Aero dataworkshop 2d-module-03_v1.0_en (2)
•Download as PPT, PDF•
0 likes•289 views
The document discusses requirements for aeronautical data quality and management according to ICAO standards. It covers collecting terrain and obstacle data according to different areas, with varying levels of detail required closer to runways and within traffic maneuvering areas. Metadata and data quality statistics are important to allow users to evaluate data quality and trace changes over time. The presentation provides examples of metadata and quality metrics that could be recorded and monitored.
Report
Share
Report
Share
![[object Object],[object Object],[object Object]](https://image.slidesharecdn.com/aerodataworkshop-2dmodule-03v1-0en2-111128013135-phpapp02/85/Aero-dataworkshop-2d-module-03_v1-0_en-2-1-320.jpg)
![[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Air traffic management
This document outlines the syllabus for an Air Traffic Management course. It will cover several topics related to continental and oceanic air traffic control, including case studies on various air traffic control centers. It will also discuss network operations in Europe, airspace management systems, airport collaborative decision making, air traffic control systems and components. Additional topics include air-ground datalink technologies, the Single European Sky initiative, the SESAR program and case studies, as well as an overview of the FAA's NextGen program. The course will include a practical assignment involving JavaScript programming and visualization of flight trajectories.
Ijmet 06 08_015
SCS &GIS ENABLED PROJECT MANAGEMENT SYSTEM FOR DEVELOPMENT AND IMPLEMENTATION PHASE OF GAS DISTRIBUTION PROJECT
Elevation, pitch and travel axis stabilization of 3DOF helicopter with hybrid...
This research work introduces an efficient hybrid control methodology through combining the traditional proportional-integral-derivative (PID) controller and linear quadratic regulator (LQR) optimal controlher. The proposed hybrid control approach is adopted to design three degree of freedom (3DOF) stabilizing system for helicopter. The gain parameters of the classic PID controller are determined using the elements of the LQR feedback gain matrix. The dynamic behaviour of the LQR based PID controller, is modeled in state space form to enable utlizing state feedback controller technique. The performance of the proposed LQR based LQR controller is improved by using Genetic Algorithm optimization method which are adopted to obtain optimum values for LQR controller gain parameters. The LQR-PID hybrid controller is simulated using Matlab environment and its performance is evaluated based on rise time, settling time, overshoot and steady state error parameters to validate the proposed 3DOF helicopter balancing system. Based on GA tuning approach, the simulation results suggest that the hybrid LQR-PID controller can be effectively employed to stabilize the 3DOF helicopter system.
2. avionics architecture da cp
The document summarizes the evolution of avionics architectures from independent analog systems to integrated modular digital systems. It describes four generations: (1) Independent analog systems from the 1940s-50s with no communication between systems; (2) Federated digital architectures from the 1960s-70s with loosely coupled systems connected via data buses; (3) Integrated modular architectures from the 1980s-90s with increased digitalization and function sharing; and (4) Advanced integrated architectures post-2000 with common modules, processors and an open systems approach. The modern trend is toward greater integration, modularity, networking and software-defined functionality.
Robust second order sliding mode control for a quadrotor considering motor dy...
In this paper, a robust second order sliding mode control (SMC) for controlling a quadrotor with uncertain
parameters presented based on high order sliding mode control (HOSMC). A controller based on the
HOSMC technique is designed for trajectory tracking of a quadrotor helicopter with considering motor
dynamics. The main subsystems of quadrotor (i.e. position and attitude) stabilized using HOSMC method.
The performance and effectiveness of the proposed controller are tested in a simulation study taking into
account external disturbances with consider to motor dynamics. Simulation results show that the proposed
controller eliminates the disturbance effect on the position and attitude subsystems efficiency that can be
used in real time applications.
Dpa fits 2015_eng
DPA FITS – Future Intelligent Transport Systems: advanced systems, which aim to provide innovative services relating to different modes of transport and traffic management, centralized city traffic monitoring and speed camera control and others.
eMOTION! REPORTS.com Archives: (Boeing) Air Traffic Management: Revolutionary...
eMOTION! REPORTS.com Archives: (Boeing) Air Traffic Management: Revolutionary...GLOBAL HEAVYLIFT HOLDINGS
The document proposes a new air traffic management concept that would enable continued air traffic growth while reducing delays. The concept relies on three key features: aircraft trajectories to provide a look-ahead capability for traffic flow management, a common information network to share real-time flight and system data, and a restructured airspace designed for new operational capabilities. The implementation would occur in three phases, gradually introducing new trajectory-based procedures and taking advantage of improved communications, navigation and surveillance technologies to simplify air traffic control.RCS_02_2015_en_print
1. The document discusses RCS, a Ukrainian company that provides satellite monitoring systems for agricultural holdings.
2. It introduces RCS's fleet management software called TeleTrack, which uses GPS/GLONASS to track vehicle location and sensor data in real-time.
3. The software includes modules for tracking vehicles, managing routes, and generating detailed reports on vehicle operations and field work.
Recommended
Air traffic management
This document outlines the syllabus for an Air Traffic Management course. It will cover several topics related to continental and oceanic air traffic control, including case studies on various air traffic control centers. It will also discuss network operations in Europe, airspace management systems, airport collaborative decision making, air traffic control systems and components. Additional topics include air-ground datalink technologies, the Single European Sky initiative, the SESAR program and case studies, as well as an overview of the FAA's NextGen program. The course will include a practical assignment involving JavaScript programming and visualization of flight trajectories.
Ijmet 06 08_015
SCS &GIS ENABLED PROJECT MANAGEMENT SYSTEM FOR DEVELOPMENT AND IMPLEMENTATION PHASE OF GAS DISTRIBUTION PROJECT
Elevation, pitch and travel axis stabilization of 3DOF helicopter with hybrid...
This research work introduces an efficient hybrid control methodology through combining the traditional proportional-integral-derivative (PID) controller and linear quadratic regulator (LQR) optimal controlher. The proposed hybrid control approach is adopted to design three degree of freedom (3DOF) stabilizing system for helicopter. The gain parameters of the classic PID controller are determined using the elements of the LQR feedback gain matrix. The dynamic behaviour of the LQR based PID controller, is modeled in state space form to enable utlizing state feedback controller technique. The performance of the proposed LQR based LQR controller is improved by using Genetic Algorithm optimization method which are adopted to obtain optimum values for LQR controller gain parameters. The LQR-PID hybrid controller is simulated using Matlab environment and its performance is evaluated based on rise time, settling time, overshoot and steady state error parameters to validate the proposed 3DOF helicopter balancing system. Based on GA tuning approach, the simulation results suggest that the hybrid LQR-PID controller can be effectively employed to stabilize the 3DOF helicopter system.
2. avionics architecture da cp
The document summarizes the evolution of avionics architectures from independent analog systems to integrated modular digital systems. It describes four generations: (1) Independent analog systems from the 1940s-50s with no communication between systems; (2) Federated digital architectures from the 1960s-70s with loosely coupled systems connected via data buses; (3) Integrated modular architectures from the 1980s-90s with increased digitalization and function sharing; and (4) Advanced integrated architectures post-2000 with common modules, processors and an open systems approach. The modern trend is toward greater integration, modularity, networking and software-defined functionality.
Robust second order sliding mode control for a quadrotor considering motor dy...
In this paper, a robust second order sliding mode control (SMC) for controlling a quadrotor with uncertain
parameters presented based on high order sliding mode control (HOSMC). A controller based on the
HOSMC technique is designed for trajectory tracking of a quadrotor helicopter with considering motor
dynamics. The main subsystems of quadrotor (i.e. position and attitude) stabilized using HOSMC method.
