Ihsan Ul Haq has nearly 20 years of experience in quality assurance and control, piping operations, and plumbing/HVAC engineering. He currently works as an underground piping and plumbing engineer for GIS Bureau Veritas in Saudi Arabia. He has extensive expertise in inspection, testing, and commissioning of piping systems, plumbing, and HVAC. He also specializes in developing conceptual designs, reviewing inspection plans, and supervising contractors to ensure compliance with codes and standards.

1. Key Skills Profile Summary
Approved Plumbing / Piping Inspection Engineer with B.Tech. (Mechanical
Engineering), leveraging nearly 20 years of dynamic career in Quality
Assurance & Control & Piping Operations
Currently associated with GIS Bureau Veritas (Aramco Approved) Jizan
economical city Baish, Saudi Arabia as Underground Piping and Plumbing
Engineer
Acknowledged for working as QA/QC, Mechanical, Plumbing, HVAC
Engineer in construction/commissioning activities
Accomplished the timely closing of techno-commercial evaluation of
contract, along with ensuring a timely delivery as well as engineering &
technical compliance with contractors
Expertise in developing conceptual design & piping item as per codes and
standards of piping entailing drawings & specification study, vendor
selection & finalization, schedule for development, tool modification and
final approval
Proficiency in reviewing project specific Inspection and Test Plan (ITP),
reviewing procedures and maintaining QC documentation to ensure
adequate documented evidence is available to prove contract compliance
Proven skills at maintaining extensive knowledge of building codes,
specifications and effectively supervising, training & scheduling company
employees with contractors & subcontractors to mediate conflicts
Soft Skills
Education
B.Tech. in Mechanical Engineering from Preston University, Kohat in 2006 with 82%
Associate Engineering (Mechanical) from Govt. College of Technology, Faisalabad in 1996 with 58%
IHSAN UL HAQ
Piping/Mechanical Plumbing & HVAC
(Quality Assurance / Piping Design & Engineering)
Industry Preference: Construction
Location Preference: Gulf
0966566728723, 0966550478486, 0923350179394 butt.ehsan@yahoo.com
Quality Assurance & Control
Piping Engineering
HVAC & Plumbing
Installation & Commissioning
Testing & Inspection
Mechanical Engineering
Project Management
Technical Bid Evaluation
Instrumentation & Designing
Change
Agent
Collaborator
Communicator
Motivator
Planner

2. Certifications
API-570 (Process Piping Inspector) Dammam, KSA, valid up to 2018
API-510 (Pressure Vessel Inspector) Dammam, KSA, valid up to 2018
API-577 (Welding and Metallurgy) Dammam, KSA, valid up to 2018
Certified ASNT Level II as per SNT-TC-1A UT, PT, MT, RT valid up to 2021
(LEED Green Building) Certified Leadership in Energy and Environment Design GBCI, Dammam, KSA, valid up to 2017
ISO 9001:2008 Quality Management System Awareness
IRCA Certified ISO 9001:2015 Quality Management System Training (Result Awaiting)
Training / Certifications
Defensive Driving Training Course
Fall Protection Training Course
Certification of Completion in RFP-007
Certificate of Recognition Safe Work at site
Training of Fall Protection conducted by Saudi Aramco
Training of Confined Space conducted by Saudi Aramco
Safety and Technical Online E. Learning
Work Experience
Since Oct’11 with GIS Bureau VERITAS (Aramco Approved GIS)
NGPIU at Abqaib, KSA RPO-007 with different Project including Community and Oil & gas as HVAC and as Plumbing
Engineer
SAPIU at Jubail, KSA-Wasit Gas Plant NGL Fractionation Unit Package
Inlet and Gas Package as Piping UG/AG and Plumbing Engineer
Currently working at Jizan Economical City Baish in Package as UG and Plumbing Engineer
Roles Handled:
QA/QC Engineer, Piping Engineer, Mechanical Engineer, Plumbing Engineer, HVAC Engineer
Key Result Areas:
Working at PID (Project Inspection Department) QA/QC at Saudi Aramco Projects, organizing kick of meetings
