The document discusses Ardex 'Rapidry Formula' cement systems for flooring. It describes how products with the Rapidry Formula logo incorporate unique technology allowing them to totally bind water during mixing. This enables rapid hardening and drying of screeds and toppings regardless of thickness. It also eliminates the risk of discoloration when fixing natural stone. Several Ardex cement products are then described including screeds, self-leveling compounds, primers, and a car park system.
This presentation discusses plastering and provides details on materials, tools, types of plaster, and procedures. It introduces plastering as a process of covering rough surfaces with a plastic material to create smooth, durable coatings. The main types of plaster covered are lime, cement, mud, and stucco plaster. Procedures for cement plastering including surface preparation, application of preliminary, first, and second coats are outlined. Common plastering issues like cracking, efflorescence, filling out, and blowing are defined along with solutions. Advantages of durability and ease of application are balanced with disadvantages of repair costs and potential for cracking.
Chapter 4 (d) hollow concrete block masonryKHUSHBU SHAH
The document discusses hollow concrete blocks used in construction. Some key points:
- Hollow concrete blocks are large rectangular bricks made of Portland cement, sand, and gravel aggregates. They come in various standard sizes for different uses.
- Blocks are manufactured using a cement to aggregate ratio of 1:6, with sand and gravel aggregates sized 6-12mm. They are molded, cured for 7 days, and should have a minimum compressive strength of 4N/mm2.
- Advantages of hollow concrete block masonry include lighter weight for easier handling, faster construction, and increased floor area due to thinner walls.
This document describes the properties of bricks, including their physical, mechanical, and thermal characteristics. It discusses the shape, size, color, density, compressive strength, insulation properties, durability, and frost resistance of standard bricks. It also outlines various tests conducted on bricks, such as those measuring compressive strength and water absorption. Additionally, it defines the qualities of good bricks and provides a classification system for bricks based on their characteristics and intended uses. Special types of bricks are also outlined, including those with modified shapes, perforations, and alternative compositions like sand lime bricks and refractory fire bricks.
Plastering involves applying plaster, a mixture of lime or gypsum, sand, and water, to rough or uneven surfaces to make them smooth. The objectives of plastering are to provide an even, durable finished surface and protect the underlying structure. Several tools are used in plastering including trowels, floats, and hawks. There are different types of plaster like lime, cement, mud, and stucco plaster. Cement plaster is suited for damp conditions while lime plaster uses lime as the binding agent. Issues that can arise with plaster include cracking, efflorescence, plaster falling out, and blowing.
This document provides information on different types of floor finishes. It discusses the structure and components of a floor. It then describes various flooring materials like stone, tile, terrazzo, brick, cement concrete and timber flooring. For each material, it provides details on their manufacture, sizes, properties, advantages and uses. Stone flooring discussed in detail includes marble, granite and kota stone. For tiles, both ceramic and vitrified tiles are explained. Mosaic and terrazzo flooring techniques are also summarized.
Plastering Defination of plastering : The word “plaster” comes from the Greek language meaning “to daub on”. This is the process of covering rough surfaces with a plastic material to obtain an even, smooth, regular, clean & durable surfaces. On the other hand we say that; A mixture of lime or gypsum, sand and water,...
slideshare ppt download
slideshare presentations
stroke ppt slideshare
download slideshare ppt online
slideshare powerpoint
iot ppt slideshare
The document discusses the different types of floors used in buildings. It describes floors as horizontal structural elements that divide a building into levels. Floors are categorized based on their level (ground or suspended), material used (cement, stone, tiles, wood, etc.), and other factors. The key components of a floor are identified as the sub-floor, base, and finished floor. Various stone, tile, resilient, terrazzo, and wood floor options are outlined. Economy is noted as a consideration, as finishing costs can exceed initial estimates.
This presentation discusses plastering and provides details on materials, tools, types of plaster, and procedures. It introduces plastering as a process of covering rough surfaces with a plastic material to create smooth, durable coatings. The main types of plaster covered are lime, cement, mud, and stucco plaster. Procedures for cement plastering including surface preparation, application of preliminary, first, and second coats are outlined. Common plastering issues like cracking, efflorescence, filling out, and blowing are defined along with solutions. Advantages of durability and ease of application are balanced with disadvantages of repair costs and potential for cracking.
Chapter 4 (d) hollow concrete block masonryKHUSHBU SHAH
The document discusses hollow concrete blocks used in construction. Some key points:
- Hollow concrete blocks are large rectangular bricks made of Portland cement, sand, and gravel aggregates. They come in various standard sizes for different uses.
- Blocks are manufactured using a cement to aggregate ratio of 1:6, with sand and gravel aggregates sized 6-12mm. They are molded, cured for 7 days, and should have a minimum compressive strength of 4N/mm2.
- Advantages of hollow concrete block masonry include lighter weight for easier handling, faster construction, and increased floor area due to thinner walls.
This document describes the properties of bricks, including their physical, mechanical, and thermal characteristics. It discusses the shape, size, color, density, compressive strength, insulation properties, durability, and frost resistance of standard bricks. It also outlines various tests conducted on bricks, such as those measuring compressive strength and water absorption. Additionally, it defines the qualities of good bricks and provides a classification system for bricks based on their characteristics and intended uses. Special types of bricks are also outlined, including those with modified shapes, perforations, and alternative compositions like sand lime bricks and refractory fire bricks.