The performance and effectiveness of the proposed controller are tested in a simulation study taking into
account external disturbances with consider to motor dynamics. Simulation results show that the proposed
controller eliminates the disturbance effect on the position and attitude subsystems efficiency that can be
used in real time applications.
Dpa fits 2015_eng
DPA FITS – Future Intelligent Transport Systems: advanced systems, which aim to provide innovative services relating to different modes of transport and traffic management, centralized city traffic monitoring and speed camera control and others.
eMOTION! REPORTS.com Archives: (Boeing) Air Traffic Management: Revolutionary...
eMOTION! REPORTS.com Archives: (Boeing) Air Traffic Management: Revolutionary...GLOBAL HEAVYLIFT HOLDINGS
The document proposes a new air traffic management concept that would enable continued air traffic growth while reducing delays. The concept relies on three key features: aircraft trajectories to provide a look-ahead capability for traffic flow management, a common information network to share real-time flight and system data, and a restructured airspace designed for new operational capabilities. The implementation would occur in three phases, gradually introducing new trajectory-based procedures and taking advantage of improved communications, navigation and surveillance technologies to simplify air traffic control.RCS_02_2015_en_print
1. The document discusses RCS, a Ukrainian company that provides satellite monitoring systems for agricultural holdings.
2. It introduces RCS's fleet management software called TeleTrack, which uses GPS/GLONASS to track vehicle location and sensor data in real-time.
3. The software includes modules for tracking vehicles, managing routes, and generating detailed reports on vehicle operations and field work.
A four way autometic traffic control system with variable delay using hdl
Abstract Traffic congestion is a severe problem in this new era of growing vehicle population in all the developing countries. This is a bold signal to the modern age technology for a major improvement and innovation in the existing traffic control system. The most widely used traffic control system uses a simple time-based system and it works on a time interval basis. It is an automatic system but for modern age random and non-uniform traffic, it is inefficient. The advance automatic systems use the image processing technology or advance communication system to communicate and route. It might be used in the developing countries but it is very much complex and expensive too. The practical implementation of this advance traffic control system is also arduous in countries like India. In this paper, a low cost, real-time, system-on-chip (SoC), application specific automatic traffic control system has been proposed and implemented for four way traffic and the delay between two states can be changed manually, depending upon the density of the traffic. It is being implemented using Hardware Description Language (HDL) on a Field Programmable Gate Array (FPGA) chip without using any other hardware resources or high level languages. The physical attribute of an FPGA chip, being compact in size and low in power consumption, makes it an ideal platform for the implementation. The complete architecture of the proposed traffic control system has been designed using Finite State Machine (FSM) based approach and it contains three different modules. The modules are System Initialization Module (SIM), Signal Generation Module (SGM) and Delay Control Module (DCM). The architecture is completely synthesized for Spartan 3E xc3s500e-4-fg320 FPGA with only 1% of the total logic utilization. Result obtains from a practical set-up of a four-way traffic system, where the signals are controlled by the proposed controller and the toy cars and the density of the traffic has been controlled manually. Key Words: Traffic controller, Four-way traffic system, FPGA, HDL, and FSM.
Traffic volume study
Transportation Engineering
presentation Topic: 1.Roadway Condition Survey
2. Traffic Volume Study
A wireless sensors network in Aircraft Control Systems
Wireless sensor networks (WSNs) can enable several applications in aircraft control systems by reducing weight, costs, and complexity. WSNs may allow for distributed aircraft engine control, structural health monitoring, environmental control systems, and emergency systems. Key benefits of WSNs include increased fuel efficiency, decreased aircraft weight, flexibility, and reduced maintenance costs. However, further research is still needed to address challenges such as communication delays, packet loss, bandwidth constraints, high-temperature electronics, and optimal data fusion and routing protocols.
Control systems project report (180501008)(180501016)(180501018)(180501020)
A cruise control system for an electric vehicle has been modeled in MATLAB Simulink. A PI controller controls torque and a PID controller controls speed. The effect of the controllers and different inputs were analyzed. With both controllers, the system became stable, while it was unstable with no controllers. Step, ramp, and sine wave inputs all stabilized. Key parameters like peak time, rise time, and settling time were calculated from the output.
Gain scheduling automatic landing system by modeling Ground Effect
Gain scheduling automatic landing system by modeling Ground EffectInternational Journal of Engineering Inventions www.ijeijournal.com
Taking ground effect into account a longitudinal automatic landing system is designed. Such a system will be tested and implemented on board by using the Preceptor N3 Ultrapup aircraft which is used as technological demonstrator of new control navigation and guidance algorithms in the context of the “Research Project of National Interest” (PRIN 2008) by the Universities of Bologna, Palermo, Ferrara and the Second University of Naples. A general mathematical model of the studied aircraft has been built to obtain non–linear analytical equations for aerodynamic coefficients both Out of Ground Effect and In Ground Effect. To cope with the strong variations of aerodynamic coefficients In Ground Effect a modified gain scheduling approach has been employed for the synthesis of the controller by using six State Space Models. Stability and control matrices have been evaluated by linearization of the obtained aerodynamic coefficients. To achieve a simple structure of the control system, an original landing geometry has been chosen, therefore it has been imposed to control the same state variables during both the glide path and the flare.Application of wireless sensor networks to aircraft control and health manage...
Wireless sensor networks have the potential to replace wired systems on aircraft and enable fly-by-wireless control. They could reduce aircraft weight and wiring complexity while increasing the number of sensors. Specifically, using WSN for aircraft engine control systems could lower weight by 90 lbs on small aircraft and increase range by 10%. WSN also enable structural health monitoring and condition-based maintenance to improve safety and reduce costs. However, further research is still needed in areas like information fusion, energy harvesting, high-temperature electronics, spectrum allocation, and security/safety regulations before widespread implementation.
APPLICATION OF WIRELESS SENSOR NETWORKS TO AIRCRAFT CONTROL AND HEALTH MANAGE...
APPLICATION OF WIRELESS SENSOR NETWORKS TO AIRCRAFT CONTROL AND HEALTH MANAGE...University of Gujrat, Pakistan
Wireless sensor networks have the potential to replace wired systems on aircraft and enable fly-by-wireless control. They could reduce aircraft weight and wiring complexity while increasing the number of sensors. Specifically, using WSN for aircraft engine control systems could lower weight by 90 lbs on small aircraft and increase range by 10%. WSN also enable improved structural health monitoring, engine health management through condition-based maintenance, and integration of multiple aircraft systems. However, further research is still needed in areas like information fusion, energy harvesting, high-temperature electronics, spectrum allocation, and security/safety certification for full implementation on commercial aircraft.Modernisation of Avionics and C.N.S. Facilities
Last four/five decades have seen revolutionary development in the field of electronics, computer and automation. Naturally avionics and C.N.S facilities also have adopted these technologies to the best of their advantage. The present paper shows how these technologies have modernized the aircraft cockpit and how C.N.S facilities have been modernised to give smooth and safe flying. The description is based on author’s observation of the development in civil aviation for the last more than four decades and future trends in this field
Growing Demand of Cruise Control System Over 5 Years
Cruise control is an idiosyncratic feature in the vehicle that regulates the speed of the car automatically. With this great feature, a motorist can maintain a constant speed during the ride without his interference. Because of the high rate of adoption of the cruise control, an operative can stay safe while driving during the forecast period. Its ability to offer comfortable rides and better fuel-economy makes it able to stay on demand across the global market.
