Concept of water level and rain monitering
•Download as PPTX, PDF•
0 likes•183 views
The document discusses water level indicators and rain monitoring. It describes how water level indicators work using probes to detect water levels in tanks. As the water level rises, it triggers different probes and LED displays to indicate the water level. These devices help prevent overfilling and ensure pumps operate only when needed. The document also briefly explains how rain gauges with funnels and cylinders are used to measure rainfall amounts by collecting water and marking levels in the cylinder.
Report
Share
Report
Share
Recommended
Rain guage
The document discusses rainfall measurement techniques used at Vigyan Ashram Pabal. It describes both recording and non-recording rain gauges that are used to collect rainfall data over time. Recording rain gauges automatically record rainfall measurements along with other data like wind and temperature. Non-recording rain gauges simply collect rainfall in a calibrated funnel and bottle that must be manually measured. Rainfall measurements are taken daily and involve determining the volume of water collected and calculating the rainfall in mm based on the collector surface area. This data is used to analyze rainfall statistics and averages for the area.
Topic1 >Illustration of various types of rain-gauges.,,2> Advantaged and dis...
in this presentation you will know about following head line point.
1>Illustration of various types of rain-gauges.
2>Advantaged and disadvantages of various types of gauges.
Rain gauge 2
A rain gauge is an instrument used by meteorologists and hydrologists to measure the amount of liquid precipitation over a set period of time, usually 24 hours. There are several types of rain gauges, including standard, tipping bucket, optical, and acoustic rain gauges. A standard rain gauge consists of a funnel emptying into a graduated cylinder to measure water height, while a tipping bucket gauge uses a see-saw container that electronically records each tip. Rain gauges are important for monitoring moisture levels and aiding activities like farming.
Phy 11-6961
This document outlines different methods for liquid level sensing and measurement. It discusses point measurement systems that detect liquid levels at a single point, as well as continuous measurement systems that monitor liquid levels over a range. Point measurement systems include float sensors and conductivity probes, while continuous measurement uses ultrasonic sensors, radar sensors, and optical sensors. The document also discusses classifying level technologies as manual, electromechanical, electronic contacting, or electronic non-contacting. It provides examples of how radar and capacitance sensors can be used for level detection and concludes that electrical methods provide more accurate measurements than mechanical methods.
Rain gauge pd.5
King Sejong and Prince Munjong of Korea invented the rain gauge in 1441 to help improve agricultural technology and provide accurate rainfall measurements. They developed one of the first standardized rain gauges, which was a container used to measure rainfall, over 200 years before similar devices were invented in Europe. Modern rain gauges come in different designs like tipping buckets and mounted cylinders and are used to record rainfall amounts and help predict conditions for farmers.
Measurement of precipitation (rainfall )
Measurement of rainfall is done using rain gauges, which collect precipitation and allow the amount to be measured. Non-recording rain gauges, like the commonly used Symons gauge in India, collect rainfall in a vessel that is read daily to determine the amount of precipitation. Recording rain gauges produce a continuous plot of rainfall over time through mechanisms like tipping buckets, weighing the collected water, or tracking a float level. Proper placement and regular maintenance of rain gauges is important for accurate measurement of precipitation.
Methods of measuring rainfall
This document discusses methods for measuring rainfall and runoff. It describes various types of rain gauges used to measure rainfall manually and remotely, including standard, weighing, optical, and tipping bucket rain gauges. Factors around the number and distribution of rain gauges are also covered. The document then shifts to discussing methods for measuring runoff, including using mathematical models, the runoff curve number method, and equipment for simulating and measuring surface runoff and erosion from natural and extreme precipitation events in catchment areas.
Measurement of precipitation
There are three main types of recording rain gauges:
1) Tipping bucket gauges contain two buckets that tip when 0.25mm of rain is collected, actuating an electric circuit to mark rainfall on a revolving chart.
2) Weighing gauges use a spring-lever balance to move a pen across a chart as rainfall accumulates in a collecting tank.
3) Float gauges move a pen as rain fills a float chamber, with an overflow siphon chamber automatically draining excess water. The clockwork chart records rainfall over 24 hours.
