8th Grade Chapter 4 Lesson 5
•
1 like•922 views
This document discusses Bernoulli's principle and its application to flight. It explains that Bernoulli's principle states that the pressure exerted by a moving fluid decreases as the fluid's velocity increases. The Wright brothers were the first to achieve powered flight using this principle. Airplanes and helicopters are able to fly through the lifting force generated by the differences in pressure above and below their wings or rotors as the fluid (air) flows around them. The document also briefly discusses fluid dynamics in baseball pitching and car engines.
Report
Share
Report
Share
![Fluid Movement ,[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Project Aeroplane (Short Review)
This Powerpoint Presentation reviews on the topic - Aeroplane and Its Parts (With aerodynamics).
It was made for Educational Purpose.
If anyone want source file, E-mail:- moideenthashreef@hotmail.com
Theory of flight final
This document discusses aircraft flight control systems. It describes three main categories of flight controls: primary, secondary, and auxiliary.
Primary flight controls include elevators, ailerons, and the rudder. Elevators control pitch, ailerons control roll, and the rudder controls yaw. Secondary flight controls include trim tabs which help balance aircraft control forces. Auxiliary controls include flaps and other high lift devices which allow aircraft to fly at slower speeds. The document provides details on how each of these various control surfaces and systems function.
Principles Of Flight
Powered Flight explained from First Principles. Starts with Sir Issac Newton's Laws of motion. Explains concepts of Weight, Lift, Drag and Thrust. Controlling the flight using concepts of Pitch, Roll & Yaw explained with illustrations.How this is explained with the help of Ailerons, Rudder and Elevators explained. Clear visuals provided.
Basic Aerodynamics.Ppt
This document provides a basic introduction to the fundamentals of flight, including the four forces of flight and explanations of lift. It discusses Newton's Laws of Motion and Bernoulli's Principle and how they relate to the generation of lift on airplane wings. It also describes basic airplane control surfaces like the elevator, ailerons, and rudder and how they control pitch, roll, and yaw. Interactive elements demonstrate wing shapes and how aircraft can fly inverted. Overall, the document covers aerodynamic concepts and forces essential to understanding how airplanes are able to fly.
Aircraft & dynamics of flight
The document provides information about aircraft and aviation. It discusses the history of aviation from early pioneers to modern aircraft. Various types of aircraft are described including propeller, jet, and rotorcraft. Details are given about aircraft engines, how wings create lift, and how pilots control planes. The document also covers topics like overcoming the sound barrier, aviation education in Bangladesh, and career opportunities in the aviation industry.
Basics of Flight and Aerodynamics (Groups B/D)
In this presentation, you will learn how the airfoil works and how it produces lift. Also, you will learn what four basic foces of flight are acting upon the plane during flight and how they affect the way the plane flies.
How does a plane fly?
Air transportation is the safest form of transport. There are approximately 200,000 flights per day worldwide. The presentation discusses how airplanes fly through aerodynamic forces of thrust, drag, lift, and weight. It explains how jet engines produce thrust to propel planes and how the shape of wings generates lift. Control surfaces like ailerons, elevators, rudders, and flaps help pilots control the aircraft during different phases of flight such as takeoff, cruise, descent, and landing.
The science behind how planes fly
The document discusses the science behind how planes fly. It explains that four main aerodynamic forces - lift, gravity, thrust, and drag - work together to enable flight. Lift is generated by the wings and counteracts gravity. Thrust from the engines overcomes drag. While Bernoulli's principle and Newton's laws both play a role in generating lift, modern research indicates lift requires power to divert air downward which creates an equal reaction upward. The angle of attack and design of the wings are also important for maintaining proper lift. Pilots control various surfaces like the ailerons, elevators, rudder, and flaps to maneuver the plane during flight.
Recommended
Project Aeroplane (Short Review)
This Powerpoint Presentation reviews on the topic - Aeroplane and Its Parts (With aerodynamics).
It was made for Educational Purpose.
If anyone want source file, E-mail:- moideenthashreef@hotmail.com
Theory of flight final
This document discusses aircraft flight control systems. It describes three main categories of flight controls: primary, secondary, and auxiliary.
Primary flight controls include elevators, ailerons, and the rudder. Elevators control pitch, ailerons control roll, and the rudder controls yaw. Secondary flight controls include trim tabs which help balance aircraft control forces. Auxiliary controls include flaps and other high lift devices which allow aircraft to fly at slower speeds. The document provides details on how each of these various control surfaces and systems function.
Principles Of Flight
Powered Flight explained from First Principles. Starts with Sir Issac Newton's Laws of motion. Explains concepts of Weight, Lift, Drag and Thrust. Controlling the flight using concepts of Pitch, Roll & Yaw explained with illustrations.How this is explained with the help of Ailerons, Rudder and Elevators explained. Clear visuals provided.
Basic Aerodynamics.Ppt
This document provides a basic introduction to the fundamentals of flight, including the four forces of flight and explanations of lift. It discusses Newton's Laws of Motion and Bernoulli's Principle and how they relate to the generation of lift on airplane wings. It also describes basic airplane control surfaces like the elevator, ailerons, and rudder and how they control pitch, roll, and yaw. Interactive elements demonstrate wing shapes and how aircraft can fly inverted. Overall, the document covers aerodynamic concepts and forces essential to understanding how airplanes are able to fly.
Aircraft & dynamics of flight
The document provides information about aircraft and aviation. It discusses the history of aviation from early pioneers to modern aircraft. Various types of aircraft are described including propeller, jet, and rotorcraft. Details are given about aircraft engines, how wings create lift, and how pilots control planes. The document also covers topics like overcoming the sound barrier, aviation education in Bangladesh, and career opportunities in the aviation industry.
Basics of Flight and Aerodynamics (Groups B/D)
In this presentation, you will learn how the airfoil works and how it produces lift. Also, you will learn what four basic foces of flight are acting upon the plane during flight and how they affect the way the plane flies.
How does a plane fly?
Air transportation is the safest form of transport. There are approximately 200,000 flights per day worldwide. The presentation discusses how airplanes fly through aerodynamic forces of thrust, drag, lift, and weight. It explains how jet engines produce thrust to propel planes and how the shape of wings generates lift. Control surfaces like ailerons, elevators, rudders, and flaps help pilots control the aircraft during different phases of flight such as takeoff, cruise, descent, and landing.
