1. SYED.MUKTHAR AHAMED
Senior HVAC & Plubing Engineer & QC Inspector.
Mobile: 00966 581808202.
To work professionally and contribute long years of knowledge and experience in the field of
Senior: HVAC & Plumbing Engineer & QC Inspector.
{ QC Inspector & Site Execution & Designing & Fabrication’s & Maintenance }
PROFESSIONAL SNAPSHOT
KNOWLEDGE FORTE
Job Responsibilities - As a QC Inspector & Engineer
1. Mainly worked as a Plumbing QC Inspector in three Plumbing system.Drainage & Storm water system,
water Supply system and Firefighting.
A seasoned professional with over 15 years of rich cross cultural experience in the areas of
HVAC & Plumbing QC & Engineering.
Possess good knowledge of HVAC & Plumbing from Building’s & Plant’s Service, Professional
Designing, Site Implements, QC Inspections & Calculation’s, Drawing Skills.
Professional Position,
1) Senior HVAC Design Engineer. 2) Senior Mechanical Site Eng. 3) HVAC QC Inspector.
4) Plumbing QC Inspector.
Recently working from July 2015 with Sino Hydro Corporation – Contract NO PIC H-7802A &
PIC E-7805
(Construction of Yanbu Industrial College Expansion & Construction of Educational Buildings)
As a Senior Mechanical Engineer.
Well versed with AutoCAD Version R14, Auto CAD 2000 To 2014, Win95, Win98, Win 2000,Win ME,
Win XP, Win 7,Win8, Windows, MS Office and Internet Applications.
Ability to manage and complete projects to the highest standards meticulously and within specified
deadlines of the work.
Ability to manage As a Professional, Plumbing & HVAC QC Inspector & Engineer. projects to the
highest standards
2. 2. Having know about QC system.
A) Well knowledge about Schedule Q. B) well knowledge about ITP. C) well knowledge about R.F.I & N.C.R
D) Well knowledge about Inspections levels for Materials & site Construction work.
E) Well knowledge about IPC & UPC. F) well knowledge about SAES, SAITP, SAIC, SAITR, Etc………
G) Well knowledge about SMACNA & ASHRES standard.
3. Management of sub-contractors, foremen and assistance in the placement of Sub-contract and material
orders.
4. Collaborate with Engineering Manager, Quality Control manager on the design & manufacturing of new
products & existing products.
5. Preparation of RFI (Request for Inspection), and material inspection as per B.O.Q and specifications. and
Submission of shop drawings
6. Preparing Project Engineering schedules and forecasts.
7. Coordination and checking of engineering deliverables.
8. Preparing weekly and monthly progress report.
9. Coordination with client, consultant, suppliers and sub-contractors.
10. Accountable for successful completion of engineering projects.
11. Participating in client/ contractor meetings and resolving client/ engineering and management project
issues.
12. Coordinate production with regards to quality and work man ship.
13. Conducting monthly audit activities.
14. Prepare detailed checklist for the jobs as per specification/ material approval/ drawings.
15. Carryout vendor site inspection.
16. Review the detailed design documents before going to fabrication/ Construction activity.
17. Reporting to the project Manager and Consultant.
18. Attend every weekly meeting, Minutes of meeting, and Etc.
19. Preparing invoice as per site progress.
3. Job Responsibilities As a Design Engineer:
Possess good knowledge of:
o HVAC Designing Professional with SMACNA& ASHRAE standard..
o HVAC Equipment Selection.
o DUCT Professional Calculation &Grill’s Designing with standards.
o Duct, Grills and Equipment Execution on Site.
o HVAC & Plumbing QC Inspection’s.
o HVAC & Plumbing Professionally Maintenance
o Designing & Site Execution Water Supply System.
o Designing & Site Execution Drainage System.
o Inter-Departmental Co-ordination (Electrical, Structural and Architectural).
o Efficient Management.
o Good Interpersonal Skills.
Well versed with Designing Skills:
o Extensive knowledge of Design Principles related to HVAC and Plumbing
o Ability to provide creative and practical design solutions to meet the customer
specifications.
o Heat Load calculations following ASHRAE codes using software viz. Carrier HAP
and Elite.
o Extensive knowledge of various designing activities related to HVAC systems such
as Chilled Water Systems, DX systems, VRF systems etc.
o Calculation of chilled water pipe diameter according to ASHRAE codes and
designing the layout of chilled water supply and return pipes and selection of
various accessories.
o Selection of Chilled water FCUs and AHUs according to specifications and site
conditions.
o Pump head calculation and selection of Chilled water pumps.
o well versed with the selection of DX split units, DX Packaged units and DX AHUs.
o Designing of VRF systems and selection of VRF outdoor and indoor units.
o Duct System design using Equal Friction Method following SMACNA standards.
o Designing of Plumbing networks for commercial, residential buildings including
supply and drainage.
o Preparation and reviewing of Shop Drawings and Material Submittal.
o well versed with BOQs, equipment schedules and specifications.
o Preparing Quotations and presenting them in a clear and simple manner.
o Knowledge of Major Manufacturers in the field and the product brand they possess.
