1. Page 1 of 5
ANDY B. ESPADA
Ambulong, Batangas City
Philippines
Mobile No. +63908-732-3828/+63939-379-2579
Email: andy_espada@yahoo.com/andyespada56@gmail.com
Position Desired: Document Controller / NDT Inspector
WORK EXPERIENCE
Work Period : August 19, 2013 – UP to Present
Project : 2X150 MW SLPGC CFB Power Plant Project Phase 1
Employer : DM Consunji Inc. - SLPGC
Location : Brgy.Dacanlao, Calaca, Batangas City, Philippines
Position Held : Mechanical Inspector (Boiler Inspector)/Document Controller
Reviewing of Project Method Statement prior to Installation sequence and monitoring
installation inspection as per design drawing.
Inspection and Test Plan (ITP) as per recommended construction practice.
Witnessing the leveling, centering, elevation and alignment inspections of Boiler Headers
and Drum.
Witnessing of diagonal inspection of Boiler wall panel prior to tube to header and tube to
tube fit-up and welding.
Verfication and site walk-down inspection of all assembled materials after erection.
Encoding of Pipe and Welding Log Reports submitted by the sub-contractor.
Encoding of Tube and Welding Log Reports submitted by the sub-contractor.
Hydrostatic Testing Package preparation.
Making of Daily and Weekly Inspection Accomplishment Report as per Standard
Operating Procedure by the QA/QC Department.
Attending of in-house or Department Sessions like TEAM Work, RCA, PDCA Application,
Leadership and Team Building.
Application of Codes and Standards to the project as per projet specification.
Work Period : July 12, 2012 - June 15, 2013
Project : Jetty Ofshore PNG-LNG
Employer : Orion (Bam Clough)
Location : Papua New Guinea
Position Held : GRE Bonder
Selects type and size of pipe, and related materials and equipment, such as supports,
hangers, and hydraulic cylinders, according to specifications.
Inspects work site to determine presence of obstructions and to ascertain that holes cut
for pipe will not cause structural weakness.
Plans installation or repair to avoid obstructions and to avoid interfering with activities of
other workers.
2. Page 2 of 5
Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting
machine.
Bends pipe, using pipe bending tools and pipe bending machine.
Assembles and installs variety of metal and nonmetal pipes, tubes, and fittings, including
iron, steel, copper, and plastic.
Secures pipes to structure with brackets, clamps, and hangers, using hand tools and
power tools.
Increases pressure in pipe system and observes connected pressure gauge to test
system for leaks.
Laminate GRE pipe
Bonding of GRE pipe using epoxy adhesive
Assigned as sandblaster painter of post pipe on Jetty
Sandblast of field weld joints of post pipe plate and post pipe plate and post pipe
damages on loading station and sub-station
Sandblast of field weld joints of pipe and mechanical damages base plate of module
Touch up painting of module, pipes support etc.
Assigned as file jacketing of pipe and operate the press high draulic machine for
jacketing
Strictly follow technical specification of painting related process
Strictly follows quality aspects, quantity and safety
Obey superiors’ production for the week
Work Period : May 06, 2011 – May 09, 2012
Project : PNG - LNG
Employer : Daewoo Engineering & Construction Ltd.
Location : Papua New Guinea
Position Held : GRE Bonder
Selects type and size of pipe, and related materials and equipment, such as supports,
hangers, and hydraulic cylinders, according to specifications.
Inspects work site to determine presence of obstructions and to ascertain that holes cut
for pipe will not cause structural weakness.
Plans installation or repair to avoid obstructions and to avoid interfering with activities of
other workers.
Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting
machine.
Bends pipe, using pipe bending tools and pipe bending machine.
Assembles and installs variety of metal and nonmetal pipes, tubes, and fittings, including
iron, steel, copper, and plastic.
Secures pipes to structure with brackets, clamps, and hangers, using hand tools and
power tools.
Increases pressure in pipe system and observes connected pressure gauge to test
system for leaks.
Laminate GRE pipe
Bonding of GRE pipe using epoxy adhesive
3. Page 3 of 5
Work Period : November 8, 2009 – December 27, 2010
Project : Qatar Fertilizer Expansion 5 & 6
Employer : Hyundai Engineering & Construction Co., Ltd.
