133467 p3a1
•Download as DOCX, PDF•
0 likes•6 views
The document compares the accuracy of forward, backward, and central difference methods for approximating the derivative of a function. It provides the exact derivative, calculates the approximate derivatives using h=0.1, and determines the error compared to the exact value. The central difference method provides the most accurate approximation, with an error of 0.003, while the forward and backward differences have errors of 0.015 and 0.009 respectively.
Report
Share
Report
Share
Recommended
Basic Integral
The document discusses integrals and their use in calculating areas and volumes. It defines an integral as combining infinitesimal data to determine displacement, area, volume, and other concepts. The document provides an example of calculating the indefinite integral of the function f(x)=x as 1/2x^2 + C and the definite integral from 0 to 3 of f(x)=x as 4.5 by using the integral formula and verification with the area of a rectangle formula.
Alg2 lesson 7-6
The Rational Number Theorem states that if a polynomial function has integer coefficients, any rational zero must be of the form p/q, where p is a factor of the constant term and q is a factor of the leading coefficient. This document provides examples of finding the possible rational zeros of polynomial functions by listing the factors of the constant and leading coefficients. It determines the actual zeros of the function 2x^3 + 3x^2 - 8x + 3 to be 1, 1/2, and -3.
Polynomial And Rational Funciotns 0921
The document discusses graphing and analyzing various polynomial and rational functions. It provides instructions to graph functions such as f(x) = x5 - x, find turning points of functions like f(x) = x3 - 2x2 - 3x + 7 in the first quadrant, and state vertical asymptotes and turning points for functions including f(x) = x2 - 8x - 20. It also lists review questions 1, 3, 5, 6, 11, and 19 from Exercise 1.8.
6.4 Graphing Polynomials (Relative Max/Min, Zeros)
This document provides information on key concepts for graphing polynomial functions such as relative maximums and minimums, finding zeros of a function, and making tables of values to graph functions. It includes examples of making tables and graphs for the functions f(x) = -x3 - 4x2 + 5 and f(x) = x4 – x3 - 4x2 + 1. For the latter function, the document identifies that the zeros occur between -2 and -1, -1 and 0, and 0 and 1. It also shows working through an example to find the relative maximum and minimum values for the function f(x) = x3 – 4x2 + 5, identifying the relative max near x
Tur 3
This document discusses taking the first derivative of the function f(x) = (2x - 3)^3. The first derivative, or slope, of this cubic function can be found by using the power rule and chain rule for derivatives. The derivative is f'(x) = 6(2x - 3)^2 * 2.
Alg2 lesson 7-6
The rational number theorem states that if a polynomial function has integer coefficients, any rational zero must be of the form p/q, where p is a factor of the constant term and q is a factor of the leading coefficient. The document provides examples of finding all possible rational zeros of polynomial functions by listing the factors of the constant and leading coefficients. It demonstrates finding the actual zeros of a function by factoring the polynomial and setting each factor equal to zero.
Properties Of Exponents
The document summarizes several key properties of exponents:
1) The Product Property states that when multiplying like bases, you add the exponents.
2) The Quotient of Powers Property allows you to divide one power by another by subtracting the exponents.
3) The Power of a Power Property allows you to raise a power to another exponent by multiplying the exponents.
Parent Functions
This document defines and provides examples of common mathematical functions including constant, linear, absolute value, quadratic, cubic, square root, inverse, inverse squared, exponential, logarithmic, sine, and cosine functions. It also mentions signum and step functions.
Recommended
Basic Integral
The document discusses integrals and their use in calculating areas and volumes. It defines an integral as combining infinitesimal data to determine displacement, area, volume, and other concepts. The document provides an example of calculating the indefinite integral of the function f(x)=x as 1/2x^2 + C and the definite integral from 0 to 3 of f(x)=x as 4.5 by using the integral formula and verification with the area of a rectangle formula.
Alg2 lesson 7-6
The Rational Number Theorem states that if a polynomial function has integer coefficients, any rational zero must be of the form p/q, where p is a factor of the constant term and q is a factor of the leading coefficient. This document provides examples of finding the possible rational zeros of polynomial functions by listing the factors of the constant and leading coefficients. It determines the actual zeros of the function 2x^3 + 3x^2 - 8x + 3 to be 1, 1/2, and -3.
Polynomial And Rational Funciotns 0921
The document discusses graphing and analyzing various polynomial and rational functions. It provides instructions to graph functions such as f(x) = x5 - x, find turning points of functions like f(x) = x3 - 2x2 - 3x + 7 in the first quadrant, and state vertical asymptotes and turning points for functions including f(x) = x2 - 8x - 20. It also lists review questions 1, 3, 5, 6, 11, and 19 from Exercise 1.8.
