Maximizing network topology lifetime using mobile node rotation

•Download as DOCX, PDF•

0 likes•116 views

NS2 Projects for M. Tech, NS2 Projects in Vijayanagar, NS2 Projects in Bangalore, M. Tech Projects in Vijayanagar, M. Tech Projects in Bangalore, NS2 IEEE projects in Bangalore, IEEE 2015 NS2 Projects, WSN and MANET Projects, WSN and MANET Projects in Bangalore, WSN and MANET Projects in Vijayangar

Engineering

Logic Mind Technologies
Vijayangar (Near Maruthi Medicals), Bangalore-40
Ph: 8123668124 // 8123668066
Maximizing Network Topology Lifetime
Using Mobile Node Rotation
Abstract
One of the key challenges facing wireless sensor networks (WSNs) is extending network lifetime
due to sensor nodes having limited power supplies. Extending WSN lifetime is complicated
because nodes often experience differential power consumption. For example, nodes closer to the
sink in a given routing topology transmit more data and thus consume power more rapidly than
nodes farther from the sink. Inspired by the huddling behavior of emperor penguins where the
penguins take turns on the cold extremities of a penguin “huddle”, we propose mobile node
rotation, a new method for using low-cost mobile sensor nodes to address differential power
consumption and extend WSN lifetime. Specifically, we propose to rotate the nodes through the
high power consumption locations. We propose efficient algorithms for single and multiple
rounds of rotations. Our extensive simulations show that mobile node rotation can extend WSN
topology lifetime by more than eight times on average which is significantly better than existing
alternatives.

SYSTEM SPECIFICATION
Software Specification
Operating system : Linux (Ubuntu)
Software : Network Simulator 2.35
Programming languages : Tool Command Language, AWK, C++
Hardware Specification
Main processor : Dual Core
Hard disk capacity : 80GB
Cache memory : 2 GB
PROJECT FLOW:
First Review:
Literature Survey
Paper Explanation
Design of Project
Project Enhancement explanation
Second Review:
Implementing 40% of Base Paper
Third Review
Implementing Remaining 60% of Base Paper with Future Enhancement (Modification)
For More Details please contact
Logic Mind Technologies
Vijayangar (NearMaruthi Medicals), Bangalore-40
Ph: 8123668124 // 8123668066
Mail: logicmindtech@gmail.com

What's hot

Metamaterial

Khalid Saeed Al-Badri

International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.

Ac36167172

IJERA Editor

In recent years there has been an increased focus on the use of sensor networks to sense and measure the environment. This leads to a wide variety of theoretical and practical issues on appropriate protocols for data sensing and transfer. Recent work shows sink mobility can improve the energy efficiency in wireless sensor networks (WSNs). However, data delivery latency often increases due to the speed limit of mobile sink. Most of them exploit mobility to address the problem of data collection in WSNs. The WSNs with MS (mobile Sink) and provide a comprehensive taxonomy of their architectures, based on the role of the MS. An overview of the data collection process in such a scenario, and identify the corresponding issues and challenges. A protocol named weighted rendezvous planning (WRP) which is a heuristic method that finds a near-optimal traveling tour that minimizes the energy consumption of sensor nodes. Focus on the path selection problem in delay-guaranteed sensor networks with a path-constrained mobile sink. Concentrate an efficient data collection scheme, which simultaneously improves the total amount of data and reduces the energy consumption. The optimal path is chosen to meet the requirement on delay as well as minimize the energy consumption of entire network. Predictable sink mobility is exploited to improve energy efficiency of sensor networks.

ENERGY EFFICIENT MULTIHOP QUALITY PATH BASED DATA COLLECTION IN WIRELESS SENS...

Editor IJMTER

Communication with atom is possible

Sanket Tambakhe

2 ijcse-01208

Shivlal Mewada

F017544247

IOSR Journals

Smart dust techno

Chaudhary Kumar Singh

AN EFFICIENT SLEEP SCHEDULING STRATEGY FOR WIRELESS SENSOR NETWORK

ijceronline

E044033136

IJERA Editor

Laser communication

Sai Debasis Mohanty

Computational Analysis of Routing Algorithm for Wireless Sensor Network

IRJET Journal

The Wireless Sensor Networks (WSN) is considered to be one of the most promising emerging technologies. However one of the main constraints which is holding back its wide range of applications is the battery life of the sensor node and thus effecting the network life. A new approach to this problem has been presented in this paper. The proposed method is suitable for event driven applications where the event occurrence is very rare. The system uses spread spectrum as a means of communication.

