I will introduce yours with a rare, critical and costly print. The name of this print is “Burnout print”. This is a rare quality print. Burnout print is also very expensive too. It's a very nice quality print.
Flock printing or Flocking is a printing process in which Short Fibers of Rayon ,cotton wool or another Natural or synthetic Material are applied to an Adhesive –coated surface
In both print Rubbers is used as the printing paste. Crack printing is near similar as rubber printing process but additional crack paste is used before applying rubber printing paste by the screen printer on the fabric. In crack print when pull the print, it seem like crack, but rubber print only rubber and fixer are commonly used no use crack inks to produce crack effect. So when pull the rubber print, it seem like solid, smooth, plain and no crack effect.
Puff print is a common print in Fashion Industry. Some time we can call it Emboss Print or foam print . It is almost similar to the rubber print we can make this print in any color. Mainly buyer asked this print on Knitted T-Shirt.
This procedure is sometimes referred to as “Burn Out”. A cotton / polyester blended fabric can be printed with a print paste containing the burn out chemicals, and after fixation, the cotton portion is destroyed and only the polyester remains. Burn-out textiles is a technique used to develop raised designs on fabric surface. This is primarily being done in fabrics with at least 2 different fibre content i.e. Cotton-Polyester, Silk-Rayon etc.
The process of reproducing digital images on physical surfaces is called Digital Printing. The physical surfaces can be in any form like a common paper, cloth, plastic, a photographic paper, film, etc.
Flock printing or Flocking is a printing process in which Short Fibers of Rayon ,cotton wool or another Natural or synthetic Material are applied to an Adhesive –coated surface
In both print Rubbers is used as the printing paste. Crack printing is near similar as rubber printing process but additional crack paste is used before applying rubber printing paste by the screen printer on the fabric. In crack print when pull the print, it seem like crack, but rubber print only rubber and fixer are commonly used no use crack inks to produce crack effect. So when pull the rubber print, it seem like solid, smooth, plain and no crack effect.
Puff print is a common print in Fashion Industry. Some time we can call it Emboss Print or foam print . It is almost similar to the rubber print we can make this print in any color. Mainly buyer asked this print on Knitted T-Shirt.
This procedure is sometimes referred to as “Burn Out”. A cotton / polyester blended fabric can be printed with a print paste containing the burn out chemicals, and after fixation, the cotton portion is destroyed and only the polyester remains. Burn-out textiles is a technique used to develop raised designs on fabric surface. This is primarily being done in fabrics with at least 2 different fibre content i.e. Cotton-Polyester, Silk-Rayon etc.
The process of reproducing digital images on physical surfaces is called Digital Printing. The physical surfaces can be in any form like a common paper, cloth, plastic, a photographic paper, film, etc.
DEFINITION: Pigment is a substrate in a particulate form which is insoluble in water but which can be dispersed in this medium to modify its color and light scattering properties. They are organic or inorganic coloring materials. They have no affinity to textile materials. They are fixed on the textile material with the help of binding agent in form a thin invisible coating.
Basic knowledge about blend dyeing
Dyeing of Blended Fibres & Fabrics
Blends:
Blends are any textile material from fiber through yarn to fabric which are deliberate combination of chemically or physically different fibrous polymer. Cotton and Polyester blend is an example of chemically different blend and Cotton and Viscose is physically different blend because both are cellulosic.
Reason for blending:
1.Economy: The dilution of an expensive fibre by blending with a cheaper substitute.
2.Durability: The incorporation of a more durable component to extend the useful life of a relatively fragile fibre.
3.Physical properties: A compromise to take advantage of desirable performance charactristics contribuition by both fibre components.
4.Color: The development of new fabric design for garments incorporating multicolor effect.
5.Appearance: The attainment of attractive appearance & perceptible qualities using combinations of yarns of different lusture, crimp or denier which still differ in appearance even when dyed with same color.
6.Other reasons-
Blending develops fibre properties.
Colorant modification is possible by blending.
Finishing process modification.
Improved moisture absorption, antistatic characteristics, reduced pilling, improved abrasion resistance.
Dyeing Possibilities with Blends:
1.Union Dyeing:
• This is suitable for fabrics containing two fibres to dye them in a single uniform colour, each dye suitable for one kind of fibre in the blend.