Recommended
Rain guage
The document discusses rainfall measurement techniques used at Vigyan Ashram Pabal. It describes both recording and non-recording rain gauges that are used to collect rainfall data over time. Recording rain gauges automatically record rainfall measurements along with other data like wind and temperature. Non-recording rain gauges simply collect rainfall in a calibrated funnel and bottle that must be manually measured. Rainfall measurements are taken daily and involve determining the volume of water collected and calculating the rainfall in mm based on the collector surface area. This data is used to analyze rainfall statistics and averages for the area.
Topic1 >Illustration of various types of rain-gauges.,,2> Advantaged and dis...
in this presentation you will know about following head line point.
1>Illustration of various types of rain-gauges.
2>Advantaged and disadvantages of various types of gauges.
Rain gauge 2
A rain gauge is an instrument used by meteorologists and hydrologists to measure the amount of liquid precipitation over a set period of time, usually 24 hours. There are several types of rain gauges, including standard, tipping bucket, optical, and acoustic rain gauges. A standard rain gauge consists of a funnel emptying into a graduated cylinder to measure water height, while a tipping bucket gauge uses a see-saw container that electronically records each tip. Rain gauges are important for monitoring moisture levels and aiding activities like farming.
Phy 11-6961
This document outlines different methods for liquid level sensing and measurement. It discusses point measurement systems that detect liquid levels at a single point, as well as continuous measurement systems that monitor liquid levels over a range. Point measurement systems include float sensors and conductivity probes, while continuous measurement uses ultrasonic sensors, radar sensors, and optical sensors. The document also discusses classifying level technologies as manual, electromechanical, electronic contacting, or electronic non-contacting. It provides examples of how radar and capacitance sensors can be used for level detection and concludes that electrical methods provide more accurate measurements than mechanical methods.
Rain gauge pd.5
King Sejong and Prince Munjong of Korea invented the rain gauge in 1441 to help improve agricultural technology and provide accurate rainfall measurements. They developed one of the first standardized rain gauges, which was a container used to measure rainfall, over 200 years before similar devices were invented in Europe. Modern rain gauges come in different designs like tipping buckets and mounted cylinders and are used to record rainfall amounts and help predict conditions for farmers.
Measurement of precipitation (rainfall )
Measurement of rainfall is done using rain gauges, which collect precipitation and allow the amount to be measured. Non-recording rain gauges, like the commonly used Symons gauge in India, collect rainfall in a vessel that is read daily to determine the amount of precipitation. Recording rain gauges produce a continuous plot of rainfall over time through mechanisms like tipping buckets, weighing the collected water, or tracking a float level. Proper placement and regular maintenance of rain gauges is important for accurate measurement of precipitation.
Methods of measuring rainfall
This document discusses methods for measuring rainfall and runoff. It describes various types of rain gauges used to measure rainfall manually and remotely, including standard, weighing, optical, and tipping bucket rain gauges. Factors around the number and distribution of rain gauges are also covered. The document then shifts to discussing methods for measuring runoff, including using mathematical models, the runoff curve number method, and equipment for simulating and measuring surface runoff and erosion from natural and extreme precipitation events in catchment areas.
Measurement of precipitation
There are three main types of recording rain gauges:
1) Tipping bucket gauges contain two buckets that tip when 0.25mm of rain is collected, actuating an electric circuit to mark rainfall on a revolving chart.
2) Weighing gauges use a spring-lever balance to move a pen across a chart as rainfall accumulates in a collecting tank.
3) Float gauges move a pen as rain fills a float chamber, with an overflow siphon chamber automatically draining excess water. The clockwork chart records rainfall over 24 hours.
Sec 1 Express Rain Gauge
Clouds form when moist air rises and condenses. Clouds are classified by height, shape, and whether they bring precipitation. Rainfall is measured using a rain gauge placed in an open area, partially buried in the ground and 30cm above the ground to prevent inaccurate readings. Rainfall amounts are usually measured in millimeters.
Design And Implementation Of Toilet Monitoring Systemfinal.Pptx
The document describes the design and implementation of a toilet monitoring system that monitors water levels, limits the number of users, and tracks the number of users per day. The system uses sensors to monitor water levels and detect users entering and exiting. It has logical operations and block diagrams to control water levels and lights based on sensor readings. The system displays the number of current users and status indicators using 7-segment displays. It was implemented with challenges around part availability and compiler limitations.
