Bioaerosols are particles of biological origin suspended in environmental air that can include bacteria, viruses, fungi and other particles like pollen. Measuring bioaerosols in animal agriculture is important because the major sources of bioaerosols in these environments are the animals, animal wastes, feed and bedding materials. When sampling to measure bioaerosols, special considerations must be made to account for the specific characteristics of bioaerosols and challenges of sampling in animal facilities to ensure an accurate and representative sample is collected.
Air Microbiology. Aerobiology is defined as the study of life present in the air. Aeromicrobiology relates to the study of environmentally relevant microorganisms. ... In dry whether the microbial load of air is high while in wet weather the rain washes the microorganisms from the air.
The hard fibrous material that forms the main substance of the trunk or branches of a tree or shrub, used for fuel or timber.
Wood is a versatile material with many uses, namely: for building shelter, wood works, canoes, for making paper, for coal production etc
Air Microbiology. Aerobiology is defined as the study of life present in the air. Aeromicrobiology relates to the study of environmentally relevant microorganisms. ... In dry whether the microbial load of air is high while in wet weather the rain washes the microorganisms from the air.
The hard fibrous material that forms the main substance of the trunk or branches of a tree or shrub, used for fuel or timber.
Wood is a versatile material with many uses, namely: for building shelter, wood works, canoes, for making paper, for coal production etc
Nowadays by seeing the present scenario AIR is the essential element to live & Air Quality Index is a tool to distinguish the benefit of air quality. There are different methods to identify AQI, based on many impurities viz. PM2.5, PM10,CO were used to compare ambient air quality. By calculating AQI we define the quality level of air to be good, moderate, and hazardous as AQI is calculated by using the reference of "The United States Environmental Protection Agency" We are using thingspeak server to fetch the data into the cloud, so anyone can access the data in their respective location. We are not only focusing on stationary measurement but also on the real time value measurement of AQI. Which helps common people to access the Air Quality Index throughout the city and help them decide to stay in a cleaner air environment? Thus the foremost idea of AQI is to inform people about their air quality so they can step to defend their health.
Air microbiology study of microbes suspended in air. Microflora of air depend on the location and environmental condition at particular place. There are different types of air trapping devices like Slit Sampler, Andersons samplers, Impingers etc. Air borne diseases mainly spread by droplet infection, contact with infected things . Air borne diseases are discussed and concluded with control of air borne microbes.
This presentation is about air pollution. There are various topics related to air pollution such as definition, major pollutants, causes of air pollution, effects of air pollution on earth and how to reduce air pollution.
The present study was an effort to obtain paint degrading bacterial isolate from wall scrapings. The study included that microorganisms such as bacteria, not only cause discoloration of paint surfaces but also, they can directly cause degradation of the materials through their metabolic activities. The Halophilic microorganisms are well known for their paint degrading activity. As evidenced from the literature survey, there is a great diversity of bacteria and fungi that are capable of growing on paint coating. The presence of various polymer compounds used in paint manufacturing makes it resistant to degradation and continue to be a potential hazard to the environment as well as humans. Use of nonabrasive and environmentally safe methods, to reduce the impact of microbial activities can further reduce the damage as well as help in bioremediation of paint contaminated water, soil and environments to clean up.
Indoor Air Quality -- The Basics And MoreMartyRayToo
This presentation covers the basics of Indoor Air Quality -- and much more. From actinomycetes to VOCs, we hope you find this primer on IAQ to be useful and informative. (c) 2002-2011 Michaels Engineering Inc.
Nowadays by seeing the present scenario AIR is the essential element to live & Air Quality Index is a tool to distinguish the benefit of air quality. There are different methods to identify AQI, based on many impurities viz. PM2.5, PM10,CO were used to compare ambient air quality. By calculating AQI we define the quality level of air to be good, moderate, and hazardous as AQI is calculated by using the reference of "The United States Environmental Protection Agency" We are using thingspeak server to fetch the data into the cloud, so anyone can access the data in their respective location. We are not only focusing on stationary measurement but also on the real time value measurement of AQI. Which helps common people to access the Air Quality Index throughout the city and help them decide to stay in a cleaner air environment? Thus the foremost idea of AQI is to inform people about their air quality so they can step to defend their health.
Air microbiology study of microbes suspended in air. Microflora of air depend on the location and environmental condition at particular place. There are different types of air trapping devices like Slit Sampler, Andersons samplers, Impingers etc. Air borne diseases mainly spread by droplet infection, contact with infected things . Air borne diseases are discussed and concluded with control of air borne microbes.
This presentation is about air pollution. There are various topics related to air pollution such as definition, major pollutants, causes of air pollution, effects of air pollution on earth and how to reduce air pollution.
The present study was an effort to obtain paint degrading bacterial isolate from wall scrapings. The study included that microorganisms such as bacteria, not only cause discoloration of paint surfaces but also, they can directly cause degradation of the materials through their metabolic activities. The Halophilic microorganisms are well known for their paint degrading activity. As evidenced from the literature survey, there is a great diversity of bacteria and fungi that are capable of growing on paint coating. The presence of various polymer compounds used in paint manufacturing makes it resistant to degradation and continue to be a potential hazard to the environment as well as humans. Use of nonabrasive and environmentally safe methods, to reduce the impact of microbial activities can further reduce the damage as well as help in bioremediation of paint contaminated water, soil and environments to clean up.
Indoor Air Quality -- The Basics And MoreMartyRayToo
This presentation covers the basics of Indoor Air Quality -- and much more. From actinomycetes to VOCs, we hope you find this primer on IAQ to be useful and informative. (c) 2002-2011 Michaels Engineering Inc.
Environmental health is the branch of public health concerned with all aspects of the natural and built environment affecting human health. In order to effectively control factors that may affect health, the requirements that must be met in order to create a healthy environment must be determined.[1] The major sub-disciplines of environmental health are environmental science, toxicology, environmental epidemiology, and environmental and occupational medicine.[2]
Definitions
WHO definitions
Environmental health was defined in a 1989 document by the World Health Organization (WHO) as: Those aspects of human health and disease that are determined by factors in the environment.[citation needed] It is also referred to as the theory and practice of accessing and controlling factors in the environment that can potentially affect health.[citation needed]
A 1990 WHO document states that environmental health, as used by the WHO Regional Office for Europe, "includes both the direct pathological effects of chemicals, radiation and some biological agents, and the effects (often indirect) on health and well being of the broad physical, psychological, social and cultural environment, which includes housing, urban development, land use and transport."[3]
As of 2016, the WHO website on environmental health states that "Environmental health addresses all the physical, chemical, and biological factors external to a person, and all the related factors impacting behaviours. It encompasses the assessment and control of those environmental factors that can potentially affect health. It is targeted towards preventing disease and creating health-supportive environments. This definition excludes behaviour not related to environment, as well as behaviour related to the social and cultural environment, as well as genetics."[4]
The WHO has also defined environmental health services as "those services which implement environmental health policies through monitoring and control activities. They also carry out that role by promoting the improvement of environmental parameters and by encouraging the use of environmentally friendly and healthy technologies and behaviors. They also have a leading role in developing and suggesting new policy areas."[5][6]
Other considerations
The term environmental medicine may be seen as a medical specialty, or branch of the broader field of environmental health.[7][8] Terminology is not fully established, and in many European countries they are used interchangeably.[9]
Children's environmental health is the academic discipline that studies how environmental exposures in early life—chemical, nutritional, and social—influence health and development in childhood and across the entire human life span.[10]
Other terms referring to or concerning environmental health include environmental public health and health protection.
