17.11.2016 fm design chazapis presentation
•Download as PPTX, PDF•
0 likes•189 views
The document discusses various aspects of facility management design and commissioning processes. It outlines the steps for commissioning new construction including establishing owner requirements, testing systems, and providing training. It also describes re-commissioning existing facilities every 3-5 years to audit performance, detect issues, and update manuals. Retro-commissioning aims to optimize existing building performance for those never previously commissioned. Standard facility management includes planning, maintenance, security and other services. Facility design can reduce costs and increase productivity, air quality and comfort.
Report
Share
Report
Share
Recommended
Projects DWDobbs 2016a
Dennis Dobbs has over 15 years of experience providing engineering solutions to improve plant operations and maintenance programs. He has worked with several companies, including Ross Technical Services, Arlington County Water Pollution Control Bureau, Mantec, Inc., Jacobs-Sirrine Engineers, P. T. Alas Buana Raya, Fluor Daniel, and Alcoa. Some of his responsibilities have included developing predictive maintenance programs, creating performance reports, analyzing maintenance management strategies, and providing training. He has helped clients improve key metrics like PM execution, schedule compliance, and emissions reductions.
Skips New Resume
William Carter is seeking a position as a CMM Programmer with over 10 years of experience in quality inspection, dimensional layouts, CMM programming using various software, training quality inspectors, and supervising employees. He has an Associate's degree in Electronic Technology and certifications in quality techniques and as a mechanical inspector.
Computer Aided Process Planning (CAPP)
Computer-aided process planning (CAPP) is the application of computers to assist process planners in planning functions. CAPP integrates computer-aided design (CAD) and computer-aided manufacturing (CAM) by providing a direct connection between design and manufacturing. There are two main approaches to CAPP: variant process planning and generative process planning. Variant process planning retrieves and modifies standard process plans from a database, while generative process planning creates customized process plans using decision logic and part geometry data without predefined plans. CAPP provides benefits like increased productivity, consistency of plans, accuracy of plans, and reduced costs.
FINAL CHARTER
This charter outlines a project to increase the level of kitting on the production line. Currently, materials are held trackside rather than being kitted. The project will analyze increasing kitting over time. The engineering and manufacturing BOMs need to be accurately aligned to drive routings that define where kits are required. Benefits include more effective space use, reduced line feeding, and better stock control. The scope includes most material except high volume, low cost parts. Deliverables are to analyze work content, route BOMs to stations, assess SAP changes, identify best kitting process, test and refine the solution, and provide training. Risks include resource constraints from other projects and BOM/routing changes. The
Meenu Resume
Meenu Kumari is an instrumentation engineer with over 8 years of experience in project management, maintenance operations, erection and commissioning, and automation systems. She currently works as an assistant engineer for a thermal power plant project in Nigeria. Her experience includes working with DCS systems from ABB and Siemens and commissioning various industrial instrumentation equipment. She is proficient in all stages of project implementation from planning to execution and maintenance.
Capp
The document discusses computer aided process planning (CAPP). CAPP uses computer technology to aid in process planning for manufacturing a part. It provides the link between computer aided design (CAD) and computer aided manufacturing (CAM) by planning the manufacturing process for a designed part. There are two main approaches to CAPP - variant process planning, which modifies standard process plans, and generative process planning, which automatically generates custom process plans using part geometry and manufacturing knowledge. CAPP offers benefits like increased productivity, consistency, accuracy, and reduced costs and lead times compared to manual process planning.
Production planning and control
The document outlines the group members for a production planning project and discusses key concepts related to production planning and control including:
1) Production planning involves managing resources and selecting them to produce goods at the least cost and appropriate time. It remains dynamic as plans may change.
2) Material requirements planning determines when and how many parts/materials should be ordered to get the right materials to the right place at the right time.
3) Loading and scheduling involves assigning work to workers/equipment and setting job priorities and start/finish times.
DavidFloyd_2016
David T. Floyd has over 10 years of experience in maintenance and engineering roles. He is currently the Assistant Section Manager at Nan Ya Plastics Corporation, where he manages multiple shops and teams, performs annual evaluations, leads safety meetings, and oversees projects. Previously he was a Maintenance Supervisor at Nan Ya Plastics, where he led maintenance shops, created preventative maintenance plans, trained technicians, and ensured regulatory compliance. He has also held roles as an Assistant Mechanic and Co-op student, gaining experience in equipment repair, testing, and data analysis.
Recommended
Projects DWDobbs 2016a
Dennis Dobbs has over 15 years of experience providing engineering solutions to improve plant operations and maintenance programs. He has worked with several companies, including Ross Technical Services, Arlington County Water Pollution Control Bureau, Mantec, Inc., Jacobs-Sirrine Engineers, P. T. Alas Buana Raya, Fluor Daniel, and Alcoa. Some of his responsibilities have included developing predictive maintenance programs, creating performance reports, analyzing maintenance management strategies, and providing training. He has helped clients improve key metrics like PM execution, schedule compliance, and emissions reductions.
Skips New Resume
William Carter is seeking a position as a CMM Programmer with over 10 years of experience in quality inspection, dimensional layouts, CMM programming using various software, training quality inspectors, and supervising employees. He has an Associate's degree in Electronic Technology and certifications in quality techniques and as a mechanical inspector.
