GE Webinar: Oxygen Measurement for Chemical & Fuel Storage SafetyTranscat
This webinar will explore:
-The parameters needed for an explosion or fire to occur
-Identifying "Lower Explosive Limit"
-Measuring oxygen concentration using Thermoparamagnetic Oxygen sensors
-Application considerations and case studies
Lifeloc EASYCAL Automatic Calibration Brochure for Workplace Breath TestersLifeloc Technologies
In DOT and Workplace Evidential Breath Testing, EASYCAL® improves productivity and compliance in the field, clinic or office. Required monthly or event based calibration checks are performed properly and promptly every time. Simplified operations mean fewer chances for error, less risk of compliance issues and higher client and employee satisfaction.
Wireless Flow Temperature Sensor Calibration John Gibbs
A look at a recent time sensitive project requiring a non-invasive, temperature sensor solution to provided the means of calibrating the flowing temperature of the production flow in the system during the remaining life of the oil field.
Fluke Calibration on How to Calibrate an RTD Using a Dry block Calibrator Web...Transcat
What is covered:
1. Dry-block sources of error
2. Calculating uncertainties
3. How to calibrate probes with odd shapes and sizes
4. Temperature range concerns
5. Liquid-in-glass thermometers
6. RTD calibration example
7. Dry-block maintenance
Offshore Europe Technology Zone Presentation John Gibbs
Event on 5-8th September 2017 in Aberdeen discussing 'Big Data at Low' cost whist also introducing the Seatooth Pipelogger, Seatoth SwiCOM and Seatooth Lightrope ...
Industrial Temperature Calibration Selection Guide by Fluke CalibrationFluke Calibration
The Industrial Temperature Calibration Selection Guide includes information on:
Field metrology wells
Infrared calibrators
Handheld and field dry-wells
Micro-baths
Environmental monitoring
Thermometer readouts
Reference sensors Industrial temperature calibration selection guide Tools
GE Webinar: Oxygen Measurement for Chemical & Fuel Storage SafetyTranscat
This webinar will explore:
-The parameters needed for an explosion or fire to occur
-Identifying "Lower Explosive Limit"
-Measuring oxygen concentration using Thermoparamagnetic Oxygen sensors
-Application considerations and case studies
Lifeloc EASYCAL Automatic Calibration Brochure for Workplace Breath TestersLifeloc Technologies
In DOT and Workplace Evidential Breath Testing, EASYCAL® improves productivity and compliance in the field, clinic or office. Required monthly or event based calibration checks are performed properly and promptly every time. Simplified operations mean fewer chances for error, less risk of compliance issues and higher client and employee satisfaction.
Wireless Flow Temperature Sensor Calibration John Gibbs
A look at a recent time sensitive project requiring a non-invasive, temperature sensor solution to provided the means of calibrating the flowing temperature of the production flow in the system during the remaining life of the oil field.
Fluke Calibration on How to Calibrate an RTD Using a Dry block Calibrator Web...Transcat
What is covered:
1. Dry-block sources of error
2. Calculating uncertainties
3. How to calibrate probes with odd shapes and sizes
4. Temperature range concerns
5. Liquid-in-glass thermometers
6. RTD calibration example
7. Dry-block maintenance
Offshore Europe Technology Zone Presentation John Gibbs
Event on 5-8th September 2017 in Aberdeen discussing 'Big Data at Low' cost whist also introducing the Seatooth Pipelogger, Seatoth SwiCOM and Seatooth Lightrope ...
Industrial Temperature Calibration Selection Guide by Fluke CalibrationFluke Calibration
The Industrial Temperature Calibration Selection Guide includes information on:
Field metrology wells
Infrared calibrators
Handheld and field dry-wells
Micro-baths
Environmental monitoring
Thermometer readouts
Reference sensors Industrial temperature calibration selection guide Tools
PSC brings to India simple gas detector devices that does not need calibration or charge. Gas Clip Technologies developed innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency. Businesses count on these units every day to accurately test for combustible gases, hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2). Our products are designed to withstand the harshest, toughest industries, including oil and gas, utilities, waste water treatment, telecommunications, and marine, among others.
How to Calibrate an RTD Using a Dry Block Calibrator v2Transcat
Transcat and Ron Ainsworth of Fluke Calibration detail the steps and considerations necessary for the calibration of an RTD with a Dry Block Calibrator.
A presentation on how to select the right temperature/RH data logger to meet your particular needs - from Scott Ellis, Product Marketing Specialist with Onset Computer Corporation, maker of HOBO data loggers.
How to Maintain Your Temperature Calibration Equipment WebinarTranscat
In this informative webinar with Fluke Calibration you will learn tips for keeping your calibration baths and temperature calibrators operating at their peak.
