1. KENNETH THOMPSON
4862 W Elaine Drive, West Valley City, UT 84120 ♦ Mobile: (315) 527-1724♦
♦ Email: brotk2001@yahoo.com
Summary
 Over 13 years of pipefitting experience.
 Proven ability to follow instructions, specifications and blueprint readings.
 Familiar with Naviswork software and AutoCAD for piping software systems.
 Excellent knowledge of the principles, methods and techniques in the pipefitting trade.
 Profound knowledge of tools and equipment of the pipe and welding skill trade and safety practices.
 Deep knowledge of the occupational hazards and safety precautions of the trade.
 Strong ability to plan and perform work involving the installation, modification and repair of new and
existing piping systems.
Education/Certifications
OSHA 30 & OSHA 10 2015
NITC JOURNEYMAN/PIPEFITTER CERTIFICATION 2015
MSHA/OSHA CERTIFIED 2015
NCCER CERTIFIED PLUS JOURNEYMAN FITTER 2014
TWIC/ RSO 2010
UA LOCAL UNION 250 JOURNEYMAN/FITTER 2007
WELL SERVICES DRILLING SCHOOL (Floorman/Rostabaut) 1996
Professional Experience
7/2015 to Present: Lauren Engineering (Holly Refinery)-Wood Cross, UT
Journeyman Pipe Fitter
• Responsible for laying out and setting equipment for process pipe installation.
• Drawing isometrics for over a 100 client updates and progress.
3/2015 to 6/2015: Micron IM Flash-Lehi, UT
Journeyman Pipe Fitter
• Responsible for laying out and setting equipment for process pipe installation.
• Drawing isometrics for client updates and progress.
7/2014 to 3/2015: Brahma Group (CC & V Mine)–Cripple Creek, CO
Piping General Foreman
• Responsible for building piping packages and drawing as builds for RFI’s.
• Accountable for managing and issuing material and mechanical components to foreman and recording
progress of spools and supports being erected.
• Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
• Initiating hydro static test on all spools built on site and recording and tracking heat trace
footage on process piping.
9/2013 to 6/2014: Plant Performance Services (Tesoro Refinery) - Salt Lake City, UT
Journeyman Pipefitter & Material Coordinator

2. • Received Equipment and sort materials for VRU Expansion Project.
• Obtained equipment and categorized materials for the Crude Unit Expansion as well.
• Accountable for monitoring and storage of equipment and materials.
10/2012 to Present: Brahma Group (KUC-MAP) Magna, UT
Journeyman Pipefitter
• Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
• Layout cut and prepare pipe for isometric drawings issued for construction.
• Cut, threaded,and hammered pipe to specifications, using tools such as saws,cutting torches, and pipe
thread.
• Measured and marked pipes for cutting and threading.
• Laid out full scale drawings of pipe systems, supports, and related equipment, following
blueprints.
9/2012 to 10/2012: Fagan Inc. (KUC-MAP) Magna, UT
Journeyman Pipefitter
• Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
• Layout cut and prepare pipe for isometric drawings issued for construction.
• Cut, threaded,and hammered pipe to specifications, using tools such as saws,cutting torches, and pipe
thread.
• Measured and marked pipes for cutting and threading.
• Laid out full scale drawings of pipe systems, supports, and related equipment, following
blueprints.
11/2011 to 8/2012: P2S World (Tesoro Refinery) Kapolei, HI
Journeyman Pipefitter
 Laid out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
 Layout cut and prepare pipe for isometric drawings issued for construction.
 Cut, threaded,and hammered pipe to specifications, using tools such as saws,cutting torches, and pipe
thread.
08/2011 to 10/2011: Fagan (Nack Power) Cushing, TX
Pipefitter
 Administered and laid out crews for installation of utility piping and process systems piping which
included chill water,condensate water,low pressure steam,compressed air and high pressure steam.
 Installation of piping and fabrications of supports for process pipe systems.
04/2011 to 08/2011: Aerotek (Leprino Foods) Greeley, CO
General Foreman
 Managed and laid out crews for installation of utility piping and process systems piping which will
include chill water,condensate water,low pressure steam,compressed air and high pressure steam.
 Installation of piping and fabrications of supports for process pipe systems.
03/2011 to 04/2011: Starcon Int’l (Conoco Phillips Turnaround) Concord, CA
Pipefitter
 Laid out full scale drawings of pipe systems, supports, and related equipment, following
blueprints.
 Layout cut and prepare pipe for isometric drawings issued for construction.

3.  Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches,
and pipe thread.
11/2010 to 02/2011: S & B Engineering Contractors (Shell Motiva) Port Arthur, TX
Pipefitter
 Laid out full scale drawings of pipe systems, supports, and related equipment, following
blueprints.
 Layout cut and prepare pipe for isometric drawings issued for construction.
 Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches,
and pipe thread.