4. o Exceptional ability to perform with Consistency in a varied environment and under
pressure.
o Excellent organizational and communication skills and interpersonal tactics.
Possess excellent knowledge of Calculations Skills:
o Heat Loud Calculation (Carrier HAP and Elite).
o Exhaust Calculation.
o Sealing Diffuser & Grill Selections. With noise create area.
o Fresh Air Calculation.
o Duct Calculation. (Equal Friction).
o Duct heater Calculation.
o Chill water Presser Drops& pipe sizing Calculation.
o Pumps &Motor selections.
o HVAC System selections.
Plumbing Skills:
o Septic tank & Sock away Calculation.
o Drainage Equipment & Materials selections.
o Drainage & rain water pipe size and fitting’s selections.
o Water supply System pipe Designing
o Water Supply System Pumps &Motor selections.
o Under Ground & Overhead water tank Selections.
Drawing Skills:
o Comfortable with Architectural drawings
o HVAC & Plumbing Designing and Shop drawings.
o HVAC Fabrication. Plenum Box, Ducts & Fittings as per Ducts Drawings.
o Preparing As Built Drawings
o Specialization in 2D.
5. EXPERIENCE FORTE
Handling a Team- (Al Otaishan Engineering – Riyadh k.s.a - 2000 To 2002 ) :
o General 50 Bed Hospital (Ministry Of Health) –(Dhulam ) as a Design Engineer.
o General 50 Bed Hospital (Ministry Of Health) –(Thuraban ) as a site Engineer.
o General 50 Bed Hospital (Ministry Of Health) –Najran (Thar) as a site Eng. with
Maintenance
o General 50 Bed Hospital (Ministry Of Health) –Najran (Yadama) as a Design Engineer.
o King Fahd Armed Force Hospital –Jeddah (Ministry Of Defense and Aviation) as a site
Eng. with Maintenance
Handling a Team- ( SAUDI OGER CO LTD – Riyadh k.s.a - Feb’2003 To Dec’2006) :
o South Abhor Palace. Buildings.54E, 75,92, 97, 99, 99a, 103, 106, 745a (JEDDHA) as a site &
Maintenance Engineer
o Villa Naeem-Private Residence Project in Naeem Quarter. (JEDDHA) as a Design Engineer
o Yamama Palace. Buildings. 21, 22, 37, 38a, 38b, 40a,40b, 41c (RIYADH) as a site &
Maintenance Engineer
o Alpha Royal Diwan (RIYADH) as a site & Maintenance Engineer
o King Khalid Diwan (RIYADH) as a Design Engineer
o KAMC Royal Clinic (RIYADH) as a Design Engineer
o Banban Health Club (RIYADH) as a Design Engineer
o King Abdullah TENT (RIYADH) as a Design Engineer
o V.R.B.H TENT (RIYADH) as a Design Engineer
o L.H.P.R Hotel – King Abdul-Aziz International Conference center (RIYADH) as a site
Engineer
o United Tower Hi rise Building 37 story (JEDDHA) as a site Engineer.
Handling a Team- ( S.R Engineering con co – Jubail k.s.a - 2010 To Apr’ 2013 ) :
o SIPCHEM (JUBAIL) as a HVAC QC Inspector.
o ABVP Rock Company(YARSREF Refinery ARAMCO– YAMBO) as a HVAC QC Inspector.
ФHandling a Team- : Applus Velosi - IMCO-Engineering & Construction
( EPI SCADA substation - Dukhan – Doha - Qatar )
o As a HVAC site Engineer (04/04’2014 to 02/05/2015)
o
6. ACADEMIC
2007 To 2009 : B.E. Mechanical–Lateral Entry From { Himes Institute of Management And Engineering Studies }
Reg. Under Societies Act by GOVT of Telangana - INDIA
1997 To 1999 : Higher Diploma in Mechanical Engineering (3years) from Govt. Polytechnic College
Anantapur, Andhra Pradesh - INDIA
1999 : Diploma in HVAC Designing from JACIR Impermatic. Kadapa, Andhra Pradesh - INDIA
2000 : Diploma in AutoCAD from Gayatri Institute of Hardware Technology, Hyderabad, Andhra Pradesh
IT CREDENTIALS
Possess good knowledge of AutoCAD Version R14, AutoCAD 2000 to 2013, Win95, Win98, Win 2000 , Win Me,
Win XP, Win 7, Win 8, Windows, MS Office and Internet Applications.
PERSONAL DOSSIER
Date of Birth: 04/07/1971
Languages Known: English, Hindi, Arabic, Urdu and Telugu
Address: Kadapa, Andhra Pradesh (India)
Mobile : 0091 9505656504. ( INDIA)
00966 581808202 ( K.S.A)