Spread Spectrum Based Energy Efficient Wireless Sensor Networks

IDES Editor

Toward efficient task management in wireless sensor networks

Naveena N

IRJET- An Hybrid Approach for Enhancement of Energy and Network Life Time...

IRJET Journal

Wireless power

ahmed usama

In the recent years, wireless sensor network (WSN) have witnessed increased interest in information gathering in applications such as combat field reconnaissance, security surveillance, environmental monitoring, patient health monitoring and so on. Thus, there is a need for scalable and energy-efficient routing, data gathering and aggregation protocols in these WSN environments. Various hierarchical clustering Protocols have been proposed by authors for WSN to improve system stability, lifetime, and energy efficiency. Clustering involves grouping nodes into disjoint and non-overlapping clusters. In this paper we motivate the need for clustering. Secondly, we present general classification of published clustering schemes. Thirdly, we review some existing clustering algorithms proposed for WSNs; highlighting their objectives, features, and so on. Finally, we develop an Average Energy (AvE) prediction algorithm using exponential decay function y=Ae-ax+B. We then combine this function with the probabilistic distributed LEACH of algorithm to determine suitable CHs. The combined algorithm was implemented on MATLAB simulator and tested for homogenous network. The result gathered from the simulation shows that the extended algorithm in homogenous network mode is able to achieve 39% stability, 11% Average energy Dissipation per round and 40% Lifespan better than LEACH-Homo. This paper proposes a new direction in improving energy efficiency of WSN routing protocol, which is desirable in some critical WSN applications. .

ENERGY EFFICIENT HIERARCHICAL CLUSTER HEAD ELECTION USING EXPONENTIAL DECAY F...

ijwmn

In this paper, we explored the possibility of using Genetic Algorithm (GA) being used in Wireless Sensor Networks in general with specific emphasize on Fault tolerance. In Wireless sensor networks, usually sensor and sink nodes are separated by long communication distance and hence to optimize the energy, we are using clustering approach. Here we are employing improved K-means clustering algorithm to form the cluster and GA to find optimal use of sensor nodes and recover from fault as quickly as possible so that target detection won’t be disrupted. This technique is simulated using Matlab software to check energy consumption and lifetime of the network. Based on the simulation results, we concluded that this model shows significant improvement in energy consumption rate and network lifetime than other method such as Traditional clustering or Simulated Annealing

A Fault tolerant system based on Genetic Algorithm for Target Tracking in Wir...

Editor IJCATR

Ijarcet vol-2-issue-3-916-919

Editor IJARCET

In a Wireless Sensor Network (WSN) having a single sink, information is given to the distant nodes from beacons by overhearing. Since it is out of the communication range, information is not sent directly to the static sink (SS). If a distant node is not able to communicate directly, then it should send its own packet to another node which is closer to the Base Station (BS) so that the received packets are relayed to the BS by this node. In this paper, we propose a relay node selection algorithm to reduce contention and improve energy efficiency. In this algorithm, each data packet of direct communication should include the received signal strength (RSS) of the beacon packet. The distant node selects a node with the maximum RSS value as a relay. The algorithm also assigns transmitting intervals to each relay node. By our simulation results, we show that our proposed algorithm improves the packet delivery ratio and energy efficiency.

Energy Efficient Data Transmission through Relay Nodes in Wireless Sensor Net...

IDES Editor

What's hot (19)

Metamaterial

Ac36167172

ENERGY EFFICIENT MULTIHOP QUALITY PATH BASED DATA COLLECTION IN WIRELESS SENS...

Communication with atom is possible

2 ijcse-01208

F017544247

Smart dust techno

AN EFFICIENT SLEEP SCHEDULING STRATEGY FOR WIRELESS SENSOR NETWORK

E044033136

Laser communication

Computational Analysis of Routing Algorithm for Wireless Sensor Network

Spread Spectrum Based Energy Efficient Wireless Sensor Networks

Toward efficient task management in wireless sensor networks

IRJET- An Hybrid Approach for Enhancement of Energy and Network Life Time...

