306 - Lesson 4 - Industry Production
•Download as PPTX, PDF•
0 likes•616 views
This document discusses the key elements of comic book production including design, layout, and cost implications. It outlines the production process from writing to printing and mentions jobs involved like writers, artists, editors, and printers. The goal is to research standard industry techniques and investigate how production has changed with digital comics and may continue to change in the future.
Report
Share
Report
Share
Recommended
Unit 206 - Lesson 3 - Software
The document discusses software used in the comic book production process. It identifies key jobs in comic book production that may require software, such as writing, drawing, coloring, and printing. It then discusses specific software used for writing comics, such as Microsoft Word and Final Draft, and for illustrating comics, such as Adobe Photoshop, Adobe Illustrator, and Manga Studio. The document task is to identify software packages that could help create a comic book and packages that allow creating a comic strip from start to finish.
Bengkel Gamelan : Pixel Art Best Practices by Wisageni Studio
Bengkel Gamelan : Pixel Art Best Practices by Wisageni Studio
1. £1 challenge
The document discusses the "10,000 hours rule" which suggests that it takes roughly 10,000 hours of practice, equivalent to 3 hours per day for 10 years, to achieve true mastery in a field. Studies of experts in various domains such as music, sports, writing and more have found this number to be consistent. No cases have been found where world-class expertise was achieved in less time, suggesting it takes the brain this long to fully develop the necessary skills and knowledge through practice.
Digital Design And Studio Art
This document outlines digital and studio art projects including digital paintings transformed into digital patterns, graphic design posters, altered photography, and digitally drawn characters and backgrounds for animation. Studio art projects involve paper design, sculpture, hand-carved prints, and pen and ink design. Wearable art and photo montage are also listed.
Grokkin’ Design
The document provides an overview of design principles including branding and identity, typography, layout, and color basics. It discusses how brands evolve over time and the key elements of branding including vision, experience, keywords, and emotional response. Typography principles covered include core web fonts, line length, and vertical rhythm. Layout concepts explained are using grids, the rule of thirds, baseline grids, and composition. The color section outlines the color wheel, tints, shades, tones, and using color moods. Throughout, examples are given and the document emphasizes balance, composition, and testing design work.
SAUX 2009 Presentation
The document provides tips for overcoming a fear of drawing and designing user experiences through sketching. It recommends visually mapping users' stories and designing to match their goals and mental schemas. Tips include stacking drawing sizes to reduce repetition and using different markers for details, actions, and emphasis. The goal is designing the right experience by capturing a user's essence cheaply and quickly, not about making art. Resources for templates, tutorials, and organizations are listed at the end.
Task 2
Photorealism attempts to create paintings that are nearly indistinguishable from photographs. Many photorealist artists can create works that appear real even after multiple looks. The document cites Tomb Raider as an example of a game that uses photorealism to immerse players in the game world. Cel shading is a graphics technique used in animation and video games to give a cartoon-like appearance. It provides benefits like better frame rates and a non-realistic visual style. Abstraction considers something as a general characteristic apart from specifics, which makes it suitable for simple games. Exaggeration, used in games like Halo 4, enlarges elements to create a more engaging experience and reflect expressionism.
Super powers launch
The document outlines a multi-disciplinary project involving English, IT, History, Art, and Design & Technology. Students will explore character development in Macbeth, create a comic strip and stop motion animation, research historical superheroes to inform a collaborative comic book, and make an expressive mask of a Macbeth character using paper sculpting. The objectives are for students to develop self-management, teamwork, reflection, innovation/creativity, and inquiry skills through these creative outcomes.
Recommended
Unit 206 - Lesson 3 - Software
The document discusses software used in the comic book production process. It identifies key jobs in comic book production that may require software, such as writing, drawing, coloring, and printing. It then discusses specific software used for writing comics, such as Microsoft Word and Final Draft, and for illustrating comics, such as Adobe Photoshop, Adobe Illustrator, and Manga Studio. The document task is to identify software packages that could help create a comic book and packages that allow creating a comic strip from start to finish.
Bengkel Gamelan : Pixel Art Best Practices by Wisageni Studio
Bengkel Gamelan : Pixel Art Best Practices by Wisageni Studio
1. £1 challenge
The document discusses the "10,000 hours rule" which suggests that it takes roughly 10,000 hours of practice, equivalent to 3 hours per day for 10 years, to achieve true mastery in a field. Studies of experts in various domains such as music, sports, writing and more have found this number to be consistent. No cases have been found where world-class expertise was achieved in less time, suggesting it takes the brain this long to fully develop the necessary skills and knowledge through practice.
Digital Design And Studio Art
This document outlines digital and studio art projects including digital paintings transformed into digital patterns, graphic design posters, altered photography, and digitally drawn characters and backgrounds for animation. Studio art projects involve paper design, sculpture, hand-carved prints, and pen and ink design. Wearable art and photo montage are also listed.