Disciplines
Five basic disciplines generally contribute to the field of environmental health: environmental epidemiology,
"Bio - Warfare During Host Pathogen Interactions in Indigenous Crop Plants" b...Md. Kamaruzzaman
This is a analysis of some collected information of the subject of my M.S. theory semester. Course title was Plant Pathogenesis and Genetics of Plant Pathogens
Bio-control agents:Insecticidal toxins of Bacillus thuringiensisManisha G
This presentation is all about bio control agents, stressing more about the use of insecticidal toxins of Bacillus thuringiensis as potent biocontrol agent.
Introduction to Basic Pharmaceutical MicrobiologyChittaranjan Das
Contains basic of pharmaceutical microbiology and major microflora in the cleanroom. Microorganisms like bacteria and fungi. Common microorganisms in the cleanroom and diseases they produce. Biofilm in the pharmaceutical cleanroom.
Microbiology is a branch of science that deals with microbes. The term microbiology derives its name from three Greek words mikros [small] bios [life] and logos [study]. Microbiology focus on the occurrence and distribution of microorganisms in nature, their structure, physiology, reproduction, metabolism and classification.
Microbes - Microorganisms are tiny and invisible to naked eye. They can be seen only by magnifying their image with a microscope. Small subcellular or cellular living beings with milli-micron or micron in size and are not visible to our naked eyes are called micro-organisms. Microorganisms include the cellular organisms like bacteria, fungi, algae and protozoa. Viruses are also included as one of the microorganism but they are acellular.
Animal agriculture adaptation planning guide (climate change)LPE Learning Center
This 44-page publication produced by the AACC project is a planning guide to help guide farmers through the process of future farm planning considering climate change.
Format: Factsheet or Publication - Reference: Schmidt, D., E. Whitefield, D. Smith. 2014. Produced for Animal Agriculture in a Changing Climate Project.
What is the difference when talking about weather versus climate? How do you measure and describe the atmosphere? How are models used in predicting weather or climate? For more on this topic, visit: http://extension.org/60702
What are some of the basic principles and terminology involved in climate change? Learn more about the Earth's atmosphere, energy balance, and how the greenhouse effect can alter both climate and weather. What is climate forcing? What is climate feedback? For more on this topic, visit: http://extension.org/60702
The current state of cap-and-trade in the U.S. and the mandatory greenhouse g...LPE Learning Center
Where is U.S. policy and voluntary markets current at in terms of cap-and-trade? What is the mandatory greenhouse gas reporting rule and how does it apply to animal agriculture? For more on this topic, visit: http://extension.org/60702
Mitigation of greenhouse gas emissions in animal agricultureLPE Learning Center
What steps can animal agriculture take to reduce (mitigate) the greenhouse gas emissions from their farms? What is carbon sequestration and how will that play a role? For more on this topic, visit: http://extension.org/60702
Contribution of greenhouse gas emissions: animal agriculture in perspectiveLPE Learning Center
What are the emissions of relevant greenhouse gases from animal agriculture production and how does that compare to other industries? For more on this topic, visit: http://extension.org/60702
User capabilities and next generation phosphorus (p) indicesLPE Learning Center
Full proceedings available at: http://www.extension.org/72814
The phosphorus (P) index is the primary approach to identify field management strategies and/or manure application strategies likely to lead to excessive risk of P loss. It has been over 40 years since the first research connecting agronomic P management and water quality and over 20 years since the initial publication defining a P Index. This session will consider opportunities to build on and expand existing P Index strategies to make them more effective at protecting water quality and friendlier to the target user.
Full proceedings available at: http://www.extension.org/72818
Phosphorus indices provide relative loss ratings that then have a corresponding management response. Because most state Phosphorus Indices are qualitative it is not clear how the relative loss rating corresponds to actual phosphorus inputs into the receiving water and how the receiving water would react to these additions. Even with qualitative Phosphorus Indices, unless the water resource has a specific Total Maximum Daily Load, it is not clear how losses correspond to water quality outcomes. These issues will be discussed in the context of the 590 Natural Resources Conservation Standard for nutrient management.
Full proceedings available at: http://www.extension.org/72868
There has been a tremendous amount of activity and funding of conservation programs with regional and watershed-specific cost-share initiatives. While there have been some successes, water quality response in many areas has not been as great as expected. This has led many to question the efficacy of these measures and to call for stricter land and nutrient management strategies. In many cases, this limited response has been due to the legacies of past management activities, where sinks and stores of phosphorus along the land-freshwater continuum mask the effects of reductions in edge-of-field losses of phosphorus.
Estimation of phosphorus loss from agricultural land in the southern region o...LPE Learning Center
Full Proceedings is available at: http://www.extension.org/72817
The purpose of our work was to determine, within the southern region (AL, AR, FL, GA, KY, LA, MS, NC, OK, SC, TN, and TX), the feasibility of using different models to determine potential phosphorus loss from agricultural fields in lieu of phosphorus indices.
Estimation of phosphorus loss from agricultural land in the heartland region ...LPE Learning Center
Full Proceedings is available at: http://www.extension.org/72813
Phosphorus (P) indices are a key tool to minimize P loss from agricultural fields but there is insufficient water quality data to fully test them. Our goal is to use the Agricultural Policy/Environmental eXtender Model (APEX), calibrated with existing edge-of-field runoff data, to refine P indices and demonstrate their utility as a field assessment tool capable of protecting water quality. In this phase of the project our goal is to use existing small-watershed data from the Heartland Region (IA, KS, MO and NE) to determine the level of calibration needed for APEX before using the model to generate estimates of P loads appropriate for evaluating a P Index.