Wireless power

ENERGY EFFICIENT HIERARCHICAL CLUSTER HEAD ELECTION USING EXPONENTIAL DECAY F...

A Fault tolerant system based on Genetic Algorithm for Target Tracking in Wir...

Ijarcet vol-2-issue-3-916-919

Energy Efficient Data Transmission through Relay Nodes in Wireless Sensor Net...

Similar to Maximizing network topology lifetime using mobile node rotation

Performance Evaluation of Ant Colony Optimization Based Rendezvous Leach Usin...

IJERD Editor

Single Sink Repositioning Technique in Wireless Sensor Networks for Network L...

IRJET Journal

The main motive of this research is to study energy-efficient data-gathering mechanisms to abnormal packet data for saving the energy. To detect the abnormal packet irregularities is useful for saving energy, as well as for management of network, because the patterns found can be used for both decision making in applications and system performance tuning. Node distribution in WSNs is either deterministic or self-organizing and application dependant. The sensor nodes in WSNs have minimum energy and they use their energy for communication and sensing.

A Review Study on Shortest Path in WSN to detect the Abnormal Packet for savi...

Editor IJMTER

There are numerous applications for wireless sensor networks which are inevitable now a day in our daily life. Majority of such applications which use wireless sensor networks will be in areas where the direct human intervention is impossible. So the limited energy available in such sensors is a threat for prolonging the life of the entire network. The need of energy efficiency in wireless sensor networks is a hot research topic in which lot of new strategies for improvement in energy efficiency has been sought after. As communication process consumes more energy, an energy efficient routing strategy can probably reduce the energy consumption to a great extend. This paper gives an overview of the different routing techniques in which mobile sinks are used to facilitate the routing process which can effectively reduce the energy use. A new routing strategy with mobile sinks and a static sink is proposed and is compared based on the matrices life time and average energy of the nodes with the existing Shortest Hop path (SH) algorithm. The simulation results shows the proposed algorithm is more energy efficient than the existing one.

A novel energy efficient routing algorithm for wireless sensor networks using...

ijwmn

Iisrt divya nagaraj (networks)

IISRT

Ijetr021229

Engineering Research Publication

Ijetr021229

ER Publication.org

Opportunistic routing algorithm for relay node selection in wireless sensor n...

LogicMindtech Nologies

IRJET- Studies on Lifetime Enhancement Techniques for Wireless Sensor Network

IRJET Journal

Much research on wireless networks have focused on the power consumption of the wireless nodes, while at the same time how to acquire power from ambient environment is another direction to extend the battery lifetime. Though, mostly extending the lifetime of WSNs rely on making the electronic circuitry power efficient by incorporating advances in node architecture, transceivers, access protocols and on finite energy sources like batteries. In contrast, WSNs Powered by Ambient Energy Harvesting can also prove to be useful and economical in the longterm as they can operate for very long periods of time until hardware failure, because ambient energy can be harvested from the environment perpetually. Although cellular networks account for a rather small share of energy use, lowering their energy consumption appears beneficial from an economical perspective. In the strive for lessening of the environmental impact of the information and communication industry, energy consumption of communication networks has recently received increased attention. The paper discusses the various techniques for increasing the life of WSNs.

A STUDY OF POWER SAVING TECHNIQUE IN WIRELESS NETWORKS

cscpconf

Energy Optimization in Heterogeneous Clustered Wireless Sensor Networks

IRJET Journal

Ijetcas14 591

Iasir Journals

A Novel Routing Algorithm for Wireless Sensor Network Using Particle Swarm O...

IOSR Journals

Most studies define a common duty cycle value throughout the wireless sensor networks (WSNs) to achieve synchronization among the nodes. On the other hand, a few studies proposed adaptation of the duty cycle according to uniform traffic conditions to decrease the energy consumption and latency. In this paper, the lifetime of the nodes based on overall energy consumption are estimated and the effect of duty cycle on expected energy consumption is studied. The proposed scheme is compared with a standard scheme and is shown to perform significantly better for sufficient node density.

