Sami Uddin Ahmed Zia resume1
•
0 likes•107 views
Sami Uddin Ahmed Zia is seeking a job that provides growth, excellence and job satisfaction. He has a BS in Electronics with Industrial Automation from Sir Syed University of Engineering and Technology and is pursuing an MBA in International Business and Marketing Management from IQRA University. He has over 10 years of experience in maintenance, troubleshooting, installation and calibration of process instrumentation as well as design, engineering and commissioning of automation systems using DCS, PLCs and HMIs. His skills include management, analytical abilities, communication, and computer skills.
Report
Share
Report
Share
Download to read offline
Recommended
CV D. Maimbolwa
Maimbolwa David Muhau has over 20 years of experience in reliability engineering and maintenance management. He has worked in various roles optimizing asset performance and maintenance practices in the mining industry. Some of his responsibilities have included developing maintenance strategies, procedures, and schedules to improve reliability. He is also experienced in planning and executing projects to address equipment issues and improve plant performance. Maimbolwa has strong skills in computerized maintenance management systems and reliability engineering techniques.
Computer Aided Process Planning (CAPP)
This document provides an overview of Computer Aided Process Planning (CAPP). It discusses the general steps in CAPP, including design input, material selection, and cost estimation. It describes two main approaches to CAPP: variant CAPP, which retrieves and modifies existing process plans; and generative CAPP, which generates new plans using decision logic and algorithms. The advantages of CAPP are reducing time/costs and increasing consistency and productivity. The disadvantages include difficulty maintaining consistency and accounting for all manufacturing factors in variant CAPP, and high initial costs compared to manual planning.
CAPP and Curriculum Management at HCT
The document discusses curriculum management at the Higher Colleges of Technology in the United Arab Emirates. It describes how CAPP and the Curriculum Management System are used to define programs, attach requirements, and perform degree audits in Banner. It also discusses different types of course equivalencies and provides advice on best practices for curriculum development.
Blackburn, Kevin_12_9_16
Kevin Blackburn is an EAM Functional Specialist with 13 years of experience implementing and supporting Computerized Maintenance Management Systems (CMMS) like MAXIMO. He has experience building asset hierarchies, developing maintenance plans and schedules, creating reports, and providing training. He has worked with various oil and gas companies to implement MAXIMO and standardize maintenance processes.
System maintenance
This document discusses system maintenance and post-implementation activities. It describes three types of post-implementation activities: system support, system maintenance, and project support. System support involves helping users operate the new system through help desks, FAQs, and training. System maintenance aims to ensure the system continues meeting needs and involves three types: corrective maintenance which repairs equipment; preventive maintenance like scheduled upkeep to prevent issues; and predictive maintenance using inspections to predict needed repairs. The document provides details on benefits and examples of each maintenance type.
New Resume
Marc Brown is seeking a position as a Maintenance Planner Scheduler/Supervisor. He has a diploma from Augusta Technical College in Industrial Maintenance with a minor in Electronic Fundamentals. Brown has experience leading a maintenance team, managing maintenance metrics, conducting data analysis, and troubleshooting PLC and conveyor systems. He currently works as a Planner Scheduler where he assists with maintenance operations, supervision, and parts management.
Mohd Yatim Muslim_Resume
This document provides a summary of Mohd Yatim Bin Muslim's qualifications and experience. It includes his personal details, education history with a Bachelor's Degree in Mechanical Engineering, certifications, career objectives seeking a role as a maintenance, project, technical or E&I engineer. It also outlines his previous work experience including roles as a facilities engineer and maintenance/mechanical engineer trainee. Skills include English, AutoCAD, preventative maintenance, electrical and air conditioning knowledge.
Duties
This document outlines the duties of a facilities engineer. The engineer troubleshoots solutions for maintenance issues, manages quality assurance inspections of preventative maintenance programs, and monitors mechanical systems to ensure contractors properly operate and maintain the systems. Additionally, the engineer creates technical scopes of work, cost estimates, and determines construction details for repair and replacement projects. They also collaborate with customers to translate requirements into mechanical and HVAC solutions.
Recommended
CV D. Maimbolwa
Maimbolwa David Muhau has over 20 years of experience in reliability engineering and maintenance management. He has worked in various roles optimizing asset performance and maintenance practices in the mining industry. Some of his responsibilities have included developing maintenance strategies, procedures, and schedules to improve reliability. He is also experienced in planning and executing projects to address equipment issues and improve plant performance. Maimbolwa has strong skills in computerized maintenance management systems and reliability engineering techniques.
Computer Aided Process Planning (CAPP)
This document provides an overview of Computer Aided Process Planning (CAPP). It discusses the general steps in CAPP, including design input, material selection, and cost estimation. It describes two main approaches to CAPP: variant CAPP, which retrieves and modifies existing process plans; and generative CAPP, which generates new plans using decision logic and algorithms. The advantages of CAPP are reducing time/costs and increasing consistency and productivity. The disadvantages include difficulty maintaining consistency and accounting for all manufacturing factors in variant CAPP, and high initial costs compared to manual planning.
CAPP and Curriculum Management at HCT
The document discusses curriculum management at the Higher Colleges of Technology in the United Arab Emirates. It describes how CAPP and the Curriculum Management System are used to define programs, attach requirements, and perform degree audits in Banner. It also discusses different types of course equivalencies and provides advice on best practices for curriculum development.
