing environmental impact. Transform your space into a glamorous, eco-conscious retreat for relaxation and social gatherings.
BesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand...gitapress3
love problem solution astrologer
best love problem solution astrologer
online love problem solution astrologer
love problem solution astrologer in india
love problem solution astrologer in kolkata
love problem solution astrologer near me
love problem solution astrologer in ludhiana
love problem solution astrologer acharya ji
love problem solution astrologer in delhi
love problem solution astrologer amritsar
astrologer love problem solution
astrologer for love problem
astrology love problem solution
love solution astrologer
love problem solution specialist astrologer
love problem solution by astrologer
astrology love problem solution baba ji
love problem solve astrologer
love problem solution usa
love problem solution expert astrologer
astrologer for love marriage problem solution
love problem solution astrologer in mumbai
love problem solution muslim astrologer
love marriage specialist astrologer problem solution
famous love astrologer
love problem solution astrologer specialist
love problem solution astrologer tantrikBesT panDit Ji LoVe problem solution 9463629203 UK uSA California New Zealand baba ji LoVe marriage specialist Uk USA LonDOn panDit ji
How Does Littering Affect the Environment.ClenliDirect
Read this PPT now to gain in-depth insights into how to fight litter and safeguard our landscapes from its negative impacts.
Visit-https://clenlidirect.com/cleaning-equipment/litter-picker-grabber-equipment.html
2. Benefits
It is simple to use white liquid single component.
Provide excellent bond strength to hardened concrete, plaster, masonry, etc.
Increase flexural strength & tensile strength.
Improves durability and gives weather resistant mortar with improved
impermeability to chlorides and other harmful agents.
Reduce shrinkage & water permeability and also reduces cracking through
increased mortar flexibility.
FAIRCRETE SBR is economical to use.
High Adhesion : Provides excellent bond to concrete, plaster, masonry, stone
work, etc.
Good resistance to many chemicals as well as mineral oil.
Versatile : Compatible with all common hydraulic cements.
Prevents bleeding.
3. Uses
FAIRCRETE SBR can be used as a bonding agent for concrete repair
mortars and mortars, for improving bonding of floor toppings, damaged
concrete, repair of large cracks. It can be also used for polymer modified
floor screeds, waterproof plasters for masonry and slurries.
4. Description
FAIRCRETE SBR is a single component white emulsion polymer specially
designed for use as a bonding aid and for cementitious systems. It is
resistant to hydrolysis and can therefore be used for external applications
too.