The Assessment of heavy metals distribution and their likely adverse effects in underground
resources of Nnewi town of Anambra State within the sedimentary basin of south eastern Nigeria due to
industries has been studied. The instrument used for data collection includes topographic map, geologic map
aerial photograph, satellite image and fracture maps of Anambra drainage Basin. Ten (10) under ground water
samples from borehole, springs and hand dug wells were collected, this was followed by laboratory studies of
the water samples for the identification of heavy metals present. The result of the analysis of ten(10) water
samples shows that chromium, copper, cadmium and zinc were observed to be high while orgon, mercury,
molybdenum, nickel, lead, zirconium were not detected. The findings also show that cadmium (cd) was not in
some places such as Nnewichi, Otollo and Umudim. Villages in Nnewi town shows an abnormal distribution of
high chromium (cr) copper (cu) and zinc (zn). Above permissible limit, Cadmium causes cancer of the lungs,
and high blood pressure, while chromium causes kidney damage, liver damage, circulatory and nerve tissue
damage. Copper causes anemia, intestinal irritation, while zinc causes growth retardation, delayed sexual
maturation, infection susceptibility and diarrhea. It was suggested that chemical analysis of water should be
carried out periodically in the area since groundwater is subject to seasonal changes.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability
Trace Metals Concentration in Shallow Well Water in Enugu Metropolispaperpublications3
Abstract: This work assesses the concentration of heavy metals in Enugu Municipal well-water considering the fact that some Enugu inhabitants depend on well-water as their major source of water supply. Water from twenty four (24) different hand dug wells from six locations were investigated for Zn, Cu, Pb, Mn, Cd, and Fe using Atomic Absorption Spectroscopy (AAS). The result of the study expressed as the means and standard deviations were compared to WHO and EU standards for drinking water, and it was found that well waters from Iva-Valley and Uwani areas suffer from Cd and Mn pollution. The remaining four locations (Emene, Asata, Abakpa Nike and Achara Layout) were all free from Cd and Mn pollution. Cu, Zn, Fe and Pb concentrations were either completely absent or below world threshold limits at all the locations.
Radiation originates from anthropogenic, primordial, and cosmogenic sources.
The impact of radiation through anthropogenic and cosmogenic sources is negligible
to the environment while the primordial radioactivity is widely distributed in the earth
and its environs. This radioactive material and its Byproducts are found mainly in
diverse geological formations around us. Inadequate access to public water supply in
Abuja has forced more than 80 percent of the population of about 5 million to drill
private boreholes. Nigerian drillers are unaware of high concentrations of
radioactivity present in granitic rocks which vary with depth. The radioactivity of
226Ra as well as 232Th decay chains for the lithological rock samples could be at
equilibrium considering the age as well as the isotopic mass proportion which is
assumed to be equal to its natural isotope. Neutron Activation Analysis (NAA) is
adopted for this study with the aim of minimizing sample size as well as less counting
rate in order to estimate the radioactivity concentration in rock samples. Two
boreholes are drilled in Abuja in order to randomly collect the rock samples from
three different layers of each site. All the samples were duplicated for each
radionuclide examination, resulting to twelve samples in all. The results showed that
the activity concentrations of 226Ra, 232Th and 40K in the two sites were in the order
232Th > 226Ra > 40K. 226Ra and 232Th possess activity concentration
Abstract— This research focuses primarily on the causes, consequences and ways of mitigating the ongoing fresh water pollution problems among Akure communities. Surface water quality of River Ala, which cut across the town of Akure was assessed and three locations (3) were chosen spatially to reflect a consideration of all possible human activities capable of changing the quality of river water. Water samples were analyzed for physio-chemical parameters and it was observed that variations exists in the quality of the sampled waters and impaired to different degrees using WHO drinking water standards for the selected parameters. Leo road (Ala 3) has the highest dissolved solids, which shows that the dumping of waste to the water bodies might have caused the higher occurrence; the PH was low in Ala 3 and high in Ala 1 (Oke-Ijebu) with 6.9 and 7.4 respectively. The water is coloured, total alkalinity total hardness, iron and turbidity were found to be above the WHO standard, therefore not suitable for domestic use.
Assessment of Groundwater Quality in Parts of Ijoko Area, Sango-Otta Axis of ...Scientific Review SR
A total of 26 water samples comprising of well, river and borehole waters were subjected to physico-chemical tests to evaluate its quality. The result of the physical characteristics shows that the average pH value, total dissolved solid and electrical conductivity is 4.9, 1027.31mg/L and 1526.92mg/L respectively. Thus, relatively above the desirable limit for drinking water while the ionic dominance of the major cations and anions reveal high concentration of Na+ and Cl- amidst other ions in the order of Na+>Ca2+>Mg2+> K+ and Cl->HCO3- > SO42- respectively wherein the water was classified as belonging to Na-Cl facies and unsuitable for irrigation purpose.
Qualitative Evaluation and Hydrogeochemical Attributes of Groundwater in Ower...iosrjce
The qualitative evaluation and hydrogeochemical attributes of groundwater in Owerri Capital
Territory Owerri was investigated to assess the quality for human consumption and agricultural purposes. A
total of sixteen (16) groundwater samples were collected and analyzed for physicochemical and biological
properties. The range of temperature (oC), colour (Hz), and turbidity of groundwater in the study area are
between: 20-28.3, 5-15, and 1-50 respectively. The average of pH , conductivity (us/cm),TDS (mg/l), and
hardness (mg/l) are: 7.66, 0.135, 34.64, and 7.94 respectively. The result also reveals that the concentration of
Na+
(mg/l), K+
(mg/l), Ca2+(mg/l), Mg2+(mg/l), Fe+
(mg/l), Pb2+(mg/l),Cd2+(mg/l), Cu+
(mg/l),and Zn2+ (mg/l)
range between: 3.33-7.6, 0.2-6.8, 2.4-8.3,1.02-3.44, 0.001-0.59, 0.001-0.01, 0-0.16, 0.06-2.88 and 0.01-2.18
respectively. Water Classification result of the groundwater samples show the predominance of alkali
bicarbonate water type (Na+ + K+
) - HCO3
-
that is largely soft and therefore, mostly of acceptable quality for
household uses. Sodium Absorption Ratio (SAR) of the groundwater samples in the study area showed that the
samples fall below 1.4meq/l, indicating predominance of excellent water for irrigation purposes in accordance
with recommended standard. This study recommends among other things that groundwater resources
development in the area requires elaborate qualitative assessment, to ensure that any necessary pre-use
treatment is effected.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability
Trace Metals Concentration in Shallow Well Water in Enugu Metropolispaperpublications3
Abstract: This work assesses the concentration of heavy metals in Enugu Municipal well-water considering the fact that some Enugu inhabitants depend on well-water as their major source of water supply. Water from twenty four (24) different hand dug wells from six locations were investigated for Zn, Cu, Pb, Mn, Cd, and Fe using Atomic Absorption Spectroscopy (AAS). The result of the study expressed as the means and standard deviations were compared to WHO and EU standards for drinking water, and it was found that well waters from Iva-Valley and Uwani areas suffer from Cd and Mn pollution. The remaining four locations (Emene, Asata, Abakpa Nike and Achara Layout) were all free from Cd and Mn pollution. Cu, Zn, Fe and Pb concentrations were either completely absent or below world threshold limits at all the locations.
Radiation originates from anthropogenic, primordial, and cosmogenic sources.
The impact of radiation through anthropogenic and cosmogenic sources is negligible
to the environment while the primordial radioactivity is widely distributed in the earth
and its environs. This radioactive material and its Byproducts are found mainly in
diverse geological formations around us. Inadequate access to public water supply in
Abuja has forced more than 80 percent of the population of about 5 million to drill
private boreholes. Nigerian drillers are unaware of high concentrations of
radioactivity present in granitic rocks which vary with depth. The radioactivity of
226Ra as well as 232Th decay chains for the lithological rock samples could be at
equilibrium considering the age as well as the isotopic mass proportion which is
assumed to be equal to its natural isotope. Neutron Activation Analysis (NAA) is
adopted for this study with the aim of minimizing sample size as well as less counting
rate in order to estimate the radioactivity concentration in rock samples. Two
boreholes are drilled in Abuja in order to randomly collect the rock samples from
three different layers of each site. All the samples were duplicated for each
radionuclide examination, resulting to twelve samples in all. The results showed that
the activity concentrations of 226Ra, 232Th and 40K in the two sites were in the order
232Th > 226Ra > 40K. 226Ra and 232Th possess activity concentration
Abstract— This research focuses primarily on the causes, consequences and ways of mitigating the ongoing fresh water pollution problems among Akure communities. Surface water quality of River Ala, which cut across the town of Akure was assessed and three locations (3) were chosen spatially to reflect a consideration of all possible human activities capable of changing the quality of river water. Water samples were analyzed for physio-chemical parameters and it was observed that variations exists in the quality of the sampled waters and impaired to different degrees using WHO drinking water standards for the selected parameters. Leo road (Ala 3) has the highest dissolved solids, which shows that the dumping of waste to the water bodies might have caused the higher occurrence; the PH was low in Ala 3 and high in Ala 1 (Oke-Ijebu) with 6.9 and 7.4 respectively. The water is coloured, total alkalinity total hardness, iron and turbidity were found to be above the WHO standard, therefore not suitable for domestic use.