EFFECT OF DUTY CYCLE ON ENERGY CONSUMPTION IN WIRELESS SENSOR NETWORKS

IJCNC

De3211001104

IJMER

Abstract: Multipath routing is an efficient technique to route data in wireless sensor networks (WSNs) because it can provide reliability, security and load balance, which are particularly critical in the resource constrained system such as WSNs. The existing protocols are not fully satisfied. In this paper propose a new routing protocol that is enhanced zigbee tree routing (EZTR), to satisfy the QoS parameters. The new protocol provides less delay as compared with other protocol.

Enhanced Zigbee Tree Routing In Wireless Sensor Network

paperpublications3

Wireless sensor network (WSN) is the network of hundreds and thousands of micro-sensor nodes, connecting each other by a wireless medium.WSN provide reliable sensing of the environment, detecting and reporting events to the sink. One of the most important constraints of WSN is energy consumption. Since the micro sensors are small in dimension, batteries are necessary to produce power to the network. In this paper, we have proposed an algorithm for hierarchy based protocols of wireless sensor networks, which consist of two groups of sensor nodes in a single cluster node. Each cluster consists of a three cluster head. The event driven data sensing mechanism is used in this paper and this sensed data is transmitted to the master section head. The gathered data is transmitted to the sink via mobile agent. Hence efficient way of data transmission is possible with larger group of nodes. In this approach of using hierarchy based protocols; the lifetime of the sensor network is increased. This paper proposes an innovative approach of cluster head election. The results are compared with LEACH protocol and proved to be energy efficient.

EFFICIENT HIERARCHICAL ROUTING PROTOCOL IN SENSOR NETWORKS

ijassn

A Survey on Secure Alternate Path Selection for Enhanced Network Lifetime in ...

IRJET Journal

The use of Wireless Sensor Networks (WSNs) is anticipated to bring lot of changes in data gathering, processing and dissemination for different environments and applications. However, a WSN is a power constrained system, since nodes run on limited power batteries which shorten its lifespan. Prolonging the network lifetime depends on efficient management of sensing node energy resource. Energy consumption is therefore one of the most crucial design issues in WSN. Hierarchical routing protocols are best known in regard to energy efficiency. By using a clustering technique hierarchical routing protocols greatly minimize energy consumed in collecting and disseminating data. To prolong the lifetime of the sensor nodes, designing efficient routing protocols is critical. In this paper, we have discussed various energy efficient data aggregation protocols for sensor networks.

Energy Efficient Data Aggregation in Wireless Sensor Networks: A Survey

ijsrd.com

A wireless sensor network is composed of many sensor nodes, that have beengiven out in a specific zoneandeach of them hadanability of collecting information from the environment and sending collected data to the sink. The most significant issues in wireless sensor networks, despite the recent progress is the trouble of the severe limitations of energy resources.Since that in different applications of sensor nets, we could throw a static or mobile sink, then all aspects of such networks should be planned with an awareness of energy.One of the most significant topics related to these networks, is routing. One of the most widely used and efficient methods of routing isa hierarchy (based on clustering) method.

CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...

ijwmn

Similar to Maximizing network topology lifetime using mobile node rotation (20)

Performance Evaluation of Ant Colony Optimization Based Rendezvous Leach Usin...

Single Sink Repositioning Technique in Wireless Sensor Networks for Network L...

A Review Study on Shortest Path in WSN to detect the Abnormal Packet for savi...

A novel energy efficient routing algorithm for wireless sensor networks using...

Iisrt divya nagaraj (networks)

Ijetr021229

Opportunistic routing algorithm for relay node selection in wireless sensor n...

IRJET- Studies on Lifetime Enhancement Techniques for Wireless Sensor Network

A STUDY OF POWER SAVING TECHNIQUE IN WIRELESS NETWORKS

Energy Optimization in Heterogeneous Clustered Wireless Sensor Networks

Ijetcas14 591

A Novel Routing Algorithm for Wireless Sensor Network Using Particle Swarm O...

EFFECT OF DUTY CYCLE ON ENERGY CONSUMPTION IN WIRELESS SENSOR NETWORKS

De3211001104

Enhanced Zigbee Tree Routing In Wireless Sensor Network

EFFICIENT HIERARCHICAL ROUTING PROTOCOL IN SENSOR NETWORKS

A Survey on Secure Alternate Path Selection for Enhanced Network Lifetime in ...

