In this slideshare presentation we discuss ISO 45001 and where it is at.
The following topics are covered:
Where is ISO 45001 up to?
ISO 45001 draft International Standard
Key differences - AS/NZS 4801
Key differences - OHSAS 18001
What you need to do to prepare for ISO 45001.
If you are wanting to implement ISO 45001 then we recommend watching the webinar recording:
http://www.mangolive.com/blog-mango/iso45001-how-to-implement-webinar-recording
Why Audit? What Is the Difference Between Regulatory Auditing and ISO 14001 o...Triumvirate Environmental
We hear about the importance of conducting audits of your facilities. They allow us to be prepared for when the regulators show up. However, have you ever considered obtaining an ISO certification? The two standards that focus solely on EH&S are the ISO 14001 Environmental Management Standard or the ISO 45001 Occupations Health and Safety Standard. This session will cover the importance of auditing, what the ISO standards entail, and how they may actually help you with compliance and to show your end users that you care about your employees' health and safety and the environment.
ISO 14001 is the international standard for environmental management systems (EMS) and the most widely used EMS in the world, with over 14,000 organizations certified in the UK and over 360,000 ISO 14001 certificates issued globally.
ISO 14001 is the principal management system standard which specifies the requirements for the formulation and maintenance of an EMS. This helps to control your environmental aspects, reduce impacts and ensure legal compliance.
This implementation guide will help you run through the benefits, PDCA Cycle and Annex SL structure in detail for implementing ISO 14001.
Find out more or get a quote for ISO 14001 certification here – https://www.nqa.com/en-gb/certification/standards/iso-14001
In this slideshare presentation we discuss ISO 45001 and where it is at.
The following topics are covered:
Where is ISO 45001 up to?
ISO 45001 draft International Standard
Key differences - AS/NZS 4801
Key differences - OHSAS 18001
What you need to do to prepare for ISO 45001.
If you are wanting to implement ISO 45001 then we recommend watching the webinar recording:
http://www.mangolive.com/blog-mango/iso45001-how-to-implement-webinar-recording
Why Audit? What Is the Difference Between Regulatory Auditing and ISO 14001 o...Triumvirate Environmental
We hear about the importance of conducting audits of your facilities. They allow us to be prepared for when the regulators show up. However, have you ever considered obtaining an ISO certification? The two standards that focus solely on EH&S are the ISO 14001 Environmental Management Standard or the ISO 45001 Occupations Health and Safety Standard. This session will cover the importance of auditing, what the ISO standards entail, and how they may actually help you with compliance and to show your end users that you care about your employees' health and safety and the environment.
ISO 14001 is the international standard for environmental management systems (EMS) and the most widely used EMS in the world, with over 14,000 organizations certified in the UK and over 360,000 ISO 14001 certificates issued globally.
ISO 14001 is the principal management system standard which specifies the requirements for the formulation and maintenance of an EMS. This helps to control your environmental aspects, reduce impacts and ensure legal compliance.
This implementation guide will help you run through the benefits, PDCA Cycle and Annex SL structure in detail for implementing ISO 14001.
Find out more or get a quote for ISO 14001 certification here – https://www.nqa.com/en-gb/certification/standards/iso-14001
42 pages editable MS Word document with detailed explanations, auditor tips and recommendations - our ISO 45001 Audit checklist can be utilized in a number of ways. The ISO 45001:2018 Audit checklist:
- provides a complete understanding of how to verify compliance with the requirements of all ISO 45001:2018 clauses;
- can be used as practice for internal auditors workshops.
- allows every employee to check his/her activity performance in compliance with the new requirements of ISO 45001:2018 and more.
This ISO 45001:2018 Occupational Safety & Health Management System Framework shows the interrelationship among the various clauses. It helps in designing the management system.
A concise downloadable presentation on Occupational Health & safety (OH&S) Management System based on ISO 45001:2018 with notes consisting of 41 slides.
The presentation gives an overview of the following topics:
1. What is OH&S management system?
2. Why is it important?
3. History of safety management
4. Various models of safety management
5. Introduction to ISO 45001:2018 standard
6. Introduction to concepts like HIRA, control hierarchy and PDCA
7. Definitions of important terms related to OH&S management system and important distinction between terms like unsafe conditions & acts, and accidents & near misses.
8. Process for implementation of ISO 45001:2018 and its benefits
This is a preview of only partial presentation.
The complete ppt can be downloaded at:
https://flevy.com/browse/marketplace/iso-450012018-ohands-management-systems-awareness-program-5958
The presentation provide a simple and clear explanation to all aspects of ISO : 14001 Environmental Management System for a manufacturing organization with thrust for line managers.