Assessment of Groundwater Quality in Parts of Ijoko Area, Sango-Otta Axis of ...Scientific Review SR
A total of 26 water samples comprising of well, river and borehole waters were subjected to physico-chemical tests to evaluate its quality. The result of the physical characteristics shows that the average pH value, total dissolved solid and electrical conductivity is 4.9, 1027.31mg/L and 1526.92mg/L respectively. Thus, relatively above the desirable limit for drinking water while the ionic dominance of the major cations and anions reveal high concentration of Na+ and Cl- amidst other ions in the order of Na+>Ca2+>Mg2+> K+ and Cl->HCO3- > SO42- respectively wherein the water was classified as belonging to Na-Cl facies and unsuitable for irrigation purpose.
Qualitative Evaluation and Hydrogeochemical Attributes of Groundwater in Ower...iosrjce
The qualitative evaluation and hydrogeochemical attributes of groundwater in Owerri Capital
Territory Owerri was investigated to assess the quality for human consumption and agricultural purposes. A
total of sixteen (16) groundwater samples were collected and analyzed for physicochemical and biological
properties. The range of temperature (oC), colour (Hz), and turbidity of groundwater in the study area are
between: 20-28.3, 5-15, and 1-50 respectively. The average of pH , conductivity (us/cm),TDS (mg/l), and
hardness (mg/l) are: 7.66, 0.135, 34.64, and 7.94 respectively. The result also reveals that the concentration of
Na+
(mg/l), K+
(mg/l), Ca2+(mg/l), Mg2+(mg/l), Fe+
(mg/l), Pb2+(mg/l),Cd2+(mg/l), Cu+
(mg/l),and Zn2+ (mg/l)
range between: 3.33-7.6, 0.2-6.8, 2.4-8.3,1.02-3.44, 0.001-0.59, 0.001-0.01, 0-0.16, 0.06-2.88 and 0.01-2.18
respectively. Water Classification result of the groundwater samples show the predominance of alkali
bicarbonate water type (Na+ + K+
) - HCO3
-
that is largely soft and therefore, mostly of acceptable quality for
household uses. Sodium Absorption Ratio (SAR) of the groundwater samples in the study area showed that the
samples fall below 1.4meq/l, indicating predominance of excellent water for irrigation purposes in accordance
with recommended standard. This study recommends among other things that groundwater resources
development in the area requires elaborate qualitative assessment, to ensure that any necessary pre-use
treatment is effected.
Comparative Limnological Studies of Nnamdi Azikiwe University (Unizik) and A...Scientific Review SR
The limnological studies of Unizik and Amansea streams, Awka South Local Governments Area,
Anambra State, Nigeria, were carried out using standard methods. The mean water temperature, dissolved oxygen
content, transparency and pH were 26.330C, 2.75 mg/l, 49.10cm and 7.80 respectively, in Unizik Stream. For
Amansea Stream, the values were 26.580C, 2.40mg/l, 35.87cm and 7.70, respectively. The mean BOD,
Alkalinity, water depth and water current values recorded in Unizik stream were 16.00mg/l 119.70mg/l,58.25cm
and 0.45m/s respectively, while in Amansea Stream the values were 11.50mg/l, 111.35mg/l, 59.43cm and 0.39/s
respectively. The physicochemical parameters of the two streams vary spatially. Unizik and Amansea streams
exhibited features that are typical of streams in tropical environment. The low dissolved oxygen content, high
biochemical oxygen demand and low alkalinity values indicate that the water bodies are unsuitable to support
aquatic life.
environmental assessment of vehicular emissionIJEAB
Port Harcourt is a coastal city located in the Niger Delta region of Nigeria, with very short dry season and long heavy rainy season periods. The objective of this study was to assess air pollution level from vehicular emission during the rainy season period. Three locations in the city noted for high traffic congestion were selected for the study. Air sampling in these locations were carried out for 11 days, covering peak and off peak periods. The following air pollutants were measured namely; nitrogen oxides (NOx), sulphur oxides (SOx), carbon monoxide (CO) and unburnt hydrocarbons (CxHy), as well as climatic elements – ambient temperature and relative humidity. The air pollutant levels obtained were compared with local and international standards. CO complied with international standard, but exceeded local standard. There is need for effective air pollution monitoring and control, this will go a long way to reduce the health risk associated with air pollution in the city.
Impact of Iron and Steel Industry on Ground Water Quality of Tungabhadra Rive...IJARIIT
Bellary district has 25 % of India's Iron ore reserves and is well known for its rich iron and manganese ore
reserves. Iron ore deposits in Bellary district are widespread and have been a backbone to industrial development in the region.
The environmental impact of large scale mining activities includes soil erosion, formation of sinkholes, loss of biodiversity,
and contamination of soil, groundwater and surface water by chemicals from mining processes.In this paper, efforts have been
made to assess the quality of Tunga - Bhadra river water extensive survey and laboratory analysis which would give the
information about ‘Impacts on reservoir water quality’ due to the Iron and steel industry. Also an attempt has made for
controlling the groundwater pollution, which would serve as a basis to evolve suitable management strategy for the District.
Therefore there is a significant changes in values of different parameters of ground water sources indicate the influence of
industrial wastes on ground water.
IOSR Journal of Applied Chemistry (IOSR-JAC) is an open access international journal that provides rapid publication (within a month) of articles in all areas of applied chemistry and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in Chemical Science. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
This work contributes to the monitoring of water pollution of some selected Dams in Katsina
State, North western Nigeria by assessing the degree of heavy metal pollution in the Dams sediment samples.
The study was conducted in the year 2017 within some selected Dams in the State (Ajiwa, Zobe,
Sabke/Dannakola) that are beehives of fishing and Agricultural activities in Katsina State. Analysis for the
concentration of these heavy metals; Cr, Cd, Fe, Ni, Mn, Pb and Zn was conducted by the use of AAS (by
Atomic Absorption Spectrophotometry) method. Several indices were used to assess the metal contamination
levels in the sediment samples, namely; Geo-accumulation Index (Igeo), Enrichment Factor (EF),
Contamination Factor (CF), Degree of Contamination (Cd), Pollution Load Index (PLI) and Potential
Ecological Risk Index (PERI). The result of this study has shown that generally among the heavy metals
evaluated, the highest concentration was observed for Fe (range: 2.6718-4.2830 ppm), followed by Zn (range:
0.4265-0.7376 ppm), Cr (range: 0.1106-0.1836 ppm), Cd (range: 0.1333-0.1273 ppm) and Mn (range: 0.1136-
0.1271 ppm). While Pb has the lowest concentration (range: 0.0472-0.0598 ppm). For all the site sampled the
heavy metal Ni was below detection level (BDL). From the results of heavy metals I-geo values, according to
Muller’s classification, all the sediment samples from the selected dams were unpolluted (class 0). The result for
the enrichment factor has shown that for all the selected dam sediment samples the heavy metals show
deficiency to minimal enrichment. Also based on the contamination factors for all sediment samples the heavy
metal Cd has a CF values range of 0.5430-0.6665 (~1), indicating that the sediment samples are moderately
contaminated with Cd. In contrast, the rest of the heavy metals exhibit low contamination in general. The value
of PLI ranges from 0.2408 to 0.4935, indicating unpolluted to moderate pollution. The Eri values for all
samples are all < 40, presenting low ecological risk. The results suggest that the sediment samples from the
selected dams in Katsina state has low contamination by the heavy metals evaluated.