(proposal, engineering & construction phase) and addressing quality requirements for various phases of projects
Providing day-to-day direction for inspection of new facilities in line with engineering & Saudi Aramco standards
Conducting inspection of:
o Pipe spool internal cleaning (air blowing) prior installation
o Pipe laying inspection at pipe rack and sleeper way
o Visual & dimensional inspection on fit-up base, IFC drawing and approving WPS requirements, alignment and plumpness
o Pipe support installation as per IFC drawing
o Valve installation
o Witnessed field valve testing (body test, seat test and back seat test)
o Bolt torqueing and bolt tensioning activities
Undertaking:
o Pretest punch list as per approved isometric drawing and P&ID
o Hydro testing and pneumatic testing
Preparing final punch list in line with reference approved latest revised isometric drawing and P&ID drawings
Developing punch list items during line checking as per project specifications & standards
Checking quality and recommending solutions through designated channels
Analyzing piping test packages prior to pneumatic / hydro testing
Assisting sub-contractor QC Inspector in inspections and review of piping & closing of NCR
Generating inspection reports, worksheets, non-compliance reports, log book entries and onsite inspection findings
Managing:
o Installation & inspection of lift station for oily water, sanitary water and storm water sewer systems
o Calibration of equipment based on the method of statement & vendor's recommendation

3. Creating punch list through MCC walkthrough for plumbing, fire-fighting equipment and components installation
Implementing project, coordinating CP installation & commissioning activities for CDS / CHCD systems
Upgrading existing CP system and performing:
o Interference test with foreign pipelines at crossing locations
o Inspection (RFI) as per the latest approved (ITP)
o Bolt tightening activities to produce necessary documentation
o Inspection for shaft Alignment (1st, 2nd and Hot Alignment) with minimum allowable Tolerance
o Inspection of platforms, handrails, ladders, overhead traveling crane as per approved drawing and standards
Heading pre-commissioning activities of rotating equipment, procedures reviews for water flushing, chemical
cleaning, de-greasing, air blowing, oil flushing, motor solo run, mechanical run and operational tests
Evaluating performance curves for machines, equipment base / base plates adequacy, anchor / foundation design
load calculations, axial forces versus axial deflections, painting specifications, MDR (Manufacturing Data Reports /
Books), spare parts and variety of relevant documents
Dealing with technical bids evaluation, detail and field engineering / modifications / response to site technical
queries, review of data sheets, IOMs, Fat reports, GAD / cross sectional drawings, P&IDs, analysis data, modification
schemes & mechanical seals
Supervising installation & commissioning of:
o Reverse osmosis plant (SO SAFE,AQUA FINA)
o Electric water heater made by super Asia, Zenith, Hayward
o Fire fight pumps (Marsh, Fairbank, and Grandfos)
o Multi stage booster pumps for raw water and drinking water system
o Caterpillar gas engine, heavy duty niigata furnace / diesel oil engine, gas turbine (turbo mach) including waste
heat recovery boiler, boiler feed pumps and inline gear pump
o Galvanized iron pipe (light, medium), carbon steel pipe (sch-40 A-53,A 106) PPRC pipe PN-10, PN-16, PN-20,
UPVC pipe, polyethylene pipe SDR-8, SDR-10, SDR-21 and valves
o Polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) or copper tubing for use as residential and
commercial buildings water pipes
o Swimming pool with equipment and accessories such as chemical dosing pumps, inlets, skimmer, modular
grating, outlets (IML Spain) recirculation pumps and high flow sand filter (Hayward, USA)