Computer Aided Process Planning (CAPP)
Computer-aided process planning (CAPP) is the application of computers to assist process planners in planning functions. CAPP integrates computer-aided design (CAD) and computer-aided manufacturing (CAM) by providing a direct connection between design and manufacturing. There are two main approaches to CAPP: variant process planning and generative process planning. Variant process planning retrieves and modifies standard process plans from a database, while generative process planning creates customized process plans using decision logic and part geometry data without predefined plans. CAPP provides benefits like increased productivity, consistency of plans, accuracy of plans, and reduced costs.
FINAL CHARTER
This charter outlines a project to increase the level of kitting on the production line. Currently, materials are held trackside rather than being kitted. The project will analyze increasing kitting over time. The engineering and manufacturing BOMs need to be accurately aligned to drive routings that define where kits are required. Benefits include more effective space use, reduced line feeding, and better stock control. The scope includes most material except high volume, low cost parts. Deliverables are to analyze work content, route BOMs to stations, assess SAP changes, identify best kitting process, test and refine the solution, and provide training. Risks include resource constraints from other projects and BOM/routing changes. The
Meenu Resume
Meenu Kumari is an instrumentation engineer with over 8 years of experience in project management, maintenance operations, erection and commissioning, and automation systems. She currently works as an assistant engineer for a thermal power plant project in Nigeria. Her experience includes working with DCS systems from ABB and Siemens and commissioning various industrial instrumentation equipment. She is proficient in all stages of project implementation from planning to execution and maintenance.
Capp
The document discusses computer aided process planning (CAPP). CAPP uses computer technology to aid in process planning for manufacturing a part. It provides the link between computer aided design (CAD) and computer aided manufacturing (CAM) by planning the manufacturing process for a designed part. There are two main approaches to CAPP - variant process planning, which modifies standard process plans, and generative process planning, which automatically generates custom process plans using part geometry and manufacturing knowledge. CAPP offers benefits like increased productivity, consistency, accuracy, and reduced costs and lead times compared to manual process planning.
Production planning and control
The document outlines the group members for a production planning project and discusses key concepts related to production planning and control including:
1) Production planning involves managing resources and selecting them to produce goods at the least cost and appropriate time. It remains dynamic as plans may change.
2) Material requirements planning determines when and how many parts/materials should be ordered to get the right materials to the right place at the right time.
3) Loading and scheduling involves assigning work to workers/equipment and setting job priorities and start/finish times.
DavidFloyd_2016
David T. Floyd has over 10 years of experience in maintenance and engineering roles. He is currently the Assistant Section Manager at Nan Ya Plastics Corporation, where he manages multiple shops and teams, performs annual evaluations, leads safety meetings, and oversees projects. Previously he was a Maintenance Supervisor at Nan Ya Plastics, where he led maintenance shops, created preventative maintenance plans, trained technicians, and ensured regulatory compliance. He has also held roles as an Assistant Mechanic and Co-op student, gaining experience in equipment repair, testing, and data analysis.
Resume
This document provides a summary of an individual's qualifications and experience. It outlines 19 years of experience in quality management, auditing, and project management in the oil and gas sector. The individual's current role is as a Senior Manager in Quality Management at Reliance Industries in India. Previous roles include working as a Project Quality Assurance Engineer for Japan Gas Corporation in Qatar and roles with MSTC in Saudi Arabia, including Quality Auditor and QA Manager for Saudi Aramco projects.
92131562-Time Management Method(slides only)
This document discusses time management methods in workflow management systems. It outlines 6 time constraints that can be applied to activities in a workflow model including time duration, forced start time, deadline, fixed date constraint, time difference, and time distance. It then describes how to calculate the critical path of a workflow both at build time and runtime by using forward and backward calculations while considering these time constraints. Finally, it discusses how identifying the critical path can benefit workflow designers and managers and provides solutions for handling potential time constraint violations.
Varun singh knowledge_management
Knowledge Management Assignment of XYZ company. Explaining standard operating process of company and how Company uses it to differentiate it from others.
Capp
This document discusses Computer Aided Process Planning (CAPP). CAPP systems automate the process of generating route sheets that list the sequence of operations required to manufacture a product. This helps standardize plans and reduce inconsistencies compared to manual process planning. CAPP integrates with CAD and CAM systems to facilitate the connection between design and manufacturing. There are two main types of CAPP systems - retrieval CAPP systems that modify existing plans, and generative CAPP systems that automatically generate new plans based on part data and decision rules.
Ramanathan_Mechanical_Resume_2016
Ramanathan Arumugasamy is a Senior Application Engineer with over 10 years of experience in rotating equipment package design and sales. He specializes in screw compressor, refrigeration, and piston compressor package design. He has a proven track record of securing new clients and managing projects to ensure timely delivery and customer satisfaction.
CAPP and Curriculum Management at HCT
The document discusses curriculum management at the Higher Colleges of Technology in the United Arab Emirates. It describes how CAPP and the Curriculum Management System are used to define programs, attach requirements, and perform degree audits in Banner. It also discusses different types of course equivalencies and provides advice on best practices for curriculum development.