Plastering involves applying plaster, a mixture of lime or gypsum, sand, and water, to rough or uneven surfaces to make them smooth. The objectives of plastering are to provide an even, durable finished surface and protect the underlying structure. Several tools are used in plastering including trowels, floats, and hawks. There are different types of plaster like lime, cement, mud, and stucco plaster. Cement plaster is suited for damp conditions while lime plaster uses lime as the binding agent. Issues that can arise with plaster include cracking, efflorescence, plaster falling out, and blowing.
This document provides information on different types of floor finishes. It discusses the structure and components of a floor. It then describes various flooring materials like stone, tile, terrazzo, brick, cement concrete and timber flooring. For each material, it provides details on their manufacture, sizes, properties, advantages and uses. Stone flooring discussed in detail includes marble, granite and kota stone. For tiles, both ceramic and vitrified tiles are explained. Mosaic and terrazzo flooring techniques are also summarized.
Plastering Defination of plastering : The word “plaster” comes from the Greek language meaning “to daub on”. This is the process of covering rough surfaces with a plastic material to obtain an even, smooth, regular, clean & durable surfaces. On the other hand we say that; A mixture of lime or gypsum, sand and water,...
slideshare ppt download
slideshare presentations
stroke ppt slideshare
download slideshare ppt online
slideshare powerpoint
iot ppt slideshare
The document discusses the different types of floors used in buildings. It describes floors as horizontal structural elements that divide a building into levels. Floors are categorized based on their level (ground or suspended), material used (cement, stone, tiles, wood, etc.), and other factors. The key components of a floor are identified as the sub-floor, base, and finished floor. Various stone, tile, resilient, terrazzo, and wood floor options are outlined. Economy is noted as a consideration, as finishing costs can exceed initial estimates.
This document provides information on the manufacturing process of tiles. It discusses the four main stages: preparation of clay, moulding, drying, and burning.
For the preparation of clay, suitable clay is extracted, crushed, and mixed into a homogeneous mixture using a pug mill. There are three main moulding methods: wooden pattern, potter's wheel, and machine moulding. Tiles are then dried under a shed to protect from weather.
Burning is the final and most important stage. Tiles are stacked in kilns and fired at increasing temperatures over 72 hours to vitrify the tiles. Proper temperature control is crucial. The document also discusses various tile types like floor, roof
Waterproofing is done to prevent water from penetrating buildings. It involves applying membrane barriers like bitumen or PVC during construction. It can also be done later to address leaks. Common areas waterproofed include bathrooms, terraces, basements, and roofs. Materials used include cement, sand, metal chips, brick bats, and waterproofing chemicals. Techniques include applying cement coats sloped away from the building, with brick bats or tiles in between coats. Thorough preparation and multiple curing coats are important for effective waterproofing.
The document discusses various types of flooring materials including hard flooring like wood, stone and tile as well as soft flooring like carpet and resilient flooring. It provides details on different material options for flooring like concrete, wood, bamboo, laminate, linoleum and vinyl. It also discusses flooring installation and maintenance considerations as well as factors that influence material selection like cost, durability and moisture levels.
Glass as building material covered all the glasses with best and suitable examples
Please like share and subscribe to my Youtube channel
https://www.youtube.com/channel/UCaUEYWPKaJItDDLpc-ZOl4w
Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. Another imprecise term used for the material is stucco, which is also often used for plasterwork that is ...
plastering contractors near me
interior plastering techniques
plastering walls
how to do plastering
pool plastering companies near me
plastering walls techniques
plastering drywall
plastering ceilings
types of plaster wall construction
types of plastering techniques
types of plaster ceiling finishes
methods of plastering
different kinds of plaster
interior plastering techniques
plaster types and uses
different types of plaster walls
types of plastering techniques
types of interior plaster
plaster types and uses
different kinds of plaster
types of plaster ceiling finishes
different plaster wall finishes
how are plaster walls constructed
cement plaster finish types
different types of plaster finishes
types of interior plaster
types of plastering techniques
plaster types and uses
types of plaster ceiling finishes
types of plaster ceilings
types of plaster of paris
plaster supply stores
this is a detailed research on ceramic tiles; their raw materials, construction and making, installation, advantages and much more. it explains in details about the process and production of ceramic tiles.
This document discusses causes, effects, and methods of preventing dampness in buildings. It outlines several precautions that should be taken such as proper site drainage and wall thickness. Common causes of dampness include rising moisture, rain penetration, and poor drainage. Effects include breeding mosquitoes and damage to building materials. Methods of damp proofing discussed are damp proof courses, waterproof surface treatments, integral treatments during construction, cavity walls, and cement grouting of cracks. Specific materials used for damp proof courses like bitumen and mastic asphalt are also outlined.