Blackburn, Kevin_12_9_16
Kevin Blackburn is an EAM Functional Specialist with 13 years of experience implementing and supporting Computerized Maintenance Management Systems (CMMS) like MAXIMO. He has experience building asset hierarchies, developing maintenance plans and schedules, creating reports, and providing training. He has worked with various oil and gas companies to implement MAXIMO and standardize maintenance processes.
System maintenance
This document discusses system maintenance and post-implementation activities. It describes three types of post-implementation activities: system support, system maintenance, and project support. System support involves helping users operate the new system through help desks, FAQs, and training. System maintenance aims to ensure the system continues meeting needs and involves three types: corrective maintenance which repairs equipment; preventive maintenance like scheduled upkeep to prevent issues; and predictive maintenance using inspections to predict needed repairs. The document provides details on benefits and examples of each maintenance type.
New Resume
Marc Brown is seeking a position as a Maintenance Planner Scheduler/Supervisor. He has a diploma from Augusta Technical College in Industrial Maintenance with a minor in Electronic Fundamentals. Brown has experience leading a maintenance team, managing maintenance metrics, conducting data analysis, and troubleshooting PLC and conveyor systems. He currently works as a Planner Scheduler where he assists with maintenance operations, supervision, and parts management.
Mohd Yatim Muslim_Resume
This document provides a summary of Mohd Yatim Bin Muslim's qualifications and experience. It includes his personal details, education history with a Bachelor's Degree in Mechanical Engineering, certifications, career objectives seeking a role as a maintenance, project, technical or E&I engineer. It also outlines his previous work experience including roles as a facilities engineer and maintenance/mechanical engineer trainee. Skills include English, AutoCAD, preventative maintenance, electrical and air conditioning knowledge.
Duties
This document outlines the duties of a facilities engineer. The engineer troubleshoots solutions for maintenance issues, manages quality assurance inspections of preventative maintenance programs, and monitors mechanical systems to ensure contractors properly operate and maintain the systems. Additionally, the engineer creates technical scopes of work, cost estimates, and determines construction details for repair and replacement projects. They also collaborate with customers to translate requirements into mechanical and HVAC solutions.
khalid CV 2015
Khalid Waleed Abdul-Aziz is seeking a new opportunity and has over 8 years of experience in maintenance planning, asset management, and Maximo implementation at GASCO in Abu Dhabi, UAE. He has a background in computer science and project management and is skilled in areas like strategic planning, process automation, training, and team leadership. The document provides details of his work history, qualifications, and areas of expertise to support his objective of finding an organization where he can succeed and contribute to collective success.
Computer Aided Process Planning Poster
This document discusses computer-aided process planning (CAPP). It defines process planning as the systematic determination of manufacturing methods to produce a part from raw materials to finished form. CAPP uses computers to assist process planners by storing and retrieving data, or automatically generating process plans for simple shapes. There are two main CAPP approaches: the variant approach retrieves existing generic plans and edits them, while the generative approach creates new plans from scratch without human intervention. Both have advantages like reduced planning time and costs, but the generative approach can plan new parts more easily and provide detailed automation control information.
Computer aided process planning
This document is a seminar report on computer aided process planning submitted by Jashid P.P. to the Department of Electronics and Instrumentation Engineering at KMCT Polytechnic College. It includes an abstract that provides an overview of computer aided process planning and its importance. It also includes chapters that cover topics like process planning, computer aided process planning, group technology, literature on CAPP methodology and applications, benefits of CAPP, and conclusions. The report is certified by the head of the department and includes acknowledgements and contents pages.
Raymond Mike Samworth Resume
Raymond Samworth has over 15 years of experience in quality control and inspection planning. He is a Six Sigma Green Belt with experience developing inspection plans, FMEA, PFMEA, and APQP processes. He has programming experience with contact and non-contact inspection methods and is proficient in GD&T, 5S principles, blueprint reading, and troubleshooting. Currently pursuing certification as a Quality Engineer, he has been involved in equipment evaluation, supplier improvement activities, and training program development.
AVP
- The document describes the duties and responsibilities of a Core Banking Application Development Manager. This includes managing development teams supporting core banking applications, participating in projects involving the core banking system, gathering and documenting user requirements, and ensuring systems are operating effectively and meeting service level agreements. The role also involves analyzing issues, proposing solutions, and reporting on projects and team performance to the Vice President.
Capp
The document discusses computer aided process planning (CAPP). CAPP uses computer technology to aid in process planning for manufacturing a part. It provides the link between computer aided design (CAD) and computer aided manufacturing (CAM) by planning the manufacturing process for a designed part. There are two main approaches to CAPP - variant process planning, which modifies standard process plans, and generative process planning, which automatically generates custom process plans using part geometry and manufacturing knowledge. CAPP offers benefits like increased productivity, consistency, accuracy, and reduced costs and lead times compared to manual process planning.
MOE, MOP, TPM and the IMP/IMS
The Integrated Master Plan and Integrated Master Schedule are homes for the Measures of Effectiveness (MOE), Measures of Performance (MOP), and Technical Performance Measures (TPM) for the program
Each measure is derived from the Systems Engineering processes guided by the Systems Engineering Management Plan (SEMP) and the decomposition of the program's technical architecture.
INCOSE Systems Engineering Handbook and ISO 15288 provide the framework for this decomposition.