Fpga implementation on advance traffic light
This document summarizes an FPGA implementation of an advanced traffic light control system. The system uses a finite state machine and Verilog code to efficiently control traffic lights across multiple intersections. It aims to maximize traffic flow during peak hours by intelligently assigning right of way. The FPGA implementation allows for low power consumption and fast, real-time control of traffic lights.
EASA REGULATORY CHANGES ON THE USAGE OF SOFTWARE & SYSTEMS
The upcoming EASA regulation changes will impact aviation IT systems that handle technical records by Q4 2019. The new regulations will include functional and data requirements. Historically, Excel spreadsheets have been used but will no longer be sufficient. Airlines will need to assess how their current systems fit or gap the new requirements and determine plans to achieve compliance. Cross-industry solutions will be needed to standardize the handling of component lifetime values and aircraft data transfers between systems. Airlines have approximately two years to prepare for these changes.
EASA PART-66 MODULE 5.15 : TYPICAL AIRCRAFT INSTRUMENT SYSTEMS
The document provides information on typical aircraft instrument systems, including:
1. The electronic flight instrument system (EFIS) which replaces traditional mechanical instruments with electronic displays like the electronic attitude director indicator (EADI) and electronic horizontal situation indicator (EHSI).
2. The electronic centralized aircraft monitoring (ECAM) system which monitors aircraft systems and provides visual warnings to pilots such as the electronic centralized aircraft monitoring (ECAM) display.
3. The fly-by-wire (FBW) system which replaces traditional manual flight controls with an electronic interface for transmitting commands to flight surfaces through actuators.
Vehicle Testing by OEM Technological Instruments
For Vehicle testing we offer all instruments and after sale support and services.
OEM Technological Instruments offers you the best technology for your R&D and Testing applications.
Please Feel Free to contact Us for any Inquiry.
Mobile : +91-9810533190
Tel: 0120-4370020
E-mail: mail@oemtesting.com oemtech@sify.com
Traffic engineering
1. The document discusses various methods for conducting traffic volume studies, including manual counts, mechanical counters, and automatic counts.
2. Manual counts involve people standing at the roadside and recording vehicle information on tally sheets or mechanical/electronic counting boards.
3. Automatic counts use sensors like pneumatic tubes, inductive loops, weigh-in-motion scales, radar detectors, and video cameras to collect traffic data without human observation.
Pkrmmp phase 2 ntb workshop draft 3 ty-session 0
This document outlines a workshop on road maintenance management planning and funding options. It discusses the need to improve road maintenance practices at the provincial and district levels in Indonesia. A two-phase project is proposed to: 1) review current maintenance practices and funding, and 2) develop a systematic planning approach for maintenance in selected provinces and districts as a pilot model. The scope of work includes drafting road maintenance policies and planning procedures, conducting network surveys and workshops, and identifying sustainable maintenance planning and funding sources. The goal is to demonstrate the benefits of improved maintenance practices and secure adequate long-term funding.
Esr 01 & esr-02 closing meeting
This document summarizes a road safety audit closing meeting for two projects in South-East Sulawesi. It discusses construction progress and additional safety works for the Tinanggea - Kasipute road, which is now complete, as well as ongoing construction and safety works for the Bambaea - Sp. Kasipute road. Various road safety elements like guardrails, signs, intersections, and driver visibility are addressed. The document concludes by thanking meeting participants.
3 vulnerable road users
The document discusses strategies to improve safety for vulnerable road users such as pedestrians, motorcyclists, and bicyclists. It notes that over 80% of road fatalities in Indonesia involve these groups. For pedestrians, it identifies the elderly, young children, disabled individuals, and intoxicated persons as being at higher risk. It recommends pedestrian strategies like segregation, separation in time and space from vehicles, and integration onto roads shared with vehicles. Similar strategies for motorcyclists and bicyclists include providing consistent road conditions, sealed shoulders, and lateral space to ride. The document encourages considering these vulnerable groups when investigating traffic black spots.
Roadside hazard management john coles
Roadside Hazard Management aims to efficiently deliver programs to improve safety, environmental and cultural values, and amenity and access. It involves identifying, prioritizing, and treating roadside hazards to maximize safety by reducing the incidence and severity of crashes. Elements of the roadside that can pose hazards include shoulders, signs, batters, and clear zones. Different approaches are needed for managing hazards on new road projects versus existing roads due to feasibility and cost considerations.
Steering committee draft policy note 3 revised (1)
This document summarizes a meeting of Indonesia's Gas Development Master Plan Steering Committee. It outlines current roles and responsibilities in Indonesia's gas supply chain and recommendations to address policy gaps. Key points include: 1) Domestic gas demand is growing but exports and domestic use are currently balanced; 2) Uncertainty around PSC extensions is constraining investment; 3) Coordination is needed across the supply chain and sectors like transportation to ensure gas availability and meet targets. The committee recommends increasing transparency around gas data and forecasts, clarifying the PSC extension process, and establishing a new body to coordinate integrated gas supply chain planning.
Gdmp model workshop 6 - next steps
The document outlines the next steps for Indonesia's Gas Development Master Plan project. It discusses updating the DASS-TIM model with revised assumptions and using it to model agreed policy scenarios. The results will be used to complete Task A analyses and inform the next set of Policy Notes under Task B. A draft technical report and policy notes will be submitted in October, with final reports in November. Further capacity building meetings will be held in August-September to present modeling results and discuss initial conclusions. The DASS-TIM model will be transferred after a final workshop.
More Related Content
What's hot
A four way autometic traffic control system with variable delay using hdl
Abstract Traffic congestion is a severe problem in this new era of growing vehicle population in all the developing countries. This is a bold signal to the modern age technology for a major improvement and innovation in the existing traffic control system. The most widely used traffic control system uses a simple time-based system and it works on a time interval basis. It is an automatic system but for modern age random and non-uniform traffic, it is inefficient. The advance automatic systems use the image processing technology or advance communication system to communicate and route. It might be used in the developing countries but it is very much complex and expensive too. The practical implementation of this advance traffic control system is also arduous in countries like India. In this paper, a low cost, real-time, system-on-chip (SoC), application specific automatic traffic control system has been proposed and implemented for four way traffic and the delay between two states can be changed manually, depending upon the density of the traffic. It is being implemented using Hardware Description Language (HDL) on a Field Programmable Gate Array (FPGA) chip without using any other hardware resources or high level languages. The physical attribute of an FPGA chip, being compact in size and low in power consumption, makes it an ideal platform for the implementation. The complete architecture of the proposed traffic control system has been designed using Finite State Machine (FSM) based approach and it contains three different modules. The modules are System Initialization Module (SIM), Signal Generation Module (SGM) and Delay Control Module (DCM). The architecture is completely synthesized for Spartan 3E xc3s500e-4-fg320 FPGA with only 1% of the total logic utilization. Result obtains from a practical set-up of a four-way traffic system, where the signals are controlled by the proposed controller and the toy cars and the density of the traffic has been controlled manually. Key Words: Traffic controller, Four-way traffic system, FPGA, HDL, and FSM.
Traffic volume study
Transportation Engineering
presentation Topic: 1.Roadway Condition Survey
2. Traffic Volume Study
A wireless sensors network in Aircraft Control Systems
Wireless sensor networks (WSNs) can enable several applications in aircraft control systems by reducing weight, costs, and complexity. WSNs may allow for distributed aircraft engine control, structural health monitoring, environmental control systems, and emergency systems. Key benefits of WSNs include increased fuel efficiency, decreased aircraft weight, flexibility, and reduced maintenance costs. However, further research is still needed to address challenges such as communication delays, packet loss, bandwidth constraints, high-temperature electronics, and optimal data fusion and routing protocols.