The document discusses various surface finishing techniques used to protect and decorate building materials. It describes the purpose of surface finishes as protecting surfaces from weathering, providing a smooth appearance, and creating an aesthetically pleasing look. Several types of plasters, paints, and washes are used as covering materials. The document also defines important technical terms related to surface finishes and plastering techniques, including cement plastering, lime plastering, mud plastering, stucco plastering, and moghul plastering. It provides details on applying coats, curing times, and suitability of each plastering method. Pointing and different types of joints in buildings are also summarized.
It is used as a mould for a structure in which fresh concrete is poured only to harden subsequently.
formwork for concrete slab
beam formwork
steel formwork
doka h20
types of formwork
formwork for concrete
what is formwork in construction
building formwork
plywood disadvantages
advantage plywood
advantages and disadvantages of wood
best plywood for formwork
plywood formwork for concrete
mdf advantages and disadvantages
examples of advantages and disadvantages
advantage steel and construction
advantages of steel
disadvantages of steel structures
examples of advantages and disadvantages
advantages and disadvantages of surveys
wiki advantages and disadvantages
steel formwork design
steel formwork system
This document provides information about finishing works for a construction workshop group project. It discusses ceiling, wall, floor, door, window, electrical, and paint finishing. Ceiling finishing involves processes like ceving, plastering using mortar, and leveling. Wall finishing includes plastering, applying tiles, and types of tiles. Floor finishing consists of net cement finish, tile installation, and marble/granite flooring. Painting processes and types are also outlined.
A presentation on various types of tile rooifing materials and techniques for the course Appropriate Techniques from students of 4th Semester Architecture at VNIT, Nagpur (Jan-March 2015)
Pointing - the technique of repairing mortar joints between bricks or other masonry elements.
Finishing - a fine job in building construction process
where it forms the beauty of a building.
1. Plastering is done for protection, smooth surfaces, decoration, and to conceal defects. Requirements include adhesion, affordability, hardness, and workability.
2. Common plaster types include sand faced, rough cast, pebbled dash, and smooth cast.
3. Defects can include blistering, cracking, efflorescence, flaking, peeling, and popping. Cracking is caused by structural issues or drying movements.
This document discusses various methods of damp-proofing and waterproofing buildings. It defines damp-proofing as preventing moisture from rising through walls, floors, and basements, while waterproofing refers to preventing water leakage from roofs. Common sources of dampness include rising ground moisture, rain splashing, and poor drainage. Dampness can cause issues like efflorescence, plaster damage, and mold growth. Methods of damp-proofing discussed include membrane barriers like bitumen and plastic sheets, integral waterproof concrete additives, and surface treatments to fill pores. Flexible, semi-rigid and rigid damp proof course materials are also outlined.
Wood flooring is made from timber and designed for use as flooring. It is a common choice due to its environmental profile, durability, and ability to be restored. There are two main types: solid wood flooring made from a single piece of timber, and engineered wood flooring composed of two or more wood layers for increased stability. Wood flooring provides acoustic benefits, natural beauty, sustainability as a renewable material, and good insulation properties. It requires regular maintenance like polishing but can last a lifetime if properly cared for.
The document discusses different types of flooring materials and their construction. It describes the key components of flooring as the sub-floor or base course, and floor covering. Common materials used include cement concrete, lime concrete, stones, bricks and wood. The selection of flooring depends on factors like initial cost, appearance, durability, damp and fire resistance. Specific flooring types discussed include mud, muram, brick, flagstone, cement concrete, terrazzo, mosaic and tile flooring.
Formwork refers to the temporary structure used to support wet concrete until it is cured. There are different types of formwork including wood and steel. Wood formwork uses props, planks, battens and sheeting while steel uses sheets, angles and tees. Formwork must be strong, waterproof, and allow concrete to harden to the required strength before removal. The timing of removal depends on concrete mix design and weather conditions. Formwork is an important part of concrete construction and can account for 20-60% of the total concrete cost.
Presentation on Brick Masonry, Paint and PlasteringAbontee
This document is the presentation slides for a group project on brick masonry, paint, and plastering. It includes an introduction slide with the group members' names. It then covers topics such as the definitions of masonry, brick masonry, types of bricks, bonding patterns, plastering materials and types, paint constituents, and defects and their remedies. Diagrams are provided to illustrate brickwork terminology, masonry joints, bond patterns, and plastering tools.
SUPERCAP FAST is a cement-based, self-leveling underlayment that develops high early strength. It can be applied over concrete, wood, and other rigid flooring substrates 1 day to 5 days before installing flooring. SUPERCAP FAST has advantages like early walkability within 2-4 hours, ability to install flooring after 1 day at 1/4" thickness, and contributing no mold growth. It has high compressive and bond strengths according to tests. The document provides instructions on mixing and applying SUPERCAP FAST over various substrate types.
Advanced Materials Corporation was founded in 1997 and later changed its name to NOVTEK CORPORATION to align with its well-known brand name in the construction industry. NOVTEK is now one of the leading manufacturers of construction materials in the Philippines and China, offering innovative products like tile adhesives, grouts, mortars, and waterproofing solutions. Through nationwide dealers and technical support, NOVTEK aims to supply high-quality products to the growing construction market.
This document provides information on the manufacturing process of tiles. It discusses the four main stages: preparation of clay, moulding, drying, and burning.