Estimating Software Maintenance Costs
Software maintenance typically requires 40-60% of the total lifecycle effort for a software product, with some cases requiring as much as 90%. A widely used rule of thumb is that maintenance activities are distributed as 60% for enhancements, 20% for adaptations, and 20% for corrections. Studies show the typical level of effort devoted to software maintenance is around 50% of the total lifecycle effort. Boehm suggests measuring maintenance effort using an activity ratio that considers the number of instructions added or modified over the total instructions. The effort required can then be estimated using programmer months based on the activity ratio and an effort adjustment factor. Emphasis on reliability during development can reduce future maintenance effort.
Mishal AlDelaigan_CV
This document provides a summary of Mishal F. Al-Delaigan's work experience and qualifications. He has over 20 years of experience in maintenance planning and asset management, including current roles as Smelter Maintenance Planning Superintendent at Ma'aden Aluminum and previous roles in maintenance planning and asset management at Hadeed SABIC. He has extensive training and experience working with SAP and Oracle eAM/Viziya eAM software.
Bob Kendall Resume 2015 current
The document is a resume for Robert T. Kendall providing summaries of his experience and qualifications for a facilities manager position. It outlines his objective to utilize leadership and mechanical experience to optimize operations. It then details over 30 years of experience in facilities management, maintenance management, and operations roles for various companies. His technical skills and experience include CMMS programs, budgeting, electrical and mechanical systems, and he has managed facilities ranging from 155,000 to 190,000 square feet.
Capp
This document discusses Computer Aided Process Planning (CAPP). CAPP systems automate the process of generating route sheets that list the sequence of operations required to manufacture a product. This helps standardize plans and reduce inconsistencies compared to manual process planning. CAPP integrates with CAD and CAM systems to facilitate the connection between design and manufacturing. There are two main types of CAPP systems - retrieval CAPP systems that modify existing plans, and generative CAPP systems that automatically generate new plans based on part data and decision rules.
Bse 3105 lecture 3-software evolution planning
1. Evolution planning involves justifying an approach to transforming a system through activities like identifying candidate systems for evolution, determining feasibility and costs, and formulating the best strategy.
2. Evolution strategies include continued maintenance, reengineering, or replacement depending on feasibility and costs. Reengineering transforms a system while replacement introduces a new system.
3. Developing an evolution plan requires estimating costs and risks, performing cost-benefit analyses to compare strategies, and planning the process to coordinate resources and activities.
Vladimir Nikitin - Completed CV
Vladimir Nikitin is a Russian instrumentation professional seeking a position as an Instruments Engineer or Supervisor. He has over 20 years of experience in instrumentation, maintenance, repair, and project management. His strengths include motivating teams, effective communication, analyzing technical problems, and building long-lasting relationships. Nikitin holds degrees in finance and instrumentation engineering and certifications in safety rules. He is proficient in instrumentation, automation, programming, and systems maintenance.
Mohamad Husni_Resume
This document contains a resume for Mohammad Husni Bin Abdullah Zawawi. It summarizes his personal details, education, certifications, career objectives, and employment history. His most recent role was as a Planner/Scheduler for Newwin Engineering Sdn Bhd, where he was responsible for preparing schedules and monitoring projects. He has over 5 years of experience in planning, scheduling, and testing roles in the oil and gas and automotive industries.
CAPP , JIT, FMS
Computer Aided Process Planning (CAPP): concepts; traditional and CAPP; automated
process planning: process planning, general methodology of group technology, code
structures of variant and generative process planning methods, AI in process planning,
process planning software.
Flexible Manufacturing Systems (FMS): Introduction, types, concepts, need and
advantages of FMS - cellular and FMS - JIT and GT applied to FMS.
Unit 4
The document discusses various production scheduling concepts and methods. It describes the loading and scheduling process, which involves determining the work required, computing total time needed, and adding it to existing workplans. Scheduling then determines operation start/finish times. Master scheduling and Gantt charts are also referenced. Benefits of scheduling include reduced inventory and setups. MRP, Kanban, dispatching, progress reporting and expediting are additionally summarized.
Projects DWDobbs 2016a
Dennis Dobbs has over 15 years of experience providing engineering solutions to improve plant operations and maintenance programs. He has worked with several companies, including Ross Technical Services, Arlington County Water Pollution Control Bureau, Mantec, Inc., Jacobs-Sirrine Engineers, P. T. Alas Buana Raya, Fluor Daniel, and Alcoa. Some of his responsibilities have included developing predictive maintenance programs, creating performance reports, analyzing maintenance management strategies, and providing training. He has helped clients improve key metrics like PM execution, schedule compliance, and emissions reductions.
Unit 2
The document discusses work study and method study. It defines them, outlines their objectives and basic procedures. Work study aims to utilize resources efficiently while method study examines work processes to develop more effective methods. The key steps in method study are selecting work, recording the current method, examining it critically, developing an improved method, defining and installing the new method, and maintaining it. Various charts and diagrams used in method study are also described such as process charts, flow diagrams and string diagrams.
Computer Aided Process Planning (CAPP)
Computer-aided process planning (CAPP) is the application of computers to assist process planners in planning functions. CAPP integrates computer-aided design (CAD) and computer-aided manufacturing (CAM) by providing a direct connection between design and manufacturing. There are two main approaches to CAPP: variant process planning and generative process planning. Variant process planning retrieves and modifies standard process plans from a database, while generative process planning creates customized process plans using decision logic and part geometry data without predefined plans. CAPP provides benefits like increased productivity, consistency of plans, accuracy of plans, and reduced costs.