Control systems project report (180501008)(180501016)(180501018)(180501020)
A cruise control system for an electric vehicle has been modeled in MATLAB Simulink. A PI controller controls torque and a PID controller controls speed. The effect of the controllers and different inputs were analyzed. With both controllers, the system became stable, while it was unstable with no controllers. Step, ramp, and sine wave inputs all stabilized. Key parameters like peak time, rise time, and settling time were calculated from the output.
Gain scheduling automatic landing system by modeling Ground Effect
Gain scheduling automatic landing system by modeling Ground EffectInternational Journal of Engineering Inventions www.ijeijournal.com
Taking ground effect into account a longitudinal automatic landing system is designed. Such a system will be tested and implemented on board by using the Preceptor N3 Ultrapup aircraft which is used as technological demonstrator of new control navigation and guidance algorithms in the context of the “Research Project of National Interest” (PRIN 2008) by the Universities of Bologna, Palermo, Ferrara and the Second University of Naples. A general mathematical model of the studied aircraft has been built to obtain non–linear analytical equations for aerodynamic coefficients both Out of Ground Effect and In Ground Effect. To cope with the strong variations of aerodynamic coefficients In Ground Effect a modified gain scheduling approach has been employed for the synthesis of the controller by using six State Space Models. Stability and control matrices have been evaluated by linearization of the obtained aerodynamic coefficients. To achieve a simple structure of the control system, an original landing geometry has been chosen, therefore it has been imposed to control the same state variables during both the glide path and the flare.Application of wireless sensor networks to aircraft control and health manage...
Wireless sensor networks have the potential to replace wired systems on aircraft and enable fly-by-wireless control. They could reduce aircraft weight and wiring complexity while increasing the number of sensors. Specifically, using WSN for aircraft engine control systems could lower weight by 90 lbs on small aircraft and increase range by 10%. WSN also enable structural health monitoring and condition-based maintenance to improve safety and reduce costs. However, further research is still needed in areas like information fusion, energy harvesting, high-temperature electronics, spectrum allocation, and security/safety regulations before widespread implementation.
APPLICATION OF WIRELESS SENSOR NETWORKS TO AIRCRAFT CONTROL AND HEALTH MANAGE...
APPLICATION OF WIRELESS SENSOR NETWORKS TO AIRCRAFT CONTROL AND HEALTH MANAGE...University of Gujrat, Pakistan
Wireless sensor networks have the potential to replace wired systems on aircraft and enable fly-by-wireless control. They could reduce aircraft weight and wiring complexity while increasing the number of sensors. Specifically, using WSN for aircraft engine control systems could lower weight by 90 lbs on small aircraft and increase range by 10%. WSN also enable improved structural health monitoring, engine health management through condition-based maintenance, and integration of multiple aircraft systems. However, further research is still needed in areas like information fusion, energy harvesting, high-temperature electronics, spectrum allocation, and security/safety certification for full implementation on commercial aircraft.Modernisation of Avionics and C.N.S. Facilities
Last four/five decades have seen revolutionary development in the field of electronics, computer and automation. Naturally avionics and C.N.S facilities also have adopted these technologies to the best of their advantage. The present paper shows how these technologies have modernized the aircraft cockpit and how C.N.S facilities have been modernised to give smooth and safe flying. The description is based on author’s observation of the development in civil aviation for the last more than four decades and future trends in this field
Growing Demand of Cruise Control System Over 5 Years
Cruise control is an idiosyncratic feature in the vehicle that regulates the speed of the car automatically. With this great feature, a motorist can maintain a constant speed during the ride without his interference. Because of the high rate of adoption of the cruise control, an operative can stay safe while driving during the forecast period. Its ability to offer comfortable rides and better fuel-economy makes it able to stay on demand across the global market.
Fpga implementation on advance traffic light
This document summarizes an FPGA implementation of an advanced traffic light control system. The system uses a finite state machine and Verilog code to efficiently control traffic lights across multiple intersections. It aims to maximize traffic flow during peak hours by intelligently assigning right of way. The FPGA implementation allows for low power consumption and fast, real-time control of traffic lights.
EASA REGULATORY CHANGES ON THE USAGE OF SOFTWARE & SYSTEMS
The upcoming EASA regulation changes will impact aviation IT systems that handle technical records by Q4 2019. The new regulations will include functional and data requirements. Historically, Excel spreadsheets have been used but will no longer be sufficient. Airlines will need to assess how their current systems fit or gap the new requirements and determine plans to achieve compliance. Cross-industry solutions will be needed to standardize the handling of component lifetime values and aircraft data transfers between systems. Airlines have approximately two years to prepare for these changes.
EASA PART-66 MODULE 5.15 : TYPICAL AIRCRAFT INSTRUMENT SYSTEMS
The document provides information on typical aircraft instrument systems, including:
1. The electronic flight instrument system (EFIS) which replaces traditional mechanical instruments with electronic displays like the electronic attitude director indicator (EADI) and electronic horizontal situation indicator (EHSI).
2. The electronic centralized aircraft monitoring (ECAM) system which monitors aircraft systems and provides visual warnings to pilots such as the electronic centralized aircraft monitoring (ECAM) display.
3. The fly-by-wire (FBW) system which replaces traditional manual flight controls with an electronic interface for transmitting commands to flight surfaces through actuators.
Vehicle Testing by OEM Technological Instruments
For Vehicle testing we offer all instruments and after sale support and services.
OEM Technological Instruments offers you the best technology for your R&D and Testing applications.
Please Feel Free to contact Us for any Inquiry.
Mobile : +91-9810533190
Tel: 0120-4370020
E-mail: mail@oemtesting.com oemtech@sify.com
Traffic engineering
1. The document discusses various methods for conducting traffic volume studies, including manual counts, mechanical counters, and automatic counts.
2. Manual counts involve people standing at the roadside and recording vehicle information on tally sheets or mechanical/electronic counting boards.
3. Automatic counts use sensors like pneumatic tubes, inductive loops, weigh-in-motion scales, radar detectors, and video cameras to collect traffic data without human observation.
What's hot (14)
A four way autometic traffic control system with variable delay using hdl
A four way autometic traffic control system with variable delay using hdl
A wireless sensors network in Aircraft Control Systems
A wireless sensors network in Aircraft Control Systems
Control systems project report (180501008)(180501016)(180501018)(180501020)
Control systems project report (180501008)(180501016)(180501018)(180501020)
Gain scheduling automatic landing system by modeling Ground Effect
Gain scheduling automatic landing system by modeling Ground Effect
Application of wireless sensor networks to aircraft control and health manage...
Application of wireless sensor networks to aircraft control and health manage...
APPLICATION OF WIRELESS SENSOR NETWORKS TO AIRCRAFT CONTROL AND HEALTH MANAGE...
APPLICATION OF WIRELESS SENSOR NETWORKS TO AIRCRAFT CONTROL AND HEALTH MANAGE...
Growing Demand of Cruise Control System Over 5 Years
Growing Demand of Cruise Control System Over 5 Years
EASA REGULATORY CHANGES ON THE USAGE OF SOFTWARE & SYSTEMS
EASA REGULATORY CHANGES ON THE USAGE OF SOFTWARE & SYSTEMS
EASA PART-66 MODULE 5.15 : TYPICAL AIRCRAFT INSTRUMENT SYSTEMS
EASA PART-66 MODULE 5.15 : TYPICAL AIRCRAFT INSTRUMENT SYSTEMS
Viewers also liked
Pkrmmp phase 2 ntb workshop draft 3 ty-session 0
This document outlines a workshop on road maintenance management planning and funding options. It discusses the need to improve road maintenance practices at the provincial and district levels in Indonesia. A two-phase project is proposed to: 1) review current maintenance practices and funding, and 2) develop a systematic planning approach for maintenance in selected provinces and districts as a pilot model. The scope of work includes drafting road maintenance policies and planning procedures, conducting network surveys and workshops, and identifying sustainable maintenance planning and funding sources. The goal is to demonstrate the benefits of improved maintenance practices and secure adequate long-term funding.