For the preparation of clay, suitable clay is extracted, crushed, and mixed into a homogeneous mixture using a pug mill. There are three main moulding methods: wooden pattern, potter's wheel, and machine moulding. Tiles are then dried under a shed to protect from weather.
Burning is the final and most important stage. Tiles are stacked in kilns and fired at increasing temperatures over 72 hours to vitrify the tiles. Proper temperature control is crucial. The document also discusses various tile types like floor, roof
Waterproofing is done to prevent water from penetrating buildings. It involves applying membrane barriers like bitumen or PVC during construction. It can also be done later to address leaks. Common areas waterproofed include bathrooms, terraces, basements, and roofs. Materials used include cement, sand, metal chips, brick bats, and waterproofing chemicals. Techniques include applying cement coats sloped away from the building, with brick bats or tiles in between coats. Thorough preparation and multiple curing coats are important for effective waterproofing.
The document discusses various types of flooring materials including hard flooring like wood, stone and tile as well as soft flooring like carpet and resilient flooring. It provides details on different material options for flooring like concrete, wood, bamboo, laminate, linoleum and vinyl. It also discusses flooring installation and maintenance considerations as well as factors that influence material selection like cost, durability and moisture levels.
Glass as building material covered all the glasses with best and suitable examples
Please like share and subscribe to my Youtube channel
https://www.youtube.com/channel/UCaUEYWPKaJItDDLpc-ZOl4w
Plaster is a building material used for the protective or decorative coating of walls and ceilings and for moulding and casting decorative elements. In English "plaster" usually means a material used for the interiors of buildings, while "render" commonly refers to external applications. Another imprecise term used for the material is stucco, which is also often used for plasterwork that is ...
plastering contractors near me
interior plastering techniques
plastering walls
how to do plastering
pool plastering companies near me
plastering walls techniques
plastering drywall
plastering ceilings
types of plaster wall construction
types of plastering techniques
types of plaster ceiling finishes
methods of plastering
different kinds of plaster
interior plastering techniques
plaster types and uses
different types of plaster walls
types of plastering techniques
types of interior plaster
plaster types and uses
different kinds of plaster
types of plaster ceiling finishes
different plaster wall finishes
how are plaster walls constructed
cement plaster finish types
different types of plaster finishes
types of interior plaster
types of plastering techniques
plaster types and uses
types of plaster ceiling finishes
types of plaster ceilings
types of plaster of paris
plaster supply stores
this is a detailed research on ceramic tiles; their raw materials, construction and making, installation, advantages and much more. it explains in details about the process and production of ceramic tiles.
This document discusses causes, effects, and methods of preventing dampness in buildings. It outlines several precautions that should be taken such as proper site drainage and wall thickness. Common causes of dampness include rising moisture, rain penetration, and poor drainage. Effects include breeding mosquitoes and damage to building materials. Methods of damp proofing discussed are damp proof courses, waterproof surface treatments, integral treatments during construction, cavity walls, and cement grouting of cracks. Specific materials used for damp proof courses like bitumen and mastic asphalt are also outlined.
The document discusses various surface finishing techniques used to protect and decorate building materials. It describes the purpose of surface finishes as protecting surfaces from weathering, providing a smooth appearance, and creating an aesthetically pleasing look. Several types of plasters, paints, and washes are used as covering materials. The document also defines important technical terms related to surface finishes and plastering techniques, including cement plastering, lime plastering, mud plastering, stucco plastering, and moghul plastering. It provides details on applying coats, curing times, and suitability of each plastering method. Pointing and different types of joints in buildings are also summarized.
It is used as a mould for a structure in which fresh concrete is poured only to harden subsequently.
formwork for concrete slab
beam formwork
steel formwork
doka h20
types of formwork
formwork for concrete
what is formwork in construction
building formwork
plywood disadvantages
advantage plywood
advantages and disadvantages of wood
best plywood for formwork
plywood formwork for concrete
mdf advantages and disadvantages
examples of advantages and disadvantages
advantage steel and construction
advantages of steel
disadvantages of steel structures
examples of advantages and disadvantages
advantages and disadvantages of surveys
wiki advantages and disadvantages
steel formwork design
steel formwork system
This document provides information about finishing works for a construction workshop group project. It discusses ceiling, wall, floor, door, window, electrical, and paint finishing. Ceiling finishing involves processes like ceving, plastering using mortar, and leveling. Wall finishing includes plastering, applying tiles, and types of tiles. Floor finishing consists of net cement finish, tile installation, and marble/granite flooring. Painting processes and types are also outlined.
A presentation on various types of tile rooifing materials and techniques for the course Appropriate Techniques from students of 4th Semester Architecture at VNIT, Nagpur (Jan-March 2015)
Pointing - the technique of repairing mortar joints between bricks or other masonry elements.
Finishing - a fine job in building construction process
where it forms the beauty of a building.
1. Plastering is done for protection, smooth surfaces, decoration, and to conceal defects. Requirements include adhesion, affordability, hardness, and workability.
2. Common plaster types include sand faced, rough cast, pebbled dash, and smooth cast.
3. Defects can include blistering, cracking, efflorescence, flaking, peeling, and popping. Cracking is caused by structural issues or drying movements.