Grokkin’ Design
The document provides an overview of design principles including branding and identity, typography, layout, and color basics. It discusses how brands evolve over time and the key elements of branding including vision, experience, keywords, and emotional response. Typography principles covered include core web fonts, line length, and vertical rhythm. Layout concepts explained are using grids, the rule of thirds, baseline grids, and composition. The color section outlines the color wheel, tints, shades, tones, and using color moods. Throughout, examples are given and the document emphasizes balance, composition, and testing design work.
SAUX 2009 Presentation
The document provides tips for overcoming a fear of drawing and designing user experiences through sketching. It recommends visually mapping users' stories and designing to match their goals and mental schemas. Tips include stacking drawing sizes to reduce repetition and using different markers for details, actions, and emphasis. The goal is designing the right experience by capturing a user's essence cheaply and quickly, not about making art. Resources for templates, tutorials, and organizations are listed at the end.
Task 2
Photorealism attempts to create paintings that are nearly indistinguishable from photographs. Many photorealist artists can create works that appear real even after multiple looks. The document cites Tomb Raider as an example of a game that uses photorealism to immerse players in the game world. Cel shading is a graphics technique used in animation and video games to give a cartoon-like appearance. It provides benefits like better frame rates and a non-realistic visual style. Abstraction considers something as a general characteristic apart from specifics, which makes it suitable for simple games. Exaggeration, used in games like Halo 4, enlarges elements to create a more engaging experience and reflect expressionism.
Super powers launch
The document outlines a multi-disciplinary project involving English, IT, History, Art, and Design & Technology. Students will explore character development in Macbeth, create a comic strip and stop motion animation, research historical superheroes to inform a collaborative comic book, and make an expressive mask of a Macbeth character using paper sculpting. The objectives are for students to develop self-management, teamwork, reflection, innovation/creativity, and inquiry skills through these creative outcomes.
Quality Inspection In General
1. The quality inspection process involves generating an inspection lot number, recording inspection results, and making a usage decision to complete the inspection lot.
2. Key steps include sample determination, results recording, and updating the inspection lot status with all inspection data.
3. The quality management module provides continuous improvement tools like notification processing to implement tasks, find problems and solutions, and analyze defects and causes.
Industrial Engineering Management E Book
The document discusses the history and evolution of industrial engineering management. It describes how operations research and management techniques developed in the 1960s and were applied to business problems using early computer technology. Through the 1970s-1980s, fields like distribution, logistics, supply chain management, and enterprise resource planning integrated operations research quantitative techniques. The development of computer languages, databases, internet technologies enabled enterprise resource planning software to automate business operations. Modern concepts now focus on cooperation between business partners using information sharing and technologies to reduce costs across the supply chain.
Concept of industrial management
The document discusses various concepts of industrial management including its scope and functions. It describes Taylor's scientific management approach which emphasized science over rules of thumb, harmony over discord between management and labor, and cooperation over individualism. It also covered Fayol's principles of management, McGregor's Theory X and Theory Y about employee motivation, Mayo's Hawthorne experiments on the impact of working conditions, Herzberg's two-factor theory of motivation, and Maslow's hierarchy of human needs.
Introduction to Quality Engineering / Quality Control
Quality Control Introduction,
Definition and concept of quality,
Quality control,
Set up policy and objectives of quality control
Quality of design and quality of conformance
Compromise between quality & cost
Quality cost and planning for quality
Industrial management
This document provides an overview of industrial management. It defines key terms like management, industry, and industrial management. It discusses management as both a science and an art. It also outlines several approaches to management like scientific management pioneered by Taylor which emphasized time and motion studies. The document covers the objectives, functions, importance and scope of industrial management.
L 01- industrial management
Management involves getting work done through people by utilizing resources to achieve objectives. It is the process of creating an environment where individuals and groups can work efficiently to attain goals. Industrial management facilitates the creation of management systems to coordinate operational activities and resources in organizations. It takes a structured approach to manage factory operations. Industrial management applies functions like planning, organizing, and controlling to activities such as production, operations, quality, costs, and maintenance. Approaches to industrial management have evolved from classical to neoclassical to systems-oriented perspectives.
1. introduction to engineering management
The document discusses engineering management. It defines management as getting things done through people by engaging in planning, organizing, directing, and controlling. It outlines the functions of management including planning, organizing, staffing, leading, and controlling. It discusses the evolution of management theories from early contributors like Taylor and Fayol to modern approaches. It also examines managerial roles, styles, and skills needed at different levels of an organization.
Industrial management
Industrial Management, the new subject intorduced in the field of engineering. By looking this pptx. one can gain the overall idea of basics of management and its industrial approach.
Introduction of Industrial Management
The document discusses industrial management fundamentals and provides definitions of key terms. It describes the five levels of industry from primary to quinary and defines management as the process of coordinating activities to achieve goals. The document also outlines the functions of management as planning, organizing, staffing, directing, controlling, coordinating, reporting and budgeting. Finally, it discusses the roles and responsibilities of managers at different levels and areas within organizations.