Hydrology ( Measurement of rainfall )
This document discusses types of rain gauges used to measure rainfall. It describes non-automatic/non-recording rain gauges like Symon's rain gauge which collect rainfall manually. It also describes automatic/recording rain gauges like weighing bucket, tipping bucket, and float type gauges that record rainfall continuously without manual measurement. Recording gauges provide rainfall intensity over time through a pen on a rotating drum, while non-recording gauges only give total rainfall. Recording gauges do not require an attendant but are more expensive and prone to mechanical faults.
Rainfall measurement methods
This document discusses different methods for measuring and averaging rainfall over an area:
- Rainfall is measured using rain gauges and expressed as depth over an area.
- The arithmetic mean, Thiessen polygon, and isohyet methods are used to calculate average rainfall values from point measurements at rain gauge stations.
- The Thiessen polygon method assigns influence areas to each station based on the location of stations, and weights each measurement by its influence area.
- The isohyet method involves drawing lines of equal rainfall and calculating a weighted average based on the rainfall amounts and sizes of the areas between the lines.
Baseline Control Point & PipeView Water Management
Baseline is redefining irrigation water management by providing the irrigation industry’s ONLY real-time Flow Monitoring AND Pressure Monitoring using ControlPoint technology.
Presentation for unit 2 precipitation and its measurement
Precipitation
Comparison between methods for calculating average rainfall
What is Rain gauge
History of Rain Gauge
Principles of rain gauge
Uses of rain gauge
Types of rain gauge
Other type of rain gauge
Recording of Rain from gauge
Calculation of Rainfall
Adequacy of rain gauge stations
frequency of the rainfall
References
Frequency of calibration
The document outlines calibration frequencies for parts in a high-volume sampler and stack monitoring kit. For the high-volume sampler, the blower, rotameter, and time totalizer should be calibrated once every six months or when replaced. For the stack monitoring kit, the pitot tube, rotameters, pyrometer, stop watch, pressure gauge, thermometer should be calibrated after every 10-15 uses to ensure accurate flow and concentration measurements. If the parts are not properly calibrated, the measured flow and concentration results will not be correct.
Hydrology measuring rain
This document provides an overview of a hydrometry course covering measurement of various components of the hydrological cycle including precipitation, evaporation, soil moisture, and streamflow. It discusses different types of instruments used to measure these variables such as raingauges, evaporation pans, neutron probes, tensiometers, and current meters. Measurement methods include manual observation as well as automated data recording using devices like data loggers. The goal is to introduce concepts and terminology for quantifying water in the hydrological cycle.
Sensors for Centrifugal Pump
IIoT Technology is making pumps smarter. Smart pumps are intelligent devices which are connected to each other through IoT Technology. read more here : https://www.qwentic.com/blog/sensors-for-centrifugal-pump
Sensors for industrial centrifugal pumps
IIoT Sensors for Centrifugal Pump help to pick data on operational parameters such as heat, presence of gas, vapor and more to ensure damage can be prevented.
Presentation1
This document provides an overview of the analyzer component for a washer, including its working, adjustments, calibrations, and troubleshooting. It discusses the washer component, comparing it to previous models and outlining its needle wash circuit. The document also covers the bubble sensor, reader component using CLIA technique, and adjustments for the washer aspiration position, bubble sensors, spindle position, and chamber close position. Errors like target not reached and washer aspiration detection failure are addressed.
Flocal & flow lab oct 2017 - final
Nagman provides flow calibration solutions including the FLOCAL flow meter calibration system and a mobile flow calibration skid. The FLOCAL allows for calibration of various flow meters from DN 15 to DN 300 using a gravimetric/volumetric method. It features pumps to generate flow from 1 to 600 m3/hr, test lines to mount multiple units under test, weighing tanks connected to load cells, and automated control software to generate calibration reports. Nagman's flow calibration laboratory is accredited according to ISO/IEC 17025 standards and offers calibration services for various parameters including flow.
Manometer by ACMAS Technologies Pvt Ltd.
Weiber Manometer is ideal equipment for use in research and general applications in the field of measurement of pressure of air or liquid.