Energy Efficient Data Aggregation in Wireless Sensor Networks: A Survey

CUTTING DOWN ENERGY USAGE IN WIRELESS SENSOR NETWORKS USING DUTY CYCLE TECHNI...

Recently uploaded

UNIT-2 image enhancement.pdf Image Processing Unit 2 AKTU

ankushspencer015

The project entitled as “Insurance Management System” is developed in a manner to help all the Insurance Agency Members. It is developed using Visual Basic 6.0 as Front-End and MS Access as the Back-End tool. The system is designed in such a way that it accepts and stores the input data, process and produce output under the direction of a detailed step by step stored programmed instruction. This system includes Client Dairy, Client Details, Add new Client, Policy Details and Payment Details information’s and gives details based on the policy Number of the client. This system is necessary for Storing Information, assessing Workload and hence their efficiency. The System provides the adequate information to the concern for its smooth run.

Insurance management system project report.pdf

Kamal Acharya

Exploring AI's Impact: Key Features in Due Diligence In the realm of due diligence, AI emerges as a game-changer, revolutionizing traditional methods with its advanced features. AI-powered algorithms excel in data analysis, swiftly sifting through vast amounts of information for crucial insights. Automation streamlines document review processes, ensuring accuracy and efficiency. Moreover, AI enables predictive analytics, forecasting potential risks and opportunities with precision. With machine learning capabilities, AI continuously improves its performance, adapting to evolving trends and patterns. By integrating AI into due diligence practices, businesses gain a competitive edge, maximizing efficiency and making informed decisions swiftly. AI in due diligence is not just a tool; it's a transformational force driving businesses into the future. https://www.leewayhertz.com/ai-in-due-diligence/

Artificial Intelligence in due diligence

mahaffeycheryld

21scheme vtu syllabus of visveraya technological university

Mohd Saifudeen

Circuit Breakers for Engineering Students

kannan348865

UNIT 4 PTRP final Convergence in probability.pptx

kalpana413121

This research is developing an incubator system that integrates the internet of things and artificial intelligence to improve care for premature babies. The system workflow starts with sensors that collect data from the incubator. Then, the data is sent in real-time to the internet of things (IoT) broker eclipse mosquito using the message queue telemetry transport (MQTT) protocol version 5.0. After that, the data is stored in a database for analysis using the long short-term memory network (LSTM) method and displayed in a web application using an application programming interface (API) service. Furthermore, the experimental results produce as many as 2,880 rows of data stored in the database. The correlation coefficient between the target attribute and other attributes ranges from 0.23 to 0.48. Next, several experiments were conducted to evaluate the model-predicted value on the test data. The best results are obtained using a two-layer LSTM configuration model, each with 60 neurons and a lookback setting 6. This model produces an R 2 value of 0.934, with a root mean square error (RMSE) value of 0.015 and a mean absolute error (MAE) of 0.008. In addition, the R 2 value was also evaluated for each attribute used as input, with a result of values between 0.590 and 0.845.

Developing a smart system for infant incubators using the internet of things ...

IJECEIAES

handbook on reinforce concrete and detailing

AshishSingh1301

Artificial intelligence presentation2-171219131633.pdf

Kira Dess

We investigated the applicability and efficiency of the MLMC approach to the Henry-like problem with uncertain porosity, permeability and recharge. These uncertain parameters were modelled by random fields with three independent random variables. Permeability is a function of porosity. Both functions are time-dependent, have multi-scale behaviour and are defined for two layers. The numerical solution for each random realisation was obtained using the well-known ug4 parallel multigrid solver. The number of random samples required at each level was estimated by calculating the decay of the variances and the computational cost for each level. The MLMC method was used to compute the expected value and variance of several QoIs, such as the solution at a few preselected points $(t,\bx)$, the solution integrated over a small subdomain, and the time evolution of the freshwater integral. We have found that some QoIs require only 2-3 mesh levels and samples from finer meshes would not significantly improve the result. Other QoIs require more grid levels.