Global Manager Group provides this presentation that talks about mandatory documents required for ISO 14001:2015 Certification. The key documents like quality manual, procedures, SOPs, audit checklist, etc required for certification are described in details. Also give information about how Global Mananger Group helps in quick certification by providing ISO 14001:2015 Documentation kit.
For more information visit @ http://www.globalmanagergroup.com/
The new standard is designed to help organisations around the world ensure the health and safety of the people who make their business possible.
This standard is set to replace the popular OHSAS 18001 standard, with the overall purpose remaining the improvement of occupational health and safety performance. ISO 45001 will more easily integrate with other ISO Management Systems standards including ISO 9001:2015 and ISO 14001:2015.
ISO 45001 will require an organization to look beyond its immediate health and safety issues and take into account what the wider society expects of it. Organisations will have to think about their contractors and suppliers, as well as the effects their activities have on neighbouring communities.
As globalisation and global trade continue to escalate, organisations’ stakeholders are expecting organisations to be ethical in every aspect of their business, especially in the way they treat employees. ISO 45001 will give organisations an internationally recognised occupational health and safety standard to follow. This standard provides the specification for formal, systematic analysis and management of risk, management of regulatory compliance, promotion of safer work practices, and evaluation of occupational health and safety performance. This systematic approach facilitates a decrease in the number of incidents and ultimately less disruption to business.
In order to comply with international needs and requirements, more than 50 countries and organisations including the International Labour Organization (ILO) have been involved in the creation of ISO 45001. The aim is to provide a tool that can be used by any organisation, in any industry, anywhere in the world.
Organisations currently certified to OHSAS 18001, can remain so through the transition period offered after the publication of the ISO 45001 standard.
42 pages editable MS Word document with detailed explanations, auditor tips and recommendations - our ISO 45001 Audit checklist can be utilized in a number of ways. The ISO 45001:2018 Audit checklist:
- provides a complete understanding of how to verify compliance with the requirements of all ISO 45001:2018 clauses;
- can be used as practice for internal auditors workshops.
- allows every employee to check his/her activity performance in compliance with the new requirements of ISO 45001:2018 and more.
This ISO 45001:2018 Occupational Safety & Health Management System Framework shows the interrelationship among the various clauses. It helps in designing the management system.
A concise downloadable presentation on Occupational Health & safety (OH&S) Management System based on ISO 45001:2018 with notes consisting of 41 slides.
The presentation gives an overview of the following topics:
1. What is OH&S management system?
2. Why is it important?
3. History of safety management
4. Various models of safety management
5. Introduction to ISO 45001:2018 standard
6. Introduction to concepts like HIRA, control hierarchy and PDCA
7. Definitions of important terms related to OH&S management system and important distinction between terms like unsafe conditions & acts, and accidents & near misses.
8. Process for implementation of ISO 45001:2018 and its benefits
This is a preview of only partial presentation.
The complete ppt can be downloaded at:
https://flevy.com/browse/marketplace/iso-450012018-ohands-management-systems-awareness-program-5958
The presentation provide a simple and clear explanation to all aspects of ISO : 14001 Environmental Management System for a manufacturing organization with thrust for line managers.
Global Manager Group provides this presentation that talks about mandatory documents required for ISO 14001:2015 Certification. The key documents like quality manual, procedures, SOPs, audit checklist, etc required for certification are described in details. Also give information about how Global Mananger Group helps in quick certification by providing ISO 14001:2015 Documentation kit.
For more information visit @ http://www.globalmanagergroup.com/
The new standard is designed to help organisations around the world ensure the health and safety of the people who make their business possible.
This standard is set to replace the popular OHSAS 18001 standard, with the overall purpose remaining the improvement of occupational health and safety performance. ISO 45001 will more easily integrate with other ISO Management Systems standards including ISO 9001:2015 and ISO 14001:2015.
ISO 45001 will require an organization to look beyond its immediate health and safety issues and take into account what the wider society expects of it. Organisations will have to think about their contractors and suppliers, as well as the effects their activities have on neighbouring communities.
As globalisation and global trade continue to escalate, organisations’ stakeholders are expecting organisations to be ethical in every aspect of their business, especially in the way they treat employees. ISO 45001 will give organisations an internationally recognised occupational health and safety standard to follow. This standard provides the specification for formal, systematic analysis and management of risk, management of regulatory compliance, promotion of safer work practices, and evaluation of occupational health and safety performance. This systematic approach facilitates a decrease in the number of incidents and ultimately less disruption to business.
