Muhammad Waqas Yaseen is a technical support engineer with over 6 years of experience in asset integrity management, including risk-based inspection analysis. He has experience working with software like VAIL-PLANT and conducting projects for various oil and gas companies. His responsibilities have included identifying inspection points, preparing asset registers, reviewing inspection history, and conducting remaining life assessments. He is familiar with applicable codes and standards.

1. Muhammad Waqas Yaseen
Technical Support Engineer
Address : Electra Street, Abu Dhabi, UAE
Email : raowaqas971@gmai.Com
Contact : +971 56 289 4468 (UAE)
+92 308 637 3984 (PAK)
LinkedIn : https://www.linkedin.com/in/rao-waqas-a44b4368/
SUMMARY
I am a Professional graduate Having UAE Driving License with technical expertise in Risk Based Inspection
methodology. Having 6 years of professional experience in the field of Asset Integrity Management services
including risk based inspection (RBI) analysis, Inspection optimization, Identification of Marking TML/CML
(Written Scheme of Examinations) and dead legs, Remaining Life Assessment, During my professional career
I have successfully executed activities as a part of RBI Projects like Data collection review and sorting
Preparation of RBI Database, Population of data into software template for uploading.
I am well familiar with applicable codes related to asset integrity assessments such as API 580/581, API 571,
API 510/570/653, ASME Section VIII, and ASME B31.3.
I am well versed with application of Microsoft, AutoCAD, PDF Editing using blue beam, Acrobat etc. have also
experience to work with asset integrity software, Like VAIL-PLANT ® (Applus in house built software), Shell
RBI RRM and API RBI Software.
EXPERIENCE
Applus+ Velosi, Abu Dhabi, UAE
Technical Support Engineer Dec 2011 ~ Present
About Applus+ Velosi
Applus+ Velosi is a consultancy group focused in engineering design, vendor inspection, third party
inspection & audit, certification and testing services for the oil & gas, power and construction industry.
PROJECT HANDLED AND RESPONSIBILITIES
Client Name : Adco (ADNOC Onshore)
Project Title : Updating Operating Manuals and Procedures for ADCO
Project Objects:
• 1 year on Site As built of all Piping & Instrumentation Diagram of All Field ,SQM (Shah,Qushawera)
Sahil ,Bab gas and Oil Jabel Dhana ,TPO (MPS,MP21,IPS), North-East Bab
(Dabbiya, Rumaitha and Shanayel)
Asset .Asab,
Responsibilities:
• Walk-through, collection and segregation of all available Piping and Instrumentation drawings.
• Validation and Verification of each and every line on site in Adco (ADNOC ONSHORE) Fields.
• Red Line mark up on changes on site on Piping & Instrumentation Diagram.
• Ensure QA/QC compliance submission with quality and conformance to ADCO “Drawing Office
Practice” and “Numbering Procedure”.
Client Name : OMAN OIL REFINERIES AND PETROLEUM INDUSTRIES COMPANY
(ORPIC), MUSCAT, OMAN
Project Title : Ignition Source Study
Responsibilities:
1

2. • Identified all possible fire / ignition sources; including Instruments, electrical junction boxes, motors,
heaters etc. and their ATEX compliance checked with the area classification drawings for ORPIC,
Mina Al Fahal refinery.
• Audit Static electricity accumulation possibilities and earthing connection healthiness and furnished
status report along with the gaps identified.
Client Name : QATAR FERTILIZER COMPANY (QAFCO) QATAR
Project Title : Consultancy Services in Carrying-Out Fitness for Services and Remaining Life
Assessment of Ammonia 1 & 2 Equipment & Structures
Responsibilities:
• Worked as an assistant inspector on Site for 6 months for all the NDT activities on site
• Population of NDT results in asset register
• Performs miscellaneous job-related duties as assigned. Civil related jobs, Core Testing, Potential
Survey, Depth of Carbonation, Window Break Out, Hammer Test and Dust Sample in QAFCO
Fertilizer Qatar.
Client Name : Oman Oil Company Exploration & Production L.L.C. (OOCEP)
Project Title : Consultancy Services in Carrying-Out Fitness for Services and Remaining Life
Assessment of Ammonia 1 & 2 Equipment & Structures
Responsibilities:
• Worked as an assistant inspector on Site for all the NDT activities on site
• Population of NDT results in asset register
• Performs miscellaneous job-related duties as assigned. Civil related jobs, Core Testing, Potential
Survey, Depth of Carbonation, Window Break Out, Hammer Test and Dust Sample in QAFCO
Fertilizer Qatar.
Client Name : BW-Offshore Singapore
Project Title : VAIL-Plant Software and Provision of RBI Services for BWOffshore Singapore
Responsibilities:
• Identification of Dead legs, small bore Piping, flow induced vibration piping, chemical Injection/mix
points, corrosion under insulation piping, passive fire protection locations and erosion monitoring
locations on P&IDs and Isometric drawings, Risk Ranking and management system.
• Assist Engineer in Preparation of comprehensive inspection plan for piping and static equipment,
which includes types, coverage, locations of NDE techniques marking on inspection isometric &
equipment GA drawings
• Assist Engineer in Semi-quantitative RBI using Velosi RBI which includes,
• Identification of facilities/equipment
• Identification applicable damage mechanisms
• Preparation of Corrosion Loop drawings
• Preparation of Asset Register for Piping and Equipment separately
• Review of Inspection history
• Corrosion rate (ST/LT) and remaining life assessment
• Risk ranking of all identified piping and equipment by determining POF (Probability of failure) and
COF (Consequence of Failure).
Client Name : Talisman Energy Malaysia Limited
Project Title : Provision of Computerized Integrity Engineering Services
Responsibilities:
• Population of data into Template for CREDO.
2