COMPUTER AIDED PROCESS PLANNING (CAPP)
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
Mujeres arte actividad 1
The document lists the names of several artists including Edoard Manet, Frida Kahlo, ALONSO MURILLO, Liliana Porter, DÍAZ MONSY, Carolina Antoniadis, Grupo Mondongo, and FERNAND LEGER. It appears to be a list of artists but provides no other context about them or their works.
More Related Content
What's hot
khalid CV 2015
Khalid Waleed Abdul-Aziz is seeking a new opportunity and has over 8 years of experience in maintenance planning, asset management, and Maximo implementation at GASCO in Abu Dhabi, UAE. He has a background in computer science and project management and is skilled in areas like strategic planning, process automation, training, and team leadership. The document provides details of his work history, qualifications, and areas of expertise to support his objective of finding an organization where he can succeed and contribute to collective success.
Computer Aided Process Planning Poster
This document discusses computer-aided process planning (CAPP). It defines process planning as the systematic determination of manufacturing methods to produce a part from raw materials to finished form. CAPP uses computers to assist process planners by storing and retrieving data, or automatically generating process plans for simple shapes. There are two main CAPP approaches: the variant approach retrieves existing generic plans and edits them, while the generative approach creates new plans from scratch without human intervention. Both have advantages like reduced planning time and costs, but the generative approach can plan new parts more easily and provide detailed automation control information.
Computer aided process planning
This document is a seminar report on computer aided process planning submitted by Jashid P.P. to the Department of Electronics and Instrumentation Engineering at KMCT Polytechnic College. It includes an abstract that provides an overview of computer aided process planning and its importance. It also includes chapters that cover topics like process planning, computer aided process planning, group technology, literature on CAPP methodology and applications, benefits of CAPP, and conclusions. The report is certified by the head of the department and includes acknowledgements and contents pages.
Raymond Mike Samworth Resume
Raymond Samworth has over 15 years of experience in quality control and inspection planning. He is a Six Sigma Green Belt with experience developing inspection plans, FMEA, PFMEA, and APQP processes. He has programming experience with contact and non-contact inspection methods and is proficient in GD&T, 5S principles, blueprint reading, and troubleshooting. Currently pursuing certification as a Quality Engineer, he has been involved in equipment evaluation, supplier improvement activities, and training program development.
AVP
- The document describes the duties and responsibilities of a Core Banking Application Development Manager. This includes managing development teams supporting core banking applications, participating in projects involving the core banking system, gathering and documenting user requirements, and ensuring systems are operating effectively and meeting service level agreements. The role also involves analyzing issues, proposing solutions, and reporting on projects and team performance to the Vice President.
Capp
The document discusses computer aided process planning (CAPP). CAPP uses computer technology to aid in process planning for manufacturing a part. It provides the link between computer aided design (CAD) and computer aided manufacturing (CAM) by planning the manufacturing process for a designed part. There are two main approaches to CAPP - variant process planning, which modifies standard process plans, and generative process planning, which automatically generates custom process plans using part geometry and manufacturing knowledge. CAPP offers benefits like increased productivity, consistency, accuracy, and reduced costs and lead times compared to manual process planning.
MOE, MOP, TPM and the IMP/IMS
The Integrated Master Plan and Integrated Master Schedule are homes for the Measures of Effectiveness (MOE), Measures of Performance (MOP), and Technical Performance Measures (TPM) for the program
Each measure is derived from the Systems Engineering processes guided by the Systems Engineering Management Plan (SEMP) and the decomposition of the program's technical architecture.
INCOSE Systems Engineering Handbook and ISO 15288 provide the framework for this decomposition.
Estimating Software Maintenance Costs
Software maintenance typically requires 40-60% of the total lifecycle effort for a software product, with some cases requiring as much as 90%. A widely used rule of thumb is that maintenance activities are distributed as 60% for enhancements, 20% for adaptations, and 20% for corrections. Studies show the typical level of effort devoted to software maintenance is around 50% of the total lifecycle effort. Boehm suggests measuring maintenance effort using an activity ratio that considers the number of instructions added or modified over the total instructions. The effort required can then be estimated using programmer months based on the activity ratio and an effort adjustment factor. Emphasis on reliability during development can reduce future maintenance effort.
Mishal AlDelaigan_CV
This document provides a summary of Mishal F. Al-Delaigan's work experience and qualifications. He has over 20 years of experience in maintenance planning and asset management, including current roles as Smelter Maintenance Planning Superintendent at Ma'aden Aluminum and previous roles in maintenance planning and asset management at Hadeed SABIC. He has extensive training and experience working with SAP and Oracle eAM/Viziya eAM software.
Bob Kendall Resume 2015 current
The document is a resume for Robert T. Kendall providing summaries of his experience and qualifications for a facilities manager position. It outlines his objective to utilize leadership and mechanical experience to optimize operations. It then details over 30 years of experience in facilities management, maintenance management, and operations roles for various companies. His technical skills and experience include CMMS programs, budgeting, electrical and mechanical systems, and he has managed facilities ranging from 155,000 to 190,000 square feet.
Capp
This document discusses Computer Aided Process Planning (CAPP). CAPP systems automate the process of generating route sheets that list the sequence of operations required to manufacture a product. This helps standardize plans and reduce inconsistencies compared to manual process planning. CAPP integrates with CAD and CAM systems to facilitate the connection between design and manufacturing. There are two main types of CAPP systems - retrieval CAPP systems that modify existing plans, and generative CAPP systems that automatically generate new plans based on part data and decision rules.