High performance(pressure
This document discusses high performance liquid chromatography (HPLC) for analyzing oils and fats. It explains that HPLC involves separating components based on how they are distributed between a liquid mobile phase and solid stationary phase. There are two main types of mobile phases used: isocratic elution with a fixed composition and flow rate, and gradient elution where the composition and flow rate change over time to improve separation. Reverse phase HPLC is most commonly used for oil and fat analysis, where nonpolar stationary phases are used and hydrophilic compounds elute more quickly than hydrophobic compounds.
Frac formulas david aakre technologist
This document provides formulas and equations for calculating rates, pressures, volumes, densities, and other parameters related to hydraulic fracturing operations. Some key points:
1. Formulas are provided for calculating maximum frac rate, line volume, fluid gradient, bottomhole pressure, frac gradient, horsepower requirements, and other fracturing parameters.
2. Equations are outlined for calculating parameters related to blender operations like clean water weight, sand volumes, slurry volumes, densities, and screw speeds.
3. Pump math formulas define relationships for determining pump capacities based on fluid end geometry, transmission ratios, engine speeds, and other factors.
fluid mechanics exp. Flow rate
Muhammed Fuad Rashid
Petroleum Engineering Department at Koya Universiy
Fluid Mechanics Laboratory
2020
Automatic water sampler.pptx
An automatic water sampler is an intelligent pump that collects water samples from a source into bottles based on time, flow, or other parameters like rainfall or water quality. It allows for more efficient, precise, and accurate monitoring of water quality over time at remote sites. Modern automatic water samplers integrate sensors to trigger sampling based on water quality measurements and transmit data remotely. Their main applications include monitoring rivers and wastewater for regulatory compliance.
ADITEC04
This document describes an automatic water level controller system using a microcontroller. The system controls the on/off state of a water pump based on the water level in an overhead tank. When the water level drops below 10%, the pump turns on, and when it exceeds 90%, the pump turns off. The water level is also displayed using LEDs. The system prevents dry running of the pump by only turning it on when sufficient water is available.
Water submetering
Water sub metering allows property owners and managers to measure water consumption within individual units or fixtures on a property. A sub-meter is installed downstream of the primary meter to measure water usage for specific areas. Sub-metering provides data on individual unit consumption, enabling landlords to charge tenants based on actual usage and identify water conservation opportunities. It can help reduce overall water usage when tenants are accountable for their own consumption.
The miracle of automatic water level controler
Automatic water position regulators are a product that was created to automatically control a motor, which helps to ensure a constant reserve of water in a storehouse tank.
These automatic water position regulators are used to automatically fill the over-head tank when it starts or has come empty as well as cover the water position in it.
Water level indicator
This document describes a water level indicator experiment that uses three probes placed at different levels in a water tank. When the water reaches each level, the connection between probes is completed, allowing the microcontroller to detect the water level and display it on a three-segment display. The system can indicate up to nine water levels and also automatically turns on a light when the tank is full. The goal is to prevent water shortage and overflow by monitoring the tank level and controlling the water pump accordingly. It provides a low-cost solution to remotely monitor household and industrial water tanks.
Equipment calibration PPT by Shravan Kumar
This presentation is for Pharmaceuticals Equipments which are used in the manufacturing of APIs. Calibration procedure for Equipments
More Related Content
What's hot
Sec 1 Express Rain Gauge
Clouds form when moist air rises and condenses. Clouds are classified by height, shape, and whether they bring precipitation. Rainfall is measured using a rain gauge placed in an open area, partially buried in the ground and 30cm above the ground to prevent inaccurate readings. Rainfall amounts are usually measured in millimeters.
Design And Implementation Of Toilet Monitoring Systemfinal.Pptx
The document describes the design and implementation of a toilet monitoring system that monitors water levels, limits the number of users, and tracks the number of users per day. The system uses sensors to monitor water levels and detect users entering and exiting. It has logical operations and block diagrams to control water levels and lights based on sensor readings. The system displays the number of current users and status indicators using 7-segment displays. It was implemented with challenges around part availability and compiler limitations.