Checking ambition with reality the pros and cons of different approaches to s...LPE Learning Center
Full proceedings available at: http://www.extension.org/72793
The revision of the USDA-NRCS national standard for nutrient management in 2011 was driven, in part, by inconsistencies in state phosphorus (P) indices, rekindling debates over standardizing indices at regional or national scales. Reasonable arguments exist for maintaining the status quo, which allows for state specific site assessment approaches, as well as for regional and national P Indices, which would take advantage of expertise, resources and technologies that may not exist locally. In addition, a diversity of site assessment approaches have now been proposed that differ from the original P Index. Understanding the benefits and limitations provided with these approaches is key to advancing site assessment for P management.
Removing phosphorus from drainage water the phosphorus removal structureLPE Learning Center
Full proceedings available at: http://www.extension.org/72839
We constructed a phosphorus (P) removal structure on a poultry farm in Eastern OK; this is a BMP that can remove dissolved P loading in the short term until soil legacy P concentrations decrease below levels of environmental concern. A P removal structure contains P sorbing materials (PSMs) and are placed in a location to intercept runoff or subsurface drainage with high dissolved P concentrations. As high P water flows through the PSMs, dissolved P is sorbed onto the materials by several potential mechanisms, allowing low P water to exit the structure. While they vary in form, P removal structures contain three main elements: 1) use of a filter material that has a high affinity for P, 2) containment of the material, and 3) the ability to remove that material and replace it after it becomes saturated with P and is no longer effective.
Legacy phosphorus in calcareous soils effects of long term poultry litter app...LPE Learning Center
Full proceedings available at: http://www.extension.org/72864
Livestock manures, including poultry litter, are often applied to soil as crop fertilizer or as a disposal mechanism near livestock housing. Manures can improve soil quality and fertility; however, over-application can result in negative environmental consequences, such as eutrophication of surface waters following runoff of soluble or particulate-associate phosphorus (P). In soil, P exists in many forms (inorganic/organic, labile/stable) and the fate of manure P is highly dependent upon soil properties, including soil texture and microbial activity. The Houston Black series is a calcareous (~17% calcium carbonate), high-clay soil that occupies roughly 12.6 million acres in east-central Texas. These Blackland vertizols are agronomically important for the production of cotton, corn, hay, and other crops, but their high calcium and clay content could lead to accumulation of P in forms that are not readily available for plant utilization. Accumulated P could serve as a source of legacy P if mineralized or otherwise transformed in situ or transported with soil particles in runoff.
Identify and synthesize methods to refine phosphorus indices from three regio...LPE Learning Center
The full proceedings paper is at: http://www.extension.org/72867
This project was started to work with regional CIG projects to calibrate and harmonize Phosphorus Indices across the U.S., demonstrate their accuracy in identifying the magnitude and extent of phosphorus loss risk, and provide suggestions to refine or improve existing Indices. This research is important to provide consistency among state Phosphorus Indices and their subsequent recommendations.
Modeling phosphorus runoff in the chesapeake bay region to test the phosphoru...LPE Learning Center
Full Proceedings available at: http://www.extension.org/72795
The revision of USDA-NRCS’s standard for nutrient management coincided with significant assessment of the performance of Phosphorus (P) Indices in the six states that are tied to the Chesapeake Bay watershed. The 64,000 square mile watershed is the focus of unprecedented activity around nutrient management as a result of a 2011 Total Maximum Daily Load for P, nitrogen (N), and sediment under the Clean Water Act. In addition, the state of Maryland had required updates to it’s original P Index, resulting in broad scrutiny by various interest groups. Within this setting, USDA-NRCS funded a multi-state project to help advance the testing and harmonization of P-based management in the Chesapeake region.
Modeling phosphorus runoff in the chesapeake bay region to test the phosphoru...
Bioaerosol sampling final
1. AIR QUALITY
Bioaerosol Sampling in Animal Environments
Measuring: Bioaerosols
AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE March 2012
Lingjuan Wang Li, Associate Professor
Department of Biological and Agricultural Bioaerosols in General
Engineering, North Carolina State
University B ioaerosols are particles of biological origin suspended in the air. In outdoor air,
Otto D. Simmons III, Research Assistant 30 percent of all particles larger than 0.2 µm appear to be of biological origin.1 Particle
sizes and natural background concentrations of bioaerosols have been reported as
Professor, Department of Biological and
following:
Agricultural Engineering, North Carolina
State University
Table 1. Bioaerosol sizes and concentrations in natural background2.
Eileen Fabian Wheeler, Professor,
Agricultural Engineering Type of Bioaerosols Size (µm) Concentration (#/m3)
The Pennsylvania State University
Viruses 0.02-0.3 ---
Bacteria 0.3-10 0.5 – 1,000
Fungal Spores 0.5-30 0 – 10,000
This publication discusses Pollen 10-100 1 – 1,000
different samplers that can be
As shown in Table 1, bioaerosols cover a wide size range, of which viruses are
used for collecting bioaerosols the smallest. Viruses, bacteria, and fungal spores that are capable of causing disease
from environmental air and are referred to as pathogens. Some pathogens are specific for certain hosts, like hu-
considerations for choosing a mans or animals, while others can infect a wide host range that may include humans
as well as animals. Those pathogens capable of infecting both humans as well as
suitable sampler. other animals are called zoonotic pathogens.
Contents
Bioaerosol Classification
Bioaerosol Sampling................4
Depending upon their biological characteristics, bioaerosols can be classified into
Bioaerosol Samplers................6 the following types:
Biological Analysis.................12
Summary...............................14 Viruses
References............................15
Viruses can infect and reproduce only inside a susceptible host cell. As intracel-
lular parasites, viruses never replicate on nonliving substrates in the environment.
Several facts about viruses include2:
eXtension • Naked viruses range in size from 0.02 – 0.3 µm.
• Most airborne viruses are part of droplet nuclei or attached to other particles with
Air Quality in Animal Agriculture a wide range of sizes.
http://www.extension.org/pages/ • Airborne viruses are transmitted by direct contact, or by inhalation of aerosolized
15538/air-quality-in-animal-agriculture viruses.
• Aerosolization of viruses may occur by coughing, sneezing, or talking.
• Under favorable ambient conditions (temperature, humidity, etc.), most viruses
can survive for weeks.
Mitigation FS-1 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 3
1
2. Bacteria
Bacteria are single-celled organisms that range in size from 0.3 to10 µm. Several
facts about bacteria include2:
• Bacteria are generally spherical or rod-shaped.
• Bacteria often occur as clusters or chains.
Bioaerosols • Under ambient conditions, bacteria colonize water or soil and will be released as
aerosols when the water or soil is disturbed.
are particles of • In indoor environments, bacteria can survive and colonize in moist environments,
such as ventilation systems, and are aerosolized by air currents or vibration.
biological origin that
are suspended in In addition, bacteria can be classified into two groups based upon their ability to
retain crystal violet dye1:
environmental air.
• Gram-positive bacteria (retain the dye) have cell walls that consist mainly of
peptidoglycan, which can cause adverse health effects.
