Occupational Health and Safety (OHS) Standards.pptx
•Download as PPTX, PDF•
0 likes•211 views
The document outlines Occupational Health and Safety (OHS) standards for working with computers in CSS. It was formulated in 1978 in compliance with the Philippine constitution to protect worker safety and health. The 12 standards listed include working with others in case of emergencies, powering off computers before working on them, avoiding liquids near work areas, wearing protective equipment, and having contingency measures for accidents. Following OHS standards helps ensure the safety of students working with computers in CSS.
Report
Share
Report
Share
Recommended
Lesson 7_Practice Occupational Health and Safety Procedures (LO1)
The document discusses occupational health and safety (OHS) procedures. It defines OHS and explains that it aims to improve workplace health, safety, and welfare for workers and others. It also identifies common workplace hazards like physical, chemical, ergonomic, biological, and psychosocial hazards. The document outlines strategies for identifying hazards and risks, such as observation, records review, and interviews. It provides examples of contingency plans and safety signs and symbols used in workplaces.
Computer hardware servicing practice occupational health and safety procedure
Computer hardware servicing practice occupational health and safety procedure *don't forget to leave any comments
Occupational Health & Safety Procedure.pptx
This document outlines occupational health and safety procedures for information and communications technology. It discusses identifying hazards, assessing risks, and implementing risk controls. Specific hazards covered include physical hazards, mechanical hazards, electric shock hazards, and ergonomic hazards. The document provides 15 safety precautions for working on computers, such as grounding oneself before touching parts, powering off and unplugging computers, using proper tools, and wearing protective equipment.
ESD TOOLS.pptx
Electro-Static Discharge (ESD) tools are used to safely discharge static electricity and protect electronic components from electrostatic discharge events. Common ESD tools include grounding cords, antistatic tools, antistatic gloves, ESD rubber matting, and antistatic clothing. These tools work to dissipate static electricity and prevent its buildup by providing conductive paths to ground potential. Proper use of ESD tools like connecting antistatic mats and wrist straps to grounding points helps protect sensitive electronic equipment from damage due to static electricity.
TLE-IA Consumer Electronics Servicing Curriculum Guide
This document outlines a curriculum for an exploratory and introductory course in consumer electronics servicing for grades 7 and 8 students, and a specialization course for grade 9 students. The courses cover key competencies including using tools, performing calculations, interpreting technical drawings, observing safety procedures, and more. The grade 9 course focuses on assembling and disassembling consumer electronics and maintaining appliances. Both courses aim to provide an understanding of concepts, skills, and career opportunities in the field of consumer electronics servicing.
Handtools
This document provides an overview of the proper use of hand tools for computer hardware servicing. It defines various tools and groups them into four categories: electro-static discharge tools to prevent static damage, hand tools that can be manually or electrically operated, cleaning tools to maintain components, and diagnostic tools to test circuits and functionality. The document stresses safely selecting the right tool for each task and taking precautions such as using anti-static wrist straps, mats, and properly maintaining tools.
Introduction to Electrical Installation and Maintenance
This document provides an introduction to an exploratory course on electrical installation and maintenance. It discusses key terms, the four major areas of Technology and Livelihood Education, and competencies students should possess including preparing electrical supplies and tools, performing calculations, interpreting technical drawings, maintaining tools and safety. Career opportunities for those achieving certification include building wiring electrician, residential/commercial wiring electrician, and maintenance electrician. The document outlines topics to be covered like wiring, circuits, measurement conversion, and safety signs. Students are given assignments to set goals, take a quiz, and study safety practices in using electrical tools and equipment.
OHS and the Types of Hazards
Occupational safety and health involves recognizing workplace hazards to prevent illness and injury. A hazard is any situation that could harm health or safety. To manage risks, employers should identify hazards, assess risks, and make changes to control risks. Common computer technician hazards include physical, mechanical, chemical, and electric shock hazards. Physical hazards are conditions that can cause harm. Mechanical hazards involve machines. Chemical hazards exist as gases, liquids, and dusts that can be inhaled or absorbed. Electric shock hazards occur upon contact with a current source.
Recommended
Lesson 7_Practice Occupational Health and Safety Procedures (LO1)
The document discusses occupational health and safety (OHS) procedures. It defines OHS and explains that it aims to improve workplace health, safety, and welfare for workers and others. It also identifies common workplace hazards like physical, chemical, ergonomic, biological, and psychosocial hazards. The document outlines strategies for identifying hazards and risks, such as observation, records review, and interviews. It provides examples of contingency plans and safety signs and symbols used in workplaces.
Computer hardware servicing practice occupational health and safety procedure
Computer hardware servicing practice occupational health and safety procedure *don't forget to leave any comments
Occupational Health & Safety Procedure.pptx
This document outlines occupational health and safety procedures for information and communications technology. It discusses identifying hazards, assessing risks, and implementing risk controls. Specific hazards covered include physical hazards, mechanical hazards, electric shock hazards, and ergonomic hazards. The document provides 15 safety precautions for working on computers, such as grounding oneself before touching parts, powering off and unplugging computers, using proper tools, and wearing protective equipment.
ESD TOOLS.pptx
Electro-Static Discharge (ESD) tools are used to safely discharge static electricity and protect electronic components from electrostatic discharge events. Common ESD tools include grounding cords, antistatic tools, antistatic gloves, ESD rubber matting, and antistatic clothing. These tools work to dissipate static electricity and prevent its buildup by providing conductive paths to ground potential. Proper use of ESD tools like connecting antistatic mats and wrist straps to grounding points helps protect sensitive electronic equipment from damage due to static electricity.
TLE-IA Consumer Electronics Servicing Curriculum Guide
This document outlines a curriculum for an exploratory and introductory course in consumer electronics servicing for grades 7 and 8 students, and a specialization course for grade 9 students. The courses cover key competencies including using tools, performing calculations, interpreting technical drawings, observing safety procedures, and more. The grade 9 course focuses on assembling and disassembling consumer electronics and maintaining appliances. Both courses aim to provide an understanding of concepts, skills, and career opportunities in the field of consumer electronics servicing.
Handtools
This document provides an overview of the proper use of hand tools for computer hardware servicing. It defines various tools and groups them into four categories: electro-static discharge tools to prevent static damage, hand tools that can be manually or electrically operated, cleaning tools to maintain components, and diagnostic tools to test circuits and functionality. The document stresses safely selecting the right tool for each task and taking precautions such as using anti-static wrist straps, mats, and properly maintaining tools.