Hydrology ( Measurement of rainfall )
This document discusses types of rain gauges used to measure rainfall. It describes non-automatic/non-recording rain gauges like Symon's rain gauge which collect rainfall manually. It also describes automatic/recording rain gauges like weighing bucket, tipping bucket, and float type gauges that record rainfall continuously without manual measurement. Recording gauges provide rainfall intensity over time through a pen on a rotating drum, while non-recording gauges only give total rainfall. Recording gauges do not require an attendant but are more expensive and prone to mechanical faults.
Rainfall measurement methods
This document discusses different methods for measuring and averaging rainfall over an area:
- Rainfall is measured using rain gauges and expressed as depth over an area.
- The arithmetic mean, Thiessen polygon, and isohyet methods are used to calculate average rainfall values from point measurements at rain gauge stations.
- The Thiessen polygon method assigns influence areas to each station based on the location of stations, and weights each measurement by its influence area.
- The isohyet method involves drawing lines of equal rainfall and calculating a weighted average based on the rainfall amounts and sizes of the areas between the lines.
Baseline Control Point & PipeView Water Management
Baseline is redefining irrigation water management by providing the irrigation industry’s ONLY real-time Flow Monitoring AND Pressure Monitoring using ControlPoint technology.
Presentation for unit 2 precipitation and its measurement
Precipitation
Comparison between methods for calculating average rainfall
What is Rain gauge
History of Rain Gauge
Principles of rain gauge
Uses of rain gauge
Types of rain gauge
Other type of rain gauge
Recording of Rain from gauge
Calculation of Rainfall
Adequacy of rain gauge stations
frequency of the rainfall
References
Frequency of calibration
The document outlines calibration frequencies for parts in a high-volume sampler and stack monitoring kit. For the high-volume sampler, the blower, rotameter, and time totalizer should be calibrated once every six months or when replaced. For the stack monitoring kit, the pitot tube, rotameters, pyrometer, stop watch, pressure gauge, thermometer should be calibrated after every 10-15 uses to ensure accurate flow and concentration measurements. If the parts are not properly calibrated, the measured flow and concentration results will not be correct.
Hydrology measuring rain
This document provides an overview of a hydrometry course covering measurement of various components of the hydrological cycle including precipitation, evaporation, soil moisture, and streamflow. It discusses different types of instruments used to measure these variables such as raingauges, evaporation pans, neutron probes, tensiometers, and current meters. Measurement methods include manual observation as well as automated data recording using devices like data loggers. The goal is to introduce concepts and terminology for quantifying water in the hydrological cycle.
Sensors for Centrifugal Pump
IIoT Technology is making pumps smarter. Smart pumps are intelligent devices which are connected to each other through IoT Technology. read more here : https://www.qwentic.com/blog/sensors-for-centrifugal-pump
Sensors for industrial centrifugal pumps
IIoT Sensors for Centrifugal Pump help to pick data on operational parameters such as heat, presence of gas, vapor and more to ensure damage can be prevented.
Presentation1
This document provides an overview of the analyzer component for a washer, including its working, adjustments, calibrations, and troubleshooting. It discusses the washer component, comparing it to previous models and outlining its needle wash circuit. The document also covers the bubble sensor, reader component using CLIA technique, and adjustments for the washer aspiration position, bubble sensors, spindle position, and chamber close position. Errors like target not reached and washer aspiration detection failure are addressed.
Flocal & flow lab oct 2017 - final
Nagman provides flow calibration solutions including the FLOCAL flow meter calibration system and a mobile flow calibration skid. The FLOCAL allows for calibration of various flow meters from DN 15 to DN 300 using a gravimetric/volumetric method. It features pumps to generate flow from 1 to 600 m3/hr, test lines to mount multiple units under test, weighing tanks connected to load cells, and automated control software to generate calibration reports. Nagman's flow calibration laboratory is accredited according to ISO/IEC 17025 standards and offers calibration services for various parameters including flow.
Manometer by ACMAS Technologies Pvt Ltd.
Weiber Manometer is ideal equipment for use in research and general applications in the field of measurement of pressure of air or liquid.