Tqm
Total Quality Management (TQM) is a management philosophy focused on meeting customer needs and expectations through continuous improvement. It emphasizes employee empowerment and involvement across all departments. The key aspects of TQM include defining customers, both internal and external, focusing on continuous process improvement, using tools like flow charts and control charts, and implementing steps like defining objectives and measuring results.
total quality management (tqm)
Total Quality Management (TQM) is a management approach focused on meeting customer needs through continuous improvement. The document discusses TQM principles like focusing on customer satisfaction, continuous improvement, and teamwork. It outlines Deming's 14 points for TQM implementation and characteristics of successful TQM companies like training employees and using teams for process improvement. Reasons for companies to begin TQM include increased efficiency and motivation. Examples of companies that implemented continuous improvement through TQM are provided.
Industrial Engineering
Industrial engineering is concerned with optimizing complex processes and systems. Industrial engineers work to eliminate waste and improve quality and productivity across various domains. They apply principles of engineering, business, and management science. Some key goals of industrial engineering include developing integrated systems involving people, equipment, and processes, and specifying and evaluating results. Modern industrial engineering utilizes tools like simulation, mathematical modeling, and computational methods to analyze, evaluate, and optimize systems.
Industrial engineering presentation
Industrial engineers determine the most effective ways to use resources like people, machines, materials, and energy to improve business operations and efficiency. They work to make products and services safer, faster, easier, and more profitable through techniques like project management, supply chain optimization, quality control, and financial analysis. The field offers opportunities across many industries as well as consulting, government, healthcare, education, and more.
Inventory Control
Inventory control involves regulating inventory levels according to predetermined norms to reduce costs. It aims to balance ordering, holding, and stockout costs. The ABC analysis technique categorizes inventory into A, B, and C items based on annual consumption value to focus control efforts where they are needed most. VED classification groups items as vital, essential, or desirable based on the criticality of inventory to operations. FSN analysis looks at item movement patterns to identify fast, slow, or non-moving inventory.
Total Quality Management (TQM)
Total Quality Management (TQM) focuses on meeting customer expectations through integrated organizational efforts to improve quality. The key aspects of TQM discussed in the document include: 1) the four dimensions of quality for manufacturing and service organizations, 2) the costs of quality and prevention through tools like QFD and seven problem solving tools, 3) quality awards like the Malcolm Baldrige National Quality Award and Deming Prize that recognize excellence. TQM relies on concepts like continuous improvement, quality at the source, teams, and supplier certification.
Inventory control & management
This document discusses inventory control and management. It defines inventory as physical resources held for sale or transformation, and inventory systems as policies that monitor levels and determine replenishment needs. Reasons for holding inventory include stabilizing production, taking advantage of discounts, and meeting demand during replenishment periods. The objectives of inventory control are to track inventory levels of the right quality and quantity. Costs associated with inventory include purchase, capital, ordering, carrying, and shortage costs. Decisions around inventory planning include determining order quantities and timing.
Quality control and inspection
This document discusses quality control and inspection. It defines quality as fitness for use and outlines why quality control is important. Quality control involves verifying that products meet requirements through planned and systematic actions. Key aspects of quality control covered include pre-production inspection of materials, in-process inspection during production, and final inspection of finished products. Statistical quality control techniques like control charts and acceptance sampling are also summarized. The document emphasizes that quality control is essential throughout the production system from raw materials to final outputs.
Production
This document outlines the production task for a GCSE Film class. Students will choose to either produce a poster campaign or magazine feature based on their film pitch. They will go through the production process of researching similar works, identifying codes and conventions, creating paper and digital mockups, and producing a final product. The document also provides examples of typical codes and conventions for film posters and magazines, such as placement of images and text, use of color and typography, and mode of address.
306 - Lesson 5 - Industry Software
The document discusses software used in the comic book industry. It identifies key jobs like writing and illustrating that require software. The goals are to know software for writing like Microsoft Word and illustrating like Adobe Photoshop, and identify key features of these applications. Some software can piece together images, frames, storylines and headlines for comic books.
Unit 306 - Lesson 8 - Storyboard
A storyboard is used to plan a comic book before drawing it. It allows the creator to visualize how the storyline flows through panels and place characters and dialogue. Key elements of a storyboard include panels, speech bubbles, captions, symbols, and sound effects. The lesson teaches about these storyboarding elements and terms. Students are tasked with creating their own original storyboard for a comic book by designing the panel layout, character placement, dialogue, and headings. The storyboard, script, and storyline should all work together to plan out the final comic book.
Digital media.pptx teresa
The document discusses several topics related to digital art and design including:
1) 3D video mapping projection on buildings and web design using Google and WordPress.
2) The origins of giclee printmaking using early inkjet printers and its use in magazine publishing.
3) Computer graphics software used for 3D rendering, fashion design, interior design, and vector graphics.
4) Design for corporate identity, advertising, packaging, and animation of products.
5) Catalogues of art/design work and their evolution from simple lists to "coffee table books".
6) Typography as the art of arranging type to make language visible.
7) Photographic manipulation,
LO1 - Lesson 13 - Feedback
This document provides information about different types of pre-production documents used in media production, including their purpose, use, content, and examples. It instructs students to match each document type with its purpose, use, and typical content. The document types are mood board, mind map, visualization, storyboard, and script. Students are then asked to use feedback on their previous work to improve their understanding and descriptions of these pre-production documents.