• Gram-negative bacteria (don’t retain the dye) have cell walls that contain an outer
membrane composed of lipopolysaccharides (endotoxin), lipoprotein, and other
complex macromolecules that can cause adverse health effects.
Specifically, endotoxins in the outer membrane of Gram-negative bacteria are chemically
stable and heat resistant. Endotoxins are released when the bacterial cells are lysed
and will maintain their biological activity (i.e., adverse health effects), even after the
bacterial cells are no longer viable. Moreover, they are abundant in agricultural environ-
ments, with the highest reported airborne endotoxin levels of 2 to 7 µg/m3 in cotton
mills and are associated with fecal material in agriculture or wastewater treatment. For
comparison, ambient background levels of endotoxins in most outdoor environments
are in the subnanogram range. The adverse health effects associated with exposure to
endotoxins include fever, malaise, changes in white blood cell counts, and respiratory
distress.
Fungi
Fungi are a unique group of organisms that can occur as single-celled organisms
(e.g., yeasts) or as multicellular branching structures. To date, 70,000 of 1.5 million
known fungi have been identified and classified2. They are grouped based upon their
methods of spore production. Most adverse health effects associated with fungi
include allergic reactions and respiratory diseases.
Pollen
Pollen grains, produced by plants to transmit genetic material, are near spheri-
cal particles that range in size from 10 to 100 µm, with most between 25 and 50 µm.
Although pollen grains are not in the respirable size fraction (can deposit in the lungs),
they may contain allergens that lead to adverse health effects in the upper airways (hay
fever). In addition, airborne pollen grains are resistant to environmental stresses (e.g.,
desiccation [drying out], etc.) and may be transported by insects or wind over a wide
geographical range.
Bioaerosol Viability and Infectivity
Once released, bioaerosols may travel considerable distances due to atmospheric
dispersion. The ability of bioaerosols to cause adverse health effects or to initiate
disease depends upon their ability to survive and remain infectious in the environment,
as well as their exposure to a susceptible host. The survival or viability of bioaerosols is
referred to as their ability to replicate, whereas the infectivity of bioaerosols is referred
to as their ability to cause infection. Factors that influence bioaerosol viability and
infectivity include:
2 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
3. Relative Humidity and Temperature
Many bioaerosols are hygroscopic (can readily take up and retain water from the
environment). After their generation, the viability of bioaerosols are impacted by the Bioaerosols can be
rate of water transfer (dehydration or rehydration), which is dependent upon relative
humidity (RH) and temperature in their environment. Most bioaerosols tend to lose made up of many
viability due to desiccation3 (drying out).
different types of
Oxygen
Oxygen can be toxic for some species of microorganisms. Anaerobic airborne particles, including
bacteria may lose viability due to oxygen toxicity, with their survival dependent upon
storage time, oxygen concentration, and RH3. However, most bacterial species in
bacteria, viruses,
animal building aerosols are facultative anaerobes, which means that they thrive under
low oxygen conditions but can survive and remain viable over long periods of time
parasites, fungi,
when exposed to ambient levels of oxygen in the environment. and other particles,
Other Pollutants such as pollen, that
It has been reported that pollutants such as sulfur oxides and nitrogen oxides have
less effect on bioaerosols than ozone. Outdoor bioaerosol survival of many species may lead to adverse
is much poorer than those indoors due to the presence of ozone in outdoor environ-
ments. Because of this, the spread of airborne diseases is more likely indoors than health effects in an
outdoors3.
exposed population.
Radiation
Energetic radiation (e.g., UV) induces free-radical mediated reactions causing dam-
age of nucleic acid, protein, sugar, lipid, and membranes within microbes. Long wave
radiation (e.g., microwave) has much lower energy, and is considered to have limited
impact on bioaerosol viability3.
Bioaerosols in Animal Environments
In intensive livestock production systems, bioaerosols are often rich in both variety
and number3. The major sources of bioaerosols are animals, animal wastes, feed, and
bedding materials. The nature and concentration of bioaerosols in animal environments
may be essential in the etiology of animal diseases. It has been reported that patho-
gens of livestock transmitted through the air may cause infectious diseases in farm
animals, as well as in human farm workers and residents living in close proximity to
farms. Table 2 lists some of the diseases that have been linked with airborne patho-
gens in animal houses. The common pathogenic bioaerosols identified in poultry and
pig houses are listed in Table 3.
Table 2. Common infectious disease of farm animals and pathogens3
Host Diseases Factors implicated in causation
pathogens environment
Atrophic rhinitis Bordetella bronchiseptica Crowding
pigs Pasteurella multocida Poor ventilation
Enzootic pneumonia Mycoplasma suipneumoniae Poor drainage, high relative humidity
Diarrhea Pneumonia Rotavirus, E. Coli, etc. Weaning, hygiene, cold
Mycoplasma bovis, dispar Crowding, poor feeding
cattle Shipping fever P. haemolytica, etc. High relative humidity, stress
Environmental E. Coli, strep. uberis Contaminated bedding, stage of lactation
mastitis
horses Obstructive Mycropolyspora faeni Dusty feed and bedding, poor ventilation
pulmonary disease Aspergillus fumigatus
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 3
4. Table 3. Common pathogenic bioaerosols identified in poultry and pig houses3
Bacteria Fungi Viruses
Bordetella bronchiseptica Aspergillus flavus African swine fever
Brucella suis Aspergillus fumigatus Avian encephalomyelites
Corynebacterium equi Aspergillus nidulans Avian leukosis
Erysipelothrix rhusiopathiae Aspergillus niger Foot-and-mouth disease
Escherichia coli Coccidioides immitis Fowl plague
Haemophilus gallinarus Cryptococcus neoformans Hog cholera
Haemophilus parasuls Histoplasma farcinorum Inclusion body rhinitis
Haemophilus pleuropneumoniae Rhinosporidium seeberi Infectious bronchitis of fowls
Listeria moncytogenes Infectious laryngotracheitis of fowls
Leptospira pomona Infectious nephrosis of fowls
Mycobacterium arium Infectious porcine encephalomyelitis
Mycobacterium tuberculosis Marek’s disease
Mycoplasma gallisepticum Onithosis
Mycoplasma hyorhinus Porcine enterovirus
Mycoplasma suipneumoniae Swine influenza
Pasteurella multocida Transmissible gastroenteritis of swine
Pasteurella pseudotuberculosis
Salmonella typhimurium
Straphylococcus aereus
Streptococcus suis type II
Bioaerosol Sampling
General Sampling Considerations
The specific characteristics of bioaerosols have great impacts on appropriate
methods for sampling. In general, bioaerosol sampling applies the same sampling
principles as those used for nonbiological aerosols. However, preservation of biologi-
cal characteristics (e.g., viability) during and after sample collection makes bioaerosol
sampling slightly different from nonbioaerosol sampling. Moreover, sample handling,
storage, and analysis are different in bioaerosol sampling from that in nonbioaerosol
sampling. The following factors require special consideration when planning to mea-
sure bioaerosols:
The major sources
Objectives of Bioaerosol Sampling
of bioaerosols are Bioaerosol sampling plans should begin by determining the purpose of sampling. In
general, bioaerosol sampling objectives include:
animals, animal
• verification and quantification of bioaerosol present (specific species or total bio-
wastes, feed, and aerosols),
bedding materials. • identification of sources that could lead to control and mitigation of bioaerosols,
and
• subsequent monitoring to ensure the effectiveness of control measures imple-
mented.