Michael Smith Resume v5 with dates
Michael Smith has over 30 years of experience in operations, materials, supply chain and project management. He has a proven track record of implementing systems and processes that improve productivity, reduce costs and increase on-time delivery. Some of his accomplishments include decreasing inventory levels and lead times, improving schedule integrity, reducing overtime and waste, and freeing up space for new production lines. Mr. Smith holds certificates in production and inventory management and leads training programs to help staff improve performance.
Episode 32 : Project Execution Part (3)
Episode 32 : Project Execution Part (3)
Basic Grid
Cartesian Grid System
Basic Structures
Base Plates
Vertical Columns
Horizontal Platforms
Individual Foundation
Concrete Foundation
Cross beams
Equipments
Main – Vessels, Reactors, Heat Exchangers etc.
Auxiliary – Moving Equipments, Conveyer etc.
Interfaces and Outer Dimensions
Connecting dimensions for the connecting pipework
Connecting dimensions for the measurement instruments
Connecting dimensions for electrical or pneumatic drives
Position and dimensions for the point of support and mountings
Other Building Engineering
Windows, Doors, Staircase, Control Room, Ventilation etc.
SAJJAD KHUDHUR ABBAS
Ceo , Founder & Head of SHacademy
Chemical Engineering , Al-Muthanna University, Iraq
Oil & Gas Safety and Health Professional – OSHACADEMY
Trainer of Trainers (TOT) - Canadian Center of Human
Development
Sami Uddin Ahmed Zia resume1
Sami Uddin Ahmed Zia is seeking a job that provides growth, excellence and job satisfaction. He has a BS in Electronics with Industrial Automation from Sir Syed University of Engineering and Technology and is pursuing an MBA in International Business and Marketing Management from IQRA University. He has over 10 years of experience in maintenance, troubleshooting, installation and calibration of process instrumentation as well as design, engineering and commissioning of automation systems using DCS, PLCs and HMIs. His skills include management, analytical abilities, communication, and computer skills.
Seven quality tools
This presentation provided an overview of Ishikawa's seven basic quality tools: histograms, Pareto charts, cause-and-effect diagrams, run charts, scatter diagrams, flow charts, and control charts. For each tool, the presentation defined the tool, explained how to construct it, and provided an example of how the tool can be used. The tools are designed to be simple visual aids to help analyze data, identify relationships and causes, improve processes, and monitor quality.
D_David_ Thompson_resume_15_1
David Thompson has over 20 years of experience in manufacturing engineering roles. He has a proven track record of successfully managing projects from contract award through to production, implementing lean manufacturing practices to reduce costs and improve processes, and developing strong supplier relationships. He is skilled in CAD, CAM, CNC programming, and project management software. Currently he works as a Process Manufacturing Engineer, streamlining operations and transitioning plants.
Process planning approaches
Computer Aided Process Planing.
Process Planning Approaches Report .
1. Variant(Retrieval) CAPP Approach.
2.Generative CAPP Approach.
Episode 31 : Project Execution Part (2)
This document discusses the key aspects of electrical, measurement, and control (E/MC) engineering as they relate to project execution. It outlines the major tasks and considerations for each discipline. Electrical engineering involves designing the energy supply, control cabinets, and cabling. Measurement engineering includes selecting measuring instruments and connecting them to the control system. Control engineering develops the control program to analyze sensor data, determine necessary actions, and connect everything to the control room and local control panels. Close cooperation is needed between process and control engineers to properly define requirements and design the integrated automation system.
Anitha Vanga
This document contains the resume of Anitha Vanga. She has 6 years of experience in engineering services, change management, new product introduction, and process planning for automotive companies. Her roles included creating bills of materials, planning assembly sequences, authoring work instructions, and implementing engineering changes for projects involving earthmoving vehicles, engines, and wheel loaders. She holds a Bachelor's degree in Mechanical Engineering and is proficient in English, Hindi, and Telugu.
Resume
Ramesh Kumar G is a mechanical engineer with over 4 years of experience in engineering roles. He has expertise in new product development, manufacturing quality processes, and engineering change management. Currently he works as an Engineer at Flextronics where he is responsible for data migration activities, maintaining bill of materials accuracy, and coordinating engineering changes. He has experience working with ERP and PLM systems like BaaN and Agile.
Automation Upgrade
This document proposes a 4-6 year replacement plan for automation within the {blank} Program. It outlines replacing staff computers on a 4-6 year cycle based on their role, replacing all computer labs and student computers every 4 years. The proposal estimates $20,000 in annual savings from bulk purchasing and standardized systems. It presents a schedule and milestones for the initial replacement in 2010-2011 of 11 staff desktops, 44 student computers, and requests approval from the E-Team by 12/20/10.
MohamedSaleh_McMasterUniversity_Resume
An enthusiastic chemical engineering graduate, pursuing a challenging opportunity in the process and management industry
Process planning approaches
Process Planning Approaches - 1.Variant(Retrieval) Approach.
2. Generative Capp Approach.with case studies.
Computer Aided Process Planning Poster
This document discusses computer-aided process planning (CAPP). It defines process planning as the systematic determination of manufacturing methods to produce a part from raw materials to finished form. CAPP uses computers to assist process planners by storing and retrieving data, or automatically generating process plans for simple shapes. There are two main CAPP approaches: the variant approach retrieves existing generic plans and edits them, while the generative approach creates new plans from scratch without human intervention. Both have advantages like reduced planning time and costs, but the generative approach can plan new parts more easily and provide detailed automation control information.
