1. Nabil Suleiman
E-mail: syleimann@rambler.ru
Mobile No.: +971 – 56 153 53 03
+7-999-025-10-30, +7-921-
5005074
Senior Equipment Engineer
Objective:
Seeking to obtain a responsible position in mechanical management where my skills, knowledge and
experience will be contributed towards the improvement of the company. My 13+ years of experience with
sound knowledge in Mechanical Engineering.
Professional Synopsis
Over 13+ years’ of experience in the areas of mechanical Engineering. Acting as section head of Equipment
department (rotating and static). A thorough professional with a proactive attitude, capable of thinking in
and out of the box. Communication and organizational skills with proven abilities and the drive to achieve
success. (Russian, English and Arabic fluent).
Technical Skills
☼ Creating / participating in installation, alignment, final handing over and preservation for the
equipment (all types)
☼ Capability to create Method Statements and Risk Assessments for site activities
☼ Installation & Inspection for all types of equipment (Pumps, Towers and internals, Turbines, Gas
Compressors Low-Medium-High pressure, Pressure Vessels, Heat Exchangers, Air Buffers,
Reactors, Steel Structure.
Management Skills
☼ Directing and controlling the planning.
☼ Controlling equipment department and activities
☼ Liaise with staff to ensure that certain tasks are accomplished on schedule and in accordance
with the set guidelines.
☼ Act as an information resource and refer inquires to the appropriate department or individual
when necessary.
☼ Sort, prioritize and reply to correspondence received.
☼ Being fully conversant with all the activities of the department.
☼ Prepare weekly consolidated reports.
Specific Strengths
☼ Radical thinking. Innovative and creative.
☼ Ability to work independently and as part of a team.
☼ Strongly self-motivated, committed and willing to resume responsibilities with best possible
results under extreme work pressure
☼ Excellent communication and interpersonal skills.
☼ Adaptable to diversified work environment and learning.
☼ Smart working pattern for the betterment of people I am involved with.
Software Skills
☼ Others : AutoCAD, Solid Works, Pro-Engineer, Mat Cad, Computer Programming
Hardwiring, Networking & Internet, VBC, Atlas, Navis Works
Qualifications
i. Master Degree in Heavy Equipment (Saint Petersburg - Polytechnic University)
ii. Mechanical Engineer in Heavy Equipment (Saint Petersburg - Polytechnic University)
iii. Occupational Safety and Health Administration (OSHA)
Trainings
2. i. Basic Offshore Safety Induction Emergency Training ( BOSIET OPITO Approved) from
“Gulf Technical & Safety Training Centre”
ii. Basic H2S Training (BOSIET OPITO Approved) from “Gulf Technical & Safety Training Centre”
3. Professional Experience:
Current Employer : PETROFAC International (UAE) LLC
Position Held : Senior Mechanical & Equipment Engineer
Projects : Upper Zakum 750, Island Surface Facilities Project – EPC 2,
Abu Dhabi, United Arab Emirates
Period : April 2015 till date
Scope of Responsibilities:
Assist in coordinating and consulting the subcontractors as “Descon Engineering” & “Al Jaber
Engineering” & “HLG”
Job Description :
☼ Review design deliverables
☼ Participate in the engineering reviews and reviewing datasheets and material requisitions.
☼ Participate in safety activities
☼ Participate in Peer Assists, Peer Reviews, HSE reviews and Value Improving Workshops
☼ Liaise with Operations to ensure that maintainability issues are addressed in the design process
☼ Work with design Contractor's Interface Engineers to ensure that interfaces are well controlled
Previous Employer : Consolidated Contractor International Company (CCIC)
Position Held : Section Head – Equipment Department
Project : Shah Sulphur Station & Pipeline Project
(Al Hosn Gas – Shah), Abu Dhabi, U.A.E.
Period : November 2012 to January 2015
Job Description :
☼Controlling equipment department, insulation, preservation procedures (P&P),
☼Vendor (FAM & Enersul) requirements & Right First Time Start-up (RFTSU) & (DCS).
☼Preparing Method Statements and Risk Assessments for site activities
☼Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation,
Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, Loading of catalyst,
chemicals, Support balls, Vessel Box-up, etc.
☼Installation & Inspection of Air Fin Cooler & Air cooled surface condenser & HVAC system include
Alignment of setting plate, structure, tube bundle, louver, shaft, pulley, Blade Angle, Tip clearance,
Belt tension, pressure testing / Dew point inspection for tube bundles, solo run of motor, Completion
of inspection records etc.
☼Leading a construction team of one junior engineer, three supervisors, Four Foremen and 150 workers.
☼Assuring adequately timed equipment (Rotary & Static) supply to site through proper look ahead and
communication between both internal departments and partner procurement.