The science behind how planes fly
The document discusses the science behind how planes fly. It explains that four main aerodynamic forces - lift, gravity, thrust, and drag - work together to enable flight. Lift is generated by the wings and counteracts gravity. Thrust from the engines overcomes drag. While Bernoulli's principle and Newton's laws both play a role in generating lift, modern research indicates lift requires power to divert air downward which creates an equal reaction upward. The angle of attack and design of the wings are also important for maintaining proper lift. Pilots control various surfaces like the ailerons, elevators, rudder, and flaps to maneuver the plane during flight.
How does a plane fly
This document discusses how planes fly through aerodynamic forces. It explains that thrust produced by engines propels the plane forward, while lift forces generated by the wings when air passes over and under them allow the plane to gain altitude and remain airborne. The document also covers the different axes of motion for a plane and how control surfaces like elevators, rudders, and ailerons allow pilots to control pitching, yawing, and rolling movements. Finally, it provides specifications for the Airbus A380 and Dassault Rafale to illustrate different types of modern aircraft.
Principles of flight_chapter_6
Helicopters generate both lift and thrust using rotor blades that spin around a central axis, rather than fixed wings. Pilots control the lift and direction of travel through the collective pitch and cyclic pitch controls, which respectively alter the angle of the rotor blades to increase lift or tilt the disc in the desired direction of thrust. The torque reaction from the spinning rotor is counteracted by a tail rotor that pushes the fuselage in the opposite direction to prevent it from spinning, and pilots can control yaw using the tail rotor pitch.
Airfoil
The document provides information about aerodynamics and the four main forces that act on airplanes - lift, weight, thrust, and drag. It explains how the shape of an airfoil generates lift using both Bernoulli's principle of fluid dynamics and Newton's third law of equal and opposite reactions. However, it notes that neither theory fully explains lift and some aspects of each theory have flaws. It also discusses other factors that influence lift such as angle of attack.
Aerodynamic design of aeroplane
The document discusses the aerodynamic design of airplanes. It describes key design features like wings, which generate lift perpendicular to the wind to oppose the force of gravity. Other parts that help control movement include the horizontal and vertical stabilizers, rudder for left/right control, and elevators for up/down control. The main body is the fuselage, which holds all other parts like the wings, tail, engine, and passenger area. Propulsion comes from turbine engines mounted on the wings. The cockpit is at the front of the fuselage for the pilots.
Avb 2: Aerodynamics - CCPL G. Fleming
This document provides an overview of aerodynamic concepts including:
1) It defines key parts of an airfoil like chord, camber, leading edge, and trailing edge.
2) It explains forces like lift, weight, thrust, and drag and how they relate to flight.
3) It describes factors that affect lift like air density, wing area, angle of attack, and Bernoulli's principle.
Flight power point
This document discusses the key concepts of flight, including two types - gliding which requires no power, and true flight which uses a power source like an engine. It defines important aerodynamic terms like thrust, which pushes an object forward, airfoils which use curved wing shapes to produce lift, angle of attack which is the wing angle relative to airflow, and Bernoulli's principle about pressure changes with speed. Lift and drag are also summarized, with lift created by air moving over wings and drag from air friction, while weight is the force of gravity on a body. Fuselage and tail assembly are also briefly mentioned.
Unit 1 Basic Aerodynamics ATPP 200
The document discusses the four forces of flight - lift, weight, thrust, and drag. It explains that lift is produced by the interaction of air moving over an airfoil shape according to Bernoulli's principle. The angle of attack and airspeed determine the amount of lift generated. For steady level flight, the opposing forces of lift and weight and of thrust and drag must balance. Induced drag is caused by lift and increases with higher angles of attack needed for slower flight. Exceeding the critical angle of attack causes a stall from airflow separation over the wing.
Flight Basics
The document summarizes the four main forces that act on an aircraft in flight - lift, thrust, gravity, and drag. It explains how lift is generated by the wing's airfoil shape and angle of attack, how thrust provides forward momentum, how drag creates resistance, and how gravity affects G-forces. It also describes the primary control surfaces - ailerons, elevators, rudder, and flaps - and how they control the aircraft's roll, pitch, and yaw.
Basic aerodynamics
This document provides an overview of basic aerodynamic principles and aircraft flight theory. It covers key topics such as the atmosphere, Newton's laws of motion, Bernoulli's principle, airfoils, the four forces of flight, stability and control surfaces. The presentation introduces fundamental concepts including pressure, density, humidity, inertia, lift, drag, thrust, weight, angles of attack and incidence, and the three axes of movement. It also explains how stability is achieved through aircraft design elements like dihedral wings, sweepback, and keel effect.
Principles of flight_chapter_1
Lift is generated when air flows over an airfoil such as a wing. The air traveling over the top of the wing must move faster than the air on the bottom, lowering the air pressure above and raising it below, which creates an upward force called lift. Several factors affect the amount of lift generated, including airspeed, angle of attack, air density, and wing shape and area. For an aircraft to fly, the lift must equal or exceed the aircraft's weight to allow it to climb, remain level, or descend depending on the balance between lift and weight.
Shoebox Design Challenge No Extras
This document discusses the principles of flight for gliders. It explains that gliders have no powered thrust, typically have long wing spans, and are built to reduce drag. It then covers how gliders can control their mass, wing placement and angle to maximize lift and reduce drag. The key principle explained is Bernoulli's principle, where the faster moving air over the curved top of the wing results in lower pressure, creating lift. The document provides examples of testing drag through wind tunnels and fluid dynamics labs.
Introduction to flight 1
The document provides an overview of an introductory aeronautics course, including:
- Course details like instructor, textbook, term work and exams
- Topics covered across two terms like history of flight, aerodynamics, airfoils, and aircraft performance and stability
- A brief history of the development of flight from early attempts to imitate birds to modern airplanes
- Descriptions of key aircraft components like the fuselage, wings, tail assembly, landing gear, and power plants
Why airplanes fly aerodynamics
The document presents information on the aerodynamics of airplanes. It discusses the four main forces of flight - weight, lift, thrust, and drag. It explains that the motion of the airplane depends on the balance of these forces. It also provides details on how lift is generated, discussing Newton's laws of motion, Bernoulli's principle, air velocity and pressure differences, and how the wing shape contributes to creating lift. The document uses diagrams to illustrate these concepts.
Basics of airplanes
Nomenclature and classification of controls in an airplane (slide # 3-4).