3. • Identification of Dead legs, small bore Piping, flow induced vibration piping, chemical Injection/mix
points, and erosion monitoring locations on P&IDs and Isometric drawings
• Marking of Corrosion Loops on PFDs and P&IDs.
• Marking of Test Points, Deadlegs and Small Bores on TML Drawings.
• Preparation of Asset Register for Pipelines.
• Preparation of asset registers for all identified piping (dead legs, chemical injection/mix points,
CUI/PFP and corrosion/erosion monitoring points) separately.
• Preparation of the spreadsheet for information in CIMS for corrosion circuit drawings,
documentation & inspection drawings (structural inspection drawing, pipeline inspection drawing,
piping isometric, etc.)
• Preparation of hardcopy for all integrity related documents gathered during baseline inspections
and asset register building exercise;
• Preparation of the spreadsheets for updating CIMS with engineering change and replacement data,
asset register change data and planned inspection data for PSVs, Topside Equipment, Piping System,
ESD Valve, Corrosion Coupons/Probes, Flare Tip, and Pedestal Crane, etc.
o .
Client Name : KPOC (Kebabangan Petroleum Operating Company Malaysia)
Project Title : Risk Based Inspection in Meridium for static equipment, piping and PRDs
Responsibilities:
• Identification of Dead legs, small bore Piping, flow induced vibration piping, chemical Injection/mix
points, corrosion under insulation piping, passive fire protection locations and erosion monitoring
locations on P&IDs and Isometric drawings, Risk Ranking and management system.
• Assist Engineer in Preparation of comprehensive inspection plan for piping and static equipment,
which includes types, coverage, locations of NDE techniques marking on inspection isometric &
equipment GA drawings.
• Assist Engineer in Semi-quantitative RBI using Velosi RBI which includes,
• Identification of facilities/equipment
• Identification applicable damage mechanisms
• Preparation of Corrosion Loop drawings
• Preparation of Asset Register for Piping and Equipment separately
• Review of Inspection history
• Corrosion rate (ST/LT) and remaining life assessment
• Risk ranking of all identified piping and equipment by determining POF (Probability of failure) and
COF (Consequence of Failure).
• Electronic marking of dead legs, chemical injection/mix points, CUI/PFP and corrosion/erosion
monitoring points on P&IDs and Isometric drawings.
• Preparation of asset registers for all identified piping (dead legs, chemical injection/mix points,
CUI/PFP and corrosion/erosion monitoring points) separately.
Client Name : Jeddah Refinery Saudi Aramco
Project Title : Conduct RBI Services for Jeddah Refinery
Responsibilities:
The activities include the inspection of the following:
• Review and update corrosion loops and identify the dominant damage mechanisms.
• Developing Inventory Groups from isolation locations.
• Establish the risk levels for equipment and in-plant piping.
• Evaluate the requirements for an increased T&I cycle.
• OSI program review and recommendations for optimization of CML’s as per SAEP-343, SAEP-1135
and SAEP-20.
3

4. • Provide recommendations and propose improvements to manage the risk to acceptable industry
levels; ALARP (As Low as Reasonable Practical) and optimized future inspection and assessment
work scope.
• Increase the safety of the plant by minimizing the risk.
Client Name : Groupement Berkine – Algeria
Project Title : Groupement Berkine -RBI Implementation Provision of Software
Responsibilities:
Liaised with multi‐discipline design team, provided CAD designers with modifications to technical drawings
and work plans according to engineering techniques and procedures
• Velosi RBI of HBNS Pipelines..
• Assist Engineer in Preparation of comprehensive inspection plan for piping and static equipment,
which includes types, coverage, locations of NDE techniques marking on inspection isometric &
equipment GA drawings
• Assist Engineer in Semi-quantitative RBI using Velosi RBI which includes,
• Identification of facilities/equipment
• Identification applicable damage mechanisms
• Preparation of Corrosion Loop drawings
• Preparation of Asset Register for Piping and Equipment separately
• Review of Inspection history
• Corrosion rate (ST/LT) and remaining life assessment
• Risk ranking of all identified piping and equipment by determining POF (Probability of failure) and
COF (Consequence of Failure).
EDUCATION
2010-2012
2007-2010
B-Tech Pass - Electrical Engineering, Newport Institute of Communication and
commerce
DAE- Electrical Engineering, Government college of Technology
PROFESSIONAL COURSES / TRAININGS
Trainings by Applus+ Velosi
• 103:IMS system (10302)
• 106: IT systems summary (10602)
• 204: IT security tips (20402)
• 208: Salt user (208A02)
• 626: ISOS Medical & travel security assistance
• 625: Fire Wardens (62509)
• 107: Anti-Corruption awareness (10701)
CASE STUDIES
• Wrench Time Study
• Ignition Source Study
Shut Downs/Apprenticeship
• Performed Shut Down activities in Pak Arab Fertilizer Limited Multan Pakistan Calcium Ammonium
nitrate (CAN) assembled, install, test, and maintain electrical or electronic wiring, equipment,
appliances, apparatus, and fixtures, using hand tools and power tools.
4