Temporal and Spatial Variations in Bioaerosol Concentrations
Bioaerosol concentrations generally have considerable variation temporally and
spatially because bioaerosol sources don’t necessarily generate bioaerosols continu-
ously. The time and space dependant characteristics in bioaerosol concentrations have
great effect on determining the optimal sampling duration and location. In addition,
since no single sampling technique is capable of collecting, identifying, and quantify-
ing all of the biological species of interest in the environment, it may require a source
inventory or a preliminary microbiological analysis of possible sources to determine an
appropriate sampling strategy.
4 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
5. Overall Sampling Performance
Overall sampling efficiency of a bioaerosol sampling system ensures accuracy in
bioaerosol sampling and analysis. The overall performance of a bioaerosol sampler is
determined by two factors:
• physical factors: inlet sampling efficiency and collection efficiency, and
• biological factors: preserving biological characteristics (e.g., viability) of bioaerosol
particles during sampling and accurate biological analysis for identification and
quantification of sampled bioaerosol particles.
Bioaerosol Sampling in Animal Environments
Challenges for Bioaerosol Sampling in
Animal Facilities
In animal environments, bioaerosols cover a broad range of particle sizes and are
rich in microbial species. During the sampling process, bioaerosol particles must be
collected from air using an appropriate sampling protocol that will minimize bias in both
physical and biological aspects mentioned previously. The following challenges should
be addressed when determining an appropriate sampling protocol to fulfill a specific
sampling objective3:
High Concentrations of Bioaerosols
High levels of bioaerosols present in animal houses may overload some sam- The specific
plers. In some cases, sampling times need to be shortened, or in other cases, a diluter
system may be required for the sampling. characteristics of
Requirement for Multiple Sampling Methods bioaerosols have
Many diverse microbial species comprise bioaerosols in animal houses. For some
studies, a comprehensive quantitative and qualitative analysis is necessary, which may great impacts
require the use of multiple sampling and analysis methods.
on appropriate
Practical Constraints
Due to the overall high levels of microbes associated with large numbers of ani-
methods for
mals being housed within limited spatial restrictions, some practical constraints are al-
ways related to bioaerosol sampling in animal houses. Several of these considerations
sampling.
might be: proximity to the animals, proximity to the ventilation systems, and timing
related to the life cycle of flocks or herds, as well as other logistical considerations.
Bioaerosol Sampling Processes
In general, bioaerosol sampling involves three main processes:
• Collecting a Representative Sample
Bioaerosol sampling aims to take a sample that is physically and biologically repre-
sentative of the system. This process includes:
Determining location and number of sampling sites,
Selecting an appropriate sampler or sampling system, and
Determining sampling duration and frequency.
• Conditioning and Transporting the Collected Sample
Once the bioaerosol sample has been taken, it must be conditioned and transport-
ed to a microbiology lab for further analysis. Precautions should be taken so the physi-
cal and biological properties of the sample are preserved (i.e., refrigeration, observing
sample holding times, etc.).
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 5
6. • Analyzing the Samples for Biological Properties
The selection of Due to the complex nature of bioaerosols in animal houses, no single biological
suitable bioaerosol analytic method is perfectly suited to study bioaerosols collected from animal housing
facilities. Several different analytical methods may be employed to meet the objectives
samplers is guided of the study/sampling.
by the objectives
Bioaerosol Samplers
of sampling as well
as the types and Principles of Bioaerosol Collection
levels of bioaerosols
Similar to sampling for general particles in air, bioaerosol sampling also involves
of interest in the physical separation of particles from the air stream. One of the most common particle
collection methods for bioaerosol sampling is inertial separation. Figure 1 summarizes
environment to be collection mechanisms for different types of inertial bioaerosol samplers.
sampled. 1. Inertial impaction: the inertial of the particle forces its
impaction onto a solid or semisolid impaction surface (a
cultural medium or an adhesive surface) that can
be examined microscopically. The application of this prin-
ciple in bioaerosol sampling includes:
• Single-stage impactors: the surface air sampler
(PBI, SPI)
• Cascade impactors: two or more impaction stages
(the Anderson cascade impactor)
• Slit samplers: the impaction stage consists of one
or more slits instead of one or more circle holes
(CAS, NBS, BAS cultural plate samplers)
2. Centrifugal inertial impaction: particle separation by centrifu-
gal force in a radial geometry (Reuter centrifugal sampler,
BIO)
3. Liquid impingement: the particles are collected by inertial
impaction into a liquid, and particle diffusion within the
bubbles (the AGI-4 and AGI-30 impingers)
4. Tangential impingement: collects particles by inertial impac-
tion and centrifugation (BioSampler SKC)
Figure 1. Collection principles for different inertial bioaerosol samplers1
In addition to intertial separation, filteration is another common type of collection
method used for aerosol sampling. For this method, impaction, interception, diffusion,
and electrostactic attraction contribute to the deposition of particles onto the filter
medium.
6 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
7. Sampling Efficiency of Bioaerosol Samplers
The overall sampling efficiency of a bioaerosol sampler is dictated by the following
components1,2:
• the inlet sampling efficiency, which is the same as for non-bioaerosol sampling
and depends on the size, shape, and aerodynamics of the particles being sampled,
• collection/deposition efficiency onto glass slides or a semisolid culture medium,
and
• the biological aspects of sampling efficiency, which depend on collection of
biological particles without altering their viability or biological activity and use of
robust microbial analytical methods to identify and quantify the biological particles
present in the air parcels sampled.
Bioaerosol Concentration Determination
Some bioaerosol particles, such as bacteria and fungi, can grow and replicate
to form a colony after being collected on a nutrient or solid surface. Counts of these
colonies are expressed as “colony-forming units,” or cfu. For bioaerosol analyses, the
term “cfu” is used to quantify numbers of viable microbes, with the concentration of
bioaerosols defined as cfu per unit volume of air sampled, e.g., cfu/m3.