☼Schedule follow up and updating according to site conditions.
☼Assuring safety awareness of subordinates through daily and weekly toolbox meetings.
☼Familiar with Piping Test Pack review, Line walk down and Punching, Pressure Test, documentation
4. Previous Employer : Consolidated Contractor International Company (CCIC).
Position Held : Senior Equipment Engineer
Projects : Borouge EU3 Project, Abu Dhabi, UAE
Period : September 2011 to November 2012
Job Description :
☼ Participating to Client/Partner construction coordination meetings on the CM/ senior control level.
☼ Tested, installed, commissioned static equipment associated with the Oil & Gas Industry
☼ Administered mechanical project teams and outlined the scope of work.
☼ Preparation of specifications for heat exchangers of oil and gas industries
☼ Reparation of technical bid evaluation
☼ Attending client, vendor meeting.
☼ Familiar with Piping Test Pack review, Line walk down and Punching, Pressure Test, documentation
☼ Installation & Inspection for Rotary and static Equipment.
☼ Levelness, Pre-shaft alignment, Run-out, Void, Surveillance inspection during erection and welding of
Piping, Pipe Strain, Motor / Turbine solo run, Final shaft alignment, Prep. of Graph, P&ID Verification,
Lube oil Flushing Inspection, Mechanical Running test, Completion of inspection records etc.
☼ Leading a construction team of two junior engineers, six supervisors, twelve Foremen and 200
workers.
☼ Schedule follow up and updating according to site conditions.
☼ Quantity reporting to project control manager.
☼ Detailing look-ahead schedules for closely upcoming activities and passing on detailed and clear
instructions for preparations to subordinates.
☼ Quality monitoring through pre-release inspections and assuring proper procedures and
tool/equipment usage.
☼ Assuring safety awareness of subordinates through daily and weekly toolbox meetings.
☼ Prepared Method of Statements and Risk Assessments for site activities
Previous Employer : Elenco Emirate Group
Position Held : Production Manager
Period : April 2006 to February 2010
Job Description
☼ Managing Maintenance and Production of Insulating Materials (PIR, PUR, Rockwool, Cellular
Glass, etc.)
☼ Managing Rockwool products, cellular glass and foam glass, fabrication and installation.
☼ Installation & Inspection HVAC system (duct, chillers, Insulating Materials, etc.)
☼ CNC Machine Tool Service Engineer and CNC Programmer
☼ Controlling QA/QC department
☼ Coordinating with Procurement and Sales departments
☼ Managing of Materials
☼ Coordinating with Planning and Estimation departments
5. Previous Employer : Military House Est. Syria
Position Held : Mechanical Engineer
Period : August 2003 to February 2006
Job Description
☼ Supervising Cranes and Lifters maintenance
☼ Managing 10 technicians
☼ Reporting to Operations Manager
Key Skills
☼ Exceptional management and organizational skills.
☼ Ability to work in stress environment
☼ Effective written and oral communication skills.
☼ Fluent in English, Arabic & Russian language
☼ In depth knowledge of MS Word, MS Excel, MS Power point, and Internet.
☼ Extremely detail oriented with good analytical skills.
☼ Able to work without help in fast paced environment.
☼ Capability to create professional and safe work environment.
☼ Planning and organizing as per Requirement
☼ Decision making
☼ Excellent communication & influencing skills
☼ Accuracy/Attention to details
Personal Details
Name : Nabil Suleiman
Nationality : Russian
Date of Birth : 13th
April 1974
Driving License : UAE, Syrian, Russian
Marital Status : Married
Language Known : English, Arabic & Russian.
6. Previous Employer : Military House Est. Syria
Position Held : Mechanical Engineer
Period : August 2003 to February 2006
Job Description
☼ Supervising Cranes and Lifters maintenance
☼ Managing 10 technicians
☼ Reporting to Operations Manager
Key Skills
☼ Exceptional management and organizational skills.
☼ Ability to work in stress environment
☼ Effective written and oral communication skills.
☼ Fluent in English, Arabic & Russian language
☼ In depth knowledge of MS Word, MS Excel, MS Power point, and Internet.
☼ Extremely detail oriented with good analytical skills.
☼ Able to work without help in fast paced environment.
☼ Capability to create professional and safe work environment.
☼ Planning and organizing as per Requirement
☼ Decision making
☼ Excellent communication & influencing skills
☼ Accuracy/Attention to details
Personal Details
Name : Nabil Suleiman
Nationality : Russian
Date of Birth : 13th
April 1974
Driving License : UAE, Syrian, Russian
Marital Status : Married
Language Known : English, Arabic & Russian.