In order to comply with international needs and requirements, more than 50 countries and organisations including the International Labour Organization (ILO) have been involved in the creation of ISO 45001. The aim is to provide a tool that can be used by any organisation, in any industry, anywhere in the world.
Organisations currently certified to OHSAS 18001, can remain so through the transition period offered after the publication of the ISO 45001 standard.
OHSAS 18001 + ISO 14001 – Implementation MethodsPECB
The essential difference between ISO 14001 and OHSAS 18001 is that ISO 14001 focuses on managing your organization's impact on the external environment, while OHSAS 18001 focuses on managing your organization's internal environment to ensure a safe and healthy workplace. OHSAS 18001 was intentionally developed to be compatible with ISO 14001, for easier integration of quality, environmental and occupational health & safety management systems by organizations. This webinar provides you with the needed information when you want to combine these standards.
Main points covered:
• ISO 14001 and OHSAS 18001 History
• ISO 14001 and OHSAS 18001 Compare Clause
• Steps that should be implemented
• Risk Assessment
Presenter:
This webinar was presented by Shahriyar Majlesein, PECB Certified Trainer and Executive Director/Operation Manager at SMEC Engineering Group.
Link of the recorded session published on YouTube: https://youtu.be/_MVxSN0nKp0
ISO9001, ISO14001 & OHSAS 18001 for the construction industryrichardporter
Introduction to ISO9001, ISO14001 & OHSAS18001 for construction companies in tier 2 & 3 of the Hinkley Point supply chain. Emphasis on business benefits
This PowerPoint slide gives a brief introduction to OHSAS 18001 and is useful for implementing the standard on your organization.
Ravi Shrestha (Nepal)
Years between late 1700s and the early 1900s, also known as the
Industrial Revolution, have been years with significant changes to society,
economy and environment. During this period, changes and innovations
in technology have brought growth in different industrial sectors such as
agriculture, manufacturing, mining and overall mass production.
Matt Boyle, Environment and Sustainability Manager from Midfield Meats Inc., Warrnambool presented to VCE Environmental Science students at Hawkesdale p12 College
Implementation Of Environmental Technologies To Curb Pollution Powerpoint Pre...SlideTeam
Product Description of Environmental Technology The PowerPoint template is useful tool in implementing environmental technologies in order to curb pollution. It will help user in offering clients with technological solutions in order to handle negative impact on environment. It includes handling air, water through treatments such as exhaust air treatment, wastewater treatment, and thermal waste treatment. The technological solutions are custom made and sustainable solutions. Initially it will comprise details about environmental technology industry overview by providing details about overall industry in terms of environmental technology goods and services as well as existing market leader, with segment wise revenues generated in US markets. It covers details about role of environmental technology in reducing harm on environment due to resource consumption, emissions, etc. The template covers details about services spectrum that comprise of tailor made solutions and optimum process designs, customize solutions to tackle water, wastewater treatment. The environmental technologies solutions include exhaust air treatment by treating various air pollutants. Exhaust air treatment include thermal treatment, thermal oxidation, adsorption, etc. The wastewater treatment includes zero liquid discharge to treat inorganic contaminants such as cyanide, chromates, nitrites, arsenates and organic contaminants such as oil, grease and their treatment include sewage sludge conversion, sedimentation and through anaerobic digestion process. The solution includes ammunition disposal for chemical weapon destruction, conventional ammunition destruction etc. https://bit.ly/3vfoWXV
An introduction to the terminology used in VCE Environmental Science Unit 4 (Area of Study 2) - Environmental Management Systems, Environmental Risk Assesssment, EES, EIS, Life Cycle Analysis and Precautionary Principle.
Introducing our Sustainable Technologies Protecting Environment PowerPoint Presentation Slides that helps you to be an environmentally responsible company. Define the agendas of your company to curb the negative impacts of technology on the environment with our invigorating PPT visuals. Survey the market revenue statistics of your company with our aptly crafted technologically-safe PPT graphics. Use these PPT templates to examine the challenges faced in conserving and reducing the harm on the environment to create customizable and tailor-made solutions for cleaner and greener surroundings. Employ this green technology impact PPT slideshow to give a detailed account of your company's operations, activities, and strategies. Present an overview of the treatment system designed by the firm with these editable slides. Provide the cost summary for the clean technology implementation services and solutions using our energy-efficient PPT slides. Gain the trust of your clients by introducing your team responsible for formulating and implementing the plan of action for safe technology by using these professionally crafted eco-techno PPT layouts. Download our completely adaptable conservationist PPT slides and impress your audience with your skills. https://bit.ly/31zVUVu
Natural farming @ Dr. Siddhartha S. Jena.pptxsidjena70
A brief about organic farming/ Natural farming/ Zero budget natural farming/ Subash Palekar Natural farming which keeps us and environment safe and healthy. Next gen Agricultural practices of chemical free farming.