Many people in Africa depend on water from
rivers and borehole, but purity of the drinking water from these
sources remains questionable. Mudzira River being the longest
River in a village called Vimtim located in Mubi North Local
government area in Adamawa State was studied in the months of
September to December, 2012 to ascertain the suitability of the
water for human consumption and other related uses. Five study
point: inlet (A, B), middle (C) and out let (D, E) were adopted for
monitoring the physico-chemical parameters using standard
procedures. The mean total temperature values were A (25.000C),
B (24.500C), C (25.500C), D (24.000C) and E (24.000C. Average P
H
values were A (8.00), B (7.87), C (8.20) D (8.37) and E (8.13). The
average conductivity values were A (73.90
1 cms
), B
(73.11
1 cms
), D (74.00
1 cms
) and E (73. 80
1 cms
). The
average total dissolves solid value of each sample were A (17.10),
B (17.10), C (20.00) D (21.64) and E (21.60.). The average
turbidity value of sample were A (47.00), B (47.00), C (50.00) D
(53.00) and E (50.00). Average total hardness value are A
(20.00mg/l), B (20.00mg/L) C (24.00mg/L), D (20.00mg/L) and E
(20.00mg/L). The average chloride content were A (12mg/L), B
(16mg/L), C (12 mg/L) D (16mg/L) and E (16mg/L). The average
calcium content were A (0.3mg/L) B (0.4mg/L), C (0.3mg/L), D
(0.3mg/L) and E (0.2mg/L). The average content of magnesium
were A (12mg/L), B (16mg/L), C (16Mg/L), D (12mg/L), E
(12mg/L). The lead content of River Mudzira water was
negligible. The mean coliform count were A (4), B (3), C (6), D
(7), and E (4).The values of the parameters studied were within
the WHO/NAFDAC recommended standards, excepts for total
coliform levels. In conclusion Vimtim residents consuming
untreated water from River Mudzira are potentially exposed to
possible acute, sub chronic or even chronic water borne diseases
like typhoid fever, dysentery, diarrhea etc.
HEAVY METALS OF LEAD (PB) ACCUMULATION IN SEAWEED (GRACILARIA SP) CULTIVATION...IAEME Publication
The activities of industrial waste disposal and disasters of Sidoarjo volcanic
mudflow into the river give a negative impact to the surrounding aquatic ecosystems.
But as a fishery center area, its activity depends on the aquatic ecosystem condition.
This study aimed to evaluate the levels of lead (Pb) in seaweed (Gracilaria sp.)
cultivation, sedimentation and water quality of seaweed aquaculture ponds around the
river estuary, the center of industrial waste disposal.. Sample collection of seaweed,
sediment and pond water were conducted using simple random sampling method.
Measurement of the lead (Pb) levels in seaweed, sediment, and pond water samples
used the Atomic Absorption Spectrophotometry (AAS) method. Based on the results of
this study, the concentration of lead metal levels in seaweed and sediment showed the
highest lead metal concentration values of 0.76 mg/kg and 0.58 mg/kg. However, the
concentration of heavy metals and water quality of pound water tended to be stable
with a value of <0.0764 mg / l. In conclusion, there was an increase in the lead metal
concentration in seaweed cultivation and sediment of pond water in normal water
quality conditions.
Calculation of Metal Pollution Index and Enrichment Factor in Sodic Soil from...ijtsrd
In the present paper, the sodic soil samples were collected from the salt production area of Thakhauttaw, Hanlin, Sataung Gyi and Paline, Shwebo District, Sagaing Region. These samples were studied on the elemental analysis using the energy dispersive x ray fluorescence EDXRF spectroscopy. In order to evaluate the contamination status of metals, assessment indices such as metal pollution index MPI and enrichment factors EFs have been calculated by using the metal concentrations from the EDXRF results. The values of metal pollution index MPI for all samples were less than 1. This indicating the sodic soil was no significant of metal pollution. The results of enrichment factors show that Ca and Mn considerable enriched levels in the soil. According to health physics point of view, the overall study suggests that the sodic soil from salt production area were not metal contaminated and long term consumption cannot be cause potential health risks to consumers. Tin Htun Naing | Kyaw Kyaw Naing | Hla Win Aung | Wunna Ko | Khin Maung Htwe "Calculation of Metal Pollution Index and Enrichment Factor in Sodic Soil from Salt Production Area" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26771.pdf Paper URL: https://www.ijtsrd.com/physics/other/26771/calculation-of-metal-pollution-index-and-enrichment-factor-in-sodic-soil-from-salt-production-area/tin-htun-naing
Sea Level Changes as recorded in nature itselfIJERA Editor
The science of sea level changes is quite multi-facetted. The level of the oceans is always changing, both vertically and horizontally. We have documented these changes quite carefully. After the last glaciation maximum, sea level has risen in the order of 120 m. This rise has been oscillatory. We can set frames on the maximum rate of a sea level rise; at the most rapid ice-melting after the Last Ice Age, sea level rose at about 10 ±1 mm/yr. The thermal expansion of water is, of course, a function of the water column heated; hence the effect is zero at the shore where there is no water to expand. The claim by the IPCC on a present sea level rise is greatly exaggerated. Coastal tide gauges give relative rates in the order of 0-2 mm/yr. The value of the absolute rise in sea level varies between 0.0 and 1.1 mm/yr. There are firm reasons to downgrade, even neglect, the fear of a disastrous coastal flooding in the present century.
Comparative Limnological Studies of Nnamdi Azikiwe University (Unizik) and A...Scientific Review SR
The limnological studies of Unizik and Amansea streams, Awka South Local Governments Area,
Anambra State, Nigeria, were carried out using standard methods. The mean water temperature, dissolved oxygen
content, transparency and pH were 26.330C, 2.75 mg/l, 49.10cm and 7.80 respectively, in Unizik Stream. For
Amansea Stream, the values were 26.580C, 2.40mg/l, 35.87cm and 7.70, respectively. The mean BOD,
Alkalinity, water depth and water current values recorded in Unizik stream were 16.00mg/l 119.70mg/l,58.25cm
and 0.45m/s respectively, while in Amansea Stream the values were 11.50mg/l, 111.35mg/l, 59.43cm and 0.39/s
respectively. The physicochemical parameters of the two streams vary spatially. Unizik and Amansea streams
exhibited features that are typical of streams in tropical environment. The low dissolved oxygen content, high
biochemical oxygen demand and low alkalinity values indicate that the water bodies are unsuitable to support
aquatic life.
environmental assessment of vehicular emissionIJEAB
Port Harcourt is a coastal city located in the Niger Delta region of Nigeria, with very short dry season and long heavy rainy season periods. The objective of this study was to assess air pollution level from vehicular emission during the rainy season period. Three locations in the city noted for high traffic congestion were selected for the study. Air sampling in these locations were carried out for 11 days, covering peak and off peak periods. The following air pollutants were measured namely; nitrogen oxides (NOx), sulphur oxides (SOx), carbon monoxide (CO) and unburnt hydrocarbons (CxHy), as well as climatic elements – ambient temperature and relative humidity. The air pollutant levels obtained were compared with local and international standards. CO complied with international standard, but exceeded local standard. There is need for effective air pollution monitoring and control, this will go a long way to reduce the health risk associated with air pollution in the city.
Impact of Iron and Steel Industry on Ground Water Quality of Tungabhadra Rive...IJARIIT
Bellary district has 25 % of India's Iron ore reserves and is well known for its rich iron and manganese ore
reserves. Iron ore deposits in Bellary district are widespread and have been a backbone to industrial development in the region.
The environmental impact of large scale mining activities includes soil erosion, formation of sinkholes, loss of biodiversity,
and contamination of soil, groundwater and surface water by chemicals from mining processes.In this paper, efforts have been
made to assess the quality of Tunga - Bhadra river water extensive survey and laboratory analysis which would give the
information about ‘Impacts on reservoir water quality’ due to the Iron and steel industry. Also an attempt has made for
controlling the groundwater pollution, which would serve as a basis to evolve suitable management strategy for the District.
Therefore there is a significant changes in values of different parameters of ground water sources indicate the influence of
industrial wastes on ground water.
IOSR Journal of Applied Chemistry (IOSR-JAC) is an open access international journal that provides rapid publication (within a month) of articles in all areas of applied chemistry and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in Chemical Science. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
This work contributes to the monitoring of water pollution of some selected Dams in Katsina
State, North western Nigeria by assessing the degree of heavy metal pollution in the Dams sediment samples.
The study was conducted in the year 2017 within some selected Dams in the State (Ajiwa, Zobe,
Sabke/Dannakola) that are beehives of fishing and Agricultural activities in Katsina State. Analysis for the
concentration of these heavy metals; Cr, Cd, Fe, Ni, Mn, Pb and Zn was conducted by the use of AAS (by
Atomic Absorption Spectrophotometry) method. Several indices were used to assess the metal contamination
levels in the sediment samples, namely; Geo-accumulation Index (Igeo), Enrichment Factor (EF),
Contamination Factor (CF), Degree of Contamination (Cd), Pollution Load Index (PLI) and Potential
Ecological Risk Index (PERI). The result of this study has shown that generally among the heavy metals
evaluated, the highest concentration was observed for Fe (range: 2.6718-4.2830 ppm), followed by Zn (range:
0.4265-0.7376 ppm), Cr (range: 0.1106-0.1836 ppm), Cd (range: 0.1333-0.1273 ppm) and Mn (range: 0.1136-
0.1271 ppm). While Pb has the lowest concentration (range: 0.0472-0.0598 ppm). For all the site sampled the
heavy metal Ni was below detection level (BDL). From the results of heavy metals I-geo values, according to
Muller’s classification, all the sediment samples from the selected dams were unpolluted (class 0). The result for
the enrichment factor has shown that for all the selected dam sediment samples the heavy metals show
deficiency to minimal enrichment. Also based on the contamination factors for all sediment samples the heavy
metal Cd has a CF values range of 0.5430-0.6665 (~1), indicating that the sediment samples are moderately
contaminated with Cd. In contrast, the rest of the heavy metals exhibit low contamination in general. The value
of PLI ranges from 0.2408 to 0.4935, indicating unpolluted to moderate pollution. The Eri values for all
samples are all < 40, presenting low ecological risk. The results suggest that the sediment samples from the
selected dams in Katsina state has low contamination by the heavy metals evaluated.