Introduction to Electrical Installation and Maintenance
This document provides an introduction to an exploratory course on electrical installation and maintenance. It discusses key terms, the four major areas of Technology and Livelihood Education, and competencies students should possess including preparing electrical supplies and tools, performing calculations, interpreting technical drawings, maintaining tools and safety. Career opportunities for those achieving certification include building wiring electrician, residential/commercial wiring electrician, and maintenance electrician. The document outlines topics to be covered like wiring, circuits, measurement conversion, and safety signs. Students are given assignments to set goals, take a quiz, and study safety practices in using electrical tools and equipment.
OHS and the Types of Hazards
Occupational safety and health involves recognizing workplace hazards to prevent illness and injury. A hazard is any situation that could harm health or safety. To manage risks, employers should identify hazards, assess risks, and make changes to control risks. Common computer technician hazards include physical, mechanical, chemical, and electric shock hazards. Physical hazards are conditions that can cause harm. Mechanical hazards involve machines. Chemical hazards exist as gases, liquids, and dusts that can be inhaled or absorbed. Electric shock hazards occur upon contact with a current source.
Tools and equipment in computer hardware servicing
All tools should be kept in good condition through regular maintenance. The proper tool should be used for each job. Tools should be examined before use and any damaged or defective tools should not be used. Tools should be operated according to manufacturer's instructions and the proper protective equipment should be worn for both the tool and activity.
PHILIPPINE OCCUPATIONAL HEALTH AND SAFETY STANDARDS.pptx
The document outlines the occupational health and safety standards in the Philippines. It establishes that the Occupational Safety and Health Center was created by Executive Order No. 307 to prevent work-related injuries and illnesses, implement occupational health and safety programs, and maintain an expert center for industrial diseases and safety. The Center serves as the authority on occupational safety and health through research, training, and disseminating information and technical services.
Occupational health and safety procedures
This document outlines occupational health and safety procedures for recognizing and preventing workplace hazards. It defines a hazard as anything that could cause harm and explains how to assess the likelihood and severity of injury from hazards. Examples of physical hazards mentioned include trip hazards, electrical hazards, and fire hazards. The document stresses the importance of following warnings, keeping workspaces clean and organized, and knowing emergency procedures to protect both people and equipment.
DLL-CAREGIVING-BALIBAGO-BIGA NHS.pdf
This daily lesson log outlines a lesson plan for a 7th grade Caregiving class. The objectives are for students to understand and independently use caregiving tools, equipment, and paraphernalia. The content covers proper usage and procedures for using common equipment in cleaning, laundry, and ironing. Learning activities include group discussions on washing and ironing procedures, demonstrations of using irons, and evaluating students' understanding of sorting clothes before washing. The goal is for students to learn how to properly use common caregiving tools and equipment.
Identify hazards and risks
The document discusses identifying hazards and risks in the workplace. It provides requirements for surveying the workplace to identify hazards in writing and determine if personal protective equipment is needed. Hazards should be reassessed whenever new equipment is installed. The document defines hazards, risks, and exposure and provides examples of different types of hazards like physical, mechanical, chemical, and biological hazards. It lists some working conditions that can produce hazards like falling objects, sharp objects, toxic chemicals, heat, and radiation. The last sections provide guidance on maintaining tools, hand tools, power tools, and other equipment.
Pc hardware servicing learning module (1)
The document is a learning module on computer hardware servicing for grades 7 and 8 in the Philippines. It contains 4 lessons that cover key competencies: 1) using hand tools, 2) performing calculations and measurements, 3) preparing and interpreting technical drawings, and 4) practicing occupational health and safety. The first lesson focuses on selecting, using, and maintaining appropriate hand tools for computer repair tasks. It provides definitions of common tools and groups them into categories for electrostatic discharge protection, hand tools, cleaning tools, and diagnostic tools. The lesson emphasizes safe tool use, maintenance, and selecting the right tool for each job.
OHS in CSS Grade 10
This document provides safety guidelines for computer technicians. It outlines the importance of following proper safety procedures to prevent accidents, injuries, fines and legal consequences. Specific safety tips are provided, such as turning off and unplugging equipment before working on it, wearing appropriate protective gear, keeping workspaces clean and organized, properly disposing of hazardous materials, and having a fire escape plan and using a fire extinguisher appropriately in case of a fire.
Grade8_Q1-4_W1_HandTools.pdf
This document provides information about a module on using and maintaining hand tools for computer hardware servicing. It includes the development team who created the module, as well as copyright information. The module is divided into three topics: preparing hand tools, using appropriate hand tools and test equipment, and maintaining hand tools. It discusses the importance of selecting the proper tools for jobs and using tools safely.
LESSON-3-SAFETY-IN-THE-WORK-PLACE.pptx
This document discusses safety in the workplace. It emphasizes that ensuring safety is a shared responsibility of both employers and employees. Employers must provide a hazard-free work environment, safety training, and protective equipment. Employees must follow safety procedures, report any hazards, and use protective equipment properly. Examples of workplace hazards include physical, biological, ergonomic and psychological risks. If a potential hazard is discovered, employees should notify their supervisor and ensure all workers are aware of the issue. The Department of Labor and Employment is responsible for protecting workers' safety and health.
K to 12 Electronics Learning Module
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
K to-12-nail-care-learning-module
This document provides a learning module on nail care (nail care) services for grades 7 and 8 students. It covers 4 lessons: 1) use of nail care tools and equipment, 2) maintaining tools and equipment, 3) occupational health and safety procedures, and 4) basic nail designs. Each lesson is directed at achieving specific learning outcomes and covers topics like identifying necessary tools, using and storing equipment, hazard identification, and creating basic nail designs. The module aims to teach essential competencies for a career in nail care and introduces concepts needed for the National Certificate Level II qualification in Beauty Care.
Proper tools selection
The document discusses proper tool selection and safe use for working on computers and electronics. It emphasizes the importance of understanding the task, selecting the appropriate tool for each job, and using tools only as intended by the manufacturer. A variety of common computer maintenance and repair tools are described, including electrostatic discharge tools to prevent static damage, hand tools like screwdrivers and pliers, cleaning tools like compressed air and swabs, and diagnostic tools like multimeters and loopback adapters. Proper tool selection and use is crucial for safety and completing tasks efficiently.
Hardware tools chs 8
This document lists various hardware tools needed for repair and maintenance of electronic devices. It includes electro-static discharge tools like anti-static wrist straps and mats to prevent static damage. A variety of hand tools are listed such as screwdrivers, pliers and tweezers for assembly and disassembly. Cleaning tools like lint-free cloths and compressed air are included for cleaning internal components. Diagnostic tools such as multimeters and loopback adapters are also listed to test electronic devices.