Artificial Reefs by Kuddle Life Foundation - May 2024punit537210
Situated in Pondicherry, India, Kuddle Life Foundation is a charitable, non-profit and non-governmental organization (NGO) dedicated to improving the living standards of coastal communities and simultaneously placing a strong emphasis on the protection of marine ecosystems.
One of the key areas we work in is Artificial Reefs. This presentation captures our journey so far and our learnings. We hope you get as excited about marine conservation and artificial reefs as we are.
Please visit our website: https://kuddlelife.org
Our Instagram channel:
@kuddlelifefoundation
Our Linkedin Page:
https://www.linkedin.com/company/kuddlelifefoundation/
and write to us if you have any questions:
info@kuddlelife.org
"Understanding the Carbon Cycle: Processes, Human Impacts, and Strategies for...MMariSelvam4
The carbon cycle is a critical component of Earth's environmental system, governing the movement and transformation of carbon through various reservoirs, including the atmosphere, oceans, soil, and living organisms. This complex cycle involves several key processes such as photosynthesis, respiration, decomposition, and carbon sequestration, each contributing to the regulation of carbon levels on the planet.
Human activities, particularly fossil fuel combustion and deforestation, have significantly altered the natural carbon cycle, leading to increased atmospheric carbon dioxide concentrations and driving climate change. Understanding the intricacies of the carbon cycle is essential for assessing the impacts of these changes and developing effective mitigation strategies.
By studying the carbon cycle, scientists can identify carbon sources and sinks, measure carbon fluxes, and predict future trends. This knowledge is crucial for crafting policies aimed at reducing carbon emissions, enhancing carbon storage, and promoting sustainable practices. The carbon cycle's interplay with climate systems, ecosystems, and human activities underscores its importance in maintaining a stable and healthy planet.
In-depth exploration of the carbon cycle reveals the delicate balance required to sustain life and the urgent need to address anthropogenic influences. Through research, education, and policy, we can work towards restoring equilibrium in the carbon cycle and ensuring a sustainable future for generations to come.
UNDERSTANDING WHAT GREEN WASHING IS!.pdfJulietMogola
Many companies today use green washing to lure the public into thinking they are conserving the environment but in real sense they are doing more harm. There have been such several cases from very big companies here in Kenya and also globally. This ranges from various sectors from manufacturing and goes to consumer products. Educating people on greenwashing will enable people to make better choices based on their analysis and not on what they see on marketing sites.
2. Global Issues
Environmental Management System
(EMS)
Occupational Health and Safety
(OH&S)
Global Worming Warming Accident
Acid Rain Occupational Health Hazard
Ozone Depletion Lost Time
Depletion of Water resources Unrest
Deforestation
3. Causes of Acid Rain
• Burning coal. Oil and natural gas in
power stations makes electricity,
giving off sulphur dioxide (SOX) gas.
• Burning petrol and oil in vehicle
engines gives off nitrogen oxides
(NOX) as gases.
• These gases mix with water vapour
and rainwater in the atmosphere
producing weak solutions of
sulphuric and nitric acids – which
fall as acid rain.
4. Effects of Acid Rain
• Damage the buildings, statues
• Destroy marble and metals
• Causes human respiratory (laugh) diseases
• Increases the acidity of soil
• Induce the release of aluminum ions from soil
elements.
• Acidify lakes
5. Sandstone portal Figure on Herten Castle in Ruhr district of Germany.
Effect of Acid Rain
1908 1969
6. So what could we do
Technological innovations to reduce SOX and NOX emission from fossil fuel
combustion .
Efficient use of energy (electricity).
Carpool, use public transportation, or better yet, walk or bicycle whenever
possible
Use alternative energy sources .
Use energy efficient appliances: lighting, air conditioners, heaters,
refrigerators, washing machines, etc.
Only use electric appliances when you need them.
Buy vehicles/ Machines with low NOX emissions, and maintain them well.
7. The ozone layer blocks 95-99% of the sun’s Ultraviolet Radiation
10. Ozone Depletion
Too much ultra-violet light can result in
Weakened Immune System.
Reduced crop yield.
Damages to marine ecosystem.
Increase risk of non-melanoma and malignant melanoma skin cancer .
Eye damage such as cataracts.
Reduction in phytoplankton.
Damage to the DNA in various life-forms .
this has been as observed in Antarctic ice-fish that lack pigments to shield them from the
ultra-violet light (they've never needed them before).