• Union dyeing is same as cross dyeing except that instead of multi-colour effects. One solid colour is produced. The dyer accomplishes this by using two or more classes of dye, each of the same colours.
• Different fibres may require different dyes to obtain the same colour; this may be done by putting the appropriate colour dye that is specific to each type of fibre in to one dye bath.
• For eg: a fabric composed of rayon and acetate can be dyed with a solid colour green by using a direct dye for the rayon, and a disperse dye of the same colour for the acetate.
2.Resist/Reserve dyeing:
• In resist dyeing at least one (but not all) of the components of the blend remains essentially undyed i.e almost white.
3.Cross dyeing:
• Cross dyeing produces fibres of contrasting color
• This is two types-
a)Shadow effect/Tone-in-Tone dyeing:
Two fibres are dyed in same hue & brightness but the depth is different. It is called tone-in-tone or shadow effect.
b)Contrast effect:
Two fibres are dyed with strong difference in hue, brightness & depth.This is called contrast effect. Pleasing final appearance is important here.
Now we are in the age of printing, textile printing becomes popular day by day. Screen printing has been taken large place in textile printing sector. Trying to give a short description on it.
Handloom sector is contributing to generation rural employment and income increase, alleviating rural poverty, substituting imports, and increasing potentials for exports.The handloom weaving industry is one of the ancient cottage industries in Bangladesh.
DEFINITION: Pigment is a substrate in a particulate form which is insoluble in water but which can be dispersed in this medium to modify its color and light scattering properties. They are organic or inorganic coloring materials. They have no affinity to textile materials. They are fixed on the textile material with the help of binding agent in form a thin invisible coating.
Basic knowledge about blend dyeing
Dyeing of Blended Fibres & Fabrics
Blends:
Blends are any textile material from fiber through yarn to fabric which are deliberate combination of chemically or physically different fibrous polymer. Cotton and Polyester blend is an example of chemically different blend and Cotton and Viscose is physically different blend because both are cellulosic.
Reason for blending:
1.Economy: The dilution of an expensive fibre by blending with a cheaper substitute.
2.Durability: The incorporation of a more durable component to extend the useful life of a relatively fragile fibre.
3.Physical properties: A compromise to take advantage of desirable performance charactristics contribuition by both fibre components.
4.Color: The development of new fabric design for garments incorporating multicolor effect.
5.Appearance: The attainment of attractive appearance & perceptible qualities using combinations of yarns of different lusture, crimp or denier which still differ in appearance even when dyed with same color.
6.Other reasons-
Blending develops fibre properties.
Colorant modification is possible by blending.
Finishing process modification.
Improved moisture absorption, antistatic characteristics, reduced pilling, improved abrasion resistance.
Dyeing Possibilities with Blends:
1.Union Dyeing:
• This is suitable for fabrics containing two fibres to dye them in a single uniform colour, each dye suitable for one kind of fibre in the blend.
• Union dyeing is same as cross dyeing except that instead of multi-colour effects. One solid colour is produced. The dyer accomplishes this by using two or more classes of dye, each of the same colours.
• Different fibres may require different dyes to obtain the same colour; this may be done by putting the appropriate colour dye that is specific to each type of fibre in to one dye bath.
• For eg: a fabric composed of rayon and acetate can be dyed with a solid colour green by using a direct dye for the rayon, and a disperse dye of the same colour for the acetate.
2.Resist/Reserve dyeing:
• In resist dyeing at least one (but not all) of the components of the blend remains essentially undyed i.e almost white.
3.Cross dyeing:
• Cross dyeing produces fibres of contrasting color
• This is two types-
a)Shadow effect/Tone-in-Tone dyeing:
Two fibres are dyed in same hue & brightness but the depth is different. It is called tone-in-tone or shadow effect.
b)Contrast effect:
Two fibres are dyed with strong difference in hue, brightness & depth.This is called contrast effect. Pleasing final appearance is important here.
Now we are in the age of printing, textile printing becomes popular day by day. Screen printing has been taken large place in textile printing sector. Trying to give a short description on it.
Handloom sector is contributing to generation rural employment and income increase, alleviating rural poverty, substituting imports, and increasing potentials for exports.The handloom weaving industry is one of the ancient cottage industries in Bangladesh.