You’ve invested a lot of money in your temperature calibration lab. Preventative maintenance is critical to keeping your calibration baths and temperature calibrators running at their best. A few minutes spent now in maintaining your equipment can also save you costly repairs and downtime later.
Reducing costs through subsea wireless automation June 2017John Gibbs
This presentation explores the latest subsea wireless products and automation technologies including hybrid wireless, Subsea Internet of Things and Subsea Cloud Computing and their use to increase production, reduce operating costs, reduce asset integrity management costs and extend asset life.
How to Calibrate an IR Thermometer Webinar Presented by Fluke CalibrationTranscat
How do you know that your infrared calibrations are accurate?
Topics discussed will include:
-Sources of uncertainty
-Calibration equipment required
-Overview of the calibration procedure
-Review of a sample uncertainty budget
-Recommendations for reporting results
Vasthi Engineers are most popular Manufacturing industries in india. we are Supplying Dew Point Meters, Gas Analyzers and Gas Detectors for customer world wide.
For more details visit->http://www.vasthi.com/gas-analyzers/
Meet the demanding needs of high-purity water measurements and high-acid cation exchange applications with the Thermo Scientific™ Orion™ 2111XP Sodium Analyzer. This system offers unmatched reliability in analyzing critical sample streams throughout the power/steam generation and industrial water industry. It is an all-in-one system from one of the most trusted names in sodium monitoring.
ICE NAVIGATOR DETECTION AND NAVIGATION SYSTEMEdgeLab
The sigma S6 Ice Navigator™ Ice Detection and
Navigation system enables ships operating in ice to
differentiate between open water, ice pans, leads in ice
fields and the thicker ice ridges that impact operations
in ice zones.
Presentation for the 2014 Transportation Law Workshop looks at the way vehicle and customer information is being collected by toll highway and other transportation authorities through methods that include: (i) electronic toll collection; (ii) automated license plate readers; (iii) roadway cameras; and (iv) vehicle "black boxes." Presentation suggests that transportation lawyers will have to become experts in privacy issues because transportation agencies will be privy to massive amounts of roadway user trip data and other such information. Toll highways have a head start because these have been collecting payment information and trip data from their customers for over a decade. Their experience will help inform how transportation agencies will deal with the increasing amounts of data generated and shared by connected vehicles.
PSC brings to India simple gas detector devices that does not need calibration or charge. Gas Clip Technologies developed innovative portable gas detectors that offer greater reliability, improved productivity, and better cost-efficiency. Businesses count on these units every day to accurately test for combustible gases, hydrogen sulfide (H2S), carbon monoxide (CO), and oxygen (O2). Our products are designed to withstand the harshest, toughest industries, including oil and gas, utilities, waste water treatment, telecommunications, and marine, among others.
How to Calibrate an RTD Using a Dry Block Calibrator v2Transcat
Transcat and Ron Ainsworth of Fluke Calibration detail the steps and considerations necessary for the calibration of an RTD with a Dry Block Calibrator.
A presentation on how to select the right temperature/RH data logger to meet your particular needs - from Scott Ellis, Product Marketing Specialist with Onset Computer Corporation, maker of HOBO data loggers.
How to Maintain Your Temperature Calibration Equipment WebinarTranscat
In this informative webinar with Fluke Calibration you will learn tips for keeping your calibration baths and temperature calibrators operating at their peak.
You’ve invested a lot of money in your temperature calibration lab. Preventative maintenance is critical to keeping your calibration baths and temperature calibrators running at their best. A few minutes spent now in maintaining your equipment can also save you costly repairs and downtime later.
Reducing costs through subsea wireless automation June 2017John Gibbs
This presentation explores the latest subsea wireless products and automation technologies including hybrid wireless, Subsea Internet of Things and Subsea Cloud Computing and their use to increase production, reduce operating costs, reduce asset integrity management costs and extend asset life.
How to Calibrate an IR Thermometer Webinar Presented by Fluke CalibrationTranscat
How do you know that your infrared calibrations are accurate?
Topics discussed will include:
-Sources of uncertainty
-Calibration equipment required
-Overview of the calibration procedure
-Review of a sample uncertainty budget
-Recommendations for reporting results
Vasthi Engineers are most popular Manufacturing industries in india. we are Supplying Dew Point Meters, Gas Analyzers and Gas Detectors for customer world wide.
For more details visit->http://www.vasthi.com/gas-analyzers/
Meet the demanding needs of high-purity water measurements and high-acid cation exchange applications with the Thermo Scientific™ Orion™ 2111XP Sodium Analyzer. This system offers unmatched reliability in analyzing critical sample streams throughout the power/steam generation and industrial water industry. It is an all-in-one system from one of the most trusted names in sodium monitoring.