More Related Content
Viewers also liked
Quality Inspection In General
1. The quality inspection process involves generating an inspection lot number, recording inspection results, and making a usage decision to complete the inspection lot.
2. Key steps include sample determination, results recording, and updating the inspection lot status with all inspection data.
3. The quality management module provides continuous improvement tools like notification processing to implement tasks, find problems and solutions, and analyze defects and causes.
Industrial Engineering Management E Book
The document discusses the history and evolution of industrial engineering management. It describes how operations research and management techniques developed in the 1960s and were applied to business problems using early computer technology. Through the 1970s-1980s, fields like distribution, logistics, supply chain management, and enterprise resource planning integrated operations research quantitative techniques. The development of computer languages, databases, internet technologies enabled enterprise resource planning software to automate business operations. Modern concepts now focus on cooperation between business partners using information sharing and technologies to reduce costs across the supply chain.
Concept of industrial management
The document discusses various concepts of industrial management including its scope and functions. It describes Taylor's scientific management approach which emphasized science over rules of thumb, harmony over discord between management and labor, and cooperation over individualism. It also covered Fayol's principles of management, McGregor's Theory X and Theory Y about employee motivation, Mayo's Hawthorne experiments on the impact of working conditions, Herzberg's two-factor theory of motivation, and Maslow's hierarchy of human needs.
Introduction to Quality Engineering / Quality Control
Quality Control Introduction,
Definition and concept of quality,
Quality control,
Set up policy and objectives of quality control
Quality of design and quality of conformance
Compromise between quality & cost
Quality cost and planning for quality
Industrial management
This document provides an overview of industrial management. It defines key terms like management, industry, and industrial management. It discusses management as both a science and an art. It also outlines several approaches to management like scientific management pioneered by Taylor which emphasized time and motion studies. The document covers the objectives, functions, importance and scope of industrial management.
L 01- industrial management
Management involves getting work done through people by utilizing resources to achieve objectives. It is the process of creating an environment where individuals and groups can work efficiently to attain goals. Industrial management facilitates the creation of management systems to coordinate operational activities and resources in organizations. It takes a structured approach to manage factory operations. Industrial management applies functions like planning, organizing, and controlling to activities such as production, operations, quality, costs, and maintenance. Approaches to industrial management have evolved from classical to neoclassical to systems-oriented perspectives.
1. introduction to engineering management
The document discusses engineering management. It defines management as getting things done through people by engaging in planning, organizing, directing, and controlling. It outlines the functions of management including planning, organizing, staffing, leading, and controlling. It discusses the evolution of management theories from early contributors like Taylor and Fayol to modern approaches. It also examines managerial roles, styles, and skills needed at different levels of an organization.
Industrial management
Industrial Management, the new subject intorduced in the field of engineering. By looking this pptx. one can gain the overall idea of basics of management and its industrial approach.
Introduction of Industrial Management
The document discusses industrial management fundamentals and provides definitions of key terms. It describes the five levels of industry from primary to quinary and defines management as the process of coordinating activities to achieve goals. The document also outlines the functions of management as planning, organizing, staffing, directing, controlling, coordinating, reporting and budgeting. Finally, it discusses the roles and responsibilities of managers at different levels and areas within organizations.
Tqm
Total Quality Management (TQM) is a management philosophy focused on meeting customer needs and expectations through continuous improvement. It emphasizes employee empowerment and involvement across all departments. The key aspects of TQM include defining customers, both internal and external, focusing on continuous process improvement, using tools like flow charts and control charts, and implementing steps like defining objectives and measuring results.
total quality management (tqm)
Total Quality Management (TQM) is a management approach focused on meeting customer needs through continuous improvement. The document discusses TQM principles like focusing on customer satisfaction, continuous improvement, and teamwork. It outlines Deming's 14 points for TQM implementation and characteristics of successful TQM companies like training employees and using teams for process improvement. Reasons for companies to begin TQM include increased efficiency and motivation. Examples of companies that implemented continuous improvement through TQM are provided.
Industrial Engineering
Industrial engineering is concerned with optimizing complex processes and systems. Industrial engineers work to eliminate waste and improve quality and productivity across various domains. They apply principles of engineering, business, and management science. Some key goals of industrial engineering include developing integrated systems involving people, equipment, and processes, and specifying and evaluating results. Modern industrial engineering utilizes tools like simulation, mathematical modeling, and computational methods to analyze, evaluate, and optimize systems.
Industrial engineering presentation
Industrial engineers determine the most effective ways to use resources like people, machines, materials, and energy to improve business operations and efficiency. They work to make products and services safer, faster, easier, and more profitable through techniques like project management, supply chain optimization, quality control, and financial analysis. The field offers opportunities across many industries as well as consulting, government, healthcare, education, and more.