Which are the aerodynamic forces acting on airplane (slide # 5).
Working principle of an airplane (slide # 6).
How an airplane flies (basic motions of an airplane) (slide # 7).
How controls play their roles in these motions (slide # 8-22).
Simulate a flight in Cessna Skyhawk (slide # 23-28).
References and Questions & answers (slide # 30).
Aerodynamics slide
This document discusses the basics of aerodynamics and the forces acting on aircraft in flight. It covers key concepts like:
1. Aerodynamic forces like lift, weight, thrust and drag that act on aircraft in motion through the air based on Newton's Laws of motion.
2. How the shape of airfoils and wings generate lift using Bernoulli's principle and how control surfaces like ailerons, elevators and rudders allow for rolling, pitching and yawing.
3. The different types of drag forces - induced, parasite and wave drag - and how configuration changes and altitude affect aircraft performance.
Basic Aerodynamics To Stability
The document discusses the basics of aerodynamics, including the atmosphere, airfoils, and forces acting on aircraft in flight. It describes standard day conditions for pressure, temperature, and density. It explains how airfoils generate lift through Bernoulli's principle and Newton's laws. Forces like lift, weight, thrust, and drag are defined as vectors, and how aircraft maintain equilibrium in straight and level flight.
Basic Aerodynamics and Flight Controls
This document provides an overview of basic aerodynamics and flight controls. It explains the four main forces that act on aircraft - lift, gravity/weight, thrust, and drag. It describes how control surfaces like the ailerons, elevators, and rudder are used to control the aircraft's roll, pitch, and yaw. Finally, it gives a brief tour of common flight instruments that provide information to pilots like airspeed, altitude, heading, and vertical speed. The goal is to help readers understand how aircraft fly and how pilots control and navigate them.
Lift of a wing
Lift is an aerodynamic force produced by the motion of an airplane's wing through the air. According to Bernoulli's principle, lift is generated because the airflow is faster and the pressure is lower over the curved top surface of the wing compared to the bottom. However, this explanation is flawed because a wing would still produce lift even if upside down. The correct explanation is that the wing exerts a downward force on the air and the air exerts an equal and opposite upward force on the wing according to Newton's Third Law of Motion.
Praveen
This document discusses aerodynamics in airplanes and cars. It explains that aerodynamics is the study of forces generated by moving air on objects in motion. For airplanes, the four main forces acting are lift, weight, thrust, and drag. Lift counters weight to allow flight, and thrust must exceed drag for an airplane to accelerate or maintain speed. The document also discusses aerodynamic devices like wings, elevators, ailerons, and rudders that control an airplane's pitch, roll, and yaw. For cars, better aerodynamics can improve speed and fuel efficiency by reducing drag. Features like spoilers, ducts, vehicle shape, and rear/front design are described for their aerod
7th Grade Chapter 5 Lesson 3 Slideshare
1. The document discusses properties of air and gas laws including Boyle's law, Charles' law, and the combined gas law.
2. Boyle's law states that if temperature is constant, volume and pressure of a gas are inversely related. Charles' law states that if pressure is constant, volume and temperature of a gas are directly related.
3. The combined gas law incorporates both, stating that if volume is constant, pressure and temperature are directly related. Air pressure and how it is measured is also discussed.
8th Grade Chapter 2 Lesson 4
The document discusses how the Earth's tilt and orbit around the sun cause seasons and affect climates. It explains that the equinoxes occur when the sun's position crosses the celestial equator, and solstices are when the sun is at its maximum distance north or south. The tropics and polar circles define different climate zones, with temperate zones in between. The wobbling of the Earth's axis over 26,000 years is also mentioned. Seasons in each hemisphere are opposite, with more direct sunlight in summer causing warmer weather.
7th Grade Chapter 6 Lesson 3
Local winds are caused by differences in air pressure due to uneven heating of land and water surfaces. During the day, sea breezes and valley breezes blow in from cooler waters or valleys to replace rising warm air above heated land or mountain surfaces. At night, land and mountains cool faster than water or valleys, so mountain breezes and katabatic winds blow down from elevated areas. Foehn and chinook winds are gusty winds caused by warm, dry air descending on the leeward side of mountains after being cooled and dried on the windward side.
More Related Content
What's hot
How does a plane fly
This document discusses how planes fly through aerodynamic forces. It explains that thrust produced by engines propels the plane forward, while lift forces generated by the wings when air passes over and under them allow the plane to gain altitude and remain airborne. The document also covers the different axes of motion for a plane and how control surfaces like elevators, rudders, and ailerons allow pilots to control pitching, yawing, and rolling movements. Finally, it provides specifications for the Airbus A380 and Dassault Rafale to illustrate different types of modern aircraft.
Principles of flight_chapter_6
Helicopters generate both lift and thrust using rotor blades that spin around a central axis, rather than fixed wings. Pilots control the lift and direction of travel through the collective pitch and cyclic pitch controls, which respectively alter the angle of the rotor blades to increase lift or tilt the disc in the desired direction of thrust. The torque reaction from the spinning rotor is counteracted by a tail rotor that pushes the fuselage in the opposite direction to prevent it from spinning, and pilots can control yaw using the tail rotor pitch.
Airfoil
The document provides information about aerodynamics and the four main forces that act on airplanes - lift, weight, thrust, and drag. It explains how the shape of an airfoil generates lift using both Bernoulli's principle of fluid dynamics and Newton's third law of equal and opposite reactions. However, it notes that neither theory fully explains lift and some aspects of each theory have flaws. It also discusses other factors that influence lift such as angle of attack.
Aerodynamic design of aeroplane
The document discusses the aerodynamic design of airplanes. It describes key design features like wings, which generate lift perpendicular to the wind to oppose the force of gravity. Other parts that help control movement include the horizontal and vertical stabilizers, rudder for left/right control, and elevators for up/down control. The main body is the fuselage, which holds all other parts like the wings, tail, engine, and passenger area. Propulsion comes from turbine engines mounted on the wings. The cockpit is at the front of the fuselage for the pilots.
Avb 2: Aerodynamics - CCPL G. Fleming
This document provides an overview of aerodynamic concepts including:
1) It defines key parts of an airfoil like chord, camber, leading edge, and trailing edge.
2) It explains forces like lift, weight, thrust, and drag and how they relate to flight.
3) It describes factors that affect lift like air density, wing area, angle of attack, and Bernoulli's principle.