6.4 Graphing Polynomials (Relative Max/Min, Zeros)
This document provides information on key concepts for graphing polynomial functions such as relative maximums and minimums, finding zeros of a function, and making tables of values to graph functions. It includes examples of making tables and graphs for the functions f(x) = -x3 - 4x2 + 5 and f(x) = x4 – x3 - 4x2 + 1. For the latter function, the document identifies that the zeros occur between -2 and -1, -1 and 0, and 0 and 1. It also shows working through an example to find the relative maximum and minimum values for the function f(x) = x3 – 4x2 + 5, identifying the relative max near x
Tur 3
This document discusses taking the first derivative of the function f(x) = (2x - 3)^3. The first derivative, or slope, of this cubic function can be found by using the power rule and chain rule for derivatives. The derivative is f'(x) = 6(2x - 3)^2 * 2.
Alg2 lesson 7-6
The rational number theorem states that if a polynomial function has integer coefficients, any rational zero must be of the form p/q, where p is a factor of the constant term and q is a factor of the leading coefficient. The document provides examples of finding all possible rational zeros of polynomial functions by listing the factors of the constant and leading coefficients. It demonstrates finding the actual zeros of a function by factoring the polynomial and setting each factor equal to zero.
Properties Of Exponents
The document summarizes several key properties of exponents:
1) The Product Property states that when multiplying like bases, you add the exponents.
2) The Quotient of Powers Property allows you to divide one power by another by subtracting the exponents.
3) The Power of a Power Property allows you to raise a power to another exponent by multiplying the exponents.
Parent Functions
This document defines and provides examples of common mathematical functions including constant, linear, absolute value, quadratic, cubic, square root, inverse, inverse squared, exponential, logarithmic, sine, and cosine functions. It also mentions signum and step functions.
Algebra 1 Item No 59
The document explains how to find the intersection point of two lines by using the elimination method. It shows working through an example problem where the lines x - y = 1 and 2x - y = 5 intersect. By subtracting the equations to eliminate y, it is found that x = 4. Plugging this back into one of the original equations gives y = 3, so the intersection point is (4, 3), which is the answer.
1 13s-f
This document contains the instructions for a Calculus I final exam consisting of two parts. Part I has 10 multiple choice questions worth 5 points each involving derivatives, anti-derivatives, limits, and finding absolute maxima and minima. Part II has 6 longer form problems worth between 1-10 points each involving implicit differentiation, linearization, graphing functions, finding absolute extrema, and a word problem about the speed of a shadow. Students are instructed to show their work and simplify answers where possible to earn full credit.
Alegebra Powers Substitution
The document provides examples and step-by-step workings for evaluating algebraic expressions by substituting number values for variables. It demonstrates evaluating expressions including powers, integers, fractions, and evaluating expressions to find volumes. The examples show applying order of operations and substitution to simplify expressions down to a single numerical value.
Extramath g11 chp1
This document contains 4 exercises involving quadratic equations with real parameters:
1) The first exercise involves solving a quadratic equation and relating its roots to the roots of another quadratic equation.
2) The second exercise explores properties of the roots of a quadratic equation involving a parameter m, including expressing various expressions in terms of m.
3) The third exercise involves finding unique and distinct real solutions of a quadratic involving m, and expressing various expressions in terms of m.
4) The fourth exercise explores the discriminant of a quadratic involving m, and finds values of m that satisfy certain properties related to the roots.
February 13, 2015
1. The document outlines the day's math lesson which includes reviewing systems of equations solutions, solving 3x3 systems, and completing yesterday's class work.
2. It provides examples and steps for solving systems of equations by graphing, elimination, and substitution. Equations are presented in standard form and slope-intercept form.
3. Solving 3x3 systems is discussed, noting they cannot be graphed since they exist in three dimensions. The substitution method is demonstrated through an example.
3.4 Polynomial Functions and Their Graphs
Identify and interpret horizontal and vertical translations
Identify the end behavior of a function
Locate and/or approximate zeros of a function
Calculus ch#1 (4)
#CivilEngineering
#Calculus
#Chapter #1
#Exercise 1-6
@Fully Solved Question
#Related theory
Further I am upload the remainning chapter step by step.
Linear regression using least squares
This document discusses linear regression using the least squares method. It shows how to find the regression line that best fits a set of data by minimizing the sum of the squared errors between the actual y-values and the predicted y-values. The key steps are: 1) computing the Pearson correlation coefficient to assess the strength of correlation, 2) deriving the regression equation in the form y=mx+b, 3) using the equation to predict y-values and calculate errors, and 4) computing the sum of squared errors to determine the best-fitting regression line. An example is provided with data points and calculations to demonstrate the process.
Post_Number Systems_4
This document discusses number systems, specifically exploring the Fibonacci definition of the number one. It establishes that for natural numbers n, the Fibonacci definition of one should correlate to the Bernoulli base of natural logarithms. It then provides examples of applying the Fibonacci definition of one for the case where the Fibonacci number F(n) is equal to 3, calculating values for integers like 13 and 33 as well as real numbers like 6.6260700E-34. A future post is intended to provide more examples to clarify the nomenclature.
Graphing polynomial functions (Grade 10)
This document provides instructions on graphing polynomial functions. It discusses identifying the roots, x-intercepts, and y-intercept from the factored form of the polynomial. It shows working through an example of graphing the function y = (x – 2)(x – 1)(x + 3). The key steps are:
1. Identify the roots and y-intercept
2. Arrange the roots in a table
3. Complete the table by calculating y-values for different x-values
4. Plot the points on a graph
5. Sketch the graph
exam1 112
This document provides information about an exam for an electrical engineering course on probabilistic methods. It includes:
- Details about the exam such as date, time, location, and instructions.