This document discusses various methods of damp-proofing and waterproofing buildings. It defines damp-proofing as preventing moisture from rising through walls, floors, and basements, while waterproofing refers to preventing water leakage from roofs. Common sources of dampness include rising ground moisture, rain splashing, and poor drainage. Dampness can cause issues like efflorescence, plaster damage, and mold growth. Methods of damp-proofing discussed include membrane barriers like bitumen and plastic sheets, integral waterproof concrete additives, and surface treatments to fill pores. Flexible, semi-rigid and rigid damp proof course materials are also outlined.
Wood flooring is made from timber and designed for use as flooring. It is a common choice due to its environmental profile, durability, and ability to be restored. There are two main types: solid wood flooring made from a single piece of timber, and engineered wood flooring composed of two or more wood layers for increased stability. Wood flooring provides acoustic benefits, natural beauty, sustainability as a renewable material, and good insulation properties. It requires regular maintenance like polishing but can last a lifetime if properly cared for.
The document discusses different types of flooring materials and their construction. It describes the key components of flooring as the sub-floor or base course, and floor covering. Common materials used include cement concrete, lime concrete, stones, bricks and wood. The selection of flooring depends on factors like initial cost, appearance, durability, damp and fire resistance. Specific flooring types discussed include mud, muram, brick, flagstone, cement concrete, terrazzo, mosaic and tile flooring.
Formwork refers to the temporary structure used to support wet concrete until it is cured. There are different types of formwork including wood and steel. Wood formwork uses props, planks, battens and sheeting while steel uses sheets, angles and tees. Formwork must be strong, waterproof, and allow concrete to harden to the required strength before removal. The timing of removal depends on concrete mix design and weather conditions. Formwork is an important part of concrete construction and can account for 20-60% of the total concrete cost.
Presentation on Brick Masonry, Paint and PlasteringAbontee
This document is the presentation slides for a group project on brick masonry, paint, and plastering. It includes an introduction slide with the group members' names. It then covers topics such as the definitions of masonry, brick masonry, types of bricks, bonding patterns, plastering materials and types, paint constituents, and defects and their remedies. Diagrams are provided to illustrate brickwork terminology, masonry joints, bond patterns, and plastering tools.
SUPERCAP FAST is a cement-based, self-leveling underlayment that develops high early strength. It can be applied over concrete, wood, and other rigid flooring substrates 1 day to 5 days before installing flooring. SUPERCAP FAST has advantages like early walkability within 2-4 hours, ability to install flooring after 1 day at 1/4" thickness, and contributing no mold growth. It has high compressive and bond strengths according to tests. The document provides instructions on mixing and applying SUPERCAP FAST over various substrate types.
Advanced Materials Corporation was founded in 1997 and later changed its name to NOVTEK CORPORATION to align with its well-known brand name in the construction industry. NOVTEK is now one of the leading manufacturers of construction materials in the Philippines and China, offering innovative products like tile adhesives, grouts, mortars, and waterproofing solutions. Through nationwide dealers and technical support, NOVTEK aims to supply high-quality products to the growing construction market.
The document discusses MYK LATICRETE, a leader in tile and stone installation solutions. It describes their factory in Hyderabad which manufactures a range of products using advanced R&D. These include screeds, waterproofing membranes, tile adhesives, grouts, and stone care products. The factory uses state-of-the-art facilities and R&D to develop innovative solutions and new eco-friendly products.
Sample Specification for M10 Proprietary Quick Drying Levelling ScreedsFlexiDry Global Ltd
This document discusses FlexiDry, a proprietary quick drying cementitious screed that can be used for bonded, unbonded, floating, and heated screeds. It comes in options to dry in 3, 7, 14, or 21 days. The document provides details on substrate preparation, screed construction, recommended thicknesses, finishes, joints, and curing. It emphasizes mixing and application should follow the manufacturer's recommendations to achieve the desired strength and drying properties.
Sample Specification for M10 Proprietary Quick Drying Levelling ScreedsFlexiDry Global Ltd
This document discusses FlexiDry, a proprietary quick drying cementitious screed that can be used for bonded, unbonded, floating, and heated screeds. It comes in options to dry in 3, 7, 14, or 21 days. The document provides details on substrate preparation, screed construction, recommended thicknesses, finishes, joints, and curing. It emphasizes mixing and application should follow the manufacturer's recommendations to achieve the desired strength and drying properties.
Fastline Services is your one-stop-shop for line marking and safety solutions for warehousing and logistics. See the services we offer in our brochure.
Epoxy, polished concrete, vinyl, and rubber are four common types of industrial flooring. Epoxy is very durable and can handle heavy traffic and weights. Polished concrete is also durable but can be hard on employees. Vinyl is moisture resistant and comes in many colors but requires more maintenance. Rubber provides cushioning, is sound absorbent, and anti-slip, but can be easily scratched. Other industrial flooring options include cement concrete, granolithic, precast tiles, stone, and various properties and applications are discussed for each.