Inventory Control
Inventory control involves regulating inventory levels according to predetermined norms to reduce costs. It aims to balance ordering, holding, and stockout costs. The ABC analysis technique categorizes inventory into A, B, and C items based on annual consumption value to focus control efforts where they are needed most. VED classification groups items as vital, essential, or desirable based on the criticality of inventory to operations. FSN analysis looks at item movement patterns to identify fast, slow, or non-moving inventory.
Total Quality Management (TQM)
Total Quality Management (TQM) focuses on meeting customer expectations through integrated organizational efforts to improve quality. The key aspects of TQM discussed in the document include: 1) the four dimensions of quality for manufacturing and service organizations, 2) the costs of quality and prevention through tools like QFD and seven problem solving tools, 3) quality awards like the Malcolm Baldrige National Quality Award and Deming Prize that recognize excellence. TQM relies on concepts like continuous improvement, quality at the source, teams, and supplier certification.
Inventory control & management
This document discusses inventory control and management. It defines inventory as physical resources held for sale or transformation, and inventory systems as policies that monitor levels and determine replenishment needs. Reasons for holding inventory include stabilizing production, taking advantage of discounts, and meeting demand during replenishment periods. The objectives of inventory control are to track inventory levels of the right quality and quantity. Costs associated with inventory include purchase, capital, ordering, carrying, and shortage costs. Decisions around inventory planning include determining order quantities and timing.
Quality control and inspection
This document discusses quality control and inspection. It defines quality as fitness for use and outlines why quality control is important. Quality control involves verifying that products meet requirements through planned and systematic actions. Key aspects of quality control covered include pre-production inspection of materials, in-process inspection during production, and final inspection of finished products. Statistical quality control techniques like control charts and acceptance sampling are also summarized. The document emphasizes that quality control is essential throughout the production system from raw materials to final outputs.
Viewers also liked (17)
Introduction to Quality Engineering / Quality Control
Introduction to Quality Engineering / Quality Control
Similar to 306 - Lesson 4 - Industry Production
Production
This document outlines the production task for a GCSE Film class. Students will choose to either produce a poster campaign or magazine feature based on their film pitch. They will go through the production process of researching similar works, identifying codes and conventions, creating paper and digital mockups, and producing a final product. The document also provides examples of typical codes and conventions for film posters and magazines, such as placement of images and text, use of color and typography, and mode of address.
306 - Lesson 5 - Industry Software
The document discusses software used in the comic book industry. It identifies key jobs like writing and illustrating that require software. The goals are to know software for writing like Microsoft Word and illustrating like Adobe Photoshop, and identify key features of these applications. Some software can piece together images, frames, storylines and headlines for comic books.
Unit 306 - Lesson 8 - Storyboard
A storyboard is used to plan a comic book before drawing it. It allows the creator to visualize how the storyline flows through panels and place characters and dialogue. Key elements of a storyboard include panels, speech bubbles, captions, symbols, and sound effects. The lesson teaches about these storyboarding elements and terms. Students are tasked with creating their own original storyboard for a comic book by designing the panel layout, character placement, dialogue, and headings. The storyboard, script, and storyline should all work together to plan out the final comic book.
Digital media.pptx teresa
The document discusses several topics related to digital art and design including:
1) 3D video mapping projection on buildings and web design using Google and WordPress.
2) The origins of giclee printmaking using early inkjet printers and its use in magazine publishing.
3) Computer graphics software used for 3D rendering, fashion design, interior design, and vector graphics.
4) Design for corporate identity, advertising, packaging, and animation of products.
5) Catalogues of art/design work and their evolution from simple lists to "coffee table books".
6) Typography as the art of arranging type to make language visible.
7) Photographic manipulation,
LO1 - Lesson 13 - Feedback
This document provides information about different types of pre-production documents used in media production, including their purpose, use, content, and examples. It instructs students to match each document type with its purpose, use, and typical content. The document types are mood board, mind map, visualization, storyboard, and script. Students are then asked to use feedback on their previous work to improve their understanding and descriptions of these pre-production documents.
The Basement Design + Motion's Animation Process Presentation
The Basement Design + Motion, LLC is a digital design and interactive marketing studio based in Indianapolis, Indiana. They specialize in partnering with agencies to create digital content focusing on experience, engagement, and call to action. Their services include web development, animation and motion graphics, digital design, online games, mobile applications, and digital signage. They were founded in 2007 and have experienced over 950% growth since inception.
Unit 201 - Lesson 8 - Make a Storyboard
This document provides guidance on creating a storyboard and reviewing it against a client brief. It defines key terms like storyboard, audience, purpose and review. The lesson goals are to create an effective storyboard that could be used to plan a movie trailer and to understand how to critically review the storyboard. Learners are instructed to create a storyboard for their movie trailer with sketches, details and dialogue, and then evaluate how well it achieves its intended purpose.
Unit 206 - Lesson 5 - Storyboard
The document discusses creating a storyboard for a comic book. It defines a storyboard as a way to plan a comic strip by visually laying out panels, characters, and dialogue. The lesson goals are to understand why storyboards are used in planning comic books and to create an original storyboard. Students are tasked with making a two-page storyboard for a comic book showing panels, characters, speech, and headings that is suitable for primary students.