Accessories: Item that enhances the aesthetic appeal or function of a garment including belt, scarves or other objects. In generally these components are sewing less. Type of Accessories
Accessories that are carried (Small pets, toy dog, cats, birds, snakes, taking parrots)
Accessories that are worn,(Necklace, Umbrella, Bag, Parts etc.)
Trims: Materials used to ornament or enhance garments. These components are attach in the garment by sewing. (Button, Zipper, Sewing thread, Lace, tape etc.)
Above definitions are fine when those are used as individual form. What happened when these terms used as “trims and accessories” in garment manufacturing industry?
Globalization has made it easier than ever to ignore where our clothes come from. The fashion industry has complex connections to many other fields, including manufacturing, advertising, production of raw materials, transportation and retailing. Begin to educate consumers about the importance of APPAREL STANDARDS.
Garment manufacturing process from fabric to poductKarthika M Dev
This was one of my internship project which i done in SIYARAM'S in Gujarat. This is all about the process wch going in the factory from raw materials to the finished goods After a conformed order. Hope this will be helpful.
Digital printing on fabrics is a versatile technology that contains immense growth and involves ample options for different fabric uses. Know more about it with all details.
Textile printing is the most versatile and important of the methods used for introducing color and design to textile fabrics. We may print as a fabric form or apparel form
In the apparel industry, besides the artwork to be printed, the most important thing is the printing technique. There are several printing techniques, and each of them is suitable for a certain business strategy. Printing can also be defined as localized dyeing. Defined as the application of dye or pigment in a different pattern on the fabric and by subsequent after treatment of fixing the dye or pigment to get a particular design. Being a designer you may have multiple options to decide which printing techniques is most suitable for a specific design on the garment.
Advancement in technology has paved the way for a much better garment printing. The art of direct printing on garment is simplified by the technology every day. You can already choose and create your own design for t-shirts and other garments regardless of how complex the design is.Every make a Confusion about printing, i try to make it clear.
Backdropsource is the largest photography backdrops printing and studio equipment store. We are print leaders for photography backdrops, banners, posters, canvas prints, hoardings, photo backdrops, etc. We have 250 plus products and more being added daily to keep up with the changing trends and customer requirements.
For More Details Visit:
https://www.backdropsource.co.uk/collections/print-your-backdrop
Sublimation printing is used on a host of garments such as T-shirts, dresses, handbags, jeans, leggings, jackets, hoodies and more. Dedicated to new-concept digital sublimation printing on apparel and textile, We have 30 advanced digital printing machines and 6 high speed printing machines with daily output of 10000pcs or more. This technology is different from traditional printing approaches in especially final print effect.
Our digital sublimation printing has below advantages
1. Vivid printng colour, no handfeel and good color fastness, (sublimation ink)
2. Efficient arragement of samples and production.
3. Any graphic acceptable, no colour limitation
4. Customized artwork /colour decoration made by our professinal designers
5. Multiple fabric options, stylish designs, and printing solutions for your choice
6. Minimum order quantity accepted
7. OEM &ODM service avaialble Dye-sublimation fabric printing: suitable for most man-made light colour fabrics, material with at least 40% polyester will make a good printing, such as polyester+spandex, T/C, CVC, T/R, etc.
Printing effect: All over print, placement print, roll fabric print.Our service is perfet for printing/decoration of
Sublimation printing is used on a host of fashion garment such as T-shirts, dresses, handbags, jeans, leggings, jackets, hoodies and more.
Fashion garment: fashion polyester t-shirt, burnout t-shirt, dress, tank top, blouse, legging Promotional t-shirts SportswearOther items: bags, flags, pillows
Denim-Non Denim garments shade control systemAzmir Latif Beg
Shade control policy is very important to ensure one shade in one Carton specially for denim and Non denim. Its also determine shade variation within one destination or PO. Piece to Piece variation common problems found in garments due to fabric problem, mishandling of fabric rolls during cutting fabrics and bundles in sewing floor, wash problem etc.
Lycra void, damage and precaution to avoid those in washingAzmir Latif Beg
There is a lot of factor are involve behind of lycra damage. By the following preventive monitoring in every step of our manufacturing process we can get improvement all over the standard level and will be able to overcome those kinds of unwanted issues.
Mainly we have done visual inspection first after fabric received commonly follow 4 point inspection system. It's cover count/construction, width, weight, color, shading, design, measurement specifications, hand/feel and other specific quality parameters laid down by the clients.
