An experienced Engineering Manager with more than 12 years in the Offshore/Onshore renewable Energy, Oil and Gas industry, adhoc vendor inspection, HSE, Pre-shipment Inspection. Also, Abraham has experience as a Third-Party Inspection Subsea Manager, QHSE and QA/QC Inspectors for Onshore & Offshore Projects and has handled, Solar sales Projects, Subsea Inspection Repair Maintenance (IRM) Projects for clients in Norway and abroad. He excels in timely submission of quality reports while ensuring that safety and quality of equipment are in accordance with client’s specifications, using competent hands, up-to-date test equipment, approved test procedures, ensuring correct markings, and that MCCR and MRBs are up to date and correct.
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Abraham Sanni CV
1. PROJECT:
QA/QC INSPECTION ENGINEERING SERVICES
POSITION TITLE:
An Experienced Engineering Manager
REV NO:
A
TENDERER REF:
B-10-201
CLIENT REF:
ENQUIRY NO. 001
PAGE NO:
Page 1 of 4
RESTRICTED
ABRAHAM SANNI
PROFILE
Descriptive summary:
An experienced Engineering Manager with more than 12 years in the Offshore/Onshore Renewable Energy, Oil and Gas industry, adhoc
vendor inspection, HSE, Pre-shipment Inspection. Also, Abraham has experience as a Third-Party Inspection Subsea Manager, QHSE and
QA/QC Inspectors for Onshore & Offshore Projects and has handled, Solar sales Projects, Subsea Inspection Repair Maintenance (IRM)
Projects for clients in Norway and abroad. He excels in timely submission of quality reports while ensuring that safety and quality of
equipment are in accordance with client’s specifications, using competent hands, up-to-date test equipment, approved test procedures,
ensuring correct markings, and that MCCR and MRBs are up to date and correct.
Notable Projects Involved (Inspection / Quality Control / Audit / Installation / Renewable Energy):
Team Leader: Solar Panel sales to Africa on a large scale – Nine difference PACKAGES SOLAR KITS to Africa as the first project base, sales
and installation Solar Penal, Batteries and inverters. TOTAL E & P ANGOLA BLOCK 32 – QA/QC Inspection of KAOMBO FPSO Project in
Norway, TOTAL Plc: TOTAL Eginal Project, EXXON MOBILE – Inspection of MULTIPHASE METERING at ROXAR Stavanger Norway, GE
(Presents) (Jumper Sensor Harness Assemblies – FAT, MCCR & MBR review); TOTAL E&P NORGE (Moho Sensors, Valves – Welding Test
& NDT), ENSCO PLS USA (FAT & Final Inspection of Subsea Control Modules. Metallurgical Welding Forgings - Inspector, Mechanical
Inspector - Pressure Equipment Piping, Rotating Inspector, Electrical Inspector, Instrument and Control Inspector).
AkerSolutionsTM Aker MH AS (MH RN 136 – HYDRAULIC ROUGHNECK MH 1889 – FAT test), ( IFIC I/F Card, iCON SEM DSP CPS CANBUS
IWIS DHPT, etc); TIEC Inspection Company USA (FAT & Final Inspection of Conductor Housing Handling Tools, Casing Hangers, Wellheads,
Corrosion Caps, Drilling Equipment); NATIONAL OILWELL VARCO (F5587 Bridge Racker, F5588 Racking Guide Arm – FAT), (Displacement
Cylinders – FAT), (Pipe Spools – Hydro Test, MPI & RT, Mechanical Properties), (Jumpers Sensor Harness Assemblies; Top TH Sheave,
Workover Umblical - FAT ), (Subsea Cam Manifold Production Bends - FAT); REEF SUBSEA AS (ROV Interface – Pipeline Flashing,
Decommissioning & Commissioning); Etc
Country available to work Australia/United Kingdom/Norway/USA/Germany/Scandinavia/Europe/China/Asia/Africa/UAE/ …. ETC.
Contact email asanni@hgo-dynamicenergy.com / Abrahams.lincoln@live.com
Contact Mobile UK +447397085415
Current Position Engineering Manager
Language Skills English and Norwegian
Master Degree Subsea Engineering
Bachelor Degree Mechanical & Offshore Engineering (Renewable Energy)
DNV-RP-F206 / Cert. RISER INTEGRITY MANAGEMENT / PROJECT ENGINEERING
DC-SMPFM / NDT Subsea Multiphase Metering - NFOGM
EMPLOYMENT HISTORY
10.2015 - Present Engineering Manager – Renewable Energy Projects @ HGO-DYNAMIC ENERGY AS
Work Experience
His Engineering practice covers Engineering Renewable Energy Project, Solar Panel sales, projects and Installation, Subsea Inspection,
Riser & Mooring line inspection, Drilling Equipment, Sensors, HVAC systems, Welding Inspection, ROV, construction vessels and FPSO
moorings, Non Destructive Testing (NDT) Inspection, Dimensional Inspection, Mechanical Tests Inspection, Pipeline Maintenance
Operations, Health & Safety Management with profound knowledge in Engineering Design & Construction; Maintenance & Salvage;
Management and Training; Production Processes; Mechanical Completion; Engineering Project & Risk Management; Commissioning and
Decommissioning.