Esr 01 & esr-02 closing meeting
This document summarizes a road safety audit closing meeting for two projects in South-East Sulawesi. It discusses construction progress and additional safety works for the Tinanggea - Kasipute road, which is now complete, as well as ongoing construction and safety works for the Bambaea - Sp. Kasipute road. Various road safety elements like guardrails, signs, intersections, and driver visibility are addressed. The document concludes by thanking meeting participants.
3 vulnerable road users
The document discusses strategies to improve safety for vulnerable road users such as pedestrians, motorcyclists, and bicyclists. It notes that over 80% of road fatalities in Indonesia involve these groups. For pedestrians, it identifies the elderly, young children, disabled individuals, and intoxicated persons as being at higher risk. It recommends pedestrian strategies like segregation, separation in time and space from vehicles, and integration onto roads shared with vehicles. Similar strategies for motorcyclists and bicyclists include providing consistent road conditions, sealed shoulders, and lateral space to ride. The document encourages considering these vulnerable groups when investigating traffic black spots.
Roadside hazard management john coles
Roadside Hazard Management aims to efficiently deliver programs to improve safety, environmental and cultural values, and amenity and access. It involves identifying, prioritizing, and treating roadside hazards to maximize safety by reducing the incidence and severity of crashes. Elements of the roadside that can pose hazards include shoulders, signs, batters, and clear zones. Different approaches are needed for managing hazards on new road projects versus existing roads due to feasibility and cost considerations.
Steering committee draft policy note 3 revised (1)
This document summarizes a meeting of Indonesia's Gas Development Master Plan Steering Committee. It outlines current roles and responsibilities in Indonesia's gas supply chain and recommendations to address policy gaps. Key points include: 1) Domestic gas demand is growing but exports and domestic use are currently balanced; 2) Uncertainty around PSC extensions is constraining investment; 3) Coordination is needed across the supply chain and sectors like transportation to ensure gas availability and meet targets. The committee recommends increasing transparency around gas data and forecasts, clarifying the PSC extension process, and establishing a new body to coordinate integrated gas supply chain planning.
Gdmp model workshop 6 - next steps
The document outlines the next steps for Indonesia's Gas Development Master Plan project. It discusses updating the DASS-TIM model with revised assumptions and using it to model agreed policy scenarios. The results will be used to complete Task A analyses and inform the next set of Policy Notes under Task B. A draft technical report and policy notes will be submitted in October, with final reports in November. Further capacity building meetings will be held in August-September to present modeling results and discuss initial conclusions. The DASS-TIM model will be transferred after a final workshop.
Organisational and regulatory david braithwaite (formatted)
This document summarizes a presentation on regulatory and organizational challenges facing gas development in Indonesia. Recent regulations have both positive and negative impacts on the gas supply chain. Key challenges include domestic gas pricing, PSC terms, and the lack of a coordinated gas development plan across government institutions. Examples show a lack of implementation for announced gas infrastructure projects and demand not being met. Overall, conflicting policies and a lack of single decision authority on gas development planning have contributed to current gas supply and infrastructure shortfalls.
ir suhardi - directorate general of highways
Uji Laik Fungsi Jalan merupakan evaluasi terhadap keamanan dan keselamatan jalan yang dilakukan sebelum dan sesudah pengoperasian jalan. Dokumen tersebut membahas implementasi program keselamatan jalan, strategi menciptakan jalan yang lebih berkeselamatan seperti audit keselamatan jalan, dan uji laik fungsi jalan.
2008 pmk-169
Peraturan Menteri Keuangan ini mengatur tentang tata cara penyaluran hibah kepada pemerintah daerah. Dokumen utama yang diatur adalah rencana komprehensif, rencana tahunan, rencana alokasi hibah, dan daftar isian pelaksanaan anggaran hibah. Kepala daerah bertanggung jawab atas penetapan dan perhitungan biaya serta penggunaan dana hibah.
Road infrastructure safety in victoria greg chambers
VicRoads takes an integrated approach to road safety by including safety considerations in all aspects of road infrastructure management from project planning and construction to maintenance and operations, and has specific programs focused on improving high-risk roads and intersections as well as developing innovative safety solutions. Road safety audits are conducted at various stages of projects from design through completion to identify and address potential safety issues, while maintenance follows defined processes and response timelines for inspecting and addressing hazards and defects on the road network.
2008 pmk-168
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
1 intro to road safety engineering
The document is an introduction to a road safety engineering workshop in Surabaya, Indonesia. It discusses that road crashes are a global problem, killing over 1.3 million people annually. In Indonesia specifically, about 34,000 people die each year in road crashes. The summary outlines that road safety engineering aims to modify the physical road environment to reduce crash risk for all users through proven techniques. Engineers can improve safety by making low-cost improvements at crash hotspots, providing correct warnings and traffic control, and creating forgiving roadsides.
Presentation by ind ii socialization saiig to apeksi
The document describes Indonesia's INDII WATSAN Grant Program from 2012-2015. It provides details on four funding programs totaling $190 million to improve water and sanitation infrastructure. The largest program is a $90 million Water Hibah program, of which $45 million remains unallocated. A $40 million Sanitation Grants (sAIIG) program also has $32 million still available. The document outlines eligibility requirements and components for the sAIIG sanitation grants. It emphasizes the goal of working with various levels of government and other stakeholders to establish sustainable water and sanitation systems and governance.
Fiscal rita jolly (formatted)
The document discusses regional comparisons of fiscal terms for petroleum production sharing contracts (PSCs) in Asia Pacific countries. It provides an overview of key fiscal elements such as royalty rates, cost recovery limits, profit oil splits between governments and contractors, state participation requirements, and domestic market obligations. Tables compare these fiscal terms across countries and note differences in elements like tax rates, incentives provided, and average estimated government take for each country.
Workshop2 sectorisation v1
This document outlines the agenda and objectives for a technical workshop to develop the scope of work for implementing recommendations from an ATM Master Plan regarding airspace management. The workshop will review the current status of air routes, sectorisation, capacity and related issues in order to inform a new project to review and modify air routes, revise airspace management, and develop an overall Concept of Operations. Presentations will cover the status, plans, and issues regarding airspace management, and discuss the work required to develop the Concept of Operations and reorganize airspace to accommodate forecast traffic growth and new technologies.
Railway safety regulatory function ind ii
The document provides background on railway safety regulatory functions in Indonesia. It discusses how Indonesia's railways are deteriorating and in need of reinvestment and greater regulation to ensure safe and efficient operations. It proposes establishing the role and functions of a Rail Safety Regulator within the Directorate of Railway Safety to develop an effective Railway Safety Regime through ensuring safe rail operations. The Rail Safety Regulator would focus on developing guidance on a Railway Safety Management System and overseeing its implementation.