11. Impacts on other animals
Reduces plankton population
Reduces penguin population
Reduces the percentage of hatching of frog eggs
12. Possible Solution
• all production and usage of CFC's (Chlorofluorocarbon) must be stopped.
• we should follow the Recycle, Reuse, Reduce, initiative to help control
climate change which has a key part for the layer to recover. In addition,
we should educate others and try to live lives with limited use of these
chemicals.
13. Where is the water?
Earth is the “Water Planet”
70% of surface is water
97% by volume is salt water
-------undrinkable, not usable by most plants
3% fresh water
16. How We Pollute the Water
• Point-source pollution:
From a discrete location, like a factory or sewer pipe. Occurs when harmful chemicals are
released into waterways .
• Nonpoint-source pollution: From many places spread over a large area, such as when
snowmelt runoff picks up pollutants along its path.
A 2004 oil spill off the Alaskan coast
17. Effects of Deforestation
Loss of Biodiversity
Erosion of Soil
Disruption of the Water Cycle
Climate Change
Flooding and Drought
18.
19. What Could we do ?
• Tree plantation .
• Go paperless.
• Recycle and buy recycled products.
• Eat vegetarian meals as often as possible.
22. Management System
Management system means what the organization does to manage its
processes, or activities in order that
its products or services meet the organization’s objectives, such as
satisfying the customer's quality requirements,
complying to regulations, or
meeting environmental objectives
23. Management System Standards
To be really efficient and effective, the organization can
manage its way of doing things by systemizing it.
Nothing important is left out.
Everyone is clear about who is responsible for doing what,
when, how, why and where.
Management system standards provide the organization with
an international, state-of-the-art model to follow.
24. Birth Of EMS Standard
• September 1996- ISO 14001 EMS finalized
– "Environmental Management Systems-
Specification With Guidance For Use"
• International Organization For
Standardization
25. ISO 14001:2007 EMS
ISO 14001 gives the requirements for what the organization must do to
manage processes affecting the impact of its activities on the environment.
ISO 14001 concern the way an organization goes about its work.
It is not a product standards.
It is a Service Standards.
It is a process standards.
It can be used by both Product manufacturer and service providers.
26. Facility-
wide
Department
by
Department
A B C
Departments
Core of the EMS
Review Legal and Other
Requirements
Aspects
Legal Requirements
Evaluate for
Significance
Regulated
Potential
Release
Energy and
Business Plan
Env. Load
Significant Aspects
Not Significant
27. Categorize
Objectives and
Targets
Develop Environmental
Management Programs
“Project Plan”
Core of the EMS
Develop
Procedures and
Work Practices
l Tasks, Responsible
Parties, Time
Frames
l Operational Controls
l Monitoring and
Measurement
EMP’s
Procedures
Work Prt.1
Work Prt.2
Work Prt.3
Objectives and Targets Environmental
Management Programs
Procedures/Work
Practices
Control/
Maintain
(Regulatory
Compliance)
Improvement
(Energy
Reduction)
Study
(Feasibility
Study)
Significant
Aspects
28. Definitions
EMS
System to implement an organization’s environmental policy and manage its
environmental aspects.
Environment
• Surroundings in which an organization operates (air, water, land, natural
resources, flora/fauna, humans and their interrelation…)
Environmental Aspect
• Element of an organization’s activities or products or services that can
interact with the environment.
Environmental Impact
• Any change to the environment, whether negative or positive, in whole or
partially resulting from an organization’s environmental aspects.
30. OHSAS 18001
OHSAS 18001 is an international standard which specifies requirements for a
Health & Safety Management System.
Produced in 1999. Became Standard in 2007
Specification produced by several organisations (both from the UK and
internationally) led by the BSI.
The management system model used in OHSAS 18001 is aligned with ISO
14001 standard sections.
OK!!
2 in 1
31. Hazard
– Source or situation with a potential for harm in terms of human injury or ill health,
damage to property, damage to the workplace environment, or a combination of these.
Safety
– Freedom from unacceptable risk of harm
Risk
– Combination of the likelihood and consequences of a specified hazardous event
occurring.
Risk Assessment
– Overall process of estimating the magnitude of risk and deciding whether or not the
risk is tolerable.
Hazard Identification, Risk Assessment and Risk Control – HIRA - RC
– Ranked based on frequency and severity.
– For those with High Risk, develop targets, objectives and management programs to
reduce risk and develop controls.