Final Storyboards
The document discusses the development of final storyboard formats for a film, animated film, and video game adaptation of a script.
For the film storyboard, hand-drawn sketches were scanned and digitized, allowing for a tidy layout with three shots per page and space for descriptions. The animated film storyboard focused more on visuals than technical details, with room for handwritten notes. The video game flat plan outlined narrative structure and level variables to guide developers.
Through experimenting across mediums, the formats incorporated lessons on efficiency and functionality for their intended use in production.
Ramiro Fauve Portfolio 2012
Art Director/Graphic Designer with a clean, fresh, refined style. Highly creative, self-motivated, accustomed to meeting tight deadlines. Work very well in collaborative environments. Proven track record with theme attractions, agencies, corporations and production companies.
Unit 206 - Lesson 6 - Create Assets
The document discusses planning for creating a comic book. It explains that students should break down the project into smaller tasks, list the resources needed for each stage, and understand potential legal issues. Key areas to consider are copyright, creative commons licensing, permissions for characters, and ownership of the finished work. Planning the timeline and resources required is emphasized.
Game Design
The document summarizes information about the field of game design. It discusses what game designers do, such as making creative decisions. It also outlines the pros and cons of the profession, including dream fulfillment but also worrying about budgets. Finally, it provides tips for becoming a game designer, such as having good communication skills and a critical eye for games.
Big Portfolio Digital
The document discusses various design projects created using Solidworks and AutoCAD software. It summarizes designs like 3D printed chess pieces, an electric violin prototype created through CNC milling, and a vacuum formed shield replica. Other projects discussed include robot skull casts, conceptual designs, and scale models for architectural and environmental purposes.
Unit 34 2
This document discusses techniques for 2D animation production. It introduces bitmap and vector graphics as the two main types of digital images used in 2D animation. Bitmap graphics are composed of pixels and have a fixed resolution, while vector graphics use mathematical formulas to define shapes and can be scaled without quality loss. Students are tasked with researching and explaining the differences between bitmap and vector graphics, and designing bitmap characters for a 2D arcade game using Photoshop.
Comic proposaltemplate
This document outlines the guidelines and requirements for the MSC Malaysia IP Creators Challenge (IPCC) Digital Interactive Comic Competition 2011. Applicants must submit a proposal that includes: [1] a team profile, [2] a comic description and synopsis, [3] character designs and comic samples, [4] a digital comic sample, [5] a production timeline, and [6] implementation team details. The competition aims to fund the creation of original Malaysian comic stories promoting local culture, values and history. Winning teams will receive a grant of RM20,000 to produce their comic over a maximum 6-month period with mentorship support.
Steve Casteels Resume
Steve Casteel has over 16 years of experience in corporate and commercial design. He has worked as an Art Director and Lead Designer for EDMO Distributors, where he designed marketing materials including logos, business cards, magazine ads, catalogs, and product brochures. He is proficient in design software like Photoshop and Illustrator, and has experience with photography, print production, marketing, and freelance design work.
dj
Luann K. Houser provides graphic design, 3D modeling, and fine art services. Her portfolio showcases work in photography, digital media like Photoshop and Maya, and traditional mediums such as oil painting. She has experience with projects including museum exhibits, store designs, product packaging, and brochure layout. Houser invites potential clients to contact her to discuss opportunities for collaboration.
John May Portfolio
John May's document outlines various design projects completed using CAD software like AutoCAD, SolidWorks, and Revit. The projects include assignments creating drawings using dimensions and layers in AutoCAD, a garage plan using external references and overlays, elevation plans for a garage created from roof plans, and a SolidWorks assembly of a drill press bracket from a blueprint. Other projects include designing parts for a radio flyer wagon in SolidWorks, redesigning a bookstore space in Revit, and designing plastic game pieces based on a client's idea. The document demonstrates skills in areas like 3D modeling, blueprint reading, assemblies, and generating drawings for fabrication.
LO1 - Lesson 1 - Introduction
The document provides an introduction to the Cambridge Nationals in Creative iMedia course. It discusses that the course will develop skills using industry standard software like Adobe. It also outlines that students will need to complete four units, including one exam and three coursework units, to pass the course. They will learn about pre-production skills, digital graphics, comic book creation, and game design.
Cm l3
This document discusses storyboarding for pre-production skills. It defines a storyboard as a visual plan for a moving production, scene by scene. Storyboards include timings, camera angles, lighting, setting, location, props, and sounds. The document explains that storyboards allow clear planning, ensure all aspects are considered, and help the creator think from the audience's perspective. It provides instructions on identifying scenes, including relevant details, and reviewing the storyboard. Learners are tasked with creating a storyboard for a 2-minute cartoon teaching counting or road safety aimed at 3-6 year olds.
Similar to 306 - Lesson 4 - Industry Production (20)
The Basement Design + Motion's Animation Process Presentation
The Basement Design + Motion's Animation Process Presentation
More from The English Martyrs School & Sixth Form College
Year 12 parents' information evening 2015
This document provides information from a Year 12 Parents' Information Evening at a sixth form college. It summarizes academic performance data, lists the sixth form staff, explains targets for student achievement, outlines subject choices and timetable changes, and details policies around attendance, learning support, careers guidance, and other opportunities available to students.