Viewers also liked (18)
Steering committee draft policy note 3 revised (1)
Steering committee draft policy note 3 revised (1)
Organisational and regulatory david braithwaite (formatted)
Organisational and regulatory david braithwaite (formatted)
Road infrastructure safety in victoria greg chambers
Road infrastructure safety in victoria greg chambers
Presentation by ind ii socialization saiig to apeksi
Presentation by ind ii socialization saiig to apeksi
Similar to Aero dataworkshop 2d-module-03_v1.0_en (2)
Aero dataworkshop 2d-module-02_v1.0_en
- eTOD (electronic terrain and obstacle data) involves collecting digital terrain and obstacle data according to standards to improve aviation safety.
- It is driven by continued risks like CFIT (controlled flight into terrain) and industry demands for standardized data to power new applications.
- eTOD data must meet quality requirements and include metadata. It is captured for various areas around airports and used by systems like flight procedures and terrain awareness.
Air Traffic Control and Runway Separations
This document discusses air traffic control and runway separations at airports. It explains that air traffic control provides operating rules for airports and influences airport capacity. Different types of air traffic control equipment are located at airports, including navigation, communication, surveillance and weather equipment. The document discusses siting criteria and critical areas for some of these equipment. It also provides examples of minimum separations between aircraft on runways and approaches under instrument and visual meteorological conditions.
AIP Operations Basic Training 020904
The document discusses the Aeronautical Information Publication (AIP), which provides essential aeronautical information to pilots and air navigation. It describes the AIP's content and structure, including general information (GEN), en-route information (ENR), and aerodrome information (AD). The AIP is published by contracting states and contains permanent information as well as information on procedures and regulations. Aerodrome operators are responsible for providing accurate data to the AIP.
WRC 15 outcomes (ITU)
The World Radiocommunication Conference of 2015 (WRC-15):
- Addressed over 40 agenda items related to frequency allocations and sharing.
- Increased total spectrum identified for mobile broadband (IMT) by 60% and globally harmonized spectrum by 39%.
- Provided additional spectrum allocations and identifications to support growing needs in mobile broadband, aeronautical services, amateur radio, maritime communications, and automotive applications.
- Imposed conditions on new allocations to ensure protection of incumbent services and promote efficient use of spectrum.
Generating and Using Meteorological Data in AERMOD
AERMOD, the preferred model of the U.S. EPA for near-field air dispersion modeling, requires the use of two meteorological files: the surface (.SFC) and profile (.PFL) files.
FLIGHT INSPECTION of CNS FACILITIES [Compatibility Mode].pdf
The document discusses flight inspection procedures for navigation aids. It describes the periodic ground and flight tests required by ICAO for radio navigation aids to ensure they are maintained within tolerance limits. The key types of inspections are commissioning, routine, special and site evaluation inspections. Flight inspection procedures are then outlined for localizers and glide paths, checking parameters like coverage, course width, clearance, structure and monitor alarms to ensure compliance with ICAO standards.
ACNS UNIT-5.pdf
- The document discusses air traffic control systems and collision avoidance systems. It provides details on primary radar systems, secondary surveillance radar, ATC transponder modes, airborne equipment, automatic dependent surveillance-broadcast, and airborne collision avoidance systems like TCAS. It describes how these systems work to monitor air traffic and help prevent collisions.
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
This document provides guidance on network design and site selection for hydro-meteorological stations. It discusses key steps in network design including identifying data needs, setting objectives, determining required network density, and reviewing existing networks. It also outlines factors to consider when selecting sites for rainfall stations and full climatic stations, including technical, environmental, logistical, security, legal, and financial aspects. Environmental factors that could impact rainfall measurements like wind exposure, vegetation, slopes, and future development are specifically addressed. The document aims to help optimize networks and select sites that provide representative and reliable hydro-meteorological data over the long term.
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
This document provides guidance on network design and site selection for hydro-meteorological stations. It discusses the steps for network optimization which include reviewing existing networks, identifying data needs, prioritizing objectives, determining required network density, and cost estimation. Site selection considerations are also outlined, including technical, environmental, logistical, security, legal and financial aspects. Key factors for siting stations include exposure conditions, wind protection, level ground, and integrating with other monitoring networks.
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
This document describes procedures for network design and site selection for hydro-meteorological monitoring stations. It outlines 8 steps for network design optimization, including reviewing existing networks and data needs, setting objectives, prioritizing objectives, determining required network density using effectiveness measures, reviewing existing networks, selecting new sites and equipment if needed, estimating costs, and implementing and reviewing the network design. It also provides details on using relative root mean square error to determine required gauge density based on design area, coefficient of variation, and number of stations. Site selection considerations include technical, environmental, logistical, security, legal, financial, and practical aspects.
Download-manuals-ground water-manual-gw-volume3fieldmanualhydro-meteorologyp...
This document provides guidance on network design and site selection for hydro-meteorological stations. It discusses factors to consider in network optimization such as data needs, objectives, and effectiveness measures. Key steps in the design process are outlined, including determining required network density based on spatial correlation of rainfall/evaporation. Site selection considerations include technical, environmental, logistical, security, legal and financial aspects. Technical factors focus on measurement accuracy and network integration. Environmental factors center around exposure conditions, wind protection, and avoiding slopes or flooding at station locations.
Download-manuals-ground water-manual-gw-volume3fieldmanualhydro-meteorologyp...
This document provides guidance on network design and site selection for hydro-meteorological monitoring stations. It outlines an 11-step process for optimizing an existing network, which involves assessing data needs, prioritizing objectives, determining required network density based on spatial correlation of rainfall/evaporation, reviewing the existing network, selecting additional sites and equipment if needed, estimating costs, and implementing changes. It also describes 8 aspects to consider when selecting sites, including technical, environmental, logistical, security, legal, financial, and practical site visit factors.
R rep-m.2134-2008-pdf-e
This document outlines minimum requirements for IMT-Advanced radio interface technologies. It discusses requirements in several areas:
- Cell spectral efficiency must be at least 2.2 bit/s/Hz/cell for uplink and 2.6 bit/s/Hz/cell for downlink in urban environments.
- Peak spectral efficiency should be at least 15 bit/s/Hz for downlink and 6.75 bit/s/Hz for uplink.
- Scalable bandwidth up to 40 MHz is required, with encouragement for support of up to 100 MHz.
- Cell edge user spectral efficiency is defined but specific values are not given.
Traffic Management Data Dictionary (TMDD) Primer
Internal Work Presentation for TMDD. The presentation discusses the detail of the Nevada DOT data exchange called the NDEX.
CEMS_Guideline_II.pdf
CEMS Guideline. This allows your to discover more about CEMS deployment in Malaysia. Testing of DIS and DAS
DGCA Module 10 CAR Series I Questions.pdf
CAR Series I Important Questions for DGCA Module | Module 10
June 7, 2024 by admin
Practice Questions for CAR Series I (Module 10 ) | Answers are given Below
GIVE MOCK TEST FOR MODULE 10
Question 1/40
The specification of ACAS
1). FAA TSO C- 119
2). Annex IV to the convention of ICAO
3). FAA TSO C-119C
4). None
Question 2/40
Equipment which reduces CFIT is
1). ACAS I
2). ACAS II
3). SSR
4). GPWS
Question 3/40
The information recorded by CVR are
1). Voice communication of flight crew
2). Voice or audio signals identifying navigation
3). Aural environment of flight deck & as in 1& 2
4). None
Question 4/40
The function of ACAS II is
1). Threat detection
2). Communication with ground station
3). Generation of RAS
4). Generation of TAS & as in 1, 2& 3
Question 5/40
MTCS
1). TCAS II with change is equivalent to ACAS I
2). TCAS I with change7.0 is equivalent to ACAS II
3). TCAS II with change 7.1 is equivalent to ACAS II
none.