litvinenko_Henry_Intrusion_Hong-Kong_2024.pdf

Alexander Litvinenko

Involute of a circle,Square, pentagon,HexagonInvolute_Engineering Drawing.pdf

JNTUA

Independent Solar-Powered Electric Vehicle Charging Station

siddharthteach18

The Entity-Relationship Model(ER Diagram).pptx

MANASINANDKISHORDEOR

Adsorption (mass transfer operations 2) ppt

jigup7320

It is a new concept in town planning, and it may have a highly positive impact on cities and communities. It not only promotes sustainability but also helps increase the health of people and boost the economy. Although it has a lot of advantages, critics argue that this concept is not for all cities and describe its effects as well. New cities should follow this pattern to build and develop their cities

15-Minute City: A Completely New Horizon

Morshed Ahmed Rahath

Worksharing and 3D Modeling with Revit.pptx

Mustafa Ahmed

SLIDESHARE PPT-DECISION MAKING METHODS.pptx

CHAIRMAN M

NO1 Best Powerful Vashikaran Specialist Baba Vashikaran Specialist For Love V...

Amil baba

Dynamo Scripts for Task IDs and Space Naming.pptx

Mustafa Ahmed

Basics of Relay for Engineering Students

kannan348865

Recently uploaded (20)

UNIT-2 image enhancement.pdf Image Processing Unit 2 AKTU

Insurance management system project report.pdf

Artificial Intelligence in due diligence

21scheme vtu syllabus of visveraya technological university

Circuit Breakers for Engineering Students

UNIT 4 PTRP final Convergence in probability.pptx

Developing a smart system for infant incubators using the internet of things ...

handbook on reinforce concrete and detailing

Artificial intelligence presentation2-171219131633.pdf

litvinenko_Henry_Intrusion_Hong-Kong_2024.pdf

Involute of a circle,Square, pentagon,HexagonInvolute_Engineering Drawing.pdf

Independent Solar-Powered Electric Vehicle Charging Station

The Entity-Relationship Model(ER Diagram).pptx

Adsorption (mass transfer operations 2) ppt

15-Minute City: A Completely New Horizon

Worksharing and 3D Modeling with Revit.pptx

SLIDESHARE PPT-DECISION MAKING METHODS.pptx

NO1 Best Powerful Vashikaran Specialist Baba Vashikaran Specialist For Love V...

Dynamo Scripts for Task IDs and Space Naming.pptx

Basics of Relay for Engineering Students

Maximizing network topology lifetime using mobile node rotation

1. Logic Mind Technologies Vijayangar (Near Maruthi Medicals), Bangalore-40 Ph: 8123668124 // 8123668066 Maximizing Network Topology Lifetime Using Mobile Node Rotation Abstract One of the key challenges facing wireless sensor networks (WSNs) is extending network lifetime due to sensor nodes having limited power supplies. Extending WSN lifetime is complicated because nodes often experience differential power consumption. For example, nodes closer to the sink in a given routing topology transmit more data and thus consume power more rapidly than nodes farther from the sink. Inspired by the huddling behavior of emperor penguins where the penguins take turns on the cold extremities of a penguin “huddle”, we propose mobile node rotation, a new method for using low-cost mobile sensor nodes to address differential power consumption and extend WSN lifetime. Specifically, we propose to rotate the nodes through the high power consumption locations. We propose efficient algorithms for single and multiple rounds of rotations. Our extensive simulations show that mobile node rotation can extend WSN topology lifetime by more than eight times on average which is significantly better than existing alternatives.

2. SYSTEM SPECIFICATION Software Specification Operating system : Linux (Ubuntu) Software : Network Simulator 2.35 Programming languages : Tool Command Language, AWK, C++ Hardware Specification Main processor : Dual Core Hard disk capacity : 80GB Cache memory : 2 GB PROJECT FLOW: First Review: Literature Survey Paper Explanation Design of Project Project Enhancement explanation Second Review: Implementing 40% of Base Paper Third Review Implementing Remaining 60% of Base Paper with Future Enhancement (Modification) For More Details please contact Logic Mind Technologies Vijayangar (NearMaruthi Medicals), Bangalore-40 Ph: 8123668124 // 8123668066 Mail: logicmindtech@gmail.com

Maximizing network topology lifetime using mobile node rotation

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Similar to Maximizing network topology lifetime using mobile node rotation

Similar to Maximizing network topology lifetime using mobile node rotation (20)

More from LogicMindtech Nologies

More from LogicMindtech Nologies (20)

Recently uploaded

Recently uploaded (20)

Maximizing network topology lifetime using mobile node rotation