Many people in Africa depend on water from
rivers and borehole, but purity of the drinking water from these
sources remains questionable. Mudzira River being the longest
River in a village called Vimtim located in Mubi North Local
government area in Adamawa State was studied in the months of
September to December, 2012 to ascertain the suitability of the
water for human consumption and other related uses. Five study
point: inlet (A, B), middle (C) and out let (D, E) were adopted for
monitoring the physico-chemical parameters using standard
procedures. The mean total temperature values were A (25.000C),
B (24.500C), C (25.500C), D (24.000C) and E (24.000C. Average P
H
values were A (8.00), B (7.87), C (8.20) D (8.37) and E (8.13). The
average conductivity values were A (73.90
1 cms
), B
(73.11
1 cms
), D (74.00
1 cms
) and E (73. 80
1 cms
). The
average total dissolves solid value of each sample were A (17.10),
B (17.10), C (20.00) D (21.64) and E (21.60.). The average
turbidity value of sample were A (47.00), B (47.00), C (50.00) D
(53.00) and E (50.00). Average total hardness value are A
(20.00mg/l), B (20.00mg/L) C (24.00mg/L), D (20.00mg/L) and E
(20.00mg/L). The average chloride content were A (12mg/L), B
(16mg/L), C (12 mg/L) D (16mg/L) and E (16mg/L). The average
calcium content were A (0.3mg/L) B (0.4mg/L), C (0.3mg/L), D
(0.3mg/L) and E (0.2mg/L). The average content of magnesium
were A (12mg/L), B (16mg/L), C (16Mg/L), D (12mg/L), E
(12mg/L). The lead content of River Mudzira water was
negligible. The mean coliform count were A (4), B (3), C (6), D
(7), and E (4).The values of the parameters studied were within
the WHO/NAFDAC recommended standards, excepts for total
coliform levels. In conclusion Vimtim residents consuming
untreated water from River Mudzira are potentially exposed to
possible acute, sub chronic or even chronic water borne diseases
like typhoid fever, dysentery, diarrhea etc.
HEAVY METALS OF LEAD (PB) ACCUMULATION IN SEAWEED (GRACILARIA SP) CULTIVATION...IAEME Publication
The activities of industrial waste disposal and disasters of Sidoarjo volcanic
mudflow into the river give a negative impact to the surrounding aquatic ecosystems.
But as a fishery center area, its activity depends on the aquatic ecosystem condition.
This study aimed to evaluate the levels of lead (Pb) in seaweed (Gracilaria sp.)
cultivation, sedimentation and water quality of seaweed aquaculture ponds around the
river estuary, the center of industrial waste disposal.. Sample collection of seaweed,
sediment and pond water were conducted using simple random sampling method.
Measurement of the lead (Pb) levels in seaweed, sediment, and pond water samples
used the Atomic Absorption Spectrophotometry (AAS) method. Based on the results of
this study, the concentration of lead metal levels in seaweed and sediment showed the
highest lead metal concentration values of 0.76 mg/kg and 0.58 mg/kg. However, the
concentration of heavy metals and water quality of pound water tended to be stable
with a value of <0.0764 mg / l. In conclusion, there was an increase in the lead metal
concentration in seaweed cultivation and sediment of pond water in normal water
quality conditions.
Calculation of Metal Pollution Index and Enrichment Factor in Sodic Soil from...ijtsrd
In the present paper, the sodic soil samples were collected from the salt production area of Thakhauttaw, Hanlin, Sataung Gyi and Paline, Shwebo District, Sagaing Region. These samples were studied on the elemental analysis using the energy dispersive x ray fluorescence EDXRF spectroscopy. In order to evaluate the contamination status of metals, assessment indices such as metal pollution index MPI and enrichment factors EFs have been calculated by using the metal concentrations from the EDXRF results. The values of metal pollution index MPI for all samples were less than 1. This indicating the sodic soil was no significant of metal pollution. The results of enrichment factors show that Ca and Mn considerable enriched levels in the soil. According to health physics point of view, the overall study suggests that the sodic soil from salt production area were not metal contaminated and long term consumption cannot be cause potential health risks to consumers. Tin Htun Naing | Kyaw Kyaw Naing | Hla Win Aung | Wunna Ko | Khin Maung Htwe "Calculation of Metal Pollution Index and Enrichment Factor in Sodic Soil from Salt Production Area" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26771.pdf Paper URL: https://www.ijtsrd.com/physics/other/26771/calculation-of-metal-pollution-index-and-enrichment-factor-in-sodic-soil-from-salt-production-area/tin-htun-naing
Sea Level Changes as recorded in nature itselfIJERA Editor
The science of sea level changes is quite multi-facetted. The level of the oceans is always changing, both vertically and horizontally. We have documented these changes quite carefully. After the last glaciation maximum, sea level has risen in the order of 120 m. This rise has been oscillatory. We can set frames on the maximum rate of a sea level rise; at the most rapid ice-melting after the Last Ice Age, sea level rose at about 10 ±1 mm/yr. The thermal expansion of water is, of course, a function of the water column heated; hence the effect is zero at the shore where there is no water to expand. The claim by the IPCC on a present sea level rise is greatly exaggerated. Coastal tide gauges give relative rates in the order of 0-2 mm/yr. The value of the absolute rise in sea level varies between 0.0 and 1.1 mm/yr. There are firm reasons to downgrade, even neglect, the fear of a disastrous coastal flooding in the present century.
Synthesis of polymer supported nanoscale zerovalent iron and itsDhiraj Dutta
Nano particles have been vastly and widely used in the sector of environment for various purposes; one of the application is remediation of ground water. In this presentation i have worked out the used of a nano compound(nZVI) entrapping it with a polymer(Alginate) for the removal of various contaminants like Arsenic, Chromium, Fluoride, Nitrate and A dye(Rhodamine B) from drinking water.
Chromium is a metal that exists in several oxidation
• Chromium is a metal that exists in several oxidation or valence states, ranging from chromium (-II) to chromium (+VI).
• Chromium compounds are very stable in the trivalent state and occur naturally in this state in ores such as ferrochromite, or chromite ore.
• Chrome III is an essential nutrient for maintaining blood glucose levels
• The hexavalent, Cr(VI) or chromate, is the second most stable state. It rarely occurs naturally.
Present (2014) geochemical and microbial trends of underground water affecte...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
Detection of the Presence of Heavy Metal Pollutants in Eleme Industrial Area ...theijes
The presenceof some heavy metal pollutants which are deposited on soil in the Eleme environment due to the operational activities of some companies in the area have been studied. Some soil samples in areas situated around industrial installations were collected and analyzed using Atomic Absorption Spectrophotometer (AAS). Results obtained show the presence and concentration distributions of nine heavy metals. The metals are Iron (Fe), Manganese (Mn), Zinc (Zn), Lead (Pb), Copper (Cu), Chromium (Cr), Cobalt (Co) and Cadmium (Cd). It was observed that over 90% of each of the metals was located in communities hosting the industrial corporations while the remaining 10% is distributed to areas away from the source or host communities. This reveals that, a link exists between the pollutants and the activities of these industries.
IOSR Journal of Applied Chemistry (IOSR-JAC) is an open access international journal that provides rapid publication (within a month) of articles in all areas of applied chemistry and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in Chemical Science. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Uranium Concentrations measurement for Ground Water and Soil Samples in Al-Na...IOSR Journals
In this work, Uranium concentrations in groundwater and soil samples from some areas of Al-Najaf city, Iraq were measured solid state nuclear track detector (CR-39) detector technique. The uranium concentration in groundwater samples was found to vary from (1.617782869±0.04342) μgl−1 to (5.079235843±0.137827) μgl−1, while in soil samples vary from (0.093558±0.000938) ppm to (0.184325±0.017511) ppm.