Bse 3105 lecture 3-software evolution planning
1. Evolution planning involves justifying an approach to transforming a system through activities like identifying candidate systems for evolution, determining feasibility and costs, and formulating the best strategy.
2. Evolution strategies include continued maintenance, reengineering, or replacement depending on feasibility and costs. Reengineering transforms a system while replacement introduces a new system.
3. Developing an evolution plan requires estimating costs and risks, performing cost-benefit analyses to compare strategies, and planning the process to coordinate resources and activities.
Vladimir Nikitin - Completed CV
Vladimir Nikitin is a Russian instrumentation professional seeking a position as an Instruments Engineer or Supervisor. He has over 20 years of experience in instrumentation, maintenance, repair, and project management. His strengths include motivating teams, effective communication, analyzing technical problems, and building long-lasting relationships. Nikitin holds degrees in finance and instrumentation engineering and certifications in safety rules. He is proficient in instrumentation, automation, programming, and systems maintenance.
Mohamad Husni_Resume
This document contains a resume for Mohammad Husni Bin Abdullah Zawawi. It summarizes his personal details, education, certifications, career objectives, and employment history. His most recent role was as a Planner/Scheduler for Newwin Engineering Sdn Bhd, where he was responsible for preparing schedules and monitoring projects. He has over 5 years of experience in planning, scheduling, and testing roles in the oil and gas and automotive industries.
CAPP , JIT, FMS
Computer Aided Process Planning (CAPP): concepts; traditional and CAPP; automated
process planning: process planning, general methodology of group technology, code
structures of variant and generative process planning methods, AI in process planning,
process planning software.
Flexible Manufacturing Systems (FMS): Introduction, types, concepts, need and
advantages of FMS - cellular and FMS - JIT and GT applied to FMS.
Unit 4
The document discusses various production scheduling concepts and methods. It describes the loading and scheduling process, which involves determining the work required, computing total time needed, and adding it to existing workplans. Scheduling then determines operation start/finish times. Master scheduling and Gantt charts are also referenced. Benefits of scheduling include reduced inventory and setups. MRP, Kanban, dispatching, progress reporting and expediting are additionally summarized.
Projects DWDobbs 2016a
Dennis Dobbs has over 15 years of experience providing engineering solutions to improve plant operations and maintenance programs. He has worked with several companies, including Ross Technical Services, Arlington County Water Pollution Control Bureau, Mantec, Inc., Jacobs-Sirrine Engineers, P. T. Alas Buana Raya, Fluor Daniel, and Alcoa. Some of his responsibilities have included developing predictive maintenance programs, creating performance reports, analyzing maintenance management strategies, and providing training. He has helped clients improve key metrics like PM execution, schedule compliance, and emissions reductions.
Unit 2
The document discusses work study and method study. It defines them, outlines their objectives and basic procedures. Work study aims to utilize resources efficiently while method study examines work processes to develop more effective methods. The key steps in method study are selecting work, recording the current method, examining it critically, developing an improved method, defining and installing the new method, and maintaining it. Various charts and diagrams used in method study are also described such as process charts, flow diagrams and string diagrams.
Computer Aided Process Planning (CAPP)
Computer-aided process planning (CAPP) is the application of computers to assist process planners in planning functions. CAPP integrates computer-aided design (CAD) and computer-aided manufacturing (CAM) by providing a direct connection between design and manufacturing. There are two main approaches to CAPP: variant process planning and generative process planning. Variant process planning retrieves and modifies standard process plans from a database, while generative process planning creates customized process plans using decision logic and part geometry data without predefined plans. CAPP provides benefits like increased productivity, consistency of plans, accuracy of plans, and reduced costs.
COMPUTER AIDED PROCESS PLANNING (CAPP)
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
What's hot (20)
Viewers also liked
Mujeres arte actividad 1
The document lists the names of several artists including Edoard Manet, Frida Kahlo, ALONSO MURILLO, Liliana Porter, DÍAZ MONSY, Carolina Antoniadis, Grupo Mondongo, and FERNAND LEGER. It appears to be a list of artists but provides no other context about them or their works.
Top Images 2008
The document lists the top voted images from various categories on the internet for the year 2008, including best natural exterior and interior pictures, urban pictures, pictures of humans and moments captured on the spot, as well as special categories for images involving humans interacting with landscapes, animals, pets, transportation, public displays, and more, with vote percentages provided for each category. It concludes by announcing the overall prize winner for the year with the highest vote percentage.
A diferenca pede_licenca
O documento discute como as pessoas são rotuladas e colocadas em categorias desde cedo sem escolha. Defende que a diferença pede aceitação e respeito, e que todos somos seres imperfeitos aos olhos de Deus. Conclui que Jesus nos ensinou a abrir nosso coração e receber com amor todas as pessoas, independentemente de suas características.
MLT
This certificate certifies that Mr./Ms. [name] successfully completed a one year training course in medical technology from October 1998 to September 1999 at the Department of Pathology at the Aga Khan University Hospital in Karachi. The certificate is signed by the Chairman and Coordinator of the Department of Pathology.
Transgression sin iniquity
This document defines and distinguishes between transgression, sin, and iniquity. It notes that transgression is a violation of law, sin is an offense against God, and iniquity is a sin that teaches others to do the same in perpetual motion. While transgression and sin are different, transgression can become sin. Iniquity is described as a stubborn refusal to repent from transgressions that can lead to ruin if not addressed. Examples are given throughout to illustrate these key terms.