ICE NAVIGATOR DETECTION AND NAVIGATION SYSTEMEdgeLab
The sigma S6 Ice Navigator™ Ice Detection and
Navigation system enables ships operating in ice to
differentiate between open water, ice pans, leads in ice
fields and the thicker ice ridges that impact operations
in ice zones.
Presentation for the 2014 Transportation Law Workshop looks at the way vehicle and customer information is being collected by toll highway and other transportation authorities through methods that include: (i) electronic toll collection; (ii) automated license plate readers; (iii) roadway cameras; and (iv) vehicle "black boxes." Presentation suggests that transportation lawyers will have to become experts in privacy issues because transportation agencies will be privy to massive amounts of roadway user trip data and other such information. Toll highways have a head start because these have been collecting payment information and trip data from their customers for over a decade. Their experience will help inform how transportation agencies will deal with the increasing amounts of data generated and shared by connected vehicles.
Braking the Connected Car: The Future of Vehicle VulnerabilitiesPriyanka Aash
In this presentation, analysts from Kelley Blue Book’s Automotive Industry Insights will illustrate how the connected car is quickly becoming an unrestricted playground for cyberthreats and how the next generation of in-car technology will intensify already-present vehicle vulnerabilities.
(Source: RSA USA 2016-San Francisco)
As the connected vehicle landscape continues to mature, automakers need to adapt. Recognizing this opportunity requires insights that extend beyond traditional automotive boundaries. Booz Allen Hamilton Commercial Solutions guides the automotive industry to act decisively and think forward, from product cybersecurity to data analytics.
Subsea pipelines the remotely welded retrofit tee for hot tap applications ...Neil Woodward
Over the last 10 years Statoil has developed subsea remote hot tap technology. The first use of the remote hot tap technology was the Tampen Link hot tap in 2008. The hot tap cutting operation itself was performed without the use of divers; however, the preparatory works including hyperbaric welding of the hot tap tee was performed with saturation divers. The world’s deepest hot tap operations on a pressurized pipeline were performed on the Ormen Lange field in the Norwegian Sea in August 2009. Two Hot Taps were conducted in a water depth of 860 meters on pre-installed tees. The development of the Pipeline Repair System Remote Hot Tap equipment is the result of targeted research and development effort and extensive qualification work over many years. The Retrofit Tee remote installation, welding and cutting equipment has now been employed as part of a production installation: the Åsgard Subsea Compression project to extend the Åsgard gas-field lifetime.
This paper describes the dry hyperbaric GMA weld procedure development and qualification performed in the laboratory, using the Corrosion Resistant Alloy consumable filler material Alloy 59, for the Remote Hot Tapping application using the Retrofit Tee. Specific attention was paid to areas of concern prior to performing the formal Weld Procedure Qualification work, particularly with regard to the effects of moisture and temperature upon the resultant weld quality. Weld procedures developed in the laboratory were successfully tested subsea in representative environments using the Remote Tee Welding Tool (RTWT) equipment in the Sognefjord, Norway, with offshore tests performed at 265 and 350msw in 2011. Further tests were performed in 2012 at 265msw and in the Retrofit Tee itself at 316msw in the Nedstrandfjord.
The hyperbaric GMA weld procedures have now been applied for the production application for the Åsgard Subsea Compression project, with the installation of a Retrofit Tee, associated valve module and gooseneck spool to enable a cost-effective modification to the existing pipeline network without interfering with ongoing production. The Retrofit Tee will be connected with a Subsea Compressor station to extend the gas-field lifetime.
This milestone represents the world’s first application of diverless dry hyperbaric GMA welding for a subsea production application.
IMPROVEMENT OF PRODUCTIVITY AND QUALITY IN THE WIND ENERGY INDUSTRY THROUGH THE USE OF AN ADVANCED SENSOR SYSTEM , presented at SAMPE-Europe Conference 2017,
Stuttgart, November 15th 2017
Icing of wind power: A survey of research efforts and needsWinterwind
Presentation by René Cattin, Meteotest at Winterwind 2012, workshop "Where do we go from here?". "Icing of wind power: A survey of research efforts and needs"
WindLogger and WindTracker are Logic Energy products, designed in Scotland and manufactured in the UK.
We have already sold over 10000 units worldwide.
This informative tutorial by industry leading Armtec will provide an introduction to Stormwater treatment and the large number of regulations present in Canada. The tutorial will present a range of products to meet various Stormwater treatment regulations and will provide guidance on proper selection and sizing of the products, which is a key question in the development of many projects. Learn how to achieve greener projects through effective particle removal, water retention and infiltration. Stormwater detention will be addressed during the tutorial.