What is electrical installation and maintenance
The document summarizes the Electrical Installation and Maintenance NC II course in the Philippines. The 402-hour course trains students to install and maintain electrical wiring, lighting, and related equipment in residential buildings under 600 volts. Students learn skills like interpreting drawings, installing wiring devices, and setting up electrical protection systems. Upon completing competency assessment, graduates receive a National Certificate II, qualifying them for jobs as building wiring electricians, residential/commercial wiring electricians, or maintenance electricians.
TLE - COMPUTER SYSTEMS SERVICING - HAND TOOLS
The document discusses hand tools used for computer system servicing. It identifies the most essential learning competency as identifying and selecting appropriate hand tools according to task requirements. It groups hardware tools into four categories: electro-static discharge tools to protect from static electricity; hand tools used manually or electrically; cleaning tools; and diagnostic tools. Examples of specific hand tools are given for each category, including anti-static wrist straps, screwdrivers, pliers, wire strippers, tweezers, and diagnostic tools.
Use of tools in pc hardware servicing
As an aspiring technician, it is very important to know the different components of a computer system.
Grade 7 Detailed Lesson Plan 2
The document provides a detailed lesson plan on proper tool use for computer hardware servicing. It includes 7 objectives, 4 procedures, and assessment activities. The key points covered are:
1. Identifying appropriate tools for equalizing electrical charge, tightening screws, and tightening hex bolts.
2. Explaining proper use of antistatic wrist straps, antistatic mats, screwdrivers, and hex drivers.
3. Detailing cleaning procedures for computer cases, screens, components, keyboards, and mice using compressed air and cleaning solutions.
1st quarter css week 1
The document is a learning activity sheet that provides instructions and exercises for students to assess personal entrepreneurial competencies (PECs) needed for computer systems servicing. It includes activities for students to identify their own PECs, compare them to those of successful entrepreneurs, and create an action plan to develop their PECs. The goal is for students to understand the important PECs of entrepreneurs and align their own skills to be successful in the field.
Proper tool selection
This document discusses proper tool selection for repairing hardware. It states that the first steps are to understand the tasks needed and plan the sequence. The best tool for each task requires training and following manufacturer instructions. All necessary tools and parts should be obtained. Tools should only be used as intended and instructions followed for safety. The document then describes categories of hardware tools including electro-static discharge tools, hand tools, cleaning tools, and diagnostic tools. Examples are provided for common tools in each category.
1st electricity
The document provides a project plan for making an extension cord. It includes objectives to demonstrate how to make an extension cord safely. Materials, tools, steps and criteria for assessment are listed. The total cost of materials is estimated at 94 pesos plus estimated labor costs of 28 pesos, for a total selling cost of 122 pesos. Pictures are provided of sample materials. Performance will be assessed on accuracy, workmanship, proper tool handling and speed.
CSS OHSP.pdf
Occupational health and safety aims to protect worker health and safety through legislation, policies and procedures. It involves promoting worker well-being, preventing health issues from working conditions, and protecting workers from employment risks. The document then lists 12 procedures for computer system servicing technicians, such as powering off computers before working on them, wearing protective equipment, and having contingency measures for emergencies.
MODULE 3 AND 4. PERFORMING COMPUTER OPERATIONS
This is all about the different performing computer operations that helps the students to gain more knowledge
More Related Content
What's hot
Tools and equipment in computer hardware servicing
All tools should be kept in good condition through regular maintenance. The proper tool should be used for each job. Tools should be examined before use and any damaged or defective tools should not be used. Tools should be operated according to manufacturer's instructions and the proper protective equipment should be worn for both the tool and activity.
PHILIPPINE OCCUPATIONAL HEALTH AND SAFETY STANDARDS.pptx
The document outlines the occupational health and safety standards in the Philippines. It establishes that the Occupational Safety and Health Center was created by Executive Order No. 307 to prevent work-related injuries and illnesses, implement occupational health and safety programs, and maintain an expert center for industrial diseases and safety. The Center serves as the authority on occupational safety and health through research, training, and disseminating information and technical services.
Occupational health and safety procedures
This document outlines occupational health and safety procedures for recognizing and preventing workplace hazards. It defines a hazard as anything that could cause harm and explains how to assess the likelihood and severity of injury from hazards. Examples of physical hazards mentioned include trip hazards, electrical hazards, and fire hazards. The document stresses the importance of following warnings, keeping workspaces clean and organized, and knowing emergency procedures to protect both people and equipment.
DLL-CAREGIVING-BALIBAGO-BIGA NHS.pdf
This daily lesson log outlines a lesson plan for a 7th grade Caregiving class. The objectives are for students to understand and independently use caregiving tools, equipment, and paraphernalia. The content covers proper usage and procedures for using common equipment in cleaning, laundry, and ironing. Learning activities include group discussions on washing and ironing procedures, demonstrations of using irons, and evaluating students' understanding of sorting clothes before washing. The goal is for students to learn how to properly use common caregiving tools and equipment.
Identify hazards and risks
The document discusses identifying hazards and risks in the workplace. It provides requirements for surveying the workplace to identify hazards in writing and determine if personal protective equipment is needed. Hazards should be reassessed whenever new equipment is installed. The document defines hazards, risks, and exposure and provides examples of different types of hazards like physical, mechanical, chemical, and biological hazards. It lists some working conditions that can produce hazards like falling objects, sharp objects, toxic chemicals, heat, and radiation. The last sections provide guidance on maintaining tools, hand tools, power tools, and other equipment.
Pc hardware servicing learning module (1)
The document is a learning module on computer hardware servicing for grades 7 and 8 in the Philippines. It contains 4 lessons that cover key competencies: 1) using hand tools, 2) performing calculations and measurements, 3) preparing and interpreting technical drawings, and 4) practicing occupational health and safety. The first lesson focuses on selecting, using, and maintaining appropriate hand tools for computer repair tasks. It provides definitions of common tools and groups them into categories for electrostatic discharge protection, hand tools, cleaning tools, and diagnostic tools. The lesson emphasizes safe tool use, maintenance, and selecting the right tool for each job.
OHS in CSS Grade 10
This document provides safety guidelines for computer technicians. It outlines the importance of following proper safety procedures to prevent accidents, injuries, fines and legal consequences. Specific safety tips are provided, such as turning off and unplugging equipment before working on it, wearing appropriate protective gear, keeping workspaces clean and organized, properly disposing of hazardous materials, and having a fire escape plan and using a fire extinguisher appropriately in case of a fire.