UCAS Finance Presentation
This document provides information about student funding for the 2015 academic year and beyond in the UK. It outlines that university tuition fees are up to £9,000 per year, and all students can take out a tuition fee loan. For living costs, students can receive a non-repayable maintenance grant up to £3,387 if their household income is below £25,000, as well as a maintenance loan. Additional funding may be available for disabled students or those studying certain healthcare subjects through the NHS. Student loan repayments are based on income after leaving education, and any outstanding debt is written off after 30 years.
UCAS Parents Information
This document provides information for Year 12 students about applying to university, including:
- Students have over 51,000 course options at over 325 universities and colleges to choose from.
- The school provides preparation and support through discussions, speakers, open days and more to help students with their applications.
- Students must consider factors like location, size, facilities, prestige, and costs when choosing a course and university.
- The UCAS application process and deadlines are outlined, with the main deadlines being 30 September for Oxford/Cambridge/medicine and 31 October for other courses.
LO1 - Lesson 1 - Use of Graphics
This document discusses uses of digital graphics. It outlines lesson goals of understanding where digital graphics are used, their purposes, and analyzing examples. Digital graphics can be used for entertainment, promotion, information, advertising, and education. They are often found in multimedia products. The task is to research and report on how digital graphics are used in the entertainment industry, why they are used there, and analyze examples by describing the graphic's purpose and fit for that purpose.
LO4 - Lesson 4 - Feedback
This document provides guidance on using feedback to improve a game review section. It outlines the key areas of the review to focus on: review, strengths, weaknesses, expected and actual testing outcomes, and immediate and future improvements. The review should evaluate what went well and what didn't for the intended target audience. Testing must validate the game meets requirements and identify any fixes. Suggested improvements should enhance the game. Using feedback from a previous review, the task is to strengthen the review section, testing plan, and proposed improvements.
LO4 - Lesson 3 - Feedback
The document provides guidance on using feedback to improve a game creation section. It outlines the key areas of environment, interaction, and scoring system that must be evidenced. Screenshots and annotations are expected to show how the creator has implemented feedback to enhance their game in these areas. The goal is to understand the needs of the client, know what evidence is expected, and apply feedback to iteratively improve the game.
LO4 - Lesson 2 - Review
This document provides guidance for reviewing and evaluating a game that was created for a client. It outlines the requirements of the client brief, including game features, objectives, and target audience. It also describes how to get feedback on the best and worst parts of the game. The review should identify what worked well, what didn't, and how the game addressed the client brief. Areas for potential improvement should also be discussed.
LO4 - Lesson 1 - Testing
The document outlines the goals, marking criteria, and tasks for a lesson on testing a digital game. The lesson aims to have students understand client requirements, develop a test plan, and test the functionality of a finished game. Students are to create a test plan that tests features of the game like doors, characters, and objectives against expected outcomes, identifying any improvements made.
LO3 - Lesson 6 - Algorithms
This document discusses the importance of providing clear instructions to players of a game and the use of algorithms within games. It defines algorithms as sets of instructions that must be carried out for things to happen in a game. The goals are to understand the need for clear instructions, know what algorithms are used for in games, and be able to create a winnable computer game. The task is to create suitable algorithms in a game to meet requirements and provide evidence of triggers, player actions, and rules to help or challenge the player.
LO3 - Lesson 5 - Popups
This document discusses using media assets in video games. It covers importing media, using media to provide instructions to players, and different types of media that can be used including text, video, audio and speech. Learners are tasked with adding suitable media to their game, such as rules and win screens, and providing evidence of external media assets imported.
LO3 - Lesson 4 - Pickups
This document discusses pickups in computer games. It defines pickups as items that players can collect in a game level. Pickups can have positive or negative impacts on gameplay by increasing or decreasing things like health, points, or time. The document provides examples of pickup properties that can be configured and instructs students to include relevant pickups in their own game, demonstrating both positive and negative pickup impacts.
LO3 - Lesson 3 - Characters
This document discusses characters in video games. It outlines lesson goals of understanding challenge, character customization, and triggers. It describes character properties that can be adjusted like body parts, scale, and resistance. It also lists different character triggers and actions. The task is to add characters to a game, customize their properties, and provide screenshots of the characters, triggers used, and any property changes.
LO3 - Lesson 2 - Door Triggers
This document discusses using triggers in computer games, with a focus on door triggers. It outlines the goals of understanding trigger importance, knowing the available triggers in a chosen software, and being able to use a range of appropriate door triggers. It then discusses the different types of triggers available in Mission Maker software and instructs students to use various triggers to open and close doors, providing screenshots of the trigger types and door properties as evidence.
LO5 - Lesson 26 - Review
This document provides guidance for evaluating a new multi-page website that was created. It lists the goals of understanding client requirements, identifying improvements, and effectively evaluating the website. The evaluation should comment on how well the website fits its purpose, the suitability of content, ease of navigation, and aesthetic quality. It also recommends including details on potential improvements and future plans. Learners are tasked with producing an evaluation that addresses these areas and provides evidence of improvements made based on feedback.