Examples
– H&S – Chemical exposure, Pinch Points, Lifting Devices, Confined Space, Electrical
36. 4.1 General Requirements
4.2 Policy
We must have to have an Environmental and Occupational Health and Safety Policy which must
have to describe our overall Approach and Intentions towards the Environment And Health And
Safety . And the Policy must have to :
1. Be Appropriate to the nature, scale, and environmental impacts of the organization activities,
goods produced and organization’s OH&S Risk.
2. Must have to be Approved by the Top Management.
3. Include a Commitment to continual improvement , prevention of pollution and prevention of
injury and ill health and continual improvement in Environmental/OH&S management and
performance.
4. Include a Commitment to relevant Legal requirements.
5. Provide a framework for setting and reviewing Environmental / OH&S Objectives and Targets.
6. Be Documented, Implemented and Maintained, and Communicated to all employees (also
contractors).
7. Be Available to the public.
42. 4.3 Planning
We must have to ensure that the results of these assessments are considered when
determining controls. When determining controls, or considering changes to existing
controls, consideration shall be given to reducing the risks according to the following
hierarchy:
43. Aspect Categories
• Material use
• Air emissions
• Water use
• Energy use
• Storm water discharges
• Storage tanks
• Wastewater discharges
• Solid & liquid waste
• Noise
• Odor
• Natural environment
• Land condition
44. 4.3 Planning Process
Identify
Activities,
Product
and Service
Identification
of
Environmental
Aspects and
Impacts,
Hazard & Risk
Assessment
Determining
priority of
the Aspects
Determining Legal and Other
Requirements
Establishing
Objectives
and Targets
Develop
Environmen
tal / OH&S
managemen
t program
45. 4.3.2 Legal and other requirements
We must have to have a procedure that explains how the organization obtains
information regarding its legal and other requirements, and makes that information
known to key functions within the organization. The intent of this element is to
identify the environmental legal and other requirements that relate to our operations
and activities so that we can ensure that we have taken it into account in the EMS. In
doing so, the organization must also determine how these requirements apply to the
significant aspects.
ISO 14001 EMS BS 18001 OHSAS
1. Air Consent
2. Water Consent.
3. Hazardous waste Consent.
4. Boiler Certificates.
5. License to operate DG set.
6. Related Health And Safety Requirements .
7. Factory license .
8. Stability certificate.
9. Noise limit regulation.
1. Agreements with public Authorities.
2. Agreements with Customers.
3. Non Regulatory Guidelines.
4. Voluntary principles or Code of practice .
5. Requirements of Trade Associates.
6. Agreements with Community Group or
Non Government Organizations.
7. Corporate/ Company Requirements.
47. 4.3.3 Objectives, Targets And Program(s)
While establishing and maintaining Objectives, Targets and Programs we Must have to
consider:
Legal & other requirements.
Significant Environmental Aspects/ Occupational Hazards .
Technological options.
Financial and operational requirements.
Views of interested parties.
The objectives and targets shall be consistent with the Environmental
Policy, including the commitment to prevent Pollution & Accidents.
48. Environmental / OHSAS Management Programs
An EMS/OH&S Program is an action plan to specify:
How objectives and targets will be accomplished.
Who is responsible for achieving them.
Who will manage and supervise the activities.
Who will carry out the work.
What they will do.
What resources are needed (people, skills, equipment, time, money)
When the tasks will be completed (a schedule)
4 3 2 1
51. Implementation and Operation
Structure and
Responsibility
Training,
Awareness and
Competence
Document Control
EMS/OH&S Documentation
Emergency preparedness
and response
Communication
Operational Control
Organization &
Accountability
Capabilities &
Communications
Controls
52. 4.4 Implementation and operation
4.4.1 Resources, Roles, Responsibility, Accountability and
Authority
Management must have to ensure :
Provision of all resources.
o Specialised skills
o Technology
o Financial resources
Roles, responsibility & authorities Must have to be defined, documented & communicated.
Management must have to appoint a representative for implementation .
And the Managers must have to demonstrate commitment to continual improvement by
reviewing all the reports all operational performances/effects of the EMS & OHSAS
Management system.
53. 4.4.2 Competence, Training and Awareness
We must have to have a training procedure. And it must have to include the suppliers as well
who have significant influence on the EMS & OHSAS system . We must have to determine and
record the educational requirements and the competence level of the personals who are
included and will be included.
We must have to Ensure employee awareness and competence with records by taking into
account differing levels of:
– Responsibility
– Ability
– Literacy
– Aspects/Hazard/Risk
Most of required training driven by regulation.
We must have to have a training record
54. 4.4.3 Communication, Participation and Consultation
4.4.3.1 Communication
4.4.3 Communication
With regard to our environmental and OH&S aspects and management system, we must have to establish
implement and maintain Procedures for
Internal communication between the various levels and functions of the organization.
a) HIRA & determining Control.
b) Incident Investigation.
c) Development and review of OH&S policies and Objectives .