This study showed that levels of uranium concentration in groundwater and soil of study area of were compared with safe limit values recommended by WHO and UNSCEAR below the safe limit
Geochemical Survey, Health and Environmental Implication of Trace Elements in...Premier Publishers
This study involves the geochemical assessment of trace elements of surface soil samples from Owo area in Ondo State, Nigeria. In environmental studies, chemical elements are often distinguished as lithogenic and anthropogenic based on their sources. The knowledge about their distribution in soils is thus crucial for the assessment of the environmental hazards due to chemical pollution of urban soils. In this area, fourteen (14) soil samples were collected and analyzed for the following trace elements – Zinc(Zn), Copper(Cu), Lead(Pb), Arsenic(As), Cadmium(Cd), Titanium(Ti), Strontium(Sr), Zircon(Zr), Molybdenum(Mo), Silver(Ag), Rubidium (Rb), and Tin(Sn) using Atomic Absorption Spectrophotometry (AAS). The background values as determined were as follows: Zn(8.30-8.70ppm), Cu(1.95-2.19ppm), Pb(0.83-0.87ppm) As(0.052-0.054ppm), Cd(0.06-0.07ppm), Ti(0.12-0.14ppm), Sr(0.04-0.05ppm), Zr(0.04-0.05ppm), Mo(0.13-0.14ppm), Ag(0.12 0.13ppm), Rb(0.013-0.014ppm) and Sn(0.07-0.08ppm).The threshold values in (ppm) were: 9.12, 2.69, 0.93, 0.06, 0.07, 0.20, 0.05, 0.06, 0.20, 0.26, 0.02, and 0.11. The increase above the background concentrations is probably anthropogenic. The Anthropogenic Factor (AF) and Geoaccumulation Index (Igeo) were determined for Zn, Pb, Cu and As in order to quantify the level of contamination in the soils. The result revealed an average AF of 1.1 and Igeo of -0.44, 1.00, -1.05 and -0.37. This result indicates uncontaminated to slightly contaminated soil condition. The pH values of the soils, ranging from (5.5-7.7) indicate a slightly acidic to slightly alkaline soils owing to the chemical reactions of the anthropogenic additives. Anthropogenic inputs from the few industries in the area were quite minimal, except for municipal and vehicular contributions. Therefore, monitoring programs should be introduced to check the level of environmental degradation that may result from future anthropogenic perturbations.
The International Journal of Engineering and Science (The IJES)theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
Enrichment Factor and Geo-accumulation Index for Heavy Metals at Industrial Z...iosrjce
This field study was conducted in Al Anbar Province in Iraq in order to identify the level of
contamination inlarge industrial zones, 8samples soil had been collected with depth (0-2)cm, were analyzed by
X-ray Fluorescence for 6 metals (Pb, Ni, Cd, Co, Cr, Cu ).calculated Enrichment Factor and Geo-accumulation
Index to assess quantitatively the influences of human activities by these heavy metals.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
investigative study of seasonal changesIJAEMSJORNAL
Physico-chemical parameters of River Oluwa water in Agbabu, Nigeria were investigated to determine its quality characteristics and establish seasonal effects on the water. Water from the river was collected at five different points in dry season (March, 2008 and 2009) and rainy season (July, 2008 and 2009). Insitu parameters (pH, EC and Turbidity) were measured using Horiba Water Checker Model U-10 while TDS was by Lovibond CM – 21 Tintometer. Subsequently in the Laboratory, Na+ and K+ were determined using flame photometric methods while Ca2+, Mg2+, HCO3-, SO42-, Cl-, PO42- and NO3- were determined by wet analysis. River Oluwa water was alkaline with average pH of 7.41 and 7.53 in dry and rainy seasons respectively. Electrical conductivity (EC) was high during dry season (av. 630.44 µS/cm), but low in the rainy season (av. 317.58 µS/cm) due to long residence time in dry season allowing more water-rock interaction. Turbidity’s average values of 0.14 NTU and 2.29 NTU in dry and rainy seasons respectively suggested moderate pollution with particulate matter. The order of average cations concentrations in the dry and rainy seasons was Ca2+ > K+ > Na+ > Mg2+ while that of the anions was HCO3- > Cl- >SO42- > NO3-. The ions concentrations though lower in rainy season, Ca2+-HCO3- water was dominant in both seasons. Quality evaluation for irrigation revealed that the water was suitable for all irrigation purposes. River Oluwa water was soft, low mineralized, chemically potable, suitable for irrigation but with lower ionic concentrations in rainy season.
A Novel Method for Prevention of Bandwidth Distributed Denial of Service AttacksIJERD Editor
Distributed Denial of Service (DDoS) Attacks became a massive threat to the Internet. Traditional
Architecture of internet is vulnerable to the attacks like DDoS. Attacker primarily acquire his army of Zombies,
then that army will be instructed by the Attacker that when to start an attack and on whom the attack should be
done. In this paper, different techniques which are used to perform DDoS Attacks, Tools that were used to
perform Attacks and Countermeasures in order to detect the attackers and eliminate the Bandwidth Distributed
Denial of Service attacks (B-DDoS) are reviewed. DDoS Attacks were done by using various Flooding
techniques which are used in DDoS attack.
The main purpose of this paper is to design an architecture which can reduce the Bandwidth
Distributed Denial of service Attack and make the victim site or server available for the normal users by
eliminating the zombie machines. Our Primary focus of this paper is to dispute how normal machines are
turning into zombies (Bots), how attack is been initiated, DDoS attack procedure and how an organization can
save their server from being a DDoS victim. In order to present this we implemented a simulated environment
with Cisco switches, Routers, Firewall, some virtual machines and some Attack tools to display a real DDoS
attack. By using Time scheduling, Resource Limiting, System log, Access Control List and some Modular
policy Framework we stopped the attack and identified the Attacker (Bot) machines
Hearing loss is one of the most common human impairments. It is estimated that by year 2015 more
than 700 million people will suffer mild deafness. Most can be helped by hearing aid devices depending on the
severity of their hearing loss. This paper describes the implementation and characterization details of a dual
channel transmitter front end (TFE) for digital hearing aid (DHA) applications that use novel micro
electromechanical- systems (MEMS) audio transducers and ultra-low power-scalable analog-to-digital
converters (ADCs), which enable a very-low form factor, energy-efficient implementation for next-generation
DHA. The contribution of the design is the implementation of the dual channel MEMS microphones and powerscalable
ADC system.
Influence of tensile behaviour of slab on the structural Behaviour of shear c...IJERD Editor
-A composite beam is composed of a steel beam and a slab connected by means of shear connectors
like studs installed on the top flange of the steel beam to form a structure behaving monolithically. This study
analyzes the effects of the tensile behavior of the slab on the structural behavior of the shear connection like slip
stiffness and maximum shear force in composite beams subjected to hogging moment. The results show that the
shear studs located in the crack-concentration zones due to large hogging moments sustain significantly smaller
shear force and slip stiffness than the other zones. Moreover, the reduction of the slip stiffness in the shear
connection appears also to be closely related to the change in the tensile strain of rebar according to the increase
of the load. Further experimental and analytical studies shall be conducted considering variables such as the
reinforcement ratio and the arrangement of shear connectors to achieve efficient design of the shear connection
in composite beams subjected to hogging moment.
Gold prospecting using Remote Sensing ‘A case study of Sudan’IJERD Editor
Gold has been extracted from northeast Africa for more than 5000 years, and this may be the first
place where the metal was extracted. The Arabian-Nubian Shield (ANS) is an exposure of Precambrian
crystalline rocks on the flanks of the Red Sea. The crystalline rocks are mostly Neoproterozoic in age. ANS
includes the nations of Israel, Jordan. Egypt, Saudi Arabia, Sudan, Eritrea, Ethiopia, Yemen, and Somalia.
Arabian Nubian Shield Consists of juvenile continental crest that formed between 900 550 Ma, when intra
oceanic arc welded together along ophiolite decorated arc. Primary Au mineralization probably developed in
association with the growth of intra oceanic arc and evolution of back arc. Multiple episodes of deformation
have obscured the primary metallogenic setting, but at least some of the deposits preserve evidence that they
originate as sea floor massive sulphide deposits.
The Red Sea Hills Region is a vast span of rugged, harsh and inhospitable sector of the Earth with
inimical moon-like terrain, nevertheless since ancient times it is famed to be an abode of gold and was a major
source of wealth for the Pharaohs of ancient Egypt. The Pharaohs old workings have been periodically
rediscovered through time. Recent endeavours by the Geological Research Authority of Sudan led to the
discovery of a score of occurrences with gold and massive sulphide mineralizations. In the nineties of the
previous century the Geological Research Authority of Sudan (GRAS) in cooperation with BRGM utilized
satellite data of Landsat TM using spectral ratio technique to map possible mineralized zones in the Red Sea
Hills of Sudan. The outcome of the study mapped a gossan type gold mineralization. Band ratio technique was
applied to Arbaat area and a signature of alteration zone was detected. The alteration zones are commonly
associated with mineralization. The alteration zones are commonly associated with mineralization. A filed check
confirmed the existence of stock work of gold bearing quartz in the alteration zone. Another type of gold
mineralization that was discovered using remote sensing is the gold associated with metachert in the Atmur
Desert.