Recent Project Handle:
RENEWABLE ENERGY IN AFRICA, GERMANY AND NORWAY
Solar Energy Solution Proposal for Homes, Offices and Small & Medium Scale Business
We have prepared a range of kit solar photovoltaic solutions for the global market with no importation restrictions or duties
to Africa market. HGO-DYNAMIC ENERGY’s plans to introduce a selection of photovoltaic kits into the African’s market based
on an analysis of the market. As you may have already noticed, the deterioration of the environment is high correlated to
the production and usage of fossil-based fuels worldwide and most essentially light fluctuation and instabilities in Africa.
2. PROJECT:
QA/QC INSPECTION ENGINEERING SERVICES
POSITION TITLE:
An Experienced Engineering Manager
REV NO:
A
TENDERER REF:
B-10-201
CLIENT REF:
ENQUIRY NO. 001
PAGE NO:
Page 2 of 4
RESTRICTED
Riser / Caisson / Structural Inspection
Special Riser joints, Machining of EDP, LRP, ROV adapted;
Combined systems SLOFEC & PEC & UT;
Fast scanning of the Caissons, Rig Legs; Self crawling etc.
Subsea Inspection Flexible Riser Inspection
UCON, Hubs, Termination heads, External scanning;
Fast scanning of the flexible riser general pipe:
Electromagnetic Eddy Current based Technology: etc.
Umbilicals
QA / QC Inspections
Decommissioning
Engineering and Analysis
Subsea Systems Installation
Installation of pipelines
Risers and Mooring lines
Inspection and Survey
Maritime Safety and Risk.
TOTAL E & P ANGOLA BLOCK 32 – Inspection of KAOMBO FPSO Project
Fire Water Pump Packages for KAOMBO (North and South N/S11UV0110C) Punch list on welding pad for OCU N11UZ0110C
These are some of activities during the project; inspection and review of material certificates, checking out the outstanding punches of
the Firewater pump packages KAOMBO North and South (N/S11UV0110C) with respect to Final inspection/preservation, Dimensional &
Painting DFT Check packing and marking and ensure the Welding pads for OCU N11UZ0110-C that was missing, were added on the units
and punch list closed.
08.2014 – 10.2015 Engineering Manager – QA/QC Inspection @ HGO-DYNAMIC ENERGY AS
Work Experience
Worked on LRP - Lower Riser Package; MCP - Mechanical Complete Package and EDP - Emergency Disconnect Package. To deliver on the
methods, ROV, construction vessels, FPSO moorings and Factory Acceptance Test (FAT) Procedures of the project to guarantee a safe fit-
for-purpose solution that meets project budget and schedule. Including but not limited to:
Attend all pre-bid meetings and coordinate all project requirements with the project bidders: Attend client quality management meetings:
The preparation and control of project quality system management documentation prior to project commencement.
Duties & Responsibilities:
Coordinate Measuring Machine inspection and programing. Romer Articulating arm, preferred, read and interpret engineering
drawings, bill of materials, quality plans, and other documents as needed.
Generating work packs and reviewing inspection reports to ensure compliance to the relevant specifications, ensuring agreed
procedure, standards, and plans are implemented.
Inspect products using gauges, scales, calipers, hardness testing equipment, oscilloscope and visual inspection prior to
shipment. Input information into spreadsheets for data collection.
Undertaking Level 1 Fitness for Service Assessments, Risk Based Inspection Reviews, Riser inspection, dealing with Welding and
QA/QC issues relating to inspection and integrity activities on various assets.
Inspecting the fitting of Subsea & Topside end terminations, factory acceptance and integration testing of completed Umbilical
system, as well as welding defects.
04.2014 – 07.2014 Senior Subsea Lead Engineer / QC Inspector – HGO-DYNAMIC ENERGY
Work Experience
An experience Senior Subsea Lead Engineer / Inspector with Engineering Management for more than seven years major responsibilities
in Oil & Gas and Energy industries: This includes experience of offshore platforms (Topsides, substructures and foundations), shallow and
deep-water projects, subsea installations, pipeline trenching, towed bundles, riser systems, ROV, construction vessels and FPSO moorings.
Providing Method statement, Project Procedures, Task plan and Technical and Operational project support including.
Descriptive summary:
Provide technical support to Project Manager, clients and internal departments regarding the relevant project.