- Four problems related to probability concepts like switching networks, conditional probability, network connectivity, and Gaussian random variables.
- Tables for timing and instructors of exam sections.
The document gives students the information needed to take a closed-book exam on probabilistic methods in electrical engineering. It provides four practice problems addressing key course concepts along with instructions for the exam.
Calc02 3 n
This document discusses continuity of functions and discontinuities. It defines a continuous function as one where the limit matches the value of the function at a point. There are two types of discontinuities: essential discontinuities which cannot be removed and removable discontinuities which can be removed by defining the function at the point of discontinuity. The intermediate value theorem states that if a function is continuous on an interval, it must take on all values between the function values at the endpoints.
07 chap3
This document introduces matrices through the theory of simultaneous linear equations. It discusses how matrices can represent systems of linear equations and how elementary row operations can be used to solve such systems. Specifically, it shows that elementary row operations preserve equivalence between systems of linear equations. It then provides examples of using row operations to determine that a system has no solution and to solve a system with an infinite number of solutions.
Secant Method
The secant method is a root-finding algorithm that uses successive secant lines to converge on a root of an equation. It begins with two initial points and finds where the secant line between those points intersects the x-axis. It then uses the intersection point as the next estimate and draws a new secant line. This process repeats until the estimate converges within a specified tolerance of the root. The secant method requires only function evaluations, unlike other methods that also require derivative evaluations. However, it may not always converge and provides no error bounds for the estimates.
False Point Method / Regula falsi method
This lecture contains False Point Method working rule, Graphical representation, Example, Pros and cons of this method and a Matlab Code.
The Whole Numbers
The document discusses whole numbers and their properties. It defines the set of whole numbers Z as including both natural and negative numbers. It discusses the signs, absolute values, and opposites of whole numbers. It also covers the rules for addition, subtraction, multiplication, and division of whole numbers, as well as the order of operations. There are examples provided for each concept. The document ends with activities involving using whole numbers to describe real-world situations and lists online resources for further information.
Application of Derivative 5
JEE Mathematics/ Lakshmikanta Satapathy/ Application of Derivative QA part 5/ Question on Absolute maximum and Minimum values of a function in a closed interval solved with the related concepts
Quadratic functions
This document describes how to transform quadratic functions from general form to standard form in three steps:
1) Factor out the leading coefficient a from the first two terms.
2) Complete the square of the factored quadratic expression.
3) Factor the completed square and combine like terms.
Examples of transforming specific quadratic functions like f(x) = x^2 - 8x + 3 and f(x) = 2x^2 + 5x - 1 are provided. An activity with 5 quadratic functions to transform to standard form is listed at the end.
6.1 system of linear equations and matrices t
This document contains examples of solving systems of linear equations using different methods:
1) A 3x3 system is reduced to a 2x2 system by elimination of one variable.
2) A 2x2 system is solved using matrix notation by putting the system into a matrix and reducing it to reduced row echelon form.
3) Two word problems are set up as systems of linear equations with variables representing costs and numbers of items, and the systems are solved.
2. Fixed Point Iteration.pptx
This document discusses the fixed point iteration method for solving nonlinear equations numerically. It begins with an overview of the method, explaining that it involves rewriting equations in the form x=g(x) and then iteratively calculating xn+1=g(xn) until convergence. The document then provides an example of using the method to solve the equation x3+x2-1=0. It shows rewriting the equation, choosing an initial guess, iteratively calculating the next value of x, and checking for convergence. The document concludes by explaining how to implement the fixed point iteration method numerically using loops in code.
maths ppt.pdf
The document discusses Fourier series and periodic functions. It provides:
- Definitions of Fourier series and periodic functions.
- Examples of periodic functions including trigonometric and other functions.
- Integration properties used to solve Fourier series problems.
- Two examples showing the steps to obtain the Fourier series of given periodic functions in a specified interval.
maths ppt.pdf
The document discusses Fourier series and periodic functions. It provides:
- Definitions of Fourier series and periodic functions.
- Examples of periodic functions including trigonometric and other functions.
- Euler's formulae for calculating the coefficients of a Fourier series.
- Integration properties used to solve Fourier series problems.
- Two examples of determining the Fourier series for given periodic functions and using it to deduce mathematical results.
More Related Content
What's hot
Algebra 1 Item No 59
The document explains how to find the intersection point of two lines by using the elimination method. It shows working through an example problem where the lines x - y = 1 and 2x - y = 5 intersect. By subtracting the equations to eliminate y, it is found that x = 4. Plugging this back into one of the original equations gives y = 3, so the intersection point is (4, 3), which is the answer.