Question 6/40
GPWS normally provides
1). Excessive terrain closure rate
2). Excessive descent rate
3). Excessive altitude loss
4). All are correct
Question 7/40
EGPWS stands for
1). Extended ground proximity warning system
2). Enhanced ground proximity warning system
3). Exchanged ground proximity warning system
4). Earth & ground proximity warning system
Question 8/40
MTIS against Non- deployable crash protected flight recorder container
1). Be painted a distinctive red and yellow color
2). Carry reflective material to facilitate its location
3). Attached with a automatically activated
underwater locating device
Question 9/40
The operational procedure and the training required for the flight crew on ACAS is as per
1). Opr. Manual
2). Flight manual
3). As in 1 & training manual
4). QCM
Question 10/40
Installation of GPWS is done by
1). Any organization
2). Manufacturer
3). Approved organization and as in 2
4). As in 2& any organization
Question 11/40
All a/c operated at night shall have
1). Red light on RH wing
2). Green light on LH wing
3). White light on the tail
4). All
Question 12/40
The certificate of authorisation for the maintenance of ACAS is given by
RAO
DGCA
OPERATOR
QM
Question 13/40
A surveillance radar which uses transmitter or
interrogator is
1). ACAS I
2). ACAS II
3). RA
4). SSR
Question 14/40
A CVR shall be capable of retaining the information for aeroplane
1). First 30 min. of its operation
2). Last 15 min. of its operation
3). First 15 min. of its operation
4). None
Question 15/40
No. of channels in modern CVR are
A. 2
B. 3
C. 4
D. 5
See also Aerodynamic Master Senthamil Sir Question | DGCA Module 8
Question 16/40
Series I part V deals with
1). CVR
2). FDR
3). GPWS
4). none.
Question 17/40
Forward looking wind shear warning system gives
1). A timely aural and visual warning
2). Information required to permit the pilot to
continue with missed approach
3). As in 2 or go ground
4). As in 3 & to execute an escape maneuver
Question 18/40
Series I part II is issued under rule
1). 133A of IAR 1937
2)
ERASMUS Strategic Deconfliction to Benefit SESAR Presentation 2009
ERASMUS Strategic Deconfliction to Benefit SESAR Presentation 2009Bruce Ware, PMI Certified PM Professional
Using advanced on-board technologies and integrating them with the ground-based ATM automation, ERASMUS was a EuroControl/SESAR research project to determine how to manage trajectories flown in a "semi-autonomous" mode.Improved Safety and Efficiency through the initial application of Data Link E...
Aviation System Block Upgrades
Module N° B0-40/PIA-4
Improved Safety and Efficiency through the initial
application of Data Link En-Route
2005 RSA Conference: Safe at Any Speed
Read the 2005 RSA Conference presentation from William Whyte, Chief Scientist at Security Innovation.
Q4101108111
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
Similar to Aero dataworkshop 2d-module-03_v1.0_en (2) (20)
Generating and Using Meteorological Data in AERMOD
Generating and Using Meteorological Data in AERMOD
FLIGHT INSPECTION of CNS FACILITIES [Compatibility Mode].pdf
FLIGHT INSPECTION of CNS FACILITIES [Compatibility Mode].pdf
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
Download-manuals-surface water-manual-sw-volume3fieldmanualhydro-meteorology...
Download-manuals-ground water-manual-gw-volume3fieldmanualhydro-meteorologyp...
Download-manuals-ground water-manual-gw-volume3fieldmanualhydro-meteorologyp...
Download-manuals-ground water-manual-gw-volume3fieldmanualhydro-meteorologyp...
Download-manuals-ground water-manual-gw-volume3fieldmanualhydro-meteorologyp...
ERASMUS Strategic Deconfliction to Benefit SESAR Presentation 2009
ERASMUS Strategic Deconfliction to Benefit SESAR Presentation 2009
Improved Safety and Efficiency through the initial application of Data Link E...
Improved Safety and Efficiency through the initial application of Data Link E...
More from Indonesia Infrastructure Initiative
World experience-in-railway-restructuring
This document summarizes worldwide experiences restructuring railways across five key issues: industry structure, ownership and control, infrastructure access, regulatory oversight, and community service obligations. It reviews approaches in multiple countries and discusses options like public ownership, outsourcing, concessions, and privatization. The document also discusses ensuring efficient separation of infrastructure from operations. Overall, the summary provides a high-level overview of global experiences restructuring railways and considering issues like competition, investment, and regulation.
Indonesian railways revitalisation bambang susantono, vice minister for tra...
Indonesian railways revitalisation bambang susantono, vice minister for tra...Indonesia Infrastructure Initiative
Indonesia RailwaysWS2 Infrastructure Issues
Dokumen ini membahas masalah infrastruktur terkait dengan Zona Selamat Sekolah (ZoSS), pelican crossings, dan akses ke sekolah di kota Denpasar, Bali. Dokumen ini menjelaskan definisi dari fasilitas tersebut dan lokasi proyek yang akan didesain untuk meningkatkan keselamatan siswa. Dokumen ini juga membahas masalah yang ada terkait fasilitas tersebut dan langkah selanjutnya untuk merancang solusi infra
Development of multimodal transport in north java corridor
This document discusses developing multimodal transport in the North Java Corridor. It identifies the main economic centers and activities in the corridor and notes the need for infrastructure to meet the needs of these economic activities. It then discusses the current transport context and ideal modes for different cargo types. Key obstacles to efficient freight transport by road, rail, sea and lack of intermodal connectivity are identified. The document recommends targeting specific commodities for shifting to rail and sea transport. It outlines the right infrastructure, policies and reforms needed over the short, medium and long term to improve multimodal transport in the corridor.
Railway function in developing multimodal transportation in java
Dokumen tersebut membahas strategi pembangunan transportasi multimoda di Pulau Jawa dengan memanfaatkan peran strategis perkeretaapian untuk menghubungkan wilayah-wilayah strategis seperti pelabuhan, bandara, dan kawasan industri. Pembangunan jalur ganda dan elektrifikasi di beberapa rute utama di Pulau Jawa diharapkan dapat meningkatkan kapasitas angkutan kereta api."
The role of ipc in developing multimodal transportation in java
The document discusses plans to develop transportation infrastructure in Indonesia. It notes that Tanjung Priok Port is the largest in Indonesia and handles about 60% of cargo traffic. Plans are outlined to expand Tanjung Priok and develop a new port called NewPriok to meet growing demand. Integrating NewPriok with a logistics park is discussed to boost trade and employment. Developing multimodal transportation between ports, including a Pendulum Nusantara shipping route, is presented as a way to reduce domestic logistics costs and stimulate domestic trade.
Government strategy in developing multimodal transportation
Government Strategy in Developing Multimodal Transportation
The role of ferry in developing multimodal transportation
Dokumen tersebut membahas mengenai angkutan multimoda dan peran angkutan penyeberangan dalam mendukung sistem transportasi multimoda di Indonesia. Secara ringkas, angkutan multimoda menggunakan minimal dua moda transportasi berbeda berdasarkan satu kontrak, sedangkan angkutan penyeberangan berperan sebagai penghubung antar moda transportasi darat, laut, dan udara untuk meningkatkan aksesibilitas wilayah.
Development of multimodal transportation and inter regional connectivitiy
Development of multimodal transportation and inter regional connectivitiyIndonesia Infrastructure Initiative
Development of Multimodal Transportation and Inter Regional ConnectivitiyWs3 safe system approach (bahasa version)
Dokumen tersebut membahas pendekatan sistem yang aman dalam menangani masalah infrastruktur dan kecelakaan di Indonesia. Pendekatan ini melibatkan berbagai unsur seperti jalan dan kendaraan yang aman, pengguna jalan yang patuh, pendidikan publik, peraturan dan penegakan hukum, serta kerja sama lintas sektor untuk mengurangi kematian akibat kecelakaan.