Grade8_Q1-4_W1_HandTools.pdf
This document provides information about a module on using and maintaining hand tools for computer hardware servicing. It includes the development team who created the module, as well as copyright information. The module is divided into three topics: preparing hand tools, using appropriate hand tools and test equipment, and maintaining hand tools. It discusses the importance of selecting the proper tools for jobs and using tools safely.
LESSON-3-SAFETY-IN-THE-WORK-PLACE.pptx
This document discusses safety in the workplace. It emphasizes that ensuring safety is a shared responsibility of both employers and employees. Employers must provide a hazard-free work environment, safety training, and protective equipment. Employees must follow safety procedures, report any hazards, and use protective equipment properly. Examples of workplace hazards include physical, biological, ergonomic and psychological risks. If a potential hazard is discovered, employees should notify their supervisor and ensure all workers are aware of the issue. The Department of Labor and Employment is responsible for protecting workers' safety and health.
K to 12 Electronics Learning Module
The document provides guidance on using various hand tools for consumer electronics servicing, including screwdrivers, soldering tools, splicing tools, drilling tools, cutting tools, and auxiliary tools. It also covers safety precautions and common faults to avoid when using hand tools. The document is meant to teach students in grades 7 and 8 the basic skills needed for consumer electronics servicing.
K to-12-nail-care-learning-module
This document provides a learning module on nail care (nail care) services for grades 7 and 8 students. It covers 4 lessons: 1) use of nail care tools and equipment, 2) maintaining tools and equipment, 3) occupational health and safety procedures, and 4) basic nail designs. Each lesson is directed at achieving specific learning outcomes and covers topics like identifying necessary tools, using and storing equipment, hazard identification, and creating basic nail designs. The module aims to teach essential competencies for a career in nail care and introduces concepts needed for the National Certificate Level II qualification in Beauty Care.
Proper tools selection
The document discusses proper tool selection and safe use for working on computers and electronics. It emphasizes the importance of understanding the task, selecting the appropriate tool for each job, and using tools only as intended by the manufacturer. A variety of common computer maintenance and repair tools are described, including electrostatic discharge tools to prevent static damage, hand tools like screwdrivers and pliers, cleaning tools like compressed air and swabs, and diagnostic tools like multimeters and loopback adapters. Proper tool selection and use is crucial for safety and completing tasks efficiently.
Hardware tools chs 8
This document lists various hardware tools needed for repair and maintenance of electronic devices. It includes electro-static discharge tools like anti-static wrist straps and mats to prevent static damage. A variety of hand tools are listed such as screwdrivers, pliers and tweezers for assembly and disassembly. Cleaning tools like lint-free cloths and compressed air are included for cleaning internal components. Diagnostic tools such as multimeters and loopback adapters are also listed to test electronic devices.
What is electrical installation and maintenance
The document summarizes the Electrical Installation and Maintenance NC II course in the Philippines. The 402-hour course trains students to install and maintain electrical wiring, lighting, and related equipment in residential buildings under 600 volts. Students learn skills like interpreting drawings, installing wiring devices, and setting up electrical protection systems. Upon completing competency assessment, graduates receive a National Certificate II, qualifying them for jobs as building wiring electricians, residential/commercial wiring electricians, or maintenance electricians.
TLE - COMPUTER SYSTEMS SERVICING - HAND TOOLS
The document discusses hand tools used for computer system servicing. It identifies the most essential learning competency as identifying and selecting appropriate hand tools according to task requirements. It groups hardware tools into four categories: electro-static discharge tools to protect from static electricity; hand tools used manually or electrically; cleaning tools; and diagnostic tools. Examples of specific hand tools are given for each category, including anti-static wrist straps, screwdrivers, pliers, wire strippers, tweezers, and diagnostic tools.
Use of tools in pc hardware servicing
As an aspiring technician, it is very important to know the different components of a computer system.
Grade 7 Detailed Lesson Plan 2
The document provides a detailed lesson plan on proper tool use for computer hardware servicing. It includes 7 objectives, 4 procedures, and assessment activities. The key points covered are:
1. Identifying appropriate tools for equalizing electrical charge, tightening screws, and tightening hex bolts.
2. Explaining proper use of antistatic wrist straps, antistatic mats, screwdrivers, and hex drivers.
3. Detailing cleaning procedures for computer cases, screens, components, keyboards, and mice using compressed air and cleaning solutions.
1st quarter css week 1
The document is a learning activity sheet that provides instructions and exercises for students to assess personal entrepreneurial competencies (PECs) needed for computer systems servicing. It includes activities for students to identify their own PECs, compare them to those of successful entrepreneurs, and create an action plan to develop their PECs. The goal is for students to understand the important PECs of entrepreneurs and align their own skills to be successful in the field.
Proper tool selection
This document discusses proper tool selection for repairing hardware. It states that the first steps are to understand the tasks needed and plan the sequence. The best tool for each task requires training and following manufacturer instructions. All necessary tools and parts should be obtained. Tools should only be used as intended and instructions followed for safety. The document then describes categories of hardware tools including electro-static discharge tools, hand tools, cleaning tools, and diagnostic tools. Examples are provided for common tools in each category.
1st electricity
The document provides a project plan for making an extension cord. It includes objectives to demonstrate how to make an extension cord safely. Materials, tools, steps and criteria for assessment are listed. The total cost of materials is estimated at 94 pesos plus estimated labor costs of 28 pesos, for a total selling cost of 122 pesos. Pictures are provided of sample materials. Performance will be assessed on accuracy, workmanship, proper tool handling and speed.
What's hot (20)
Tools and equipment in computer hardware servicing
Tools and equipment in computer hardware servicing
PHILIPPINE OCCUPATIONAL HEALTH AND SAFETY STANDARDS.pptx
PHILIPPINE OCCUPATIONAL HEALTH AND SAFETY STANDARDS.pptx
Similar to Occupational Health and Safety (OHS) Standards.pptx
CSS OHSP.pdf
Occupational health and safety aims to protect worker health and safety through legislation, policies and procedures. It involves promoting worker well-being, preventing health issues from working conditions, and protecting workers from employment risks. The document then lists 12 procedures for computer system servicing technicians, such as powering off computers before working on them, wearing protective equipment, and having contingency measures for emergencies.