CEMSCREED FAST REPAIR is a cementitious fast setting mortar for repairing of concrete and plaster surfaces. CEMSCREED FAST REPAIR has been specially designed to provide a very fast set repair in concrete floors and pavements and is particularly useful where traffic must be kept flowing. CEMSCREED FAST REPAIR is supplied as a ready-to-use, blend of dry powders which requires only the site addition of water to produce a mortar consistency, non - shrink repair micro concrete. The material is based on Portland cement, graded aggregates, fillers and additives which impart controlled expansion characteristics in the plastic state while minimizing water demand.
SUPERCAP is a cement-based, self-leveling underlayment used to finish and level concrete floors before installing flooring. It can be applied over concrete, wood, and other rigid subfloors 1/4 to 2 inches thick. SUPERCAP dries quickly and flooring can be installed in as little as 1-3 days. It helps create a smooth, level surface and eliminates the need for power troweling concrete.
building products presentations part - 2JATIN61787
This document provides information on autoclaved aerated concrete (AAC), including its production process, properties, applications, and advantages over other construction materials like concrete and bricks. AAC is a lightweight, strong cellular material created when aluminum reacts with a lime, cement and fly ash blend, releasing hydrogen gas that forms tiny air pockets. It has benefits like high strength, fire resistance, acoustics, pest resistance, and is more environmentally friendly than clay bricks. The document discusses AAC products, applications, and technologies from a company that manufactures AAC blocks and dry mix products.
KRAITEC step products are elastic surfacing slabs made from recycled rubber that provide a comfortable, safe, and eye-pleasing surface for terraces, balconies, and flat roofs. The slabs simply install without glue using integrated connector pins, can be replaced individually, and are durable yet easy to clean and maintain. They are a versatile option for enhancing outdoor spaces.
This document provides information on autoclaved aerated concrete (AAC) blocks, including their properties, advantages over other building materials like concrete and bricks, and applications. AAC blocks are lightweight, strong, fire resistant and provide good insulation. They also use waste materials like fly ash and require less energy to produce than clay bricks. The document discusses AAC block production processes and gives details on jointing mortars, waterproofing solutions, plasters and other building products from the company.
This document provides information on UltraTech Cement's building products division and their product portfolio. It discusses their various cement-based products including AAC blocks, waterproofing solutions, tile adhesives, floor screeds, plasters, industrial grouts, and mortars. It provides details on the product segments, locations of BPD plants, technical specifications and parameters of their mortar and plaster range, and waterproofing solutions like Seal & Dry SBR and Weather Pro WP+. It also summarizes the uses and application areas of these products for construction purposes like plastering, tiling, waterproofing of structures.
Tekcem Supra is a cement-based binder that can be used to replace ordinary Portland cement in screeds. It allows for rapid setting and strength gain, enabling early foot traffic after 12 hours and application of floor finishes within 24 hours. Tekcem Supra must be mixed in the same way as a normal sand/cement screed, using suitable aggregates and water. It can be used for bonded, unbonded, or floating screeds for applications such as floor repair or where quick drying is needed for overlaying finishes.
DETAILED STUDY OF FOAM CONCRETE
1- MATERIALS USED
2- MACHINE USED( HAND MAKING WORKABLE EQUIPMENT FOR MIXING)
3-TESTING PROCEDURE
4- YOU GUYZ CAN ALSO LEARN THROUGH THE PHOTOGRAPHS
This document discusses plastering and dry lining techniques. It covers preparing surfaces by cleaning and roughening them to provide a good bond for plaster. Three coat plaster application is recommended for uneven surfaces, with undercoats leveling the surface and a finish coat providing a smooth surface. Undercoat mixes use coarser sand and cement ratios of 1:3 to 1:5 by volume to strengthen backgrounds without cracking. The finish coat is applied at 3-5mm thickness for a smooth surface suitable for further finishing.
Screeds provide a vital layer in a floor that bonds the finish people see and walk across to the concrete substrate of the building’s construction.
If properly applied and maintained then most screeds need never be seen until the building comes to the end of its life and is dismantled. However failures in the planning, application, curing or drying processes can lead to later, potentially very costly, problems.
Read Flowcrete's whitepaper for an overview of the reasons for screed failure in both commercial and industrial environments, as well as an insight into screed failure avoidance and repair.
Set up and commissioned in 2009, Exeed Premium Dry Mortar manufactures and delivers construction chemicals and mortars of International standards to the GCC market. Our state of the art production facility is located in the Industrial City of Abu Dhabi (ICAD2), covering a total area of 28,000 sq.m.
Foam concrete is a lightweight concrete made by mixing cement paste with synthetic foam. It has a range of densities from 400-1600 kg/m3 depending on its intended use such as gap filling, partitions, or structural works. Advantages include being lightweight, free flowing to fill all voids, impermeable, insulating, durable, and cost effective compared to other materials. It can be used for void filling, thermal insulation, sunken slabs, trench reinstatement, and as a road sub-base. Foam concrete is produced by injecting foam generated using a foam generator and foaming agent into a cement slurry in a transit mixer.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
How to Implement a Real Estate CRM SoftwareSalesTown
To implement a CRM for real estate, set clear goals, choose a CRM with key real estate features, and customize it to your needs. Migrate your data, train your team, and use automation to save time. Monitor performance, ensure data security, and use the CRM to enhance marketing. Regularly check its effectiveness to improve your business.