Flight power point
This document discusses the key concepts of flight, including two types - gliding which requires no power, and true flight which uses a power source like an engine. It defines important aerodynamic terms like thrust, which pushes an object forward, airfoils which use curved wing shapes to produce lift, angle of attack which is the wing angle relative to airflow, and Bernoulli's principle about pressure changes with speed. Lift and drag are also summarized, with lift created by air moving over wings and drag from air friction, while weight is the force of gravity on a body. Fuselage and tail assembly are also briefly mentioned.
Unit 1 Basic Aerodynamics ATPP 200
The document discusses the four forces of flight - lift, weight, thrust, and drag. It explains that lift is produced by the interaction of air moving over an airfoil shape according to Bernoulli's principle. The angle of attack and airspeed determine the amount of lift generated. For steady level flight, the opposing forces of lift and weight and of thrust and drag must balance. Induced drag is caused by lift and increases with higher angles of attack needed for slower flight. Exceeding the critical angle of attack causes a stall from airflow separation over the wing.
Flight Basics
The document summarizes the four main forces that act on an aircraft in flight - lift, thrust, gravity, and drag. It explains how lift is generated by the wing's airfoil shape and angle of attack, how thrust provides forward momentum, how drag creates resistance, and how gravity affects G-forces. It also describes the primary control surfaces - ailerons, elevators, rudder, and flaps - and how they control the aircraft's roll, pitch, and yaw.
Basic aerodynamics
This document provides an overview of basic aerodynamic principles and aircraft flight theory. It covers key topics such as the atmosphere, Newton's laws of motion, Bernoulli's principle, airfoils, the four forces of flight, stability and control surfaces. The presentation introduces fundamental concepts including pressure, density, humidity, inertia, lift, drag, thrust, weight, angles of attack and incidence, and the three axes of movement. It also explains how stability is achieved through aircraft design elements like dihedral wings, sweepback, and keel effect.
Principles of flight_chapter_1
Lift is generated when air flows over an airfoil such as a wing. The air traveling over the top of the wing must move faster than the air on the bottom, lowering the air pressure above and raising it below, which creates an upward force called lift. Several factors affect the amount of lift generated, including airspeed, angle of attack, air density, and wing shape and area. For an aircraft to fly, the lift must equal or exceed the aircraft's weight to allow it to climb, remain level, or descend depending on the balance between lift and weight.
Shoebox Design Challenge No Extras
This document discusses the principles of flight for gliders. It explains that gliders have no powered thrust, typically have long wing spans, and are built to reduce drag. It then covers how gliders can control their mass, wing placement and angle to maximize lift and reduce drag. The key principle explained is Bernoulli's principle, where the faster moving air over the curved top of the wing results in lower pressure, creating lift. The document provides examples of testing drag through wind tunnels and fluid dynamics labs.
Introduction to flight 1
The document provides an overview of an introductory aeronautics course, including:
- Course details like instructor, textbook, term work and exams
- Topics covered across two terms like history of flight, aerodynamics, airfoils, and aircraft performance and stability
- A brief history of the development of flight from early attempts to imitate birds to modern airplanes
- Descriptions of key aircraft components like the fuselage, wings, tail assembly, landing gear, and power plants
Why airplanes fly aerodynamics
The document presents information on the aerodynamics of airplanes. It discusses the four main forces of flight - weight, lift, thrust, and drag. It explains that the motion of the airplane depends on the balance of these forces. It also provides details on how lift is generated, discussing Newton's laws of motion, Bernoulli's principle, air velocity and pressure differences, and how the wing shape contributes to creating lift. The document uses diagrams to illustrate these concepts.
Basics of airplanes
Nomenclature and classification of controls in an airplane (slide # 3-4).
Which are the aerodynamic forces acting on airplane (slide # 5).
Working principle of an airplane (slide # 6).
How an airplane flies (basic motions of an airplane) (slide # 7).
How controls play their roles in these motions (slide # 8-22).
Simulate a flight in Cessna Skyhawk (slide # 23-28).
References and Questions & answers (slide # 30).
Aerodynamics slide
This document discusses the basics of aerodynamics and the forces acting on aircraft in flight. It covers key concepts like:
1. Aerodynamic forces like lift, weight, thrust and drag that act on aircraft in motion through the air based on Newton's Laws of motion.
2. How the shape of airfoils and wings generate lift using Bernoulli's principle and how control surfaces like ailerons, elevators and rudders allow for rolling, pitching and yawing.
3. The different types of drag forces - induced, parasite and wave drag - and how configuration changes and altitude affect aircraft performance.
Basic Aerodynamics To Stability
The document discusses the basics of aerodynamics, including the atmosphere, airfoils, and forces acting on aircraft in flight. It describes standard day conditions for pressure, temperature, and density. It explains how airfoils generate lift through Bernoulli's principle and Newton's laws. Forces like lift, weight, thrust, and drag are defined as vectors, and how aircraft maintain equilibrium in straight and level flight.
Basic Aerodynamics and Flight Controls
This document provides an overview of basic aerodynamics and flight controls. It explains the four main forces that act on aircraft - lift, gravity/weight, thrust, and drag. It describes how control surfaces like the ailerons, elevators, and rudder are used to control the aircraft's roll, pitch, and yaw. Finally, it gives a brief tour of common flight instruments that provide information to pilots like airspeed, altitude, heading, and vertical speed. The goal is to help readers understand how aircraft fly and how pilots control and navigate them.
Lift of a wing
Lift is an aerodynamic force produced by the motion of an airplane's wing through the air. According to Bernoulli's principle, lift is generated because the airflow is faster and the pressure is lower over the curved top surface of the wing compared to the bottom. However, this explanation is flawed because a wing would still produce lift even if upside down. The correct explanation is that the wing exerts a downward force on the air and the air exerts an equal and opposite upward force on the wing according to Newton's Third Law of Motion.
Praveen
This document discusses aerodynamics in airplanes and cars. It explains that aerodynamics is the study of forces generated by moving air on objects in motion. For airplanes, the four main forces acting are lift, weight, thrust, and drag. Lift counters weight to allow flight, and thrust must exceed drag for an airplane to accelerate or maintain speed. The document also discusses aerodynamic devices like wings, elevators, ailerons, and rudders that control an airplane's pitch, roll, and yaw. For cars, better aerodynamics can improve speed and fuel efficiency by reducing drag. Features like spoilers, ducts, vehicle shape, and rear/front design are described for their aerod
What's hot (19)
Viewers also liked
7th Grade Chapter 5 Lesson 3 Slideshare
1. The document discusses properties of air and gas laws including Boyle's law, Charles' law, and the combined gas law.
2. Boyle's law states that if temperature is constant, volume and pressure of a gas are inversely related. Charles' law states that if pressure is constant, volume and temperature of a gas are directly related.