During the sampling period t, the volume of sampled air can be calculated by the
following equation:
V = Q * t (1)
Where V is the volume of sampled air in m3, Q is the flow rate of the sampling
system in m3/min, and t is the sampling time in minutes.
The average concentration of bioaerosols is determined by the following equation:
N
C=
Q * t (2)
Where C is the average concentration of bioaerosols in cfu/m3, N is the number of
viable bioaerosol particles collected on the impaction substrate, in cfu.
Optimal Sampling Time Determination
In animal environments, the concentrations of bioaerosols vary with time. Suf-
ficiently long collection times or multiple samples with short collection times may be
required during periods of changing concentration so that collected sample(s) may
properly represent the average environmental concentration over some time period1.
As shown in Figure 2, the bioaerosol concentration varies in a sampled air
volume (V) during the sampling period t (from ts to tf). During this sampling process,
the number of particles per unit area varies with bioaerosol particle concentration in
the sampled air. This results in a change in surface density (d) of the sample, which
equates to the number of particles on the surface per viewing area (A), i.e., microbial
colonies on a petri dish. The surface density of a bioaerosol sample is determined by
the following equation1:
N C*Q
δ= = *t
A A (3)
Where d is the surface density of a bioaerosol sample in cfu/m2, A is the viewing
area (i.e., petri dish) in m2.
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 7
8. The selection of
suitable bioaerosol
samplers is guided Figure 2. Bioaerosol sampling process1
by the objectives
of sampling as well In general, post analyses of bioaerosol samples include viewing, counting, and
identifying the particles within the sample. This can occur following collection by
as the types and viewing the collected particles under a microscope, or it may occur after an incubation
period, which allows the colonies to grow to sufficient size so they can be counted
levels of bioaerosols without magnification. An accurate quantification of bioaerosols in a sample may only
be obtained if the surface density of organisms is optimal, do. If the sample surface
of interest in the density is very low, d<<do sampling and counting errors may be high. As a result, the
calculated concentration may not be accurate and may misrepresent the true concen-
environment to be tration in the original air sampled. On the other hand, if the sample surface density is
very high, d>>do, the particles may be located in close proximity to each other, where-
sampled. by the collected organisms may grow together or may inhibit each other’s growth such
that accurate counting and identification may not be possible.
As shown in equation 3, the surface density of a bioaerosol sample collected on
a substrate is linearly related to sampling time. To avoid insufficiently-loaded samples
(d<<do) and overloaded samples (d>>do), the sampling time should be adjusted ac-
cordingly. The optimal sampling time for a given bioaerosol concentration depends
upon sampler flow rate and collection surface area as demonstrated by the following
equation1:
A
to = * δo
Q*C (4)
The calculated optimal sampling times for several commercially available bio-
aerosol samplers are illustrated in Figure 3 (left). Impinger samples are not sensitive
to under- or overloading during sampling because the liquid sample can be diluted or
concentrated following sample collection, depending on the concentration of collected
bioaerosol particles in the liquid. However, evaporation of sampling liquid and reaero-
solization of prior-collected particles limit the sampling time for most impingers. Figure
3 (right) also illustrates optimal sampling time for impingers at a sampling flow rate of
12.5 l/min.
8 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
9. Figure 3. Optimal sampling times for selected bioaerosol samplers1
Table 4. Commonly used and commercially available bioaerosol samplers1
Sampler Manufacturer/ Notes
Supplier
Inertial impactors • Air-O-Cell and Burkard samplers — the slit
Air-O-Cell® ZAA/SKC impactors, on microscope slides or tape
Allergenco Air Sampler (MK-3) ALL • SAS amplers — portable one-stage,
Andersen Samplers, 1-, 2-, or 6-stage AND multiple-hole impactors
Burkard Sampler BUR • The Reuter centrifugal sampler (RCS) —
Casella Airborne Bacteria Sampler (MK-II) CAS portable — d50 = 3.8 µm
Mattson-Garvin Slit Sampler • The AGI-30 and the AGI-40 can only be
Rotorod BAR used with water-based collection fluids
Surface Air Sampler (SAS) SAM • The BioSampler can be used with
PBI/SPI nonevaporative liquids (mineral oil) — it
permits long sampling time. This type
Centrifugal impactors of sampler utilizes several sampling
BioSampler SKC principles, including centrifugal forces and
Multistage Liquid Impinger BUR tangential impingement
Reuter Centrifugal Sampler (RCS) BIO
Impingers
AGI-4, AGI-30 AGI/HAM/MIL
BioSampler SKC
Filter samplers
37-mm Cassette CCO/MIL/SKC
Button Sampler SKC
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 9
10. Selection of Bioaerosol Samplers
The ability of The selection of suitable bioaerosol samplers is guided by the objectives of sam-
bioaerosols to cause pling as well as the types and levels of bioaerosols of interest in the environment to be
sampled. Some commonly used and commercially available bioaerosol samplers are
adverse health listed in Table 4.
effects or to initiate
Inertial Impactors
disease depends
Andersen viable impactors are probably the most common inertial impactors used
upon their ability to for bioaerosol sampling in animal houses. This type of sampler consists of (1) a top
survive and remain inlet “cone,” (2) the sampling impactor stage(s), utilizing hundreds of precision-drilled
holes to selectively allow for deposition of bioaerosols within a certain size range, and
infectious in the (3) a base section that holds the agar media (petri dish) on which the particles collected
from air are deposited, as shown in Figure 4.
environment, as well
The sampler is held together by three spring clamps and sealed with two O-ring
as their exposure to gaskets. When air is drawn through the sampler, multiple jets of air direct size-selec-
tive airborne particles toward the surface of the agar collection surface (petri dish).
a susceptible host. Andersen samplers are available as a single-stage collection system or with multiple
stages. For multiple stage samplers, larger holes, and, therefore, larger particles, are
deposited in the upper stages with subsequently smaller and smaller holes, and, there-
fore, smaller particles, deposited in the lower stages. Each stage has precisely etched
holes that will allow for deposition of bioaerosols within a relatively narrow size range.
Impingers
A second type of sample collection device, the impinger, is commonly used for
collecting bioaerosols in a liquid or nutrient broth. An impinger operates as an impactor,
with the exception that its jet is immersed in liquid collection media. Large particles
are captured by an inertial mechanism and suspended in the liquid contained within
the impinger. Collecting the bioaerosol samples in liquid may prevent sample desicca-
tion; however, the shear forces in the jet and in the turbulent liquid may have adverse
impacts on the viability of sampled bioaerosols. In general, impingers provide less
damage to bioaerosols and preserve viability better than impactors.
All glass impingers, including AGI-30 and AGI-4, are the most commonly used im-
pingers for collection of bioaerosols. The cutoff diameter of an AGI-30 impinger is 0.3
µm, above which all particles are collected during sampling. In addition, size fraction-
ating impingers (multistage impingers) have also been used for bioaerosol sampling.