нефтесервис 2015
Нефтесервисная отрасль Казахстана: итоги 2015 года
Oilservice industry of Kazakhstan
Entrada 6
El análisis dimensional es un método que simplifica problemas matemáticos estudiando la relación entre variables y dimensiones. Se usa principalmente en física para estudiar dimensiones de manera eficiente, aunque tiene ciertas limitaciones.
Presentación2
Este documento presenta una introducción a los informes en Access y describe cómo crear un informe utilizando el asistente de informes. Explica que los informes sirven para presentar datos de una tabla o consulta de manera que sólo se puedan ver o imprimir, y que permiten agrupar y totalizar la información fácilmente. Detalla los pasos para crear un informe automático, diseñar uno en blanco o usar el asistente de informes, el cual guía el proceso paso a paso.
Carta a garcia
La carta a García habla de un hombre llamado Rowan que recibió una carta para entregarla al General García sin saber dónde estaba. Rowan no hizo preguntas y se fue a buscarlo, mostrando iniciativa y voluntad. El autor critica la falta de acción y dependencia que retrasa el progreso social. También discute el papel de los jefes que enseñan a sus empleados solo cuando los supervisan y crean una atmósfera fría.
Providencia
La Unión Europea ha acordado un paquete de sanciones contra Rusia por su invasión de Ucrania. Las sanciones incluyen restricciones a los bancos rusos, la prohibición de la venta de aviones y equipos a Rusia, y sanciones contra funcionarios rusos. Los líderes de la UE esperan que las sanciones aumenten la presión económica sobre Rusia y la disuadan de continuar su agresión contra Ucrania.
Taller slideshare web 2.0 by alvaro faraco
Este documento describe las características de la Web 2.0, incluyendo que permite a los usuarios administrar y compartir sus propios contenidos, opinar sobre los contenidos de otros, y enviar y recibir información con otras personas. También explica que la Web 2.0 permite una mayor participación de los usuarios en los contenidos a través de discusiones y compartir información sobre temas comunes. Finalmente, resume algunas características técnicas como que las páginas son dinámicas e integran recursos multimedia que pueden ser compartidos fácilmente
Developing a research strategy
The document outlines steps for developing an effective research strategy, including asking the right questions, writing an issue statement, creating a list of keywords, making a research plan, keeping a research log, and organizing saved research. Key aspects of the research process are preliminary analysis to identify relevant facts, terms, and sources, following a search strategy, and deciding when sufficient research has been completed based on time constraints, repetition of findings, thorough exploration of sources, and having addressed all questions.
Bev Resume3
Beverly McCoy is seeking a position utilizing her experience in accounting and office management. She has a Master's degree in Intervention Specialist and Bachelor's degree in Business, Accounting/Finance. Her resume lists accounting and education experience including positions as an accountant, substitute teacher, accounting instructor, and various temporary accounting roles since 1985. She provides her contact information, education history, and notes she has passed relevant exams to be a licensed teacher and is proficient in various software programs.
Irfan view effects by jegor
This document discusses several image editing effects including Black & White, 3D Button, Oil Paint, and Pixilize effects that can be applied in image editing software to alter the appearance of photos. Negative effects are also listed but no details are provided about what they involve. The document is brief and lists the effect names without descriptions of how each one transforms images.
Viewers also liked (16)
Similar to Sami Uddin Ahmed Zia resume1
Naveesh Kapoor - resume
This document is a resume for Naveesh Kapoor, an engineering management and project management professional with over 16 years of experience. It summarizes his expertise in areas like project management, engineering management, maintenance management, and team leadership. It also provides details of his past work experience managing engineering projects, maintenance operations, and utilities across various industries. Key highlights of projects executed and achievements are mentioned.
Resume +Tahir 2016
Tahir Amin is a highly motivated professional engineer with over 13 years of experience managing process control system projects from conceptualization through commissioning. He has extensive skills in project execution, cost control, engineering documentation, and mentoring junior staff. Currently, he is handling major projects including radio communication systems, natural gas metering systems, and firefighting system upgrades for Saudi Arabian companies.
Aravind resume
This document contains an individual's resume summarizing their work experience in facility management roles over the past 6 years. The resume highlights experience managing facility operations and maintenance, implementing maintenance schedules, conducting process improvements, and ensuring reliability and safety. Previous roles included facility engineer for Emrill Services in Dubai and maintenance engineer for Palm Tower in Doha and Dalkia India in Mumbai. The individual holds a BE in electrical engineering and seeks a senior or top-level role in facility management.
resume_saran
Saranraj M seeks an automation engineering position and has over 7 years of experience in maintenance engineering with expertise in PLC programming, HMI design, SCADA systems, electrical controls, and troubleshooting drives and equipment. He has a B.Tech in electrical engineering and is proficient in planning and implementing predictive, preventive, and breakdown maintenance to minimize downtime. His career has progressed from commissioning engineer to maintenance engineer to project expansion lead at Apollo Tyres Ltd where he has successfully erected and commissioned equipment, improved processes, and achieved cost savings and productivity gains.
KIRAN KUMAR BEKAL
Kiran Kumar Bekal is an experienced Electronics and Communication engineering professional with expertise in building management systems and equipment installation and commissioning. He has over 7 years of experience working on projects in Abu Dhabi and Dubai. Currently, he works as an Operations Engineer for BMS Systems at Agthia Group in Abu Dhabi, where he is responsible for system integration, commissioning, and ensuring proper maintenance of site records. Previously, he was a Project Engineer at Pacific Controls Systems, where he led HVAC project operations including inspection, testing, and commissioning. He has comprehensive technical skills including building automation systems, HVAC controllers, CCTV, and access control systems.