Chazapis Commissioning: are you interested in?
This document discusses the benefits of commissioning for building owners and operators. Commissioning can help save energy and improve indoor air quality. It is required for LEED certification and can help evaluate building performance after occupancy. Commissioning procedures should be discussed with consultants. The document suggests that commissioning may be of interest for facilities management, integrating internet of things technologies, achieving high performance buildings, energy savings performance contracting, reducing operating expenses, and implementing an ISO 50001 energy management system.
Energy efficiency services by Greenleaf
Greenleaf Green Solutions is an energy consulting firm that helps clients improve energy efficiency and reduce costs through audits, modeling, and management systems. They have experts across engineering, energy, finance, and management who develop customized solutions. Their process involves comprehensive audits to identify savings opportunities, modeling to estimate performance and costs, and an energy management system to implement recommendations and achieve certification. Their goal is to deliver simplified and cost-effective ways for clients to save on energy.
Chazapis cx for better buildings
It is a short reference of all required steps and Workforce needed to achieve a Better Building Construction udefull for years.
More Related Content
What's hot
Resume
This document provides a summary of an individual's qualifications and experience. It outlines 19 years of experience in quality management, auditing, and project management in the oil and gas sector. The individual's current role is as a Senior Manager in Quality Management at Reliance Industries in India. Previous roles include working as a Project Quality Assurance Engineer for Japan Gas Corporation in Qatar and roles with MSTC in Saudi Arabia, including Quality Auditor and QA Manager for Saudi Aramco projects.
92131562-Time Management Method(slides only)
This document discusses time management methods in workflow management systems. It outlines 6 time constraints that can be applied to activities in a workflow model including time duration, forced start time, deadline, fixed date constraint, time difference, and time distance. It then describes how to calculate the critical path of a workflow both at build time and runtime by using forward and backward calculations while considering these time constraints. Finally, it discusses how identifying the critical path can benefit workflow designers and managers and provides solutions for handling potential time constraint violations.
Varun singh knowledge_management
Knowledge Management Assignment of XYZ company. Explaining standard operating process of company and how Company uses it to differentiate it from others.
Capp
This document discusses Computer Aided Process Planning (CAPP). CAPP systems automate the process of generating route sheets that list the sequence of operations required to manufacture a product. This helps standardize plans and reduce inconsistencies compared to manual process planning. CAPP integrates with CAD and CAM systems to facilitate the connection between design and manufacturing. There are two main types of CAPP systems - retrieval CAPP systems that modify existing plans, and generative CAPP systems that automatically generate new plans based on part data and decision rules.
Ramanathan_Mechanical_Resume_2016
Ramanathan Arumugasamy is a Senior Application Engineer with over 10 years of experience in rotating equipment package design and sales. He specializes in screw compressor, refrigeration, and piston compressor package design. He has a proven track record of securing new clients and managing projects to ensure timely delivery and customer satisfaction.
CAPP and Curriculum Management at HCT
The document discusses curriculum management at the Higher Colleges of Technology in the United Arab Emirates. It describes how CAPP and the Curriculum Management System are used to define programs, attach requirements, and perform degree audits in Banner. It also discusses different types of course equivalencies and provides advice on best practices for curriculum development.
Michael Smith Resume v5 with dates
Michael Smith has over 30 years of experience in operations, materials, supply chain and project management. He has a proven track record of implementing systems and processes that improve productivity, reduce costs and increase on-time delivery. Some of his accomplishments include decreasing inventory levels and lead times, improving schedule integrity, reducing overtime and waste, and freeing up space for new production lines. Mr. Smith holds certificates in production and inventory management and leads training programs to help staff improve performance.
Episode 32 : Project Execution Part (3)
Episode 32 : Project Execution Part (3)
Basic Grid
Cartesian Grid System
Basic Structures
Base Plates
Vertical Columns
Horizontal Platforms
Individual Foundation
Concrete Foundation
Cross beams
Equipments
Main – Vessels, Reactors, Heat Exchangers etc.
Auxiliary – Moving Equipments, Conveyer etc.
Interfaces and Outer Dimensions
Connecting dimensions for the connecting pipework
Connecting dimensions for the measurement instruments
Connecting dimensions for electrical or pneumatic drives
Position and dimensions for the point of support and mountings
Other Building Engineering
Windows, Doors, Staircase, Control Room, Ventilation etc.
SAJJAD KHUDHUR ABBAS
Ceo , Founder & Head of SHacademy
Chemical Engineering , Al-Muthanna University, Iraq
Oil & Gas Safety and Health Professional – OSHACADEMY
Trainer of Trainers (TOT) - Canadian Center of Human
Development
Sami Uddin Ahmed Zia resume1
Sami Uddin Ahmed Zia is seeking a job that provides growth, excellence and job satisfaction. He has a BS in Electronics with Industrial Automation from Sir Syed University of Engineering and Technology and is pursuing an MBA in International Business and Marketing Management from IQRA University. He has over 10 years of experience in maintenance, troubleshooting, installation and calibration of process instrumentation as well as design, engineering and commissioning of automation systems using DCS, PLCs and HMIs. His skills include management, analytical abilities, communication, and computer skills.