High performance(pressure
This document discusses high performance liquid chromatography (HPLC) for analyzing oils and fats. It explains that HPLC involves separating components based on how they are distributed between a liquid mobile phase and solid stationary phase. There are two main types of mobile phases used: isocratic elution with a fixed composition and flow rate, and gradient elution where the composition and flow rate change over time to improve separation. Reverse phase HPLC is most commonly used for oil and fat analysis, where nonpolar stationary phases are used and hydrophilic compounds elute more quickly than hydrophobic compounds.
Frac formulas david aakre technologist
This document provides formulas and equations for calculating rates, pressures, volumes, densities, and other parameters related to hydraulic fracturing operations. Some key points:
1. Formulas are provided for calculating maximum frac rate, line volume, fluid gradient, bottomhole pressure, frac gradient, horsepower requirements, and other fracturing parameters.
2. Equations are outlined for calculating parameters related to blender operations like clean water weight, sand volumes, slurry volumes, densities, and screw speeds.
3. Pump math formulas define relationships for determining pump capacities based on fluid end geometry, transmission ratios, engine speeds, and other factors.
What's hot (15)
Design And Implementation Of Toilet Monitoring Systemfinal.Pptx
Design And Implementation Of Toilet Monitoring Systemfinal.Pptx
Baseline Control Point & PipeView Water Management
Baseline Control Point & PipeView Water Management
Presentation for unit 2 precipitation and its measurement
Presentation for unit 2 precipitation and its measurement
Similar to Concept of water level and rain monitering
fluid mechanics exp. Flow rate
Muhammed Fuad Rashid
Petroleum Engineering Department at Koya Universiy
Fluid Mechanics Laboratory
2020
Automatic water sampler.pptx
An automatic water sampler is an intelligent pump that collects water samples from a source into bottles based on time, flow, or other parameters like rainfall or water quality. It allows for more efficient, precise, and accurate monitoring of water quality over time at remote sites. Modern automatic water samplers integrate sensors to trigger sampling based on water quality measurements and transmit data remotely. Their main applications include monitoring rivers and wastewater for regulatory compliance.
ADITEC04
This document describes an automatic water level controller system using a microcontroller. The system controls the on/off state of a water pump based on the water level in an overhead tank. When the water level drops below 10%, the pump turns on, and when it exceeds 90%, the pump turns off. The water level is also displayed using LEDs. The system prevents dry running of the pump by only turning it on when sufficient water is available.
Water submetering
Water sub metering allows property owners and managers to measure water consumption within individual units or fixtures on a property. A sub-meter is installed downstream of the primary meter to measure water usage for specific areas. Sub-metering provides data on individual unit consumption, enabling landlords to charge tenants based on actual usage and identify water conservation opportunities. It can help reduce overall water usage when tenants are accountable for their own consumption.
The miracle of automatic water level controler
Automatic water position regulators are a product that was created to automatically control a motor, which helps to ensure a constant reserve of water in a storehouse tank.
These automatic water position regulators are used to automatically fill the over-head tank when it starts or has come empty as well as cover the water position in it.
Water level indicator
This document describes a water level indicator experiment that uses three probes placed at different levels in a water tank. When the water reaches each level, the connection between probes is completed, allowing the microcontroller to detect the water level and display it on a three-segment display. The system can indicate up to nine water levels and also automatically turns on a light when the tank is full. The goal is to prevent water shortage and overflow by monitoring the tank level and controlling the water pump accordingly. It provides a low-cost solution to remotely monitor household and industrial water tanks.
Equipment calibration PPT by Shravan Kumar
This presentation is for Pharmaceuticals Equipments which are used in the manufacturing of APIs. Calibration procedure for Equipments
Two methods
This document summarizes a water level indicator circuit that uses LEDs and a buzzer to indicate the water level in a tank. The circuit works by completing a connection through the water as each probe is submerged, causing the corresponding LED to light up. When the last probe connects, the buzzer will sound to indicate the tank is full. The document also describes a float-based system that directly measures the water level using a float and counterweight attached to a linear scale outside the tank.
Premprem
The document describes an automatic drip irrigation system that uses sensors and a microcontroller. It monitors soil moisture and controls water flow accordingly. Sensors measure soil moisture and a flow meter tracks water usage. The microcontroller automates irrigation based on the sensor data. This allows irrigation to be precisely controlled to maintain optimal soil moisture without overwatering, saving water and improving crop yields compared to manual drip irrigation.