MODULE 3 AND 4. PERFORMING COMPUTER OPERATIONS
This is all about the different performing computer operations that helps the students to gain more knowledge
Quarter 1 module
Here are the answers:
1. Tablet computers
2. Servers
3. Minicomputers
4. Microcomputers
CSS 10 WEEK 1.pptx
The document discusses occupational health and safety procedures when working in a computer laboratory. It identifies potential hazards like electric shock, chemicals, slips and trips. It provides safety precautions like wearing protective equipment, disconnecting power before working, and holding components by the edges. The 5S methodology for organization and standardization is also explained. A quiz assesses understanding of proper safety protocols for working on computers and identifying hazards.
Denm 334 osha legal management
The document discusses Republic Act No. 11058, which strengthens compliance with occupational safety and health standards in the Philippines and provides penalties for violations. It overviews key statistics on work-related accidents and injuries both globally and within the Philippines. It then outlines the various chapters and sections of the Act, which establish duties and rights of employers and workers regarding safety protections, training, reporting, and enforcement. Employers are liable to provide protective equipment, facilities, programs and training to ensure a safe workplace.
CSS 1 WEEK 02 2021-2022.pptx
This document discusses occupational health and safety (OHS) procedures for computer system servicing. It outlines four objectives for understanding and applying OHS policies when assembling computers. These include understanding what OHS procedures are, applying OHS in assembly, identifying tools for assembly/disassembly, and understanding tools, materials and equipment. The document provides examples of 12 OHS procedures to follow in a computer laboratory, such as powering off computers before working, wearing protective equipment, and recognizing emergency procedures. It also outlines four main types of workplace hazards: physical, ergonomic, chemical and biological hazards.
computer css nc2 slides.pptx
This document outlines the competencies for installing and configuring computer systems. It includes 5 competencies: 1) assemble computer hardware, 2) prepare installer, 3) install operating system and device drivers, 4) install application software, and 5) conduct testing and documentation. The first competency involves assembling computer hardware safely by following procedures like disconnecting power and using anti-static wrist straps. Safety is emphasized as computer equipment can injure or kill if not handled properly. Basic computer hardware components are also defined. The goal is to foster a safe work environment when installing and configuring computer systems.
ITE v5.0 - Chapter 2
This document discusses safe lab procedures and tool use for working on personal computers. It emphasizes establishing a clean, organized workspace with safety guidelines to protect people from injury, equipment from damage, and the environment from contamination. Specific hazards discussed include electrostatic discharge, electromagnetic interference, power fluctuations, and improper disposal of hazardous materials. The document also outlines proper use of hardware tools, software tools, and cleaning materials to safely perform computer repairs and maintenance.
2 Occupational and Health Safety and PPE powerpoint .pptx
The document provides guidelines and procedures for maintaining computer systems and networks safely and effectively. It emphasizes using proper protective equipment like anti-static wrist straps and bags, as well as following organizational health and safety procedures. Technicians should take precautions such as powering off computers before working, avoiding food/drinks, using the right tools for jobs, and keeping work areas clean and organized. The 5S methodology is also referenced for maintaining an orderly and efficient work environment.
Mod4 l2.1
The document provides guidelines for personal safety when working with computers. It advises listening to teacher instructions to prevent accidents, not working on computers when wet to avoid electrocution, and not removing internal devices when the computer is turned on. It also recommends avoiding playing or running in the room, wearing protective equipment like coveralls and anti-static wrist straps, asking teachers for assistance when dealing with computer devices, and applying safety measures when handling tools to prevent damages.
Ite v5.0 chapter2
This document discusses safe lab procedures and tool use when working with computer components. It emphasizes the importance of a safe, organized workspace and following proper safety guidelines to protect both users and equipment from injury, damage, and environmental contamination. Specific guidelines are provided for preventing electrostatic discharge, electromagnetic interference, power fluctuations, and properly disposing of hazardous materials. A variety of hardware tools, software tools, and best practices for their proper use are also outlined.
RA-11058.pdf
The document discusses the duties of employers and workers regarding occupational safety and health standards. It covers requirements for providing protective equipment, training workers on hazards, allowing worker participation in safety programs, and workers' rights to report unsafe conditions and refuse dangerous work. The proposed Implementing Rules and Regulations (IRR) expand on these requirements, such as specifying that training must be in a language workers understand, protective equipment must be appropriate for each worker, and employers must evaluate hazards and safety measures.
Management ppt chapter 4 it's not important
The document discusses safety management and general safety norms. It begins by defining safety and industrial safety. It emphasizes the importance of safety in reducing accidents and injuries. It outlines the need for a safety management system to identify and manage risks through policies, responsibilities, and continuous improvement. The document then lists general safety norms regarding personal protective equipment, safe work practices, hazard identification and emergency preparedness. It provides examples of safety norms for woodworking machines. Overall, the document stresses the importance of safety precautions and management systems in creating accident-free work environments.
Occupational Health and Safety.pptx
Occupational health and safety (OHS) deals with protecting workers' health and safety in the workplace. The document discusses that OHS aims to safeguard workers' well-being and ensure they can return home unharmed each day. It also outlines 12 personal safety precautions people should take when working with computers, such as powering off and unplugging computers before working on them, avoiding liquids, wearing protective equipment, and ensuring proper cleaning and emergency measures are in place. The overall message is that OHS is important for creating safe work environments and protecting all workers.
Installing hardware components
The document discusses installing various hardware components into a computer and the safety precautions that should be taken when doing so. It describes installing a graphics card to improve graphics capabilities for gaming, a USB 3.0 PCIe card to enable faster data transfer speeds, and a WIFI PCI card to set up a wireless network. The document outlines potential dangers like back injuries from lifting heavy components and electrostatic discharge damage. It emphasizes using proper lifting techniques, grounding oneself on anti-static mats, and avoiding jewelry to reduce risks while working.
OCCUPATIONAL HEALTH AND SAFETY.ppt
Occupational health and safety aims to protect workers' safety, health, and welfare. It involves preventing work-related injury or disease. Effective troubleshooting requires ensuring safety to avoid failures from injuries, equipment issues, or misdiagnoses. To troubleshoot computers safely, one should wear appropriate, loose clothing; use an anti-static wrist strap or mat to discharge static electricity; and always unplug computers and avoid capacitors when working inside.
Orientation SAFETY IN THE WORKPLACE.pptx
1. The employer must ensure a safe work environment by properly ventilating and disinfecting workspaces, and providing safety reminders.
2. Hazards in the workplace can be physical, biological, ergonomic, or psychological in nature and proper precautions should be taken like isolating infected individuals and enforcing infection control measures.