Reducing Corrosion Rate by Welding DesignIJERD Editor
The paper addresses the importance of welding design to prevent corrosion at steel. Welding is
used to join pipe, profiles at bridges, spindle, and a lot more part of engineering construction. The
problems happened associated with welding are common issues in these fields, especially corrosion.
Corrosion can be reduced with many methods, they are painting, controlling humidity, and also good
welding design. In the research, it can be found that reducing residual stress on the welding can be
solved in corrosion rate reduction problem.
Preheating on 500oC and 600oC give better condition to reduce corosion rate than condition after
preheating 400oC. For all welding groove type, material with 500oC and 600oC preheating after 14 days
corrosion test is 0,5%-0,69% lost. Material with 400oC preheating after 14 days corrosion test is 0,57%-0,76%
lost.
Welding groove also influence corrosion rate. X and V type welding groove give better condition to reduce
corrosion rate than use 1/2V and 1/2 X welding groove. After 14 days corrosion test, the samples with
X welding groove type is 0,5%-0,57% lost. The samples with V welding groove after 14 days corrosion test is
0,51%-0,59% lost. The samples with 1/2V and 1/2X welding groove after 14 days corrosion test is 0,58%-
0,71% lost.
Router 1X3 – RTL Design and VerificationIJERD Editor
Routing is the process of moving a packet of data from source to destination and enables messages
to pass from one computer to another and eventually reach the target machine. A router is a networking device
that forwards data packets between computer networks. It is connected to two or more data lines from different
networks (as opposed to a network switch, which connects data lines from one single network). This paper,
mainly emphasizes upon the study of router device, it‟s top level architecture, and how various sub-modules of
router i.e. Register, FIFO, FSM and Synchronizer are synthesized, and simulated and finally connected to its top
module.
Active Power Exchange in Distributed Power-Flow Controller (DPFC) At Third Ha...IJERD Editor
This paper presents a component within the flexible ac-transmission system (FACTS) family, called
distributed power-flow controller (DPFC). The DPFC is derived from the unified power-flow controller (UPFC)
with an eliminated common dc link. The DPFC has the same control capabilities as the UPFC, which comprise
the adjustment of the line impedance, the transmission angle, and the bus voltage. The active power exchange
between the shunt and series converters, which is through the common dc link in the UPFC, is now through the
transmission lines at the third-harmonic frequency. DPFC multiple small-size single-phase converters which
reduces the cost of equipment, no voltage isolation between phases, increases redundancy and there by
reliability increases. The principle and analysis of the DPFC are presented in this paper and the corresponding
simulation results that are carried out on a scaled prototype are also shown.
Mitigation of Voltage Sag/Swell with Fuzzy Control Reduced Rating DVRIJERD Editor
Power quality has been an issue that is becoming increasingly pivotal in industrial electricity
consumers point of view in recent times. Modern industries employ Sensitive power electronic equipments,
control devices and non-linear loads as part of automated processes to increase energy efficiency and
productivity. Voltage disturbances are the most common power quality problem due to this the use of a large
numbers of sophisticated and sensitive electronic equipment in industrial systems is increased. This paper
discusses the design and simulation of dynamic voltage restorer for improvement of power quality and
reduce the harmonics distortion of sensitive loads. Power quality problem is occurring at non-standard
voltage, current and frequency. Electronic devices are very sensitive loads. In power system voltage sag,
swell, flicker and harmonics are some of the problem to the sensitive load. The compensation capability
of a DVR depends primarily on the maximum voltage injection ability and the amount of stored
energy available within the restorer. This device is connected in series with the distribution feeder at
medium voltage. A fuzzy logic control is used to produce the gate pulses for control circuit of DVR and the
circuit is simulated by using MATLAB/SIMULINK software.
Study on the Fused Deposition Modelling In Additive ManufacturingIJERD Editor
Additive manufacturing process, also popularly known as 3-D printing, is a process where a product
is created in a succession of layers. It is based on a novel materials incremental manufacturing philosophy.
Unlike conventional manufacturing processes where material is removed from a given work price to derive the
final shape of a product, 3-D printing develops the product from scratch thus obviating the necessity to cut away
materials. This prevents wastage of raw materials. Commonly used raw materials for the process are ABS
plastic, PLA and nylon. Recently the use of gold, bronze and wood has also been implemented. The complexity
factor of this process is 0% as in any object of any shape and size can be manufactured.
Spyware triggering system by particular string valueIJERD Editor
This computer programme can be used for good and bad purpose in hacking or in any general
purpose. We can say it is next step for hacking techniques such as keylogger and spyware. Once in this system if
user or hacker store particular string as a input after that software continually compare typing activity of user
with that stored string and if it is match then launch spyware programme.
A Blind Steganalysis on JPEG Gray Level Image Based on Statistical Features a...IJERD Editor
This paper presents a blind steganalysis technique to effectively attack the JPEG steganographic
schemes i.e. Jsteg, F5, Outguess and DWT Based. The proposed method exploits the correlations between
block-DCTcoefficients from intra-block and inter-block relation and the statistical moments of characteristic
functions of the test image is selected as features. The features are extracted from the BDCT JPEG 2-array.
Support Vector Machine with cross-validation is implemented for the classification.The proposed scheme gives
improved outcome in attacking.
Secure Image Transmission for Cloud Storage System Using Hybrid SchemeIJERD Editor
- Data over the cloud is transferred or transmitted between servers and users. Privacy of that
data is very important as it belongs to personal information. If data get hacked by the hacker, can be
used to defame a person’s social data. Sometimes delay are held during data transmission. i.e. Mobile
communication, bandwidth is low. Hence compression algorithms are proposed for fast and efficient
transmission, encryption is used for security purposes and blurring is used by providing additional
layers of security. These algorithms are hybridized for having a robust and efficient security and
transmission over cloud storage system.
Application of Buckley-Leverett Equation in Modeling the Radius of Invasion i...IJERD Editor
A thorough review of existing literature indicates that the Buckley-Leverett equation only analyzes
waterflood practices directly without any adjustments on real reservoir scenarios. By doing so, quite a number
of errors are introduced into these analyses. Also, for most waterflood scenarios, a radial investigation is more
appropriate than a simplified linear system. This study investigates the adoption of the Buckley-Leverett
equation to estimate the radius invasion of the displacing fluid during waterflooding. The model is also adopted
for a Microbial flood and a comparative analysis is conducted for both waterflooding and microbial flooding.
Results shown from the analysis doesn’t only records a success in determining the radial distance of the leading
edge of water during the flooding process, but also gives a clearer understanding of the applicability of
microbes to enhance oil production through in-situ production of bio-products like bio surfactans, biogenic
gases, bio acids etc.
Gesture Gaming on the World Wide Web Using an Ordinary Web CameraIJERD Editor
- Gesture gaming is a method by which users having a laptop/pc/x-box play games using natural or
bodily gestures. This paper presents a way of playing free flash games on the internet using an ordinary webcam
with the help of open source technologies. Emphasis in human activity recognition is given on the pose
estimation and the consistency in the pose of the player. These are estimated with the help of an ordinary web
camera having different resolutions from VGA to 20mps. Our work involved giving a 10 second documentary to
the user on how to play a particular game using gestures and what are the various kinds of gestures that can be
performed in front of the system. The initial inputs of the RGB values for the gesture component is obtained by
instructing the user to place his component in a red box in about 10 seconds after the short documentary before
the game is finished. Later the system opens the concerned game on the internet on popular flash game sites like
miniclip, games arcade, GameStop etc and loads the game clicking at various places and brings the state to a
place where the user is to perform only gestures to start playing the game. At any point of time the user can call
off the game by hitting the esc key and the program will release all of the controls and return to the desktop. It
was noted that the results obtained using an ordinary webcam matched that of the Kinect and the users could
relive the gaming experience of the free flash games on the net. Therefore effective in game advertising could
also be achieved thus resulting in a disruptive growth to the advertising firms.