o Ducting system, HVAC equipment as per ASHRAE and SMACNA such as chiller (York, Carrier, Brad), AHU, FCU,
Fire and Smoke Damper
Monitoring hydro testing of CPVC, UPVC, PPRC, PP, RTR, FRP piping in accordance with approved drawing
Approvals:
Saudi Aramco Approved Plumbing / Piping Inspection Engineer (SAP #70016391)
Saudi Aramco Approved VID inspector QM-69 (SAP # 70019338)
Accomplishments:
Managed a team of Quality control (10) for Piping material specification including piping thickness calculation and
data sheet of Valve & SM items
Led 25 projects as Piping Lead entailing man-hour estimation, delivery schedules, input analysis, study piping
Previous Experience
Sep’08-Aug’11 with Izhar construction Pvt. Ltd., Carrefour(Hyperstar)at Lahore and Shahbaz airport Jacobabad as
Mechanical & Plumbing (MEP SYSTEMS) Engineer
Mar’02-Aug’08 with Eden Housing Pvt. Ltd., Lahore as HVAC & Public Health Supervisor
Sep’00-Feb’02 with Akbar Associate, Lahore as Plumbing Supervisor
Sep’99-Aug’00 with Eden Developer’s Pvt. Ltd., Lahore as HVAC & Public Health Supervisor
Feb’99-Sep’99 with Akbar Associate, Lahore as Plumbing Supervisor
Jul’97-Feb’99 with Sitara Energy Pvt. Ltd., Faisalabad as Mechanical Maintenance Technician
Jul’96-May’97 with Pakistan Services Ltd., Lahore as Mechanical Plumbing Supervisor
Equipment Purview

4. Insightful knowledge of:
American standards such as ASME, ANSI SMACNA, ASTM, NFPA, NEMA, and OSHA pertaining to infrastructure, Oil
and Gas Engineering
International standard ASME B31.1, ASME B31.3, ASME B31.4, ASME B31.8, ASME Section-VIII, ASME Section-IX
ASME Section-V & API-571
UPC, UMC and IPC
NSF, FM and UL
Hydrostatic pressure testing of underground and ground piping systems
Wells, video logging for water wells, casing repairs, submersible turbines, submersible pumps and faulty casings
Fire sprinkler piping, fuel piping, chill water, hot water piping, AHU, FCU and ducting
Project permanent materials like non-shrink Cementous and Epoxy grout
Laser, hot, reverse & radial-axial ( face & rim ) shaft alignment
Calibrated dumpy level, theodolite, inside and outside micrometer, dial indicator, precision level, vernier caliper,
inclinometer, pyrometer and tachometer
Fiberglass Reinforced Thermosetting Resin, Pipe system from Bond Strand Ltd., Dammam (Wasit Gas Plant, KSA)
Projects Handled:
Organisation: GIS Bureau VERITAS (Aramco Approved GIS)
Client: Saudi Aramco Company
EPC Contractor: CHEC, TR and SEPCO III
Sub-Contractor: MAC, BEMCO, RASAL, DESCON, CBI, SINOPEC
Project: Jizan Economical City Baish Jizan, KSA
Project Title: Sea Water System Package #06 Utility and Common Area Package #05 and Power Block Package #04
Role: Piping (AG/UG) & Plumbing QA/QC Engineer (PID)
Period: Oct’15-Present
EPC Contractor: SK E & C
Sub-Contractor: SINOPEC / CCC / MMG / L&T
Project: WASIT Gas Plant, Al-Jubail, KSA
Project Title: NGL Fractionation Package #04 and Inlet & Gas /Train 100 to 400, MEG Area Package #04
Role: Piping (AG/UG) & Plumbing QA/QC Engineer (PID), Approved Quality Inspector (SAP #70016391)
Period: Oct’11-Sep’15
Client: Eden Developer’s Pvt. Ltd., Lahore
Role: HVAC & Public Health Supervisor
Projects:
Eden Canal Villas
Eden Lane-1
Eden Lane-2
Client: Pakistan Services Ltd., Lahore
Role: Mechanical Plumbing Supervisor
Project: Pearl Continental (PC) Hotel Ext.
Seminars
RTR Bondsrand Training Course from Wasit Gas Plant, KSA in Oct’12
American Society of Mechanical Engineers-Eastern Saudi Arabia Section, Belgicast Soft Seated Valves by Talis from
Le-Meridian Hotel, AL-Khobar, KSA in Mar’13
ASME-Eastern Saudi Arabia Section, Problems Affecting Heat Exchanger Performance and Most Efficient Solutions
from Carlton Al-Moaibed Hotel, Al-Khobar, KSA in Mar’18
Personal Details
Date of Birth: 2nd October 1977
Passport No.: BZ1117331 / Valid Till: Up to 2026
Marital Status: Married / No. of Dependents: 07
Driving License: KSA
Address: Chak No.:248/R.B Nai Abadi BISMILLAH Pur Tehsil & District-Faisalabad