This document discusses different types of maintenance procedures for computers. It defines maintenance and identifies two main types: preventive and corrective maintenance. Preventive maintenance aims to maintain equipment in working order and extend its life, and has two sub-types - planned maintenance, which involves scheduled tasks, and condition-based maintenance, which is based on equipment condition. Corrective maintenance rectifies faults. The document provides examples of learning tasks to differentiate the maintenance types and assess understanding.

1. Procedures in
Planning and Conducting
Maintenance

2. At the end of the discussion, you must be
able to:
• Identify the different maintenance procedures in taking
care of computers;
• Differentiate preventive maintenance and corrective
maintenance;
• Differentiate ideal computer laboratory atmosphere

3. Maintenance
• The act or activity of keeping something in an
existing and usually satisfactory condition

4. Two Types of Maintenance
• Preventive Maintenance
• Corrective Maintenance

5. Two Types of Maintenance
• Preventive Maintenance
- is given for maintaining equipment and facilities
in satisfactory operating condition to extend the life
of the component.
- Two types of Preventive Maintenance
1. Planned Maintenance
2. Conditioned-Based Maintenance

6. Two Types of Maintenance
• Preventive Maintenance
- is given for maintaining equipment and facilities
in satisfactory operating condition to extend the life
of the component.
- Two types of Preventive Maintenance
1. Planned Maintenance
2. Condition Based Maintenance

7. Two Types of
Preventive Maintenance
• Planned Maintenance (PM)
- is any variety of scheduled maintenance
to an object or an item of equipment.
• Condition Based Maintenance (CBM)
- is maintenance strategy that uses the
actual condition of the asset to decide what
maintenance needs to be done.

8. Two Types of Maintenance
• Corrective Maintenance
- is task performed to identify, isolate, and rectify a
fault so that the failed equipment or system can be
restored to an operational conditions within the
tolerances or limits.

9. Learning Task – Analysis
Picture 1 Picture 2

10. Learning Task – Analysis
Picture 1 Picture 2

11. Learning Task – Analysis
Picture 1 Picture 2

12. Learning Task - Application
• Group yourselves into 3 groups.
• Then make 5 sentences, what are the
most important things to consider to have
an ideal computer laboratory?

13. Assessment - Identify the following sentences.
Write your answers in a ¼ sheet of paper.
_______ 1. Maintenance of systems BEFORE fault occurs.
_______ 2. It is the act or activity of keeping something in
an existing and usually satisfactory condition.
_______ 3. It is a task performed to identify, isolate and
rectify a fault.

14. Assessment - Identify the following sentences.
Write your answers in a ¼ sheet of paper.
_______ 4. It is to ensure that an item of equipment is
operating correctly to avoid any unscheduled breakdown
and downtime of an equipment.
_______ 5. It dictates that maintenance should only be
performed when certain indicators show decreasing
performance.

15. Answers key:
1. Preventive Maintenance
2. Maintenance
3. Corrective Maintenance
4. Planned Maintenance
5. Condition-Based Maintenance

16. Assignment
Write a reaction paper regarding the video
presentation shown earlier.