1 13s-f
This document contains the instructions for a Calculus I final exam consisting of two parts. Part I has 10 multiple choice questions worth 5 points each involving derivatives, anti-derivatives, limits, and finding absolute maxima and minima. Part II has 6 longer form problems worth between 1-10 points each involving implicit differentiation, linearization, graphing functions, finding absolute extrema, and a word problem about the speed of a shadow. Students are instructed to show their work and simplify answers where possible to earn full credit.
Alegebra Powers Substitution
The document provides examples and step-by-step workings for evaluating algebraic expressions by substituting number values for variables. It demonstrates evaluating expressions including powers, integers, fractions, and evaluating expressions to find volumes. The examples show applying order of operations and substitution to simplify expressions down to a single numerical value.
Extramath g11 chp1
This document contains 4 exercises involving quadratic equations with real parameters:
1) The first exercise involves solving a quadratic equation and relating its roots to the roots of another quadratic equation.
2) The second exercise explores properties of the roots of a quadratic equation involving a parameter m, including expressing various expressions in terms of m.
3) The third exercise involves finding unique and distinct real solutions of a quadratic involving m, and expressing various expressions in terms of m.
4) The fourth exercise explores the discriminant of a quadratic involving m, and finds values of m that satisfy certain properties related to the roots.
February 13, 2015
1. The document outlines the day's math lesson which includes reviewing systems of equations solutions, solving 3x3 systems, and completing yesterday's class work.
2. It provides examples and steps for solving systems of equations by graphing, elimination, and substitution. Equations are presented in standard form and slope-intercept form.
3. Solving 3x3 systems is discussed, noting they cannot be graphed since they exist in three dimensions. The substitution method is demonstrated through an example.
3.4 Polynomial Functions and Their Graphs
Identify and interpret horizontal and vertical translations
Identify the end behavior of a function
Locate and/or approximate zeros of a function
Calculus ch#1 (4)
#CivilEngineering
#Calculus
#Chapter #1
#Exercise 1-6
@Fully Solved Question
#Related theory
Further I am upload the remainning chapter step by step.
Linear regression using least squares
This document discusses linear regression using the least squares method. It shows how to find the regression line that best fits a set of data by minimizing the sum of the squared errors between the actual y-values and the predicted y-values. The key steps are: 1) computing the Pearson correlation coefficient to assess the strength of correlation, 2) deriving the regression equation in the form y=mx+b, 3) using the equation to predict y-values and calculate errors, and 4) computing the sum of squared errors to determine the best-fitting regression line. An example is provided with data points and calculations to demonstrate the process.
Post_Number Systems_4
This document discusses number systems, specifically exploring the Fibonacci definition of the number one. It establishes that for natural numbers n, the Fibonacci definition of one should correlate to the Bernoulli base of natural logarithms. It then provides examples of applying the Fibonacci definition of one for the case where the Fibonacci number F(n) is equal to 3, calculating values for integers like 13 and 33 as well as real numbers like 6.6260700E-34. A future post is intended to provide more examples to clarify the nomenclature.
Graphing polynomial functions (Grade 10)
This document provides instructions on graphing polynomial functions. It discusses identifying the roots, x-intercepts, and y-intercept from the factored form of the polynomial. It shows working through an example of graphing the function y = (x – 2)(x – 1)(x + 3). The key steps are:
1. Identify the roots and y-intercept
2. Arrange the roots in a table
3. Complete the table by calculating y-values for different x-values
4. Plot the points on a graph
5. Sketch the graph
exam1 112
This document provides information about an exam for an electrical engineering course on probabilistic methods. It includes:
- Details about the exam such as date, time, location, and instructions.
- Four problems related to probability concepts like switching networks, conditional probability, network connectivity, and Gaussian random variables.
- Tables for timing and instructors of exam sections.
The document gives students the information needed to take a closed-book exam on probabilistic methods in electrical engineering. It provides four practice problems addressing key course concepts along with instructions for the exam.
Calc02 3 n
This document discusses continuity of functions and discontinuities. It defines a continuous function as one where the limit matches the value of the function at a point. There are two types of discontinuities: essential discontinuities which cannot be removed and removable discontinuities which can be removed by defining the function at the point of discontinuity. The intermediate value theorem states that if a function is continuous on an interval, it must take on all values between the function values at the endpoints.
07 chap3
This document introduces matrices through the theory of simultaneous linear equations. It discusses how matrices can represent systems of linear equations and how elementary row operations can be used to solve such systems. Specifically, it shows that elementary row operations preserve equivalence between systems of linear equations. It then provides examples of using row operations to determine that a system has no solution and to solve a system with an infinite number of solutions.
Secant Method
The secant method is a root-finding algorithm that uses successive secant lines to converge on a root of an equation. It begins with two initial points and finds where the secant line between those points intersects the x-axis. It then uses the intersection point as the next estimate and draws a new secant line. This process repeats until the estimate converges within a specified tolerance of the root. The secant method requires only function evaluations, unlike other methods that also require derivative evaluations. However, it may not always converge and provides no error bounds for the estimates.
False Point Method / Regula falsi method
This lecture contains False Point Method working rule, Graphical representation, Example, Pros and cons of this method and a Matlab Code.