3. If a hazard is discovered, it should be reported to a supervisor, followed up on, and documented to ensure the issue is properly addressed.
Health and safety unit 13
This document provides information on various health and safety topics relevant to social care work, including legislation, risk assessment, manual handling, hazardous substances, electricity, and infection control. It discusses the Health and Safety at Work Act 1974 and the duties it places on employers to protect employees. Accident reporting regulations and safe use of work equipment are also summarized. Slips, trips and falls are identified as common hazards, with steps outlined to prevent them such as cleaning up spills and ensuring good lighting. Hand washing is emphasized as important for infection control. Food safety basics around preventing bacterial growth are briefly covered as well.
CREATIVE TECHNOLOGY 7 QI-L4
LO 1.1 discusses unlocking occupational health and safety procedures using computer applications for awareness. LO 1.2 lists enumerating hazards and risks that may occur in workstations through skits. LO 1.3 decodes the meanings of hazard and risk warning symbols and the importance of personal protective equipment. The document provides definitions for occupational health and safety, computer security, cybersecurity, data encryption, and other terms. It also lists general safety guidelines for working with computers.
Vijeo citect quick start tutorial - part 1 ver d
This tutorial provides an introduction to building and running a project in Vijeo Citect V7.40. It discusses important safety information, notices, warnings, and cautions for working with Vijeo Citect software and ensuring proper design, testing, and operation of control systems. The document emphasizes that users are responsible for safely implementing and validating control systems using Vijeo Citect to minimize risks.
Similar to Occupational Health and Safety (OHS) Standards.pptx (20)
2 Occupational and Health Safety and PPE powerpoint .pptx
2 Occupational and Health Safety and PPE powerpoint .pptx
More from RochelMarin1
Geometry-Mathematical Ideas
This document contains notes on perimeter, area, and circumference from a geometry textbook chapter. It defines perimeter as the distance around a shape and area as the surface covered. Formulas are provided for calculating the perimeter and area of polygons like triangles, rectangles, squares, parallelograms, and trapezoids. Circumference is defined as the distance around a circle, and formulas show circumference is equal to pi times the diameter or twice pi times the radius. The area of a circle is equal to pi times the radius squared. Examples demonstrate calculating perimeter, area, and circumference for various shapes.
poetry_marin2.ppt
This document provides definitions and examples of different types and techniques of poetry. It begins by defining poetry as literary works that use distinctive styles and rhythm to express feelings and ideas. It then discusses the origin of the word poetry and provides definitions and examples of different types of poems, including narrative poetry, lyric poetry, sonnets, refrain poetry, odes, free verse, haiku, limericks, and irony poems. It also explains common poetic techniques such as meter, foot, stanza, couplet, and techniques used for poetic sound including rhythm, rhyme, alliteration, assonance, and onomatopoeia.
Matrix.pptx
This short document describes a woman named Matrix as beautiful, virgin, fresh, young, and wild in 5 bullet points using emoji symbols.
Writing-Action-Research-Proposal.pptx
The document outlines the process of writing an action research proposal, including defining action research, identifying the characteristics and steps in action research, and providing templates for an action research proposal. It discusses the purpose of action research as a process for educators to study problems in their own educational setting in order to improve practices. Key elements that are covered include identifying an issue to study, reviewing previous strategies, developing and implementing an intervention, analyzing findings, and making decisions on next steps.
Hazel Abria.pptx
The document discusses various methods for identifying and controlling workplace hazards and risks. It identifies observing the workplace, investigating complaints, examining records, and using checklists as ways to identify health and safety problems. The most effective control method is eliminating hazards at their source. Other control methods include using personal protective equipment, maintaining good housekeeping to prevent hazardous material accumulation, and ensuring emergency preparedness. Top tips for safe and comfortable work include proper lighting, workstation setup, ergonomic chair selection, and keeping frequently used equipment within easy reach.
lovely ann &Ailyn - IDENTIFY HAZARDS AND RISK.pptx
This document discusses occupational health and safety procedures for identifying hazards and risks when working with computers and technology. It outlines three key steps: 1) identifying hazards such as frayed cords or unstable stacks of boxes, 2) assessing the risk of hazards in terms of likelihood and severity of harm, and 3) controlling risks by fixing hazards or getting help from supervisors. Common physical, mechanical, chemical, electric, and CRT monitor hazards for computer technicians are described. The document also discusses applying 5S organization techniques like sorting, arranging, cleaning, standardizing, and sustaining clean workspaces to reduce hazards.
jackelyn - EVALUATE HAZARD AND RISK.pptx
Employers must take steps to protect employees who regularly use computers to prevent health issues like stress, neck, and back pain. Computer ergonomics aims to match tasks to the appropriate equipment to optimize well-being and performance. This includes adjusting work surfaces, chairs, keyboard and monitor placement, lighting, and taking breaks to prevent fatigue and awkward postures. Proper ergonomics is important for children using computers as well to encourage correct posture, viewing distance, time limits, and sized equipment.
jamaica - FLOWCHART.pptx
- A flowchart is a diagram that uses graphic symbols to depict the sequential steps in a process. It contains symbols like terminators, processes, sub-processes, decisions, connectors, and arrows.
- Flowcharts are useful for gaining agreement on process steps, training employees on standardized procedures, and identifying areas for process improvement by analyzing decision points and redundant or reworked steps.
- Common flowchart symbols include ovals for starting and ending points, boxes for individual steps, diamonds for decisions, circles for connecting to other pages, and triangles for in-process measurements.
Store and Stack kitchen tools and equipment.pptx
Here are 3 ways for proper storage of cleaning equipment:
1. Cleaning equipment like mops, brooms, and buckets should be stored in a clean, dry area away from food preparation surfaces to prevent cross-contamination.
2. Cleaning chemicals should be kept in their original containers and properly labeled. Store chemicals in a locked cabinet away from food items and areas accessible to children and pets.
3. Cleaning tools like sponges and cloths should be allowed to fully air dry before storing to prevent the growth of bacteria and molds. Store cleaning tools separately from food preparation utensils and equipment.
Maintain Kitchen Tools, Equipment and Working Area.pptx
This document discusses cleaning and sanitizing tools, equipment, and work areas in a kitchen. It explains that cleaning removes soil using detergents, solvents, acids, or abrasives, while sanitizing uses heat, radiation, or chemicals to reduce microorganisms. Common sanitizing methods are hot water above 171°F, or chemicals like chlorine, iodine, or quaternary ammonium compounds, which must meet certain concentration, temperature, and contact time standards to be effective. Proper cleaning is required before sanitizing. The document provides details on testing sanitizer strength and the advantages and disadvantages of different chemical sanitizers.