Worked for client as part of the ENSCO plc, Drilling Oil and Gas Wells Company Refinery - PID (Plant Inspection Department), FAT (Factory
Acceptance Test) and Integrity Management Group, provided inspection support for the scheduled for P8109 RIG / PLATFORM. Yearly
Plans also delivered pre-Turnaround work scope, WSE's, Constructability reviews, NDT preparations, Major Inspections, Site Work
Requests, Completions process and Inspection reporting for the FCCU TAR event during 4th Qtr. 2014. Vendor - NATIONAL OILWELL
VARCO (NOV) in Krakow Poland via Kristiansand, Norway. Vendor - AkerSolutionsTM Aker MH AS in Kristiansand Norway.
Offshore Drilling Inspection on MH HYDRAULIC ROUGNECK for ENSCO Offshore Drilling Rig built by AkerSolutionsTM
The MH Hydraulic Roughneck models inspections are to ensure standard functionality of the equipment performance, quality
and reliability.
The equipment inspection also cover thorough check on the designed to spin in/make up and break out/spin out drill pipe and
drill in a pre-defined sequence when equipped with automatic controls.
Ensure the equipment testing is 100% functional as designed FEED (Front End Engineering Design), all necessary documentation
are properly records and the 100% quality expected is achieved before approval for shipment.
3. PROJECT:
QA/QC INSPECTION ENGINEERING SERVICES
POSITION TITLE:
An Experienced Engineering Manager
REV NO:
A
TENDERER REF:
B-10-201
CLIENT REF:
ENQUIRY NO. 001
PAGE NO:
Page 3 of 4
RESTRICTED
Riser and Mooring line Inspection
Task plan with IRM Project work
QHSE Inspections for Offshore Project
Detection of wall loss defects in single
wire and cracks in single wire.
Project procedures.
Task plan.
Subsea Dredging & Excavation
Defect detection like erosion,
corrosion, cracks.
Tendering proposer
Method statement.
Project planning for On/Offshore Operation
Testing flat Flexible Riser layer simulation
for Crack and general wall loss detection.
1.) F5587 Bridge Racker. (FAT test)
The trolley travel - Drive the trolley pinion in both directions. Check signal from the pulse encoder. The Trolley slew - Drive
trolley slew in both directions, CW = Clockwise, CCW = Counter clockwise, Check signal from the pulse-encoder.
The Stand lift cylinder - Drive the standlift cylinder with vertical trolley in both directions. Check signal from the length
transmitter. Check signal from load cell.
The Gripper Head 3 ½” – 13 5/8” - (FAT gripper head reviewed) Open and close the roller and gripper function. Check for proper
engagement disengagement to vertical trolley. Check the hanger bracket device, tilt function.
2.) F5588 Racking Guide Arm. (FAT test)
The Telescope slew 0 – 190 - (CW = Clock Wise, CCW = Counter Clock Wise) Slew the telescope 0°-95° CW. Start point 0° is
looking towards well centre. Slew the telescope 0°-95° CCW. Start point 0° looking towards well centre.
The Telescope tilt function - Extend the cylinder from the inner position to its outer position. Retract the cylinder to its inner
position. The Trolley travel - Drive the trolley in both directions.
The Gripper head tilt function - Extend the cylinder from the inner position to its outer position. Retract the cylinder to its inner
position. Check the slave function. ETC
To deliver on the methods and Factory Acceptance Test (FAT) Procedures of the project in order to guarantee a safe fit- for-
purpose solution that meets project budget and schedule. Including but not limited to:
Tendering proposer - Hydraulic Roughneck - Method statement - Project procedures.
Responsibilities:
De-commissioning (de-oiling and de-gassing); Rigid spools testing; Flowline and pipeline Cleaning, Gauging, Hydrotesting, High
velocity flushing, Dewatering, Drying, Nitrogen purging, Gelling; Static and dynamic Umbilical monitoring and testing.
Commissioning and preservation; Pressurization for rock dumping; Pigs design, trial testing and selection; Multidimeter
pipelines pigging i.e. wheel pigs development; Welding pigs design; Radioactive pig tracking; Flexibles riser filling, testing,
commissioning and de-commissioning.
Pipeline intelligent inspection: Calliper, MFL and UT survey; Back seal testing of flanged connections and riser hang off; Chemical
treatment and chemicals selection; Subsea structures preservation (Manifolds, PLEM, PLET); ROV tolling for valve operations.
Hot stabs; Bolt Tensioning; Testing & Commissioning philosophy development; Preparation of tenders including preparation of
method statements, equipment lists and pricing; HAZOP, HIRA and Design review assessments; MDR and planning support
(scheduling).
Oversee the Work package Mechanical Completions (MC) inspectors. Plan for, acquire and supply team with necessary
resources as needed, creating and build cohesive teamwork.