As shown in Figure 5, the multistage liquid impinger (MSLI) collects bioaerosols and
separates them into three size fractions by utilizing three different sampling flow rates.
Anderson single-stage Anderson two-stage Anderson six-stage Stage with petri dish
viable impactor viable impactor viable impactor
Figure 4. Examples of inertial impactor—Anderson viable samplers
10 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
11. All glass AGI-30 liquid Multistage all glass liquid
Figure 5. Examples of impingers3
Aerojet® cyclone sampler RSC Biotest® centrifugal sampler
Figure 6. Examples of centrifugal samplers3
The Centrifugal Sampler
The Reuter centrifugal air sampler or the Biotest RCS® biocollector are two com-
monly used types of centrifugal samplers3. Figure 6 illustrates two examples of this
type of sampler. Each of these samplers uses centrifugal force to “spin” bioaerosols
in the sampled air along a cone, with air pressure decreasing as the air parcel moves
lower in the sampler, such that particles are deposited in the lower chamber of the
sampler.
Filter Samplers
Simple filtration methods using membrane filters have also been used for bio-
aerosol sampling. Basically, an air parcel is pulled through the membrane filter, and
bioaerosols larger than the pore diameter of the filter are collected on the filter surface.
Bioaerosol particles collected onto filters can be directly examined using an optical
microscope. Bioaerosol particles also may be cultured before examination by placing
the filter on a culture medium to enumerate viable organisms.
The filtration method is easy to use. However, the filtration process may cause
significant desiccation of collected bioaerosols, which may lead to a significant loss in
viability. This method has been used to sample robust or microscopically identifiable
bioaerosols in highly contaminated environments1,2,3. Filtration also can be used for
sampling endotoxins, (1-3)-bata-D-glucan, and dusts for DNA extraction where viability
may not be an issue.
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 11
12. Biological Analysis
Many different assay methods to detect and quantify microbes in the collected
bioaerosol samples are described in the literature. Traditional methods for microbiologi-
cal analyses include microscopic counting and culture-based analyses. Some of the
more advanced methods currently available include biochemical and molecular biologi-
cal assays.
Selection of a method for analysis should be based upon objectives of the study
and availability of methods. If a study is evaluating the concentration of viable bioaero-
sols for public health in general, analysis should be performed without emphasis on
specific identification of a particular microorganism. In this case, a traditional cultivation
method with no further differentiation of microbes is sufficient. However, a wide range
of studies requires identification of species that may be present in a sampling environ-
ment as well as determination of viability or infectivity of sampled bioaerosols. In these
circumstances, more advanced analytical methods may be required for the study.
Microscopy
Bioaerosol particles, collected on a glass slide, tape, or appropriate filter, can be
enumerated using microscopic methods. Large particles (e.g., pollen grains) are readily
enumerated using a light microscope. However, smaller aerosols (e.g., bacteria cells)
may be masked by other particles, and some of the smaller bacteria cells may not
A variety of be visible using an optical microscope. In certain cases, collected bioaerosols can be
stained to better distinguish them from background materials and then be enumerated
targets, methods using conventional light microscopic techniques. One of the limitations of microscopic
methods is that they do not distinguish culturable or viable bioaerosols1.
for sampling, and Some of the commonly used microscopic techniques include3:
methods of analyses Microscopy
are available for • mono-objective bright field light microscopy,
• dark field illuminated microscopy,
detection and • phase contrast microscopy,
• polarizing microscopy,
quantification • Differential-interference Contrast microscopy (DIC),
• fluorescence light microscopy (using antibodies specific to target organisms to
of bioaerosols differentiate them from background materials),
• confocal laser-scanning microscopy,
in animal • scanning electron microscopy, and
• transmission electron microscopy.
environments.
Image capture and analyses, which utilize image analysis software to capture images
of microscopic fields for subsequent particle analyses and counting.
Culture-based Assays1
(adapted from reference 1)
Culture-based, or cultivation, methods are used to detect viable organisms and
allow for bacteria or fungi to be collected directly onto agar plates or transferred onto
agar plates from a liquid or a particle-laden filter sample. Following collection, sampled
bioaerosols are cultured under controlled laboratory conditions optimal for growth,
and colonies are enumerated after a prescribed incubation period. The results of this
method are usually given in colony-forming units per cubic meter of sampled air (cfu/
m3).
For general bioaerosol sampling, a nonselective agar medium is often used to
detect the varied organisms that may be present in air sampled. Nonselective culture
media provides the basic nutrients for growth of the most common microorganisms.
However, in some cases all viable microorganisms will not be cultured on the same
medium due to significant differences in growing needs for the different organisms in
samples.
12 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
13. A wide range of nonselective as well as selective media are commercially avail-
able. Selective media are available for specific types of microorganisms. By changing
the composition of the medium, or using specific nutrients, selected microorganisms
can be cultivated or excluded. Bioaerosol samples for culturable microbes are incubat-
ed in an incubator at specific temperatures, depending upon the types of microorgan-
isms that are to be detected. In some instances, temperature alone can be selective
for a specific group of microorganisms.
Identification of fungal colonies is based on the morphology of the colonies,
spores, and hyphae, whereas identification of bacteria colonies is based on the mor-
phology and staining properties of the cells, with further confirmation using physiologi-
cal and biochemical tests. A number of easy-to-use, commercially available kits are
useful for identifying bacteria in collected bioaerosol samples.
General classification of colony types or genus identification may provide enough
information to draw conclusions for sampling results to meet certain general project
objectives. However, environmental bacteria generally differ from the clinically signifi-
cant species. Therefore, identification of environmental microorganisms requires spe-
cial experience and expertise. An in-depth discussion about the principles of identifica-
tion and classification of microorganisms isolated from the environment are presented
in several bacteriological handbooks3-5.
Although the culture-based methods have commonly been used to quantify the
concentrations of airborne bacteria from environmental bioaerosol samples, these
methods miss 99 percent of the total microbial diversity since only 1 percent of air-
borne bacteria are culturable6.
Biochemical Analysis
Morphological evaluation and viability assay methods for organisms in or on vari-
ous media are classical techniques for detection and identification of bioaerosols in en-
vironmental air samples. However, no single test can provide a definitive identification
of environmental isolates, and these classical methods tend to be relatively expensive
and time consuming.
Biochemical analytic methods for detecting and identifying microorganisms
measure certain biological molecules (biochemical components of unique chemical
structure) in bioaerosol particles to distinguish biological from nonbiological materials.
These methods are capable of providing information about the organisms collected to
the genus and often to the species levels.