Ws3 safe system supporting vru (english version)
This document discusses strategies for improving road safety for vulnerable road users in Indonesia. It recommends implementing a "Safe System" approach with four key elements: safe speeds, safe roads, safe road users, and safety management. For each element, the document provides examples of specific countermeasures, such as setting speed limits below 40km/h, building separated cycling and walking infrastructure, conducting educational campaigns on risks like not wearing helmets, and establishing inter-agency partnerships to coordinate road safety efforts. In conclusion, it proposes a six-point plan to apply the Safe System approach in Bandung, Indonesia focusing on speed management, crossing facilities, footpath quality, cycling infrastructure, promotional campaigns, and inter-agency coordination.
Ws3 safe system supporting vru (bahasa version)
Dokumen ini membahas upaya peningkatan keselamatan pengguna jalan rentan di Bandung melalui pengelolaan kecepatan, penyeberangan yang aman, trotoar yang terpelihara, fasilitas bersepeda, kampanye promosi, dan koordinasi antar instansi.
Ws3 presentation
The document discusses community consultation for an integrated urban road safety program in Indonesia. It outlines steps for planning consultation, including conducting surveys of local schools to gather student travel data and stakeholder issues. The surveys would collect information on travel modes, home locations, parking/drop-off areas, crossing locations and speeds. Local organizations, governments or universities could assist with data collection to help plan infrastructure improvements and identify early issues. The goal is to inform, consult and engage stakeholders during the project planning phase.
Ws3 me
Dokumen tersebut membahas kerangka kerja monitoring dan evaluasi untuk proyek infrastruktur. Ia menekankan perlunya mengidentifikasi keluaran-keluaran proyek, merencanakan pelaksanaan dan pemantauan berdasarkan anggaran dan jadwal, serta mengevaluasi pencapaian tujuan jangka pendek dan panjang proyek.
Ws3 infrastructure related to pedestrian safety
Dokumen ini membahas program Integrated Urban Road Safety yang diusulkan untuk kota Medan, Pekanbaru dan Bandung di Indonesia, yang bertujuan untuk mengurangi kecelakaan pejalan kaki dengan memperbaiki kondisi trotoar dan menyediakan fasilitas penyeberangan jalan yang lebih aman. Program ini akan menerapkan perbaikan infrastruktur seperti perpanjangan trotoar, pulau median, dan ruang henti khusus untuk mengurangi konflik lalu lintas
Ws3 gender and disability presentation
Integrated Urban Road Safety Program (IURSP) - Aksesibilitas untuk Orang dengan Kebutuhan Khusus dan Pejalan Kaki Rentan
Ws2 introduction
Integrated Urban Road Safety Program (IURSP) - Pendahuluan Lokakarya dan Perkenalan Tim VicRoads
Workshop #2 safe system approach
Dokumen tersebut membahas pendekatan sistem yang aman dalam menangani masalah infrastruktur dan kecelakaan di Indonesia. Pendekatan ini melibatkan berbagai unsur seperti jalan dan kendaraan yang aman, pengemudi yang terampil, penegakan hukum, serta edukasi masyarakat untuk mencapai tujuan mengurangi kematian akibat kecelakaan.
More from Indonesia Infrastructure Initiative (20)
Indonesian railways revitalisation bambang susantono, vice minister for tra...
Indonesian railways revitalisation bambang susantono, vice minister for tra...
Development of multimodal transport in north java corridor
Development of multimodal transport in north java corridor
Railway function in developing multimodal transportation in java
Railway function in developing multimodal transportation in java
The role of ipc in developing multimodal transportation in java
The role of ipc in developing multimodal transportation in java
Government strategy in developing multimodal transportation
Government strategy in developing multimodal transportation
The role of ferry in developing multimodal transportation
The role of ferry in developing multimodal transportation
Development of multimodal transportation and inter regional connectivitiy
Development of multimodal transportation and inter regional connectivitiy
Recently uploaded
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
CAKE: Sharing Slices of Confidential Data on Blockchain
Presented at the CAiSE 2024 Forum, Intelligent Information Systems, June 6th, Limassol, Cyprus.
Synopsis: Cooperative information systems typically involve various entities in a collaborative process within a distributed environment. Blockchain technology offers a mechanism for automating such processes, even when only partial trust exists among participants. The data stored on the blockchain is replicated across all nodes in the network, ensuring accessibility to all participants. While this aspect facilitates traceability, integrity, and persistence, it poses challenges for adopting public blockchains in enterprise settings due to confidentiality issues. In this paper, we present a software tool named Control Access via Key Encryption (CAKE), designed to ensure data confidentiality in scenarios involving public blockchains. After outlining its core components and functionalities, we showcase the application of CAKE in the context of a real-world cyber-security project within the logistics domain.
Paper: https://doi.org/10.1007/978-3-031-61000-4_16
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
In this blog post, we'll delve into the intersection of AI and app development in Saudi Arabia, focusing on the food delivery sector. We'll explore how AI is revolutionizing the way Saudi consumers order food, how restaurants manage their operations, and how delivery partners navigate the bustling streets of cities like Riyadh, Jeddah, and Dammam. Through real-world case studies, we'll showcase how leading Saudi food delivery apps are leveraging AI to redefine convenience, personalization, and efficiency.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Recently uploaded (20)
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
CAKE: Sharing Slices of Confidential Data on Blockchain
CAKE: Sharing Slices of Confidential Data on Blockchain
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdf
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Ocean lotus Threat actors project by John Sitima 2024 (1).pptx
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Aero dataworkshop 2d-module-03_v1.0_en (2)
- 8. Terrain & Obstacle Data Collection – Area 3 1. Data on terrain and obstacles that extend more than a half-metre (0.5 m) above the horizontal plane passing through the nearest point on the aerodrome/heliport movement area shall be collected and recorded. 2. Terrain and obstacle data in Area 3 shall be collected and recorded in accordance with numerical requirements specified in Table A8-1 and Table A8-2, respectively.
- 9. Terrain Data Collection Surface – Area 4 Only terrain data shall be collected and recorded in Area 4 in accordance with the numerical requirements specified in Table A8-1.
- 14. Statistics ! Dark blue is less than one standard deviation from the mean. For the normal distribution , this accounts for 68.27 % of the set; while two standard deviations from the mean (medium and dark blue) account for 95.45%; three standard deviations (light, medium, and dark blue) account for 99.73%; and four standard deviations account for 99.994%. The two points of the curve which are one standard deviation from the mean are also the inflection points . Source: < http://en.wikipedia.org/wiki/Standard_deviation > z σ percentage within CI percentage outside CI ratio outside CI 1 σ 68.2689492% 31.7310508% 1 / 3.1514871 1.645 σ 90% 10% 1 / 10 1.960 σ 95% 5% 1 / 20 2 σ 95.4499736% 4.5500264% 1 / 21.977894 2.576 σ 99% 1% 1 / 100 3 σ 99.7300204% 0.2699796% 1 / 370.398 3.2906 σ 99.9% 0.1% 1 / 1000 4 σ 99.993666% 0.006334% 1 / 15788 5 σ 99.9999426697% 0.0000573303% 1 / 1744278 6 σ 99.9999998027% 0.0000001973% 1 / 506800000 7 σ 99.9999999997440% 0.0000000002560% 1 / 390600000000