Hardware Analysis of Resonant Frequency Converter Using Isolated Circuits And...IJERD Editor
-LLC resonant frequency converter is basically a combo of series as well as parallel resonant ckt. For
LCC resonant converter it is associated with a disadvantage that, though it has two resonant frequencies, the
lower resonant frequency is in ZCS region[5]. For this application, we are not able to design the converter
working at this resonant frequency. LLC resonant converter existed for a very long time but because of
unknown characteristic of this converter it was used as a series resonant converter with basically a passive
(resistive) load. . Here, it was designed to operate in switching frequency higher than resonant frequency of the
series resonant tank of Lr and Cr converter acts very similar to Series Resonant Converter. The benefit of LLC
resonant converter is narrow switching frequency range with light load[6] . Basically, the control ckt plays a
very imp. role and hence 555 Timer used here provides a perfect square wave as the control ckt provides no
slew rate which makes the square wave really strong and impenetrable. The dead band circuit provides the
exclusive dead band in micro seconds so as to avoid the simultaneous firing of two pairs of IGBT’s where one
pair switches off and the other on for a slightest period of time. Hence, the isolator ckt here is associated with
each and every ckt used because it acts as a driver and an isolation to each of the IGBT is provided with one
exclusive transformer supply[3]. The IGBT’s are fired using the appropriate signal using the previous boards
and hence at last a high frequency rectifier ckt with a filtering capacitor is used to get an exact dc
waveform .The basic goal of this particular analysis is to observe the wave forms and characteristics of
converters with differently positioned passive elements in the form of tank circuits.
Simulated Analysis of Resonant Frequency Converter Using Different Tank Circu...IJERD Editor
LLC resonant frequency converter is basically a combo of series as well as parallel resonant ckt. For
LCC resonant converter it is associated with a disadvantage that, though it has two resonant frequencies, the
lower resonant frequency is in ZCS region [5]. For this application, we are not able to design the converter
working at this resonant frequency. LLC resonant converter existed for a very long time but because of
unknown characteristic of this converter it was used as a series resonant converter with basically a passive
(resistive) load. . Here, it was designed to operate in switching frequency higher than resonant frequency of the
series resonant tank of Lr and Cr converter acts very similar to Series Resonant Converter. The benefit of LLC
resonant converter is narrow switching frequency range with light load[6] . Basically, the control ckt plays a
very imp. role and hence 555 Timer used here provides a perfect square wave as the control ckt provides no
slew rate which makes the square wave really strong and impenetrable. The dead band circuit provides the
exclusive dead band in micro seconds so as to avoid the simultaneous firing of two pairs of IGBT’s where one
pair switches off and the other on for a slightest period of time. Hence, the isolator ckt here is associated with
each and every ckt used because it acts as a driver and an isolation to each of the IGBT is provided with one
exclusive transformer supply[3]. The IGBT’s are fired using the appropriate signal using the previous boards
and hence at last a high frequency rectifier ckt with a filtering capacitor is used to get an exact dc
waveform .The basic goal of this particular analysis is to observe the wave forms and characteristics of
converters with differently positioned passive elements in the form of tank circuits. The supported simulation
is done through PSIM 6.0 software tool
Amateurs Radio operator, also known as HAM communicates with other HAMs through Radio
waves. Wireless communication in which Moon is used as natural satellite is called Moon-bounce or EME
(Earth -Moon-Earth) technique. Long distance communication (DXing) using Very High Frequency (VHF)
operated amateur HAM radio was difficult. Even with the modest setup having good transceiver, power
amplifier and high gain antenna with high directivity, VHF DXing is possible. Generally 2X11 YAGI antenna
along with rotor to set horizontal and vertical angle is used. Moon tracking software gives exact location,
visibility of Moon at both the stations and other vital data to acquire real time position of moon.
“MS-Extractor: An Innovative Approach to Extract Microsatellites on „Y‟ Chrom...IJERD Editor
Simple Sequence Repeats (SSR), also known as Microsatellites, have been extensively used as
molecular markers due to their abundance and high degree of polymorphism. The nucleotide sequences of
polymorphic forms of the same gene should be 99.9% identical. So, Microsatellites extraction from the Gene is
crucial. However, Microsatellites repeat count is compared, if they differ largely, he has some disorder. The Y
chromosome likely contains 50 to 60 genes that provide instructions for making proteins. Because only males
have the Y chromosome, the genes on this chromosome tend to be involved in male sex determination and
development. Several Microsatellite Extractors exist and they fail to extract microsatellites on large data sets of
giga bytes and tera bytes in size. The proposed tool “MS-Extractor: An Innovative Approach to extract
Microsatellites on „Y‟ Chromosome” can extract both Perfect as well as Imperfect Microsatellites from large
data sets of human genome „Y‟. The proposed system uses string matching with sliding window approach to
locate Microsatellites and extracts them.
Importance of Measurements in Smart GridIJERD Editor
- The need to get reliable supply, independence from fossil fuels, and capability to provide clean
energy at a fixed and lower cost, the existing power grid structure is transforming into Smart Grid. The
development of a smart energy distribution grid is a current goal of many nations. A Smart Grid should have
new capabilities such as self-healing, high reliability, energy management, and real-time pricing. This new era
of smart future grid will lead to major changes in existing technologies at generation, transmission and
distribution levels. The incorporation of renewable energy resources and distribution generators in the existing
grid will increase the complexity, optimization problems and instability of the system. This will lead to a
paradigm shift in the instrumentation and control requirements for Smart Grids for high quality, stable and
reliable electricity supply of power. The monitoring of the grid system state and stability relies on the
availability of reliable measurement of data. In this paper the measurement areas that highlight new
measurement challenges, development of the Smart Meters and the critical parameters of electric energy to be
monitored for improving the reliability of power systems has been discussed.
Study of Macro level Properties of SCC using GGBS and Lime stone powderIJERD Editor
One of the major environmental concerns is the disposal of the waste materials and utilization of
industrial by products. Lime stone quarries will produce millions of tons waste dust powder every year. Having
considerable high degree of fineness in comparision to cement this material may be utilized as a partial
replacement to cement. For this purpose an experiment is conducted to investigate the possibility of using lime
stone powder in the production of SCC with combined use GGBS and how it affects the fresh and mechanical
properties of SCC. First SCC is made by replacing cement with GGBS in percentages like 10, 20, 30, 40, 50 and
by taking the optimum mix with GGBS lime stone powder is blended to mix in percentages like 5, 10, 15, 20 as
a partial replacement to cement. Test results shows that the SCC mix with combination of 30% GGBS and 15%
limestone powder gives maximum compressive strength and fresh properties are also in the limits prescribed by
the EFNARC.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
Assessment of Heavy Metals in Nnewi under Ground Water
1. International Journal of Engineering Research and Development
e-ISSN: 2278-067X, p-ISSN: 2278-800X, www.ijerd.com
Volume 10, Issue 11 (November 2014), PP.01-05
1
Assessment of Heavy Metals in Nnewi under Ground Water
Onunkwo A A., Nwagbara J.O. And Ahiarakwem .C.A
Department Of Geosciences, Federal University of Technology Owerri
Abstract:- The Assessment of heavy metals distribution and their likely adverse effects in underground
resources of Nnewi town of Anambra State within the sedimentary basin of south eastern Nigeria due to
industries has been studied. The instrument used for data collection includes topographic map, geologic map
aerial photograph, satellite image and fracture maps of Anambra drainage Basin. Ten (10) under ground water
samples from borehole, springs and hand dug wells were collected, this was followed by laboratory studies of
the water samples for the identification of heavy metals present. The result of the analysis of ten(10) water
samples shows that chromium, copper, cadmium and zinc were observed to be high while orgon, mercury,
molybdenum, nickel, lead, zirconium were not detected. The findings also show that cadmium (cd) was not in
some places such as Nnewichi, Otollo and Umudim. Villages in Nnewi town shows an abnormal distribution of
high chromium (cr) copper (cu) and zinc (zn). Above permissible limit, Cadmium causes cancer of the lungs,
and high blood pressure, while chromium causes kidney damage, liver damage, circulatory and nerve tissue
damage. Copper causes anemia, intestinal irritation, while zinc causes growth retardation, delayed sexual
maturation, infection susceptibility and diarrhea. It was suggested that chemical analysis of water should be
carried out periodically in the area since groundwater is subject to seasonal changes.
Keywords:- Anambra Basin, Heavy Metals, Industries, Diseases, Nnewi.
I. INTRODUCTION
The concentration of industries in Nnewi Town of Anambra State which are concerned with
automobile metals, paints, spoons and pots and these constitute industrial clusters.
The area involved should be verified for toxic heavy metals, since they depend on borehole waters
Adeyemi et al, (2007). According to the author, metals in underground water which may be carcinogenic are
argon, calcium, chromium, copper, mercury, molybdenum, Nickel, lead, zinc and zirconium. They can enter
human bodies when a person drinks underground water that is contaminated by them (Down and stock 1997).
At high concentrations, they can lead to poisoning (Vodela et al 1997) World health organization WHO (2007),
provided a guideline for accessing the limit of acceptance for the heavy metals, according to (Buynevich,
2011), they can lead to such ailments as high blood pressure, anaemia, intestinal irritation, damages to the
nervous system, cancer of the lungs, nose cancer , kidney damage, growth retardation, eye and skin irritation.