A range of products and application cases will be covered including the VortSentry, Vortechs and StormFilter units and ChamberMaxx stormwater detention/infiltration products.
Coiled tubing is a unique fluid and tool conveyance means used to intervene throughout the entire well lifetime. Its flexibility of use is certainly one of the largest in the oil-and-gas industry, ranging from logging to stimulation to cleanout and even drilling. However, for the longest time, it was only seen as a rudimentary fluid conveyance system, despite its capability to service any well deviation.
With the development of instrumented tools for downhole point measurements and the use of fiber optics for distributed sensing, the recent advent of coiled tubing real-time monitoring has completely transformed this image. The access to live wellbore information—such as pressure, temperature, or flow—along with accurate depth control thanks to casing collar locator and gamma ray sensors have greatly enhanced fluid placement. Meanwhile, the ability to monitor the load, torque, and accelerations the bottomhole assembly is subjected to significantly improves the performance and possibility to use and manipulate downhole tools. Thanks to real-time monitoring, a whole new realm of optimization possibility was discovered.
This lecture describes the various real-time measurements that are available today during coiled tubing interventions and how they can be used to provide the industry with faster, safer, and more efficient operations while maximizing return on investment. A wide range of applications and examples will be discussed. Through them, one will be able to appreciate how coiled tubing has now entered a new era where the limits of operational optimization still have not been reached.
The need to protect workers from diesel particulate matter (DPM) has led the underground coal mining industry to install disposable filter systems on their vehicles. While the disposable filters are efficient at removing significant DPM some major issues have arisen. ACARP, the Australian Coal Association Research Program funded two projects to research and develop solutions to these issues. This presentation provides the key findings from ACARP project C26070.
Definition and Objectives of Lyophilization, Advantages & Disadvantages, Basic Principles of Lyophilization, Steps of Lyophilization,
Main Components of Lyophilizer,
Qualification of Lyophilizer,
Development of Lyophilization cycle, Defects of Lyophilizer.
Similar to The need for ice detection standards Jarkko Latonen, Labkotec (20)
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Personal Brand Statement:
As an Army veteran dedicated to lifelong learning, I bring a disciplined, strategic mindset to my pursuits. I am constantly expanding my knowledge to innovate and lead effectively. My journey is driven by a commitment to excellence, and to make a meaningful impact in the world.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The need for ice detection standards Jarkko Latonen, Labkotec
1. The Need for Ice Detection
Standards
By Mr Jarkko Latonen, Labkotec
in collaboration with VTT
Abstract and poster presentation at Winterwind 2012
2. Ice Detection is Needed in Wind Turbines
• To detect when ice build-up starts
• To prevent dangerous ice-throw
• To prevent energy loss
• To protect the wind turbine
3. How to ensure that ice detection works?
There should be
• certification rules
• standards and
• published best practices
for icing or ice detection tests
4. Labkotec’s Pre-Certification process
for LID-3300IP Ice Detector
Labkotec wanted to
• Ensure that LID-3300IP meets
standards demanded by modern
wind energy operators and
• Express the need for standards
5. Neutral Third Party for Testing
• Selected partner VTT, Technical Research
Centre of Finland due to extensive know-how in
icing and ice detection
6. Evaluation Method Development
• In-house methods developed by VTT
• Based on ice detection time in
“standard” icing conditions
• Pre-certification process to be the
precursor to the formal Ice Detection
Standard
7. Test Methods
• Tests conducted in VTT’s icing wind
tunnel, which fulfils the standard icing
conditions
• Time calculated from icing conditions start
to detector alarm
• Simultaneously the ice build-up on blades
was calculated
9. Calculation Methods
• Ice accretion calculations on wind turbine
blades were conducted with TURBICE
software
• Ice mass and thickness on blades were
calculated and measured when LID-
3300IP ice detector gave an alarm
11. Test Results
• LID-3300IP gave an ice alarm in average in 45
min after icy conditions started
• Ice mass on blades at alarm point 18 kg
• Ice thickness at alarm point
– Up to 1,3 cm at 85% radius
– Average ice thickness 1 cm
– Ice formed only on leading edge
• No large variations between the tests
12. Conclusions
• There is reliable link between LID-
3300IP alarm and ice build-up on
wind turbine blades
• It’s feasible to create common
standard and certification rules for
ice detection
13. Recommendations
• The ice detection standards should be created
• Common agreement on “standard” icy
conditions and best practices
• Helps wind turbine industry in ice detector
selection without time consuming and weather
dependent tests