The Genesis of BriansClub.cm Famous Dark WEb PlatformSabaaSudozai
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...my Pandit
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Understanding User Needs and Satisfying ThemAggregage
https://www.productmanagementtoday.com/frs/26903918/understanding-user-needs-and-satisfying-them
We know we want to create products which our customers find to be valuable. Whether we label it as customer-centric or product-led depends on how long we've been doing product management. There are three challenges we face when doing this. The obvious challenge is figuring out what our users need; the non-obvious challenges are in creating a shared understanding of those needs and in sensing if what we're doing is meeting those needs.
In this webinar, we won't focus on the research methods for discovering user-needs. We will focus on synthesis of the needs we discover, communication and alignment tools, and how we operationalize addressing those needs.
Industry expert Scott Sehlhorst will:
• Introduce a taxonomy for user goals with real world examples
• Present the Onion Diagram, a tool for contextualizing task-level goals
• Illustrate how customer journey maps capture activity-level and task-level goals
• Demonstrate the best approach to selection and prioritization of user-goals to address
• Highlight the crucial benchmarks, observable changes, in ensuring fulfillment of customer needs
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....Lacey Max
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Best practices for project execution and deliveryCLIVE MINCHIN
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...Aleksey Savkin
The Strategy Implementation System offers a structured approach to translating stakeholder needs into actionable strategies using high-level and low-level scorecards. It involves stakeholder analysis, strategy decomposition, adoption of strategic frameworks like Balanced Scorecard or OKR, and alignment of goals, initiatives, and KPIs.
Key Components:
- Stakeholder Analysis
- Strategy Decomposition
- Adoption of Business Frameworks
- Goal Setting
- Initiatives and Action Plans
- KPIs and Performance Metrics
- Learning and Adaptation
- Alignment and Cascading of Scorecards
Benefits:
- Systematic strategy formulation and execution.
- Framework flexibility and automation.
- Enhanced alignment and strategic focus across the organization.
5. ARDEX
‘RAPIDRY FORMULA’ CEMENT SYSTEMS
Products with the ‘Rapidry Formula’ logo
incorporate unique technology:
‘Rapidry Formula’ products have the ability
to totally bind the water used for mixing
This means rapid hardening and drying regardless of thickness for commercial and
industrial flooring systems
This means elimination of the risk of water discoloration, staining and efflorences when
fixing natural stone
6. Surface laitance on concrete
Not normally so very evident
and not removable by brushing
14. Reasons for the Discolouration of Natural Stone
A. Dirt entrained from above, incorrectly sealed or maintained
B. Rising moisture releases minerals contained in the natural stone
C. Contamination carried up from the mortar bed (organic substances, metal)
D. Moisture from the substrate (screed, concrete or adhesive), the grouting compound and plasticiser in
the silicone will discolour edge areas, known as `picture framing`
E. Calcium hydroxide in the mortar bed is deposited on the surface and becomes
calcium carbonate (known as lime bloom or efflorescence)
F. Moisture spots caused by freeze/ thaw activity
17. Ardex
‘Rapidry Formula’ Cement Systems
Products with the ‘Rapidry Formula’ logo
incorporate unique technology:
‘Rapidry Formula’ products have the ability
to totally bind the water used for mixing
This means rapid hardening and drying regardless of thickness for commercial and
industrial flooring systems
This means elimination of the risk of water discoloration, staining and efflorences when
fixing natural stone
19. Screed cement
A37
Rapid hardening and drying cement for floor screeds
• Rapid hardening –
walk able in 3-4 hours
• Rapid drying – receives floor coverings after 1-7 days regardless of
thickness
• Apply as bonded, unbonded or floating screed
• Rapid strength development,
10/30/35 N/mm2 after 1/7/28 days
• Can be pumped for fast application
20. Screed cement
A38
Rapid hardening and drying cement for floor screeds
Rapid hardening – walk able in 3 hours
Rapid drying – receives floor coverings after 48 hours
regardless of thickness
• Tiling after only 4 hours
Passes Test with BRE screed tester
Apply as bonded, unbonded or floating screed
Rapid strength development,
25/40/45 N/mm2 after 1/6/28 days
Can be pumped for fast application
Rapidry Formula
34. P 82
Priming and bonding agent
For internal use only
Two-part water-based synthetic dispersion primer and
bonding agent
Seals substrates and acts as an adhesive bridge
Nonflammable
Suitable for dense or smooth surfaces for receiving
ceramic tiles or smoothing compounds
Use to prime rigid metal flooring grade asphalt, suitable
paint coatings, glazed tiles, power floated concrete,
adhesive residues etc.
35. P51
Primer and Bonding Agent
• Improves Adhesion
• Inhibit Penetration of water
• Used as pore sealer on floor surfaces to prevent air bubbles rising
through the sub floor smoothing compound
• Mixed with water to prepare internal surfaces to receive Cement – based
levelling compounds, adhesive,screeds as well as plaster material
• To prolong flow life and workability
43. CL 11
Commercial Levelling Compound
• Cement based
• Can be applied from 2mm to10mm
• Walk able after 3hrs and ready to receive floor covering within 48 hrs
• Durable – Excellent surface Hardness
• Produces Flat and absorbent surfaces for the subsequent laying of all
kind of flooring products
• Used in internal sub floor such as concrete, cement/sand screed, quarry
tiles etc.