STORE APPETIZERS.pptx
This document provides guidelines for safely storing and preparing salads and salad dressings. It recommends refrigerating salads before and after serving to prevent spoiling. Dressing should be added just before serving to prevent salads from sagging. Proper hygiene is important, including washing hands and produce thoroughly with cool water. Fruits and vegetables should be stored refrigerated and washed, especially leafy greens, before consuming.
K TO 12 COMMERCIAL COOKING LEARNING MODULE.pdf
The document provides an exploratory module on commercial cooking for grades 7-8 that covers 5 lessons: using and maintaining kitchen tools and equipment, performing measurements and calculations, interpreting kitchen layouts, interpreting plans and drawings, and practicing occupational safety and health. It includes learning outcomes, materials, definitions, pre-tests, information sheets, activities, and scoring rubrics for assessing student learning in each lesson. The goal is for students to gain basic competencies in commercial cooking by the end of the module.
More from RochelMarin1 (13)
ARALING PANLIPUNAN 10 DISKRIMINASYON SA KABABAIHAN AT LGBTQ+.pptx
ARALING PANLIPUNAN 10 DISKRIMINASYON SA KABABAIHAN AT LGBTQ+.pptx
lovely ann &Ailyn - IDENTIFY HAZARDS AND RISK.pptx
lovely ann &Ailyn - IDENTIFY HAZARDS AND RISK.pptx
Maintain Kitchen Tools, Equipment and Working Area.pptx
Maintain Kitchen Tools, Equipment and Working Area.pptx
Recently uploaded
NURSING MANAGEMENT OF PATIENT WITH EMPHYSEMA .PPT
Prepared by Prof. BLESSY THOMAS, VICE PRINCIPAL, FNCON, SPN.
Emphysema is a disease condition of respiratory system.
Emphysema is an abnormal permanent enlargement of the air spaces distal to terminal bronchioles, accompanied by destruction of their walls and without obvious fibrosis.
Emphysema of lung is defined as hyper inflation of the lung ais spaces due to obstruction of non respiratory bronchioles as due to loss of elasticity of alveoli.
It is a type of chronic obstructive
pulmonary disease.
It is a progressive disease of lungs.
Hypotension and role of physiotherapy in it
This particular slides consist of- what is hypotension,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is the summary of hypotension:
Hypotension, or low blood pressure, is when the pressure of blood circulating in the body is lower than normal or expected. It's only a problem if it negatively impacts the body and causes symptoms. Normal blood pressure is usually between 90/60 mmHg and 120/80 mmHg, but pressures below 90/60 are generally considered hypotensive.
EXAMINATION OF HUMAN URINE AND FAECES.pdf
This presentation will help to develop in-depth knowledge of the examination of Urine and Faeces.
The Importance of Black Women Understanding the Chemicals in Their Personal C...
Certain chemicals, such as phthalates and parabens, can disrupt the body's hormones and have significant effects on health. According to data, hormone-related health issues such as uterine fibroids, infertility, early puberty and more aggressive forms of breast and endometrial cancers disproportionately affect Black women. Our guest speaker, Jasmine A. McDonald, PhD, an Assistant Professor in the Department of Epidemiology at Columbia University in New York City, discusses the scientific reasons why Black women should pay attention to specific chemicals in their personal care products, like hair care, and ways to minimize their exposure.
Pneumothorax and role of Physiotherapy in it.
This particular slides consist of- what is Pneumothorax,what are it's causes and it's effect on body, risk factors, symptoms,complications, diagnosis and role of physiotherapy in it.
This slide is very helpful for physiotherapy students and also for other medical and healthcare students.
Here is a summary of Pneumothorax:
Pneumothorax, also known as a collapsed lung, is a condition that occurs when air leaks into the space between the lung and chest wall. This air buildup puts pressure on the lung, preventing it from expanding fully when you breathe. A pneumothorax can cause a complete or partial collapse of the lung.
Enhancing Hip and Knee Arthroplasty Precision with Preoperative CT and MRI Im...
Enhancing Hip and Knee Arthroplasty Precision with Preoperative CT and MRI Im...Pristyn Care Reviews
Precision becomes a byword, most especially in such procedures as hip and knee arthroplasty. The success of these surgeries is not just dependent on the skill and experience of the surgeons but is extremely dependent on preoperative planning. Recognizing this important need, Pristyn Care commits itself to the integration of advanced imaging technologies like CT (Computed Tomography) and MRI (Magnetic Resonance Imaging) into the surgical planning process.Solution manual for managerial accounting 18th edition by ray garrison eric n...
Solution manual for managerial accounting 18th edition by ray garrison eric n...rightmanforbloodline
Solution manual for managerial accounting 18th edition by ray garrison eric noreen and peter brewer_compressed
Solution manual for managerial accounting 18th edition by ray garrison eric noreen and peter brewer_compressedDaughter's of Dr Ranjit Jagtap (Poulami & Aditi)
The story of Dr. Ranjit Jagtap's daughters is more than a tale of inherited responsibility; it's a narrative of passion, innovation, and unwavering commitment to a cause greater than oneself. In Poulami and Aditi Jagtap, we see the beautiful continuum of a father's dream and the limitless potential of compassion-driven healthcare.
India Medical Devices Market: Size, Share, and In-Depth Competitive Analysis ...
According to TechSci Research report, “India Medical Devices Market Industry Size, Share, Trends, Competition, Opportunity and Forecast, 2019-2029,” the India Medical Devices Market was valued at USD 15.35 billion in 2023 and is anticipated to witness impressive growth in the forecast period, with a Compound Annual Growth Rate (CAGR) of 5.35% through 2029. This growth is driven by various factors, including strategic collaborations and partnerships among leading companies, a growing population, and the increasing demand for advanced healthcare solutions.
Recent Trends
Strategic Collaborations and Partnerships
One of the most significant trends driving the India Medical Devices Market is the increasing number of collaborations and partnerships among leading companies. These alliances aim to merge the expertise of individual companies to strengthen their market position and enhance their product offerings. For instance, partnerships between local manufacturers and international companies bring advanced technologies and manufacturing techniques to the Indian market, fostering innovation and improving product quality.
