Fairscreed Floorpatch is a high-strength, fast-curing methacrylate patching mortar suitable for repairing damaged concrete and masonry surfaces. It offers excellent adhesion, chemical resistance, and mechanical properties, with a quick curing time of 2 hours at 30°C. Supplied in 10 kg packs, it covers 0.5 m² at 10 mm thickness.

1. FAIRSCREED FLOORPATCH
A HIGH STRENGTH METHACRYLATE
PATCHING MORTAR

2. Benefits
 High strength.
 Very good chemical resistance.
 Excellent adhesion.
 Fast curing, even at low temperatures.
 Impact and abrasion resistant.
 Frost resistant and impervious to water.
 Excellent mechanical properties.
 Permanent repair to spalled & damaged concretes.

3. Uses
FAIRSCREED FLOORPATCH is used for repairing spalled or damaged
concrete, pre-cast concrete beams, chemical bunds, floor repairs.

4. Description
FAIRSCREED FLOORPATCH is a fast curing, high strength, trowel
applied, four component Methacrylate resin mortar, designed for rapid and
permanent repairs to concrete and masonry surfaces.

5. Properties
Colour : Light Grey (other available on requirest)
Density : 2,010 Kg/m²
Pot Life : 20 minutes at 30ºC
Hard Dry : 1 hour at 30ºC
Full Cure : 2 hours at 30 ºC
Compressive Strength : 40 N/cm²
Taber Abrasion Resistance : 45 Mg weight loss (CS wheels ; 1 kg loads ; 1,000
cycles)
Adhesion To Concrete : 3.7 N/mm² (Concrete failure)
Temperature Range
During Application : -20ºC to + 40ºC
In Service : -40ºC to + 60ºC

6. Packing & Coverage
FAIRCREED FLOORPATCH is supplied in 10 Kg pack. A 10 Kg pack
yields 5 litres of mortar, sufficient for 0.5 m² @ 10mm thick.

7. Packing & Coverage
FAIRCREED FLOORPATCH is supplied in 10 Kg pack. A 10 Kg pack
yields 5 litres of mortar, sufficient for 0.5 m² @ 10mm thick.