Biochemical methods use the following high-end techniques for rapid measure-
ment of specific chemical properties of the microorganisms collected3:
• gas-liquid chromatography,
• mass spectrometry,
• laser spectroscopy,
• fluorescence and luminescence spectroscopy,
• infrared and Raman spectroscopy,
• flow cytometry, and
• electrochemical techniques.
Molecular-Biological Assays
Molecular assays can be used to detect and enumerate specific organisms, such
as pathogenic organisms, or to look more generally at a collected sample to identify
all of the bacteria within the population collected. A commonly used molecular assay
procedure for bioaerosol analysis is polymerase chain reaction (PCR) with subsequent
genetic hybridization potentially followed by genetic sequencing. PCR can be used
to detect known and specific nucleic acid sequences isolated from bioaerosols for
specific organisms.
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 13
14. In this method, areas of the genetic material (i.e., DNA or RNA) in specific microor-
ganisms are replicated, and then detected. If the genetic sequence is not detected
from the amplified sample, the specific organism was not present in the original sam-
ple. This method is useful for the rapid detection of microorganisms that are difficult or
impossible to culture, especially pathogenic microorganisms. DNA-sequencing can be
used to better understand specific genetic sequences within an unknown population.
When compared to a known sequence database, it can be used to identify the organ-
isms present in the original sample.
A second type of molecular detection for identifying unknown organisms in a
sample is ribotyping. In this method, the total genetic material of a population collected
is extracted, and a series of restriction enzymes are used to cut the DNA or RNA at
specific sequences. The samples are then analyzed using computer software to com-
pare with the genetic banding patterns of known groups. In this way, all of the bacteria
within the population of the collected sample can be identified. A limitation of this
method is that it cannot be used to predict the relative concentrations of each group
identified from the original population.
Molecular methods are extremely useful for environmental detection of micro-
organisms collected from the environment. They are generally cheaper, considerably
faster, and can be more specific than conventional culture methods. However, they are
plagued by other materials co-concentrated in the samples that can inhibit detection
and provide no information about the viability or infectivity of microorganisms collect-
ed. Implementing molecular detection for environmental isolates requires a relatively
high level of training and expertise to provide accurate and meaningful results.
Summary
Bioaerosols are particles of biological origin that are suspended in environmental
air. Bioaerosols can be made up of many different types of particles, including bacteria,
viruses, parasites, fungi, and other particles, such as pollen, that may lead to adverse
health effects in an exposed population. When designing a study to detect and quan-
titate particles that make up bioaerosols in outdoor environments, it is important to
understand the sampling methods that are currently available, along with their limita-
tions, so that the best techniques can be utilized to collect information that will best
meet project objectives.
For any bioaerosol sampling plan used for outdoor environmental samples, one
must consider:
• Which bioaerosol or group will be targeted?
• What sampler will be used?
• What is a suitable sample time that will optimize the concentration of particles
collected?
• What methods will be used to detect and quantify collected bioaerosols?
A range of different samplers can be used for collecting bioaerosols from envi-
ronmental air. These include simple filters, impactors, impingers, and other advanced
types of samplers, such as centrifugal samplers. Considerations for choosing a suitable
sampler include whether viability of collected organisms will be measured, and if the
goal is to collect total particles, or to separate bioaerosols based on size fractions.
Once a suitable sampler is chosen that will meet project objectives, it is ex-
tremely important to choose a suitable sample time and plan. For most of the filter and
impactor type samplers, it is possible to under- or overload the samplers. Bioaerosol
concentrations are generally high in animal environments so this information should be
considered when choosing an appropriate sampler and sampling time. An advantage
for impingers is that this under/overloading factor can be overcome following sample
collection.
In addition to sample time, it is important to design a suitable sample plan that will
account for the variability in sampled environments over time. Because bioaerosols are
generally not released on a consistent basis, the sample site, duration, and timing will
14 AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE Measuring: Bioaerosols
15. be important. For example, animals may be more active during certain times of the day
and during certain seasons. Bioaerosol release will generally be higher during these
times, and the sampling plan should be adjusted accordingly. Reviewers
Finally, once samples are collected, it is important to choose a suitable analytical
technique that will provide suitable information to meet project objectives. Methods Xinlei Wang, University of
are available to detect viable microbial contaminants and to quickly detect certain tar- Illinois, Urbana-Champaign
geted organisms, such as particular pathogens, or molecular methods for determining Xufei Yang, Post Doctoral Scholar
the total population contained within a sample.
University of Illinois,
Molecular detection methods are useful for detecting specific targets as well as Urbana-Champaign
for determining the total population. However, they do not provide information regard-
ing the concentrations of viable microbial contaminants in a sample. Viability and in-
fectivity are important factors to consider from a public health standpoint because this
portion of the total population sampled is capable of leading to adverse health effects
following exposure to a susceptible population.
A variety of targets, methods for sampling, and methods of analyses are available
for detection and quantification of bioaerosols in animal environments. When design-
ing a suitable sampling plan, each of the available techniques should be considered to
optimize the information that is collected.
References
1. Baron, P. A., and K. Willeke. 2001. Aerosol Measurement: Principles, Techniques, and
Applications, 2nd ed. New York: John Wiley & Sons.
2. Hinds, W. C. 1999. Aerosol Technology: Properties, Behavior, and Measurement of
Airborne Particles, 2nd ed. New York: John Wiley & Sons.
3. Cox, C. S., and C. M. Wathes. 1995. Bioaerosols Handbook. Washington, D.C.: Lewis
Publishers.
4. Holt, J. G. 1984. Bergey’s Manual of Systematic Bacteriology, vols 1-4. Baltimore: Williams
& Wilkins.
5. Truper, H. G., and J. Kramer. 1981. Principles of Characterization of Prokaryotes. In The
Prokaryotes, M. P. Starr, H. Stopl, H. G. Truper, A. Balows, and H. Schlegel, eds. Berlin:
Springer-Verlag.
6. Nehme, B., V. Letourneau, R. J. Forster, M. Veillette, and C. Duchaine. 2008.
Culture-independent approach of the bacterial bioaerosol diversity in the standard swine
confinement buildings, and assessment of the seasonal effect. Environ.
Microbiology 10(3), 665-675.
The Air Quality Education in Animal Agriculture project was supported by
National Research Initiative Competitive Grant 2007-55112-17856 from the USDA National
Institute of Food and Agriculture.
Educational programs of the eXtension Foundation serve all people regardless of race, color, age,
sex, religion, disability, national origin, or sexual orientation. For more information see the
eXtension Terms of Use at eXtension.org.
Air Quality Education
Reference to commercial products or trade names is made with the understanding that no
in Animal Agriculture
discrimination is intended and no endorsement by eXtension is implied.
Measuring: Bioaerosols AIR QUALITY EDUCATION IN ANIMAL AGRICULTURE 15