Browse over XX market data Figures and spread through XX Pages and an in-depth TOC on " India Medical Devices Market.” - https://www.techsciresearch.com/report/india-medical-devices-market/8161.html
Sectional dentures for microstomia patients.pptx
Microstomia, characterized by an abnormally small oral aperture, presents significant challenges in prosthodontic treatment, including limited access for examination, difficulties in impression making, and challenges with prosthesis insertion and removal. To manage these issues, customized impression techniques using sectional trays and elastomeric materials are employed. Prostheses may be designed in segments or with flexible materials to facilitate handling. Minimally invasive procedures and the use of digital technologies can enhance patient comfort. Education and training for patients on prosthesis care and maintenance are crucial for compliance. Regular follow-up and a multidisciplinary approach, involving collaboration with other specialists, ensure comprehensive care and improved quality of life for microstomia patients.
R3 Stem Cell Therapy: A New Hope for Women with Ovarian Failure
Discover the groundbreaking advancements in stem cell therapy by R3 Stem Cell, offering new hope for women with ovarian failure. This innovative treatment aims to restore ovarian function, improve fertility, and enhance overall well-being, revolutionizing reproductive health for women worldwide.
2024 Media Preferences of Older Adults: Consumer Survey and Marketing Implica...
When it comes to creating marketing strategies that target older adults, it is crucial to have insight into their media habits and preferences. Understanding how older adults consume and use media is key to creating acquisition and retention strategies. We recently conducted our seventh annual survey to gain insight into the media preferences of older adults in 2024. Here are the survey responses and marketing implications that stood out to us.
VEDANTA AIR AMBULANCE SERVICES IN REWA AT A COST-EFFECTIVE PRICE.pdf
Air Ambulance Services In Rewa works in close coordination with ground-based emergency services, including local Emergency Medical Services, fire departments, and law enforcement agencies.
More@: https://tinyurl.com/2shrryhx
More@: https://tinyurl.com/5n8h3wp8
English Drug and Alcohol Commissioners June 2024.pptx
Presentation made by Mat Southwell to the Harm Reduction Working Group of the English Drug and Alcohol Commissioners. Discuss stimulants, OAMT, NSP coverage and community-led approach to DCRs. Focussing on active drug user perspectives and interests
Top 5 Benefits of Cancer Registry Services
Ensure the highest quality care for your patients with Cardiac Registry Support's cancer registry services. We support accreditation efforts and quality improvement initiatives, allowing you to benchmark performance and demonstrate adherence to best practices. Confidence starts with data. Partner with Cardiac Registry Support. For more details visit https://cardiacregistrysupport.com/cancer-registry-services/
Management of Post Operative Pain: to make doctors conscious about the benefi...
Multimodal analgesia.
Sexual Disorders.gender identity disorderspptx
Gender identity disorder, paraphilias , sexual dysfunction
nhs fpx 4000 assessment 4 analyzing a current health care problem or issue.pdf
nhs fpx 4000 assessment 4 analyzing a current health care problem or issue.pdf
nursing management of patient with Empyema ppt
prepared by Prof. BLESSY THOMAS, SPN
Empyema is a disease of respiratory system It is defines as the accumulation of thick, purulent fluid within the pleural space, often with fibrin development.
Empyema is also called pyothorax or purulent pleuritis.
It’s a condition in which pus gathers in the area between the lungs and the inner surface of the chest wall. This area is known as the pleural space.
Pus is a fluid that’s filled with immune cells, dead cells, and bacteria.
Pus in the pleural space can’t be coughed out. Instead, it needs to be drained by a needle or surgery.
Empyema usually develops after pneumonia, which is an infection of the lung tissue. it is mainly caused due in infectious micro-organisms. It can be treated with medications and other measures.
Recently uploaded (20)
The Importance of Black Women Understanding the Chemicals in Their Personal C...
The Importance of Black Women Understanding the Chemicals in Their Personal C...
Enhancing Hip and Knee Arthroplasty Precision with Preoperative CT and MRI Im...
Enhancing Hip and Knee Arthroplasty Precision with Preoperative CT and MRI Im...
Solution manual for managerial accounting 18th edition by ray garrison eric n...
Solution manual for managerial accounting 18th edition by ray garrison eric n...
India Medical Devices Market: Size, Share, and In-Depth Competitive Analysis ...
India Medical Devices Market: Size, Share, and In-Depth Competitive Analysis ...
R3 Stem Cell Therapy: A New Hope for Women with Ovarian Failure
R3 Stem Cell Therapy: A New Hope for Women with Ovarian Failure
2024 Media Preferences of Older Adults: Consumer Survey and Marketing Implica...
2024 Media Preferences of Older Adults: Consumer Survey and Marketing Implica...
VEDANTA AIR AMBULANCE SERVICES IN REWA AT A COST-EFFECTIVE PRICE.pdf
VEDANTA AIR AMBULANCE SERVICES IN REWA AT A COST-EFFECTIVE PRICE.pdf
English Drug and Alcohol Commissioners June 2024.pptx
English Drug and Alcohol Commissioners June 2024.pptx
Management of Post Operative Pain: to make doctors conscious about the benefi...
Management of Post Operative Pain: to make doctors conscious about the benefi...
nhs fpx 4000 assessment 4 analyzing a current health care problem or issue.pdf
nhs fpx 4000 assessment 4 analyzing a current health care problem or issue.pdf
Occupational Health and Safety (OHS) Standards.pptx
- 1. Occupational Health and Safety (OHS) Standards in CSS
- 2. REPUBLIC ACT NO. 11058 The Occupational Safety and Health Standards Formulated in 1978 in compliance with the constitutional mandate to safeguard the worker’s social and economic well-being as well as his physical safety and health.
- 3. Occupational Health and Safety (OHS) Standards in CSS 1.Do not work alone so that there’s someone who can take care of you in case of emergency.
- 4. 2. Always power off and unplug the computer before working on it.
- 5. 3. Take away any liquid near your working area to avoid getting electrocuted or accidentally damaging computer parts. 4. Be careful with tools that may cause short circuit. 5. Always ground or discharge yourself before touching any parts of the computer.
- 6. 6. Do not use excessive force if things don’t quite slip into place. 7. Clean the area before and after using it to maintain sanitation and prevent accidents. 8. Hold the components on the edges and do not touch the Integrated Circuit (IC) parts.
- 7. 9. Always wear personal protective equipment (PPE) in accordance with the organization’s OHS procedures and practices. 10. Make sure that the pins are properly aligned when connecting a cable connector. 11. Contingency measures during workplace accidents, fire and other emergencies are recognized.
- 8. 12. Use brush, compressed air blower in cleaning the computer system.
- 9. How can Occupational Health and Safety (OHS) Standards help you as a student in CSS?