Senior Mechanical Engineer CV
This document is a resume for Nour Eldin Ahmed Mohamed, a Senior Mechanical Engineer with over 8 years of experience. It outlines his objective of seeking a key role utilizing his skills in engineering, procurement, and project management. It details his education, certifications, skills, work experience managing projects for companies in oil and gas, as well as achievements and responsibilities held in previous roles.
Nitin cv 25 07-16
26+ YEARS OF ENGINEERING AND DESIGN, EPCC PROJECTS , PROJECT MANAGEMENT EXPERIENCE IN THE FIELD OF INSTRUMENTATION, CONTROL AND AUTOMATION
Ahmed Mohamed Abdelkhalik Final Update CV
Ahmed Mohamed Abdelkhalik is a Senior Maintenance Planning Engineer from Alexandria, Egypt with over 10 years of experience in maintenance planning and management. His experience includes developing preventative maintenance plans, scheduling work orders, overseeing CMMS systems, and preparing progress reports. He has a B.Sc. in Mechanical Power Engineering and certifications in Primavera P6, project management, and various maintenance topics.
CV
Abhinesh Thomas is an Electrical and Instrumentation Superintendent with over 8 years of experience. He holds a B.Tech in Applied Electronics and Instrumentation. He is currently working at Global Process Systems in Abu Dhabi, where he supervises a team of engineers, foremen, and technicians. Previously he has worked on projects involving oil and gas processing, power distribution systems, control systems, and more. He has extensive experience in project installation, commissioning, engineering, and maintenance.
CV
Mohamed Abdelfattah Mohamed Omar is seeking a challenging position utilizing his seven years of experience as an instrumentation and control engineer. He has worked as an Instrumentation and Control Engineer for QARUN Petroleum Company-APACHE CORP-JV in Cairo since 2012, where his responsibilities included defining goals, providing technical support, supervising projects, and evaluating performance. Previously, he worked as a Field Engineer for QARUN Base from 2009 to 2012, where his duties involved installing, maintaining, and troubleshooting field instrumentation devices. He holds a Bachelor's degree in Communications & Electronics from Cairo University.
Selva_CV
The document is a resume for M. Selvakumar detailing his professional experience in project planning, execution, and operations roles over the past 10 years and 6 months. It provides information on his current role as Assistant Manager of Formulation Projects at Dr. Reddy's Laboratories Ltd in Hyderabad, India, where he is responsible for leading various projects involving utilities, building systems, safety, and process improvements. Previous relevant experience is also listed, including roles in project engineering at SS Automation Solutions Pvt Ltd focusing on electrical, automation, and controls systems integration.
Resume' DWDobbs 2016a
The document is a curriculum vitae for Dennis Dobbs, summarizing his professional experience and qualifications. He has over 35 years of experience in technical management, engineering, maintenance, and mechanical systems design. His most recent role was as a senior technical consultant for Ross Technical Services, where he analyzed clients' operations and maintenance strategies and provided instruction to improve predictive maintenance programs. Prior to that, he held several roles involving maintenance engineering, project management, and developing maintenance management systems to optimize efficiency and reduce costs for industrial clients.
Feed brochure6 05
Emerson provides front end engineering design (FEED) services to help customers plan automation projects. FEED involves early project planning, data collection, basis of design development, and generating estimates to reduce costs and risks. Emerson's multi-disciplinary expertise and proven FEED process help customers ensure projects meet timelines and budgets while optimizing profitability through lower capital costs and faster startup.
RAMESH BABU-CVe
S. Ramesh Babu is a senior engineer with over 25 years of experience in electrical project management, maintenance, and safety operations. He currently works for Flextronics in Chennai as a senior engineer overseeing SMT processes and maintenance. Ramesh has extensive experience designing automated panels and MCCs for various industries. He leads engineering teams to ensure smooth production and addresses quality and productivity issues. Ramesh also has experience creating procedures for new line qualifications and optimizing SMT programs.
Abdul Azeem(Mechanical Engineer ) -CV
- Mohammed Abdul Azeem is a mechanical engineer with over 6 years of experience working on HVAC projects in Saudi Arabia.
- He is currently a site engineer for an ongoing project at AL-MUAJJIZ South Terminal for Aramco, where he leads a team and oversees unit installation, duct design, and quality control.
- Azeem has extensive experience in MEP design, planning, cost estimation, procurement, and ensuring projects are completed on schedule and within budget.
Emad Bek.pdf
Emad Bek is a senior automation specialist from Saudi Arabia with over 15 years of experience in project management and engineering roles. He has a bachelor's degree in computer engineering technology and numerous certifications. Currently he is a customer project manager at Schneider Electric where he manages projects from initial planning through final invoice. Previously he held roles such as systems engineer, project manager, field service engineer, and automation project engineer on industrial automation systems.
Resume_Instrumentation Engineer_7.5 year experience
- Over 7 years of experience as an Instrument Manager at Reliance Industries Ltd in Vadodara, Gujarat, with expertise in DCS, PLC, and SCADA systems including Honeywell, Allen Bradley, and Siemens.
- Responsibilities include maintenance, testing, troubleshooting, and overseeing installation and commissioning of instrumentation.
- Holds a B.Tech in Electronics and Instrumentation from Shobhit Institute of Engineering and Technology.