Industrial Hazards and Their Safety Measure in Textile IndustryAzmir Latif Beg
Industrial hazard may be defined as any condition produced by industries that may cause injury or death to personnel or loss of product or property. Textile industries involve diverse operations including fiber synthesis, weaving, manufacturing, dyeing and finishing. Textile operations have been studied extensively and found numerous health and safety issues associated with the textile industry.
The ZDHC MRSL is intended to assist the apparel and footwear supply chain in phasing out the use of restricted substances by establishing enforceable limits for hazardous substances in chemical formulations used to process materials. The MRSL limits are designed to eliminate the possibility of intentional use of listed substances.
Risk Phrases (R) and Safety Phrases (S) is an important part of Chemical MSDS and Safety data sheet. We can identify hazard of a chemical by this phrases. Hazard classification should be indicated with hazard signs and hazard symbols and/or R phrases as well as S phrases.
R phrase and R number: phrases indicating the risks of hazardous preparations and substances, and their numbers respectively.
S phrase and S number: phrases related to the safe handling of hazardous preparations, and their numbers respectively.
Chemical Management System in Textile Manufacturing and Processing is required to achieve the safe use of chemicals and to control the hazards that they present to workers, the community and the environment. It can take a lot of chemicals to make clothes. The apparel sector certainly is not as chemical intensive as other global industries, but its variety of chemical operations and materials does present a range of potential hazards to its workers and the surrounding communities and environment.
NDT-Nondestructive testing is the process of inspecting, testing, or evaluating materials, components or assemblies for discontinuities, or differences in characteristics without destroying the serviceability of the part or system. In other words, when the inspection or test is completed the part can still be used.
Cotton fiber-textiles touch every aspect of our lives. For years, cotton clothing, home furnishings and industrial goods have enhanced our quality of life by providing comfort, expression and individuality. Cotton fiber possesses a variety of distinct properties, and we know there are plenty of people who want to dig a little deeper.
Apparel Merchandising-BASIC CONCEPT ON NEGOTIATION OF APPAREL COSTING AND PRO...Azmir Latif Beg
The Ready–Made Garments (RMG) sector has emerged as the biggest earner of foreign currency. The readymade garments industry acts as the backbone of our economy with a GDP of USD 130 Billion. Country‘s annual export is approximately US$ 30 billion and import is approximately US$ 37 billion. 80% of export comes from the Garments industry and as a catalyst for the development of our country. It‘s a time for us to strengthen up the quality of our textile product.
Letters of credit is a written commitment to pay, by a buyer's or importer's bank (called the issuing bank) to the seller's or exporter's bank (called the accepting bank, negotiating bank, or paying bank). It is also known as a documentary credit.
Merchandising Transactions and Managing Payment RiskAzmir Latif Beg
The truth is that every payment method involves risk. Managing payment risks in merchandising transactions is very important. The major risks are fraud and operational risk.
Steam distribution system, utilization and designAzmir Latif Beg
n any steam plant or any process plant effectiveness of steam distribution system is dependent upon the project specific conditions like location and layout of the process plant and its steam consuming equipment like heat exchangers, decorators etc. Steam distribution circuit is one of the major link between the steam production point and the point of end use i.e. process plant. Primary steam generating source are co-generation plant and Steam generators. However it not the source of steam generation but the effective and efficient steam distribution system that decides right quality (pressure and temperature) and quantity of steam to reach to the process through it. Thus designing of steam distribution is to be given due importance along with installation and subsequently maintenance during operation.
A test method is a method for a test in science or engineering, such as a physical test, chemical test, or statistical test. It is a definitive procedure that produces a test result. There are so many standards /test methods for textile testing.
In the present day world most of us are very conscious about our hygiene and cleanliness. Now a days Textile materials facing commonly mold problem during in store, in packed garment or in shipment container are not only related to microorganisms such as pathogenic bacteria, odour generating bacteria and mould fungi, but also good media for growth of microorganisms.
Fourier Transform Infrared Spectrometry (FTIR) and TextileAzmir Latif Beg
Fourier-transform infrared spectroscopy (FTIR) is a technique used to obtain an infrared spectrum of absorption or emission of a solid, liquid or gas. FTIR offers quantitative and qualitative analysis for organic and inorganic samples. Fourier Transform Infrared Spectroscopy (FTIR) identifies chemical bonds in fiber. By FTIR we only know the name of fiber is identified. By this technique we can identify the exact composition of fiber like 80 % polyester 20 % cotton.