3. The combined gas law incorporates both, stating that if volume is constant, pressure and temperature are directly related. Air pressure and how it is measured is also discussed.
8th Grade Chapter 2 Lesson 4
The document discusses how the Earth's tilt and orbit around the sun cause seasons and affect climates. It explains that the equinoxes occur when the sun's position crosses the celestial equator, and solstices are when the sun is at its maximum distance north or south. The tropics and polar circles define different climate zones, with temperate zones in between. The wobbling of the Earth's axis over 26,000 years is also mentioned. Seasons in each hemisphere are opposite, with more direct sunlight in summer causing warmer weather.
7th Grade Chapter 6 Lesson 3
Local winds are caused by differences in air pressure due to uneven heating of land and water surfaces. During the day, sea breezes and valley breezes blow in from cooler waters or valleys to replace rising warm air above heated land or mountain surfaces. At night, land and mountains cool faster than water or valleys, so mountain breezes and katabatic winds blow down from elevated areas. Foehn and chinook winds are gusty winds caused by warm, dry air descending on the leeward side of mountains after being cooled and dried on the windward side.
8th Grade Chapter 6 Lesson 4
This document summarizes different types of bird behaviors including:
- Bird singing which is produced by the syrinx and causes air and walls to vibrate, creating short characteristic calls.
- Visual communication through displays like head bobbing, tail flicking, crest raising, wing positioning.
- Avian actions like bathing, anting, mobbing predators, faking injuries to distract predators, and different types of migration along flyways using senses of direction and landmarks.
7th Grade Chapter 6 Lesson 5
The document discusses the formation of clouds and weather patterns. It explains that the sun causes temperature differences and evaporation of water which leads to winds, humidity, and cloud formation. Clouds form when water vapor condenses on tiny particles in the air. The type of clouds that form depends on whether the rising air cools more slowly or rapidly than the surrounding air. Certain cloud patterns in the morning can help predict the weather for the day.
9th Grade Chapter 9 Lesson 1
Minerals are inorganic crystalline substances that are found naturally in the Earth. Mineralogy is the study of minerals, which are the building blocks of soil and vital to industry. Minerals are not mixtures but rather elements or compounds with a definite chemical structure. The most common elements in minerals are oxygen, silicon, and aluminum. There are different types of minerals including native elements, halides, sulfides, oxides, carbonates, and silicates. Minerals form crystals with geometric patterns that can be used to identify different minerals based on properties like color, streak, luster, hardness, cleavage, and acid testing. Valuable minerals can be mined for uses like metals, concrete, jewelry, and works of
Physics M3 Gas Laws
The document provides an introduction to gas laws including Boyle's law, Charles' law, the pressure law, and the combined gas law. It includes objectives, demonstrations, examples, graphs, and a quiz. The key points covered are:
- Boyle's law states that the pressure and volume of a gas are inversely proportional at constant temperature.
- Charles' law states that the volume of a gas is directly proportional to its temperature when pressure remains constant.
- The pressure law states that the pressure of a gas is directly proportional to its temperature at constant volume.
- The combined gas law relates the pressure, volume, and temperature of a gas, stating their product over temperature is a constant.
Viewers also liked (7)
Similar to 8th Grade Chapter 4 Lesson 5
Aviation history
This document provides an overview of the key components and principles of aircraft flight. It discusses Newton's laws of motion, Bernoulli's principle, the major parts of an airplane including the fuselage, wings, empennage, and powerplant. It describes the primary control surfaces - ailerons, elevators, and rudder - and how they control the roll, pitch, and yaw of an airplane. The document aims to explain the basic scientific principles that allow airplanes to fly and be controlled through the air.
Aircraft wing
it's all about the aircraft wings,wings type,parts of the wing and their functions and some description about aerofoil...............
Parts of an aircraft
The document defines and explains the basic components of a typical aircraft, including:
- The fuselage, which contains the crew and payload.
- The wing, which produces lift and is made of two halves connected by the fuselage.
- The engine, which can be piston-driven or jet-powered.
- Horizontal and vertical stabilizers, which provide stability and are made of airfoil cross-sections.
It also describes basic control surfaces like the elevator, rudder, and ailerons, and additional components such as flaps, the cockpit/cabin, landing gear, and trim tabs.
Principle of Avation ppt
This document provides an overview of aviation principles. It discusses the history of flight from early concepts like kites to the Wright Brothers' first powered flight. It describes different types of aircraft as well as key flight control surfaces like wings, fins, and elevators. It also examines jet planes in detail, explaining components like the fan, compressor, combustor, turbine, and nozzle. Finally, it covers principles like Bernoulli's principle, different jet engine types, thrust, Mach number, and efficiency.
31oct
The document summarizes the key components and control surfaces of an aircraft. It describes the major structural components including the fuselage, wings, empennage, control surfaces, and landing gear. It explains the four main forces acting on an aircraft - thrust, lift, weight, and drag. It details the basic control surfaces including the elevator, rudder, and ailerons. It also discusses additional components such as flaps, cabins, and cockpits.
AEROPLANES CREATING LIFT BY GIRISH HARMUKH
The document provides an overview of airplanes, including their history, key concepts and principles of flight. It discusses the four main forces acting on a plane - weight, lift, drag and thrust. It explains how lift is generated through two perspectives: Bernoulli's principle involving pressure differences, and Newton's view involving momentum transfer between the air and wing. Factors affecting lift such as airspeed, density and wing shape are also covered.
FLYING IS FUN
Flying is fun according to the document. It discusses how over 100,000 people in the US each year learn to fly small aircraft for reasons like recreation, business, and as a stepping stone to a career in piloting. The document also provides basic information on how airplanes fly, describing the four main forces of lift, gravity, thrust, and drag. It outlines the basic parts of an airplane like the wings, tail, landing gear, and control surfaces that allow pilots to direct the aircraft.