Seven quality tools
This presentation provided an overview of Ishikawa's seven basic quality tools: histograms, Pareto charts, cause-and-effect diagrams, run charts, scatter diagrams, flow charts, and control charts. For each tool, the presentation defined the tool, explained how to construct it, and provided an example of how the tool can be used. The tools are designed to be simple visual aids to help analyze data, identify relationships and causes, improve processes, and monitor quality.
D_David_ Thompson_resume_15_1
David Thompson has over 20 years of experience in manufacturing engineering roles. He has a proven track record of successfully managing projects from contract award through to production, implementing lean manufacturing practices to reduce costs and improve processes, and developing strong supplier relationships. He is skilled in CAD, CAM, CNC programming, and project management software. Currently he works as a Process Manufacturing Engineer, streamlining operations and transitioning plants.
Process planning approaches
Computer Aided Process Planing.
Process Planning Approaches Report .
1. Variant(Retrieval) CAPP Approach.
2.Generative CAPP Approach.
Episode 31 : Project Execution Part (2)
This document discusses the key aspects of electrical, measurement, and control (E/MC) engineering as they relate to project execution. It outlines the major tasks and considerations for each discipline. Electrical engineering involves designing the energy supply, control cabinets, and cabling. Measurement engineering includes selecting measuring instruments and connecting them to the control system. Control engineering develops the control program to analyze sensor data, determine necessary actions, and connect everything to the control room and local control panels. Close cooperation is needed between process and control engineers to properly define requirements and design the integrated automation system.
Anitha Vanga
This document contains the resume of Anitha Vanga. She has 6 years of experience in engineering services, change management, new product introduction, and process planning for automotive companies. Her roles included creating bills of materials, planning assembly sequences, authoring work instructions, and implementing engineering changes for projects involving earthmoving vehicles, engines, and wheel loaders. She holds a Bachelor's degree in Mechanical Engineering and is proficient in English, Hindi, and Telugu.
Resume
Ramesh Kumar G is a mechanical engineer with over 4 years of experience in engineering roles. He has expertise in new product development, manufacturing quality processes, and engineering change management. Currently he works as an Engineer at Flextronics where he is responsible for data migration activities, maintaining bill of materials accuracy, and coordinating engineering changes. He has experience working with ERP and PLM systems like BaaN and Agile.
Automation Upgrade
This document proposes a 4-6 year replacement plan for automation within the {blank} Program. It outlines replacing staff computers on a 4-6 year cycle based on their role, replacing all computer labs and student computers every 4 years. The proposal estimates $20,000 in annual savings from bulk purchasing and standardized systems. It presents a schedule and milestones for the initial replacement in 2010-2011 of 11 staff desktops, 44 student computers, and requests approval from the E-Team by 12/20/10.
MohamedSaleh_McMasterUniversity_Resume
An enthusiastic chemical engineering graduate, pursuing a challenging opportunity in the process and management industry
Process planning approaches
Process Planning Approaches - 1.Variant(Retrieval) Approach.
2. Generative Capp Approach.with case studies.
Computer Aided Process Planning Poster
This document discusses computer-aided process planning (CAPP). It defines process planning as the systematic determination of manufacturing methods to produce a part from raw materials to finished form. CAPP uses computers to assist process planners by storing and retrieving data, or automatically generating process plans for simple shapes. There are two main CAPP approaches: the variant approach retrieves existing generic plans and edits them, while the generative approach creates new plans from scratch without human intervention. Both have advantages like reduced planning time and costs, but the generative approach can plan new parts more easily and provide detailed automation control information.
Chazapis Commissioning: are you interested in?
This document discusses the benefits of commissioning for building owners and operators. Commissioning can help save energy and improve indoor air quality. It is required for LEED certification and can help evaluate building performance after occupancy. Commissioning procedures should be discussed with consultants. The document suggests that commissioning may be of interest for facilities management, integrating internet of things technologies, achieving high performance buildings, energy savings performance contracting, reducing operating expenses, and implementing an ISO 50001 energy management system.
What's hot (20)
Similar to 17.11.2016 fm design chazapis presentation
Energy efficiency services by Greenleaf
Greenleaf Green Solutions is an energy consulting firm that helps clients improve energy efficiency and reduce costs through audits, modeling, and management systems. They have experts across engineering, energy, finance, and management who develop customized solutions. Their process involves comprehensive audits to identify savings opportunities, modeling to estimate performance and costs, and an energy management system to implement recommendations and achieve certification. Their goal is to deliver simplified and cost-effective ways for clients to save on energy.
Chazapis cx for better buildings
It is a short reference of all required steps and Workforce needed to achieve a Better Building Construction udefull for years.
Current Capabilities Presentation 050416
ReCon is an engineering, field services, and inspection company with approximately 350 employees and over $40 million in annual revenues. Over the past 20 years, ReCon has completed over 500 projects per year for various industries, and has over 4 million man-hours without a lost time incident. ReCon provides multi-disciplinary engineering, project management, inspection, and in-plant support services to meet clients' needs.
Software Architecture – Centric Methods and Agile Development
Feedback – Not just for stereos anymore
Adaptable – Just in case you haven’t made up your mind
Simplicity – Let’s keep it that way
Small Groups – Because the boss is cheap
Using lean to reduce prototype lead time 2006
The document discusses Watlow Batavia's efforts to reduce lead times for custom heating part prototypes from 12 weeks to 6 weeks using Lean concepts. It outlines four Kaizen events from 2003-2006 that standardized processes, created dedicated prototype cells, and reduced waste. As a result, productivity increased 34% from 2003-2006, sales doubled, and lead times were cut in half, improving competitiveness and ensuring the division's survival.