The Whole Numbers
The document discusses whole numbers and their properties. It defines the set of whole numbers Z as including both natural and negative numbers. It discusses the signs, absolute values, and opposites of whole numbers. It also covers the rules for addition, subtraction, multiplication, and division of whole numbers, as well as the order of operations. There are examples provided for each concept. The document ends with activities involving using whole numbers to describe real-world situations and lists online resources for further information.
Application of Derivative 5
JEE Mathematics/ Lakshmikanta Satapathy/ Application of Derivative QA part 5/ Question on Absolute maximum and Minimum values of a function in a closed interval solved with the related concepts
Quadratic functions
This document describes how to transform quadratic functions from general form to standard form in three steps:
1) Factor out the leading coefficient a from the first two terms.
2) Complete the square of the factored quadratic expression.
3) Factor the completed square and combine like terms.
Examples of transforming specific quadratic functions like f(x) = x^2 - 8x + 3 and f(x) = 2x^2 + 5x - 1 are provided. An activity with 5 quadratic functions to transform to standard form is listed at the end.
6.1 system of linear equations and matrices t
This document contains examples of solving systems of linear equations using different methods:
1) A 3x3 system is reduced to a 2x2 system by elimination of one variable.
2) A 2x2 system is solved using matrix notation by putting the system into a matrix and reducing it to reduced row echelon form.
3) Two word problems are set up as systems of linear equations with variables representing costs and numbers of items, and the systems are solved.
What's hot (19)
Similar to 133467 p3a1
2. Fixed Point Iteration.pptx
This document discusses the fixed point iteration method for solving nonlinear equations numerically. It begins with an overview of the method, explaining that it involves rewriting equations in the form x=g(x) and then iteratively calculating xn+1=g(xn) until convergence. The document then provides an example of using the method to solve the equation x3+x2-1=0. It shows rewriting the equation, choosing an initial guess, iteratively calculating the next value of x, and checking for convergence. The document concludes by explaining how to implement the fixed point iteration method numerically using loops in code.
maths ppt.pdf
The document discusses Fourier series and periodic functions. It provides:
- Definitions of Fourier series and periodic functions.
- Examples of periodic functions including trigonometric and other functions.
- Integration properties used to solve Fourier series problems.
- Two examples showing the steps to obtain the Fourier series of given periodic functions in a specified interval.
maths ppt.pdf
The document discusses Fourier series and periodic functions. It provides:
- Definitions of Fourier series and periodic functions.
- Examples of periodic functions including trigonometric and other functions.
- Euler's formulae for calculating the coefficients of a Fourier series.
- Integration properties used to solve Fourier series problems.
- Two examples of determining the Fourier series for given periodic functions and using it to deduce mathematical results.
Admissions in India 2015
This document provides summaries of common special functions and polynomials, including Legendre polynomials, associated Legendre functions, Bessel functions, spherical Bessel functions, Hermite polynomials, and Laguerre polynomials. It defines the differential equations that govern each function, provides generating functions, discusses orthogonality properties, and lists some important recurrence relations and examples. The document is intended as a short survey of essential properties of these important mathematical functions.
Matlab lab manual
The document describes three numerical methods for finding the roots or solutions of equations: the bisection method, Newton's method for single variable equations, and Newton's method for systems of nonlinear equations.
The bisection method works by repeatedly bisecting the interval within which a root is known to exist, narrowing in on the root through iterative halving. Newton's method approximates the function with its tangent line to find a better root estimate with each iteration. For systems of equations, Newton's method involves calculating the Jacobian matrix and solving a system of linear equations at each step to update the solution estimate. Examples are provided to illustrate each method.
Unit iv
The document discusses various mathematical methods for interpolation and solving equations including:
1) Bisection method, iteration method, and Newton-Raphson method for finding roots of equations.
2) Finite difference methods for numerical differentiation and interpolation using forward, backward, and central difference operators.
3) Newton's forward and backward interpolation formulas for equally spaced data using finite differences.
4) Gauss interpolation and Lagrange interpolation for unequally spaced data points.
Impllicity Differentiation
This is Basic sample of Impllicity , Extreme Value Theorem, L'hopitals's Rules. In this slide is the concept of Basic Method.
Partial Fraction ppt presentation of engg math
The document discusses algebraic fractions and partial fractions. It begins by defining algebraic fractions as fractions where the numerator and denominator are polynomial expressions. It then provides examples of proper and improper algebraic fractions. The key points are that a fraction is proper if the numerator's degree is less than the denominator's, and improper otherwise. The document goes on to explain how to express improper and proper fractions as a sum of partial fractions by setting up equations and using special values of x to solve for the coefficients.
functions review
A function is a rule that assigns exactly one output to each input. An example of something that is not a function is a rule that assigns two outputs to some inputs. The vertical line test can be used to determine if a relationship represents a function - if a vertical line intersects the graph at more than one point, it is not a function. Polynomial functions have the general form f(x) = Axn + Bxn-1 + ... + Tx + U. To sketch the graph of a polynomial function, one finds the x-intercepts by setting the function equal to 0 and solving for x, determines the end behavior by looking at the highest power term, finds the multiplicity of each x-intercept, finds
Zero Theorem and Rational Roots Presentation
Zeroes, also called roots, of a function are input values that produce an output of zero. The zeroes of a polynomial function P(x) can be found by factoring P(x) into its linear factors. A polynomial of degree n will have n complex zeroes. A zero is considered a multiple zero if its linear factor repeats, increasing the zero's multiplicity. The Rational Zero Theorem states that if a polynomial with rational coefficients has rational zeroes, they must be integers that are factors of the constant term divided by factors of the leading coefficient.