Fixed wing aircrafts power point presentation
This document provides information on different types of aircraft. It discusses the main categories of aircraft as being aerostats and aerodynes, with aerostats being lighter than air and aerodynes being heavier than air. It then describes various types of fixed wing aircraft, including those classified by number of wings (monoplane, biplane, triplane), wing position (low wing, mid wing, high wing), wing shape, tail configuration, and motion. It also discusses aerodynamic forces, control surfaces like flaps, ailerons, and elevators, as well as components like the fuselage and aerofoils. In summary, the document categorizes and describes different types of aircraft based on factors like
Lecture 1 Aircraft Classification.ppt
The document discusses aircraft classification and components. It defines fluids, dynamics, and aerodynamics. There are two kinds of aircraft - lighter than air (such as airships and balloons) and heavier than air (like airplanes, helicopters, gliders). Heavier than air aircraft can be fixed wing or rotary wing. The basic components of aircraft include the fuselage, wings, tail assembly, landing gear, and power plant. The wings produce lift, and the rudder controls left and right turns. The horizontal stabilizer controls the aircraft's nose up and down.
Aircraft mechanical cable control system
This document describes aircraft flight control systems. It discusses the primary flight controls of elevators, ailerons, and rudders and how each control affects the aircraft's pitch, roll, and yaw. Secondary flight controls include trim tabs for stabilizing the elevators, ailerons, and rudder. Auxiliary controls are flaps and high-lift devices that increase an aircraft's lift during takeoff and landing. Flaps extend on the trailing edge of wings to increase their camber and reduce stall speed, while leading edge slats and spoilers disrupt airflow over wings.
Why airplanes fly aerodynamics
The document presents information on the aerodynamics of airplanes. It discusses the four main forces of flight - weight, lift, thrust, and drag. It explains that the motion of the airplane depends on the balance of these forces. It also provides details on how lift is generated, discussing Newton's laws of motion, Bernoulli's principle, pressure differences, and how the shape of the wing contributes to creating lift. Diagrams are included showing air flow patterns over wings at different angles of attack.
Flying Circuits
A presentation that guides the student through the forces acting on an aircraft, and how to fly a circuit at a typical airfield. This includes aircraft instrumentation and radio use. THIS PRESENTATION IS FOR INTEREST AND SIMULATED FLIGHT ONLY, AS PROPER FLIGHT INSTRUCTION SHOULD BE TAKEN FOR ACTUAL FLIGHT
video 1
Bernoulli's principle states that for an inviscid flow, an increase in the speed of the fluid occurs simultaneously with a decrease in pressure or a decrease in the fluid's potential energy. The document then provides an explanation of how Bernoulli's principle causes airplanes to fly, noting that the curved top of a wing causes faster moving air which decreases pressure above the wing, creating lift. It includes diagrams of wing cross-sections and experiments demonstrating the principle using paper or ping pong balls.
Aeromodelling Instruction manual
The document provides information about designing and building radio controlled model airplanes. It describes the main parts of an RC airplane like the fuselage, wings, tail, engine and propeller. It explains how control surfaces like ailerons, elevators and rudders control the roll, pitch and yaw of the plane. The document also gives an overview of basic aerodynamic forces on planes like lift, drag, thrust and weight. It provides guidance on selecting materials and constructing the wings and tail of a model plane. Finally, it defines important electronics and terminology used for radio controlled flight.
Airplanes types and basic principles.ppt
Airplanes fly due to four main aerodynamic forces: thrust, which propels the plane forward and overcomes drag; lift, which is generated by the wings and counteracts the downward force of weight. In straight and level flight, thrust equals drag and lift equals weight. The wings generate lift through faster air flow over the top surface, creating lower pressure that effectively "sucks" the plane upward. Additional control surfaces like the horizontal and vertical stabilizers, rudder, ailerons and elevators help control the plane's movement.
by shubham on Basicaircraftcontrolsystem
Primary, secondary, and auxiliary flight control systems work together to control an aircraft. Primary systems include the elevator, aileron, and rudder control surfaces and their respective control mechanisms. Secondary systems such as trim tabs help adjust for forces on the primary controls. Auxiliary systems include flaps and other high-lift devices that allow for slower takeoff and landing speeds. Together these integrated systems provide pilots with the control necessary to safely operate aircraft.
Basic Principles of Flight.pptx
The document discusses the basic principles of flight, including the four main forces acting on an airplane (lift, weight, thrust, drag), how flight controls like the elevator, ailerons, and rudder work to control the aircraft, aerodynamic concepts like Bernoulli's principle and how wings and propellers generate lift and thrust, the basics of take-off, flight, and landing, and maneuvers, turns and circuit patterns. It provides explanations of these fundamental aspects of flight to build knowledge for pilots.
Presentation (1) (1).pptx
1. The document discusses different types of propellers used on aircraft, including fixed pitch propellers, constant speed propellers, and ground-adjustable propellers.
2. It also describes the three main movements of aircraft - roll, pitch, and yaw. Roll is controlled by ailerons and causes the aircraft to tilt left or right. Pitch is controlled by the elevator and tilts the nose up or down. Yaw is controlled by the rudder and causes rotation around the vertical axis.
3. Maintaining control requires coordinating the ailerons, elevator, and rudder to control roll, pitch, and yaw respectively and enable turning of the aircraft.
Aircraft Wing
This document provides an overview of aircraft wings, including their:
- Historical development from ancient kites to the Wright brothers' fixed-wing aircraft.
- Construction, with internal structures like ribs, spars, stringers, and skin covering the framework. Wings also contain fuel tanks, flaps, and other devices.
- Functions, as wings generate lift through Bernoulli's principle and critical angle of attack. Wing design factors like aspect ratio and camber also affect lift.
- Types based on position (fixed or movable) and structure (cantilever or strut-braced). Stability devices like ailerons and flaps are also described.
- Unconventional designs that
The complex and dynamic theory of flight
The document discusses the complex principles of flight from a physics perspective. It covers Bernoulli's principle of fluid dynamics that explains lift. Additional concepts covered include thrust, drag, gravity, lift, turbulence, and how environmental factors like temperature and thunderstorms affect flight. The document emphasizes that flight involves balancing many forces through aerodynamic design and engineering that harnesses principles of physics.