Receiving, documenting and responding to relevant communication from external interested parties.
And we must have to determine & Established proper methods of communication.
Appropriate communication processes must has to be established and carried out within the organization
regarding the effectiveness of the system
Management
Lateral
Operations
UP DOWN
Complaints / Queries Interested
Parties
External
Communication
55. 4.4.3.2 Participation and Consultation ( OHSAS )
We must have to establish, implement and maintain a Procedure to involve the workers in :
HIRA and determining Control.
Incident investigation.
Development and review of OHSAS policy and objectives.
Information regarding participation arrangements.
We must have to have a Safety committee/ Suggestion Boxes
where there are any changes:
Consultation with internal and external parties must have to be involved
56. 4.4.4 Documentation
SL` Procedure Standard Clause EMS 14001 OHSAS 18001
1 Aspect procedure 4.3.1
2 procedure For Hazard Identification And Risk Assessment -- HIRA 4.3.1
3 Legal And Other Requirements Procedure 4.3.2
4 Procedure for competence Training and Awareness 4.4.3
5 Procedure For Communication 4.4.3
6 Procedure for Participation and communication 4.4.3.2
7 Procedure For Control Of Documents 4.4.5
8 Operational Control Procedure 4.4.6
9 Procedure For Emergency preparedness and Response 4.4.7
10 Monitoring and Measurement Procedure 4.5.1
11 Procedure for Evaluation of Compliance 4.5.2
12 Incident investigation procedure 4.5.3.1
13 Procedure for NC/ CA / PA 4.5.3 / 4.5.5.2
14 Procedure for Control of Documents 4.5.4
15 Procedure for Internal Audit 4.5.5
57. 4.4.4 Documentation
SL Documents Clause EMS OHSAS SL Documents Clause EMS OHS
AS
1 Policy 4.2 11 Agenda/ Attendance of meeting/
Meeting minutes
2 Aspect / Impact Register 4.3.1 12 List of documents 4.4.4
3 HIRA 4.3.1 13 List od External Origin Documents 4.4.5
4 All legal requirements 3.2 14 List of OC/ Procedures 4.4.6
5 Objectives And Targets /
Program
4.3.3 15 Mog Drill Records 4.5.1
6 Resources, Role, Responsibility,
Authority
4.4.1 16 Monitoring Records 4.5.1
7 Competence Methods 4.4.2 17 Compliance Evaluation reports 4.5.2
8 Training plan Identification /
Training Plan /Training Records/
effective evaluation of Training
4.4.2 18 Incident register 4.5.3.1
9 Communication Record /
Register
4.4.3 19 All NC/CA/PA ( reports ) 4.5.5
10 Safety committee Meeting 4.4.3.2 20 Internal Audit records 4.5.5
21 Management Review Minutes /and
records
4.6
58. Control of Documents
Control the documents required by the EMS and OHSAS . Records are a special type of
document and must be controlled as required by the standards
Establish a documented procedure to:
1) Approve documents for adequacy prior to issue.
2) Review, update as necessary, and re‐approve documents.
3) Identify the changes and current document revision status.
4) Make relevant documents available at points of use.
5) Ensure the documents remain legible and readily identifiable.
6) Identify external documents and control their distribution.
7) Prevent obsolete documents from unintended use.
8) Apply suitable identification if obsolete documents are retained.
Procedure
WI
WI
WI
59. Define needed
Documents
Develop
Documents
Review & Approve
Prior to use
Issue to point of
use
Update Documents
Identify if retimed
Changes ?
Obsolete?
Prevent unintended
use
Ensure that document is and remains
legible and readily Identifiable
General Rules
The right document must be
available at the right time in the
right place
Yes
Yes
No
Identify revision status
Control “ Externally”
Generated Documents too
( Permits and licenses)
60. Document versus Records
Documents Records
Describes how things are going to be done Describes how things have been done /
performed
Can be revised Con not be changed
Example : policy/ Procedure / work
instruction
Example : Monitoring records/ Obsolete
documents
61. 4.4.6 Operation control
We must have to establish and maintain arrangements to ensure that all operations and activities
are carried out effectively and safely. We must :
Plan to control operations and activities associated with identified Environmental risks
and any health and safety objectives
Procedures where required which required operating criteria
Procedures related to risks of goods and services and for communication with suppliers
Procedures for workplace and process design in order to eliminate or reduce risks at
source
We must also plan and prepare for all foreseeable accident, incident and emergency situations
Type of operational controls :
SOP Preventive maintenance
Contract language OCP for hazardous tasks
Singe OCP for hazardous materials
Log book LOTO TO
Check lists
62. 4.4.7 Emergency Preparedness and Response
We must have to have a Procedure in place to:
1) Identify the Potential emergency situations,
2) Respond to those actual emergency situations / incident / accident .