• Generally P51 primer is mandatory especially on absorbent sub – floor
• Coverage approx. 1.5kg/m2/mm i.e 25kg bag /5.55m2/3mm thick
• Compressive strength : 5/20/26 N/mm2 at 1/7/28 days respectively
44. K15
Self levelling Sub- floor Smoothing Compound
• Rapid hardening – workable in approx. 2 hours
• Rapid Drying – receives floor coverings within 24 hrs regardless of thickness
• Rapidry Formula – It is the ability of the mortar to totally bind the water used for
mixing
• Prime with P82 non porous or P51 primers for porous
• Used in internal sub floor such as concrete, cement/sand screed, quarry tiles etc.
• Applications include smoothing tampered , uneven, damaged or rained in-situ
concrete sub floors
• Can be applied from 3mm to10mm
• Coverage approx. 1.5kg/m2/mm i.e. 22kg bag /5m2/3mm thick
45. K 80
Rapid Drying Industrial Topping/Wearing Surface
• Rapid hardening
• Rapid Drying – receives floor coverings within 24 hrs regardless of thickness
• Fast track – Install in the evening and reopen for business next day
• Can be applied by trowel or pump
• Strong – with stands heavy wheeled traffic and has excellent abrasion
resistance(Industrial)
• Can receive a range of surface finishes including epoxy paints, resin coating
• Rapidry Formula – It is the ability of the mortar to totally bind the water used for
mixing
• Prime with R3E with sand blinding or P51 in 1:2 ratio
• Used in internal sub floor such as concrete up to 5mm to 50mm.
• Coverage approx. 1.65kg/m2/mm i.e. 25kg bag /3m2/5mm thick
• Compressive strength : 14/20/32 N/mm2 at 1/7/28 days respectively
46. K301
Exterior Self-smoothing levelling and Resurfacing compound
• Suitable for internal and external applications
• For smoothing and resurfacing paths, drives, parking areas, courtyards,
etc.
• Fast setting – Walk able after 2 hrs
• Rapid hardening can with stand light vehicular traffic after 48 hrs
• For thickness 2mm up to 20mm
• Can be used with suitable resin coatings
• Prime with R3E with sand blinding or P51 in 1:2 ratio
• Used in both internal and external sub floor such as concrete
• Coverage approx. 1.6kg/m2/mm i.e. 25kg bag /7.8m2/2mm thick
• Compressive strength : 20/28 N/mm2 at 7/28 days respectively
47. SLC USAGE COMPRESSION TENSILE BENDING/ BALL PRESSURE WALKABILITY/USABILI
STRENGTH FLEXURAL HARDNESS TY
After 28 days
CL11 Internal - For levels and smooth 26 N/mm2 6 N/mm2 65 N/mm2 3 hours at 3mm
uneven internal sub floor prior to thickness
floor covers – 2-10mm thick
K 15 Internal sub-floors of concrete, 28.8 N/mm2 7 N/mm2 73N/mm2 2 hours for walking and
cement/sand, quarry tiles, etc., prior 24 hours for floor
to the installation of floor coverings. covers
K 80 Internal - Compound for resurfacing 32 N/mm2 9 N/mm2 90 N/mm2 2 hours for walking and
and leveling existing concrete floors 24 hours for floor
to give a hard, smooth, flat, wearing coatings
surface or as a base for suitable paint
and resin coatings. 5-50mm thick
K 301 External - For smooth and level the 28 N/mm2 6.5 N/mm2 65 N/mm2 2 hours for walking and
concrete surfaces such as balconies, 2, 5 , 7 days for over
domestic driveways, garages, coat of 5, 10 & 20mm
walkways etc exposed to normal foot thick respectively
and rubber wheeled traffic. 2-20mm
thick
58. Ardex Industrial Flooring System
AIRCRAFT HANGERS BAKERY GARAGES /WORKSHOPS
DRINKS PRODUCTION
PUBLIC AREAS
MEAT PROCCESSING
59. R3E
Priming and bonding agent
For internal and external use
Two-part epoxy based primer and bonding agent
Solvent free, can be sand-blinded
Seals substrates and acts as an adhesive bridge
Suitable for dense or smooth surfaces for
receiving epoxy coatings, PU’s and/or smoothing
compounds
Use to prime rigid metal flooring grade asphalt,
suitable paint coatings, glazed tiles, power floated
concrete, adhesive residues etc.
Easy mixing 1:1 of the two parts in pre-measured
packs
60. R4P
Priming and bonding agent
For internal and external use
Three-part PU based primer and bonding agent
Solvent free, can be sand-blinded
Seals substrates and acts as an adhesive bridge
Suitable for dense or smooth surfaces for
receiving epoxy coatings, PU’s and/or smoothing
compounds
Use to prime rigid metal flooring grade asphalt,
suitable paint coatings, glazed tiles, power floated
concrete, adhesive residues etc.
Easy mixing 1:1:1 of the three parts in pre-
measured packs