Work closely with work package MC Coordinators and Inspectors as well as the Project QS Coordinator and the project,
represented by Work Package Managers in all disciplines.
Responsible for coordination of MC at Subsea project sites, follow Project Engineer Manager (PEM) for project management
and execution.
Ensure that MCCRs (both in-house and external) are linked to relevant materials in SAP and that project MCCR requirements
are reflected in the SDRLs. Ensure that WP MC Coordinators register and maintain the MC scope.
EMPLOYMENT HISTORY cont.
09.2013 – 03.2014 Subsea Project Engineer /Dimensional Control Inspector – REEF Subsea Integrated Project.
Descriptive summary:
To deliver on the methods and procedures of the project in order to guarantee a safe fit-for-purpose solution that meets
project budget and schedule. Including but not limited to:
Review of subcontractor tenders:
Follow up of temporary pigging/testing heads (PLR) design and fabrication; Site visits and reporting; Management of change; Vessel
management; Risk management; Leadership; Mentoring. Provide technical support to Project Manager, clients and internal departments
regarding the relevant project. To interact with client in official project meetings to establish a working relationship and to have an in-
depth understanding of work at hand. To assist in formulating a project plan to identify areas requiring engineering inputs to make clear
list of project engineering deliverables.
4. PROJECT:
QA/QC INSPECTION ENGINEERING SERVICES
POSITION TITLE:
An Experienced Engineering Manager
REV NO:
A
TENDERER REF:
B-10-201
CLIENT REF:
ENQUIRY NO. 001
PAGE NO:
Page 4 of 4
RESTRICTED
2011 - 2012 / A year
and two months
Project Group Leader - Subsea projects / University of Strathclyde:
Descriptive summary:
Lead a team of five in a group project on the development of the Oil & Gas Field in Asia Pacific and Australia, being responsible for the
development, management and design of ROV/SRV in my Department at the University of Strathclyde and supervision of equipment
operations. Working as a Group Project leader to provide and ensure successful execution of the projects through proper management,
planning, scheduling and the optimum deployment of resources and personals.
My Duties and roles
Ensures that all projects conform to the international and local standards in quality control of design and preparation of
documentation ISO 9001 and ISO 3901.
Worked collaboratively with the Senior Supervisor teams (Project management Lecturer, Operation, Health Environment &
Safety and Business) to prepare Business Plans, Budgets, Appropriation Requests and Project Execution Plans using Que$tor &
MS Project software application.
Responsible for ensuring that all operational and maintenance issues are covered using Inspection and Survey skills.
Technical development of planned maintenance programmes in conjunction with Maintenance Planner
Works with technical Project Coordinator to ensure the right procedures are followed and preparing meeting, agendas, taking
minutes of meeting using my Project Planning and Reporting skill.
2003 – 2008 / five
years two months
Project Field Engineer - QA/QC Supervisor - Moriola Oil & Gas (Nig) Ent. Limited, Abuja
Descriptive summary:
Inspection of Plant, Hydraulic Systems, Equipment and Mechanical Installations: Carried out regular inspection and repairs of
port plant, machinery, safety equipment, navigation lights, and all mechanical installations.
Worked as an onsite leader to ensure that each project conforms to Moriola's standards for both quality and safety. Worked
collaboratively with the multi-functional teams (Project management, Operation, Health Environment & Safety and Business)
to prepare Business Plans, Budgets, Appropriation Requests, and Project Execution Plans.
Achievement: Fully involved in Nigeria National Petroleum Corporation (NNPC) contract awards on installation, Repairs and Networking
for NNPC tower that yielded the company Moriola a very huge profit.
EDUCATION
2011 - 2012
Subsea Engineering (Postgraduate’s Degree)
University of Strathclyde, Glasgow, Scotland, UK
2010 - 2011
Advance Project Management (APM) for Engineers - IOSH Working Safely
University of Oxford, UK
2008 - 2010
Mechanical & Offshore Engineering (Bachelor’s Degree)
The Robert Gordon University, Aberdeen, Scotland, UK
2006 - 2008
Working to raise money for my Higher Institution
Project Field Engineer - QA/QC Supervisor
2003 - 2006
Automobile Mechanics: Diploma (Distinction)
Moriola Automobile Engineering Training Institute, Abuja Nigeria.
COURSES ATTENDED
BOSIET
Sept. 2013 – To Date Offshore Survival Training
Sept. 2013 – To Date Offshore Medical Certificate
SUBSEA PROFESSIONAL DEVELOPMENT
Nov. 2011 – To Date Subsea Technology for the Development of Offshore Oil and Gas Field.
Nov. 2011 – To Date Validation Tests of Panel Buckling Strength of Steel Panels