Novacom Turn Key
This presentation outlines a turn-key site development and construction service. It provides (1) site development, engineering, permitting, and construction management services; (2) goals of meeting submittal deadlines, eliminating cost overruns, and performance-based pricing; and (3) a team with over 30 years of experience across civil engineering, environmental compliance, surveying, design, construction, and concealment.
Experienced Sourcing professional with 10years Exp- Material/vendor Management
Sourcing professional with 10 years Experience Looking for Challenging roles in Material management/vendor management/SCM areas
Asset Managment
The document discusses asset management programs for facilities. It outlines key phases of operations and maintenance programs including planning, initiating work like preventative maintenance, measuring key performance indicators, analyzing results, and adjusting programs based on continuous improvement. The types of maintenance covered are preventative, reactive/corrective, reliability centered, and predictive maintenance. Benefits of effective asset management programs include risk mitigation, failure avoidance, customer satisfaction, and increased reliability and equipment life. Retro-commissioning and continuous commissioning are also discussed.
2: Introduction to Energy Audit Methods in Water Supply
An investment grade audit provides a more detailed analysis than a typical energy audit by evaluating the technical and economic feasibility of potential energy efficiency projects. It establishes an energy baseline, identifies energy saving opportunities, and provides detailed cost-benefit analyses to help customers determine which projects to implement. The audit results can then be used to negotiate a performance-based contract to design, install, commission and monitor the recommended projects over time through measurement and verification of energy savings.
OnePM - Project Management System
OnePM is a project management system built on popular technologies like MS Project, PMP, Kanban, and Outlook. It allows for department users to report task statuses through Outlook while accessing shared online reports through Excel. Some key features include monitoring critical paths and deadlines, forecasting order feasibility, tracking resource workload across projects, and generating customizable dashboard and operational reports. It aims to help customers achieve satisfaction by delivering projects on time and on budget using existing server hardware and software licenses at a low price.
Chazapis cx for better buildings rev
Better Buildings initiative, Systems commissioning, Better building workforce, Lower construction costs, Commissioning process, Commissioning for Green Bulding,
Concurrent Engineering – Breaking down the silos
This document discusses concurrent engineering and its advantages over traditional sequential engineering approaches. Concurrent engineering involves simultaneous engineering activities that lead to higher quality designs and more efficient processes. Benefits include reduced time to market, ensuring design goals are met, and lower costs. Traditional approaches where different groups work sequentially have resulted in delays, scope changes, and integration issues. The document provides examples of pharmaceutical projects that experienced challenges due to the traditional approach and advocates for concurrent engineering best practices where process and automation are designed together. This leads to robust systems designed to meet business objectives and enables flexibility.
The five core processes: Service transition
Service Transition is the third core ITIL process. It ensures new, modified, or retired services meet business expectations by managing the change of state in a service's lifecycle. Key activities include transition planning and support, service asset and configuration management, knowledge management, change management, change evaluation, release and deployment management, and service validation and testing. Change management in particular ensures changes are properly recorded, evaluated, authorized, planned, tested, implemented, and reviewed. Release and deployment management handles building, testing, and deploying approved changes into production with minimal disruption.
Senior Project and Engineering Leader Jim Smith.pdf
I am a Project and Engineering Leader with extensive experience as a Business Operations Leader, Technical Project Manager, Engineering Manager and Operations Experience for Domestic and International companies such as Electrolux, Carrier, and Deutz. I have developed new products using Stage Gate development/MS Project/JIRA, for the pro-duction of Medical Equipment, Large Commercial Refrigeration Systems, Appliances, HVAC, and Diesel engines.
My experience includes:
Managed customized engineered refrigeration system projects with high voltage power panels from quote to ship, coordinating actions between electrical engineering, mechanical design and application engineering, purchasing, production, test, quality assurance and field installation. Managed projects $25k to $1M per project; 4-8 per month. (Hussmann refrigeration)
Successfully developed the $15-20M yearly corporate capital strategy for manufacturing, with the Executive Team and key stakeholders. Created project scope and specifications, business case, ROI, managed project plans with key personnel for nine consumer product manufacturing and distribution sites; to support the company’s strategic sales plan.
Over 15 years of experience managing and developing cost improvement projects with key Stakeholders, site Manufacturing Engineers, Mechanical Engineers, Maintenance, and facility support personnel to optimize pro-duction operations, safety, EHS, and new product development. (BioLab, Deutz, Caire)
Experience working as a Technical Manager developing new products with chemical engineers and packaging engineers to enhance and reduce the cost of retail products. I have led the activities of multiple engineering groups with diverse backgrounds.
Great experience managing the product development of products which utilize complex electrical controls, high voltage power panels, product testing, and commissioning.
Created project scope, business case, ROI for multiple capital projects to support electrotechnical assembly and CPG goods. Identified project cost, risk, success criteria, and performed equipment qualifications. (Carrier, Electrolux, Biolab, Price, Hussmann)
Created detailed projects plans using MS Project, Gant charts in excel, and updated new product development in Jira for stakeholders and project team members including critical path.