Gr10 piecewise functions
This document discusses different types of piecewise functions including:
- Piecewise functions which use separate equations depending on the domain values. For example, one equation for when x ≤ 1 and another for when x > 1.
- An example problem evaluating a piecewise function at different x values and determining which equation to use.
- Graphing a piecewise function involves using one equation's graph for values below a breaking point, and another equation's graph for values at or above the breaking point.
- Greatest integer functions which return the greatest integer less than or equal to the input value. An example graph of y = [x] + 2 is shown and evaluated in a table.
Modul 3 quadratic function
This document provides information about quadratic functions including:
1) The general form of a quadratic function is f(x) = ax2 + bx + c, where a, b, c are constants and a ≠ 0.
2) Characteristics of quadratic functions include involving one variable only and the highest power of the variable being 2.
3) Examples are provided to demonstrate recognizing quadratic and non-quadratic functions based on their form.
Roots Of Polys
This document discusses how to find all the roots, or zeroes, of a polynomial function. It explains that there are typically real and imaginary roots. To find them, one should graph the function, find where it crosses the x-axis for real roots, and use synthetic division and the quadratic formula to factor the polynomial into linear and quadratic factors corresponding to its roots. Examples are provided to illustrate the process of finding all roots of different polynomial functions.
Dirty quant-shortcut-workshop-handout-inequalities-functions-graphs-coordinat...
The document contains a collection of quantitative reasoning questions from various topics such as sets, averages, exponents, inequalities, functions, and maximum-minimum problems. The questions range in difficulty from easy to moderate. Solutions or explanations are provided for some questions to illustrate the thought processes. The overall document serves as a practice resource for the Quantitative Ability section of certain exams.
Exponential functions
This document discusses exponential functions and their key characteristics:
1. Exponential functions have the independent variable in the exponent.
2. They have domains of all real numbers and ranges of positive real numbers.
3. They do not have x-intercepts but always have a y-intercept of (0,1).
4. Their graphs are always increasing and have a horizontal asymptote at y=0 as x approaches negative infinity.
X01 Supervised learning problem linear regression one feature theorie
1. The document describes supervised learning problems, specifically linear regression with one feature. It defines key concepts like the hypothesis function, cost function, and gradient descent algorithm.
2. A data set with one input feature and one output is defined. The goal is to learn a linear function that maps the input to the output to best fit the training data.
3. The hypothesis function is defined as h(x) = θ0 + θ1x, where θ0 and θ1 are parameters to be estimated. Gradient descent is used to minimize the cost function and find the optimal θ values.
Chapter 3 - Inverse Functions.pdf
This document discusses inverse functions. It begins by defining one-to-one functions and inverse functions. A function f is one-to-one if it passes the horizontal line test. The inverse function f^-1 has the domain and range swapped and satisfies the equation f(x) = y if and only if f^-1(y) = x. Examples are provided of finding inverse trigonometric, hyperbolic, and other functions. The document concludes with exercises involving evaluating functions, finding inverse functions, and using function composition to determine if functions are inverses.
EPCA_MODULE-2.pptx
To factor a polynomial using greatest common factors (GCF):
1. Find the GCF of the coefficients and of the variables.
2. The GCF is the factored form of the polynomial.
3. Checking the factored form using the distributive property verifies the correct factorization.
maths_formula_sheet.pdf
This document provides information on mathematical concepts and formulas relevant to economics, including:
- Exponential functions such as y=ex and their graphs showing exponential growth and decay
- Quadratic functions of the form y=ax2+bx+c and total cost functions
- Differentiation rules for common functions like exponentials, logarithms, and the product, quotient and chain rules
- Integration basics and formulas for integrating common functions
- Concepts like inverse functions, the mean, variance and standard deviation in statistics
- Information is also provided on fractions, ratios, percentages, and algebraic rules involving exponents, logarithms and sigma notation.
Similar to 133467 p3a1 (20)
Dirty quant-shortcut-workshop-handout-inequalities-functions-graphs-coordinat...
Dirty quant-shortcut-workshop-handout-inequalities-functions-graphs-coordinat...
X01 Supervised learning problem linear regression one feature theorie
X01 Supervised learning problem linear regression one feature theorie
More from Benjamín Joaquín Martínez
Sistemas de detección de intrusiones.pdf
Los sistemas de detección de intrusiones (IDS) supervisan pasivamente el tráfico de red sin afectar el flujo de paquetes. Los sistemas de prevención de intrusiones (IPS) operan en línea y pueden detectar y detener ataques al analizar cada paquete antes de que llegue a su destino. Ambos sistemas ayudan a proteger las redes de amenazas internas y externas.