LO4 - Lesson 25 - Testing
This document discusses the importance of testing a website's functionality and producing a suitable test plan. It provides lesson goals and assessment criteria for user testing a website. Key areas to test are interaction and purpose. When creating a test plan, it should show what is being tested, expected results, actual results, and any improvements. Students are tasked with creating a test plan to test functionality of navigation, hyperlinks, page load times, cross-browser performance, and consistency of style, and showing evidence of improvements based on feedback.
LO4 - Lesson 24 - Feedback
This document discusses testing a website and providing constructive feedback. It outlines lesson goals of understanding testing methods, feedback, and conducting target audience user testing. The assessment criteria includes carrying out target audience testing on a website's navigation, hyperlinks, page load times, performance in browsers, and consistency of style. The document emphasizes that feedback should identify strengths and weaknesses, be constructive and respectful, and help others improve their work. Learners are tasked with creating questions to gather feedback from their target audience on these website elements.
LO3 - Lesson 23 - Contact Page
This document provides goals, assessment criteria, and instructions for creating a contact page with a user feedback form. The goals are to understand how to include user feedback, use various form elements, and create a mailto form. The assessment criteria evaluate the technical standard of the website and use of optimization techniques. Learners are instructed to create a contact form with name, contact, and details fields using text boxes, text areas, checkboxes, radio buttons, and buttons. The task is to include a feedback method on the contact page using these form elements and provide evidence in the planning form.
LO3 - Lesson 1 - Level Map
This document provides instructions for creating a level map for a game. It outlines the lesson goals of understanding how to plan and select appropriate assets. The client brief specifies requirements for the game map - it must be suitable for 9-11 year olds and include 1-2 large rooms and small rooms connected by a minimum of 4 doors. Instructions are given to select a theme, locations, doors and props/active props to decorate the map. The task is to create the game map meeting requirements and providing screenshots of locations, props and active props, showing how props are repositioned and resized.
Predict The Score Leaderboard 2014
This document contains the results of a points competition with 211 participants ranked by their total points. Kimberley Bell finished in first place with 71 points and won £50, while D. Campbell and David Holly came second and third with 60 and 58 points winning £30 and £20 respectively. The document provides the full results listing all participants in descending order of points scored and notes that this is the final update, with winners to be contacted and prizes paid out after a deadline for contesting scores.
LO2 - Lesson 8 - Feedback
This document provides guidance on using feedback to improve initial game design ideas for a lesson. It discusses including key features in the game like rooms, doors, characters and objectives. It also covers planning areas like storyline, objectives, style and assets. The document recommends representing pathways using a key to identify room types and pickup locations. Students are instructed to use feedback on their previous game document to improve ideas for storyline, objectives, style, characters, assets, scoring and include evidence of a pathway.
More from The English Martyrs School & Sixth Form College (20)
Recently uploaded
Educational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneJemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
How to Predict Vendor Bill Product in Odoo 17
This slide will guide us through the process of predicting vendor bill products based on previous purchases from the vendor in Odoo 17.
Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher, Director of Education and Skills at the OECD presents at the launch of PISA 2022 Volume III - Creative Minds, Creative Schools on 18 June 2024.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
How Barcodes Can Be Leveraged Within Odoo 17
In this presentation, we will explore how barcodes can be leveraged within Odoo 17 to streamline our manufacturing processes. We will cover the configuration steps, how to utilize barcodes in different manufacturing scenarios, and the overall benefits of implementing this technology.
Recently uploaded (20)
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
spot a liar (Haiqa 146).pptx Technical writhing and presentation skills
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Andreas Schleicher presents PISA 2022 Volume III - Creative Thinking - 18 Jun...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
NEWSPAPERS - QUESTION 1 - REVISION POWERPOINT.pptx
306 - Lesson 4 - Industry Production
- 2. Lesson Goals Research standard industry comic book production techniques. Investigate three key elements of design, layout and cost implications. #comicbook #design #industry #layout
- 3. Key Words Comic Strip A sequence of drawings in boxes that tell a story in each frame. Comic Book A collection of comic strips in one publication Layout The way in which the frames and storyline are arranged across pages Design Process of gathering ideas and planning the final comic book
- 4. Who is involved in Comic Book Design? Think about specific jobs…
- 5. Know industry production techniques Process Investigate layout, design and cost Writing Storyline produced Break up across pages Script for each scene Drawing Sketch each scene Editor reviews scenes Ink scenes & dialogue Colouring Four colour separation Background applied Foreground added Printing Pages arranged Printing Plates Comics Cut to Size #comicbook #design #industry #layout
- 6. Know industry production techniques Your Task Investigate layout, design and cost Explain the production process mentioning the layout, design and cost. Think about: Writing Drawing Colouring Printing Comment on how production has already changed and how it may in future e.g. Digital Comics #comicbook #design #industry #layout
Editor's Notes
- Useful: http://www.madehow.com/Volume-6/Comic-Book.html