There are many safety issues, such as fire, fall accidents, choking, chemical content, etc. It can advise you on which requirements to request with the help of EU regulations related to Product Safety. It is an independent documentation of the safety of your products by ensuring that they comply with EU standards.
Flat knitting is a method for producing knitted fabrics in which the work is turned periodically, i.e., the fabric is worked with alternating sides facing the knitter. A "Flat" or Vee Bed knitting machine consists of 2 flat needle beds arranged in an upside-down "V" formation.
A braiding machine is device, which interlaces at least three strands of yarns or wires to form a rope reinforced hose, covered power cords, and some types of lace. Materials include natural and synthetic yarns, metal wires, leather tapes and others.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
2. MD.AZMERI LATIF BEG
M. Sc in Textile Engineering
Specialized in Apparel Manufacturing,
Processing and Designing
3. Now a day’s Print is a very important
thing for textile sector. Print makes
clothes attractive. Printing sector is
also expanding and changing every
day with the fashion trend. We are
discovering new technique and
qualities of print day by day.
4. There are many kinds of print we
can do on the clothes or fabric.
Some print very basic and normal,
these prints are very cheap also.
But some print is very critical and
rare. These kinds of print are more
costly than basic normal print. But
print makes a dress or clothes
attractive and saleable.
5. Advanced garment printing is modern printing technique. Now
apparel printing is become very popular. Today’s print is a very
important thing for this textile sector. Print makes clothes attractive.
We can’t imagine a dress or clothes without print. Printing sector is
also expanding and changing every day with the fashion trend. Print
technology is growing up with the Clothes industry. 99% fashion
clothes are now must have any print on it. Printing is the production
of all active designs with well defined bound arises made by the
artistic arrangement of a motif is one or more colors. Printing is a
process for reproducing text and image, typically with ink on paper
using a printing press. Advancement in technology has paved the way
for a much better garment printing. The art of direct printing on
garment is simplified by the technology every day. You can already
choose and create your own design for t-shirts and other garments
regardless of how complex the design is. By we may get advanced
garment printing distinct and unlimited effect.
6. Advanced printing used for garments
•Digital Printing
•Flock Printing
•Flex Printing
•High Density Printing
•Foil Printing
•Puff Printing
•Cavier Bead Print
•Glitter Printing
•Metallic Print:
•Burn Out Printing
•Reflective print
•Plastisol Print
•Rubber Printing
•Crack Printing
•Spray Printing
•Transfer Printing
•Heat transfer printing
•Heat Transfer Vinyl Printing
•Floral Print
7. Now I will introduce yours
with a rare, critical and costly
print. The name of this print is
“Burnout print”. This is a rare
quality print. Burnout print is
also very expensive too. It's a
very nice quality print.
9. The printing
factory makes
this print with
the flat bed
printing
machine. The
printing way of
this print is
same as a
normal flat
bed print, just
printer’s use
10. We can do this
print only some
selected fabric.
This print is not
possible on 100%
cotton fabric. The
best composition
for this burn out
print is 60%
polyester and
40% cotton
fabric. This print
is also possible
11. The main
technique of
burnout print is
destroys the
cotton portion of
the fabric with
Acid / Chemical.
When the
chemical flow
over the fabric
and contact with
cotton portion,
then it burn out
the cotton by
12. The Burn out chemical (Acid)
and working details as
mentioned below:
1.PC or CVC fabric.
2.Paste + Any acid liberating
salt (like Nacl, Na2 so4)
3.Steaming
4.Washing
5.Burnout print complete
13. printing process of burnout print:
1st Step: Develop the print design and screen with
the buyer provided artwork.
2nd Step: Knit the fabric with the yarn of
following composition.
a) 60% polyester 40% cotton.
or
b)40% polyester 60% cotton.
or
c) 50% Polyester 50% cotton.
14. 3rd Step: After complete the kitting of
fabric send the gray or scouring fabric
to printing factory.
4th Step: Perform the print on this
fabric. Here, the cotton part will be
destroyed by the acid but polyester
portion will be remain same.
5th Step: Then we will dye and finished
the fabric as per our require color.