Similar to 8th Grade Chapter 4 Lesson 5 (20)
More from MRS.KDUNCAN
7th Grade Chapter 6 Lesson 4
Global winds are caused by the uneven heating of the Earth's surface by the sun. This causes air to move from areas of high pressure to low pressure. There are three main wind zones: the tropical zone near the equator dominated by trade winds, the temperate zone between 30-60 degrees dominated by westerlies, and the polar zone above 60 degrees dominated by easterlies. Within these zones, the Coriolis effect causes winds in the Northern Hemisphere to curve right and winds in the Southern Hemisphere to curve left.
8th Grade Chapter 6 Lesson 3
To identify birds, an ornithologist must observe their behaviors, physical features, habitats, and nests. The document outlines 5 steps for bird identification: 1) Determine if the bird lives on land or water, 2) Study the bird's habitat, 3) Examine characteristics of its nest, 4) Consider its size and shape, and 5) Analyze details of its bill such as length, width, and structure to determine if it eats plants or other animals. Close observation of many physical attributes is needed to properly identify each type of bird.
7th Grade Chapter 6 Lesson 2
The document discusses the causes of seasons and differences between weather and climate. It explains that the Earth's axis is tilted at 23.5 degrees and this tilt causes the seasons as the northern and southern hemispheres lean towards the sun at different times of the year. It also describes how the length of daylight varies throughout the year depending on proximity to the equator and poles.
7th Grade Chapter 6 Lesson 1
Weather is defined as the atmospheric conditions at a specific time and place, and is created through the interaction of heat, air, and water vapor. Climate refers to the year-round weather patterns of a region. Meteorology is the study of weather, and meteorologists predict weather by analyzing patterns and understanding how heat, air, and water vapor interact in the atmosphere.
7th Grade Chapter 6 Lesson 3
Local winds are caused by differences in air pressure due to uneven heating of land and water surfaces. During the day, sea breezes and valley breezes blow in from cooler water or valley areas to replace rising warm air over land or mountains. At night, land and mountains cool faster than water or valleys, so mountain breezes and katabatic winds blow from elevated areas down to warmer lower elevations. Foehn and chinook winds are gusty winds caused by warm air rising over one side of mountains and warm, dry air descending on the other side.
8th Grade Chapter 6 Lesson 1
Birds have lightweight skeletons with strong, hollow bones that allow for powerful wing muscles to attach. Their bills are toothless and made of keratin, and their heads are thin and flat. Their powerful pectoral muscles in their chest compose 33% of their weight and are used to raise and lower their wings. This low center of gravity gives birds stability in flight. Birds have strong, four-chambered hearts and efficient respiratory and digestive systems adapted for flight. Their senses, such as sharp eyesight and hearing, help birds navigate and find food.
9th Grade Chapter 8 Lesson 2
The document summarizes key information about earthquakes, including their causes, types of waves produced, how they are measured, typical locations, and damage potential. Earthquakes are caused by the sudden movement of tectonic plates and release elastic energy that was built up in the Earth's crust. They produce different types of waves - P, S, and surface waves - that can be measured by seismographs to determine the earthquake's epicenter and focus. While occurring globally, most earthquakes are concentrated in narrow zones surrounding the Pacific Ocean and Mediterranean Sea. Their intensity is rated using scales like Mercalli and Richter, with more powerful quakes causing greater damage to structures.
9th Grade Chapter 8 Lesson 3
This document provides an overview of volcanoes including their structure, types, activity levels, locations, eruptions, ejecta, and other features. It defines key volcanic terms like vent, magma, cone, and crater. It describes the three main types of volcanoes as cinder cones, shield volcanoes, and composite volcanoes. It also outlines the three main volcanic belts around the world and notes some other locations of volcanoes. The document explains the signs of an impending eruption and describes how eruptions can range from violent to gentle depending on lava viscosity and gas content.
9th Grade Chapter 8 Lesson 1
This document provides a summary of key concepts in geology:
1) Geology is the study of the Earth, including its structure, features, earthquakes, volcanoes, erosion, and fossils.
2) The Earth is composed of three main layers - the crust, mantle, and core. The crust is the outer layer and exists in both continental and oceanic forms.
3) The mantle lies below the crust and is composed mostly of oxygen, silicon, iron, and magnesium. It can be divided into upper, transition, and lower zones.
9th Grade Chapter 7 Lesson 3
The document provides an overview of biochemistry and the key components of cells. It discusses the four main compounds that make up cells - carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates like glucose are used for energy, lipids include fats and oils, proteins perform important functions and are made of amino acids, and nucleic acids DNA and RNA control cell activities and inheritance. The document also describes important cell structures like mitochondria and the nucleus, as well as metabolic processes like cellular respiration.
9th Grade Chapter 7 Lesson 2
Organic chemistry is the study of carbon-containing compounds, especially those found in living things. Carbon is uniquely suited to form many different compounds due to its ability to form multiple bonds, including single, double, and triple bonds. Hydrocarbons are organic compounds made of carbon and hydrogen, and can be classified based on their bonding as alkanes, alkenes, or alkynes. Substituted hydrocarbons have one or more hydrogen atoms replaced by other functional groups such as alcohols, carboxylic acids, or esters.
8th Grade Chapter 5 Lesson 4
The document discusses the three states of matter - solid, liquid, and gas - and the changes between them due to heat. It explains phase changes like melting, freezing, evaporation, boiling, and condensation. Melting and freezing occur at specific temperatures called melting and freezing points. Evaporation turns liquid to gas, while condensation turns gas back to liquid. Boiling is evaporation from within the liquid. Pressure affects boiling point by controlling evaporation. Refrigeration uses evaporation and condensation of gases to transfer heat.
7th Grade Chapter 5 Lesson 5
The document discusses the water cycle and the transportation of water around the world. It explains that water makes up 60-70% of the human body and is essential for life. It also describes how water moves from the sky to the ground, collecting in rivers, lakes, and underground sources, before evaporating again into the atmosphere to repeat the cycle. Fresh water sources include glaciers, groundwater aquifers, and surface water features like lakes and rivers.
7th Grade Chapter 5 Lesson 4
Wind is caused by differences in air temperature across the Earth's surface. Heat from the sun is absorbed differently by various surfaces, with darker surfaces absorbing more. This causes uneven heating of land and water. There are three key differences in how land and water heat up: 1) Water is transparent while land is solid, 2) Land is solid while water can flow and circulate, 3) Water has a higher heat capacity than land and absorbs heat more slowly. These differences impact wind patterns and weather.