Portafolio ingles.pdf
Este documento presenta varios temas de gramática inglesa avanzada. Brevemente describe el uso del pasivo, las palabras "for", "since" y "ago", el presente perfecto, los tiempos verbales para narrar eventos pasados como el pretérito imperfecto y pretérito indefinido, y la especulación y deducción con verbos modales. Proporciona ejemplos para ilustrar cada punto y cita fuentes para más información.
Tabla de llamadas para linux x86_64 bits.pdf
This document lists system calls and their number codes used in Linux. Some key system calls include read, write, open, close, stat, poll, mmap, mprotect, munmap, brk, and exit.
Sistema de registro con php
El documento describe el proceso de configurar una base de datos MySQL llamada "congreso" con dos tablas ("administradores" y "estudiantes") para un proyecto de sitio web de congreso estudiantil alojado en GitHub. Incluye instrucciones SQL para crear la base de datos y tablas e insertar datos de prueba. Luego explica cómo acceder al sitio web a través de XAMPP y probar las credenciales de inicio de sesión para administradores y estudiantes.
compiladores6Benjamin133467.pdf
El documento presenta gramáticas con atributos para evaluar el valor de números enteros y decimales dados por gramáticas, y para verificar que un árbol binario está ordenado mediante el uso de atributos. Se definen reglas semánticas para calcular valores y comprobar el orden de los subárboles en función de los valores de los nodos.
Compiladores5_Benjamin133467.pdf
Este documento presenta una gramática para secuencias simplificadas de sentencias y analiza su análisis sintáctico. Construye el DFA LR(0), la tabla SLR(1) y muestra el análisis de la cadena "S;S;S" usando un analizador SLR(1). Finalmente, pregunta si la gramática es LR(0) y cómo podría diferir un análisis LR(0) de uno SLR(1).
133467 compiladores 4.pdf
The document provides pseudocode for parsing arithmetic expressions using a bottom-up recursive descent parser based on a given grammar. It includes pseudocode for evaluating expressions, handling operators, and matching expected tokens. It also shows the parsing actions for three example arithmetic expressions using a given LL(1) parsing table.
133467_COMPILADORES3.pdf
El documento presenta una gramática para expresiones aritméticas y derivaciones por la izquierda y árboles sintácticos abstractos para tres expresiones diferentes según la gramática dada. También incluye declaraciones de tipo C para un árbol sintáctico abstracto correspondiente a otra gramática y un ejemplo de árbol sintáctico para esa gramática. Finalmente, muestra que una solución propuesta para resolver la ambigüedad del else no es efectiva al seguir siendo ambigua.
133467_COMPILADORES2
El documento presenta dos versiones de pseudocódigo para implementar un DFA para comentarios en C. Una versión usa el carácter de entrada como prueba externa y el estado como prueba interna, mientras que la otra hace lo opuesto. El autor preferiría la primera organización si ciertos caracteres de entrada no llevaran directamente al siguiente estado o si hubiera un carácter de escape que moviera a cualquier estado al estado de aceptación.
COMPILADORES1.pdf
El documento discute varios temas relacionados con compiladores, incluyendo la generación de árboles sintácticos y de análisis, el número de pasadas que realiza un compilador, y las optimizaciones de incorporación y propagación de constantes.
Algoritmos de búsqueda.pdf
El documento describe dos algoritmos de búsqueda ciega, DFS y BFS. Explica que ambos algoritmos encontrarían la ruta 7 → 6 → 2 mostrada en rojo en el grafo dado, ya que expanden los nodos en el mismo orden sin importar el algoritmo.
Logica proposicional
(1) La probabilidad de que dos personas sean hermanos antes de saber su apellido es 0.1.
(2) Si son hermanos, la probabilidad de que tengan el mismo apellido es 0.9. Si no son hermanos, es 0.1.
(3) Usando la fórmula de Bayes, la probabilidad de que sean hermanos dado que tienen el mismo apellido (P(h|s)) es 0.9.
Lenguajes para dispositivos moviles 133467
El documento describe varios lenguajes de programación populares para desarrollar aplicaciones móviles, incluyendo Java y Kotlin para Android, Swift y Objective-C para iOS, y lenguajes multiplataforma como JavaScript, TypeScript, C#, C, C++, Python y Ruby.
Bd distribuidas
El documento trata sobre varias tecnologías para bases de datos distribuidas, incluyendo CORBA, DCOM, RMI, Data Mining y OLAP. CORBA permite que objetos escritos en diferentes lenguajes se comuniquen a través de la red de forma transparente. DCOM es una extensión de COM que permite la comunicación de objetos entre máquinas remotas. RMI es una tecnología de Java para permitir la invocación remota de métodos entre objetos distribuidos. Data Mining involucra el uso de técnicas estadísticas y de
diseño de bases de datos distribuidas
Este documento describe los conceptos fundamentales de las transacciones distribuidas, incluyendo las propiedades ACID, los tipos de transacciones, los modelos de estructura de transacciones, y los protocolos y algoritmos relacionados con la confiabilidad, concurrencia y control de réplicas en sistemas distribuidos. También explica los conceptos básicos de commit, abort y rollback en el manejo de transacciones.
procesamiento de consultas distribuidas
El documento describe los desafíos del procesamiento de consultas en ambientes distribuidos en comparación con los ambientes centralizados, como seleccionar los mejores sitios para procesar datos para minimizar los costos de E/S, CPU y comunicación. También discute opciones como optimizar consultas individuales versus múltiples consultas, y cómo factores como la complejidad de operaciones algebraicas, estadísticas de base de datos y tipo de red pueden afectar la optimización.