Great knowledge of ISO9001, NFPA, OSHA regulations.
User level knowledge of MRP/SAP, MS Project, Powerpoint, Visio, Mastercontrol, JIRA, Power BI and Tableau.
I appreciate your consideration, and look forward to discussing this role with you, and how I can lead your company’s growth and profitability. I can be contacted via LinkedIn via phone or E Mail.
Jim Smith
678-993-7195
jimsmith30024@gmail.com
commissioning-PEG Engineering profile.pdf
The document discusses the commissioning process for new facilities. It defines commissioning and its purpose to ensure building systems meet the owner's requirements. It outlines the commissioning process, including developing owner's project requirements and a basis of design, reviewing designs, creating test plans and manuals, and following up after occupancy. The benefits of commissioning are improved system performance, indoor air quality, energy efficiency, and lower lifetime costs. Costs for commissioning range from 0.5-2.5% of construction costs depending on the project scope.
Perdue Farms Experience
The candidate held the role of Refrigeration & Utility Manager at Perdue Farms, overseeing 16 direct reports and 32 indirect reports. Their responsibilities included writing standard operating procedures, leading production mechanics in the absence of supervisors, implementing continuous process improvements, developing training programs for refrigeration technicians, ensuring compliance with USDA and NFPA regulations, and planning and executing ammonia refrigeration and utility systems. They also managed facilities maintenance, associate evaluations, budgets, and acted as an incident commander when needed.
APQP-PPAP[1].ppt for engineering products
The document provides information on APQP (Advanced Product Quality Planning) and PPAP (Production Part Approval Process). It discusses the key elements and phases of APQP including planning, product design, process design, validation, and feedback. It describes how APQP links different quality tools like PFMEAs, control plans, work instructions. It then explains the purpose and scope of PPAP, which involves submitting production parts and associated documentation to prove the production process is capable of meeting customer requirements prior to shipping parts. The document outlines the typical elements included in a PPAP submission like a control plan, process FMEA, measurement systems analysis, and production trial run results.
vijay resume final
Vijay Kumar Thakur has over 6 years of experience in project execution and operations and maintenance of blast furnace utilities like blowers and pumps. He holds an M.Tech from IIT Kharagpur and a B.E from Pt. Ravishankar Shukla University. Currently he works as the Manager - Maintenance at Electrosteel Casting Ltd. in Kolkata, where he is responsible for maintenance planning and activities, predictive maintenance using techniques like vibration analysis, and ensuring adherence to quality and environmental standards. He has expertise in areas like preventive maintenance, safety operations, team management and cost monitoring.
Lecture 8 monitoring & controlling (1)
The document discusses monitoring and controlling construction projects. It describes monitoring as collecting and measuring performance information to assess results, while controlling involves taking corrective or preventive actions. The key aspects that must be monitored and controlled are project scope, time/schedule, cost, and quality. This includes tracking progress, managing changes, updating plans and documents, and identifying variances. The roles and responsibilities of the project manager, project team, client, consultants and contractors are also outlined.
Presentation1
The document discusses the design, construction, commissioning, and qualification of critical utility systems for production facilities. It outlines key phases including establishing user requirement specifications, design specifications and reviews, commissioning activities, and an integrated validation approach. Critical utility systems discussed include HVAC, purified water, WFI, and CIP systems. The role of qualification in verifying system performance is also covered.
Similar to 17.11.2016 fm design chazapis presentation (20)
Software Architecture – Centric Methods and Agile Development
Software Architecture – Centric Methods and Agile Development
Experienced Sourcing professional with 10years Exp- Material/vendor Management
Experienced Sourcing professional with 10years Exp- Material/vendor Management
2: Introduction to Energy Audit Methods in Water Supply
2: Introduction to Energy Audit Methods in Water Supply
Senior Project and Engineering Leader Jim Smith.pdf
Senior Project and Engineering Leader Jim Smith.pdf
More from Nicholas Chazapis
Chazapis the automated bldg
The document discusses key performance indicators (KPIs) for an automated building, including energy performance, plant monitoring, and comfort conditions. It outlines tracking seasonal energy efficiency ratios and complaints of spaces being too hot or too cold. Plant monitoring KPIs include electric motor operating hours, starts per hour, and maintenance costs broken down by type. Energy performance is optimized by matching installed cooling and heating capacity to loads based on maximum and minimum outdoor temperatures.
Systems trg syllabus
This presentation comes from the Building Commissioning process. It gives attention to the training requirements and defines the training sessions of the syllabus.
Predictive maintenance of an intelligent FCU
This document discusses predictive maintenance of an intelligent fan coil unit. An intelligent fan coil unit has additional sensors beyond standard units, including air velocity sensors and inlet/outlet water coil temperature sensors. Predictive maintenance of the intelligent unit monitors delta T, approach temperature, and temperature cross of the coil to check performance. It also monitors air filter life. This strategy aims to reduce maintenance costs and time by 67% or more by scheduling maintenance only when needed based on sensor data.
Chazapis cx management
The document discusses testing and commissioning of automatic controls systems (BACS) written by Nicholas A. Chazapis, a commissioning consultant based in Athens, Greece. It provides information over 7 pages on ensuring automatic controls systems are properly tested and commissioned before being used. The document aims to guide readers on evaluating if BACS are working correctly before system handover.