Sr.Mech.Design Engr. 30.03.15
This document provides a summary of an individual's experience and qualifications. It outlines over 13 years of experience in design engineering and project management in the oil and gas industry. Areas of expertise include monitoring projects, maintenance planning, cost analysis, and improving plant reliability. Previous roles include positions as a senior mechanical design engineer and project coordinator on oil and gas projects in Kuwait.
Resume2021
Emad Bek is a senior automation specialist from Saudi Arabia with over 15 years of experience in engineering roles at Schneider Electric and other companies. He has extensive experience managing automation and industrial projects, as well as providing technical support and overseeing field service engineers. His skills include project management, electrical and automation system design, and establishing best practices for industrial processes.
My cv 016
Ibrahim Hassan Ali has over 16 years of experience in engineering roles including project director, maintenance manager, and automation manager. He currently serves as the Engineering Director for Al Bayan Holding Group in Riyadh, Saudi Arabia, where he manages industrial plants producing spiral pipes, pipe coatings, and steel structures. Previously, he held maintenance and project management roles for several industrial plants in Saudi Arabia and Egypt.
Similar to Sami Uddin Ahmed Zia resume1 (20)
Resume_Instrumentation Engineer_7.5 year experience
Resume_Instrumentation Engineer_7.5 year experience
Sami Uddin Ahmed Zia resume1
- 1. Sami Uddin Ahmed Zia 46-N Block 2 PECHS Karachi Sindh Pakistan | +923212005443 | sami.ahmedzia@gmail.com Objective · To succeed in an environment of growth and excellence and earn a job which provides me job Satisfaction and self-development and help me achieve personal as well as organization goals. Education BS | MARCH 24, 2007 | SIR SYED UNIVERSITY OF ENGINEERING AND TECHNOLOGY · Major: Electronics with Industrial Automation · Minor: Communication and Data Networking MBA | IN PROGRESS | IQRA UNIVERSITY · Major: International Business and Marketing Management · Minor: Channel Management Skills & Abilities MANAGEMENT · Lead engineers in performing special high level assignments requiring extensive demonstrated technical knowledge ANALYTICAL · Develop control methods, procedure and programs to eliminate causative factors associated with specific problems COMMUNICATION · Excellent English Communication and Report Writing RESULT ORIENTATION, CONCEPTULIZATION, COMPUTER AND LEADERSHIP · Provide engineering service to identify and appraise solutions for the assigned function · Thorough knowledge of engineering practices, calculation methods, and design details related to field instrument. · Working knowledge of economic principles, engineering codes, standards and specifications Experience ASSISTANT MANAGER | NOVATEX LTD | SEPTEMBER 21, 2007 · Extensive experience in Maintenance, Troubleshooting, Installation, Calibration of Process Instrumentation. Also skilful in Designing, Engineering, Erection, Commissioning and Process Plant Automation through DCS & PLC. · Analyze engineering problems, with respect to scope, economic value, long range planning and, budgetary considerations in order to support the development and formulate the basis for engineering studies in any of several basic or special engineering fields. Execute studies and analysis as need base or as instructed by Department Management. · Support for engineering projects, including scope definition, interrelationship, physical solution definition, and cost estimation, and supervise project execution.
- 2. Page 2 · Recommend modifications in order to improve existing facilities and standardization, enhance safety and operability’s, etc. · As assigned, prepare, review or consolidate root cause analysis or investigation reports or engineering studies in order to support Management decision-making and plant trouble shootings. · Provide coaching to lower levels engineers and supervise their work to ensure proper transfer of skills and work performance as per standards · Generate a preventive maintenance activities list in instrumentation areas and work out with PM/QC group to optimize/reinforce PM activities and frequency based on received feedback from maintenance department and to track PM effectiveness · Execution experience with major DCS System (DeltaV of Emerson Process Management, ECS700 of Supcon), PLCs (Siemens, Fatek, Allen Bradely, Fuji and Omron) and HMI Designing (Winccflexible, Factory Talk View, Easy-builder etc) and also performed modification on SCADA applications like Wincc. · Successfully develop the third party communication with DCS like Modbus, Profibus etc. · Involve in designing and engineering of Automation Projects and Control System Revamping. · Responsible for planning, scheduling and execution of all jobs related to Instrumentation and Control System Automation. · Promptly record and report all calibration activities will full details of work carried out including parts. Also update calibration plans as per ISO requirement. · Responsible for liaising with other departments, co-ordinate maintenance program, Implement Company’s maintenance schedule on company’s computerized maintenance management system (CMMS) (MAXIMO). PROJECT | NOVATEX LTD | ACCOMPLISHMENTS 1. REVAMPING OF POLY PLANT DCS 2. WASTE HEAT RECOVERY SYSTEM 3. UTILITY DATA LOGGER SYSTEM 4. REVAMPING OF DEMIN PLANT PLC 5. ENERGY CONSUMPTION RECORDING SYSTEM FOR MOLDING MACHINES 6. ERECTION AND COMMISIONING OF 600 T/D SOLID STATE POLYMER PLANT (BUHLER) OTHER DETAILS Nationality: Pakistan National CNIC NO: 42201-0165443-9 Date of Birth: 31st OCTOBER, 1983 PASSPORT NO: BH5994431 Marital Status: Married Current Address: House No. 46-N BLOCK 2 PECHS, Karachi-75400. Permanent Address: House No. 46-N BLOCK 2 PECHS, Karachi-75400.