Float sensor
Float level sensors are continuous level sensors attributing a magnetic float that move up and down as liquid levels change. The movement of the float creates a magnetic field that actuates a hermetically sealed reed switch in the stem of the level sensor, triggering the switch to open or close.
Automatic Water Dispenser using IOT
This document outlines the design of an automated water dispenser using IoT. It consists of 8 steps:
1. Define the purpose, behavior, and requirements of detecting water bottles to automatically turn on the tap.
2. Use use case diagrams to formally describe the detection and dispensing processes.
3. Specify the physical and virtual entities, including sensors, valves, and their representation in software.
4. Define the information model showing how detection of an object triggers the valve and water flow.
5. Specify the threshold and state services to control the solenoid valve and LED based on sensor input.
6. Determine the system uses IoT level 1 as it performs all sensing, analysis and hosting
LEVEL Measurement
This document discusses level measurement techniques, including point level and continuous level measurement. Point level measurement uses sensors to detect if the level is within limits, while continuous measurement tracks the level over a range of values. Methods discussed include sight glasses, floats, and pressure-based techniques. Hydrostatic pressure level sensors measure the pressure at the bottom of a tank to determine level. Differential pressure transmitters convert the pressure difference into a standard output signal proportional to level. Closed tanks require differential pressure to subtract the vapor pressure and measure level based on hydrostatic pressure alone.
Water level indicator(mini project ppt)
This document describes a water level indicator circuit that can be installed in overhead water tanks. It consists of sensors placed inside the tank that detect the water level and send signals to a circuit board. When the tank is full, the circuit activates a buzzer to alert the user and automatically shuts off the water pump to prevent overflow. The device allows users to monitor the water level without having to check the tank and ensures water is not wasted by overfilling.
Level measurement
Direct level measurement methods like dipsticks and sight glasses measure the liquid level directly. Indirect methods infer the level from other measurements like pressure, conductivity, or time-of-flight. Common direct methods include dipsticks, sight glasses, and float gauges. Indirect methods include measuring hydrostatic pressure, conductivity, capacitance, time-of-flight of signals, and radiation absorption. Float gauges and pneumatic level sensors transmit the liquid level measurement remotely via mechanical linkages or gas pressure. Sight glasses and float gauges are simple and economical but have limitations like limited range.
flow rate
Muhammed Fuad Rashid
Petroleum Engineering Department at Koya Universiy
Fluid Mechanics Laboratory
2020
Physics Investigatory Project(Water Level Indicating System)
The document describes a water level indicator circuit project. It includes an acknowledgment thanking those who supported the project. It then provides details on the need for a water level indicator to prevent overflow and waste. The circuit uses 4 probes at different levels, 4 transistors, LEDs, a buzzer and battery. It works by detecting 4 different water levels - empty, intermediate, full, and overflow. The circuit and working are illustrated. Applications include storage tanks, reservoirs, and automating pumps. Benefits are monitoring remotely, conserving water and power, and preventing overflow damage. Images show the circuit diagram and unit at different water levels.
110958678 ee-188-project
This document discusses the design and testing of a wireless water level indicator and controller system. The system uses a PIC microcontroller connected to water level sensors to measure the water level in a storage tank. It then transmits this data wirelessly to a receiver connected to an LCD display, LED indicators, buzzer, and motor control. The device was tested at various transmission distances both with and without antennas. It successfully measured and displayed water levels and controlled the motor from a distance, meeting the objectives of creating an automatic wireless water monitoring system.
Automatic plant irrigation system
This document describes an automatic plant irrigation system that uses sensors to monitor soil moisture content and water levels. The system aims to reduce manual labor for farmers by automatically watering plants. It uses a soil moisture sensor and water level indicator circuit to sense moisture levels. When the soil is dry, the sensor outputs a signal that triggers a relay and pump to turn on via an NE555 integrated circuit, supplying water. The system aims to optimize water usage and reduce reliance on rainfall for agriculture.
1.2
This document provides an agenda and overview for an energy audit practitioner course on monitoring equipment. It discusses several types of equipment used to measure electrical parameters, combustion gases, pressure, temperature, flow rates, speed, leaks, and light intensity. Electrical measuring instruments can monitor voltage, current, power, and harmonics. Combustion analyzers measure flue gas composition. Manometers are used to measure pressure differentials. Thermometers, water flow meters, tachometers, stroboscopes, leak detectors, and lux meters are also covered, along with how each tool is used and important safety precautions.