HVAC equipment and systems optimization for efficiency
Optimize selection of equipment on design criteria. Optimize systems operation on control strategy with the help of BMS and online portal for easy access on efficiency indices.
Chazapis cx for better buildings rev2
This document discusses commissioning for better buildings. It outlines the key aspects of commissioning including project management, design, construction, occupancy, renovation, and reconstruction. It also discusses workforce guidelines developed by the DOE and NIBS for commercial building energy auditor, commissioning professional, energy manager, and building operations professional. The document concludes by stating commissioning is important for better buildings in the future and provides contact information for more details.
2016 chazapis energy - efficiency - comfort - iso 50001
Future building management systems, iso 50001, indoor air quality, energy conservation meters, energy efficiency measures,
Chazapis Systems Commissioning Lessons.
This is a series of lessons for the Building systems Commissioning process from Design to Construction an Occupancy phase.
Chazapis Systems Commissioning Lessons.
The document outlines the key steps and goals of the building systems commissioning process. It discusses establishing owner's project requirements and a commissioning plan at the beginning. During construction, it involves design reviews, testing checks, and resolving issues. Training on building operations occurs before occupancy. A final commissioning report is delivered 18-24 months later to evaluate building performance. The overall goal is to enhance delivery and ensure all systems meet the owner's needs.
Chazapis pm basics
Learn how to be sucessful when you plan a project and manage resources. Be happy to see how Jesus Christ will bless your schedule and work breakdown structure.
Cx a activities flow diagram en
The document outlines the key activities of a commissioning authority (CxA) during different project phases including design, construction, and acceptance. During design, the CxA obtains the project design intent and develops the commissioning plan. In construction, the CxA reviews documents, conducts meetings, and oversees equipment startup and functional performance testing. Finally, the CxA administers functional performance tests, documents results, and submits a final commissioning report upon project acceptance.
BMS COMMISSIONING CODE C_CIBSE
This code deals with the work satges required to commission automatic control systems in HVAC constuction industry. Represents standards for good practice in the form of recomantations and guidance. Is applicable for stand alone, BMS, DDC networked DDC and Integrated BMS systems.
EMPATHY IN PROJECT MANAGEMENT EL V20100915
While empathy is a right brain activity, it is far from being a touchy-feely topic. At its core, empathy is the oil that keeps relationships running smoothly.
Chazapis elot en 15232 the impact of bacs - preso
This document summarizes the Greek standard ELOT EN 15232, which specifies the impact of building automation and control systems (BACS) and technical building management (TBM) on the energy performance of buildings. It defines efficiency classes for BACS/TBM from A to D, with class A being the most efficient. It also provides factors to estimate the potential energy savings from higher BACS/TBM classes for different building types and energy systems like heating, cooling, lighting and more. The standard aims to help assess and improve the energy efficiency of buildings through optimizing control systems and facility management.
Chazapis HVAC SYSTEMS COMMISSIONING A PROJECT MANAGEMENT TOOL
www.commissioning.gr
A presentation showing many european standards on efficient selection and application of HVAC equipment. The performance of the systems on site, is measured and documented through the Commissioning process.
Commissioning for energy saving nha
To get results on energy saving strategies all you need is a process called Commissioning. Whatever advanced is the technology you need a project based Commissioning process to verify and document performance and metrics.
More from Nicholas Chazapis (16)
HVAC equipment and systems optimization for efficiency
HVAC equipment and systems optimization for efficiency
2016 chazapis energy - efficiency - comfort - iso 50001
2016 chazapis energy - efficiency - comfort - iso 50001
Chazapis HVAC SYSTEMS COMMISSIONING A PROJECT MANAGEMENT TOOL
Chazapis HVAC SYSTEMS COMMISSIONING A PROJECT MANAGEMENT TOOL
Recently uploaded
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaDfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Recently uploaded (20)
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
17.11.2016 fm design chazapis presentation
- 1. Facility Management Design: a core process for experts. Nicholas Chazapis Mechanical Engineer Commissioning & FM Consultant
- 2. Commissioning for new construction • Owner project requirements • Basis of Design • Commissioning Plan • Commissioned systems • Pre-commissioning work sheets • Functional performance tests • Acceptance & Commissioning Report • Systems Manual & Training
- 3. Re-commissioning after 3-5 years • Overview Owner project requirements • Overview Basis of Design • Overview Commissioning Report • Audit and Survey – Operations – Energy consumption – Operators training – Maintenance & replacement costs
- 4. Re-commissioning after 3-5 years • …. Continued • Fault detection and diagnostics • Re-commissioning plan • Functional performance tests • Acceptance • Update Systems Manual • Training
- 5. Retro-commissioning for EB • A systematic process for improving and optimization building performance in an existing building that has never gone through any type of commissioning or quality assurance process.
- 6. Standard Facilities Management • Facility planning and operations. • Equipment Maintenance. • Security. • Catering. • Janitorial. • Office services. • Minor retrofit projects.
- 7. Facilities management Design • Reduction in energy costs … • Reduction in water costs … • Reduction in Maintenance cost … • Reduction in HVAC replacement costs … • Increase in productivity! • Increase indoor air quality! • Increase staff comfort!
- 8. END OF PRESENTATION Facility Management Design: a core process for experts