At high concentrations, these heavy metals enter human body through drinking water contaminated by them
(Vodela et al 1997) the purpose of this work is therefore to access the concentration of the selected heavy
metals in the underground water regime of Nnewi Area .
The heavy metals in underground water are Argon, cadmium, chromium copper, mercury,
molybdenum, Nickel, lead, zinc and zirconium.
Nnewi is located within Anambra sedimentary Basin of South Eastern Nigeria (Reymet, 1965).
It is bounded by latitude 60
551
51” (Ofomata, 1985). The topography is undulating and has average
elevation of 93m (Ofomata, 1978). Drainage system is dendrite (Iloije 1995). Vegetation is of tropical type
characteristic of south eastern Nigeria (Iloije 1995). It has a tropical climate and experiences two air masses-
Equatorial maritime air masses associated with rain bearing south west winds from Atlantic Ocean, and dry and
dusty harmattan wind from Sahara desert (Igbozurike, 1995). According to (Igbozurike 1995) the rainy season
lasts from April to October, while the dry season lasts from November to March. The hottest period is between
February and April ((Iloije 1981), while the average minimum temperature is between 250
C to 320
C.
According to (Iloije 1981) the humidity lies between 40% to 92% and appears high during the early
hours of the day. The aquiferous source are those of Ameki/Nanka sands (Uma 1987). The study area therefore
falls within Anambra Basin of South eastern Nigeria and underlain by Ameki/Nanka Sands which is Eocene in
age (Uma, 1987).
2. Assessment of Heavy Metals In Nnewi Under Ground Water
2
Table 1: Generalized sedimentary sequence in south eastern Nigeria (modified from hoque, 1976)
Fig 1: The stratigraphic succession of the area is shown in table 1
Fig 2: The topographic map of the area.
AGE L1 THOSTRATGRAPHIC
SEQUENCE
PETROLOGY OF
SANDSTONE
BASIN
EOCENE AMEKI FORMATION QUARTZ ANAMBRA
ARENITE
PALEOCENE IMO SHALE AND
UPPER NSUKA FM
CRETACEOUS AJALLI SANDSTONE AFIKPO
MAESTRICHTIAN MAMU FM BASIN
CAMPANIAN NKPORO SHALE
CANIACIAN FELDSPATHIC ABAKILIKI
SANTONIAN AWGU SHALE SAND STONE BASIN
TURONIAN EZEAKU SHALE
CENOMANIAN ODUKPANI FM
LOWER ASU RIVER
CRETACEOUS GROUP
ALBIAN
3. Assessment of Heavy Metals In Nnewi Under Ground Water
3
II. METHOD OF STUDY
The work was carried out in stages and involved review of reconnaissance work. Topographic and
geologic maps of Anambra Basin on a scale of 1:125,000 was employed in the identification of rock
formations and in establishing their stratigraphic/structural relationships and also detailed surface/subsurface
and hydrologic studies were carved out. Activities involve the determination of volume mean levels, collection
of underground water samples from boreholes and hand dug wells. The final phase was used for laboratory
studies in which chemical analysis of water samples were carried out.
The instrument used for data acquisition include topographic map of the area, geologic map, aerial
photograph, satellite images and fracture maps of Anambra drainage Basin.
Hydro geological investigations were carried out by identifying areas of ground water. Samples were
arranged after digestion for the identification of heavy metals (Petti John, 1975), using 20 atomic
spectrophotometer. The calibration pot method was used for the analysis. Air-acetylene was the frame used and
hollow cathode lamp of the corresponding elements was the resonance line source. The wave lengths for the
determination of the elements were 193.7, 228.8, 327.4, 379.4, 253.7, 313.26, 352.5, 217.0, 211.248 and 213.9
respectively. The digested samples were analyzed in duplicates with average concentration of the metals
present, being analyzed in mg/L. by the instrument after extrapolation from the standard curried. The results of
the analysis of ten (10) underground water samples were shown in table2.
Table 2: Result of heavy metal analysis in water samples
S/NO SAMLE
CODE
1 2 3 4 5 6 7 8 9 10
(PPm
)
Ar
(PPm
)
Cd
(PPm
)
Cr
(PPm)
Cu
(PPm
)
Hg
(PPm
)
Mo
(PPm
)
Ni
(PPm
)
Pb
(PPm
)
Zn
(PPm
)
Zr
1 URUAJU A ND 0.001 0.024 0.044 ND ND ND ND 0.068 ND
2 NNEUILU B ND ND 0.019 0.0039 ND ND ND ND 0.060 ND
3 OTOLO C ND ND 0.022 0.033 ND ND ND ND 0.046 ND
4 UMUDIU D ND ND 0.023 0.042 ND ND ND ND 0.033 ND
5 UROGU E ND 0.002 0.031 0.050 ND ND ND ND 0.125 ND
6 OTOLO F ND ND 0.023 0.034 ND ND ND ND 0.045 ND
7 URAFU G ND 0.001 0.025 0.043 ND ND ND ND 0.061 ND
8 UMUDIM H ND ND 0.020 0.040 ND ND ND ND 0.034 ND
9 URUOGU I ND 0.001 0.032 0.051 ND ND ND ND 0.124 ND
10 NNEUICHI J ND ND 0.018 0.034 ND ND ND ND 0.058 ND
Maximum
contamination level
for the detectable
metals
0.005 0.1 1.3 5
4. Assessment of Heavy Metals In Nnewi Under Ground Water
4
Out of the ten water sample analyzed cadmium, chromium, copper and zinc were observed to have abnormal
high concentrations, while Argon, mercury, molybdenum, Nickel, lead and zirconium were not detected.
III. RESULTS
Results from all available underground water analysis after all necessary compilations were presented.
Chromium copper, cadmium and zinc were observed to be high while Argon, Mercury, molybdenum, nickel,
lead zirconium were not observed.
The water analysis records of the area were compared with maximum concentration level according to
United States environmental protection agency 2013 (USEPA, 2013). The histogram of the distribution is shown
in fig 3.
Fig 3: The histogram of the distribution of heavy metals in the area
The findings also shows that cadmium was not detected in some places, such as Nnewichi, Otolo and Umudim.
All the village show an abnormal distribution of chromium (Cr), copper (Cu) and Zinc (Zn).
According to Robbert (1999), cadmium causes lung cancer, blood pressure, while chromium brings
about kidney, liver damage circulatory and nerve tissue damage. From the findings of Tsvetkovagoleva and
simeonovez (1984), copper causes anemia, liver irritation, stomach irritation and intestinal irritation while zinc
brings about growth retardation, delayed sexual maturation, infection susceptibility and diarrhea. The undetected
metals – Argon (Ar), Mercury (Hg), Molybdenum (Mo) Nickel (Ni) and zeconium (Zr) indicated their probably
the industries in these areas dispose their wastes properly. Onunkwo-Akunne and Uzoije (2010). The fact that
ground water is the only source of water supply in the area it should be tested periodically and seasonally too.
Water chemistry examinations should be carried out seasonally since ground water is subject to periodical
regional climatic changes (woolseyer et al (19975). Awareness should be created and brought to the knowledge
of the community. There should be public orientation programme enlightening the community on the dangers of
excess heavy metals in underground portable waters. Health institutions should be alerted on this discovery.
5. Assessment of Heavy Metals In Nnewi Under Ground Water
5
REFERENCES
[1]. Adeyemi et al (2007. Physico chemical and microbial characteristics of leachate contaminated
ground water pp 34-40
[2]. Buynevich, I.V etal (2007). Litho logical anomalies in a relic coastal dune: pale environmental markers
pp 235=240
[3]. Down P.C and stock R.N (19770. Environmental impact of mining. Applies science publishers, pp 120-
135
[4]. Igbozulike, M.U, (1975). Vegetation types in Oformate, GEK Edition. Nigeria in maps Eastern State ,
Ethiopia publishing house Benin pp 27-28.
[5]. Iloije N.P (1981). A new geography of Nigeria.
[6]. Petti John F.J. (1975). Sedimentary rocks Harper & Row, London pp 628.
[7]. Uma, K.O. (1987). Appropriate investigation techniques for water supplies to rural communication in
Nigeria 2nd
proceedings of the conference Nigeria water sanitation Association (NIWASA) pp 3-8.
[8]. U.S.E.P.A. (2013). United State Environmental protection Agency, beccles, London pp 85-120.
[9]. Vodela J. Keta (1997). Drinking water contaminants pollution science , water contamination India pp
125-130.
[10]. Who (2007). Water for pharmaceutical use in Quality assurance of pharmaceuticals compelium of
quide ling and relate materials, world health organization general pp 170-178.
[11]. William clowes (Becc/es) Ltd Becc/es London. Pp 85-120.
[12]. Wolesey et al (1975). B lack Shmove heavy metal concentration on Sapelo Island Geogia Journal of
sedimentary Research pp 280-284.