Water level indicator
It is a simple innovative idea which demonstrates how to design a simple circuit which can act as a WATER LEVEL INDICATOR. It is a general idea and can be even modified to build an AUTOMATIC ON/OFF CIRCUIT as the water starts overflowing by implementing a simple JK-flip-flop in the circuit.
Similar to Concept of water level and rain monitering (20)
Physics Investigatory Project(Water Level Indicating System)
Physics Investigatory Project(Water Level Indicating System)
Recently uploaded
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Dynamic Programming
Backtracking
Techniques for Graphs
Branch and Bound
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Robot manipulators have become important equipment in production lines, medical fields, and transportation. Improving the quality of trajectory tracking for
robot hands is always an attractive topic in the research community. This is a
challenging problem because robot manipulators are complex nonlinear systems
and are often subject to fluctuations in loads and external disturbances. This
article proposes an adaptive synchronous sliding control scheme to improve trajectory tracking performance for a robot manipulator. The proposed controller
ensures that the positions of the joints track the desired trajectory, synchronize
the errors, and significantly reduces chattering. First, the synchronous tracking
errors and synchronous sliding surfaces are presented. Second, the synchronous
tracking error dynamics are determined. Third, a robust adaptive control law is
designed,the unknown components of the model are estimated online by the neural network, and the parameters of the switching elements are selected by fuzzy
logic. The built algorithm ensures that the tracking and approximation errors
are ultimately uniformly bounded (UUB). Finally, the effectiveness of the constructed algorithm is demonstrated through simulation and experimental results.
Simulation and experimental results show that the proposed controller is effective with small synchronous tracking errors, and the chattering phenomenon is
significantly reduced.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Ppt on evs amity University project work.........................??????!?!?!?!!?!!?!!?/?/?/?/?/?
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(IIT毕业证)伊利诺伊理工大学毕业证成绩单专业办理
IIT毕业证原版定制【微信：176555708】【伊利诺伊理工大学毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
Design and Analysis of Algorithms-DP,Backtracking,Graphs,B&B
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Adaptive synchronous sliding control for a robot manipulator based on neural ...
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Concept of water level and rain monitering
- 1. concept of water level and Rain monitoring .
- 2. subjects: • concept of water level •water level indicator and working •water level sensors •working of water level sensors •Rain monitoring
- 3. water is a height or elevation of water in rivers,tanks,ponds,etc...... •mainly automatic water controlers ensures no over flowing of water and dry running of water pump •water level indicator gives accurate reading
- 4. working of water level indicator • water level indicator is a device that tells about the level of water • It mainly works on the principle of sensors let us consider the example of tank •In the their is a set of seven probes for the purpose of estimating the level of water
- 5. • This water level indicator consists of seven probes and a alarm with seven segment led light • last probe indicates that the tank is full • This device uses a 5v battrey to indicate level of water • with the help of IC 74555 circuits works
- 7. • as water fills upto the first probe and seven segment led indicates 1 • when it fills upto the second probe two circuits will close and it indicates 2 • this process continues upto sixth probe • when seventh probe is filled led indicates 7 and alarm gets activated.
- 8. o
- 9. uses of device: • low cost • no maintainence • less power consumption • no wastage of water
- 10. Applications of device: • Automatic water level controller will automatically START the pump set as soon as the water level falls below the predetermined level (usually 1/2 tank) and shall SWITCH OFF the pump set as soon as tank is full. • Fuel level indicator in vehicles. • Liquid level indicator in the huge containers in the companies.
- 12. Rain Monetoring: • Rain monetoring devices are also known as Rain guages. • Rain guages are the devices used for measuring amount of rainfall. • Rain guages are connected to funnel consists of cylinder which is marked in mm.
- 13. • Amount of rain can be measured with funnel.It has 10 times more cross sectional area than the normal tube. • If a cylinder catches an inch collects in the cylinder, it means an inch of rain has fallen.
- 14. • this is the way to calculate the amount of rain.