2) Preventing and Mitigating the environmental impacts , likely illness and
injury that may be associated with them.
3) Where necessary it must have to be Reviewed particularly after an
emergency situation / incidents.
4) We must have to periodically test the procedure where practicable.
5) Where necessary external service provider must have to be involved.
6) Personnel should be trained to response to the emergency situations
64. 4.5.1 Monitoring and Measurement
We must have to establish, implement and maintain a procedure(s) to monitor and measure, on a
regular basis, the key characteristics of our operations that can have a significant environmental
and OH&S impact.
1) Procedures should be in place to monitor how well H&S objectives are met
2) Proactive (compliance with law, man sys etc.)
3) Reactive (accident, ill health etc.)
4) Equipments required for monitoring should be maintained and calibrated.
5) Operation control .
6) Inspection .
7) Root cause analysis
65. 4.5.2 Evaluation of Compliance
We must have to have a procedure to :
1. Periodically evaluate compliance with applicable legal requirements.
2. Also evaluate compliance with other requirements.
3. Keep records of such evaluations.
Evaluation of compliance ----- Inputs :
1. Audits .
2. The results of regulatory inspection.
3. Analysis of legal ad other requirements.
4. Review of documents and / or records of incidents .
5. Risk assessment.
6. Facility inspection.
7. Facility tour and /or direct observation.
8. Interviews.
9. Project or work review.
10. Analysis of the test results from monitoring and testing.
66. 4.5.3 Non-conformity, Corrective Action and Preventive Action
We must have to have a procedure to
1. Define responsibility and authority for handling and investigating
nonconformance, taking action to mitigate any impacts caused, and for initiating
and completing corrective and preventive action.
2. And the corrective or preventive action taken to eliminate the causes of actual
and potential nonconformance's must have to be appropriate to the magnitude
of problems and adequate with the environmental impact encountered.
3. Investigating nonconformity(ies), determining their cause(s) and taking actions in
order to avoid their recurrence.
4. Recording the results of corrective action(s) and preventive action(s) taken, and
5. reviewing the effectiveness of corrective action(s) and preventive action(s) taken
67. 4.5.3.1 Incident Investigation ( OHSAS )
We must have to establish implement and maintain a procedure to record, investigate
and analysis incidents in order to :
1) Determine the factors contributing to incidents.
2) Identify corrective action and the opportunities for preventive actions.
3) identify opportunities for continual improvement.
4) perform investigation in timely manner.
5) Communicating the results of the investigation.
68. 4.5.4 Control of Records
We must have to establish, implement and maintain a procedure(s) for :
1) Identification, storage, protection, retrieval, retention and disposal of all
records.
2) Establishing and maintaining records as necessary to demonstrate conformity
to the requirements of EMS and OHSAS and of the International Standards.
Records Must have to remain legible, readily identifiable, and retrievable
69. 4.5.5 Internal EMS / OHSAS Audits
To ensure the effectiveness of the EMS / OHSAS we must have to plan, establish, implement and
maintain specific internal audits (Program) in a planned interval based on the severity . We must:
1) Consider the status and importance of the audited areas.
3) Consider the results of prior audits.
4) Define the audit criteria, scope, frequency, and methods.
5) Select and use impartial and objective auditors (not audit their own work).
Establishing a documented procedure to address responsibilities and requirements to:
1) Plan audits and conduct audits.
2) Establish records and report results.
3) Maintain records of the audits and their results.
We must have to ensure management (Plant in charge) of the audited areas takes actions
without undue delay to eliminate detected non conformities and their causes. Verify through
follow‐up actions the implementation of the action and report the results.
70. 4.6 Management Review
Our top management must have to review the EMS AND OHSAS System regularly in a planned
interval to :
a) Ensure suitable, adequate, and effective systems.
b) Assess possible opportunities for improvement.
c) Evaluate the need for any changes to the system.
d) Consider the need for changes to the EMS and OHSAS policy and objectives/
Targets
All outputs of the management reviews must have to be recorded and maintained as well .
Policy
Management
Review
Implementation
and Operation
Checking and
Corrective Action
Planning
71. Spread the word! Tell other people things, that they can do to help prevent global warming.
- Remember -- Every person makes a difference!
Presented by : Mohammed Enamul Kabir