Location : 50167 Mesaieed, Qatar
Position Held : Pipe Fitter / Laminator
Selects type and size of pipe, and related materials and equipment, such as supports,
hangers, and hydraulic cylinders, according to specifications.
Inspects work site to determine presence of obstructions and to ascertain that holes cut
for pipe will not cause structural weakness.
Plans installation or repair to avoid obstructions and to avoid interfering with activities of
other workers.
Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting
machine.
Bends pipe, using pipe bending tools and pipe bending machine.
Assembles and installs variety of metal and nonmetal pipes, tubes, and fittings, including
iron, steel, copper, and plastic.
Secures pipes to structure with brackets, clamps, and hangers, using hand tools and
power tools.
Increases pressure in pipe system and observes connected pressure gauge to test
system for leaks.
Laminate GRV or GRP and GRE pipe
Bonding of GRE pipe using epoxy adhesive
Work Period : February 5, 2009 – March 7, 2009
Project : Shutdown in Pilipinas Shell Petroleum Corporation
Employer : Petroleum S. N.
Location : Tabangao Ambulong, Batangas City, Philippines
Position Held : Mechanical Fitter
Secure parts fit on the pipe before assembling them.
Read blueprints to help understand the correct assembly method.
Inspects work site to determine presence of obstructions and to ascertain that holes cut
for pipe will not cause structural weakness.
Secure work permit before assembling.
Assemble and fit parts assigned following the blueprint.
Wearing complete personal protective equipment while on work site.
Follow rules and regulations given by the safety officer.
November 10, 2005 – May 24, 2007
Employer AG&P (Atlantic, Gulf & Pacific Company of Manila, Inc.)
Location San Roque, BauanBatangasPhilippines
4. Page 4 of 5
Position Held Pipe Fitter
Selects type and size of pipe, and related materials and equipment, such as supports,
hangers, and hydraulic cylinders, according to specifications.
Inspects work site to determine presence of obstructions and to ascertain that holes cut
for pipe will not cause structural weakness.
Plans installation or repair to avoid obstructions and to avoid interfering with activities of
other workers.
Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting
machine.
Threads pipe, using pipe threading machine.
Assembles and installs variety of metal and nonmetal pipes, tubes, and fittings, including
iron, steel, copper, and plastic.
Connects pipes, using threaded, caulked, soldered, brazed, fused, or cemented joints,
and handtools.
Secures pipes to structure with brackets, clamps, and hangers, using handtools and
power tools.
Installs and maintains hydraulic and pneumatic components of machines and equipment,
such as pumps and cylinders, using handtools.
May weld pipe supports to structural steel members.
September 8, 2003 – August 11, 2005
Employer Rey-tech Construction & Development Corporation
Location LaPazSt.,(Extension),Aplaya,BauanBatangasPhil.
Position Held Pipe Fitter
Selects type and size of pipe, and related materials and equipment, such as supports,
hangers, and hydraulic cylinders, according to specifications.
Inspects work site to determine presence of obstructions and to ascertain that holes cut
for pipe will not cause structural weakness.
Plans installation or repair to avoid obstructions and to avoid interfering with activities of
other workers.
Cuts pipe, using saws, pipe cutter, hammer and chisel, cutting torch, and pipe cutting
machine.
Threads pipe, using pipe threading machine.
Assembles and installs variety of metal and nonmetal pipes, tubes, and fittings, including
iron, steel, copper, and plastic.
Connects pipes, using threaded, caulked, soldered, brazed, fused, or cemented joints,
and handtools.
5. Page 5 of 5
Secures pipes to structure with brackets, clamps, and hangers, using handtools and
power tools.
Installs and maintains hydraulic and pneumatic components of machines and equipment,
such as pumps and cylinders, using handtools.
May weld pipe supports to structural steel members
EDUCATIONAL ATTAINMENT:
College Level - Bachelor of Science major in Industrial Engineering
Year 1996 – Y2000
Non Destructive Test / Magnetic Testing Particles Test (NDT/MTPT) Level 1
PERSONAL INFORMATION:
Born on November 30, 1979
Married with two kids