Algoritmo de INGRES
Índice
Algoritmo de INGRES…………................................................................................................ 1
Algoritmo de System R……………………………………………………………………………………………………… 3
Algoritmo R* ……………………………………………………………………………………………………………………. 5
Fragmentación
La fragmentación consiste en dividir una relación global en subconjuntos o fragmentos, donde cada fragmento contiene tuplas con propiedades comunes. Existen dos tipos de fragmentación: horizontal, donde la relación se divide en fragmentos basados en una condición de selección; y vertical, donde los atributos se dividen en grupos y los fragmentos se obtienen proyectando la relación global sobre cada grupo de atributos.
Modelo cliente servidor
Un sistema cliente/servidor tiene dos partes principales: el servidor o backend que ejecuta el SGBD, y el cliente o frontend que son las aplicaciones que interactúan con el usuario. Los clientes pueden ser aplicaciones creadas por los usuarios o herramientas provistas por el proveedor. El servidor soporta funciones básicas de base de datos y puede ser iterativo o concurrente, procesando consultas de clientes de forma secuencial o simultánea respectivamente. Las arquitecturas cliente/servidor pueden tener dos o tres capas.
Arquitectura de bases de datos distribuidas
La arquitectura de bases de datos distribuidas define la estructura de un sistema que ofrece transparencia de datos, independencia lógica y física a través de la distribución de datos en múltiples sitios. Estos sistemas distribuidos pueden ser homogéneos, con una sola colección de datos, o heterogéneos, con múltiples colecciones de datos y usuarios locales y globales que acceden a datos almacenados en diferentes sitios.
More from Benjamín Joaquín Martínez (20)
Recently uploaded
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Levelised Cost of Hydrogen (LCOH) Calculator Manual
The aim of this manual is to explain the
methodology behind the Levelized Cost of
Hydrogen (LCOH) calculator. Moreover, this
manual also demonstrates how the calculator
can be used for estimating the expenses associated with hydrogen production in Europe
using low-temperature electrolysis considering different sources of electricity
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Power Electronics- AC -AC Converters.pptx
This PPT is about AC-AC Converters, including AC Voltage controllers and Cycloconverters, their types, and control.
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
Recently uploaded (20)
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Levelised Cost of Hydrogen (LCOH) Calculator Manual
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
133467 p3a1
- 1. Aproxima el valor de la derivada de la siguiente función cuando x=1 usando diferencias progresivas, regresivas y centrales. Utiliza en todos los casos h=0.1.Calcula el error cometido comparando con el valor exacto al sustituir en la derivada de la función que se te indica Valor real de la derivada = −18+50𝑥+18𝑥2 −18𝑥3 (𝑥2+3)3 −18 + 50(1)+ 18(1)2 − 18(1)3 ((1)2 + 3)3 −18 + 50 + 18 − 18 (1 + 3)3 −18 + 50 (4)3 32 64 = 0.5
- 2. Diferencias progresivas : f’(1)=( f(1+0.1) – f(1) ) / 0.1 f(1.1) = ( 3𝑥−1 𝑥2 +3 )2 = ( 3(1.1)−1 1.12+3 )2 = ( 2.3 4.21 )2 = 𝟎.𝟐𝟗𝟖𝟒𝟔𝟑𝟔𝟕𝟑𝟕𝟓𝟒𝟗𝟒𝟑𝟖𝟕 f(1)= ( 3(1)−1 12+3 )2 = ( 2 4 )2 = 0.25 f’(1)=( 0.29846367375494387–0.25) / 0.1 = 0.4846367375494387 Diferencias regresivas f’(1)=( f(1) - f(1- 0.1) ) / 0.1 = ( f(1) - f(0.9) ) / 0.1 f(0.9) = ( 3𝑥−1 𝑥2 +3 )2 = ( 3(0.9)−1 0.92 +3 )2 = ( 1.7 3.81 )2 = 0.19908928706746304 f’(1)=( 0.25 - 0.19908928706746304)/ 0.1 = 0.5091071293253696
- 3. Diferencias centrales f’(1)= ( f(1.1) – f(0.9) )/ 2h = ( 0.29846367375494387 - 0.19908928706746304 ) / 2*0.1 = 0.09937438668748083/0.2 = 0.49687193343740416 Valor real de la derivada = 0 .5 Error Progresivas 0.4846367375494387 0.0153632624505613 Regresivas 0.5091071293253696 0.009107129325369612 Centrales 0.49687193343740416 0.0031280665625958437