8th Grade Chapter 5 Lesson 3
The document summarizes the first and second laws of thermodynamics. The first law states that energy cannot be created or destroyed, and heat can be converted to work and vice versa. The second law states that heat flows spontaneously from hot to cold bodies, and entropy, or disorder, increases over time as energy is dissipated.
8th Grade Chapter 5 Lesson 2
Heat can be transferred between objects in three ways: conduction, convection, and radiation. Conduction involves direct contact between objects, convection involves the transfer of heat by a fluid like air or water, and radiation transfers heat through electromagnetic waves without a medium. Materials expand when heated as the molecules move farther apart, requiring expansion joints in bridges to allow for expansion and contraction with changes in temperature. Thermostats also use bimetallic strips that expand at different rates to sense temperature changes and regulate heating and cooling systems.
7th Grade Chapter 5 Lesson 2
The document is a 7th grade science lesson about waves and the atmosphere. It contains:
1) Information about the parts of waves like crests, troughs, wavelength and frequency.
2) Details about different types of electromagnetic waves like infrared, radio waves, microwaves, ultraviolet rays, x-rays and gamma rays.
3) Facts about how the atmosphere protects life from radiation by absorbing, reflecting or stopping types of waves from the sun.
9th Grade Chapter 7 Lesson 1
The document discusses chemical reactions, including definitions, examples of reactions shown in pictures, how to write chemical equations, and factors that affect the rate of reactions. It defines a chemical reaction as when molecules combine or break apart through collisions, outlines how to balance chemical equations by adjusting coefficients, and explains that temperature, concentration, surface area, and catalysts can impact the speed of reactions.
8th Grade Chapter 5 Lesson 1
Thermal energy refers to the internal energy of an object due to the random motion of its molecules. All objects possess thermal energy. Thermal energy can be transferred from objects at higher temperatures to objects at lower temperatures through heat. The rate of heat transfer depends on factors like the temperature difference between objects, their mass and specific heat. Higher temperatures correspond to higher molecular kinetic energies and motion. Different temperature scales are used to measure the temperature of various materials and contexts.
9th Grade Chapter 6 Lesson 3
The document discusses intermolecular forces and properties of solids and liquids. It describes three categories of intermolecular forces - dipolar forces, London forces, and hydrogen bonds. It also discusses how intermolecular structure determines the arrangement of molecules in crystalline and amorphous solids. The document defines terms like melting point, boiling point, vapor pressure, solubility, solvent, and solute.
More from MRS.KDUNCAN (20)
Recently uploaded
Demystifying Knowledge Management through Storytelling
The Department of Veteran Affairs (VA) invited Taylor Paschal, Knowledge & Information Management Consultant at Enterprise Knowledge, to speak at a Knowledge Management Lunch and Learn hosted on June 12, 2024. All Office of Administration staff were invited to attend and received professional development credit for participating in the voluntary event.
The objectives of the Lunch and Learn presentation were to:
- Review what KM ‘is’ and ‘isn’t’
- Understand the value of KM and the benefits of engaging
- Define and reflect on your “what’s in it for me?”
- Share actionable ways you can participate in Knowledge - - Capture & Transfer
Essentials of Automations: Exploring Attributes & Automation Parameters
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks creates AI-boosted business software that helps employees work more efficiently and effectively. Managing data across multiple RDBMS and NoSQL databases was already a challenge at their current scale. To prepare for 10X growth, they knew it was time to rethink their database strategy. Learn how they architected a solution that would simplify scaling while keeping costs under control.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
AppSec PNW: Android and iOS Application Security with MobSF
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Day 2 - Intro to UiPath Studio Fundamentals
In our second session, we shall learn all about the main features and fundamentals of UiPath Studio that enable us to use the building blocks for any automation project.
📕 Detailed agenda:
Variables and Datatypes
Workflow Layouts
Arguments
Control Flows and Loops
Conditional Statements
💻 Extra training through UiPath Academy:
Variables, Constants, and Arguments in Studio
Control Flow in Studio
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
These are the slides for the presentation, "Component Testing: Bridging the gap between frontend applications" that was presented at QA or the Highway 2024 in Columbus, OH by Zachary Hamm.
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
This is a session that details how PostgreSQL's features and Azure AI Services can be effectively used to significantly enhance the search functionality in any application.
In this session, we'll share insights on how we used PostgreSQL to facilitate precise searches across multiple fields in our mobile application. The techniques include using LIKE and ILIKE operators and integrating a trigram-based search to handle potential misspellings, thereby increasing the search accuracy.
We'll also discuss how the azure_ai extension on PostgreSQL databases in Azure and Azure AI Services were utilized to create vectors from user input, a feature beneficial when users wish to find specific items based on text prompts. While our application's case study involves a drug search, the techniques and principles shared in this session can be adapted to improve search functionality in a wide range of applications. Join us to learn how PostgreSQL and Azure AI can be harnessed to enhance your application's search capability.
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
How we managed to grow and scale a RAG application from zero to thousands of users in 7 months. Lessons from technical challenges around managing high load for LLMs, RAGs and Vector databases.
Recently uploaded (20)
Demystifying Knowledge Management through Storytelling
Demystifying Knowledge Management through Storytelling
Essentials of Automations: Exploring Attributes & Automation Parameters
Essentials of Automations: Exploring Attributes & Automation Parameters
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
Freshworks Rethinks NoSQL for Rapid Scaling & Cost-Efficiency
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
AppSec PNW: Android and iOS Application Security with MobSF
AppSec PNW: Android and iOS Application Security with MobSF
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
QA or the Highway - Component Testing: Bridging the gap between frontend appl...
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
Northern Engraving | Modern Metal Trim, Nameplates and Appliance Panels
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"NATO Hackathon Winner: AI-Powered Drug Search", Taras Kloba
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
"Scaling RAG Applications to serve millions of users", Kevin Goedecke
8th Grade Chapter 4 Lesson 5
- 1. 8 th Grade Chapter 4 Lesson 5 Pgs. 165-175 For Student Use Only
- 7. Match the term with the definition Lift Drag Weight Thrust Streamlining Shaping objects for easy flow of fluids Force that pushes plane forward Force exerted by air that slows plane Force of gravity The upward force resulting from difference
- 8. Match the term with the definition Pitch Roll Center of Gravity Yaw Help golf balls fly better Rudder controls this left or right motion Ailerons control the planes upside down or right side up The balance point of the plane The elevators control the up or down motion Dimples